Max. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (

Size: px
Start display at page:

Download "Max. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) ("

Transcription

1 These valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycles machine tools. Switching from rapid traverse to feed is made by a cam operation, and fine feed control is accomplished by dial rotation regardless of pressure and oil temperature variation. Rapid return is free of cam actuation. Specifications UCFG UCFG UCFG---C- - UCFG UCFG UCFG--8-C- - UCFG--- - UCFG UCFG--- - UCFG UCFG--- UCFG--- Max. Flow L/min (U.S.GPM) 6 [] (. [.]) [8] (. [.]) 8 [] (. [.6]) [] (5. [.]) 6 [8] (. [.]) [] (. [.6]) [] (.6 [.6]) [] (.6 [.6]) 8 [] (. [.6]) Range L/min (U.S.GPM).- (.8-.6) {.5-} ({.-.6}).-8 (.8-.) {.5-8} ({.-.}).5- (.-.6).5-8 (.-.).- (.6-.6).-8 (.6-.).- (.6-5.8).- (.6-5.8) Fine.5- (.-.6).5- (.-.6).-7 (.6-.5) Max. Reversed Free Flow L/min (U.S.GPM) (5.) (.6) (.6) 8 (.) Max. Operating Pressure MPa (PSI) () pprox. Mass kg (lbs.).6 (.5).6 (5.7).7 (6.) (.) 9. (.). The maximum flow rates are values with the deceleration valve and the flow control valve fully open. The values in [ ] are maximum flow rates with the deceleration valve fully open and the flow control valve fully closed.. The values in { } are for pressures above 7 MPa ( PSI). Model Number Designation F- UCF Special Seals F-: Special Seals for Phosphate Ester Type Fluids (Omit if not required) Series Number UCF: Single Control UCF: Double Control G E - Type of Mounting G: Gasket Mounting G: Gasket Mounting Valve Size Nominal Metred Flow L/min (U.S.GPM) : (.6) 8: 8 (.) : (.6) 8: 8 (.) : (7.9) : (.6) 8: 8 (.) : (7.9) Deceleration Valve Max. Flow L/min (U.S.GPM) : (.) : 8 (.) C: (.6) Design Standards: None Japanese Standard "JIS" and European Design Standard N. merican Design Standard Connection None: Internal E: External None: External None: Internal E:External None: External Design Number Design Standards Refer to

2 FLOW CONTROLS Graphic Symbols UCFG-- UCFG-- -E UCFG-- UCFG-- -E UCFG- UCFG-- UCFG-- -E UCFG- ttachment Mounting olts Valve UCFG- UCFG- UCFG- UCFG- UCFG- Socket Head Cap Screw Japanese Std. "JIS" & European Design Std. M6 55 Lg. M6 55 Lg. M6 55 Lg. M 7 Lg. M 7 Lg. Instructions llowable pressures at controlled flow outlet If internal drain types of UCFG- or or UCFG- are used, use them in metre-out circuits in order to limit the valve outlet pressure to the valves shown below. In addition, external drain types can also be used in metrein circuits. Internal Type External Type UCFG-- UCFG-- UCFG-- UCFG-- -E UCFG-- -E UCFG- UCFG-- -E UCFG- llowable Outlet Port ack Pres. MPa (PSI). () () N. merican Design Std. /- UNC -/ Lg. /- UNC -/ Lg. /- UNC -/ Lg. /8-6 UNC -/ Lg. /8-6 UNC -/ Lg. UCFG- UCFG- UCFG- UCFG- UCFG- Qty. Required Force for Spool Push Down Type Internal drain type Internal drain type Internal drain type Force N (lbs.) (.5) 8 (8.) 7 (.) 9 (.) 7 (.) (9.) 7 (.) 7 (.) Note: The push down forces are with the maximum allowable pressure at the port concerned, which is controlled flow outlet "" for internal drain types or the drain port for internal drain types. Line filter To carry out flow adjustments by as small degree as L/min (.5 U. S. GPM) or less, be sure to use a line filter, µm or less, near the valve inlet. D Minimum required pressure difference The minimum pressure differential between inlet and outlet port is required to obtain the optimum pressure compensation. It varies accordingly to the flow rate to be set. For details, refer to the performance curve. Spool push down level Limit the spool push down level within the allowable maximum stroke range shown in the installation drawings. llowable drain port back pressure Limit to. MPa (5 PSI). In addition, connect the drain pipe independently and directly to the tank. (This applies only to external drain types.) Flow adjustment [UCFG-, UCF G-] Loosen the locking screw and turn the flow adjustment dial clockwise for increase, and anti-clockwise for decrease. The dial makes about four revolutions from zero to full flow and the valve opening is indicated on the revolution indicator. fter flow adjustment, tighten the locking screw. [UCF G-] Loosen the locking screw and turn the flow adjustment handle clockwise to increase, and anti-clockwise to decrease. Open condition is indicated in digital-scale in built-in revolution indicator. fter flow adjustment, tighten the locking screw. 9

