Aston Series GEOTHERMAL HEAT PUMPS 1 TO 6 TONS. Submittal Data English Language IP/Metric Units SD2500AG 09/15

Transcription

1 EOTHEMAL HEAT PUMPS TO 6 TONS Submittal Data English Language IP/Metric Units SD500A 09/5

2 ontractor: Model Nomenclature * 036 T L A 7 0 Model Type 0 Aston Water-to-Air Type Vertical Horizontal Vintage * - Factory Use Only Unit apacity (MBTUH) 0, 08, 0, 06, 030, 036, 038, 04, 048, 049, 060, 064, 070, 07 Discharge onfiguration T Top (Vertical 0-07) B Bottom (Vertical) ear (Vertical 04-07) E End (Horizontal) S Side (Horizontal) Air onfiguration L Left ight Voltage 08-30/60/ Notes: HW available on IntelliStart available on ontrol option not available with PS motor Future Option 0 - Standard ontrols Option A Aurora TM Base ontrol (AB) B Aurora Advanced ontrols (AXB) Aurora Performance Package (08-07) 3 D Aurora Performance & efrigeration Package (08-07) 3 Air oil Option* 0 Standard, Uncoated - AlumiSeal Filter Option 0 " MEV Filter oax Option opper N upronickel Blower Option 0 PS Variable Speed EM Blower (08-07) High Static Variable Speed EM Blower ( ) 3 High Static PS (0, 030, 036, 04, 048) 4 5-Speed EM (0-07) Hot Water eneration 0 No HW, No IntelliStart HW with Factory Installed Pump, No IntelliStart 3 No HW, IntelliStart 4 HW with Factory Installed Pump, IntelliStart, ev.: 9 June 05D Aluminum Air oil Implementation Models: 0, 08, 0, 06, and 030; Vintage 'H' as of September st, 05 Models: 036, 038, 04, 048, and 049; Vintage 'H' as of November st, 05 Models: 060, 064, 070, and 07; Vintage 'H' as of January st, 06 *Uncoated and AlumiSeal option only available for units with aluminum air coils trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 Page of

3 ontractor: AHI/ISO 356- Performance atings Variable Speed EM or 5-Speed EM Motor AHI/ASHAE/ISO 356- English (IP) Units Model apacity Modulation Flow ate gpm cfm Water Loop Heat Pump round Water Heat Pump round Loop Heat Pump ooling EWT 86 F apacity Btuh EE Btuh/W Heating EWT 68 F apacity Btuh OP ooling EWT 59 F apacity Btuh EE Btuh/W Heating EWT 50 F apacity Btuh ooling Brine Full Load 77 F Part Load 68 F Heating Brine Full Load 3 Part Load 4 ND06 Full , , , , , , ND06 Part , ,000 6., , , , ND038 Full , , , , , , ND038 Part , , , , , , ND049 Full , , , , , , ND049 Part , , , , , , ND064 Full , , , , , , ND064 Part , , , , , , ND07 Full , , , , , , ND07 Part , , , , , , NS08 Single , , , , , , NS0 Single , , , , , , NS030 Single , , , , ,00.0 0, NS036 Single , , , , , , NS04 Single , , , , , , NS048 Single , , , , , , NS060 Single , , , , , , NS070 Single , , , , , , NOTE: 08 not available with 5-Speed EM motor 7/5/05 ooling capacities based upon 80.6 DB, 66. WB entering air temperature Heating capacities based upon 68 DB, 59 WB entering air temperature All ratings based upon 08V operation OP apacity Btuh EE Heating apacity OP trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 3 Page of

4 ontractor: AHI/ISO 356- Performance atings cont. PS Motors AHI/ASHAE/ISO 356- English (IP) Units Model Modulation apacity Flow ate gpm cfm apacity Btuh Water Loop Heat Pump round Water Heat Pump round Loop Heat Pump ooling EWT 86 EE Btuh/W Heating EWT 68 apacity Btuh OP ooling EWT 59 apacity Btuh EE Btuh/W Heating EWT 50 apacity Btuh ooling Brine Full Load 77 Part Load 68 Heating Brine Full Load 3 Part Load 4 NS0 Single NS08 Single NS0 Single NS030 Single NS036 Single NS04 Single NS048 Single NS060 Single NS070 Single ooling capacities based upon 80.6 DB, 66. WB entering air temperature 7/5/05 Heating capacities based upon 68 DB, 59 WB entering air temperature All ratings based upon 08V operation OP apacity Btuh EE Btuh/W apacity Btuh OP trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 4 Page of

