Band Hanger PRODUCT SPECIFICATIONS 1 0F 2. Product Features. Certifications
|
|
|
- Milo Phillips
- 5 years ago
- Views:
Transcription
1 PRODUT SPEIITIONS 0 2 and Hanger Product eatures Range: 2" through 8" Material: arbon steel inish: alvanized Maximum Temperature: 60 Threads are countersunk so that they cannot become burred or damaged. Knurled swivel nut provides vertical adjustment after piping is in place. aptured swivel nut in the 2" through 6" sizes. The capture is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out. ertifications pprovals: omplies with ederal Specification --92 (Type 0) WW-H-7-E (Type 0), NSI/MSS SP-69 and MSS SP-8 (Type 0). UL Listed and M pproved (s 4" - 8"). aution: The acceptability of galvanized coatings at temperatures above 40 is at the discretion of the end user. ( " through 8") Warranty See warranty information for more details ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger rev
2 PRODUT SPEIITIONS and Hanger L L /2" through " pipe " through 8" pipe and Hanger: Loads (LS) Weights (LS) Dimensions (IN) Pipe To Submit Part No. Max Load Weight Rod Width /2" - " ML See Table elow for Dimensions " ML /2" ML " ML /2" ML " ML " ML " ML76, " ML766, " ML767, and Hanger: Dimensions (IN) Pipe /2" " " ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger rev
3 PRODUT SPEIITIONS 0 2 and Hanger opper Product eatures Range: 2" through 4" Material: arbon steel inish: opper plated Threads are countersunk so that they cannot become burred or damaged. Knurled swivel nut provides vertical adjustment after piping is in place. aptured swivel nut will not fall off. ertifications pprovals: omplies with ederal Specification --92 (Type 0), WW-H-7-E (Type 0), NSI/MSS SP-69 and MSS SP-8 (Type 0). Warranty See warranty information for more details ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger - opper rev
4 PRODUT SPEIITIONS and Hanger opper 8" 8" L L /2" through " tube /2" through 4" tube and Hanger opper: Loads (LS) Weights (LS) Dimensions (IN) To Submit Part No. Max Load Weight Width /2"- " ML See Table elow for Dimensions /2" ML " ML /2" ML " ML " ML /2 and Hanger opper: Dimensions (IN) /2" " " " ll dimensions listed are nominal. MINLINE reserves the right to Mainline and Hanger - opper rev
5 PRODUT SPEIITIONS 0 2 elt Lined and Hanger Product eatures Range: 2" through 4" copper tube Material: arbon steel inish: alvanized Maximum Temperature: 20 Recommended for the suspension of non-insulated stationary copper tubing. The layer of felt seperates the copper tubing from the steel hanger for electrolytic resistance and also minimizes noise and vibration. Threads are countersunk so that they cannot become burred or damaged. Knurled swivel nut provides vertical adjustment after piping is in place. The captured swivel nut is permanent in the bottom portion of the band, allowing the hanger to be opened during installation if desired, but not allowing the nut to fall completely out. ertifications pprovals: omplies with ederal Specification --92 (Type 0) WW-H-7-E (Type 0), NSI/MSS SP-69 and MSS SP-8 (Type 0). Warranty See warranty information for more details ll dimensions listed are nominal. MINLINE reserves the right to Mainline elt Lined and Hanger rev
6 PRODUT SPEIITIONS elt Lined and Hanger elt Lined and Hanger: IPS Sizing Dimensions (IN) /2" & " tube /2" through " elted Hanger L L " through 4" tube " through 4" elted Hanger Pipe elted Hanger /2" 2 - " " " 2 /2" 2 2" 2 /2 2 /2" " 4 elt Lined and Hanger: Loads (LS) Weights (LS) Dimensions (IN) elted Hanger To Submit Part No. Max Load Weight Rod Width /2"- " /2" - " ML See Table elow for Dimensions ", " " ML See Table elow for Dimensions /2" /2" ML " 2" ML / /2" 2 /2" ML / " " ML " 4" ML /6 4 4 elt Lined and Hanger: Dimensions (IN) elted Hanger /2" /2"- " 2 /6 /6 9 /6 " /2"- " 2 2 /6 /6 " " " " ll dimensions listed are nominal. MINLINE reserves the right to Mainline elt Lined and Hanger rev
SURGE RESTRAINT FIG. 055
NFPA SWIVL RING HANGR Function: esigned for the suspension of non-insulated stationary pipe lines. The knurled insert nut that allows a vertical adjustment after installation, is tapped to NFPA reduced
Fig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece
ig. xtension piece Range: " through " Material: Malleable iron Maximum Temperature: 40 Service: or attaching hanger rod to various types of building attachments. pprovals: UL Listed ( " - " rod size) and
Pipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
SPECIFICATION DATA. PIPE COVERING PROTECTION SADDLE #70 (1" Insulation) # 94/95 # 93 COVERING (LBS.) 3/4 1 9/ /16 2 1/2 7/ /16 5 3/8
PIPE OVERING PROTETION SALE #70 (1" Insulation) 3/4" through " arbon Steel omplies with MSS SP- and MSS SP-9 (Type 39). esigned to protect pipe insulation from crushing, enter rib starts at " IP IRON PIPE
Pipe Hangers and Supports
November 20 or the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Hangers and U I L I N G O N N E T I O N S T H T L S T UILING ONNETIONS THT LST
Our hangers and supports can be found all over the world!