3 Min. Required Pressure Difference PSI 8 6 MPa UCFG L/min PSI 8 6 UCFG- MPa L/min U.S.GPM U.S.GPM PSI 8 6 MPa UCFG PSI MPa L/min UCFG UCFG L/min U.S.GPM U.S.GPM UCFG--* - * - * -/9 DIMENSIONS IN MILLIMETRES (INCHES) 5.5 to (. to.5) Seal Stroke.5(.6) Throttle Stroke (.6) 7 (.8) 7 (.67) (.) Dia. Roller angle to 8 (.) Reversed Free Flow Outlet Port 5(.59).5(.) Hex. Soc. 6.(.65) Tightening Torque:.5 -. Nm (.6) (. -.7 IN. lbs.) Revolution Indicator Max. "" Dia. Mounting surface should have a good machined finish. 6 (.8) 9 (.9).5 (.67) (.8) 7 (.6) 7(.8) Dia. Through (.) Dia. Spotface Places Controlled Flow Outlet or Reversed Free Flow Inlet Port 7 (.8) (.7).5 (.8) (.) 5(.97) 66(.6) 8(.5).5 (.5) (.8) 8(.) Flow djustment Dial.5(.89) Dia (.7) 5(.77) 5(.9) Fully Extended 8(.) (.6) Locating Pin. (.6) Dia. (s Furnished) Only (UCFG-- - -E) have a machined finish. "".5 (.5).5 (.)

4 FLOW CONTROLS UCFG--* - * -/9 6. to 7. (. to.7) Seal Stroke.5 (.6) Throttle Stroke.5(.8) Reversed Free Outlet Port 68(.68) (.6) 9(.9) 55(.7).5 (.6).5(.5) 7(.8) Dia. Through (.) Dia. Spotface Places Controlled Flow Outlet or Reversed Free Flow Inlet Port (.6) 9 (.) 5.5(.) 69(.7) 8(.) (.9) 7(.6) (.) Dia. Roller angle to 8(.) (.) 89.5(.5).5(.) Hex. Soc. Tightening Torque: 8(.7).5 -. Nm (. -.7 IN. lbs.) 6.(.65) (.6).5(.89) Dia. Flow djustment Dial (.6) Revolution Indicator (.7) 5(.77) 5(.) Fully Extended 8(.) Max. "" Dia. Locating Pin. (.6) Dia. (s Furnished) Only external drain type (UCFG-- -E) have a machined finish. Mounting surface should have a good machined finish. "".5 (.5) (.6) D UCFG--* - * -/9 DIMENSIONS IN MILLIMETRES (INCHES) Fine Stroke.8 (.7) Stroke. (.7) Throttle Stroke (.8) Reversed Free Flow Outlet Port Fine Flow djustment Dial 68(.68) 55(.7) (.6) 9(.9).5(.6) (.).5(.5) 7.5 to 9. (. to.5) (.) Dia. Roller Flow djustment Dial angle to Revolution Indicator 8.5 (.) 7.5 (.8) 9(.5).5(.) Hex. Soc. Tightening Torque:.5 -. Nm (. -.7 IN. lbs.).5 (.89) Dia. 8(.7) (.6) 6. (.65) (.6) Locating Pin. (.6) Dia. Max. "" Dia. Mounting surface should have a good machined finish. "".5 (.5) (.6) Controlled Flow Outlet or Reversed Free Flow Inlet Port (.6) (.5) 9(.) 5.5(.) 7(.8) 8(.) (.9) 7(.6) 7(.8) Dia. Through (.) Dia. Spotface Places 5(.77) 6(.8) 5(.) Fully Extended 8(.) (s Furnished) Only external drain type (UCFG-- -E) have a machined finish.