5 ontractor: AHI/ISO 356- Performance atings cont. Energy Star ompliance Table Tier 3 Model round Water round Loop 0 P P 08 E, P E, P 0 E, X, P E, X, P 06 E, X E, X 030 E, X, P E, X, P 036 E, X, P E, X, P 038 E, X E, X 04 E, X, P E, X, P 048 E, X, P E, X, P 049 E, X E, X 060 E, X, P E, X, P 064 E, X E, X 070 E, X E, X 07 E, X E, X /9/ E - Unit with Variable Speed EM Blower X - Unit with 5-Speed EM Blower P - Unit with PS Blower Energy Star ating riteria In order for water-source heat pumps to be Energy Star rated they must meet or exceed the minimum efficiency requirements listed below. Tier 3 represents the current minimum efficiency water source heat pumps must have in order to be Energy Start rated. Tier 3: //0 No Effective End Date Published Water-to-Air EE OP round Loop round Water. 4. Water-to-Water round Loop round Water trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 5 Page of

6 ontractor: Vertical Dimensional Data Top Air Discharge LEFT ETUN IHT ETUN Q P O Q L O M L N N TOP TOP.9in [4.8cm] T T.9in [4.8cm] S S KJ I A FONT DEHF ft [6cm] Primary Service Access B LEFT SIDE B IHT SIDE Vertical Top Flow Model Overall abinet Water onnections Electrical onnections I 3/4 in. cond J / in. cond K / in. cond Discharge onnection duct flange installed (±0.0 in) eturn onnection using std deluxe filter rack (±0.0 in) A B D E F H Loop HW L M N O P Q S T Water Sweat Width Depth Height Loop Loop HW HW ond- Power Ext Low Supply Supply eturn eturn In Out In Out ensate FPT (I.D.) Supply Pump Voltage Width Depth Depth Height 0 in in. / in cm Swivel Female in in. / in cm Swivel Female in in. / in cm Swivel Female in in. / in cm Swivel Female in in. / in cm Swivel Female in in. / in cm Swivel Female ondensate is 3/4 in. PV female glue socket and is switchable from side to front 7// Unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit 3.5 in. and is suitable for duct connection. Discharge flange is field installed and extends in. [5.4 mm] from cabinet Decorative molding and/or water connections extend. in. [30.5 mm] beyond front of cabinet. Top auxiliary electric heat power knockouts are.5" and.375". trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 6 Page of

7 ontractor: Vertical Dimensional Data cont. Bottom Air Discharge LEFT ETUN IHT ETUN 4.70 (4.3 cm) 3 S S T T K J I D E F B LEFT SIDE Q B IHT SIDE Q.90 (4.7 cm) 5 L A FONT H ft [6cm] Primary Service Access O N L M N O P LEFT BOTTOM DISHAE FLOO FOOT PINT IHT BOTTOM DISHAE FLOO FOOT PINT Bottom Flow Models Overall abinet Water onnections I 3/4 in. cond Electrical Knockouts J / in. cond K / in. cond Discharge onnection duct flange installed (±0.0 in) eturn onnection using std deluxe filter rack (±0.0 in) A B D E F H Loop HW L M N O P Q S T Power Ext Low HW HW ondensate FPT (I.D.) Width Depth Depth Height Water Sweat Supply Supply eturn eturn Width Depth Height In Out Supply Pump Voltage In Out 0- in in. / in cm Swivel Female in in. / in cm Swivel Female ondensate is 3/4 in. PV female glue socket and is switchable from side to front 7// Vertical bottom flow unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit 3.5 in. and is suitable for duct connection. Decorative molding and/or water connections extend. in. (30.5mm) beyond front of cabinet. Top auxiliary electric heat power knockouts are.5" and.375". trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 7 Page of

8 ontractor: Vertical Dimensional Data cont. ear Air Discharge K J I E H F A FONT D O Q T T Q P M M L S S L N N A B B A EA VIEW LEFT ETUN SIDE VIEW LEFT ETUN SIDE VIEW IHT ETUN EA VIEW IHT ETUN Vertical ear Discharge Models Overall abinet Water onnections Electrical onnections J / in. cond I 3/4 in. cond K / in. cond Discharge onnection duct flange installed (±0.0 in) eturn onnection using std deluxe filter rack (±0.0 in) A B D E F H Loop HW L M N O P Q S T Water Sweat Loop Loop HW HW ond- Power Ext Low Supply Supply eturn eturn Width Depth Height FPT (I.D.) In Out In Out ensate Supply Pump Voltage Width Depth Depth Height 04- in / cm Swivel female in / cm Swivel female ondensate is 3/4 in. PV female glue socket and is switchable from side to front 7// Unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit 3.5 in. and is suitable for duct connection. Discharge flange is field installed and extends in. [5.4mm] from cabinet Decorative molding and/or water connections extend. in. [30.5mm] beyond front of cabinet. Top auxiliary electric heat power knockouts are.5" and.375". trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 8 Page of

