CLEVIS HANGER 401. Standard Duty B A
|
|
- Alexis Rice
- 5 years ago
- Views:
Transcription
1 CLEVIS HNGER 40 Standard Duty Size Range: /2 through 24 Surface Finish: Electro-zinc plated non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) Part Nominal Max. Rec EG /2" 3/8 2-/8" -5/8" EG 3/4" 3/8 2-3/8" -3/4" EG " 3/8 2-3/4" 2-/6" EG -/4" 3/8 3-5/6" 2-3/8" EG -/2" 3/8 3-5/6" 2-5/6" EG 2" 3/8 4-/2" 3-/4" EG 2-/2" /2 5-/4" 3-3/4" EG 3" /2 6" 4-/8" EG 3-/2" /2 6-/2" 4-7/6" EG 4" 5/8 7-3/4" 5-3/8" EG 5" 5/8 9-3/4" 6-3/6" EG 6" 3/4-3/4" 8-/4" EG 8" 3/4 4" 9-/2" EG 0" 7/8 6-/2" 0-7/8" EG 2" 7/8 8-5/8" 2" EG 4" 2-3/4" 4-/2" EG 6" 24" 5-3/4" EG 8" -/8 26-3/4" 7-/2" EG 20" -/4 30" 9-5/8" EG 24" -/4 34-/8" 2-3/4" /2-8
2 CDDY SLOT LOCK Standard Duty Size Range: 2 and 4 Surface Finish: Electro-zinc plated Slotted crossbeam design is easier to assemble than conventional nut and bolt style clevis hangers Eliminates the need to install additional parts to control deflection non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) NEW Patent Pending Part Nominal Max. Rec EG 2" 3/8 4-/6 3-3/8" EG 4" 5/8 7-3/4 5-3/8 30 Features UL Listed and FM approved Each assembly comes individually bagged, ready to assemble Patent-pending slotted crossbeam design is easier and faster to assemble than conventional nut and bolt style hangers Notches in the crossbeam capture the top and bottom legs under load, minimizing deflection Meets FM deflection requirements without the need to install additional parts Has successfully passed the rigorous vibration testing requirements for both UL and FM The CDDY SLOT LOCK Hanger is UL Listed under UL 203 for fire protection applications
3 CLEVIS HNGER 40 Light Duty Size Range: /2 through 8 Surface Finish: Electro-zinc plated Recommended for the suspension of light stationary non-insulated pipe or conduit lines Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) Standard electro-zinc plated finish is cleaner, provides superior corrosion protection Part Nominal Max. Rec EG /2" 3/8 2-/8" -5/8" EG 3/4" 3/8 2-3/8" -3/4" EG " 3/8 2-3/4" 2-/6" EG -/4" 3/8 3-5/6" 2-3/8" EG -/2" 3/8 4" 2-5/6" EG 2" 3/8 4-/2" 3-3/6" EG 2-/2" /2 5-/4" 3-/6" EG 3" /2 6" 4-3/6" EG 3-/2" /2 6-/2" 4-3/8" EG 4" 5/8 7-3/4" 5-3/8" EG 5" 5/8 9-3/4" 6-3/6" EG 6" 3/4-3/4" 8-/4" EG 8" 3/4 4" 9-/2" 200
4 CLEVIS HNGER 402 Light Duty for Copper Tubing Size Range: /2 through 8 Surface Finish: Copper-colored coating (for identification purposes only) non-insulated copper tubing lines Conforms with Federal Specification WW-H-7 (Type 2), SP-69 (Type ) Part Nominal Max. Rec CP /2" 3/8 2-/6 -/ CP 3/4" 3/8 2-5/6-3/ CP " 3/ / CP -/4" 3/8 2-3/ CP -/2" 3/8 3-5/6 2-7/ CP 2" 3/8 4-/6 2-7/ CP 2-/2" /2 4-3/6 3-5/ CP 3" /2 5-/2 3-3/ CP 3-/2" /2 6-/8 4-/ CP 4" /2 6-3/4 4-/ CP 5" /2 9-/8 6-3/ CP 6" 5/8 -/6 7-7/ CP 8" 3/4 4-7/8 0-9/6 60
5 CLEVIS HNGER 420 Standard Duty Epoxy Coated Size Range: /2 through 8 Surface Finish: Epoxy Coated non-insulated pipe lines where it is undesirable to have the steel of the hanger in direct contact with the pipe Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) Part Nominal Max. Rec EP /2" 3/8 2-/8" -5/8" EP 3/4" 3/8 2-3/8" -3/4" EP " 3/8 2-3/4" 2-/6" EP -/4" 3/8 3-5/6" 2-3/8" EP -/2" 3/8 3-5/6" 2-5/6" EP 2" 3/8 4-/2" 3-/4" EP 2-/2" /2 5-/4" 3-3/4" EP 3" /2 6" 4-/8" EP 4" /2 7-3/4" 5-3/8" EP 5" /2 9-3/4" 6-3/6" EP 6" /2-3/4" 8-/4" EP 8" /2 4" 9-/2" /2-8
