ComPACT. Commercial kw Water Source/Geothermal Heat Pump - 50Hz. Submittal Data English Language/IP Units SD1025AN 07/12

Size: px

Start display at page:

Download "ComPACT. Commercial kw Water Source/Geothermal Heat Pump - 50Hz. Submittal Data English Language/IP Units SD1025AN 07/12"

Richard Walsh
5 years ago
Views:

1 ompat ommercial Water Source/eothermal Heat Pump - 50Hz Submittal Data English Language/IP Units SD1025AN 07/12

2 Model Nomenclature 1-3 NBK 4 V T 9 L A 15 N 16 A 17 N A SS 24 A Model Type NBK = 50 Hz abinet onfiguration V = Vertical H = Horizontal Unit apacity Single Speed 005, 017 Dual apacity 006, 009, 012, 015 Discharge onfiguration T = Top (vertical) E = End (horizontal) S = Side (horizontal) Return Air onfiguration L = Left R = Right Voltage 6 = /50/1 ( ) 7 = /50/3 ( ) Refrigeration Option 0 = None 2 = HW only w/o pump (Vertical) = Hot as Bypass R = Hot as Reheat B = Hot ass Bypass w/ Hot as Reheat Blower Option 1 = Variable Speed EM Blower 4 = 5-Speed EM Blower Water oil Option = opper D = Insulated opper N = upronickel P = Insulated upronickel Sound Kit Option A = None B = Sound Kit Vintage A = urrent Non-Standard Option Details SS = Standard Option Drain Pan Option 0 = omposite, No Secondary onnection 1 = omposite, Secondary onnection 2 = Stainless Steel, No Secondary onnection 3 = Stainless Steel, Secondary onnection Air oil Option 1 = Standard 2 = FormiShield Filter Option A = MERV 4 B = MERV 13 abinet Option 0 = Unpainted abinet, Filter Rail 1 = Painted abinet, Filter Rail 2 = Unpainted abinet, 4-sided Filter Rack 3 = Painted abinet, 4-sided Filter Rack Electrical Option N = None A = IntelliStart Only E = IntelliStart and Disconnect P = Phase uard, No Disconnect B = Phase uard, Disconnect D = No Phase uard, Disconnect ontrols Option A = Aurora TM Base ontrol (AB) 4 = FX10 std. no communication 5 = FX10 w/ Open N2 om ard 6 = FX10 w/ LonWorks om ard 7 = FX10 w/ BacNet om ard Water ontrol Option N = None R = Water Flow Regulator V = 2-Way Valve B = 2-Way Valve w/ Water Flow Regulator NOTE: Phase guard only available on /50/3 SD1025AN 07/12 2 Page of

3 BS EN Performance Ratings Variable Speed Em and 5-Speed Em motors model apacity modulation Flow Rate Wa te r L/s Air L/s ooling Tower Water-to Brine ontrol abinet lose ontrol Water Brine Water Loop ooling EWT 30 apacity output EER (W/W) ooling EWT 10 apacity output ooling EWT 15 apacity EER (W/W) output EER (W/W) ooling EWT 30 apacity output Heating EWT 10 apacity EER output (W/W) op Heating EWT 0 apacity output op Heating EWT 20 apacity output 005 Single Full Part Full Part Full Part Full Part Single ooling capacities based upon 27 DB, 19 WB entering air temperature for cooling tower and water to brine, 35 DB and 24 WB for control cabinet, and 24 DB and 17 WB for close control. Heating capacities based upon 20 DB, 15 WB entering air temperature op Legend ABBREVIATIoNS AND DEFINITIoNS: OP = coefficient of performance EER = cooling energy efficiency (T/) ELT = entering load fluid temperature EST = entering source fluid temperature to heat pump FLA = full load amps FtHd = pressure drop in feet of head gpm = US gallon per minute H = heating capacity in HE = heat of extraction in HR = heat rejected in kpa = kilopascal = kilowatt onversions: x F = (x - 32)/1.8 1 bar = 100 kpa 1 gpm = L/s L/s = liters per second LLT = leaving load fluid temperature from heat pump LRA = locked rotor amps (starting current) LST = leaving source fluid temperature from heat pump LWPD = load heat exchanger water pressure drop M = maximum continuous current PD = pressure drop psi = pressure drop in pounds per square inch P/T = Pressure/Temperature RLA = run load amps T = total cooling capacity in W = Watt 1 US allon = L 1 Btu/h = W SD1025AN 07/12 3 Page of