9 ontractor: Horizontal Dimensional Data TOP VIEW Q P.in [5.4cm] MOUNT () HANE BAKETS AS SHOWN TO ALLOW AESS TO FILTE ft [6cm] Primary Service Access.9in [4.8cm] FONT VIEW A S SIDE DISHAE VIEW B N O L L END VIEW O S M KJ I D E F AS SHOWN L UNIT ( UNIT ON OPPOSITE SIDE SAME DIMENSIONS) H Electrical onnections J / in. cond Discharge onnection duct flange installed (±0.0 in) eturn onnection using std deluxe filter rack (±0.0 in) Overall abinet Water onnections I K Horizontal 3/4 in. / in. Model A B D E L O P S F H Loop HW cond cond M N Q Width Depth Height In Out HW HW ond- Water Sweat Power Ext Low Supply Supply eturn eturn In Out ensate FPT (I.D.) Supply Pump Voltage Height Depth Depth Height 0 in in. / in cm Swivel Female in in. / in cm Swivel Female in in. / in cm Swivel Female in in. / in SEE SEE cm Swivel Female HAT HAT in in. / in SEE SEE cm Swivel Female HAT HAT in in. / in SEE SEE cm Swivel Female HAT HAT ondensate is 3/4 in. PV female glue socket and is switchable from side to front 7// Unit shipped with deluxe in. (field adjustable to in.) duct collar/filter rack extending from unit 3.5 in. and is suitable for duct connection. Discharge flange is field installed and extends in. [5.4mm] from cabinet Decorative molding and/or water connections extend. in. [30.5mm] beyond front of cabinet. Units Not Shown Above L O ight eturn End Discharge in cm 7..8 ight eturn Side Discharge in cm Left eturn End Discharge in cm Left eturn Side Discharge in cm trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 9 Page of