6 CLEVIS HNGER 40RO Standard Duty Size Range: /2 through 24 Surface Finish: Red-oxide primer coating non-insulated pipe lines Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) Part Nominal Max. Rec RO /2" 3/8 2-/8" -5/8" RO 3/4" 3/8 2-3/8" -3/4" RO " 3/8 2-3/4" 2-/6" RO -/4" 3/8 3-5/6" 2-3/8" RO -/2" 3/8 3-5/6" 2-5/6" RO 2" 3/8 4-/2" 3-/4" RO 2-/2" /2 5-/4" 3-3/4" RO 3" /2 6" 4-/8" RO 3-/2" /2 6-/2" 4-7/6" RO 4" 5/8 7-3/4" 5-3/8" RO 5" 5/8 9-3/4" 6-3/6" RO 6" 3/4-3/4" 8-/4" RO 8" 3/4 4" 9-/2" RO 0" 7/8 6-/2" 0-7/8" RO 2" 7/8 8-5/8" 2" RO 4" 2-3/4" 4-/2" RO 6" 24" 5-3/4" RO 8" -/8 26-3/4" 7-/2" RO 20" -/4 30" 9-5/8" RO 24" -/4 34-/8" 2-3/4" /2-8
7 CLEVIS HNGER 403 Standard Duty with Insulation Shield Size Range: -/2 through 22 Surface Finish: Electro-zinc plated non-insulated pipe lines Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) Part Nominal C Max. Rec EG -/2" 3/8 5" 3-3/6" EG 2" 3/8 5-5/6" 3-5/6" EG 2-/2" /2 6-3/6" 4-7/6" EG 3" /2 6-3/4" 4-/6" EG 3-/2" /2 7-/4" 4-5/6" EG 4" 5/8 7-/4" 4-/6" EG 4-/2" 5/8 9-9/6" 6-7/8" EG 5" 5/8 0" 6-5/6" EG 6" 3/4 -/6" 7-7/6" EG 7" 3/4 2-5/6" 8-7/8" EG 8" 3/4 3-3/6" 9-5/6" EG 9" 7/8 4-3/8" 8-7/8" EG 0" 7/8 6-5/6" 0-5/6" EG " 7/8 8-3/8" -7/8" EG 2" 7/8 9-5/8" 2-5/8" EG 4" 20-/2" 3" EG 5" 20-5/8" 2-3/8" EG 6" 22-/2" 4" EG 7" -/8 23-3/4" 4-3/4" EG 8" -/8 25-3/6" 6-3/4" EG 9" -/4 27-/2" 7-3/4" EG 20" -/4 29" 8-3/8" EG 2" -/4 29-/4" 8-/4" EG 22" -/4 30-/4" 8-5/8" Flared edges on shield sizes thru 4 only C
8 CLEVIS HNGER 405 Standard Duty WW Cast Iron Pipe Size Range: 3 through 24 Surface Finish: lack (Plain) non-insulated cast iron pipe lines Conforms with Federal Specification WW-H-7 (Type ), SP-69 (Type ) Part Nominal Max. Rec PL 3" /2 6-/6 4-/2" PL 4" 5/8 8-3/8 5-/ PL 6" 3/4 0-5/ PL 8" 7/8 3-/4 8-3/ PL 0" 7/8 5-7/8 0-/ PL 2" 7/8 7-3/8 0-/8" PL 4" 2-5/8 3-/2" PL 6" 23-3/4" 4-7/ PL 8" -/8 26-3/8 6-/2" PL 20" -/4 29-5/8 8-/ PL 24" -/4 34-7/8 2-3/6 4800
Pipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
More informationHANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
More informationPipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationSTANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
More informationPipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationSURGE RESTRAINT FIG. 055
NFPA SWIVL RING HANGR Function: esigned for the suspension of non-insulated stationary pipe lines. The knurled insert nut that allows a vertical adjustment after installation, is tapped to NFPA reduced
More informationPIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationProduct Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
More informationFig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece
ig. xtension piece Range: " through " Material: Malleable iron Maximum Temperature: 40 Service: or attaching hanger rod to various types of building attachments. pprovals: UL Listed ( " - " rod size) and
More informationElectrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationPHD Manufacturing, Inc.
