Aerial Cam Unit General Description of UCMSV
|
|
- Shon Bradley
- 5 years ago
- Views:
Transcription
1 erial General Description of Y, 8, 110, 16, 200, 0, 0, 30 and mm mounting widths are available. Y vailable angles are from 0 to 7 in increments of. Y Gas spring can be removed from the cam whilst in the die/press. Y Complying with VDI- specification. q/8/110 Structure and ssembly / Disassembly :!4 8 :!0 110:! q Specifications Mounting Surface Working ngle Travel width height kn(tonf) 7 (7.6) 100 (10.2) 10 (1.3) Mounting Surface Working ngle Travel width height kn(tonf) 171 (17.) 218 (22.2) 284 (29.0) Mounting Surface Working ngle Travel width height kn(tonf) 364 (37.1) 40 (41.3) 40 (4.9) w :!8 8 :!4 110:!6 UDisassembly method of / 8 / 110 1) Remove hexagon socket head bolt ( a ) and stopper plate (:!8, 8:!4, 110:!6). 2) Remove cam slider (w) from cam holder (:!4, 8:!0, 110:!1) at rear of cam. Ussembly method of / 8 / 110 1) ssemble components in the reverse order to which they were removed. YMake sure that there is no foreign matter on the slide surfaces before assembly. YThe clearance between the cam slider and the cam holder is carefully controlled. Check that the serial number stamped on both parts is the same. YPlease ensure that all bolts removed are re-installed and tightened. a 1638
2 erial General Description of q16/200/0/0/30/ Structure and ssembly / Disassembly q/8/110 Removing gas spring t 16:@0 200n:!7!4 a C Remove the screws of the spring stopper Slide out the spring stopper Remove the gas spring backward q16/200/0/0/30/ Removing gas spring C D UDisassembly method of 16 / 200 / 0 / 0 / 30 / 1) Remove safety plate (16:@0, 200n:!7). 2) Remove hexagon socket head bolt ( a ) and stopper plate(!4). 3) Remove cam slider (@1) from cam holder (t) at rear of cam. -Screwthe mounting lever -Remove the screws of the spring stopper Slide out the spring stopper C Remove the gas spring backward D Ussembly method of 16 / 200 / 0 / 0 / 1) ssemble components in the reverse order to which they were removed. YMake sure that there is no foreign matter on the slide surfaces before assembly. YThe clearance between the cam slider and the cam holder is carefully controlled. Check that the serial number stamped on both parts is the same. YPlease ensure that all bolts removed are re-installed and tightened
3 170 erial (00 n4 ) 37a0. a0.1 4 G 200a0.0 C @7 C Ca a0.0 a0.0 30a0.1 a0.0 0a0.02 q 6a0.0 11a0.0 Ha0.0 10a a0.0 2-h20H7 #7 17a0.0 4-h22-h32 4-h22-h32 27a a0.0 E F 1 #0 $2!0oy (W)!3!0o Travel C E F G H J kn Mark Code NF 40 Without gas spring but accessories for installation of each type are included. Catalog No. (W) PS qspring Specification (Qty 3) Spring Type Spring Force N(kgf) PS Initial Force Final Force Model 323 (3298.) X TD (LLER) GD 00n4 o 3100 (3168.4) U TO (DDCO) GS (3363.6) SFC (SDT) Option Specification Dedicated key is attached. (It is not assembled to the main unit) Nitrogen gas is not charged. pplicable to, GS and GD only. Return Force N(kgf) Catalog No. (W) (424.1) (41.1) (40.) (449.4) (4484.8) (4473.9) (4462.6) (441.2) (4439.6) (4428.0) 4 ー ー ー NF YParts list is shown in p.1711 YCam diagram is shown in p.1709 Y NF : Gas Springs are not filled with nitrogen gas if delivery is by air freight. Spring Type PS GS GD NGP q ey Specification o0.01 o (with M8p1 bolt) 2 h9 h
