Heating and Air Conditioning

Size: px

Start display at page:

Download "Heating and Air Conditioning"

Job O’Brien’
5 years ago
Views:

Heating and Air Conditioning SUBMITTAL SET LX ULTRA

improvement, specifications are subject to change

1 Heating and Air Conditioning SUBMITTAL SET LX ULTRA COMMERCIAL GEOTHERMAL/ WATER SOURCE HEAT PUMPS SINGLE CAPACITY MODELS: YGS (.75 THRU 6 NOMINAL TONS) Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at Additional rating information can found at FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

2 Model Nomenclature YG S V 036 T L C A N 16 N 17 A N SS 24 * Model Type YG YG Series Operation Range S Single Stage Cabinet Configuration V Vertical H - Horizontal Unit Capacity (MBTUH) 009, 012, 015, 018, 023 (Horizontal Only) 024, 030, 036, 041 (Vertical Only) 042, 048, 060, 070 Discharge Configuration T Top (Vertical) E End (Horizontal) S Side (Horizontal) Return Air Configuration L Left R Right Voltage /60/ /60/1 ( ) /60/3 ( ) 4 460/60/3 ( ) 5 575/60/3 (PSC Only ) Hot Water Generation Option 0 No HWG, No GeoStart 2 HWG without Pump, No GeoStart (V ) 3 No HWG, GeoStart 5 HWG without Pump, GeoStart Blower Options 0 PSC Blower 1 Variable Speed ECM Blower ( ) 2 High Static Variable Speed ECM Blower ( ) 3 High Static PSC Blower (024, 030, 042, 048) 4 5-Speed ECM Blower ( ) Water Coil Option C Copper N CuproNickel Sound Kit Option A None B Sound Kit (Not Available on H ) Vintage * - Factory Use Only Non-Standard Options SS Standard Drain Pan Option 0 Composite, No Secondary Connection 1 Composite, Secondary Connection 2 Stainless Steel, No Secondary Connection 3 Stainless Steel, Secondary Connection Cabinet Option 0 Unpainted, 1 in MERV 4, Filter Rail 1 Painted, 1 in MERV 4, Filter Rail 2 Unpainted, 2 in MERV 13, Filter Rail 3 Painted, 2 in MERV 13, Filter Rail 4 Unpainted, 1 in MERV 4, Filter Rack 5 Painted, 1 in MERV 4, Filter Rack 6 Unpainted, 2 in MERV 13, Filter Rack 7 Painted, 2 in MERV 13, Filter Rack Phase Guard N No Phase Guard, No Disconnect P Phase Guard, No Disconnect B Phase Guard, Disconnect D No Phase Guard, Disconnect All-Aluminum Air Coil Option 5 AlumiSeal TM, Extended Range 6 AlumiSeal, Standard Range 7 No Coating, Extended Range 8 No Coating, Standard Range Control Option A Aurora TM Base Control (ABC) Water Control Option N None R Water Flow Regulator ( ) V 2-Way Valve ( ) B 2-Way Valve w/ Water Flow Regulator ( ) Refrigeration Option 0 None G Hot Gas Bypass ( ) R Hot Gas Reheat ( ) B Hot Gas Bypass w/hot Gas Reheat ( ) Rev.: 29 October 2013D Note: Phase Guard Only Available on /60/3, 460/60/3, and 575/60/3 50VA Transformer with Aurora SD1200AK6 10/13 2 Page of