5 UCFG---/9 8 to 9 (. to.5) Seal Stroke (.8) Throttle Stroke 6(.) Reversed Free Flow Outlet Port 96(.78) 76(.99) (.9) 67(.6) 55(.7) (.79) Controlled Flow Outlet or Reversed Free Flow Inlet Port (.9) (.79) (.57) 6 (.6) 9 (.5) (5.5) 6 (6.) 8(.7) Dia. Roller angle to Revolution Indicator (.69) 6 (.8) (.) Dia. Through 7.5(.69) Dia. Spotface Places (.7) (5.) Flow djustment Handle 6(.8) Dia. (.8) Hex. Soc. 8(.) 6.5(.96) (.) 6 (.) 5 (.) 55 (.7) 69 (.7) (.8) Two Locating Pins 6(.) Dia. (s Furnished) Mounting surface should have a good machined finish. Max. "" Dia. "" 5.5 (.6) 8.5 (.) UCFG---/9 DIMENSIONS IN MILLIMETRES (INCHES) to (.5 to.55) Fine Stroke (.6) Reversed Free Flow Outlet Port (.) (.9) 9(.5) 8(.) Stroke (.6) Throttle Stroke 5(.) 57.5(.6) (.87) (.79) 8(.7) Dia. Roller angle to Revolution Indicator 5 (.97) 5 (.5) 6 (.6) 5 (5.9) (.8) Hex. Soc..5 (.96) 6 (.).5(.) 6 (.) Two Locating Pins 6(.) Dia. Controlled Flow Outlet or Reversed Free Flow Inlet Port Fine Flow djustment Handle 6(.8) Dia. (.9) (.79) 7 (.85) 65 (.56) 8 (.) 85 (.5) (.8) 7 (6.69) 9 (7.8) (.) Dia. Through 7.5(.69) Dia. Spotface Places Flow djustment Handle 6(.8) Dia. 5 (.) 55 (.7) 69 (.7) (.8) (s Furnished) Max. "" Dia. "" 8 (.7) Mounting surface should have a good machined finish. 5.5 (.6) 8.5 (.)

6 FLOW CONTROLS UCFG--* - * - * -/ D Item of Parts Part Numbers Qty. Remarks SO-N-P SO-N-P7 SO-N-P SO-N-P SO-N-P SO-N-P SO-N-P6 SO-N-P5 Included in Seal Kit Kit No: KS-UCFG-- Section - Used only for external drain types (UCFG-- - -E- ). UCFG--* - * -/ Section Section - Item of Parts Part Numbers Qty. Remarks SO-N-P SO-N-P SO-N-P SO-N-P SO-N-P SO-N-P6 SO-N-P8 SO-N-P6 Included in Seal Kit Kit No: KS-UCFG-- Used only for external drain types (UCFG-- -E- ).

7 UCFG--* - * -/ Item of Parts Part Numbers Qty ack Up Ring SO-N-P SO-N-P6 SO-N-P SO-N-P SO-N-P SO--P SO-N-P SO-N-P6 SO-N-P Section - List of Seal Kits Valve UCFG-- - UCFG-- -E- Section - Seal Kit Numbers KS-UCFG-- KS-UCFG--E-. Used only for external drain types (UCFG-- -E- ).. Used only for internal drain types (UCFG-- - ). Note: When ordering the seals, please specify the seal kit number from the table above. UCFG---/9 UCFG---/ Item of Parts Part Numbers ack Up Ring List of Seal Kits Valve UCFG- UCFG- SO-N-P SO--P SO-N-P SO-N-P SO-N-P SO-N-P SO-N-P8 SO-N-P SO-N-P8 SO-N-P SO-N-G5 SO-N-P Seal Kit Numbers KS-UCFG-- KS-UCFG-- UCFG Quantity UCFG Note: When ordering the seals, please specify the seal kit number from the table below Section - Section -

Max. Reversed Free Flow L/min

Max. Reversed Free Flow L/min These Valves are the combination of flow control valve, a deceleration valve and a check valve and used mainly for controlling rapid traverse and feed cycle in machine tools. Switching from rapid traverse

More information

Pilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves

Pilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves FLOW CONTROLS Flow control of these valves is continuously made by a hydraulically operated pilot piston mechanism which controls opening area of the orifice of the valve. With the use of these valves,

More information

FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.

FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type. FLOW CONTROLS Valve Type Graphic Symbols Maximum Operating Pressure MPa (PSI) Maximum Flow U.S.GPM 5 5 5 5 5 5 5 Page Flow Control Valves (5) 77 Flow Control and Check Valves (5) 77 Pilot Operated Flow

More information

Proportional Electro-Hydraulic Flow Control and Relief Valves

Proportional Electro-Hydraulic Flow Control and Relief Valves Ω Ω Proportional Electro-ydraulic Flow ontrol and Relief Valves This flow control and relief valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since

More information

Throttle Modules / Throttle and Check Modules

Throttle Modules / Throttle and Check Modules FLOW CONTROLS Used as pilot choke valves for solenoid controlled pilot operated directional valves and pilot operated directional valves. Graphic Symbols Valve Size 3 Standard Type P AB T TCG- P A B T

More information

Restrictors / One Way Restrictors

Restrictors / One Way Restrictors FLOW CONTROLS This valve is used to regulate an actuator speed in a circuit where line pressure is almost steady and small fluctuation of oil flow due to pressure changes is permitted. Integrated check

More information

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min. Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They

More information

Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.

Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance. Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.

