Power pack type UHKZ
|
|
- Gregory Small
- 6 years ago
- Views:
Transcription
1 Power pack type UHKZ 3 p max = 20 MPa Q max= 9,8 cm /rev WK APPLICATION Power packs type UHKZ are designed to drive and control hydraulic receivers (cylinders and hydraulic motors). They are used in moveable machines as a drive for small presses, lifts and shop machines. The power pack is intended to operate for short periods of time. DESCRIPTION OF OPERATION Standard version of power pack is composed of the oil tank with essential accessories like: oil suction filter oil filler oil drain plug pump assembly (electric motor gear pump), pressure gauge and the block with output connections. Standard version of the power pack can be extended upon customer s request with the following systems: hydraulic control system according to the individual scheme other apparatus and hydraulic machines which are not included in data sheet, prior agreed with the manufacturer electric control system. TECHNICAL DATA Basic inform ormat ation Hydraulic fluid mineral oil Operating temperature range - up to +70 C Stand ndard fluid f filtr f ltrat ation 90 µm Fluid viscosity range up to 380 mm 2/s Supp upply volt ltage for f motor m or 3 x 400V 50 Hz (other, if agreed) Supp upply volt ltage for f directd irectional l contro c trol valve ve 24V DC (other, if agreed) Tank type B Material for a tank steel Nominal capacity of a tank 2,5 dm 3 5 dm 3 dm 3 dm 3 plastic 3 dm 3 5 dm 3 Type UHKZ - 1 -
2 TECHNICAL DATA Operating pressure range depending on motor power and type of pump. Motor or type Type of flangef Power [ kw ] Type of pump p Disp splaceme acement Pressure [ cm 3/revolution] [ MPa] Assembly designat ation 71-4B FT A FT0 80-4B FT0 90S-4 FT115 90L-4 FT115 0,37 0,55 0,75 1,1 1,5 G 0,85 G 1,3 G 1,6 G 1,15 G 1,3 G 1,6 G 2,1 G 1,3 G 1,6 G 2,1 G 2,6 G 3,2 G 3,7 G 2,1 G 2,6 G 3,2 G 3,7 G 4,2 G 4,9 G 6,0 G 2,6 G 3,7 G 4,2 G 4,9 G 6,0 G 7,9 0,85 1,3 1,6 1,15 1,3 1,6 2,1 1,3 1,6 2,1 2,6 3,2 3,7 2,1 2,6 3,2 3,7 4,2 4,9 6,0 2,6 3,7 4,2 4,9 6,0 7, L-4A FT 2,2 G 4,2 G 4,9 G 6,0 G 7,9 4,2 4,9 6,0 7, G 9,8 9, L-4B FT 3,0 G 6,0 G 7,9 G 9,8 6,0 7,9 9, L-4PC FT 4,0 G 7,9 G 9,8 7,9 9, Type UHKZ
3 OVERALL AND CONNECTION DIMENSIONS Fitt tting on the tanks: t,, B, 1 1 outputs A, B H O C K 49 x R O D O 8,5-4 holes A 4 B Motor or Tank A B C D H K Skg7 g71-4b Kg80-4A Kg80-4B Kg90S- S-4 Kg90L 0L-4 Kg0L 0L-4A Kg0L 0L-4A Kg0L 0L-4PC 188 B 213 B 271 B 328 B 363 B Type UHKZ - 3 -
4 OVERALL AND CONNECTION DIMENSIONS Fitt tting on the tanks: t, outputs A, B O C O 8,5-4 holes 4 A 4 B H 69 K 49 x R 170 Motor or Tank A B C H K Skg7 g71-4b 80-4A 80-4B 90S-4 90L-4 0L-4A 0L-4A Kg0L 0L-4PC Type UHKZ
5 SCHEMES Hydraulic scheme for f power p pac p ack A B A B A B 3 max 6 pcs of directional control valves size 6 can be mounted P T 1 M 2 Hydraulic schemes (opt options) for directd irectional l controc trol valve ve - pos. p 1 option normally-open - designation...no... option normally-closed - designation...nc Directional control valve - options*: norm ormally ly-ope open - designation UHKZ...- NO -... normally-closed - designation UHKZ...- NC Throttle valve - options*: wit ith thr hrott ttle valve ve - designation UHKZ...- D -... without throttle valve - no designation 3 - Directional control valve size 6 to be mounted - connections A, B: G 3/8 Note: (*) - Options showed on the scheme are in bold Type UHKZ - 5 -
