CADDY SEISMIC SWAY BRACING
|
|
|
- Robert Hardy
- 6 years ago
- Views:
Transcription
1 DDY SEISMI SWY RING Page 214 Page 215 Page 215 Page 215 TP0 TP5 TP5G TP5 Page 216 Page 216 Page 217 Page 217 TP230 TP230G TP235 TP240 Page 218 Page 219 Page 0 TP280 S55 DDY EZ RE 213
2 DDY SEISMI SWY RING SWY RING TP0 Quick lamp Sway race Pipe ttachment Size Range: 1-1/4 thru 8 braced pipe Used for laterally bracing pipe against sway disturbances Snap off nut design at recommended torque Finish: Electro-zinc galvanized (EG) NOTE: lso available in Plain (PL) finish (Service (race Pipe Size) (in) Pipe Size) (in) (in) TP EG 1-1/ /16 TP EG 1-1/ /8 TP EG /16 TP EG 2-1/ /2 TP EG /4 TP EG /8 TP EG /8 TP EG TP EG /4 TP EG 1-1/4 1-1/4 5-1/4 TP EG 1-1/2 1-1/4 5-1/2 TP EG 2 1-1/4 6 TP EG 2-1/2 1-1/4 6-1/2 TP EG 3 1-1/4 7-1/4 TP EG 4 1-1/4 8-5/16 TP EG 5 1-1/4 9-1/4 TP EG* 6 1-1/4 10-1/2 TP EG* 8 1-1/4 12 race Pipe *Not Listed Service Pipe 214
3 DDY SEISMI SWY RING SWY RING TP5 & TP5G Quick End Threadless race Fitting Size Range: 1 and 1-1/4 bracing pipe Used to install lateral and/or longitudinal sway bracing NOTE: lso available in Plain (PL) finish TP5 Fig. (race D No. Pipe Size) (in) (in) (in) (in) TP5G100EG* /8 1-1/4 1-1/4 TP5G125EG* 1 1-1/4 1-5/8 1-1/4 1-1/4 TP5100EG /8 1-3/8 1-1/8 TP5125EG 2 1-1/4 1-5/8 1-3/8 1-1/8 TP5G *Heavy Duty ssembly D 9/16" DI. TP5 Fig. 2 D 17/32 Fig. 1 Fig. 1 TP5G Fig. 2 SWY RING DPTER PLTE TP5 Quick Loader dapter Plate llows TP5 to be attached with two or three attachment bolts NOTE: lso available in Plain (PL) finish 1 1/2" 1 1/2" TP5000EG 4 3/4" 215
4 DDY SEISMI SWY RING SWY RING TP230 & TP230G Quick In-line Lateral & Longitudinal Sway race lamp Size Range: 1 thru 8 braced pipe Used for laterally and longitudinally bracing piping against sway NOTE: lso available in Plain (PL) finish TP230 Fig. (Service (race D No. Pipe Size) (in) Pipe Size) (in) (in) (in) TP EG /16 1 TP EG 1 1-1/4 1 3/16 1 TP EG 1 1-1/2 1 3/16 1 TP EG /16 1 TP EG 1 2-1/2 1 3/16 1 TP EG /16 1 TP EG 1 1-1/4 1-1/4 3/16 1 TP EG 1 1-1/2 1-1/4 3/16 1 TP EG /4 3/16 1 TP EG 1 2-1/2 1-1/4 3/16 1 TP EG /4 3/16 1 TP230G EG* /16 1 TP230G EG* /16 2 TP230G EG* /16 2 TP230G EG* /4 2 TP230G EG* /4 3/16 1 TP230G EG* /4 3/16 2 TP230G EG* /4 3/16 2 TP230G EG* /4 1/4 2 TP230G *Heavy Duty ssembly race Pipe Fig. 1 Fig. 2 D 216
5 DDY SEISMI SWY RING SWY RING TP235 Quick Tab Welded Longitudinal Sway race Fitting Size Range: 1 and 1-1/4 bracing pipe Used for longitudinally bracing piping against sway when welding is an option NOTE: lso available in Plain (PL) finish (race Pipe Size) (in) (in) (in) TP235100EG 1 3/16 1 TP235125EG 1-1/4 3/16 1 SWY RING TP240 Quick 4-way Longitudinal Sway race lamp Size Range: 1 and 1-1/4 bracing pipe Used for longitudinally bracing lateral sway bracing against sway disturbance lso used for riser bracing NOTE: lso available in Plain (PL) finish (race 1 Pipe Size) (in) (in) (in) x 1 TP EG 1 x 1 1-3/8 1-3/8 TP EG 1-1/4 x 1-1/4 1-3/8 1-5/
6 DDY SEISMI SWY RING SWY RING TP280 Threaded Sway race Fitting Size Range: 1 pipe Used with Models: #400, #450, #610, and any length of 1 pipe to restrain pipe from swaying during an earthquake NOTE: Plain (PL) finish available by special order Pipe Size (in) Style TP EG 1 TP280P0100EG 1 Welded Structural ttachment 320W0050PL Style Style UL LISTING & TESTED WORKING LOD HRT FOR ERIO SWY RES* Pipe Working Model Model Model Model Model Model Model Size Load Per TP0** TP5 TP5G TP230 TP230G TP235 TP240 (in) U.L LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED 2-1/2 395 LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED 3-1/2 540 LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED LISTED** LISTED LISTED NOT LISTED LISTED LISTED LISTED LISTED LISTED LISTED NOT LISTED LISTED LISTED LISTED NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED NOT LISTED NOT LISTED LISTED NOT LISTED LISTED LISTED NOT LISTED *See website for latest updates at ** TP0 list only through 4 pipe for schedule 10 pipe 1. ERIO Sway races are UL tested and Listed for use with STM schedule 10 and 40 brace pipe 2. ERIO Sway races meet the full UL rated load when used with 1 or 1-1/4 schedule 40 brace pipe 3. ERIO Sway races meet the UL requirement that lateral braces must support a load equal to 1-1/2 times the working load without slippage. ctual working load capacity can be more than UL203 above. See our rated loads on the UL website. 218
7 DDY SEISMI SWY RING SWY RING S55 S55N Easy ttach Sway race Lateral and longitudinal sway bracing attachments culus Listed Set screw torque in the brace attachment is 160 in-lbs Structural attachment bracket (L100000EG) included with S55N, additional L100000EG attachments can be ordered separately for added attachment strength For use with ERI16 and Plain (PL) finish race Sprinkler Working Max. Rec. ttach- Description Pipe Finish Pipe Size to Load Torque Value ment Size be raced (lbs) for olts Hole (in) (in) (ft lbs) Size (in) S55N EG Sway brace clamp, 3/8 x 1 1 EG 1-2-1/ /8 S55N PL Sway brace clamp, 3/8 x 1 1 Plain 1-2-1/ /8 S55N EG Sway brace clamp, 1/2 x 1 1 EG 1-3-1/ /2 S55N PL Sway brace clamp, 1/2 x 1 1 Plain 1-3-1/ /2 S55N EG Sway brace clamp, 5/8 x 1 1 EG /8 S55N PL Sway brace clamp, 5/8 x 1 1 Plain /8 S55N EG Sway brace clamp, 3/8 x /4 EG 1-2-1/ /8 S55N PL Sway brace clamp, 3/8 x /4 Plain 1-2-1/ /8 S55N EG Sway brace clamp, 1/2 x /4 EG 1-3-1/ /2 S55N PL Sway brace clamp, 1/2 x /4 Plain 1-3-1/ /2 S55N EG Sway brace clamp, 5/8 x /4 EG /8 S55N PL Sway brace clamp, 5/8 x /4 Plain /8 ttachment Hole Size Finish S50N038EG 3/8 EG S50N050EG 1/2 EG S50N062EG 5/8 EG S50N038PL 3/8 Plain S50N050PL 1/2 Plain S50N062PL 5/8 Plain S50N ttachment Hole Size S55N race Pipe dditional S50N if needed 219
8 DDY SEISMI SWY RING DDY EZ RE The fast easy to install DDY EZ RE seismic sway brace No disassembly of hardware, it stays in place Patent pending design all for availability Finish: Electrogalvanised, Hot dip galvanised (HDG) and Plain (PL) race Pipe Size (in) Service Pipe Size(in) SEZ EG 1 1 SEZ EG 1 1-1/4 SEZ EG 1 1-1/2 SEZ EG 1 2 SEZ EG 1 2-1/2 SEZ EG 1 3 SEZ EG 1 4 SEZ EG 1 5 SEZ EG 1 6 SEZ EG 1 8 SEZ EG 1-1/4 1 SEZ EG 1-1/4 1-1/4 SEZ EG 1-1/4 1-1/2 SEZ EG 1-1/4 2 SEZ EG 1-1/4 2-1/2 SEZ EG 1-1/4 3 SEZ EG 1-1/4 4 SEZ EG 1-1/4 5 SEZ EG 1-1/4 6 SEZ EG 1-1/4 8 Pictured with our S55N product for structural attachment. 0
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
CLEVIS HANGER 401. Standard Duty B A
CLEVIS HNGER 40 Standard Duty Size Range: /2 through 24 Surface Finish: Electro-zinc plated non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection
STANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
Pipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
Electrical Accessories
complete system of top quality, time saving products, designed for surface metal raceways, lighting and cable supports. Innovative designs offer many installation advantages. -Line s surface raceways are
Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
Beam Clamps. Materials & Finishes (Unless otherwise
Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports
CCTF LOOKING BACK AND BEYOND