More information

EMechanically Operated Directional Valves

EMechanically Operated Directional Valves E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow

More information

10 SERIES MODULAR VALVES. Pub. EC-1405

10 SERIES MODULAR VALVES. Pub. EC-1405 SERIES General Information Mounting Surface : ISO ----, CETOP-, NP-D Up to 5 MPa (363 PSI), 8 L /m in ( U.S.GPM) Pub. EC-5 The modular valves are functional elements with which a hydraulic system can be

More information

EManually Operated Directional Valves

EManually Operated Directional Valves DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -

More information

Flow Control Valves / Flow Control and Check Valves

Flow Control Valves / Flow Control and Check Valves LOW CONTROLS These valves are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (viscosity of the fluid).

More information

Direct Operated Type Directional and Flow Control Valves

Direct Operated Type Directional and Flow Control Valves Specifications igh Response Type Proportional Electro-ydraulic Directional and Flow Control Valves igh response, high precision and high reliability are achieved be a combination of a compact and powerful

More information

" " Series Variable Displacement Piston Pumps

  Series Variable Displacement Piston Pumps " " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller

More information

Pressure Reducing and Relieving Valves

Pressure Reducing and Relieving Valves reducing and relieving valves are composite pressure control valves having pressure reducing and counterbalancing functions developed for hydraulic balancing circuits. Specifications RBG-- * - * RBG-6-

More information

PRESSURE REDUCING AND RELIEVING VALVES

PRESSURE REDUCING AND RELIEVING VALVES REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 25 (363 ), 25 (33 U.S.GPM) reducing and relieving valves are composite pressure control

More information

"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type

A Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type A"A" Series PISTON PUMPS Single Pump, Compensator Graphic Symbol M O Specifications Model s A-FRB- A-FRC/H- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- -R-- - -K- A- R S- A9- R S- A- R S- Geometric Displacement

More information

EManually Operated Directional Valves

EManually Operated Directional Valves DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -

More information

"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01

AR SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01 "AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw

More information

03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S.

03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S. 3 SERIES General Information Mounting Surface : ISO 44-C--4-, CETO-, N-DO Up to Ma (363 SI), 7 L /min (8. U.S.GM) ub. EC-43 MODULR VLVES The modular valves are functional elements with which a hydraulic

More information

06 SERIES MODULAR VALVES. Pub. EC-1404

06 SERIES MODULAR VALVES. Pub. EC-1404 6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system

More information

"G" SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) "G" SERIES SHOCKLESS TYPE

G SERIES SHOCKLESS TYPE SOLENOID OPERATED DIRECTIONAL VALVES G-DSG-01/03 (1/8, 3/8) G SERIES SHOCKLESS TYPE "G" SRIS SHOCKLSS Y NOID ORD DIRCIL VLVS G-DSG-1/3 (1/, 3/) "G" SRIS SHOCKLSS Y NOID CROLLD ILO ORD DIRCIL VLVS G-DSHG-/ (1/, 3/) Mounting Up to 5 Ma (33 SI), 5 L /m in (.1 U.S.GM) ub. C-5 DIRCIL CROLS

More information

"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3

AR SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3 "AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.

More information

Proportional Electro-Hydraulic Pilot Relief Valves

Proportional Electro-Hydraulic Pilot Relief Valves Proportional Electro-Hydraulic This valve consists of a small DC solenoid and a direct-acting relief valve. It serves as a pilot valve for a low flow rate hydraulic system or a proportional electro-hydraulic

More information

Series Proportional Electro-Hydraulic Controls

Series Proportional Electro-Hydraulic Controls Proportional Electro-ydraulic Controls Types Graphic Symbols Max. Operating Pressure () Maximum Flow U.S.GPM. 3 3 3 L/min Page Pilot Relief Valves. (3) EDG 67 Relief Valves. (3) EBG 3 6 676 Relieving and

More information

EMulti Purpose Control Valves

EMulti Purpose Control Valves IRCTIONAL CONTROLS The Yuken Multi-Purpose Valves Comply with The Needs of Reducing Cost and Size of Your Machine YUKN's Multi Purpose Valve s are compound valves composed of the main valve having four

More information

High Pressure, High Flow Rate Modular Valves

High Pressure, High Flow Rate Modular Valves High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.