6 HOW TO ORDER UHKZ Tank size steel = 2,5 steel = 5 steel B = steel = plastic = plastic = Type of pump G 0,85 = 0,85 G 3,7 = 3,7 G 1,15 = 1,15 G 4,2 = 4,2 G 1,3 = 1,3 G 4,9 = 4,9 G 1,6 = 1,6 G 6,0 = 6,0 G 2,1 = 2,1 G 7,9 = 7,9 G 2,6 = 2,6 G 9,8 = 9,8 G 3,2 = 3,2 Motor power 0,37 kw = 0,37 0,55 kw = 0,55 0,75 kw = 0,75 1, kw = 1,1 1,50 kw = 1,5 2,20 kw = 2,2 3,00 kw = 3,0 4,00 kw = 4,0 Nominal size for hydraulic elements installed (applied to elements connections nominal size 6 to be mounted pos. 3 according to the scheme on page 5) NS6 = 6 Designed version of power pack without connection for directional control valve (standard version) with connection for one directional control valve with connection for two directional control valves (parallel connection) = R2 with connection for three directional control valves (parallel connection) = R3 with connection for four directional control valves (parallel connection) = R4 with connection for five directional control valves (parallel connection) = R5 with connection for six directional control valves (parallel connection) = R6 Version of directional control valve (applied to directional control valve pos. 1 according to the scheme on page 5) normally-open = NO normally-closed = NC = no designation = R1-6 - Type UHKZ
7 * Further requirements in clear text (to be agreed with the manufacturer) Succesive version of power pack (given by the manufacturer when order confirmed) Throttle valve (applied to throttle valve pos. 2 according to the scheme on page 5) without throttle valve with throttle valve = XXXX = no designation = D NOTES: Power pack should be ordered according to the above coding. The type, quantity and placing hydraulic elements (directional control valves, valves and other) must be specified on hydraulic scheme or in other clear way. Coding example: UHKZ--4,2-1,5-6-R4-NO-D-XXXX Type UHKZ - 7 -
8 PONAR Silesia S.A. ul. Wojska Polskiego Wadowice tel fax Type UHKZ
Power pack type UHPT
Power pack type UHPT p = 32 MPa max Q = 25 max dm 3/min WK 560 658 04.2008 PPLICTION Power pack is intended to supply hydraulic system with hydraulic fluid (oil) according to the required parameters (pressure
More informationPower pack type UHMZ 63
Power pack type UHMZ 63 p max = 20 MPa Q = 10 3 cm /rev max WK 560 505 04.2008 PPLICTION Power pack is intended to supply hydraulic system with hydraulic fluid (oil) according to the required parameters
More informationDirectional spool valve type WH16 hydraulically operated
Directional valve type WH16 hydraulically operated NS16 up to 5 MPa up to 240 dm /min WK 499 501 04.2009 PPLICION Directional valves type WH16 are intended for change in direction of fluid flow in a hydraulic
More informationPower pack type UHJV 250
Power pack type UHJV 250 p = 16 MPa max Q = 67 max 3 dm /min WK 560 501 04.2008 PPLICTION Power pack is intended to supply hydraulic system with hydraulic fluid (oil) according to the required parameters
More informationPower pack type UHJV 63
Power pack type UHJV 63 p max = 10 MPa Q =13 max dm 3/min WK 560 498 04.2008 PPLICTION Power pack is intended to supply hydraulic system with hydraulic fluid (oil) according to the required parameters
More information2/2 - way cartridge valve type URZS/S
/ - way cartridge valve type URZS/S NS, 0, 50 up to MPa up to 00 dm /min DT SHEET - SERVICE MNU NUL WK 1 0 07.01 PPLICTIN / way cartridge valve type URZS S can be used in hydraulic systems as a pilot operated
More informationPower pack type UHMZ 25
ower pack type UHMZ 25 p max = 20 Ma Q = 10 max cm 3/rev WK 560 503 04.2008 LICION ower pack is intended to supply hydraulic system with hydraulic fluid (oil) according to the required parameters (pressure
More informationWK Proportional pressure reducing valve, cartridge design type WZRS6. NS 6 up to 5 MPa up to 40. dm /min APPLICATION DESCRIPTION OF OPERATION