3 AHRI Data PSC Motor AHRI/ASHRAE/ISO English (IP) Units Model Flow Rate cfm Water Loop Heat Pump Ground Water Heat Pump Ground Loop Heat Pump Cooling EWT 86 Capacity Btu/h Btu/h/W Heating EWT 68 Capacity Btu/h Cooling EWT 59 Capacity Btu/h Btu/h/W Heating EWT 50 Capacity Btu/h Cooling EWT 77 Capacity Btu/h Btu/h/W Heating EWT 32 Capacity Btu/h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cooling capacities based upon 80.6 DB, 66.2 WB entering air temperature 12/6/10 Heating capacities based upon 68 DB, 59 WB entering air temperature All ratings based upon 208V operation Variable Speed ECM, or 5-Speed ECM Motor AHRI/ASHRAE/ISO English (IP) Units Model Flow Rate cfm Water Loop Heat Pump Ground Water Heat Pump Ground Loop Heat Pump Cooling EWT 86 Capacity Btu/h Btu/h/W Heating EWT 68 Capacity Btu/h Cooling EWT 59 Capacity Btu/h Btu/h/W Heating EWT 50 Capacity Btu/h Cooling EWT 77 Capacity Btu/h Btu/h/W Heating EWT 32 Capacity Btu/h , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Cooling capacities based upon 80.6 DB, 66.2 WB entering air temperature 12/6/10 Heating capacities based upon 68 DB, 59 WB entering air temperature All ratings based upon 208V operation All product is safety listed under UL1995 thru ETL and performance listed with AHRI in accordance with standard SD1200AK6 10/13 3 Page of

4 Vertical Dimensional Data Standard filter rails for open return applications Field installed duct flange Deluxe filter rack for ductable return applications A N R S A N Air coil Q Q ACCESS PANEL B P G F AIR COIL SIDE 4 3 FRONT 1.4 in (3.5 cm) Top View - Right Return M M AIR COIL SIDE FRONT 1.4 in (3.5 cm) Top View - Left Return 4 3 P G F B 2' (61 cm) Alternate Service Access 2' (61 cm) Service Access Left Return (Right Return opposite side) Isometric View - Left Return U T W Air coil Air coil ACCESS PANEL ACCESS PANEL V C H E D 1.6 in (4.1 cm) Condensate 3/4 in PVC glue socket 1.6 in (4.1 cm) L J supply 1 in (25.4 mm) knockout Low voltage 1/2" (12.7 mm) knockout L K 8 7 Condensate 3/4 in PVC glue socket 1.6 in (4.1 cm) E H D C 1.6 in (4.1 cm) J L 6 8 ACCESS PANEL 8 7 K L Front View - Right Return Front View - Left Return Right View - Right Return Left View - Left Return SD1200AK6 10/13 4 Page of

5 Vertical Dimensional Data cont. Overall Cabinet Water Connections Electrical Knockouts Vertical Knockout A B C D E F G H Loop Models J K L Width Depth Height** In Out HWG Cond- Water HWG Provisions cond cond cond 1/2 in. 1/2 in. 1 in. HWG Out In ensate FPT in N/A N/A 8.8 1/2 N/A cm N/A N/A mm N/A in / cm mm 22.2 mm in / cm mm 22.2 mm in / cm mm 22.2 mm in / cm mm 22.2 mm in cm mm 22.2 mm in cm mm 22.2 mm in cm mm 22.2 mm Discharge Connection Return Connection* duct flange installed (±0.10 in) using deluxe filter rack (±0.10 in) Vertical M N P Q R S T U V Models Filter Rack Supply Supply Return Return W Width Width Depth Depth Height in cm in cm in cm in cm in cm in cm in cm in cm Condensate is 3/4 in. PVC female glue socket and is switchable from side to front. 11/10/09 *Dimensions for return connections are for the deluxe filter rack that is suitable for ducted return applications and extends 3.25 in. [8.26 cm] from the unit. The open filter rack, used in non-ducted returns, extends 2.2 in. [5.59 cm] from the unit. **Discharge fl ange is fi eld installed and extends 1 in. (25.4 mm) from top of cabinet. Vertical Disconnect When using disconnect, do not use dimension L from the standard vertical dimensional data. Use dimension LL from the vertical disconnect dimensional data. Vertical Models LL Externally Mounted [47.8] [36.3] [38.9] [36.3] [36.3] [36.3] Dimensions in inches [cm] 02/06/13 Supply 1.8 in. [4.6 cm] Disconnect Location LL Alternative Location Disconnect Located on this Side for a Right Return Vertical Shown in Left Return Configuration SD1200AK6 10/13 5 Page of