4 erial (0 n7 ) 410a a0.0 4-h22-h32 2-h20H7 Travel C E F G S o o o o o a0. 4 G a a0.0 C Ca0.1!!4 30a0.1 0 a0.0 3a0.02 0a0.02 @7 S!7 q # a h22-h a0.02 F E 6a (W)!0o!3 kn Mark Code NF 40 Without gas spring but accessories for installation of each type are included. Catalog No. (W) PS qspring Specification (Qty 3) Spring Type Spring Force N(kgf) PS Initial Force Final Force Model 323 (3298.) X TD (LLER) GD 0n o 3100 (3168.4) U TO (DDCO) GS (3363.6) SFC (SDT) 81 (3120.) X TD (LLER) GD 6 o (3477.6) U TO (DDCO) GS 3137 (3199.7) SFC (SDT) (2938.8) X70-00-TD (LLER) GD 70Y7 o (289.2) U TO (DDCO) GS 2947 (07.7) SFC.70.0 (SDT) Option Return Force N(kgf) Catalog No. (W) (4416.) (4803.4) 2028 (8.9) 793 (693.1) (618.4) (7399.2) 7 Specification Dedicated key is attached. (It is not assembled to the main unit) Nitrogen gas is not charged. pplicable to, GS and GD only. YParts list is shown in p.1711 YCam diagram is shown in p.1709 Y NF : Gas Springs are not filled with nitrogen gas if delivery is by air freight. Spring Type PS GS GD NGP q ey Specification o0.01 o h9 h14 6a0.0 2-h20H7 11a0.0 2a0.0 ー ー ー NF (with M8p1 bolt)
5 1 10 erial Cam Diagram
6 erial Table of Components qkm00 n7 No. Description Qty Material and Remark q Cam Driver 1 GGG t Cam Holder 1 GGG y ase Plate R 1 S4C u Slide Plate(VSM-1) 2 ronze with Graphite o ey 2 SS!0 ey 4 SS!3 ase Plate L 1 S4C!4 Stopper Plate 1 S4C! Stopper 4 Urethane(PCU20)!7 Safty Plate 2 S4C!8 Lock lock 1 SS!9 Hexagonal olt 1 SCM43 Hexagonal Nut 1 SCM43 Cam Slider 1 Spring Guide 1 Gas Spring Guide Plate 1 Slide Plate(VSM-14) 2 ronze with Slide Plate(VSM-31) 2 ronze with Slide Plate(VSM-34) 2 ronze with Slide Plate(VSM-) 4 ronze with Graphite #0 Positive Return Plate 2 S4C #7 Cam Slide Guide(Lower) 1 S4C $2 Gas Spring 3 Refer to the specification table olts for assembly are not indicated
Aerial Cam Unit General Description of UCMSV
erial General Description of VDI- STNDRD Y, 8, 110, 16, 200, 0, 0, 30 and 400mm mounting widths are available. Y vailable angles are from 0 to 7 in increments of. Y Gas spring can be removed from the cam
More informationDouble Cam Unit General Description of WCMSH / WCMS
Double General Description of WCMSH / WCMS FOR NEGATIVE ANGLE FORMING Double cam unit WCMS series is the optimum part for drilling the flat countersunk head screw holes at the door inner panel lock. UDesignation
More informationCam width 72 Long Stroke
71 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 24.(2.) 36.8(3.7) 49.0(.0) Catalog No. W o K o Spring o Option VACSL o o ISO VACYL
More informationCam width 58 Short Stroke
1.kN Cam width Short Stroke 697 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 18.6(1.9) 27.9(2.8) 37.2(3.8) Option Option Code SC
More informationCam width 46 Short Stroke
599 Grade Working force [ kn (tonf) ] 1,000,000 1,000,000 300,000 stroke stroke stroke Standard Center Center Stroke Catalog No. Cam width W 14.7(1.5).1(2.2) 29.4(3.0) Short VACWS K 00n80 (5-degree increments)
More informationKHC-600D 9 Parts list 9.1 Distributor unit
KHC-600D 8.2 Assembly drawing figure 8-2 1 40 41 8 KHC-600D 9 Parts list 9.1 Distributor unit 28 4 31 22 32 14 10 2 21 33 26 46 35 14 43 11 23 36 42 29 5 45 25 23 17 27 14 24 47 6 37 3 34 19 20 18 30 37