Proportional pressure reducing valve, cartridge design type WZRS6 NS 6 up to 5 MPa up to 40 dm /min WK 499 979 04.201 PPLICTIN Proportional pressure reducing valve, electrically operated type WZRS6 is
More informationDirectional cartridge valve type. tight on both sides type 2URED6
Directional cartridge valve tight on both sides type URED6 NS 6 up to 31,5 MPa up to 5 DATA SHEET - SERVICE MANUA NUAL 3 dm /min WK 493 130 07.011 APPLICATION Directional cartridge valve type URED6 is
More information2/2- way directional valve type URZS40 Cover of directional valve type ULZS40
2/2- way directional valve type URZS40 Cover of directional valve type ULZS40 NS40 up to 42 MPa up to 1600 DT SHEET - SERVICE MNU NUL dm /min WK 421 750 0.201 PPLICTIN 2-way, 2-position directional valve
More informationPressure relief valve, pilot operated, sandwich plate type UZPR10
ressure relief valve, pilot operated, sandwich plate type UZR0 NS0 up to,5 Ma up to 00 dm /min WK 497 00.0 LICION ressure relief valve, pilot operated, sandwich plate design type UZR0 0 is used to limit
More informationPilot operated pressure relief valve type DB 3
ilot operated pressure relief valve type DB NS, 0, 0 up to 5 Ma up to 650 dm /min DAA SHEE - SERVICE MANUA NUAL WK 0 07.011 ALICAION ressure relief valves type DB... serve to limit pressure in a hydraulic
More informationDESCRIPTION OF OPERATION
Valve cover with a function of controlling closed position of the valve poppet type ULZS ED NS6, 5 up to 0 MPa up to 00 dm /min DT SHEET - OPER RTION MNU NUL WK 6 60 0.07 PPLICTION The valve cover with
More informationDouble throttle/check valve type Z2FS16
Double throttle/check valve type Z2FS16 NS16 up to 5 MPa up to 250 D SHEE - OPERION MNUL dm /min WK 42 690 06.2015 PPLICION hrottle/check valve type Z2FS16 16... is used for setting the size of the main
More information6-way section directional valves type 6URRE6 consist
way section directional valve type URRE NS up to 5 Ma up to 80 D SHEE SERVICE MNU NUL dm /min WK 0 00 0.0 LICION way section directional valves type URRE are used to change direction of fluid flow in hydraulic
More informationDirectional cartridge valve tight on both sides type 2URED6 3
APPLICATION Directional cartridge valve type URED6 is intended for control direction of fluid flow, causing particular movement direction or stops a receiver (cylinder or hydraulic motor). The directional
More information3-way flow control valve type UDUE10 is intended for
3-way flow control valve type UDUE10 NS10 up to 35 Ma up to 50 dm 3/min DT SHEET - OER RTION MNU NUL WK 422 620 06.2014 LICTION 3-way flow control valve type UDUE10 is intended for independent from pressure
More information6-way section directional valves type 6URRE6
way section directional valve type URRE NS up to 5 Ma 80 dm /min D SHEE SERVICE MNU NUL WK 40 00 0.009 LICION way section directional valves type URRE are used to change direction of fluid flow in hydraulic
More informationX 7 WK Electrically operated directional spool valve with a soft-shift function type WE6P NUAL NS6. up to 35 MPa up to 80 dm APPLICATION
Electrically operated directional spool valve with a soft-shift function type WE6 NS6 up to 35 Ma up to 80 dm 3/min D SHEE - OER RION MNU NUL WK 430 450 04.016 LICION Electrically operated directional
More informationDirectional spool valve type WMM 16 hand lever operated
Directional spool valve type WMM 16 hand lever operated Size 16 35 MPa 180 dm 3 /min WK 450 209 04.2001r. Directional spool valves are used to control the direction of fluid flow and thus the direction
More informationWK /2 WAY CARTRIDGE VALVE TYPE URZS 16 COVER FOR CARTRIDGE VALVE TYPE ULZS 16. size 16 up to 42 MPa 140 dm 3 /min DESCRIPTION OF OPERATION