4 Vertical Dimensional Data Standard filter rails for open return applications Field installed duct flange Deluxe filter rack for ductable return applications A N R S A N Air coil Q Q AESS PANEL B P F AIR OIL SIDE 4 3 FRONT 1.4 in (3.5 cm) Top View - Right Return M M AIR OIL SIDE FRONT 1.4 in (3.5 cm) Top View - Left Return 4 3 P F B 2' (61 cm) Alternate Service Access 2' (61 cm) Service Access Left Return (Right Return opposite side) Isometric View - Left Return U T W Air coil Air coil AESS PANEL AESS PANEL V H E D 1.6 in (4.1 cm) ondensate 3/4 in PV glue socket 1.6 in (4.1 cm) L J supply 1 in (25.4 mm) knockout Low voltage 1/2" (12.7 mm) knockout L K 8 7 ondensate 3/4 in PV glue socket 1.6 in (4.1 cm) E H D 1.6 in (4.1 cm) J L 6 8 AESS PANEL 8 7 K L Front View - Right Return Front View - Left Return Right View - Right Return Left View - Left Return SD1025AN 07/12 4 Page of

5 Vertical Dimensional Data cont. Vertical models overall abinet Electrical Knockouts Water onnections J K L A B D E F H Loop Knockout Width Depth Height* In out HW In HW out ondensate Water FPT HW Provisions 12.7 mm cond 12.7 mm cond Low Voltage Low Voltage 25.4 mm Supply 005 cm mm 22.2 mm cm mm 22.2 mm cm mm 22.2 mm cm mm 22.2 mm cm mm 22.2 mm Vertical models Discharge onnection duct flange installed (±2.54 mm) **Return onnection using deluxe filter rack (±2.54 mm) m N P Q R S T U V W Filter Rack Width Supply Width Supply Depth Return Depth Return Height 005 cm cm cm cm cm ondensate is 3/4 in. PV female glue socket and is switchable from side to front. *Discharge flange is field installed and extends 25.4 mm from top of cabinet. **Vertical units shipped with standard 50.8 mm (field adjustable to 25.4 mm) open application filter rack extending mm from unit and is not suitable for duct connection. For ductable return connection applications, order the deluxe 50.8 mm (field adjustable to 25.4 mm) duct collar/filter rack which extends mm from the unit and is suitable for duct connections. Vertical Disconnect When using disconnect, do not use dimension L from the standard vertical dimensional data. Use dimension LL from the vertical disconnect dimensional data. Vertical models LL 005 Disconnect 36.3 Disconnect Located Location on this Side for a Left Return KK External Dimensions in cm Supply 2.1 in. [5.3 cm] Horizontal Shown in Right Return onfiguration Supply 1.8 in. [4.6 cm] Disconnect Location Alternative Location LL Disconnect Located on this Side for a Right Return Vertical Shown in Left Return onfiguration SD1025AN 07/12 5 Page of

6 Horizontal Dimensional Data Right Return Standard filter rails 1 in. [2.5 cm] knockout 0.5 in. [1.3 cm] knockout Front K 1.7 in. [5.3 cm] P 1.7 in. [5.3 cm] Standard filter rails Front Left Return AP J E AP MP A RR Front View D AP MP ' (61 cm) Service Access J 2' (61 cm) Service Access ondensate "X" PV size End Discharge Deluxe filter rack option shown 2.3 in. [5.8 cm] N P H FILTER RAK AIR OIL SIDE A Right Return End Discharge Side Discharge E D P AP LR Front View Side Discharge A Left Return End Discharge ondensate "X" PV size End Discharge Deluxe filter rack option shown P N BLOWER L OUTLET Legend M AP = Alternate Service Panel M L BP P = Blower Service Panel = ontrol Access Panel BLOWER OUTLET 2.1 in. [5.3 cm] MP = ompressor Service Panel 2.1 in. [5.3 cm] K 0.5 in. [1.3 cm] knockout 1 in. [2.5 cm] knockout FILTER RAK AIR OIL SIDE 2.3 in. [5.8 cm] H P N 1.5 in. [3.8 cm] 1.5 in. [3.8 cm] N P BP L M BLOWER OUTLET Right Return Side Discharge AP MP K 0.5 in. [1.3 cm] knockout Front Front 1 in. [2.5 cm] J knockout 0.5 in. [1.3 cm] K knockout J AP MP Left Return Side Discharge BLOWER OUTLET M L BP Air oil Q S T T S Q FILTER RAK ONNETION R Deluxe filter rack option (shown) R FILTER RAK ONNETION Air oil Front Front B Right Return Side View B Left Return Side View SD1025AN 07/12 6 Page of