More informationCOMPONENTS FOR LIFTING AND DIE STORING
COMPONENTS FO IFTING N IE STOING IFTING S HF 1 COMPONENTS FO IFTING N IE STOING 1 Caulking at two points φ1 1 3 IFTING S HF IFTING EYE OTS CHI CST-IN IFTING OTS CSN HOOKS OT TYPE CHN Page 148 149 149 1
More informationDesign & Selection. Installation & Adjustment
U SM Series WRNING This product must not be used submerged in water, oil or powder, or where coolant, coolant fluid or swarf, etc., may come in contact. lways incorporate an interlock in the control circuit
More informationBRAKE E
8-1 GENERAL...8-2 SPECIFICATIONS...8-6 COMPONENTS...8-7 FRONT BRAKE...8-12 DISASSEMBLY INSPECTION REASSEMBLY (Pn1, Cu2 3 TON SERIES)...8-12 DISASSEMBLY INSPECTION REASSEMBLY (Pn2 3 TON SERIES)...8-17 BRAKE
More informationPARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC.
SHIBAURA DIESEL ENGINE MODEL: N843 and N843L PARTS MANUAL SUPPORTED BY HUSTLER TURF EQUIPMENT AND EXCEL INDUSTRIES, INC. Table of Contents Chapter 1 General Information....................................
More informationSine Rodless Cylinder Series RE asic Type/ø, ø, ø, ø, ø3 asic type Sine rodless cylinder (basic type) Specifications Fluid Proof pressure Maximum operating pressure Minimum operating pressure mbient and
More informationMagnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V
Magnetically Coupled Rodless Cylinder Slider Type: all ushing earing Series CY1L ø, ø, ø, ø, ø, ø, ø How to Order CY1L H 00 J79W Slider type (all bushing bearing) mm mm mm mm mm mm mm Magnetic holding
More informationCRAFTSMAN 10 in. TABLE SAW MODEL NO REPAIR SHEET
CRAFTSMAN in. TABLE SAW MODEL NO. 1.2100 REPAIR SHEET 44 144 4 Figure B 10 14 1 12 12 12 4 4 Figure A 14 1 1 1 1 4 1 4 121 2 4 140 1 11 11 11 42 1 1 120 12 21 40 4 1 141 2 4 11 SEE NOTE 11 114 0 1 2 2
More informationAluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve Series X X High fluorine resistance inimal outgassing inimal contamination from heavy metals X Q X YV ø00, ø60 XF(V) 9 ightweight, ompact arge conductance, small body luminum
More informationCompact Hydraulic Cylinder
ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch
More informationPosition locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
More informationRotary Clamp Cylinder
Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable
More informationVALVE CLEARANCE (K3-VE)
ENGINE MECHANICAL VALVE CLEARANCE (K3-VE) 25 ENGINE MECHANICAL VALVE CLEARANCE (K3-VE) INSPECTION 1. DISCONNECT NEGATIVE BATTERY TERMINAL (See page RS-164.) 2. ROVE ENGINE UNDER COVER 3. DRAIN ENGINE COOLANT
More informationPARTS LIST EARTH AUGER AGZ5000
848A8A93B0 (706) PARTS LIST EARTH AUGER AGZ5000 NOTE : 1. Use ZENOAH genuine parts specified in the parts list for repair and/or replacement. 2. ZENOAH does not warrant the machines, those which have been
More informationPARTS BREAKDOWNS DESPIECE SRS - 24
SRS - 5 S8800 OUTER ASSEMBLY SRSB- S8800 GAS SYSTEM SALAMANDER S855068000 SIERRA KNOB 60509M005 SS SCREW HEAD TRUSS M6-5 S8800 INNER ASSEMBLY SRSB- 6 60509M005 SS HEXAGONAL SCREW M X 5 S886000 BRACKET
More information11.Preparation for Overhaul