2/2 WAY CARTRIDGE VALVE TYPE URZS 16 COVER FOR CARTRIDGE VALVE TYPE ULZS 16 size 16 up to 42 MPa 140 dm 3 /min WK 450 950 04.1999r. 2/2 way cartridge valve type URZS 16 can be used to build hydraulic systems
More informationDirectional control valves hydraulically operated type WHG6/WHP6
LICION Directional control valves hydraulically operated type WHG6/WH6 Directional control valves hydraulically operated type WHG6, WH6 are intended for change in direction of fluid flow in a hydraulic
More information2-WAY FLOW CONTROL VALVE TYPE UDRD6
-WY FLOW CONTROL VLVE TYPE UDRD6 WK 0 00 NS6 up to 31,5 MPa up to 3 dm 3 /min WK 0 00 -way flow control valve type UDRD6 serves to control fluid flow rate independently of pressure and temperature in direction
More informationDirect operated pressure relief valve type DBD
Direct operated pressure relief valve type DBD NS,, up to 3 Ma up to 50 DAA SHEE - OERAION MANUAL 3 dm /min WK 450.5 ALICAION A direct operated pressure relief valve type DBD is designed to limit maximum
More informationPILOT OPERATED PRESSURE REDUCING VALVE TYPE DR
PILOT OPERATED PRESSURE REDUCING VALVE TYPE DR Size, 20, 0 up to 1,5 MPa up to 00 dm /min. WK 495 690 04.1999r. Pilot operated pressure reducing valves type DR are used to reduce pressure in hydraulic
More informationmobile hydraulics PONAR Wadowice S.A. is: the largest Polish producer of oil hydraulics elements and systems a supplier of a complete range of oil hydraulics the owner of a modern machinery park a trusted
More informationTHE PRODUCTION LINE OF PONAR WADOWICE
PONAR Wadowice S.A. ul. Wojska Polskiego 29 34-100 Wadowice Tel.: +48 33 488 21 00 Fax: +48 33 488 21 03 E-mail: ponar@ponar-wadowice.pl Web: www.ponar-wadowice.pl THE PRODUCTION LINE OF PONAR WADOWICE
More informationDouble throttle/check valve type Z2FS10
Duble thrttle/check valve type Z2FS0 NS0 up t,5 Ma up t dm /min WK 450 2 02.200 LICION hrttle/check valve type Z2FS0 0... is used t cntrl main flw rate (r pilt flw rate) in ne directin f flw and t allw
More informationPILOT OPERATED PRESSURE RELIEF VALVE TYPE DB/DBW
PILOT OPERATED PRESSURE RELIEF VALVE TYPE DB/DBW Size 10, 20, 30 31,5 MPa up to 600 dm 3 /min. WK 460 860 04.1999r. Pressure relief valves type DB... serve to limit pressure in a hydraulic system or in
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More informationGreasing machines MPD 60-1, MPD 60-2
Greasing machines MPD 60-1, MPD 60-2 I. Usage The MPD models of LubTechnik greasing machines are used as a cost effective and reliable source of pressure lubricant for central lubrication of big machinery
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationOff-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationHYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE
HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE HYPSO RN 113 BP 10 82700 MONTECH Tél. : 05 63 64 70 71 Fax : 05 63 64 76 56 Web : http://www.hypso.fr Mail : contact@hypso.fr COMPACT
More informationRSP 7-06 R S P FUNCTIONAL DESCRIPTION ORDERING CODE. DIRECTIONAL CONTROL VALVES KE /13 D n 06 p max 32 MPa Q max 80 dm 3 /min
DIRECTIONAL CONTROL VALVES KE 2053 07/13 D n 06 p max 32 MPa Q max 80 dm 3 /min Manually operated directional control valves of type RSP7 06 operated by hand lever are used to control start, stop and direction
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationM7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company
Precision Machinery Company Swash Plate Type xial Piston Motor M7X / M7V Series QULITY HYDRULICS LTD WHINBNK PRK WHINBNK ROD YCLIFFE INDUSTRIL PRK NEWTON YCLIFFE CO. DURHM DL5 6Y TEL. 01325 317755 FX.