7 1. [4.6 ontractor: Horizontal Dimensional Data cont. overall abinet Water onnections Electrical Knockouts Horizontal J K models Loop A B D E H 12.7 mm cond 25.4 mm Water FPT Width Depth Height* In out ondensate Low Voltage Supply 005 cm mm cm mm cm mm cm mm cm mm cm mm Horizontal models Discharge onnection duct flange installed (±2.54mm) Return onnection using deluxe filter rack option (±2.54 mm) Unit Hanger Dimensions L m N P Q R S T U V W X Supply Width Supply Depth Return Depth Return Height PV Size 005 cm cm cm cm cm cm Horizontal units shipped with standard 50.8 mm (field adjustable to 25.4mm) open application filter rack extending mm from unit and is not suitable for duct connection. For ductable return connection applications, order the deluxe 50.8 mm (field adjustable to 25.4 mm) duct collar/filter rack which extends mm from the unit and is suitable for duct connections. Horizontal Disconnect When using disconnect, do not use dimension K from the standard horizontal dimensional data. Use dimension KK from the horizontal disconnect dimensional data. Horizontal models KK Dimensions in cm Disconnect Located on this Side for a Left Return 2.1 in. [5.3 cm] Disconnect Location KK Supply Horizontal Shown in Right Return onfiguration SD1025AN 07/12 7 Page of

8 Hanger Bracket Locations H Right Left B D E ompressor Section Air Handler Section F E D ompressor Section Air Handler Section F A H 3/8 Threaded Rod (not supplied) Vibration Isolator Washer Bolt and Lockwasher Hex Nuts (not supplied) NoTE: Model size 017 will be shipped with six (6) hanger brackets. Only five(5) hanger brackets will be used on the unit. See the above illustration for the fifth hanger bracket location. All other models will use four (4) hanger brackets. Hanger Bracket Dimensions model Hanger Kit Part Number Unit Hanger Dimensions A B D S500A n/a S500A n/a S500A n/a S500A n/a S500A n/a S500A Dimensions are listed in cm. Weight Distribution model Vertical Weight Horizontal Weight Horizontal Weight Distribution Front Back D E F Weights are listed in kg. SD1025AN 07/12 8 Page of

9 Physical Data model ompressor (1 each) Rotary 2-Stage Scroll Scroll Factory harge R-410A, kg Vertical Factory harge R-410A, kg Horizontal Blower Motor & Blower VS EM Variable Speed EM Blower Motor Type/Speeds 5-Spd EM 5-Speed EM VS EM Blower Motor- W 5-Spd EM VS EM 229 x x x x x x 254 Blower Wheel Size (Dia x W), mm 5-Spd EM 229 x x x x x x 254 oax and Water Piping Water onnections Size - FPT - in [mm] 3/4 [19.05] 3/4 [19.05] 1 [25.4] 1 [25.4] 1 [25.4] 1 [25.4] HW onnection Size - Female Sweat I.D. - in [mm] (Vertical Only) 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] oax & Piping Water Volume - l Vertical Air oil Dimensions (H x W), mm 483 x x x x x x 635 Air oil Total Face Area, m Air oil Tube Size, mm Air oil Number of rows Filter Standard - 25mm Pleated MERV 4 Throwaway, mm x x x x x x 914 Filter Standard - 51mm Pleated MERV 13 Throwaway, mm x x x x x x 914 Horizontal Air oil Dimensions (H x W), mm 457 x x x x x x 1143 Air oil Total Face Area, m Air oil Tube Size, mm Air oil Number of rows Filter Standard - 25mm Pleated MERV 4 Throwaway, mm 457 x 356 Filter Standard - 51mm Pleated MERV 13 Throwaway, mm 457 x x x x 32 [457 x 813] x x x x x x x x x x x x x x 559 SD1025AN 07/12 9 Page of