More information

Series Shockless Type Solenoid Controlled Pilot Operated Directional Valves

Series Shockless Type Solenoid Controlled Pilot Operated Directional Valves Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating

More information

UNLOADING RELIEF VALVES

UNLOADING RELIEF VALVES UNLOADING RELIEF VALVES BUG-6/1 (3/4, 1-1/4) Specifications / Model Number Designation Up to 21 (35 ), L /min (66 ) Pub. E- These valves are used to operate the pumps with minimum load in accumulator circuits

More information

Proportional Electro-Hydraulic Flow Control (and Check) Valves

Proportional Electro-Hydraulic Flow Control (and Check) Valves Ω Proportional Electro-ydraulic Flow Control (and Check) Valves Since the preselected flow rate continuously varies in proportion to the current input to the valve, the system flow rate can be remotecontrolled

More information

"PV11R" SERIES Fixed Displacement- Single PV11R10/PV11R20

PV11R SERIES Fixed Displacement- Single PV11R10/PV11R20 "PVR" SERIES Fixed Displacement- Single PVR/PVR Up to MPa ( ),. cm /rev (. CU.IN./rev) Pub. EC- These pumps are of completely unique design for extra high pressure applications. The excessive wear to the

More information

ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090

ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090 Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4

More information

VARIABLE DISPLACEMENT PISTON PUMPS

VARIABLE DISPLACEMENT PISTON PUMPS VRIBLE DISPLCEMENT Pump Type "R" Series Variable Displacement Piston Pumps Maximum Operating MPa (PSI) () Geometric Displacement cu. in./rev... cm /rev R R Catalogue No. Pub. EC- "" Series Variable Displacement

More information

PRESSURE REDUCING AND RELIEVING VALVES

PRESSURE REDUCING AND RELIEVING VALVES REDUING AND RELIEVING VALVES RBG-3 / 6 (3/8, 3/4) Mounting Specifications / Model Number Designation / Others Up to 5 (363 ), (33 U.S.GPM) reducing and relieving valves are composite pressure control valves

More information

" " Series Variable Displacement Piston Pumps

  Series Variable Displacement Piston Pumps " " Series Variable Displacement Piston Pumps Compensator Type Constant Power (Torque) Control Type Load Sensing Type Pump Type Graphic Symbol Geometric Displacement cu. in./rev...5 5 5 5 5 cm /rev Maximum

More information

Proportional Electro-Hydraulic Directional and Flow Control Valves

Proportional Electro-Hydraulic Directional and Flow Control Valves Proportional Electro-Hydraulic s These valves are double-deck directional and flow control valves employing as their pilot the electro-hydraulic proportional pressure reducing valves with two proportional

More information

DIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications

DIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.

More information

01 SERIES MODULAR VALVES. Pub. EC-1402

01 SERIES MODULAR VALVES. Pub. EC-1402 SERIES General Information Mounting Surface : ISO --3--, CEO-3, N-D Up to 3.5 Ma (57 SI), 35 L /m in (9.5 U.S.GM) ub. EC- MODULR VLVES he modular valves are functional elements with which a hydraulic system

More information

Proportional Electro-Hydraulic Relieving and Reducing Valves

Proportional Electro-Hydraulic Relieving and Reducing Valves These valves consist of a small size but high performance EH series electro-hydraulic proportional pilot relief valve and reducing valve with relief function. The valves control the system pressure proportionally

More information

Solenoid Controlled Relief Valves

Solenoid Controlled Relief Valves hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve

More information

Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Hydraulic circuit (Example) AB AB AB X Z P Features hese stacking type multiple control valves are equipped

More information

AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps

AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps Variable Displacement Piston Pumps AR Series Variable Displacement Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa Variable

More information

Max. Operating Pressure Kgf/cm 2

Max. Operating Pressure Kgf/cm 2 In-Line Check Valves DIRCTIONAL CONTROLS These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure specified is the pressure required to open the valve

More information

Poppet Type Directional Valves

Poppet Type Directional Valves IRCTIONAL CONTROLS Poppet Type irectional Valves Valve Type Graphic Symbols Max. Operating Pressure MPa (PSI) Maximum Flow U. S. GPM.5 5 5 5 5 5 L/min Page Poppet Type Solenoid Operated irectional Valves

More information

PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS

PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS H PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS -Hybrid Components...Page Proportional Electro-Hydraulic Control Valves...Page 7 Proportional Electro-Hydraulic Controls High-accuracy, simple, convenient realizes

More information

50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination

50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance

More information

High Pressure, High Flow Rate Modular Valves

High Pressure, High Flow Rate Modular Valves eatures Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly and easily. roblems such

More information

10 SERIES MODULAR VALVES

10 SERIES MODULAR VALVES General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system

More information

"A" Series Piston Pumps Variable Displacement-Single Pumps Electro-Hydraulic Proportional Pressure & Flow Control. Type

A Series Piston Pumps Variable Displacement-Single Pumps Electro-Hydraulic Proportional Pressure & Flow Control. Type Variable Displacement-Single Pumps Electro-Hydraulic Proportional & Flow Type 6 / / 7 / 6 / 7 / 9 / Model Number Designation Safety valve Input Signal for Flow Input Signal for mplifier Proportional Solenoid