6 Horizontal Dimensional Data Right Return Standard filter rails 1 in. [2.5 cm] knockout 0.5 in. [1.3 cm] knockout Front K 1.7 in. [5.3 cm] CP 1.7 in. [5.3 cm] Standard filter rails Front Left Return AP J E AP CMP A RR Front View D AP CMP ' (61 cm) Service Access J 2' (61 cm) Service Access Condensate "X" PVC size End Discharge Deluxe filter rack option shown 2.3 in. [5.8 cm] N P H FILTER RACK AIR COIL SIDE BLOWER OUTLET A Right Return End Discharge Side Discharge E D CP AP LR Front View Side Discharge Legend M C AP = Alternate Service Panel C M L BP CP = Blower Service Panel = Control Access Panel BLOWER OUTLET 2.1 in. [5.3 cm] CMP = Compressor Service Panel 2.1 in. [5.3 cm] A K 0.5 in. [1.3 cm] knockout 1 in. [2.5 cm] knockout L Left Return End Discharge Condensate "X" PVC size End Discharge Deluxe filter rack option shown P N 2.3 in. [5.8 cm] FILTER RACK AIR COIL SIDE H P N 1.5 in. [3.8 cm] 1.5 in. [3.8 cm] N P BP L M BLOWER OUTLET Right Return Side Discharge AP CMP K 0.5 in. [1.3 cm] J knockout Front Front 1 in. [2.5 cm] J knockout 0.5 in. [1.3 cm] K knockout AP CMP Left Return Side Discharge BLOWER OUTLET M L BP Air Coil C Q S T T S Q FILTER RACK CONNECTION R Deluxe filter rack option (shown) C R FILTER RACK CONNECTION Air Coil Front Front B Right Return Side View B Left Return Side View SD1200AK6 10/13 6 Page of

7 Horizontal Dimensional Data cont. Horizontal Models Overall Cabinet Water Connections Electrical Knockouts J K A B C D E H Loop 1/2 in. cond 1 in. cond Width Depth Height* In Out Condensate Water FPT Low Voltage in / cm mm Supply in / cm mm in / cm mm in / cm mm in cm mm in cm mm in cm mm Horizontal Models Discharge Connection Return Connection* duct flange installed (±0.10 in) using deluxe filter rack option (±0.10 in) PVC Size L M N P Q R S T X Supply Width Supply Depth Return Depth Return Height in /2 cm in /4 cm in /4 cm in /4 cm in /4 cm in /4 cm in /4 070 cm /29/13 *Dimensions for return connections are for the deluxe filter rack that is suitable for ducted return applications and extends 3.25 in. [8.26 cm] from the unit. The open filter rack, used in non-ducted returns, extends 2.2 in. [5.59 cm] from the unit. Condensate 3/4 in. PVC stub extends from cabinet approximately 1-1/2 in. [38.1 mm] Horizontal Disconnect When using disconnect, do not use dimension K from the standard horizontal dimensional data. Use dimension KK from the horizontal disconnect dimensional data. Horizontal Models KK Externally Mounted [20.8 ] [23.4] [23.4] [28.4] [25.9] [28.4] Dimensions in inches [cm] 02/06/13 Disconnect Located on this Side for a Left Return 2.1 in. [5.3 cm] Disconnect Location KK Supply Horizontal Shown in Right Return Configuration SD1200AK6 10/13 7 Page of