CCTF LOOKING BACK AND BEYOND CCTF was incorporated in Canada in 1952 as Clyde Tube Forging, a manufacturer of butt weld fittings originally from Scotland. EMCO Limited purchased the company in 1954. The
Pipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
HANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
SEE VICTAULIC PUBLICATION FOR DETAILS
dapters SEE VICTULIC PULICTION 10.01 FOR DETILS Style 741 Style 741 adapter is designed for directly incorporating flanged components with NSI CL. 125 or CL. 150/PN10 and PN16 or ustralian Standard Table
Pipe Hangers and Supports
November 20 or the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Hangers and U I L I N G O N N E T I O N S T H T L S T UILING ONNETIONS THT LST
Series 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
Series 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
Series 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
Series 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
Pipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
Series 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
Cable & Wire Management
Type 1 Screw over... 8-14 Type 1 Quick-onnect inge over... 15-20 Type 3R nviroshield... 21-24 Type 12... 25-31 eed-through Wireway Type 12... 32-35 eed-through Wireway Type 4X... 36-39 Wiring Trough Type
ELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
SURGE RESTRAINT FIG. 055
NFPA SWIVL RING HANGR Function: esigned for the suspension of non-insulated stationary pipe lines. The knurled insert nut that allows a vertical adjustment after installation, is tapped to NFPA reduced
PRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CATALOGUE REGISTERED COMPANY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY Who we are Founded in 2005 by Directors Hayden Froggatt and
STRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
KwikSplice Aluminum Cable Tray - Straight Sections & Accessories
KwikSplice luminum able Tray - Straight Sections & ccessories Straight Sections - see pages G-3 G-6 overs - see page G-13 ccessories - see pages G-7 G-18 G-1 -Line series able Tray Systems KwikSplice luminum
Cable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
PIPE SUPPORT HARDWARE
atalog No. 6. WITH PIPE SUPPORT SYSTEMS PIPE SUPPORT HRDWRE RPENTER & PTERSON, IN. DESIGNERS ENGINEERS MNUFTURERS Introduction Since 9 arpenter & Paterson, Inc. has specialized in the manufacture and distribution
Disassembly. Getting Started (IF USING BEARING UPPER MOUNT SKIP TO STEP 9) Installation Instructions.
Part # 00-00 up Camaro Recommended Tools 00-up Camaro Front CoilOver Strut Table of contents Page... Included components Page... Disassembly and Getting Started Page... CoilSpring ssembly and Bearing Option
Installation Instructions
Installation Installation Part # 11503111-2010 up Camaro Recommended Tools 2010-up Camaro TQ Front CoilOver Strut Installation Table of contents Page 2... Included Components Page 3... Disassembly and
REDI-RAIL - Accessories
- ccessories Standard Splice Plate One pair including hardware provided with each straight section. (Expansion splice quantity subtracted) R4-SSP R5-SSP R6-SSP R7-SSP Expansion Splice Plate Bonding jumpers
REDI-RAIL - Accessories
Standard Splice Plates One pair including hardware provided with each straight section. Offset Reducing Splice Plates FLEX-MOUNT djustable Splice Plates 1 /4" hardware. Horizontally adjustable to 90. Vertically
PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
Installation Instructions. Installation Instructions. Part # up Camaro up Camaro Front AirStrut.