11.Preparation for Overhaul A: PROCEDURE 1) After removing the engine from body, secure it in the ST shown below. ST1 498457000 ENGINE STAND ADAPTER RH ST2 498457100 ENGINE STAND ADAPTER LH ST3 499817000
More informationMECHANICAL LINEAR ACTUATORS
MECHANICAL LINEAR MECHANICAL LINEAR (Customized Stroke) WITH ADJUSTABLE GEARBOX Part No. MAU5040SS Part No. MAUX5040SS Part No. MAG5040SS WITH ADJUSTABLE GEARBOX (Customized Stroke) Part No. MAGX5040SS
More informationTechnical Service Bulletin
Technical Service Bulletin GROUP STEERING DATE MAY 2014 NUMBER 14-ST-002-1 MODEL(S) SEE BELOW SUBJECT: MOTOR DRIVEN POWER STEERING (MDPS) COUPLING REPLACEMENT THIS TSB SUPERSEDES TSB 14-ST-002 TO ADD VELOSTER
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More information1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
More informationAluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve Series X RoHS X X Q High fluorine resistance inimal outgassing inimal contamination from heavy metals X YV ø00, ø60 XF(V) 09 ightweight, ompact arge conductance, small body
More informationHigh Rigidity/ High Precision Guide Type ø50, ø63. The use of two linear guides allows a maximum load of 320kg. (ø63) Rodless cylinder MY1BH SMC
MYHT Series High Rigidity/ High Precision Guide Type ø, ø6 The use of two linear guides allows a maximum load of kg. (ø6) Rodless cylinder MYBH SMC 2 linear guides Easy maintenance is stressed by a revolutionary
More informationP843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
More informationBUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
More informationG Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
More informationMAGNET TYPE RODLESS CYLINDERS SERIES CONTENTS
CD drawing data catalog is available. CTUTORS GENERL CTLOG MGNET TYPE RODLESS CYLINDERS SERIES CONTENTS Features 59 MRC Series Specifications 6 Order Codes 6 Inner Construction, Major Parts and Materials
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More informationRack & Panel. Miniature Rectangular / #16 Contacts /.062" Dia. / 13 Amps. MRA Series. Winchester/Retconn SPECIFICATIONS
MR Series Miniature Rectangular / #16 Contacts /.062" Dia. / 13 mps MR 34S-G MR 34P-G Hood The MR Series offers compact, lightweight and self-aligning plugs and receptacles with unusually high current
More informationD-sub Connector. Cassette base manifold SV1000/SV2000 Tie-rod base manifold SV1000/SV2000/SV3000/SV4000
D-sub Connector J Tie-rod base Cassette base pplicable series Cassette base manifold 000/000 Tie-rod base manifold 000/000//000 Number of connectors: pins MIL-C-08 Conforming to JIS-X-0 --6 For details
More informationPARTS CATALOG. Color imageruner C1030/C1022 Series. October 29, CANON Color imagerunner C1030/C1022 Series REV. 0 PRINTED IN U.S.A.
Color imageruner C1030/C1022 Series PARTS CATALOG October 29, 2010 Rev. 0 COPYRIGHT 2010 CANON INC. CANON Color imagerunner C1030/C1022 Series REV. 0 PRINTED IN U.S.A. PREFACE This Parts Catalog contains
More informationCBR600RR PARTS LIST CONTENTS INSTRUCTIONS FOR USE OF PARTS LIST INDEX
005-CBR600RR PARTS LIST CONTENTS INSTRUCTIONS FOR USE OF PARTS LIST..................................................... 3- ENGINE GROUP E- Engine power up kit.......................................................