8 Hanger Bracket Locations Right Left B D E Compressor Section Air Handler Section F G C E D Compressor Section Air Handler Section G F A 3/8 Threaded Rod (not supplied) Vibration Isolator Washer Bolt and Lockwasher Hex Nuts (not supplied) Hanger Dimensions Model Hanger Kit Part Number Unit Hanger Dimensions A B C in. 99S500A04 cm [80.5] [55.4] [46.0] in S500A04 cm [108.6] [63.8] [54.4] in S500A04 cm [108.7] [63.8] [54.4] in S500A04 cm [116.3] [63.8] [54.4] in S500A04 cm [124.0] [71.4] [62.0] in S500A04 cm [136.7] [71.4] [62.0] in S500A04 cm [157.0] [71.4] [62.0] 10/29/13 Weight Distribution Model Vertical Shipping Weight Horizontal Shipping Weight Horizontal Weight Distribution Front Back D E F G lb kg [50] [54] [21] [11] [12] [11] lb kg [52] [57] [22] [11] [12] [12] lb kg [75] [79] [31] [15] [17] [17] lb kg [77] [82] [31] [16] [17] [17] lb. na kg na [84] [32] [16] [18] [17] lb kg [104] [111] [43] [22] [24] [23] lb kg [109] [116] [44] [22] [25] [24] lb kg [120] [129] [50] [25] [28] [27] lb. 275 na na na na na kg [125] na na na na na lb kg [129] [136] [52] [26] [29] [28] lb kg [132] [141] [54] [27] [30] [29] lb kg [152] [163] [63] [32] [35] [34] lb kg [172] [184] [71] [36] [39] [38] 11/10/09 SD1200AK6 10/13 8 Page of