HISTORY Our roots can be traced to the mid-800 s and to the founding father of our company, rederick J. Grinnell - a time when blacksmiths used their hands to form steel into usable hanger products. Today
CLEVIS HANGER 401. Standard Duty B A
CLEVIS HNGER 40 Standard Duty Size Range: /2 through 24 Surface Finish: Electro-zinc plated non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection
Pipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
HANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.
Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive
Process Filtration From Pure to Sterile
rom Pure to Sterile MIN TURS & NITS: High quality stainless steel design xtremely low differential pressure Various connection types rom 60 m 3 /h up to 19.200 m 3 /h INDUSTRIS: ood & everage ngineering
Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
BRONZE FITTINGS. Class 125 (150) For steam, water, gas, oil and air service Standard specifications PRICING FILE AVAILABLE ONLINE
NIPPLES & FITTINGS RONZE FITTINGS U L UL842, UL258, UL125, Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM 62-93 (85,5,5,5) C83600 PRICING FILE VILLE
M J G O.D. B.C. A B I.D. C O.D. A B C I.D. B.C.
DI S TR Utility Pipe ittings and ccessories MJ ccessories NSI/WW 111/21.11 GLNDS, GSKETS, OLTS & NUTS GENERL SPEIITION MTERIL: PRESSURE: TESTING: DIMENSIONS: WEIGHTS: OTING: Ductile Iron per STM 536 350
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
Reference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
VARIABLE SPRING SUPPORTS
LIK HERE TO STRT VRILE SPRING SUPPORTS Variable atalog 2V WRRNTY PHS Industries Inc. ( PHS ) warrants to the original buyer (the uyer ) of products manufactured by it that all such products will be free
Product Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
PHD Manufacturing, Inc.
4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most
q Quadruple Spring: Standard Type: q A, q B, q C, q D, q E, q F, q G q Quadruple Spring-CR: Corrosion Resistant SPRING HANGERS
q Quadruple Spring: Standard Type: q A, q, q, q, q E, q, q G q Quadruple Spring-R: orrosion Resistant Type: q A, q, q, q, q E, q, q G Quadruple Spring Hangers esign features: Precompression. Precompressing
PIPE SUPPORT HARDWARE
atalog No. 6. WITH PIPE SUPPORT SYSTEMS PIPE SUPPORT HRDWRE RPENTER & PTERSON, IN. DESIGNERS ENGINEERS MNUFTURERS Introduction Since 9 arpenter & Paterson, Inc. has specialized in the manufacture and distribution
Pipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
STANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
Bronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
DECRIPTION: Stranded copper conductor PVC insulation Flexible PVC Jacket
FLEXIBLE PWER RDS SVT JKETED FLEXIBLE RD DERIPTIN: Stranded copper conductor PV insulation Flexible PV Jacket Power cords for vacuum cleaners or oer electric and electronic appliances. PRPERTIES: Flexible,
CHILLED WATER DUCTED FAN COIL
SD CHILLED WATER DUCTED AN A Series B Series (Double Skin) General abricated with a rigid galvanized steel casing. The DIDW centrifugal fans have balanced, galvanized steel, and forward curved blades.
ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
SECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net 1
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
SEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York Bulletin 617 Rev. C
ulletin 617 Rev. Model R ommercial Riser Riser Manifold for ommercial pplications ulletin 617 Rev. vailable Sizes/Pressure Ratings: 1 1 / 2 (40mm) and 2 (50mm) Threaded - 250 psi (17,2 bar) Working Pressure
Carbon Kevlar hinges
arbon Kevlar hinges arbon Kevlar hinges arbon Kevlar hinges - 36 mm width inge is constructed of rigid leaves and a fl ex unit. The rigid leaves are wowen carbon fi bre in an epoxy matrix. The Kevlar fl
General Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
Level Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 5/16 Siemens FI Overview.