Part # 11502401-2010 up Camaro Recommended Tools 2010-up Camaro Front irstrut Table of contents Page 2... Included components Page 3... Disassembly and Getting Started Page 4-6... ssembly Page 7... Final
Series 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
Section 1. Grooved Mechanical Couplings, Flange Adapters & Mechanical Tees
Section 1 Grooved Mechanical ouplings, Flange dapters & Mechanical Tees Grooved Mechanical ouplings... 1 Rigid & Flexible ouplings... 13 M-7 Installation-Ready Rigid oupling... 14 K-9 & Z05 Rigid oupling...
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York Bulletin 617 Rev. C
ulletin 617 Rev. Model R ommercial Riser Riser Manifold for ommercial pplications ulletin 617 Rev. vailable Sizes/Pressure Ratings: 1 1 / 2 (40mm) and 2 (50mm) Threaded - 250 psi (17,2 bar) Working Pressure
P R O D U C T C A T A L O G
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. P R O D U C T C A T A L O G 2017 Feb. 2 www.aaatech.com P R O U D L Y S E R V I N G I N D U S T R Y S I N C E 1 9 7 1 AAA Technology & Specialties Co.,
Channel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101
GROOVED COUPLINGS - STANDARD FLEXIBLE Model 101 Available Sizes 1" through 12" (25 through ) Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses
Fig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece
ig. xtension piece Range: " through " Material: Malleable iron Maximum Temperature: 40 Service: or attaching hanger rod to various types of building attachments. pprovals: UL Listed ( " - " rod size) and
NAAMS Standards Compliant Power Clamp Cylinder ø50, ø63
NORMTON NMS Standards ompliant Power lamp ylinder ø5, ø6 Weight reduced by up to 8% luminum body with greatly reduced weight Suitable for robot material handling ore size KZ2N a New KZN-X2742 Reduction
PHD Manufacturing, Inc.
4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most
ClearSpan Curtain Tube Support System with Electric Drive Motor (300w)
ClearSpan Curtain Tube Support System with Electric Drive Motor (300w) TTENTION: This guide describes the assembly and installation of roll-up curtains. The design flexibility of these curtain systems
Cable Tray and Accessories
Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series
PORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT
Page 1 of 7 PORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT Thank you for purchasing our product! Please read these instructions and follow them step by step. * STEP 1. Separate and group like
PRODUCT MODEL AND KIT NUMBERS
IV. T PARTS DIAGRAMS AND LISTS - TABLE OF CONTENTS- his chapter contains parts diagrams and parts lists for the RICON R1209 Six-Way Power Seat Base. The exploded view of each major lift assembly shows
Series 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple
Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler Market Keeping the art of distribution simple Victaulic Fittings, Couplings, Valves & Sprinkler Heads for the Fire Sprinkler
SECTION 8 SAMPLE EXAMPLE
SECTON 8 SMPLE EXMPLE PROBLEM #1: hospital facility in California is located in Seismic Zone 4, 5 km from a Seismic Source Type. The soil prile in the region is Type S D. The hospital building is a 6-story,
CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - Heavy Duty Trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - Heavy Duty Trays PRODUCT INFORMTION Table of Contents Heavy Duty cable trays S235 - S240... Pgs 4-5 Heavy Duty cable trays 8 - S438... Pgs 6-7
CTSCL-10. Steel Cable Ladder Cable Support Systems
TSL-10 Steel able Ladder able Support Systems Tray onstruction I-Beam Side Rails ooper B-Line s I-Beam siderails are an integral part of all 2, 3, 4, and 5 series ladder trays. The I-Beam is ideal for
CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CTLOGUE Pipe Supports REGISTERED COMPNY MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY Who we are Founded in 2005 by Directors Hayden Froggatt
Prices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are
COMLIN ISOLATION PRODUCTS
OMLIN ISOLTION PROUTS omlin is a family of elastomeric materials developed over a number of years to meet the arduous and very specific requirements of the process pipework engineer. 1 2 4 5 6 The primary
Hi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
NEW All Biomass Chimney components are available in matte black. Just add "B" to the end of the part numbers you are ordering.
Type L iomass himney For use with biomass fuels such as pellet, corn, wheat or other grassy and woody plants as specified by appliance manufacturers. Tested and Listed to UL641 Pipe and fittings in 3 and
Housing Coating: Orange enamel. Hot dipped galvanized. Optional Bolts/Nuts: (Available in imperial size bolts and nuts only.)