9 Physical Data Single Speed Model Compressor (1 each) Rotary Scroll Factory Charge R-410A, oz [kg] Vertical 26 [0.74] 32 [0.91] 38 [1.08] 40 [1.13] n/a 46 [1.30] 54 [1.53] 56 [1.59] 54 [1.53] 68 [1.93] 76 [2.15] 88 [2.49] 92 [2.61] Factory Charge R-410A, oz [kg] Horizontal 24 [0.68] 26 [0.74] 38 [1.08] 40 [1.13] 46 [1.30] 46 [1.30] 56 [1.59] 60 [1.70] n/a 68 [1.93] 76 [2.15] 88 [2.49] 88 [2.49] Blower Motor & Blower Blower Motor Type/Speeds Blower Motor- hp [W] Optional - Oversized Blower Motor - hp [W] Blower Wheel Size (Dia x W), in. [mm] VS ECM Not Available Variable Speed PSC 4 Speeds 3 Speeds 5-Spd ECM Not Available 5 Speeds VS Not Available 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1 [746] 1 [746] ECM PSC 1/10 [75] 1/10 [75] 1/6 [134] 1/6 [134] 1/5 [149] 1/5 [149] 1/3 [249] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1 [746] 1 [746] 5-Spd Not Available 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1 [746] 1 [746] 1 [746] 1 [746] 1 [746] ECM VS Not Available 1 [746] 1 [746] Not Available ECM PSC Not Available 1/3 [249] 1/2 [373] Not Available 3/4 [560] 3/4 [560] Not Available VS ECM PSC 5-Spd ECM Not Available 6 x 8 [152 x 203] 6 x 8 [152 x 203] Not Available 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 9 x 7 [229 x 178] 10 x 10 [254 x 254] 10 x 10 [254 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 10 x 10 [254 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 10 x 10 [254 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] 11 x 10 [279 x 254] Coax and Water Piping Water Connection Size - FPT - in. [mm] 1/2 [12.7] 1/2 [12.7] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 1 [25.4] 1 [25.4] 1 [25.4] 1 [25.4] HWG Connection Size - FPT - in. [mm] (Vertical Only) Not Available 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] Coax & Piping Water Volume - gal [l] 0.26 [0.98] 0.3 [1.12] 0.4 [1.49] 0.4 [1.49] 0.4 [1.49] 0.4 [1.49] 0.75 [2.83] 0.9 [3.41] 0.9 [3.41] 0.9 [3.41] 1.25 [4.72] 1.5 [5.68] 1.5 [5.68] Vertical Air Coil Dimensions (H x W), in. [mm] 12 x 16 [305 x 406] 12 x 16 [305 x 406] 22 x 16 [559 x 406] 22 x 16 [559 x 406] n/a 24 x 20 [610 x 508] 24 x 20 [610 x 508] 28 x 20 [711 x 508] 28 x 20 [711 x 508] 28 x 25 [711 x 635] 28 x 25 [711 x 635] 32 x 25 [813 x 635] 36 x 25 [914 x 635] Air Coil Total Face Area, ft 2 [m 2 ] 1.3 [0.121] 1.3 [0.121] 2.4 [0.220] 2.4 [0.220] n/a 3.3 [0.310] 3.3 [0.310] 3.9 [0.362] 3.9 [0.362] 4.9 [0.452] 4.9 [0.452] 5.6 [0.516] 6.3 [0.581] Air Coil Tube Size, in. [mm] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] n/a 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] Air Coil Number of rows n/a Filter Standard - 1 in. [25mm] MERV4 Throwaway, in. [mm] Filter Standard - 2 in. [51mm] Pleated MERV13 Throwaway, in. [mm] Horizontal Air Coil Dimensions (H x W), in. [mm] 12 x 20 [305 x 508] 12 x 20 [305 x 508] 10 x 16 [254 x 406] 12 x 20 [305 x 508] 12 x 20 [305 x 508] 10 x 16 [254 x 406] 22 x 20 [559 x 508] 22 x 20 [559 x 508] 16 x 23 [406 x 584] 22 x 20 [559 x 508] 22 x 20 [559 x 508] 16 x 23 [406 x 584] n/a n/a 16 x 23 [406 x 584] 24 x 24 [610 x 610] 24 x 24 [610 x 610] 18 x 27 [457 x 686] 24 x 24 [610 x 610] 24 x 24 [610 x 610] 18 x 27 [457 x 686] 28 x 24 [711 x 610] 28 x 24 [711 x 610] 18 x 30 [457 x 762] 28 x 24 [711 x 610] 28 x 24 [711 x 610] n/a 28 x 30 [711 x 762] 28 x 30 [711 x 762] 20 x 35 [508 x 889] 28 x 30 [711 x 762] 28 x 30 [711 x 762] 20 x 35 [508 x 889] 32 x 30 [813 x 762] 32 x 30 [813 x 762] 20 x 40 [508 x 1016] 36 x 30 [914 x 762] 36 x 30 [914 x 762] 20 x 45 [508 x 1143] Air Coil Total Face Area, ft 2 [m 2 ] 1.1 [0.103] 1.1 [0.103] 2.6 [0.238] 2.6 [0.238] 2.6 [0.238] 3.4 [0.316] 3.4 [0.316] 3.9 [0.362] n/a 4.9 [0.452] 4.9 [0.452] 5.6 [0.516] 6.3 [0.581] Air Coil Tube Size, in. [mm] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] n/a 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] Air Coil Number of rows n/a Filter Standard - 1 in. [25mm] MERV 4 Throwaway, in. [mm] Filter Standard - 2 in. [51mm] Pleated MERV 13 Throwaway, in. [mm] 11 x 17 [279 x 432] 11 x 17 [279 x 432] 11 x 17 [279 x 432] 11 x 17 [279 x 432] 16 x 25 [406 x 635] 16 x 25 [406 x 635] 16 x 25 [406 x 635] 16 x 25 [406 x 635] 16 x 25 [406 x 635] 16 x 25 [406 x 635] 2-18 x 14 [457 x 356] 18 x 29 [457 x 737] 2-18 x 14 [457 x 356] 18 x 29 [457 x 737] 1-18 x 14 [457 x 356] 1-18 x 18 [457 x 457] 18 x 32 [457 x 813] n/a n/a 2-18 x 20 [457 x 508] 20 x 37 [686 x 940] 2-18 x 20 [457 x 508] 20 x 37 [686 x 940] 1-20 x 20 [508 x 508] 1-20 x 22 [508 x 559] 1-20 x 20 [508 x 508] 1-20 x 22 [508 x 559] 1-20 x 25 [508 x 635] 1-20 x 22 [508 x 559] 1-20 x 25 [508 x 635] 1-20 x 22 [508 x 559] 10/23/13 SD1200AK6 10/13 9 Page of

