Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.

Size: px
Start display at page:

Download "Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit."

Transcription

1 NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors for maintenance. Features Smooth, rounded integral bushings in hubs protect conductor insulation. Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity. Wedge-Lok Form-IN-Place covers with integral gasket are approved for use in wet locations. Grayloy-iron bodies with cast covers and gasket are approved for use in wet locations. Unique Wedge-Lok clip cover design allows easy removal at any later time, without damaging the conduit body. The cover is secured with clips, not screws. Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers. Equivalent FM7 and Form 7 units have identical applications and installation dimensions. Flat back design provides greater cubic content for easier wire pulling, and more room for splicing. Fits flush and snug against flat surfaces for more stable installation. Smooth hub bushings and cover openings protect conductor insulation. Smooth hub openings allow easy conduit joining. Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque. Cover screws and clips are captive to prevent loss. Hub Size (inches), body style, compliance data, maximum wire number/size and cubic capacity molded into body. Standard Materials Body: Grayloy-iron Covers: Grayloy-iron or steel Cover screws: stainless steel Standard Finishes Grayloy-iron bodies and covers: triplecoat (1) zinc electroplate, (2) chromate, and (3) epoxy powder coat Steel covers: zinc electroplate Stamped aluminum covers: natural finish Optional Finish For additional corrosion protection, add suffix -G to the standard catalog number to specify hot dip galvanized. NEC/CEC Certifications and Compliances UL Standard: 514A UL Listed: E CSA Standard: C22.2 No. 18 CSA Certified: Fed. Spec: A-A NEMA Standard: FB-1, FB-2.10 Illustrated Features Type LB Conduit Body with Cast Aluminum Cover, 1 Type C shown Grayloy -Iron, 1 Type C shown with cut-away body and cover to illustrate Wedge-Lok Clip Cover detail Illustrated views are cut away to demonstrate back configurations. O-Z/Gedney Form 7 (C57, 1-1/2 ) 28 Cubic Inches Capacity Flat-Back Design Crouse-Hinds Form 7 (C57, 1-1/2 ) 26 Cubic Inches Capacity Crouse-Hinds and Form 7 are registered trademarks of Cooper Crouse-Hinds. 30

2 NEC/CEC Suitable for use in the following Conduit Bodies C LB LL Max. Wire Fill Grayloy-Iron Max. Wire Fill Grayloy-Iron Max. Wire Fill Grayloy-Iron 1/2 0ZGC17 0ZGLB17 0ZGLL17 3/4 (3) # 6 0ZGC27 (3) # 6 0ZGLB27 (3) # 6 0ZGLL27 1 (3) # 4 0ZGC37 (3) # 4 0ZGLB37 (3) # 4 0ZGLL37 1-1/4 (3) # 3 0ZGC47 (3) # 3 0ZGLB47 (3) # 2 0ZGLL47 1-1/2 (3) # 3 0ZGC57 (3) # 3 0ZGLB57 (3) # 2 0ZGLL57 2 (3) # 1/0 0ZGC67 (3) # 1/0 0ZGLB67 (3) # 3/0 0ZGLL67 2-1/2 (3) 2/0 0ZGC77 (3) 3/0 0ZGLB77 (3) 250 0ZGLL77 3 (3) 2/0 0ZGC87 (3) 2/0 0ZGLB87 (3) 250 0ZGLL87 3-1/2 (3) 300 0ZGLB97 (3) 350 0ZGLL97 4 (3) 350 0ZGLB107 (3) 350 0ZGLL107 E L TA Max. Wire Fill Grayloy-Iron Max. Wire Fill Grayloy-Iron Max. Wire Fill Grayloy-Iron 1/2 0ZGE17 0ZGL17 0ZGTA17 3/4 (3) # 6 0ZGE27 (3) # 6 0ZGL27 (3) # 6 0ZGTA27 1 (3) # 4 0ZGE37 (3) # 4 0ZGL37 (3) # 4 0ZGTA37 1-1/4 (3) # 2 0ZGL47 (3) # 2 0ZGTA47 1-1/2 (3) # 2 0ZGL57 (3) # 2 0ZGTA57 2 (3) # 2 0ZGL67 (3) # 2 0ZGTA67 Refer to following pages for Wiring Capacity Table. L Unilets have double opening and are furnished with one steel cover, assembled. All 1/2 Max Wire Fill Calculations per the NEC - Annex C - Table C8. 31