10 ontractor: Physical Data Single Speed SINLE SPEED Model ompressor ( each) otary Scroll Factory harge 40a, oz [kg] (Aluminum tube and fin air coil) Vertical 36 [.0] 4 [.9] 56 [.58] 64 [.8] 8 [.3] 84 [.38] 9 [.60] [3.7] 34 [3.79] Factory harge 40a, oz [kg] (Aluminum tube and fin air coil) Horizontal 36 [.0] 48 [.36] 54 [.53] 64 [.8] 76 [.5] 84 [.38] 9 [.60] 88 [.49] 0 [3.] Factory harge 40a, oz [kg] (opper tube/aluminum fin air coil) Vertical 4 [.9] 40 [.3] 6 [.76] 80 [.6] 84 [.38] 9 [.60] 00 [.83] 0 [3.40] 50 [4.5] Factory harge 40a, oz [kg] (opper tube/aluminum fin air coil) Horizontal 4 [.9] 40 [.3] 60 [.70] 80 [.6] 84 [.38] 9 [.60] 00 [.83] 0 [3.40] [3.46] Blower Motor & Blower VS EM n/a Variable Speed EM 5-Spd EM n/a n/a 5 Speed EM Blower Motor Type/Speeds PS - PS PS - 3 Speeds 4 Speeds VS EM n/a / [373] / [373] / [373] / [373] / [373] / [373] [746] [746] Blower Motor- hp [W] 5-Spd EM n/a n/a / [373] / [373] / [373] [746] [746] [746] [746] PS /0 [75] /6 [34] /5 [49] /3 [49] / [373] / [373] / [373] [746] [746] High Static Blower Motor - hp [W] VS EM n/a n/a n/a n/a [746] [746] [746] n/a n/a PS n/a n/a / [49] /3 [49] / [373] 3/4 [560] 3/4 [560] n/a n/a VS EM & 9 x 7 9 x 7 9 x 7 x 0 x 0 x 0 x 0 x 0 n/a Blower Wheel Size 5-Spd EM [9 x 78] [9 x 78] [9 x 78] [79 x 54] [79 x 54] [79 x 54] [79 x 54] [79 x 54] (Dia x W), in. [mm] 6 x 8 9 x 7 9 x 7 9 x 7 0 x 0 0 x 0 0 x 0 x 0 x 0 PS [5 x 03] [9 x 78] [9 x 78] [9 x 78] [54 x 54] [54 x 54] [54 x 54] [79 x 54] [79 x 54] x 0 x 0 x 0 VS EM n/a n/a n/a n/a High Static Blower Wheel Size [79 x 54] [79 x 54] [79 x 54] n/a n/a (Dia x W), in. [mm] 9 x 7 9 x 7 0 x 0 0 x 0 0 x 0 PS n/a n/a [9 x 78] [9 x 78] [54 x 54] [54 x 54] [54 x 54] n/a n/a oax and Water Piping Water onnections Size - Swivel - in [mm] [5.4] [5.4] [5.4] [5.4] [5.4] [5.4] [5.4] [5.4] [5.4] HW onnection Size - Female Sweat I.D. - in [mm] n/a / [.7] / [.7] / [.7] / [.7] / [.7] / [.7] / [.7] / [.7] oax & Piping Water Volume - gal [l] 0.35 [.3] 0.40 [.5] 0.7 [.6].0 [3.8].3 [4.9].3 [4.9].6 [6.].6 [6.].3 [8.7] Vertical Air oil Dimensions (H x W), in. [mm] 6 x 6 9 x 0 4 x 0 8 x 0 8 x 5 3 x 5 3 x 5 36 x 5 36 x 5 [406 x 406] [483 x 508] [60 x 54] [7 x 54] [7 x 635] [83 x 635] [83 x 635] [94 x 635] [94 x 635] Air oil Total Face Area, ft [m].8 [0.67].6 [0.4] 3.3 [0.30] 3.9 [0.36] 4.9 [0.45] 5.6 [0.570] 5.6 [0.570] 6.3 [0.64] 6.3 [0.64] Air oil Tube Size, in [mm] 3/8 [9.5] 5/6 [7.9] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] Air oil Number of rows Filter Standard - [5mm] 6 x 0 0 x 4 8 x 4 8 x 4 8 x 30 3 x 30 3 x x x 30 Pleated MEV Throwaway, in [mm] [406 x 508] [508 x 60] [7 x 60] [7 x 60] [7 x 76] [83 x 76] [83 x 76] [94 x 76] [94 x 76] Weight - Operating, lb [kg] 65 [75] 00 [9] 93 [33] 308 [40] 353 [60] 368 [67] 408 [85] 443 [0] 468 [] Weight - Packaged, lb [kg] 85 [84] 0 [00] 33 [4] 38 [49] 373 [69] 388 [76] 48 [94] 463 [0] 488 [] Horizontal Air oil Dimensions (H x W), in. [mm] 6 x 6 8 x 8 x 7 8 x 30 0 x 35 0 x 40 0 x 40 0 x 45 0 x 45 [406 x 406] [457 x 533] [457 x 686] [457 x 76] [508 x 889] [508 x 06] [508 x 06] [508 x 43] [508 x 43] Air oil Total Face Area, ft [m].8 [0.67].6 [0.4] 3.4 [0.36] 3.9 [0.36] 4.9 [0.45] 5.6 [0.570] 5.6 [0.570] 6.3 [0.64] 6.3 [0.64] Air oil Tube Size, in [mm] 3/8 [9.5] 5/6 [7.9] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] Air oil Number of rows x 0-0 x 0-0 x 5-0 x 5 Filter Standard - [5mm] Pleated MEV - 6 x 0-8 x 4-8 x 3-8 x 3-0 x 37 [508 x 508] [508 x 508] [508 x 635] [508 x 635] Throwaway, in [mm] [406 x 508] [457 x 60] [457 x 83] [457 x 83] [686 x 940] - 0 x - 0 x - 0 x - 0 x [508 x 559] [508 x 559] [508 x 559] [508 x 559] Weight - Operating, lb [kg] 65 [75] 00 [9] 300 [36] 35 [43] 368 [67] 403 [83] 48 [90] 453 [05] 478 [7] Weight - Packaged, lb [kg] 85 [84] 0 [00] 30 [45] 335 [5] 388 [76] 43 [9] 438 [99] 473 [5] 498 [6] 7/5/5 trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 0 Page of