10 Electrical Availability PSC Static Single Speed Models Voltage Option /60/ /60/1 w/geostart /60/1 Standard /60/3 (also w/geostart) 460/60/3 (also w/geostart) 575/60/ /60/ /60/1 w/geostart /60/1 High /60/3 (also w/geostart) 460/60/3 (also w/geostart) 575/60/3 01/22/13 Variable Speed ECM Static Single Speed Models Voltage Option /60/ /60/1 w/geostart /60/1 Standard /60/3 (also w/geostart) 460/60/3 (also w/geostart) 575/60/ /60/ /60/1 w/geostart /60/1 High /60/3 (also w/geostart) 460/60/3 (also w/geostart) 575/60/3 01/22/13 5-Speed ECM Static Single Speed Models Voltage Option /60/ /60/1 w/geostart /60/1 Standard /60/3 (also w/geostart) 460/60/3 (also w/geostart) 575/60/3 01/22/13 SD1200AK6 10/13 10 Page of

11 Electrical Data PSC Motor Model Rated Voltage Voltage Min/Max Compressor MCC RLA LRA LRA** /60/1 187/ n/a /15 265/60/1 238/ n/a / /60/1 187/ n/a /15 265/60/1 238/ n/a / /60/1 187/ n/a /15 265/60/1 238/ n/a / /60/1 187/ /60/1 238/ n/a / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ * 265/60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ * 265/60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/3 517/ n/a / /60/1 187/ /60/3 187/ /60/3 414/ /60/3 517/ n/a / /60/1 187/ * /60/3 187/ /60/3 414/ /60/3 517/ n/a / /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ * /60/3 187/ /60/3 414/ /60/3 517/ n/a /60/1 187/ /60/3 187/ /60/3 414/ /60/3 517/ n/a /60/1 187/ /60/3 187/ /60/3 414/ /60/3 517/ n/a HACR circuit breaker in USA only * With optional high-static PSC motor ** With optional GeoStart TM 05/21/13 NOTE: High-static option not available on all model sizes. SD1200AK6 10/13 11 Page of Blower Motor FLA Total Unit FLA Min Circ Amp Max Fuse/ HACR

12 Electrical Data cont. 5-Speed ECM Motor Model Rated Voltage Voltage Min/Max Compressor MCC RLA LRA LRA** Blower Motor FLA /60/1 187/ n/a /60/1 238/ n/a / /60/1 187/ /60/1 238/ n/a /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ HACR circuit breaker in USA only 05/21/13 ** With optional GeoStart TM Total Unit FLA Min Circ Amp Max Fuse/ HACR SD1200AK6 10/13 12 Page of

13 Electrical Data cont. Variable Speed ECM Motor Model Rated Voltage Voltage Min/Max Compressor MCC RLA LRA LRA** Blower Motor FLA Total Unit FLA Min Circ Amp Max Fuse/ HACR /60/1 187/ n/a /60/1 238/ n/a /60/1 187/ /60/1 238/ n/a /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ / /60/1 187/ /60/1 238/ n/a /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ * /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ * /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ /60/1 187/ /60/3 187/ /60/3 414/ HACR circuit breaker in USA only 05/21/13 * With optional 1 HP ECM motor ** With optional GeoStart TM CAUTION: When installing a unit with a variable speed ECM blower motor in 460/60/3 voltage, a neutral wire is required to allow proper unit operation. SD1200AK6 10/13 13 Page of