4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most
More informationELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
More informationBand Hanger PRODUCT SPECIFICATIONS 1 0F 2. Product Features. Certifications
PRODUT SPEIITIONS 0 2 and Hanger Product eatures Range: 2" through 8" Material: arbon steel inish: alvanized Maximum Temperature: 60 Threads are countersunk so that they cannot become burred or damaged.
More informationElectrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
More informationFIXING, FASTENING & SUPPORT PRODUCTS FOR HVAC, PLUMBING, REFRIGERATION, FIRE PROTECTION & SEISMIC APPLICATIONS
FIXING, FASTENING & SUPPORT PRODUCTS FOR HVAC, PLUMBING, REFRIGERATION, FIRE PROTECTION & SEISMIC APPLICATIONS 1 2 3 4 5 6 7 8 Pentair Technical Solutions is a global provider of systems and solutions
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationProduct Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
More informationCCTF LOOKING BACK AND BEYOND
CCTF LOOKING BACK AND BEYOND CCTF was incorporated in Canada in 1952 as Clyde Tube Forging, a manufacturer of butt weld fittings originally from Scotland. EMCO Limited purchased the company in 1954. The
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationSECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More informationPipe Hangers, Strut & Accessories
I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r
More informationSPECIFICATION HIGH IMPACT RESISTANT THERMOPLASTIC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 2095TRWRI 20A 125V Spec TR & WR Gfci Rec Pass & Seymour/Legrand Catalog Number 2095TRWRI Manufacturer Pass & Seymour/Legrand
More informationFM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationCADDY SEISMIC SWAY BRACING
DDY SEISMI SWY RING Page 214 Page 215 Page 215 Page 215 TP0 TP5 TP5G TP5 Page 216 Page 216 Page 217 Page 217 TP230 TP230G TP235 TP240 Page 218 Page 219 Page 0 TP280 S55 DDY EZ RE 213 DDY SEISMI SWY RING
More informationT38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationINTRODUCTION SAKETH EXIM
Certificates INTRODUCTION SAKETH EXIM is an Industrial Powerhouse with a dominant presence in Manufacturing and Fabrication of Metal Products used in Pipe Support Systems, HVAC Anti Vibration System and
More informationAmerican Flow control 5 1/4 b-84-b-5
American Flow control 5 1/4 b-84-b-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
More informationEngineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
More informationLUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT
EXPEDITED AVAILABILITY LUM SERIES-PLED w/ POLE RATED FOR 100MPH SHAFT PROJECT NAME: FIXTURE TYPE: FIXTURE HOUSING Heavy cast low copper aluminum assembly (A360 alloy,
More informationPipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips
Select Language Home Profile Products Contact Us Email Resources Brass Sanitary Fittings Brass Cable Glands Cable Gland Accessories Brass Fasteners Pipe Brackets - Pipe Support Systems Brass Pipe brackets
More informationConduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.
-2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors
More informationBeam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More informationIron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
More informationIntroduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.
Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive
More informationThe SWL Series Swing Check Valves Meets AWWA C Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution
The Series Meets AWWA C-508-01 Standards (Full Waterway) Accepts Air Cushions Cost-effective Swing Check Valve Solution Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick,
More informationForm 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationReference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data
Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16
More informationSee page 167 for sizing charts
Pipe Snap N Shield Clevis Size Range: 2.34" (59.4mm), 3.45" (87.6mm), 4.50" (114.3mm), 5.53" (140.4mm), 6.64" (168.5mm), and 8.64" (219.4mm) Shield Openings Material: Plastic - Gray Thermylene P6-20FG-0738
More informationSTEEL RANGE RUBBER LINED CLIPS BZP M8/M10 UNLINED CLIPS - BZP M8/M10. Technical characteristics of rubber. Standard Type 2 Screw Fixing.
Full range of BZP pipe clamps, with or without Rubber lining for noise insulation. Sizes available 1/4 n.b. (12 14mm o.d.) 8 n.b. (215mm 225mm o.d.). For heavy duty applications, a wider range of BZP split
More informationAMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT
AMERICAN FLOW CONTROL 5 1/4 B-84-B-5 FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available Listed by Underwriters Laboratories, Inc. and Approved by FM Approvals in applicable configurations.
More informationINSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW
INSTALLATION, OPERATION, and MAINTENANCE GUIDE NIBCO Wall Mount Indicator Posts Series NIP-2AW PATENT #US 9,541,218 NIBCO Series NIP-2AW Wall Mount Indicator Posts are designed and manufactured to: Operate
More informationINFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More information5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL
5 1/4 AMERICAN-DARLING B-84-B-5 FIRE HYDRANT BY AMERICAN FLOW CONTROL CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and FM Approved in applicable configurations. ONE-PIECE
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationElectrical Metallic Tubing (EMT) and True Color EMT
Electrical Metallic Tubing (EMT) and True Color EMT E-Z Pull EMT Hot galvanized steel using patented inline Flo-Coat process for long lasting exterior protection E-Z Pull interior coating provides a smooth
More informationK81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
More informationHeavy-Duty Top Post Terminals Fits 6 to 1 gauge cables. Heavy-Duty Top Post Epoxy Coated Terminals
1 6 7 5 4 3 2 1 Fits positive or negative posts 2 Bolt locks firmly from left to right side 3 Lead Alloy 4 Steel inserts avoid stripping 5 Universal Holds cable or strap 6 Removable plate for easy assembly
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More informationAMERICAN FLOW CONTROL 4 3/4 WATEROUS TREND FIRE HYDRANT
AMERICAN FLOW CONTROL 4 3/4 WATEROUS TREND FIRE HYDRANT CONSTRUCTION Fully complies with ANSI/AWWA C502 and is available UL Listed and Approved by FM Approvals in applicable configurations. DUCTILE IRON
More informationNAILCLMP-Nail Clamps RW List Prices - Page J-1
NAILCLMP-Nail Clamps RW List Prices - Page J-1 Pipe Clamps With Nail Suspension Clamps 13405618 1/2 556-2 Half Clamp W/Nail 0.36 13405634 3/4 556-3 Half Clamp W/Nail 0.40 13499998 1 556-4 Half Clamp W/Nail
More informationCam-Lock 111, 120 Joint Restraints Patent Pending
111, 120 Joint Restraints The Next Generation Joint Restraint Technology Smith-Blair Cam-Lock joint restraint products provide a fast and economical means restraining mechanical joint water and wastewater
More informationK81-DD FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-DD FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J K M L N P Q S R
More informationSentinel 250 Fire Hydrant. Solid design and features to meet any municipal requirement.
Sentinel 250 Fire Hydrant Solid design and features to meet any municipal requirement. Product Features That meet any municipal requirement. 1 Operating Nut Shields the hold down nut from tampering and
More informationSee our expanding selection of products on Product Portfolio
See our expanding selection of products on www.fnw.com Product Portfolio Table of Contents Low Lead Products- Page 3 Ball Valves, Check Valves, Strainers, Water Hammer Arrestors Ball Valves, Brass - Page
More informationTECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE The hardware fittings suitable for tension string to be used for 11KV consisting of following
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationGRUVLOK FITTINGS FOR GROOVED-END PIPE
GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These
More informationTRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationSpecification for FLP-series Fusible Link Packages
Specification for FLP-series Fusible Link Packages 1.1. This specification covers the standards, design, & manufacture of the FLP fusible link packages from BI-TORQ Valve Automation. 2.1. The fusible link
More informationMaterial, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
More informationThin Wall Conduit Fittings (For EMT Conduit)
Set Screw Type Fittings - Product of the USA FITTINGS To join EMT to a box or enclosure To couple two ends of EMT conduit Straight Connectors Non-Insulated Features: All connectors available with or without
More information1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
More informationAmerican Flow control 5 1/4 B-62-B-5
American Flow control 5 1/4 B-62-B-5 Fire Hydrant FLOW CONTROL Construction Fully complies with AWWA C502 and is available UL Listed and FM Approved in applicable configurations. one-piece bronze OPERATING
More informationA 120V BR GFI Recpt. Features. Material, Color, and Finish. Description
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AllenWatson@elliottelectric.com 2095 20A 120V BR GFI Recpt. Pass & Seymour/Legrand Catalog Number 2095 Manufacturer Pass
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationCADDY ROD LOCK THREADED ROD MOUNTING SYSTEM BUILD. Assemble on the ground or off-site LIFT. Raise assembly to ceiling DONE. Level, tighten lock nut