11 ontractor: Physical Data cont. Dual apacity DUAL APAITY Model ND06 ND038 ND049 ND064 ND07 ompressor ( each) opeland UltraTech, Dual apacity Scroll Factory harge 40a, oz [kg] (Aluminum tube and fin air coil) Vertical 56 [.58] 70 [.98] 93 [.63] [3.7] 30 [3.68] Factory harge 40a, oz [kg] (Aluminum tube and fin air coil) Horizontal 58 [.64] 76 [.5] 93 [.63] [3.7] 36 [3.85] Factory harge 40a, oz [kg] (opper tube / Aluminum fin air coil) Vertical 60 [.70] 8 [.3] 93 [.63] 8 [3.63] 38 [3.9] Factory harge 40a, oz [kg] (opper tube / Aluminum fin air coil) Horizontal 60 [.70] 8 [.3] 93 [.63] 8 [3.63] 38 [3.9] EM Blower Motor & Blower Blower Motor Type/Speeds VS EM Variable Speed EM 5-Spd EM 5 Speed EM Blower Motor- hp [W] VS EM / [373] / [373] / [373] [746] [746] 5-Spd EM / [373] / [373] [746] [746] [746] High Static Blower Motor - hp [W] VS EM n/a [746] [746] n/a n/a Blower Wheel Size (Dia x W), in. [mm] VS EM 9 x 7 x 0 x 0 x 0 x 0 [9 x 78] [79 x 54] [79 x 54] [79 x 54] [79 x 54] 5-Spd EM 9 x 7 x 0 x 0 x 0 x 0 [9 x 78] [79 x 54] [79 x 54] [79 x 54] [79 x 54] High Static Blower Wheel Size - [Dia. x W], in. [mm] VS EM n/a x 0 x 0 [79 x 54] [79 x 54] n/a n/a oax and Water Piping Water onnections Size - Swivel - in [mm] [5.4] [5.4] [5.4] [5.4] [5.4] HW onnection Size - Female Sweat I.D. - in [mm] / [.7] / [.7] / [.7] / [.7] / [.7] oax & Piping Water Volume - gal [l] 0.7 [.6].3 [4.9].6 [6.].6 [6.].3 [8.7] Vertical Air oil Dimensions (H x W), in. [mm] 4 x 0 8 x 5 3 x 5 36 x 5 36 x 5 [60 x 54] [7 x 635] [83 x 635] [94 x 635] [94 x 635] Air oil Total Face Area, ft [m] 3.3 [0.30] 4.9 [0.45] 5.6 [0.570] 6.3 [0.64] 6.3 [0.64] Air oil Tube Size, in [mm] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] Air oil Number of rows Filter Standard - [5mm] Pleated MEV Throwaway, in [mm] 8 x 4 [7 x 60] 8 x 30 [7 x 76] 3 x 30 [83 x 76] 36 x 30 [94 x 76] 36 x 30 [94 x 76] Weight - Operating, lb [kg] 93 [33] 358 [6] 408 [85] 453 [05] 468 [] Weight - Packaged, lb [kg] 33 [4] 378 [7] 48 [94] 473 [5] 488 [] Horizontal Air oil Dimensions (H x W), in. [mm] 8 x 7 0 x 35 0 x 40 [508 0 x 45 0 x 45 [457 x 686] [508 x 889] x 06] [508 x 43] [508 x 43] Air oil Total Face Area, ft [m] 3.4 [0.36] 4.9 [0.45] 5.6 [0.570] 6.3 [0.64] 6.3 [0.64] Air oil Tube Size, in [mm] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] Air oil Number of rows x 0-0 x 5 [508-0 x 5 [508 Filter Standard - [5mm] Pleated MEV Throwaway, in [mm] - 8 x 3 [457 x 83] - 0 x 37 [686 x 940] [508 x 508] - 0 x [508 x 635] - 0 x [508 x 635] - 0 x [508 x x 559] x 559] 559] Weight - Operating, lb [kg] 300 [36] 368 [67] 48 [90] 463 [0] 480 [8] Weight - Packaged, lb [kg] 30 [45] 388 [76] 438 [99] 483 [9] 500 [7] 7/5/05 trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 Page of