More information

SHUT-OFF TYPE SOLENOID OPERATED DIRECTIONAL VALVES DSPC/DSPG-01/03(1/8,

SHUT-OFF TYPE SOLENOID OPERATED DIRECTIONAL VALVES DSPC/DSPG-01/03(1/8, SHUT-OFF TYP SOLNOID OPRATD VALVS DSPC/DSPG-/(/8, /8) Cartridge Type / Mounting Up to 5 MPa (6 PSI), 8 (. U.S.GPM) Pub. C- The shut-off type solenoid operated directional valves are poppet type solenoid

More information

EH SERIES PROPORTIONAL ELECTRO-HYDRAULIC CONTROL VALVES

EH SERIES PROPORTIONAL ELECTRO-HYDRAULIC CONTROL VALVES Pub. EC- E SERIES ELECTRO-YDRAULIC CONTROL VALVES Pilot Relief / Relief / Reducing and Relieving / Flow Control / Flow Control and Relief / Directional and Flow Control Up to. ( PSI), L/min (6 U.S.GPM)

More information

AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%

AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74% PISTON PUMPS EIC--11- Features Smaller in Size and Lighter in Mass s indicated in the dimensional comparison presented below, the R1 is smaller than the 1(3 design). lso, the mass of R1 is substantially

More information

FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page

FLOW CONTROL VALVES F CONTROL VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] Maximum flow rate L/min. Page F FLOW CONTROL VALVES F FLOW CONTROL VALVES Model [Model No.] Maximum operating pressure MPa {f/cm } Maximum flow rate 5 5 5 Page Flow control valve [SF] 7 {7} F- Flow control valve Flow control valve

More information

A Series Variable Displacement Piston Pumps

A Series Variable Displacement Piston Pumps A Series Variable Displacement Piston Pumps A37 A56 A1637 A16 A10 A Series Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement cm 3 /rev 1 5 10 0 50 100 00 300 Maximum Operating

More information

E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts

E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts ydraulic Relief s The electro hydraulic relief valve is designed for compactness and high efficiency. The valve provides fast proportional response to the input current. For linear pressure control a special

More information

Reducing Valve/Reducing Valve with Check Valve

Reducing Valve/Reducing Valve with Check Valve Reducing Valve/Reducing Valve with Check Valve Nomenclature JIS graphic symbols for hydraulic system JGB JGBC Features - JGB - - - Applicable fluid code No designation: Petroleum-based hydraulic fluid,

More information

These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8

These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8 DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10

More information

PISTON PUMPS. A3H Series High Pressure Variable Displacement Piston Pumps. Features. A3H Series Variable Displacement Piston Pumps.

PISTON PUMPS. A3H Series High Pressure Variable Displacement Piston Pumps. Features. A3H Series Variable Displacement Piston Pumps. 3H Series High Variable EIC--13- Features 1 Control System for Wide Range pplication: 1 Compensator Type 3H Series High Variable 9 Constant Power Control Type 1 Load Sensing Type For these controls system,

More information

A Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.

A Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics. EIC--12- PISTON PUMPS Series Variable Features High efficiency Under the conditions of pressure 16 Kgf/cm² and speed 18 r/min. volumetric efficiency is over 98% and the overall efficiency is over 9%. Low

More information

VANE PUMPS. Output Flow at 1200 r/min at No-Load U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols.

VANE PUMPS. Output Flow at 1200 r/min at No-Load U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. B VANE PUMPS Pump Type "PVR" Series Single Pumps Graphic Symbols at r/min at No-Load.. PVR PVR PVR PVR Maximum Operating MPa (PSI) () Page Fixed Displacedment "PVRA" Series Single Pumps "PVR" Series Double

More information

50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination 3

50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination 3 T,T,F SERIES Fixed Displacement-Single, Double, Combination Up to 7 MPa ( PSI), 9 cm /rev (. CU.IN./rev) Single Pumps These pumps are widely used as a source of hydraulic power. They combine stable performance

More information

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F

More information

High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves

High Response Type Proportional Electro-Hydraulic Directional and Flow Control Valves igh Response ype roportional Electro-ydraulic s igh response, high precision and high reliability are achieved by a combination of compact and powerful solenoid and spool-position-detection LVD. Direct

More information

Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32.

Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32. These valves protect the hydraulic system from excessive pressure, and can e used to maintain constant pressure in a hydraulic system. Remote control and unloading are permitted y vent circuit. PRESSURE

More information

Proportional Electro-Hydraulic Flow Control (and Check) Valves

Proportional Electro-Hydraulic Flow Control (and Check) Valves Proportional Electro-Hydraulic Flow Control (and Check) Valves EH SERIES The system flow rate can be controlled remotely as desired by regulating input voltage. Further, since pressure and temperature

More information

Type C2 Seat Type Solenoid Pilot Valve

Type C2 Seat Type Solenoid Pilot Valve Type C Seat Type Solenoid Pilot Valve JIS graphic symbols for hydraulic system T eatures No hydraulic locking occurs even during long periods of pressurized operation Nomenclature 1 3 5 - - - - - 1 3 5

More information

OBE (On-Board Electronics) Type Direct Operated Linear Servo Valves (Size: 01 & 03) LSVG-01-EH-*-**-**-10, LSVG-03EH-*-**-**-10/1006

OBE (On-Board Electronics) Type Direct Operated Linear Servo Valves (Size: 01 & 03) LSVG-01-EH-*-**-**-10, LSVG-03EH-*-**-**-10/1006 NO. 10 01E September 1, 2010 Public Relations Group Products Publicity Section Sales Administration Department Hamamatsucho Seiwa Bdg., 4-8, Shibadaimon 1-chome, Minato-ku, Tokyo 105-0012, Japan Tel: +81-3-3432-2113

More information

PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS

PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200

More information

Modular Valves. Ratings

Modular Valves. Ratings High Pressure, High Flow Rate Features Installation and mounting space can be minimized. No special skill is required for assembly and any addition or alternation of the hydraulic circuit can be made quickly

More information

PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.]

PROPORTIONAL VALVES SERVO VALVES. Maximum operating pressure MPa {kgf/cm 2 } Model [Model No.] J PROPORTIONAL VALVES SERVO VALVES J Model [Model No.] Solenoid pilot operated proportional relief valve [JRP] Solenoid operated proportional relief valve [JRPL] Type C2 solenoid operated proportional

More information

FLOW CONTROL VALVES 1-STEP FLOW CONTROL VALVE WITH SHUT-OFF VALVE E 10

FLOW CONTROL VALVES 1-STEP FLOW CONTROL VALVE WITH SHUT-OFF VALVE E 10 -STP FLOW CONTROL VALV WITH SHUT-OFF VALV HFD WITH PRSSUR COMPNSATION, WITH PRSSUR AND TMPRATUR COMPNSATION This is a compound valve built by assembling a flow control valve with pressure, a shut off valve

More information

Pressure Relief Valves

Pressure Relief Valves VICKERS Pressure Relief Valves Unloading Relief Valves EURG1/2-06/10, 13 Design and EURT1/2-06/10, 12 Design Sectional Illustrations EURG* EURT* Basic Characteristics Mounting... Pipe or subplate mounting

More information

ARL1 Series Piston Pumps. ARL1 Series Piston Pumps. Geometric Displacement. Maximum cm 3 /rev

ARL1 Series Piston Pumps. ARL1 Series Piston Pumps. Geometric Displacement. Maximum cm 3 /rev ARL1 Series Piston Pumps Geometric Displacement Maximum cm 3 /rev Operating Pump Type Graphic Symbol Pressure Page 1 2 5 10 20 50 100 150 MPa ARL1-6 Piston Pump ARL1-8 ARL1-12 7 8 ARL1-16 5 Hydraulic Fluids

More information

Pressure Control Valves

Pressure Control Valves efore using the product, please check the Pressure ontrol Valves JIS graphic symbols for hydraulic system Refer to the next page. Features These direct operated control valves can be used as sequence valves,

More information

PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS

PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS H PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS Hydraulic Controls H-3 H-1 E Series Hydraulic Controls Hydraulic Controls Max. Maximum Flow Types KS Graphic Symbols Operating L/min 1 2 3 5 10 20 30 50 100 200

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Solenoid Pilot Operated Directional Control Valve Features The highly reliale KSO-2 adopted as the pilot valve ensures long service life and stale operation. 1 Nomenclature - JS - - - - 1 2 3 4 5 7 8 9

More information

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691 Vickers Piston Motors Inline Piston Motors Fixed and Variable Displacement Revised 5/99 691 Table of Contents Introduction........................................................................................

More information

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31. F MODULES YUKEN's are stack type valves, and require no piping. They not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking systems

More information

RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)

RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min) R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve

More information

RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled

RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled RELIEF VALVES Remote ontrol / Direct ype ilot Operated / Solenoid ontrolled Up to 5 Ma (3630 SI), 0 L /m in (06 U.S.GM) ub. E-00 Remote ontrol Relief Valves... age 3 his valve is used as a remote control

More information

VSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000

VSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000 Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve

More information

Pressure Control Valves

Pressure Control Valves Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal

More information

Pressure sequence valve pilot operated

Pressure sequence valve pilot operated /6 Pressure sequence valve pilot operated.4 Type DZ...L Sizes to Up to bar Up to 6 L/min Contents Function and configuration Symbols Specifications Technical data 4 Characteristic curves 4 Unit dimensions

More information

EHBG-03 EHBG-06 EHBG-10. Refer to Model No. Designation. 2% or Less(1%) 1% or Less *2. Refer to frequency Response on page V DC

EHBG-03 EHBG-06 EHBG-10. Refer to Model No. Designation. 2% or Less(1%) 1% or Less *2. Refer to frequency Response on page V DC Proportional Electro-ydraulic These valves, consist of a small size but high performance E series electro-hydraulic proportional pilot relief valve and a low noise type relief valve. The valves control

More information

Directional Controls

Directional Controls Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10

More information

BST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.