3 NEC/CEC Suitable for use in the following Conduit Bodies LR Max. Wire Fill Grayloy-Iron Max. Wire Fill Grayloy-Iron T 1/2 0ZGLR17 0ZGT17 3/4 (3) # 6 0ZGLR27 (3) # 6 0ZGT27 1 (3) # 4 0ZGLR37 (3) # 4 0ZGT37 1-1/4 (3) # 2 0ZGLR47 (3) # 3 0ZGT47 1-1/2 (3) # 2 0ZGLR57 (3) # 3 0ZGT57 2 (3) # 2 0ZGLR67 (3) # 2 0ZGT67 2-1/2 0ZGLR77 (3) 1/0 0ZGT77 3 (3) 250 0ZGLR87 (3) 1/0 0ZGT87 3-1/2 (3) 350 0ZGLR97 (3) 3/0 0ZGT97 4 (3) 350 0ZGLR107 (3) 3/0 0ZGT107 TB Max. Wire Fill Grayloy-Iron Max. Wire Fill Grayloy-Iron 1/2 0ZGTB17 0ZGX17 3/4 (3) # 6 0ZGTB27 (3) # 6 0ZGX27 1 (3) # 4 0ZGTB37 (3) # 4 0ZGX37 1-1/4 (3) # 3 0ZGTB47 (3) # 3 0ZGX47 1-1/2 (3) # 2 0ZGTB57 (3) # 2 0ZGX57 2 (3) # 2 0ZGTB67 (3) # 2 0ZGX67 X Refer to following pages for Wiring Capacity Table. All 1/2 Max Wire Fill Calculations per the NEC - Annex C - Table C8. 32

4 NEC/CEC Suitable for use in the following Wedge-Lok Clip Covers and Gaskets (Covers furnished with stainless steel screws) Body Size Wedge-Lok Cast Cover Grayloy-Iron Wedge-Lok Stamped Cover Steel Solid Neoprene Gasket 1/2 0ZG170F 0ZG170 0ZGGASK571 3/4 0ZG270F 0ZG270 0ZGGASK ZG370F 0ZG370 0ZGGASK /4 0ZG470F 0ZG470 0ZGGASK /2 0ZG570F 0ZG570 0ZGGASK ZG670F 0ZG670 0ZGGASK /2 0ZG870F 0ZG870 0ZGGASK ZG870F 0ZG870 0ZGGASK /2 0ZG970F 0ZG970 0ZGGASK ZG970F 0ZG970 0ZGGASK579 33

5 NEC/CEC Suitable for use in the following Wiring Capacity: Combine Body and Cover Capacities for Total Usable Capacity per NEC (A) Trade Size Capacity dm 3 (in 3 ) C E LB LL LR L T TA TB X Stamped Cover Cast Cover FM7 Grayloy -Iron Bodies and Covers: Threaded 1/ (5.00) 0.00 (0.30) (0.40) 3/ (9.00) (0.50) (0.80) (13.50) 1-1/ (22.50) (1.80) 1-1/ (31.00) 0.04 (2.30) 2 (2.80) 0.08 (4.80) 2-1/ /2 4 Form7 Aluminum Bodies and Covers: Threaded 1/2 3/ /4 1-1/ / (0.30) (0.50) (1.80) 0.04 (2.30) (2.80) (0.40) (0.80) 0.08 (4.80) 3 3-1/2 4 34

6 Form 7 Covers with Integral Form-In-Place Gasket. NEC/CEC: Class I, Division 2 NEMA 3R Applications Cover with integral gasket for FM7 conduit bodies. Can be used as replacement covers for installed bodies or in new installations. Features Benefit from superior sealing, reduced inventory parts and faster installation times. Captive pan-head screws. Wedge-Lok clips (FM7 and Form 7 only) provide superior screwdriver torque and cover seating. High-strength, corrosion and weather resistant. Approved for wet locations. Fits all body configurations and sizes from 1/2" thru 4". Operating temperature: -54 C to +150 C (-65 F to +302 F). Standard Materials Stamped steel Stamped aluminum Cast grayloy-iron Cast aluminum Gasket - Urethane NEC/CEC Certifications and Compliances UL Listed: E2527 CSA Certified: 65183, Class Stamped Steel Stamped Aluminum Cast Grayloy-Iron Cast Aluminum 1/2 0ZG170IG 0ZG170IGSA 0ZG170FIG 0ZG170FIGSA 3/4 0ZG270IG 0ZG270IGSA 0ZG270FIG 0ZG270FIGSA 1 0ZG370IG 0ZG370IGSA 0ZG370FIG 0ZG370FIGSA 1-1/4 0ZG470IG 0ZG470IGSA 0ZG470FIG 0ZG470FIGSA 1-1/2 0ZG570IG 0ZG570IGSA 0ZG570FIG 0ZG570FIGSA 2 0ZG670IG 0ZG670IGSA 0ZG670FIG 0ZG670FIGSA 2-1/2 and 3 0ZG870IG 0ZG870IGSA 0ZG870FIG 0ZG870FIGSA 3-1/2 and 4 0ZG970IG 0ZG970IGSA 0ZG970FIG 0ZG970FIGSA 35