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationHydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
More informationDouble throttle/check valve type Z2FS6
Duble thrttle/check valve type ZF N up t,5 Ma up t 0 dm /min WK 4 00 0.0 LICION hrttle/check valve type ZF... is used t cntrl main flw rate (r pilt flw rate) in ne directin f flw and t allw free flw in
More informationFMP IN-LINE FILTER SERIES. Maximum working pressure 250 bar. Flow rate to 500 l/min
INLIN FILTR Maximum working pressure 0 bar Flow rate to 00 l/min R.F. Filter Symbol without bypass Filter Symbol with Reverse Flow R.F. Filter Symbol with bypass Filter Symbol with bypass & Reverse Flow
More informationIEC Contactors. IEC Contactors. YS Series. YS Series Contactors YS1N- F11 ****
YS Series Contactors Key features of the YS Series include: Compact size AC and C coil, reversing and non-reversing Weld-resistant silver alloy contacts No cadium used in contacts Highly reliable auxiliary
More informationPZH Series High-Pressure Variable Volume Piston Pump
PZH Series High-Pressure Variable Volume Piston Pump eatures qlong, trouble-free service life Swash plate design ensures long, trouble-free bearing life. wlow-noise, even in the high pressure range High-rigidity
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More informationSolenoid Pilot Operated Directional Control Valve
Solenoid Pilot Operated Directional Control Valve Features The highly reliale KSO-2 adopted as the pilot valve ensures long service life and stale operation. 1 Nomenclature - JS - - - - 1 2 3 4 5 7 8 9
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationNDJ Series New DAIPACK
DJ Series ew DIPK omenclature DJ - - 0-4 6 7 Model o. DJ: ew DIPK Pump capacity 8: V 8 used ( 8 cm /rev) : V used (4.8 cm /rev) Pressure adjustment range 9: 0.8 to. MPa {8 to kgf/cm } : 0.8 to 7 MPa {8
More informationNDR Series Rotor Pack
efore using the product, please check the DR Series Rotor ack Features Low noise chieves a noise level of no greater than 0 d () and there is no need to worry about hydraulic noise even at factories in
More informationOil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
More informationInternet For latest information, PDF catalogs and operation manuals
DJ Series ew DIPK omenclature Features DJ - - 0-4 6 7 Low noise The tank contains the pump and motor inside and functions itself as noise insulation panels to trap noise internally. Low oil temperature
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationClamping and drive module
Clamping and drive module RE 51147/10.05 Replaces: 04.02 1/14 Type UPE 3 Drive power 3.0 kw / 4.0 kw Series 1X Maximum operating pressure 700 bar H6842 Overview of contents Contents Page Features 1 Application
More informationFeed Pumps FZP / MFZP
eed Pumps ZP / MZP Symbol General The feed pump from the ZP series is a vane pump for the low-pressure range with constant flow rate. Product eatures l irect drive pump no bell housing or coupling required
More informationAxial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationRE / /09.97
RE 5 05/0.98 05/09.97 Hydraulic Motor (Radial Piston, Multi-Stroke) Type MCR 0, Series X RE 5 05/0.98 Size0 to 400 up to 4 bar up to 400 cm up to 07 Nm Replaces: 09.97 Compact, sturdy construction Smooth
More informationRotary limit switches FCR FGR series
Rotary limit switches FCR FGR series Rotary control switches with 00mm rods from up to positions. Control switches with rotary gear from up to 00 rpm with or micro switches. 0 Rotary limit switches FCR
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationOil/Air Cooler Units. Mobile application and Hydraulic motor OK ELH Type. Test procedure certified following EN 1048
MOBILE OIL / AIR COOLERS NEW COMPACT DESIGN WITH HYDRAULIC MOTOR AND HIGH COOLING PERFORMANCE Application These coolers are designed specifically for mobile hydraulic applications where high performance
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationLMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
More informationHydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationAxial Piston Variable Double Pump A8VO
Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code
More informationFeed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
More informationType KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
More informationPRESS G SERIES. Two Stage Light Oil Burners FIRING RATES
The PRESS G series of burners covers a firing range from 107 to 1660 kw and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups
More informationUŽSISAKYK internetu - el. paštu - telefonu
HYDRAULIC UŽSISAKYK internetu - www.dominga.lt/eshop el. paštu - info@dominga.lt telefonu - +70 52 2221 APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More informationDischarge rate* 2 L/min MPa (DE10-1) 37.8 MPa (DE10-7)
D VANE PUMPS D VANE PUMPS Operating pressure MPa {kgf/cm } Maximum Rated Discharge rate* L/min Permissible min Page DS DSP 7 {7} 7 {7} to D- MD Motor pumps incorporating a DSP D-4 DP DP DP DP 7. {7} 4