14 Blower Performance Data Standard PSC Motor Model Blower Blower Motor Airflow (cfm) at External Static Pressure (in. wg) Spd Size hp H MH x 8 1/10 ML* L H MH* x 8 1/10 ML L H M 9 x 7 1/ L H M 9 x 7 1/ L H M 9 x 7 1/ L H M 9 x 7 1/ L H M 9 x 7 1/ L H M 9 x 7 1/ L H M 10x10 1/ L H M 10 x 10 1/ L H M 10 x 10 1/ L H M 11 x L H M 11 x L Factory settings are in Bold 7/6/10 Airfl ow values are with dry coil and standard fi lter For wet coil performance fi rst calculate the face velocity of the air coil (Face Velocity [fpm] = Airfl ow [cfm] / Face Area [sq ft]). Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg. and 500 fpm by 0.16 in. wg. Optional High Static PSC Motor Model Blower Spd Blower Size Motor hp Airflow (cfm) at External Static Pressure (in. wg) H M 9 x 7 1/ L H M 9 x 7 1/ L H M 10 x 10 3/ L H M 10 x 10 3/ L Factory settings are in Bold 7/6/10 Airfl ow values are with dry coil and standard fi lter For wet coil performance fi rst calculate the face velocity of the air coil (Face Velocity [fpm] = Airfl ow [cfm] / Face Area [sq ft]). Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg. and 500 fpm by 0.16 in. wg. * Setting for 265 V operation. SD1200AK6 10/13 14 Page of

Blower Performance Data cont. 5-Speed ECM Motor Model Motor Speed Motor Tap Blower Size Motor HP Airflow (cfm) at External Static Pressure (in. wg) 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.

15 Blower Performance Data cont. 5-Speed ECM Motor Model Motor Speed Motor Tap Blower Size Motor HP Airflow (cfm) at External Static Pressure (in. wg) High Med High Med 3 9 x 7 1/ Med Low Low High Med High Med 3 9 x 7 1/ Med Low Low High Med High Med 3 9 x 7 1/ Med Low Low High Med High Med 3 9 x 7 1/ Med Low Low High Med High Med 3 9 x 7 1/ Med Low Low High Med High Med 3 9 x 7 1/ Med Low Low High Med High Med 3 11 x Med Low Low High Med High Med 3 11 x Med Low Low High Med High Med 3 11 x Med Low Low High Med High Med 3 11 x Med Low Low High Med High Med 3 11 x Med Low Low Factory settings are in Bold 01/23/13 Airfl ow values are with dry coil and standard 1 in. fi lter ISO/AHRI rating point on the US*070 will require moving the red wire on the motor to high speed (tap 5) and disconnecting the tan wire from tap 5. Setting Blower Speed - 5-Speed ECM 5-speed ECM blower motors have fi ve (5) speeds of which three (3) are selectable on single speed and four (4) are selectable on dual capacity. 5-Speed ECM Motor Connections CAUTION: Disconnect all power before performing this operation. SD1200AK6 10/13 15 Page of

16 Blower Performance Data cont. Variable Speed ECM Motor Model Max Airflow DIP Switch Settings esp L M H L M H L M H L M H L M H L M H L M H L M H w/1hp* L M H L M H w/1hp* L M H L M H L M H Factory settings are at recommended L-M-H DIP switch locations. 11/10/09 Shaded regions are recommended for best performance. It is acceptable to operate outside of this area as long as the WSHP operates within the guidlines of the Operating Limits table and Correction Factor tables. Lowest and Highest DIP switch settings are assumed to be L and H respectively. CFM is controlled within ±5% up to the maximum esp. Max esp includes allowance for wet coil and standard fi lter SD1200AK6 10/13 16 Page of