10 Electrical Availability 5-Speed Em Single Speed Dual apacity Voltage /50/ /50/1 w/intellistart /50/ /50/3 w/intellistart Variable Speed Em Single Speed Dual apacity Voltage /50/ /50/1 w/intellistart /50/ /50/3 w/intellistart Electrical Data 5-Speed motor Single Speed Dual apacity model Rated Voltage Voltage min/max ompressor m RLA LRA LRA* Blower motor FLA Total Unit FLA min irc Amp max Fuse/HAR Breaker /50/1 198/ /50/1 198/ /50/3 342/ /50/1 198/ /50/3 342/ / /50/1 198/ /50/3 342/ / /50/1 198/ /50/3 342/ /50/1 198/ /50/3 342/ HAR circuit breaker in USA only *With optional IntelliStart Variable Speed Em motor Single Speed Dual apacity model Rated Voltage Voltage min/max ompressor m RLA LRA LRA* SD1025AN 07/12 10 Page of Blower motor FLA Total Unit FLA min irc Amp max Fuse/HAR Breaker /50/1 198/ /50/1 198/ /50/3 342/ /50/1 198/ /50/3 342/ / /50/1 198/ /50/3 342/ /50/1 198/ /50/3 342/ /50/1 198/ /50/3 342/ HAR circuit breaker in USA only Neutral wire required for variable speed EM motor on V application. *With optional IntelliStart

11 Blower Performance Data 5-Speed Em Blower motor model motor Spd motor Tap High T Stat nct. Blower Size motor Airflow (L/s) at External Static Pressure (Pa) med High 4 W Med x med Low 2 Y Low High 5 W med High 4 Y Med x med Low 2 Y Low High 5 W med High 4 Y med 3 Y1 279 x Med Low Low High 5 W Med High med 3 Y2 279 x med Low 2 Y Low High 5 W med High 4 Y Med x med Low 2 Y Low High 5 W med High 4 Y Med x Med Low Low /26/12 Setting Blower Speed - 5-Speed Em 5-speed EM blower motors have five (5) speeds of which three (3) are selectable on single speed and four (4) are selectable on dual capacity. AUTIoN: Disconnect all power before performing this operation. 5-Speed EM Motor 5-Speed EM Motor onnections - Single Single Speed Speed - Black - Black L - Orange - - Orange reen - reen 5-Speed EM Motor onnections Single Speed High Voltage High Voltage onnections onnections 4.76 mm 4.76 mm L N N - Brown - Brown - Blue - Blue Y1 - Red Y1 - Red Low Voltage Low Voltage onnections 6.35 mm onnections 6.35 mm AUX - ray AUX - ray 5-Speed EM Motor 5-Speed EM Motor onnections Dual - Dual apacity apacity 5-Speed EM Motor onnections Dual apacity L N - Black - Black L - Orange N - Brown - Orange - Brown - reen WaterFurnace works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed - reen without notice. Please contact WaterFurnace at for latest design and - Blue SD1025AN 07/ Blue AUX - ray AUX Page - ray of Y1 - Red Low Voltage Y2 - Tan Y1 - Red Low Voltage Y2 - Tan onnections 6.35 mm onnections 6.35 mm High Voltage High Voltage onnections onnections 4.76 mm 4.76 mm

12 Blower Performance Data cont. Variable Speed Em motor model max ESP (Pa) Blower Size motor x x x x x x Factory settings are at recommended L-M-H DIP switch locations M-H settings MUST be located within boldface L/s range Lowest and Highest DIP switch settings are assumed to be L and H respectively Air flow is controlled within ±5% up to the maximum ESP Max ESP includes allowance for wet coil and 25.4 mm MERV 4 Airflow DIP Switch Settings L m H L m H L m H L m H L m H L m H 6/15/12 Operating Limits Operating Limits ooling ( ) Heating ( ) Air Limits Min. Ambient Air Rated Ambient Air Max. Ambient Air Min. Entering Air Rated Entering Air db/wb 27/ Max. Entering Air db/wb 43/ Water Limits Min. Entering Water Normal Entering Water Max. Entering Water NOTE: Minimum/maximum limits are only for startup conditions, and are meant for bringing the space up to occupancy temperature. Units are not designed to operate at the minimum/maximum conditions on a regular basis. The operating limits are dependent upon three primary factors: 1) water temperature, 2) return air temperature, and 3) ambient temperature. When any of the factors are at the minimum or maximum levels, the other two factors must be at the normal level for proper and reliable unit operation. SD1025AN 07/12 12 Page of