12 ontractor: Auxiliary Heat atings kw Btu/h Model Size ompatibility Model Stages Min cfm 08V 30V 08V 30V EAS(H)4A ,700, EAM(H)5A ,300 6, EAM(H)8A ,400 5, EAM(H)0A ,600 3, EAL(H)0A ,600 3, EAL(H)5A ,900 49,00 50 EAL(H)0A ,00 65, Order the H part number when installed on horizontal and vertical rear discharge units 6//5 Air flow level for auxiliary heat (Aux) must be above the minimum cfm in this table Auxiliary Heat Electrical Data Model Supply Heater Amps Min ircuit Amp Fuse (USA) Fuse (AN) KT BK ircuit 08 V 40 V 08 V 40 V 08 V 40 V 08 V 40 V 08 V 40 V EAS(H)4A Single EAM(H)5A Single EAM(H)8A Single EAM(H)0A Single EAL(H)0A Single Single EAL(H)5A L/L L3/L Single EAL(H)0A L/L L3/L All heaters rated single phase 60 cycle and include unit blower load 6//5 All fuses type D time delay (or HA circuit breaker in USA) Supply wire size to be determined by local codes trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 Page of

13 ontractor: Electrical Data Single Speed Unit with Variable Speed EM Motor Model ated Voltage Voltage Min/Max ompressor M LA LA LA** HW Pump FLA /60/ 87/ N/A /60/ 87/ /60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ /60/ 87/ * With optional hp variable speed EM motor 7/5/3 ** With optional IntelliStart ated voltage of 08/30/60/ All fuses lass K-5 HA circuit breaker in USA only Single Speed Unit with 5-Speed EM Motor Model ated Voltage Voltage Min/Max ompressor M LA LA LA** trademarks of Johnson ontrols, Inc., and are used with permission. HW Pump FLA Ext Loop FLA Ext Loop FLA Blower Motor FLA /60/ 87/ /60/ 87/ /60/ 87/ /60/ 87/ /60/ 87/ /60/ 87/ /60/ 87/ ** With optional IntelliStart 7/5/3 ated voltage of 08/30/60/ All fuses lass K-5 HA circuit breaker in USA only Single Speed Unit with PS Motor Model ated Voltage Voltage Min/Max ompressor M LA LA LA** HW Pump FLA Ext Loop FLA Blower Motor FLA Blower Motor FLA /60/ 87/ N/A /60/ 87/ N/A /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ /60/ 87/ * With optional high static motor 07/5/3 ** With optional IntelliStart ated voltage of 08/30/60/ All fuses lass K-5 HA circuit breaker in USA only SD500A 09/5 3 Page of Total Unit FLA Total Unit FLA Total Unit FLA Min irc Amp Min irc Amp Min irc Amp Max Fuse/ HA Max Fuse/ HA Max Fuse/ HA

14 ontractor: Electrical Data cont. Dual apacity Unit with Variable Speed EM Motor Model ated Voltage Voltage Min/Max ompressor M LA LA LA** HW Pump FLA Ext Loop FLA Blower Motor FLA Total Unit FLA Min irc Amp Max Fuse/ HA /60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ * 08-30/60/ 87/ /60/ 87/ /60/ 87/ * With optional hp variable speed EM motor 9//5 ** With optional IntelliStart ated voltage of 08/30/60/ All fuses lass K-5 HA circuit breaker in USA only Dual apacity Unit with 5-Speed EM Motor Model ated Voltage Voltage Min/Max ompressor M LA LA LA** /60/ 87/ /60/ 87/ /60/ 87/ /60/ 87/ /60/ 87/ ** With optional IntelliStart 9//5 ated voltage of 08/30/60/ All fuses lass K-5 HA circuit breaker in USA only HW Pump FLA Ext Loop FLA Blower Motor FLA Total Unit FLA Min irc Amp Max Fuse/ HA trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 4 Page of

15 ontractor: Blower Performance Data Single Speed Unit with Variable Speed EM Motor Model Max ESP w/hp* w/hp* w/hp* Airflow Speed Settings L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux Factory settings are at recommended -L-H-Aux speed settings L-H settings MUST be located within boldface cfm range Aux is factory setting for auxiliary heat and must be equal to or above the H setting as well as at least the minimum required for the auxiliary heat package may be located anywhere within the airflow table fm is controlled within ±5% up to the maximum ESP Max ESP includes allowance for wet coil and standard filter 6/8/ Dual apacity Unit with Variable Speed EM Motor Model Max ESP w/hp* w/hp* Airflow Switch Settings L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux L H Aux Factory settings are at recommended -L-H-Aux speed settings L-H settings MUST be located within boldface cfm range Aux is factory setting for auxiliary heat and must be equal to or above the H setting as well as at least the minimum required for the auxiliary heat package may be located anywhere within the airflow table fm is controlled within ±5% up to the maximum ESP Max ESP includes allowance for wet coil and standard filter 6/8/ trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 5 Page of