BST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol. Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications

More information

Variable Displacement Piston Pumps

Variable Displacement Piston Pumps A3HG Series High Pressure Variable Displacement Piston Pumps A3HG71 A3HG1 A3HG Through Drive A3HG Series High Pressure Variable Displacement Piston Pumps Pump Type Graphic Symbol Geometric Displacement

More information

Piston Pumps PVH Variable Displacement

Piston Pumps PVH Variable Displacement Piston Pumps PVH Variable Displacement Model Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Piston pump, variable displacement 2 Maximum geometric displacement 057 57.4 cm3/r [3.50 in3/r] 063 63.1 cm3/r [3.85

More information

DENISON HYDRAULICS Premier Series. open circuit pump controls P16 B-mod, P09 A-mod. service information

DENISON HYDRAULICS Premier Series. open circuit pump controls P16 B-mod, P09 A-mod. service information DENISON HYDRAULICS Premier Series open circuit pump controls P6 B-mod, P0 A-mod service information Publ. S-AM06-A replaces S-AM06 Internet: http://www.denisonhydraulics.com E-mail: denison@denisonhydraulics.com

More information

Directional Controls

Directional Controls VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................

More information

Solenoid Pilot Operated Proportional Directional Control Valve

Solenoid Pilot Operated Proportional Directional Control Valve Solenoid Pilot Operated Proportional Directional Control Valve Features hese solenoid pilot operated proportional directional control valves use a nozzle flapper valve as pilot valve and perform spool

More information

Low Noise Type Solenoid Controlled Relief Valves

Low Noise Type Solenoid Controlled Relief Valves he low-noise solenoid controlled relief valve is a combination of a low-noise type pilot operated relief valve and a solenoid operated directional valve. It is used for no-load pump operation by using

More information

9 Shaft type N = Metric, to DIN/ISO 3019, Part 2 and VDMA 24560, Part 1 Y = SAE models P*B5 to 15 only. Omit for 20 thru 90 models

9 Shaft type N = Metric, to DIN/ISO 3019, Part 2 and VDMA 24560, Part 1 Y = SAE models P*B5 to 15 only. Omit for 20 thru 90 models Model Codes P *** -(F)-(M) * *(F)(X) (*)-** -**-(C)-(G)-(L)- ** -**** 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 F V asic models = Fixed displacement type = Variable displacement type 2 Displacement PF and

More information

Series PHP10 Variable Volume, Piston Pumps

Series PHP10 Variable Volume, Piston Pumps Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable

More information

LogSplitterPlans.Com

LogSplitterPlans.Com Hydraulic Pump Basics LogSplitterPlans.Com Hydraulic Pump Purpose : Provide the Flow needed to transmit power from a prime mover to a hydraulic actuator. Hydraulic Pump Basics Types of Hydraulic Pumps

More information

AXIAL PISTON PUMPS SHPV SECTIONAL VIEW

AXIAL PISTON PUMPS SHPV SECTIONAL VIEW AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically

More information

Pressure Compensated Flow Control Valve

Pressure Compensated Flow Control Valve Pressure Compensated Flow Control Valve Screw Type Knob Type Solenoid Type Solenoid & Modular Type Temperature and Pressure Compensated Flow Control Valve www.steedmachinery.com.tw Contents Pressure Compensated

More information

4 Flow Control Valves. Notes

4 Flow Control Valves. Notes Flow Control alves Content Flow Control alves Notes Example Flow l/min (GM) ressure bar (I) Code Cartridge ize ; D ize ; D ize ; D Line Mounted age Data heet Needle - Restrictor alves and alves with Reverse

More information

Proportional Valves. Proportional solenoid valves for pressure and flow control

Proportional Valves. Proportional solenoid valves for pressure and flow control Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical

More information

Proportional Valves. Proportional Two-Stage Directional Valves

Proportional Valves. Proportional Two-Stage Directional Valves VICKERS roportional Valves roportional Two-Stage Directional Valves KHDG5V-5/7, 1 Series ressures to 3 bar ( psi) This product has been designed and tested to meet specific standards outlined in the European

More information