CDDY ROD OCK TREDED ROD MOUNTING SYSTEM BUID ssemble on the ground or off-site IT Raise assembly to ceiling DONE evel, tighten lock nut CDDY ROD OCK Threaded Rod Mounting System P. 3-4 CDDY ROD OCK Beam
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationFB Structural System. FlexMove Product Catalogue
Structural System 1 SB-40x40 Support Beam 40x40 Aluminium Anodized UOM : 3 meter / length SB-64x64 Support Beam 64x64 Aluminium Anodized UOM : 3 meter / length SB-64x64C Close slot Support Beam Aluminium
More informationTwist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
More informationRigid/Aluminum Conduit Bodies, Gaskets and Covers
Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain
More informationGOLD LINE QUALITY PARTS
GOLD LINE RIGHT QUALITY RIGHT PRICE RIGHT AWAY Spring Brake Chambers for Trucks, Tractors and Trailers www.goldlinequalityparts.com Edition 2016-01 powered by RIGHT QUALITY RIGHT PRICE RIGHT AWAY ValueShield
More informationMueller Super Centurion 250 Fire Hydrant
Mueller Super Centurion 250 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 250 Fire Hydrant...250 psig rating, high flow, dependable performance,
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationFerrite Cores. Short Form Catalog
Ferrite Cores Short Form Catalog Index Introduction...2 Materials...3 Toroids...4 E, I Cores...14 EFD Cores...18 ETD Cores...20 EER Cores...22 EC Cores...24 U, I, UR Cores...26 Planar E, I Cores...28
More informationVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
More informationELECTRICAL INSTALLATION
ENCLOSURE DIMENSIONS NOTES (3) 3/4" NPT WALL MOUNT BRACKET, (2) 5/16" DIA. THRU - HARDWARE IS CUSTOMER SUPPLIED 1¼" NPT AUTO-TEST OPTION 6.312" 160.3 mm 4.85" 123 mm 3.90" 99 mm 4.95" 126 mm 4.85" 123
More informationCompact Fluorescent Lampholders
table of contents Compact Fluorescent Lampholders Introduction................................................... B2 Smart CFL Color-Coding Chart.................................... B3 G24q/GX24q Base.................................
More informationSteel Framing Systems
Steel Framing Systems Total Cable Management Solutions BS-EN-ISO 9001:2000 QULITY MNGEMENT SYSTEM Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, ksai, Pramzone, BKKS office complex
More informationAWWA C 504 Type - Butterfly Valves AWWA C 504 BUTTERFLY VALVES
AWWA C 504 BUTTERFLY VALVES 19 PRODUCT FEATURES: NSF Certified Fusion Bonded Epoxy Coating and EPDM rubber are used for valves to be used for in direct contact with potable (drinking) water, while all
More informationCOMMERCIAL PRO ILLUSTRATED PARTS MANUAL. Patented
COMMERCIAL PRO with Patented Models: Z21554CPHO Z21554CPHO-CA Z21560CPHO Z21560CPHO-CA Z2460CPKA Z2460CPKA-CA Z2466CPKA Z2466CPKA-CA Z2460CPKA Shown SWISHER ACQUISITION INC. 1602 CORPORATE DRIVE, WARRENSBURG
More informationStainless Steel Ties. Bundle, Tie or Fasten with a wide variety of locking styles to meet your application needs.
Stainless Steel Ties Bundle, Tie or Fasten with a wide variety of locking styles to meet your application needs. Cable Tie Selection Guide Material Tie-Lok Ultra-Lok Ball-Lok Multi-Lok BAND-IT Self-Lok
More informationCOMMERCIAL PRO ILLUSTRATED PARTS MANUAL. Patented
COMMERCIAL PRO with Patented Models: Z21554CPHO Z21554CPHO-CA Z21560CPHO Z21560CPHO-CA Z2460CPKA Z2460CPKA-CA Z2466CPKA Z2466CPKA-CA Z2460CPKA Shown SWISHER ACQUISITION INC. 1602 CORPORATE DRIVE, WARRENSBURG
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationSPECIFICATION HIGH IMPACT RESISTANT THERMOPLASTIC/NYLON
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 2094 Gfci Rec 20a120v20a Pass & Seymour/Legrand Catalog Number 2094 Manufacturer Pass & Seymour/Legrand Description Receptacle,
More information180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
More informationParts & Installation. Slider Series Featuring The Hutch P 3 Pneumatic Pin Puller
The World s Leading Manufacturer Of Trailer Sliders For Over Three Decades. Slider Series Featuring The Hutch P 3 Pneumatic Pin Puller Parts & Installation Advancing the Practical Application of Suspension
More informationELECTRICAL CONDUIT. EMT IMC Rigid Aluminum
ELECTRICAL CONDUIT EMT IMC Rigid Aluminum QUALITY CONDUIT. FRIENDLY SERVICE. FAST DELIVERY. We know you have a lot of options for electrical conduit. That s why we work hard to be your first choice. Why
More informationFORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
More informationPIPE CONNECTORS & ACCESSORIES
PIPE CONNECTORS & ACCESSORIES FLEXIBLE COUPLINGS Transitions cast iron or plastic to cast iron or plastic pipe. 300 series stainless steel clamps Complies with: ASTM C1173-2002 CSA B602-2005 IAPMO 4933
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationCLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More information