Level Measurement Pointek LS200 Standard Siemens A 20 Overview onfiguration Installation Pointek LS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable
CCTF LOOKING BACK AND BEYOND
CCTF LOOKING BACK AND BEYOND CCTF was incorporated in Canada in 1952 as Clyde Tube Forging, a manufacturer of butt weld fittings originally from Scotland. EMCO Limited purchased the company in 1954. The
IL 450 Series. LED Industrial Lighting. Application - Mid / High Bay. Advantages of IL450
LED Industrial Lighting Advantages of IL450 Application - Mid / High Bay Proprietary Reflector and Optics enabling glare-free uniform lighting for all working environments. Eliminating the need for costly
General Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
GT All SS Industrial Dial Thermometer Gas Filled system
TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil
TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
TYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
General Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Finish and special materials
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Design Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and
IL 450 Series. LED Industrial Lighting. Application - Mid Bay. Advantages of IL450
LED Industrial Lighting Advantages of IL450 Application - Mid Bay Proprietary Reflector and Optics enabling glare-free uniform lighting for all working environments. Eliminating the need for costly and
Model ZW204 Non-Modulating Float Valve
Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the
CADDY ROD LOCK THREADED ROD MOUNTING SYSTEM BUILD. Assemble on the ground or off-site LIFT. Raise assembly to ceiling DONE. Level, tighten lock nut
CDDY ROD OCK TREDED ROD MOUNTING SYSTEM BUID ssemble on the ground or off-site IT Raise assembly to ceiling DONE evel, tighten lock nut CDDY ROD OCK Threaded Rod Mounting System P. 3-4 CDDY ROD OCK Beam
VITALITY Centrifugal Large Split
VITITY entrifugal arge Split V-VIR 20 to 90 complete range from 16.8 kw up to 87.3 kw Y2open eatures ew Y2open board igh efficiency R and P conomizer or motorized damper Indoor air quality ot water coil
Elimsan High Voltage Disconnectors
Elimsan High Voltage Disconnectors Pantograph Type Center-Break Type Double-Break Type Vertical-Break Type Standards IEC 62271-102 IEC 62271-1 Nature is our most distinguished partner YG-EN-12-01 Elimsan
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
*Applies to 6 x 4" No. 650 Reducer only. C to E. No No º Elbow Approx. Wgt. Each Lbs. kg. C to E Inches mm JOB/OWNER CONTRACTOR ENGINEER
SEE VITAULI PULIATION 0.0 FOR DETAILS TS fittings for use with Style 606 copper connection couplings or Style 64 Vic-Flange Adapters. Fittings are full flow, standard radius wrought copper supplied roll
Available in sizes DN 25, 30, 40 and 50 mm, Multimag TM is a class B multi-jet turbine meter for commercial and industrial applications.
Multimag TM Multi-jet Turbine Water Meter DN 25 to DN 50 mm haracteristics Velocity type meter Direct magnetic transmission lass ISO 4064 vailable in sizes DN 25, 30, 40 and 50 mm, Multimag TM is a class
Pipe hangers & ss floor drains
Pipe support systems, Pipe hangers & ss floor drains profile Sprinkler hanger ABOUT US: With over two decades of experience Aqua Arab Trading Co is a leading exporter and reseller of Hardware solutions
SECTION 27XXXX PATHWAYS FOR COMMUNICATIONS SYSTEMS
STON 27XXXX PTWYS OR OMMUNTONS SYSTMS Part 1. NRL 1.1 STON NLUS: The work under this section shall consist of the furnishing of all necessary material, labor and associated services required to complete
University of Delaware
SECTION 23 36 00 _ SUMMARY PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Constant/Variable volume supply terminal units. 2. Fan powered terminal units. 3. Exhaust valves B. Related Sections: Section
INTRODUCTION SAKETH EXIM