7 NEC/CEC: Class I, Division 2 NEMA 3R Dimensions in Millimeters Type C Type E, L, LB, LL, LR Type T, TA, TB, X Trade Size A B C D E F G H J K L M N P Q R S T 1/2 3/ /4 1-1/ / / (5.00) (5.50) (9.00) (9.00) 35.1 (1.38) 39.6 (1.56) 55.6 (2.19) (5.25) (5.25) 35.1 (1.38) 41.4 (1.63) 47.8 (1.88) 58.7 (2.31) 65.0 (2.56) 79.5 (3.13) (4.38) (4.88) (5.38) (5.38) (7.44) (8.19) (9.19) (12.00) (12.00) 84.1 (3.31) 88.9 (3.50) 98.6 (3.88) (4.13) (4.63) (5.19) 57.2 (2.25) 69.9 (2.75) 81.0 (3.19) 88.9 (3.50) (4.06) (2.25) 63.5 (2.50) 73.2 (2.88) 84.1 (3.31) 93.7 (3.69) (5.13) (5.88) (6.56) (7.06) (3.94) (4.44) (5.19) (5.44) (5.94) (6.63) (8.75) (8.38) (4.56) (5.19) (6.50) (7.13) (8.13) (10.50) (2.25) 58.7 (2.31) 65.0 (2.56) 79.5 (3.13) (10.50) (4.38) (1) (12.69) (12.69) (4.88) (5.38) 16.0 (0.63) 19.1 (0.75) 22.4 (0.88) 28.7 (1.13) 31.8 (1.25) 38.1 (1.50) 54.1 (2.13) 60.5 (2.38) 66.8 (2.63) 31.8 (1.25) 38.1 (1.50) 55.6 (2.19) 88.9 (3.50) (4.75) (5.25) 81.0 (3.19) 96.8 (3.81) (4.50) (5.00) (5.44) (6.38) (8.38) (8.38) 23.9 (0.94) 28.7 (1.13) 35.1 (1.38) 49.3 (1.94) 90.4 (3.56) 90.4 (3.56) (1) (4.50) (1) (4.50) (5.63) (6.25) (7.25) (7.44) (8.19) (9.19) (12.00) (12.06) (14.31) (14.31) 66.8 (2.63) 73.2 (2.88) 82.6 (3.25) 84.1 (3.31) (4.19) 39.6 (1.56) 47.8 (1.88) (2.19) (5.25) (5.25) 66.8 (2.63) 81.0 (3.19) 90.4 (3.56) (4.13) Fraction/Decimal Equivalents Fraction Decimal Fraction Decimal Fraction Decimal Fraction Decimal 1/ / / / / / / / / / / / /4 1/ /

FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.

FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections

More information

FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.

FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections

More information

Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat

Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type

More information

1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information

1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category

More information

FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.

FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors

More information

T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat

T38 1 T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit

More information

FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.

FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide

More information

Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC

Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch

More information

Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.

Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections

More information

Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.

Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.

More information

COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications

COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets

More information

Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.

Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC. NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch

More information

LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT

LB125A 1-1/4 LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit

More information

BUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight

BUB400M 4-In Mog Cond Body. Features. Material, Color, and Finish. Dimensions and Weight 380 South Street 7596-763, TX Nacogdoches Phone: 936-569-79 Fax: 936-560-685 BUB00M -In Mog Cond Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features

More information

U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof

U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +

More information

Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit.

Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; Explosionproof, Dust-Ignitionproof UNILETS for use with Threaded Metal Conduit. -2 Conduit Outlet Boxes and Bodies: Malleable Iron or Aluminum; UNILETS for use with Threaded Metal Conduit. Applications Meet a wide range of classified area requirements. Corrosion-resistant ideal indoors

More information

Rigid/Aluminum Conduit Bodies, Gaskets and Covers

Rigid/Aluminum Conduit Bodies, Gaskets and Covers Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain

More information

Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly

Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection

More information

1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D

1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:

More information

Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.

Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket. U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications

More information

1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D

1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight

More information

Contender Series Factory Sealed Control Stations and Pilot Lights Explosionproof, Dust-Ignitionproof Furnished with Internal Ground Screw.

Contender Series Factory Sealed Control Stations and Pilot Lights Explosionproof, Dust-Ignitionproof Furnished with Internal Ground Screw. Contender Series Factory Sealed Control Stations and Pilot Lights Furnished with Internal Ground Screw. Applications Push buttons and selector switches are used in conjunction with contactors or magnetic

More information

Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.

Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket. U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications

More information

Condulet Cast Device Boxes and Covers Application and Selection

Condulet Cast Device Boxes and Covers Application and Selection F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit

More information

INTERCHANGEABLE PRODUCTS WITH AN ADVANTAGE

INTERCHANGEABLE PRODUCTS WITH AN ADVANTAGE INTERCHANGEABLE PRODUCTS WITH AN ADVANTAGE Appleton Products UL Certified To Interchange With Crouse-Hinds Products Page 2 Appleton Products with an Advantage that are Interchangeable with Crouse-Hinds

More information

Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat

Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors

More information

Condulet Single Gang Cast Device Boxes With and Without Mounting Lugs for Threaded Rigid and IMC Conduit

Condulet Single Gang Cast Device Boxes With and Without Mounting Lugs for Threaded Rigid and IMC Conduit Condulet Single Gang Cast Accessories Pages to 44 F Application: Cast device boxes are installed to: accommodate wiring devices act as pull boxes for conductors in a conduit system provide openings to

More information

W-Series Junction Boxes

W-Series Junction Boxes W-Series Junction Boxes Application and Selection Junction boxes, designed for hazardous and non-hazardous locations, are used in a variety of industries to perform the following functions: As a pull box

More information

CONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features

CONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and

More information

EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.

EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit. UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect

More information

Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings

Non-Metallic, Armored Cable, and Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable and Portable Cord Connectors Non-Metallic Sheathed Cable Connectors Armored Cable and Flexible Connectors Armored Cable and Flexible Connectors Armored, Metal Clad, and Non-Metallic

More information

Junction Boxes Hazardous and Non-Hazardous

Junction Boxes Hazardous and Non-Hazardous Junction Boxes Hazardous and Non-Hazardous Description Page No. Application/Selection 112 Boxes Flush EGJ Series 19 WJBF Recessed Sidewalk Cover Series 116 Service Station EGJ Series 19 GUA Series 17 GUP

More information

EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.

EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect

More information

Product Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33

Product Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33 SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9

More information

Division 2 Contender Series Factory Sealed Control Stations

Division 2 Contender Series Factory Sealed Control Stations NEMA 3, 3R, 4, 4X, 12 IP66 Applications For use in washdown areas and other damp, wet and highly corrosive areas. Push buttons and selector switches are used in conjunction with contactors or magnetic

More information

Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows:

Cable Supports. Requirements for Cable Supports in the National Electrical Code reads as follows: QA1 General Information are used to support cables in vertical raceways or risers. Cable supports relieve the strain that would be placed on terminations, the interior of panels, or other devices to which

More information

Conduit Bushings for Rigid Metal Conduit and IMC

Conduit Bushings for Rigid Metal Conduit and IMC Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated

More information

Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed

Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,

More information

Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors

Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical

More information

Plugs and Receptacles: Hazardous Location

Plugs and Receptacles: Hazardous Location U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable

More information

Condulet Conduit Bodies and Outlet Boxes Hazardous

Condulet Conduit Bodies and Outlet Boxes Hazardous Condulet Conduit Bodies and Outlet Boxes Hazardous 4F Description Page No. Application/Selection 48, 49 Lubricants HTL 59 STL 59 Conduit Bodies & Outlet Boxes Cylindrical EKC 57 90 Elbow LBH 58 LBY 58

More information

Spring-loaded cover seats against neoprene gasket.

Spring-loaded cover seats against neoprene gasket. U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs

More information

Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems

Product Specification Guide Expansion and Deflection Couplings. SECTION Raceway and Boxes for Electrical Systems Product Specification Guide Expansion and Deflection Couplings SECTION 26 05 33 Raceway and Boxes for Electrical Systems Specifier Notes: Delete any information below in Parts 1, 2 or 3 which is not required

More information

Applications. Separate sealing chamber and switch construction. Used on 20 Amp 4-way and all 30 Amp models.