More informationRotary Clamp Cylinder
Rotary Clamp Cylinder ø, ø, ø, ø, ø, ø, ø, ø llowable moment of inertia 3 times higher New structure! New series Overall length is the same as the existing products! Mounting dimensions are interchangeable
More informationLIQUID SYSTEM PARTS LIST
STRIKER 550 850 00 LIQUID SYSTEM PARTS LIST LIQUID SYSTEM COMPONENTS... - SPRAYBAR ATTACHMENT... BAR ASSEMBLY... SIDE SPRAY ASSEMBLY...5 -WAY SPRAY ASSEMBLY...5 LIQUID BLADDER TANK... LEVEL INDICATOR ASSEMBLY...7
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More informationSWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
More informationD I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
More informationPARTS LIST 1 REVERSIBLE HYDRAULIC PLATE COMPACTORS
PARTS LIST 1 REVERSIBLE HYDRAULIC PLATE COMPACTORS VIBRATING PLATE: VIBRATING PLATE: PARTS LIST 1 Item # Part # Description QTY Remarks 1 CPC-60-1A VIBRATING PLATE 1 2 CPC-60-2A SHOCK ABSORBER 4 3 CPC-60-3A
More informationMechanical power cylinder
Attaining thrust equivalent to a hydraulic cylinder -- with air pressure alone! New product Mechanical power cylinder MCP Series Mechanical power cylinder MCP Series CC-958A 1 Realize high thrust at any
More informationPARTS LIST MODEL: Sakura95
First Edition: November 0 MODEL: Sakura MODEL: Sakura 0 0 MODEL: Sakura KEY PARTS NO. NO. DESCRIPTION 0 0 00B0 000 0000 000 000 000000 000 00000 0000 0000 000 00 0000 00000 0000 0 00A0 0000 000 00 0A 00
More informationNEW Compact series. New KSF10 Size, Now Available Top Cover Type / Open Cover Type Lineup. For details, visit THK at Compact Series KSF
NEW ompact series ompact Series New 1 Size, Now vailable Top over Type / Open over Type For details, visit THK at www.thk.com information is updated regularly on the THK website. TLOG No.396-1E-EU ELETRI
More informationPull Action Latch Clamps
6.1 Pull ction Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
More informationPower Clamp Cylinder
Power Clamp Cylinder eries New pecial CK /M(D)UK For France CLKZ1R For Europe For North merica CKZ2N MK2T/MK2/MK C(L)KQ For sia CLK2 13 Toggle link mechanism Maintains secure and powerful support. Proximity
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationBooster Pump Control Valve
MODEL 60-7 660-7 ooster Pump Control Valve Simple Hydraulic Operation Low Head Loss Horizontal or Vertical Mounting uilt-in Check Valve Proven Reliable Design The Cla-Val Model 60-7/660-7 ooster Pump Control
More informationVALVE CLEARANCE (1NZ-FXE)
146 ENGINE MECHANICAL ADJUSTMENT 1. REMOVE REAR FLOOR BOARD NO.2 (See page 211 16) 2. REMOVE DECK FLOOR BOX REAR (See page 211 16) 3. REMOVE REAR FLOOR BOARD NO.3 (See page 211 16) 4. DISCONNECT BATTERY
More informationSERVICE BULLETIN. RS 307 May, Model change of EY15 and EY20 EY15-3, EY
SERVICE BULLETIN RS 307 May, 200 MODEL EY5-3, EY20-3 SUBJECT Model change of EY5 and EY20 PURPOSE: To improve engine reliability, better sealing of governor shaft To renew engine design and color Reduction
More informationStandard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order
Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard
More informationSLIDE TABLES CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG SLIDE TALES CONTENTS Features 979 Safety Precautions, Handling Instructions and Precautions 981 Specifications 985 Order Codes 986 Inner
More informationOwner s Manual.
www.yalesecurity.com www.yalecorbin.on.ca Contents Keys................................................................ 2 Key Bitting Specs & Pin Lengths............................................3 Combinating
More informationDetails of Option Specification Code - D091
Specification : D091 Title: Configuration of Manual Operator 1/5 Handle type operator or gear type operator shall be specified. Note) The operator shall be specified with a code in this section when receiving
More informationPOSI-LOCK. Connects the Shaft and Hub with the Wedging Action of the Tapered Surface. Mechanical Shaft Lock ETP BUSHINGS
Mechanical Shaft ock POSI-OCK Mechanical Shaft ock POSI-OCK Application Machine tool, pump, molding machine, printing machine, palletizing robot, various jigs and tools Connects the Shaft and Hub with
More informationSeries SY3000/5000 Base Mounted Manifold Stacking Type/DIN Rail Mounted Connector Box 24V. D side D. Blanking plate assembly SX A
Type N SY/ ase ounted anifold Stacking Type/DIN Rail ounted Connector ox How to Order anifold SSY SY SY Specifications Symbol Specifications With connector box (CO spec.) N With connector box ( CO spec.)