16 ontractor: Blower Performance Data cont. Single Speed Unit with 5-Speed EM Motor Model Motor Motor T stat Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Speed Tap nct. Size HP High 5 W Med High 4 Y Med 3 9 x 7 / Med Low Low High Med High 4 W Med 3 Y 9 x 7 / Med Low Low High 5 W Med High 4 Y Med 3 x 0 / Med Low Low High Med High 4 W Med 3 x Med Low Y Low High Med High 4 W Med 3 Y x Med Low Low High 5 W Med High Med 3 x Med Low Y Low High 5 W Med High 4 Y Med 3 x Med Low Low Factory speed settings are in Bold 6/4/ Air flow values are with dry coil and standard filter For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]). Then for velocities of 00 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.in. wg., and 500 fpm by 0.6 in. wg. Highest setting is for auxiliary heat (W) and lowest setting is for constant blower (). The Y and Y settings must be between the and W settings. The gray wire is not factory wired to the motor and is tied to the wire harness. This wire can be field connected and can be used with 3HT/L thermostats or IntelliZone to deliver the required air flow for the Y signal. trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 6 Page of

17 ontractor: Blower Performance Data cont. Dual apacity Unit with 5-Speed EM Model Motor Motor T stat Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Speed Tap nct. Size HP High 5 W Med High 4 Y Med 3 9 x 7 / Med Low Y Low High 5 W Med High 4 Y Med 3 Y x 0 / Med Low Low High 5 W Med High Med 3 Y x Med Low Y Low High 5 W Med High 4 Y Med 3 x Med Low Y Low High 5 W Med High 4 Y Med 3 x Med Low Y Low Factory speed settings are in Bold 6/4/ Air flow values are with dry coil and standard filter For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]). Then for velocities of 00 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.in. wg., and 500 fpm by 0.6 in. wg. Highest setting is for auxiliary heat (W) and lowest setting is for constant blower (). The Y and Y settings must be between the and W settings. trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 7 Page of

18 ontractor: Blower Performance Data cont. Unit with Standard PS Motor Model Motor Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Spd Size HP H MH* x 8 /0 ML L H M 9 x 7 / L H M 9 x 7 / L H M 9 x 7 / L H M 0 x 0 / L H M 0 x 0 / L H M 0 x 0 / L H M x L H M x L /7/ Unit with Optional High Static PS Motor Model Motor Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Spd Size HP H M 9 x 7 / L H M 9 x 7 / L H M 0 x 0 / L H M 0 x 0 3/ L H M 0 x 0 3/ L Factory settings are in Bold /5/ High-Static option not available for 0, 08, 060, and 070 Air flow values are with dry coil and standard filter For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]). Then for velocities of 00 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.in. wg. and 500 fpm by 0.6 in. wg. trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 8 Page of

19 ontractor: Operating Limits Operating Limits ooling Heating () ( ) () ( ) Air Limits Min. Ambient Air ated Ambient Air Max. Ambient Air Min. Entering Air ated Entering Air db/wb 80.6/66. 7/ Max. Entering Air db/wb 0/83 43/ Water Limits Min. Entering Water Normal Entering Water Max. Entering Water NOTE: Minimum/maximum limits are only for start-up conditions, and are meant for bringing the space up to occupancy temperature. Units are not designed to operate at the minimum/maximum conditions on a regular basis. The operating limits are dependent upon three primary factors: ) water temperature, ) return air temperature, and 3) ambient temperature. When any of the factors are at the minimum or maximum levels, the other two factors must be at the normal level for proper and reliable unit operation. Definitions Abbreviations and Definitions cfm = airflow, cubic feet/minute EWT = entering water temperature, Fahrenheit gpm = water flow in gallons/minute WPD = water pressure drop, psi and feet of water EAT = entering air temperature, Fahrenheit (dry bulb/wet bulb) H = air heating capacity, MBtu/h T = total cooling capacity, MBtu/h S = sensible cooling capacity, MBtu/h kw = total power unit input, kilowatts H = total heat of rejection, MBtu/h HE = total heat of extraction, MBtu/h HW = hot water generator capacity, MBtu/h EE = Energy Efficient atio = Btu output/watt input OP = oefficient of Performance = Btu output/btu input LWT = leaving water temperature, LAT = leaving air temperature, TH = total heating capacity, MBtu/h L = latent cooling capacity, MBtu/h S/T = sensible to total cooling ratio eference alculations Heating alculations: HE LWT = EWT - gpm x 500 ooling alculations: H LWT = EWT + gpm x 500 LAT = EAT + H cfm x.08 LAT (DB) = EAT (DB) - S cfm x.08 L = T - S TH = H + HW S/T = S T Notes to Performance Data Tables The following notes apply to all performance data tables: Performance ratings are based on 80 DB/67 WB EAT for cooling and 70 DB EAT for heating. Three flow rates are shown for each unit. The lowest flow rate shown is used for geothermal open loop/well water systems with a minimum of 50 EWT. The middle flow rate shown is the minimum geothermal closed loop flow rate. The highest flow rate shown is optimum for geothermal closed loop systems and the suggested flow rate for boiler/tower applications. The hot water generator numbers are based on a flow rate of 0.4 gpm/ton of rated capacity with an EWT of 90. Entering water temperatures below 40 assumes 5% antifreeze solution. For non-standard EAT conditions, apply the appropriate orrection Factor tables. Interpolation between EWT, gpm, and cfm data is permissible, extrapolation is not. trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 9 Page of