More informationQ max 300 l/min. Fluid temperature range C Fluid viscosity range cst Recommended viscosity cst 25
41 420/103 ED DSP7 PILOT OPERATED DISTRIBUTOR SOLENOID OR HYDRAULIC(DSC7) CONTROLLED SERIES 10 CETOP 07 p max (see performance ratings table) Q max 300 l/min MOUNTING INTERFACE CETOP 4.2-4-07-320 The DSP7
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationPressure sequence valve pilot operated
/6 Pressure sequence valve pilot operated.4 Type DZ...L Sizes to Up to bar Up to 6 L/min Contents Function and configuration Symbols Specifications Technical data 4 Characteristic curves 4 Unit dimensions
More informationBULUPOL-4 DOUBLE DISC GRINDER / POLISHER WITH AUTO HEAD
BULUPOL-4 DOUBLE DISC GRINDER / POLISHER WITH AUTO HEAD OPERATIONAL MANUAL BMS Bulut Makina Sanayi ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No: 7-9, Başakşehir
More informationClamping and drive module
Clamping and drive module RE 51142/10.05 Replaces: 11.02 1/8 Type UPE 2 Drive power 1.1 kw / 2.2 kw Series 1X Maximum operating pressure 700 bar UPE2_1X Table of contents Contents Page Features 1 Possible
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationMax. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (
These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse
More informationOil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationGrease-lubricating pump FF... DSK US (05.05)
Grease-lubricating pump FF... DSK 2-008-00-US (05.05) electrically operated, for small and medium-sized multiple-line and progressive systems PSG-2 with cycle switch VPB with cycle switch PSG-2 with cycle
More informationGenuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52
Genuine Metaris MA10VO/VSO Technical Catalog www.metaris.com Contents General Series MA10VO/VSO Series 31 4 Page Features 4 Technical Data 5 Performance Information 6 Model Code Breakdown 9 Fluid Info
More informationSeries Variable Displacement Piston Pump
AH Series Variable Displacement Piston Pump AH AH7 AH AH45 KS Geometric Displacement Max. Operating Series Graphic cm 3 /rev Pres. Page Symbol 3 4 5 6 7 8 9 3 4 5 MPa {kgf/cm 2 } AH-F-R--K-S- AH AH45-F-R--K-S-
More informationGear Pump Model G4, Series 2X
s 40 to 100 Gear ump Model G4, Series 2X 3000 SI (210 bar) 6.1 in 3 (100 cm 3 ) 10 042/03.95 10 042/03.95 eplaces: 01.91 SE connection flanges Sleeve bearings for long life Single block bearings ISO or
More informationAxial Piston Variable Pump A10VSO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RE 92714/06.11 1/44 Replaces: 07.10 and RE 92707 Data sheet eries 32 ize
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationOperating instructions FPCC FPFG FPCG FPFX FPAC
Vane pumps Operating instructions FPCC 65 -... FPFG 65 -... Index Page Proper use 2 Type code 2 Technical data 3 Installation 3 Start-up 10 Maintenance 13 Trouble shooting 13 ALFONS HAAR MASCHINENBAU GMBH
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationService Bulletin RT Supersedes Bulletin RTA Running-in of Cylinder Liners and Piston Rings
Service Bulletin RT-18.4 09.06.2009 Supersedes Bulletin RTA-18.3 Technical Information to all Owners / Operators of Wärtsilä RTA and RT-flex engines Running-in of Cylinder Liners and Piston Rings Contents
More informationConditioning Module Reservoir Extraction CM-RE
Conditioning Module Reservoir Extraction CM-RE Description The ConditioningModule Reservoir Extraction CM-RE is designed as an accessory to the CS ContaminationSensors and the FCU FluidControl Units. The
More informationTriboTec LUBRICATION PUMP VEG
LUBRICATION PUMP APPLICATION The lubricator is used as a source of pressure-lubricant for multi-line central lubrication systems. Due to the choice of the number of outlets in combination with progressive
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationIPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationGear Motors. Series PGM Fixed Displacement Motors, Aluminium Designs
Gear Motors Series PGM Fixed Displacement Motors, Aluminium Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationMINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP
MINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP CMI Summary table Essential characteristic of the control unit compact CMI is the arrangement of the motor pump unit completely immersed in the oil inside
More informationMULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
More informationFlow rates to 500 l/min
FF 5 Filter housing in according to SE J066 for F filter elements Maximum pressure 50 bar Flow rates to 500 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing:
More informationAutomatic filter AF 153 G
Automatic filter AF 153 G with scraper and external pressure cleaning Connection sizes: DN 50/G2, cast stainless steel 1 Features MAHLE automatic backflush filters are suitable for all applications where
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More information