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS The patented Style 107H rigid coupling joins 8"/50 200 standard roll grooved and cut grooved steel pipe.* The joint is assembled without disassembling the bolts,
How to use this file...(installation Instruction Sheets)
How to use this file...(installation Instruction Sheets) Instructions for Print Vendors (Paper Manuals) Paper: * Finish Size is 8-1/2 x 11 * ody 50 lbs brilliant white offset or equivalent. Press: indery:
Chicago Metallic 200 Snap Grid 15/16
Part of The ROCKWOOL Group Chicago Metallic 200 Snap Grid 15/16 coustical ceiling suspension system Ideal for: Retail, classrooms, general interiors. Performance Properties: -Intermediate and heavy duty
The obvious choice in piping cushion clamp assemblies since 1966
The obvious choice in piping clamp assemblies since 1966 TM INTRODUCTION ydra-zorb Co. has been the leader in the strut mounted clamp market for over 40 years, offering a wide variety of solutions when
STOP---READ THIS FIRST!
STOP---READ THIS FIRST! **Read These Entire Instructions Before Starting Anything** 2009-2014 FORD F-150 6.5 LIFT KIT LIFT KIT INSTRUCTIONS (PART# 57000 & #57050) NOTE: * The factory wheels and tires WILL
INSTALLATION INSTRUCTIONS JEEP WRANGLER PART# 1050 /
INSTALLATION INSTRUCTIONS 2007-12 JEEP WRANGLER PART# 1050 / 1050-2 PARTS LIST: Qty Description Qty Description 1 Aries Grill guard 10 12mm Lock washers 1 Driver/left mounting bracket 10 12mm Hex nuts
FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME.
FIRE PROTECTION EQUIPMENT 2017 DATA SHEETS BSP FIRE RESERVES THE RIGHT TO ALTER INFORMATION CONTAINED IN THIS CATALOGUE AT ANY TIME. DATA SHEET INDEX 36m x 19mm FIRE HOSE REEL RISER INSTALLATION DETAIL
Honda Ridgeline
INSTLLTION INSTRUCTIONS FOR PRT 99-7870 99-7870G/99-7870T KIT FETURES DIN Head Unit Provision With Pocket ISO DIN Head Unit Provision With Pocket Painted To Match Factory Dash: G = GRY, T= TN WIRING ND
Performa Mesh Trays. Flexible solution for the routing of cables
Flexible solution for the routing of cables Solutions for each application Performa is one of the most flexible solutions on the market for the routing of cables in light duty and medium duty installations.
Slim profile steel system for doors and windows
Slim profile steel system for doors and windows 2 TABS thermal insulation system 3 Window and door variants 5 References 15 Overview of products and items 39 The latest information and technical descriptions
Welded Outlet Fittings For Fire Protection & Other Low Pressure Piping Systems
Welded Fittings For Fire Protection & Other Low Pressure Piping Systems SPF Welded Fittings offer the user a high strength, low cost forged threaded and grooved line of fittings specifically designed and
QuickVic Rigid Coupling for Steel. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE GROOVED COUPLINGS
H ONL. SEE PAGE 4 FOR DETAILS. The patented Style 107 rigid coupling joins 12"/50 300 standard roll grooved and cut grooved steel pipe. The joint is assembled without disassembling the bolts, nuts, gasket
1/2 Ton Tahoe/Suburban/Yukon/Avalanche 4wd Part #: Rev
Rear Coil Spring Kit 1/2 Ton Tahoe/Suburban/Yukon/Avalanche 4wd 00-06 Part #: 021608 Rev. 040116 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web/live chat: www.bds-suspension.com. E-mail:
MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid
MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid Being first is good, being smart is better, being both is Simply the Best! 1 PRODUCT PORTFOLIO Oglaend System offer a broad range of cable support systems
U.S. PATENT NO.: US 7,765,771 TECHNICAL GUIDE SUPERIOR ENGINEERED FLOOR FRAMING SYSTEM
U.S. PATENT NO.: US 7,765,771 TECHNICAL GUIDE SUPERIOR ENGINEERED FLOOR FRAMING SYSTEM SUPERIOR ENGINEERED JOIST SYSTEMS JoistRite is a specially designed, patented, cold-formed steel section that has
GENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PRTS INSTLLTION INSTRUCTIONS DESCRIPTION: PPLICTION: PRT NUMBER: KIT CONTENTS: Side Window Deflector Quest (2011) H0800 1J00 Item Qty. 1 B 1 C 1 D 1 E 4 F 4 G 1 Part Description Side Window Deflector
Brackets. B (304.8) BRACKET Uniform Loading 900 Lbs. (4.00 kn) Safety Factor of 2.5 Standard finishes: ZN, GRN Wt./C 260 Lbs. (117.