17 Operating Limits Operating Limits Cooling Heating () ( C) () ( C) Air Limits Min. Ambient Air Rated Ambient Air Max. Ambient Air Min. Entering Air Rated Entering Air db/wb 80.6/ / Max. Entering Air db/wb 110/83 43/ Water Limits Min. Entering Water Normal Entering Water Max. Entering Water NOTE: Minimum/maximum limits are only for start-up conditions, and are meant for bringing the space up to occupancy temperature. Units are not designed to operate at the minimum/maximum conditions on a regular basis. The operating limits are dependant upon three primary factors: 1) water temperature, 2) return air temperature, and 3) ambient temperature. When any of the factors are at the minimum or maximum levels, the other two factors must be at the normal level for proper and reliable unit operation. Definitions ABBREVIATIONS AND DEFINITIONS: CFM = airflow, cubic feet/minute EWT = entering water temperature, Fahrenheit GPM = water flow in gallons/minute WPD = water pressure drop, PSI and feet of water EAT = entering air temperature, Fahrenheit (dry bulb/wet bulb) HC = air heating capacity, MBTUH TC = total cooling capacity, MBTUH SC = sensible cooling capacity, MBTUH KW = total power unit input, kilowatts HR = total heat of rejection, MBTUH HE = total heat of extraction, MBTUH = hot water generator capacity, MBTUH = Energy Efficient Ratio = BTU output/watt input = Coefficient of Performance = BTU output/btu input LWT = leaving water temperature, LAT = leaving air temperature, TH = total heating capacity, MBTUH LC = latent cooling capacity, MBTUH S/T = sensible to total cooling ratio SD1200AK6 10/13 17 Page of

18 Correction Factor Tables Cooling Capacity Corrections Entering Total Sensible Cooling Capacity Multipliers - Entering DB ºF Heat of Air WB ºF Clg Cap Input Rejection * * * * * * * * * * * * * * * * * * * NOTE: * Sensible capacity equals total capacity at conditions shown. 11/10/09 Heating Corrections Ent Air DB Htg Cap Heat of Ext /10/09 Airflow Corrections Airflow Cooling Heating cfm Per Ton of Clg % of Nominal Total Cap Sens Cap Heat of Rej Htg Cap Heat of Ext /10/09 SD1200AK6 10/13 18 Page of

19 Antifreeze Corrections Antifreeze Corrections Catalog performance can be corrected for antifreeze use. Please use the following table and note the example given. Antifreeze Type Antifreeze % by wt Cooling Capacity Heating Capacity Pressure Drop EWT - degf [DegC] 90 [32.2] 30 [-1.1] 30 [-1.1] Water Ethylene Glycol Propylene Glycol Ethanol Methanol Warning: Gray area represents antifreeze concentrations greater than 35% by weight and should be avoided due to the extreme performance penalty they represent. Antifreeze Correction Example Antifreeze solution is Propylene Glycol 20% by weight. Determine the corrected heating and cooling performance at 30 and 90 respectively as well as pressure drop at 30 for a YGS*024-PSC. The corrected cooling capacity at 90 would be: 24,500 Btu/h x = 23,740 Btu/h The corrected heating capacity at 30 would be: 19,000 Btu/h x = 17,347 Btu/h The corrected pressure drop at 30 and 6 would be: 10.5 ft. hd x = ft. hd. SD1200AK6 10/13 19 Page of

20 Pressure Drop Model Pressure Drop (psi) /6/10 Valve Cv Pressure Drop (psi) /2 in /2 in /2 in /2 in /4 in /4 in /4 in /4 in /4 in in in in in /10/09 SD1200AK6 10/13 20 Page of

21 YG009 - Performance Data Single Speed PSC (350 cfm) EWT Flow psi WPD HEATING - EAT 70 COOLING - EAT 80/67 ft. hd. HC HE LAT TC SC S/T Ratio HR /10/09 SD1200AK6 10/13 21 Page of

Heating and Air Conditioning

Heating and Air Conditioning SUBMITTAL SET AFFINITY COMPACT COMMERCIAL GEOTHERMAL/ WATER SOURCE HEAT PUMPS SINGLE AND DUAL CAPACITY MODELS: YKS009-0 (.75 THRU 6 NOMINAL TONS) YKT026-072 (2 THRU 6 NOMINAL