More informationSS5Y 3 05 U C6. Series SY3000/5000 Base Mounted Monifold Stacking Type/DIN Rail Mounted Individual Wiring
Type4 SY000/000 ase Mounted Monifold Stacking Type/DIN ail Mounted Individual Wiring How to Order Manifold SSY 4 0 U C6 How to Order Valve Manifold ssembly Ordering example SY000 SY000 Valve stations 02
More information6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO
More informationMAIN FRAME 86-GS PART # DESCRIPTION QTY H.H. 1/4-20 X 3/ SHCS, #10-32 X 3/ SHCS, 1/4-20
MAIN FRAME 86-GS4-4599-00 PART # DESCRIPTION QTY 99-280-7005-03 H.H. 1/4-20 X 3/4 1 99-280-7006-01 SHCS, #10-32 X 3/8 19 99-280-7006-04 SHCS, 1/4-20 X 3/4 SST 3 99-280-7007-02 FHS, 1/4-20 X 3/4 SST 19
More informationACTIVAL Three-Way Ball Valve with Threaded-End Connection
-6209 Specifications/Instructions CTIVL Three-Way all Valve with Threaded-End Connection General CTIVL Model VY5303 is a three-way ball valve with threaded-end connection (ISO 7-1: 1994). It proportionally
More informationOriginal instructions 1/15 PARTS MANUAL PMHB-550ENG.115 HYDRAULIC HAMMER HB-550
Original instructions 1/15 PARTS MANUAL PMENG.115 HYDRAULIC HAMMER TABLE OF CONTENTS 1.1. Housing unit 6 1.2. Impact unit 8 1.3. Seal set 10 1.4. Service kit 12 1.5. Service kit 2 13 1.6. Tool box 14 GENUINE
More informationPARTS REFERENCE LIST MODEL: EM-530 / 630
PARTS REFERENCE LIST MODEL: EM-530 / 630 NOTES FOR USING THIS PARTS REFERENCE LIST 1. In the case of ordering parts, it needs mentioning the following items: [ Example ] (1) Code (2) Q'ty (3) Description
More informationS-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER. Parts Navigation.
S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Parts Navigation The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/jpn/
More information3 times the allowable moment of inertia
otary lamp ylinder Series Double Guide Type otation mechanism uses guide rollers. otation mechanism Non-rotating accuracy: ±0.9 ±0. (lamp part) Values for ø3, ø. omparison with our series otation angle:
More information3. Using the ST, align the Top mark on crank sprocket to nine o clock position as shown in the figure
2008 Tribeca (3.6L) MECHANICAL(H6DO) > Timing Chain Assembly Report a problem with this article INSTALLATION Be careful that the foreign matter is not into or onto assembled component during installation.
More informationAluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve X Series The X series has been remodeled. Please select the new type. RoHS High fluorine resistance inimal outgassing inimal contamination from heavy metals ø00, ø60 X(V)
More informationPARTS MANUAL EH17. Model. 1193P220 Rev. 11/99
PARTS MANUAL Model EH17 Note: This manual covers the original EH17 specifications. In 1998 the second series of the EH17 (EH17-2) was introduced. There are significant differences between these versions
More informationASTRO ATS-9900 TABBER, LABELER, AND STAMP AFFIXER. Parts Manual
ASTRO ATS-9900 TABBER, LABELER, AND STAMP AFFIXER Parts Manual This manual is intended solely for the use and information of Astro Machine Corp. its designated agents, customers, and their employees. The
More informationAluminum High Vacuum Angle Valve
luminum High Vacuum ngle Valve Series X X High fluorine resistance inimal outgassing inimal contamination from heavy metals X Q X YV ø00, ø60 XF(V) ourtesy of Steven Engineering, Inc.-0 Ryan Way, South
More informationFieldbus System (Gateway Decentralized Type)
Fieldbus System (Gateway Decentralized Type) * * Except the SY, VQC and S0700 valves GW Unit which supports PROFINET added. New M connector type Input Unit added. Decentralized valve installation Valves
More informationP753-2 For Models: M753W2 and NL753W2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P753-2 For Models: M753W2 and NL753W2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are
More informationMedium bore size cylinder Double acting, non-rotating type. CMK2-M Series. Bore size: 20, 25, 32, 40
U SM Specifications Double acting, nonrotating type M Series Bore size:,,, JIS symbol Note: alue when stroke length is 0 mm (excluding deflection of piston rod). Double acting nonrotating cylinder single
More informationRotary Actuated Air Gripper
Rotary ctuated ir Gripper MHR, MDHR/MHR3, MDHR3 -finger type: Size, 15,, 3/ 3-finger type: Size, 15 High Precision - Repeatability ±.1 mm Parallel opening and closing mechanism utilizing a cross roller
More informationJ&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.
ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology,
More informationKD Fittings. Product range:
K Fittings Product range: ll-threads rackets rass Heads ams & olts ross owels Flush Mounts Inserts Insex Screws Maxi Luna Fittings Modeez Fasteners Panel onnectors Screws Stretcher Plates Tee Nuts Unita
More information15.Timing Chain Assembly
15. A: REMOVAL 1. TIMING CHAIN RH When replacing a single part, perform the work with the engine assembly installed to body. 1) Remove the chain cover. 2) Using
More informationEC 120T. Spare parts list. Hydraulic breakers. EC 120T s/n DEQ Construction Tools GmbH No
EC 120T Spare parts list Hydraulic breakers EC 120T s/n DEQ150544-2018 Construction Tools GmbH No. 3390767701 2018-01-01 General information This spare parts list applies to the following: Part number
More informationJV3-160S MECHANICAL DRAWING. Ver 1.10 MIMAKI ENGINEERING CO., LTD.
JV-0S MECHANICAL DRAWING Ver. MIMAKI ENGINEERING CO., LTD. TKB Gotenyama Building, -9-, Kitashinagawa, Shinagawa-ku, Tokyo -000, Japan Phone: +--0- Fax: +--0- URL: http: // www.mimaki. co. jp / E-mail:
More informationGAS SPRINGS ENHANCED SETTING HOLE TYPE. ISO/CNOMO STANDARD TYPE Catalog No. GST TRANSVERSAL TYPE HIGH ALLOWABLE ECCENTRICITY AND HIGH SPEED TYPE FFC
Product name GLOL STNDRD TYPE ENNCED SETTING OLE TYPE ISO/CNOMO STNDRD TYPE GSV GST GSK 869 871 Page 867 NEW NEW GSV GSK GST PLTES TRNSVERSL TYPE TRNSVERSL TYPE IG LLOWLE ECCENTRICITY ND IG SPEED TYPE
More informationPARTS MANUAL P For Models: M843NW3 and NL843NW3.