Applications. Separate sealing chamber and switch construction. Used on 20 Amp 4-way and all 30 Amp models. Contender Series Factory Sealed Front Operated Tumbler Switches Malleable Iron Body and Cover. Furnished with Internal Ground. NEMA 3, 7CD, 9EFG Applications Designed to prevent arcing of enclosed switches

More information

General Cable Support Information

General Cable Support Information General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices

More information

CONDUIT BODIES CONDUIT BODIES. Phone:

CONDUIT BODIES CONDUIT BODIES. Phone: i i Con it Bo ies allea le I on o i i I C con it cond ctors or p llin splicin Tapered threaded hu s - NPT Suita le or use in concrete Threaded LB Conduit Bodies MLB1 1/2 4-11/16 1-5/16 2-1/16 70 70.6 MLB2

More information

EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.

EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit. EDS Factory Sealed Tumbler Switches UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D NEMA 7 B CD, 9EFG Applications Designed to prevent arcing of enclosed switches

More information

Enclosures. Section E

Enclosures. Section E Enclosures Section E Enclosures and junction boxes built and configured to meet the requirements of the most demanding hazardous areas and industrial environmental applications across the globe. E Enclosures

More information

Applications. Illustrated Features

Applications. Illustrated Features Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing

More information

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors,

More information

Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers

Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers Device Utility Finished FS Gang Conduit Bodies and Covers KO Seals Reducing Washers Mulberry Outlet Box Covers New in this catalog: A full line of die-cast, powder painted conduit bodies: 1/2-4, threaded

More information

ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles

ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:

More information

Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural

Myers Hubs. Standard Finishes: Aluminum: Natural Zinc: Natural Stainless: Natural Applications: Myers Hubs are used in the termination of electrical circuits through wall of the enclosure Designed for use indoors or outdoors with rigid conduit and IMC Ideal for pharmaceutical, chemical

More information

Commercial Products. New Products in the Commercial Products Product Line

Commercial Products. New Products in the Commercial Products Product Line Commercial Products Section A complete solution combining reliability and expertise in every product, providing you with labor and maintenance savings, simplified installation, and improved productivity

More information

ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY

ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and

More information

ALUMINUM OUTLET BODIES

ALUMINUM OUTLET BODIES KILLARK GEB SERIES ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X Applications GEB series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors

More information

EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.

EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Controls CONTROLS: HAZARDOUS LOCATION CONTROL STATIONS AND SWITCHES

More information

Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.

Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,

More information

Corrosion Protection for Electrical Conduit and Fittings

Corrosion Protection for Electrical Conduit and Fittings Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat

More information

CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material.

CP Myers Hubs. Class I, Div. 2 Class II, Div. 1 and 2 Class III. when installed in accordance with the NEC. Features. Material. Myers Hubs Class I, Div. 2 Class II, Div. 1 and 2 Class III when installed in accordance with the NEC. CP Myers Scru-tite TM and Ground hub are used in the termination of electrical circuits through wall

More information

ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY

ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits

More information

Cable Connectors & Conduit Sealing Bushings

Cable Connectors & Conduit Sealing Bushings RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the

More information

Hazardous Factory Sealed Control Devices

Hazardous Factory Sealed Control Devices Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot

More information

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use

More information

Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings...

Specification Grade Insulated Bushings...DA1 Specification Grade Insulated Grounding Bushings...DA2-DA4. Insulating Bushings & Couplings... SECTION D INDEX Product Description Page Number Specification Grade Insulated Bushings.....................DA Specification Grade Insulated Grounding Bushings........DA2-DA4 Insulating Bushings & Couplings.......................DA-DA6

More information

EPOXY POWDER COATED COPPER FREE ALUMINUM

EPOXY POWDER COATED COPPER FREE ALUMINUM 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 AJA510 Alum MTG Unilet Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category Features

More information

EDS / EFS Series Control Stations

EDS / EFS Series Control Stations EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed

More information

HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options

HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities

More information

EDS / EFS Series Control Stations

EDS / EFS Series Control Stations EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures

More information

NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS. Application

NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION CIRCUIT BREAKERS. Application - and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Distribution Equipment NEC/CEC CLASS/ZONE RATED HAZARDOUS

More information

ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)

ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA) 804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit

More information

Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service

Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.