Certificates INTRODUCTION SAKETH EXIM is an Industrial Powerhouse with a dominant presence in Manufacturing and Fabrication of Metal Products used in Pipe Support Systems, HVAC Anti Vibration System and
Product Description. MASTER HPI Plus. Quartz metal halide lamps with opalized outer bulb
Product Description MASTER HPI Plus Quartz metal halide lamps with opalized outer bulb Benefits High safety and comfort level, maintained over life Minimal maintenance cost Initial investment saving options
Pipe Supports PS 1. PO Box Highbrook Auckland
1 salesinfo@mechanicalsupport.co.nz PO ox 204336 Highbrook uckland www.mechanicalsupport.co.nz 2 2 Piece lips To Suit Outside Pipe iameter Width x Thickness E2024 HG 8 32 x 1.6 0.04 E2025 HG 11 32 x 1.6
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
GUIDE SPECIFICATIONS. WW Series Water-to-Water Reverse Cycle Chillers & Low Temp Boilers. WW Reverse Cycle Chillers / Low Temperature Boilers
GUIDE SPECIFICATIONS WW Series Water-to-Water Reverse Cycle Chillers & Low Temp Boilers WW024-072 Reverse Cycle Chillers / Low Temperature Boilers GENERAL Units shall be Underwriter Laboratories (UL) listed
Electronic Faucet 1500T & 1501T Series
Electronic Faucet 1500T & 1501T Series Specification: (example) Battery (4 cell) or Hardwire (24 V) infrared electronic handwash system H 2OPTIS technology no external adjustments required hrome plated
DRY-EXPANSION EVAPORATORS
DRY-EXPNSION EVPORTORS DP-273-1 EN DH SERIES RF SERIES Table of contents Performance and features 3 Design data 4 PED (E) approval 4 Denomination 4 Materials 5 apacity and maximum allowable water flow
NETBOOK CART DIVIDER WIRING INSTRUCTIONS Extra cord
NETBOOK CART DIVIDER WIRING INSTRUCTIONS Extra cord Ensure there is slack here Lay divider flat on work surface. Lay laptop and power brick on top of divider, with the computer end of the power wire towards
SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP
SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP VARIABLE SPRING ELEMENTS CONTENTS PAGE 0 Spring hangers, spring supports, sway braces.1 Load table for spring hangers, spring supports and other spring elements.3
Load Centers and Circuit Breakers
Midwest lectric Products Load enters and ircuit reakers MLM4020U TQL2140 TQL11202 TQL1115 TQL2120T Midwest Load enters pplication Information Midwest load centers lower your costs by making installation
Pipe Hangers, Strut & Accessories
I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
CHILLED WATER FAN-COIL UNITS
40LM - PRODUCT DATA DIGEST CHILLED WATER FAN-COIL UNITS QUALITY SYSTEM MALAYSIA MS ISO 001 REG. NO: AR 023 1 Any room, every room flexibility in an air conditioning system FEATURES: Chilled Water Furred-in
Fluid Cooling Shell & Tube B / SB Series
Fluid ooling Shell & Tube / S Series 0916 erformance Notes Young Touchstone thermal interchange ompetitively priced 1/4" or 3/8" tubes available Water to water applications Sea water applications, O-Ring,
The multi-purpose industrial butterfly valve.
utterfly valves JM The multi-purpose industrial butterfly valve. Features and enefits Due to its robust design, the JM is a PN25 rated butterfly valve. Top flange standardized to adapt any type of actuator,
FDYMP-D, FDP-D, FGP-D, FDYP-E, FGYP-E
R407C TECHNICAL MANUAL Split Systems Air Conditioner Ducted Blower D & E Series FDMP-D, FDYMP-D, FDP-D, FGP-D, FDYP-E, FGYP-E series Cooling only & Heatpump [50Hz] Table of Contents Table of Contents
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
MIN. DEPTH OF COVER TO TOP OF DUCTS (C) 450 mm CL 804 CL mm. 600 mm CL mm. 750 mm CL mm CL 804
ISO 9001: 008 NSI ertified 4 1 3 4 5 6 7 8 INISH SUR LVL PRMNNT RINSTTMNT TO OMPLY WITH LOL UTHORITY SPIITION / RWIN WRNIN TP X YLLOW MRKR WRNIN TP mm WI S O : 9590 OR TRNH KILL TILS RR 1 X R L MRKR (0
Male - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.