PARTS MANUAL P843-3 For Models: M843NW3 and NL843NW3 www.northern-lights.com CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to
More informationHigh performance metal disk coupling SERVOFLEX SFF (N)
High performance metal disk coupling SERVOFLEX SFF (N) Best design for the latest servo motor SERVOFLEX for feed shaft which introduce the high precision clamp method Coupling outer diameter, lineup for
More informationHydraulic Angle Grinder for Underwater Use Type
M a s c h i n e n f a b r i k G m b H Hydraulic Angle Grinder for Underwater Use Type 1 1585 0010 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 18.01.13 115850010_Inst_en_Version_03
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170
More informationTiming Chain: Service and Repair
2005 Nissan-Datsun Altima L4-2.5L (QR25DE) Copyright 2013, ALLDATA 10.52SS Page 1 Timing Chain: Service and Repair TIMING CHAIN Removal and Installation Apply new engine oil to parts marked in illustration
More informationPRO 2 SERIES PSSLPSE SEATED LEG PRESS. Customer Support Services PARTS MANUAL
PRO SERIES PSSLPSE SEATED LEG PRESS Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND BASE FRAME ASSEMBLY
More information230 kv Aluminum Bolted Terminal Connectors
230 kv luminum olted YPE FV- erminal ug ee connector designed to connect aluminum cables to aluminum pad for flat bolt on connection. Pads conform to NEM standards. luminum lloy Hardware Yellow anodized
More informationVibration Damper - Installation (0-118) Fan Hub - Installation (0-119)
Vibration Damper - Installation (0-118) Section 0 - Engine Disassembly and Assembly - Group 00 Page 0-110 B Series Shop Manual 10 mm Install the package. Torque Value: 24 N m [18 ft-lb] Vibration Damper
More information771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
More information2004 Lexus LS430. Submodel: Engine Type: V8 Liters: 4.3 Fuel Delivery: FI Fuel: GAS
2004 Lexus LS430 Submodel: Engine Type: V8 Liters: 4.3 Fuel Delivery: FI Fuel: GAS OVERHAUL If the airbag connector is disconnected with the ignition switch in the ON position, DTCs will be recorded. When
More informationVM / VML COMPONENT PARTS CATALOGUE
VM / VML REFRIGERATION COMPRESSOR COMPONENT PARTS CATALOGUE Ver. 2002 HASEGAWA CONTENTS Model VM / VML Compressor Description Parts # Crankcase Component Parts External Casing Fittings Covers & Gaskets
More informationASTRO ATS-309 TABBER/STAMP AFFIXER
ASTRO ATS-309 TABBER/STAMP AFFIXER PARTS CATALOG This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information
More informationMASTER CYLINDER INSPECTION
7-16 CHASSIS A-PDF Split DEMO : Purchase from www.a-pdf.com to remove the watermark Remove the piston assembly. MASTER CYLINDER INSPECTION MASTER CYLINDER Inspect the master cylinder bore for any scratches
More informationPARTS MANUAL EH25. Model. 1193P222 Rev. 11/99
PARTS MANUAL Model EH25 Note: This manual covers the original EH25 specifications. In 1998 the second series of the EH25 (EH25-2) was introduced. There are significant differences between these versions
More informationPIECES DE RECHANGES ERSATZTEILE SPARE PARTS PIEZAS DE RECAMBIO
PIECES DE RECHANGES ERSATZTEILE SPARE PARTS PIEZAS DE RECAMBIO May 1997 Printed in Switzerland 395 901 22 INDEX Accessory box, extension table, Needle plate, bottom cover 1 Upper cover, face plate 2 Front
More informationSeries NCM. Air Cylinder. Stainless Steel Body Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" Bore
CT.ID2-2 ir Cylinder Series CM Stainless Steel ody Cylinders 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", 2" ore ow available in 7/16" and 9/16" bore Double Rod/Double End Mounting on-rotating Rod
More informationSAMSON special tools. Fig. 1 Seat wrenches and supporting flanges WA 029 EN
SAMSON special tools Fig. 1 Seat wrenches and supporting flanges WA 029 EN Edition November 2000 General information 1. General information Special seat tools are required to install or remove the seats
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationFMotor Circuit Controllers
KTA7/KTB7 & KTC7 Bus Bar and Supply Blocks are in millimeters (inches). not intended for manufacturing purposes. KT7-32-A3E KT7-45-A3E KT7-32-DB KT7-45-DB KT7 ➌ ➍ Compact Busbar Feeder Terminal IEC Compact
More informationCompact direct acting precision regulator
direct acting precision Components preparation and pressure adjustment / unit CONTENTS Product introduction 6 Safety precautions 62 Discrete (RJB500) 624 Block manifold (MNRJB500) 626 Block configurations
More information