More information

Ground Connectors All Copper Alloy Specification Grade

Ground Connectors All Copper Alloy Specification Grade Connectors For cable connection parallel or at right angles to pipe or rod. Features A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either parallel or at right

More information

Thin Wall Conduit Fittings (For EMT Conduit)

Thin Wall Conduit Fittings (For EMT Conduit) Set Screw Type Fittings - Product of the USA FITTINGS To join EMT to a box or enclosure To couple two ends of EMT conduit Straight Connectors Non-Insulated Features: All connectors available with or without

More information

DISTRIBUTION EQUIPMENT: NEC/CEC HAZARDOUS LOCATION SWITCHES. Application

DISTRIBUTION EQUIPMENT: NEC/CEC HAZARDOUS LOCATION SWITCHES. Application - and 3-Pole, Non-Interchangeable Trip. Bolted Enclosure Type. Class I, Division 1 and, Groups B, C, D Class II, Division 1 and, Groups E, F, G Application Explosionproof circuit breaker enclosures are

More information

Cable Connectors & Conduit Sealing Bushings

Cable Connectors & Conduit Sealing Bushings RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the

More information

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use

More information

Areamaster LED Flood/High Bay Luminaires

Areamaster LED Flood/High Bay Luminaires Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,

More information

Applications. Standard Materials

Applications. Standard Materials Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division

More information

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically

More information

NEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG

NEC DBR Receptacle: Class II, Division 1 and 2, Groups F, G Class III NEMA 3, 3R, 4, 4X, 9FG EBR/DBR 30, 60, 100 and 150 Amp Series Receptacles With Disconnect Switch or Circuit Breaker. Weatherproof Spring Cover. Explosionproof, Dust-Ignitionproof 600 Vac Max. 250 Vdc Max. NEC EBR Receptacle:

More information

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically

More information

Hubbell Marine Isolation Transformers 15 kva and 25 kva Models

Hubbell Marine Isolation Transformers 15 kva and 25 kva Models Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation

More information

Conductor Size 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750 MCM (ALUMINUM/COPPER CLAD, ALUMINUM/COPPER)

Conductor Size 18 TO 8 AWG, 6 TO 0 AWG, 2/0 TO 4/0 AWG, 4/0 AWG TO 750 MCM (ALUMINUM/COPPER CLAD, ALUMINUM/COPPER) 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DR20022 Cable Support Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category DR20022

More information

CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2

CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers

More information

EBMC Combination Line Starters and Enclosures

EBMC Combination Line Starters and Enclosures EBMC Combination Line 3, 3R, 4, 4X, 7BCD, 9EFG, 12 Applications: Spectrum EBM hinged cover motor control enclosures are used: For general motor control and circuit protection indoors and outdoors in damp,

More information

MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series Two-Position Actuators

MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series Two-Position Actuators MAx-305 & MAx-38 Series MAx-405 Through MAx-49 Series Two-Position Actuators General Instructions Application For two-position operation of dampers, valves, and other equipment which require the return

More information

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use

More information

D2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant

D2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in

More information

Stainless Steel Fittings

Stainless Steel Fittings Locknuts & Bushings LOCKNUTS Eaton's Crouse-Hinds Stainless Steel Fittings deliver unbeatable corrosion protection where you need it, saving you time and money throughout the life of your facility. Superior

More information

Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box

Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box 1 TECHNICAL DATA SHEET Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box XPCJ series series of explosionproof aluminum enclosures are typically used in the packaging of electrical/electronic

More information

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable

More information

Circuit Breakers Hazardous

Circuit Breakers Hazardous s Hazardous 3C Description Page No. Application/Selection 364 Auxiliary s & s EFD, EFDC Series 382 Thermal Magnetic s & s General Information and Dimensions EPC Series 370, 371 FLB Series 375 EBMB Series

More information

WP Plugs and DS Receptacles For FS and FD Cast Device Boxes

WP Plugs and DS Receptacles For FS and FD Cast Device Boxes WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations

More information

4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)

4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) 4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are

More information

Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.

Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations. A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage

More information

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles

Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically

More information

Control Circuits Connectors Type SK & SKW Overview

Control Circuits Connectors Type SK & SKW Overview Control Circuits Connectors Type SK & SKW Overview 20 Amp, 250 Volts AC or DC, 600 Volts AC Max. Rating Load-Breaking Multi-Circuit Receptacles, Plugs, Connectors and Inlets Features and Benefits Type

More information

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles

Powertite Series Pin and Sleeve Plugs, Connectors and Receptacles Applications Designed to supply power to portable or fixed electrical equipment such as motor generator units, welders, pumps, compressors, cellular relay stations, and similar apparatus. Ideal for use

More information

Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures

Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical

More information