13 orrection Factor Tables Airflow orrections (Dual apacity Part Load) Airflow ooling Heating L/s Per of lg % of Nominal Total ap Sens ap Heat of Rej Htg ap Heat of Ext Airflow orrections (Dual apacity Full Load and Single Speed) Airflow ooling Heating L/s Per of lg % of Nominal Total ap Sens ap Heat of Rej Htg ap Heat of Ext ooling apacity orrections Entering Air WB Total lg ap Sensible ooling apacity multipliers - Entering DB SD1025AN 07/12 13 Page of Input Heat of Rejection * * * * * * * * * * * * * * * * * * * NoTE: * Sensible capacity equals total capacity at conditions shown. Heating orrections Ent Air DB Htg ap Heat of Ext

14 Antifreeze orrections atalog performance can be corrected for antifreeze use. Please use the following table and note the example given. Antifreeze Type Antifreeze % by wt Heating ooling Pressure Load Source Load Source Drop EWT Water Ethylene lycol Propylene lycol Ethanol Methanol WARNIN: ray area represents antifreeze concentrations greater than 35% by weight and should be avoided due to the extreme performance penalty they represent. Antifreeze orrection Example Antifreeze solution is Propylene lycol 20% by weight. Determine the corrected heating and cooling performance at -1.1 and 32.2 respectively as well as pressure drop at -1.1 for an NBK*006-EM. The corrected cooling capacity at 32.2 would be: 6.8 x = 6.59 The corrected heating capacity at -1.1 would be: 4.9 x = 4.47 The corrected pressure drop at -1.1 and 0.5 L/s would be: 29 kpa x = 36.8 kpa SD1025AN 07/12 14 Page of

15 Pressure Drop model L/s Pressure Drop (kpa) Pressure Valve L/s v Drop (kpa) / / / SD1025AN 07/12 15 Page of

16 Performance Data NBK*005 - Single Speed with Variable Speed Em or 5-Speed Em (283 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 16 Page of

17 Performance Data cont. NBK*017 - Single Speed with Variable Speed Em or 5-Speed Em (1038 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 17 Page of

18 Performance Data cont. NBK*006 - Dual apacity with Variable Speed Em or 5-Speed Em Low Speed (354 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 18 Page of

19 Performance Data cont. NBK*006 - Dual apacity with Variable Speed Em or 5-Speed Em High Speed (448 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 19 Page of

20 Performance Data cont. NBK*009 - Dual apacity with Variable Speed Em or 5-Speed Em Low Speed (543 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 20 Page of

21 Performance Data cont. NBK*009 - Dual apacity with Variable Speed Em or 5-Speed Em High Speed (614 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 21 Page of

22 Performance Data cont. NBK*012 - Dual apacity with Variable Speed Em or 5-Speed Em Low Speed (637 L/s) EWT Flow L/s kpa WPD HEATIN - EAT 21.1 oolin - EAT 26.7/19.4 Airflow H LAT HW Airflow HE op T S S/T L/s L/s Ratio HR EER HW SD1025AN 07/12 22 Page of

ARBOR BASE SERIES COMMERCIAL Geothermal/Water Source Heat Pumps Tons. Submittal Data English Language IP/Metric Units SD1201AZA 05/14

ARBOR BASE SERIES COMMERCIAL Geothermal/Water Source Heat Pumps Tons. Submittal Data English Language IP/Metric Units SD1201AZA 05/14 ARBOR BASE SERIES OMMERIAL 0.5-6 Tons Submittal Data English Language IP/Metric Units SD0AZA 05/4 Model Nomenclature -5 6 7 8 9 0 4 5 6 7 8 9 0- Z B V 06 T L 0 0 0 A N A N A 0 SS * Model Type Z Arbor Operation