20 ontractor: orrection Factor Tables Air Flow orrections (Dual apacity Part Load) Airflow ooling Heating cfm Per Ton of lg % of Nominal Total ap Sens ap Power Heat of ej Htg ap Power Heat of Ext /30/06 Air Flow orrections (Dual apacity Full Load and Single Speed) Airflow ooling Heating cfm Per Ton of lg % of Nominal Total ap Sens ap Power Heat of ej Htg ap Power Heat of Ext /30/06 ooling apacity orrections Entering Total Sensible ooling apacity Multipliers - Entering DB Power Heat of Air WB lg ap Input ejection * * * * * * * * * * * * * * * * * * * * * * NOTE: * Sensible capacity equals total capacity at conditions shown. 3/8/ Heating apacity orrections Ent Air DB Heating orrections Htg ap Power Heat of Ext /0/09 trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 0 Page of

21 ontractor: Antifreeze orrections atalog performance can be corrected for antifreeze use. Please use the following table and note the example given. Antifreeze Type Antifreeze % by wt Heating ooling Pressure Drop EWT - [ ] 30 [-.] 90 [3.] 30 [-.] Water Ethylene lycol Propylene lycol Ethanol Methanol WANIN: ray area represents antifreeze concentrations greater than 35% by weight and should be avoided due to the extreme performance penalty they represent. Antifreeze orrection Example Antifreeze solution is Propylene lycol 0% by weight. Determine the corrected heating and cooling performance at 30 and 90 respectively as well as pressure drop at 30 for a Single Speed Model 0-EM. The corrected cooling capacity at 90 would be:,400 MBtu/h x =,706 MBtu/h The corrected heating capacity at 30 would be: 4,500 MBtu/h x 0.93 = 3,39 MBtu/h The corrected pressure drop at 30 and 6 gpm would be: 6.6 feet of head x.70 = 8.38 feet of head trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 Page of

22 ontractor: Pressure Drop Single Speed Pressure Drop (psi) Model gpm /7/ Dual apacity Model 06 full load 06 part load 038 full load 038 part load 049 full load 049 part load 064 full load 064 part load 07 full load 07 part load Pressure Drop (psi) gpm /6/ trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 Page of

23 ontractor: Performance Data Model 0 - Single Speed PS (400 cfm) EWT Flow ate PM PSI FT/HD WPD Heating - EAT 70 ooling - EAT 80/67 H Power HE LAT T S S/T Power OP MBtu/h kw MBtu/h MBtu/h MBtu/h atio kw H MBtu/h //0 EE trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 3 Page of

24 ontractor: Performance Data cont. Model 08 - Single Speed PS (600 cfm) EWT Flow WPD Heating - EAT 70 ooling - EAT 80/67 ate H Power HE LAT HW T S S/T Power H PSI FT/HD OP PM MBtu/h kw MBtu/h MBtu/h MBtu/h MBtu/h atio kw MBtu/h EE HW MBtu/h //0 trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 4 Page of

25 ontractor: Performance Data cont. Model 0 - Single Speed PS (700 cfm) EWT Flow WPD HEATIN - EAT 70 OOLIN - EAT 80/67 ate H Power HE LAT HW T S S/T Power H PSI FT/HD OP PM kw MBtu/h atio kw EE HW MBtu/h /0/ trademarks of Johnson ontrols, Inc., and are used with permission. SD500A 09/5 5 Page of