Visual Index 30182-166 31382-166 30282-167 37G82-167 NPTF Pipe Male - Rigid 30382-167 Male - Swivel 30682-168 Female - Rigid 33782-168 NPSM Pipe 33982-168 Gasket Joint 34182-168 JI 37 S Male - Rigid 30482-169
Applications Mill Mill Mill Mill. 9007T Convertible sequence. L100 Fixed sequence. Extra heavy duty contact ratings. Extra heavy duty contact ratings
Selection Guide Severe Duty Mill and Foundry Switches pplications Mill Mill Mill Mill Design 9007T Convertible sequence L0 Fixed sequence L14 Single Cable Pulls Fixed sequence L525 elt Conveyor Fixed sequence
Model Dimming Output CRI C.C.T. Reflector Optical Accessories Shell Color Suspension Options AP
PROJECT Job Notes Type Part # SPECIFICATIONS Source Cree CXB Integrated LED Array, up to 161 lm/w C.C.T. 2700K, 3000K, 3500K, 4000K or 5000K Color Consistency 3x3 SDCM (MacAdam) CRI (Ra) 80 or 92 Driver
PANEL & CARTRIDGE FILTERS
PANEL DISPOSABLE FILTER These inexpensive and disposable filters can be used as pre-filters and secondary filters. With a 35% ASHRAE rating, these filters efficiently remove larger particulate from the
Conduit Hubs, Cable Glands & Breather
onduit Hubs, able Glands & reather SSORIS onduit Hubs: or connecting conduit. Sizes - NPT. or Hazardous (classified) Locations. Zinc. able Glands: or connecting all types of cables. Sizes - 4" NPT. or
AAA TECHNOLOGY & SPECIALTIES CO., INC
TRI*CORE SINGLE INTERNAL/EXTERNAL OR DOUBLE-WALLED COMPOSITE "PATENT PENDING" AAA TECHNOLOGY & SPECIALTIES CO., INC Celerating 9 Years of Service to Industry Since 97 Introduction to TRI*CORE TRI*CORE
Conduit Hubs, Cable Glands & Breather
onduit Hubs, able Glands & reather SSORIS onduit Hubs: or connecting conduit. Sizes - NPT. or Hazardous (classified) Locations. Zinc. able Glands: or connecting all types of cables. Sizes -4" NPT. or Wet
Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division
Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components
CNC DISTRIBUTION. ITEM NO Description Quantity. * 2ea Bolts and Nuts * Steel Hinged Body * Neoprene Gasket
Steel and Stainless Pipe Repair Clamp * 2ea Bolts and Nuts * Steel Hinged Body * Neoprene Gasket Steel Hinged Pipe Repair Clamp CNC1530 1/2 Steel Pipe Repair Clamp 10 CNC1531 3/4 Steel Pipe Repair Clamp
Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008
ROSE+BOPL PHOENIX MECNO COMPNY Polycarbonate Watertight 03 Product Drawings Last Updated 6/18/2008 Rose+Bopla Enclosures 7330 Executive Way Frederick, MD 21704 301-696-9800 www.rose-bopla.com rbinfo@pm-usa.com
NSW GEOTHERMAL HYDRONIC HEAT PUMP 1.5 TO 6 TONS. Submittal Data English Language IP/Metric Units SD2556WN 06/16
NSW EOTMAL HYDONI AT PUMP 1. TO 6 TONS Submittal Data English Language IP/Metric Units SD26WN 06/16 ontractor: VESATE ULTA NSW HYDONI 1. TO 6 TONS Model Nomenclature 1- -6 8 9 11 NSW 00 H 2 0 A 12 1-1
Electronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
XN Electric Chain Hoists LIFTING WITH EFFICIENCY
SERVICE MACHINE TOOL SERVICE LIGHT LIFTING INDUSTRIAL PROCESS PORT LIFT TRUCKS YARD IT XN Chain Hoists LIFTING WITH EFFICIENCY Konecranes Konecranes XN Electric chain hoists XN hoist with low XN hoist
ComPACT. Commercial kw Water Source/Geothermal Heat Pump - 50Hz. Submittal Data English Language/IP Units SD1025AN 07/12
ompat ommercial 005-017 Water Source/eothermal Heat Pump - 50Hz Submittal Data English Language/IP Units SD1025AN 07/12 Model Nomenclature 1-3 NBK 4 V 5-7 009 8 T 9 L 10 7 11 0 12 4 13 14 A 15 N 16 A 17
08.12 Vic-Plug Balancing Valve
Series 377 Vic-Plug balancing valve is the only eccentric grooved end plug valve made specifically for throttling services. For 3 12"/80 300 systems, Victaulic Style 307 transition couplings are available
Certification: Classification: IP20
2.5 SQURE ED ETURES: Construction: Each separate unit is made from an extruded aluminum body with anodized or white powder coat. silver grey or white powder coat connector plate at each end allows easy
10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
Heating Cable. Ordering Information SRL-C SRL-CR, CT SRP-C, SRP-CT CWM-C CWM-CT SRL-MC SRL-MCR, MCT SRM/E-C SRM/E-CT SRL-C SRL-CR, CT SRP-C, SRP-CT
L & L eries onnection ccessories L eries Re-usable omponents Through-the-nsulation Mounting Provides High Visibility asy ccess for Maintenance RTP RTT RT L eries Low Profile Provides asy nstallation of