B187 BRCKET Uniform Loading 1450 Lbs. (6.45 kn) Hole Spacing on Bracket Top 5 5 /1 (150.8) Center to Center t./c 193 Lbs. (87.5 kg) 2 1 / B188 BRCKET Uniform Loading 1080 Lbs. (4.80 kn) Hole Spacing on
Electrical and Mechanical Supports Systems
Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional
2010 Current Ford Raptor Lower Control Arm Installation Instructions
PREPARATION 2010 Current Ford Raptor Lower Control Arm Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We
4412HS Wway 4X4X12 N1 HC Lay-In. Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 ax: 936-560-4685 4412S Wway 4X4X12 N1 Lay-In ooper -Line/able Tray atalog Number Manufacturer Description Weight per unit Product ategory
PRODUCT UPDATE. Product Update Bulletin Title: CASE IH 10 Series Jackshaft Mount update. Models Affected: CASE IH AFX
PRODUT UPDAT Title: A IH 10 eries Jackshaft Mount update Models Affected: A IH AFX 7010-8010 Date: ept 10, 2015 Problem: 1. Jackshaft twists under load causing belt failure. 2. Redekop jackshaft interferes
Ford F150/Raptor & F150 Lower Control Arm Installation Instructions
2009-2010 Ford F150/Raptor & 2015-2017 F150 Lower Control Arm Installation Instructions PREPARATION 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency
INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Mazda
INSTLLTION INSTRUTIONS FOR PRT 99-7504 99-7504 KIT FETURES DIN Mount Radio Provision with Pocket ISO Mount Radio Provision with Pocket onus Display Replacement Pocket Retains Factory Display For utomatic
INSTALLATION INSTRUCTIONS FOR TOYOTA TACOMA 4 X 4 AND PRERUNNER 3" SUSPENSION LIFT KIT PART NUMBER 425 (Patent Pending)
INSTALLATION INSTRUCTIONS FOR 1995-2002 TOYOTA TACOMA 4 X 4 AND PRERUNNER 3" SUSPENSION LIFT KIT PART NUMBER 425 (Patent Pending) WARNING!!! READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE PROCEEDING. MAKE
APPLICATIONS FORD MUSTANG CH KIT FEATURES KIT COMPONENTS (NON-NAV MODELS)
INSTLLTION INSTRUCTIONS FOR PRT 99-8CH INSTLLTION INSTRUCTIONS FOR PRT 99-8CH KIT FETURES KIT COMPONENTS PPLICTIONS FORD MUSTNG 00-99-8CH DIN Head unit provisions with pocket ISO DIN Head unit provision
INDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
Ma e...te.r: ADJUSTABLE HOUSE STUMPS
ADJUSTABLE HOUSE STUMPS Stronger Easier Faster Ma e...te.r: --, -'-...,.--_ ADJUSTABLE HOUSE STUMPS Stronger Easier Faster I " I " I Stump --117-- 1 1. -- Adjustable Height Top... Al, --... -,. :,½ -,e
Puddle/Rock Light Kit
Puddle/Rock Light Kit Installation Manual: for Jeep JK 2 and 4 door 2007-2018 81901 2 light / 81904 dd on Kit - - 2 Light kit 2 Light dd-on Primary Light locations Light installed on Frame 1 x Controller
UNEQUAL FLANGE RACK ACCESSORIES
CUSTOM CBINETS & RCKS Products for Custom Installation Solutions www.custcab.com UNEQUL FLNGE RCK CCESSORIES Custom Cabinets & Racks offers a large range of accessories to custom tailor UEF equipment racks
Product Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
STANDARD PRODUCTS CATALOGUE Components for Lighting Columns, Sign Posts, CCTV & Power Transmission Poles
STNDRD PRODUCTS CTLOGUE Components for Lighting Columns, Sign Posts, CCTV & Power Transmission Poles Issue 9 Jan 2014 The Regent Engineering Co. (Walsall) Ltd - Salisbury Street - Darlaston - Wednesbury
3.3. DIRECT REPLACEMENT PRODUCTS Caterpillar Style - Mining Products
3.3 IRET REPLEMENT PROUTS aterpillar Style - Mining Products Teeth for mining machines aterpillar Style Teeth at Tooth REPLEMENT TEETH FOR EXVTORS N LOERS TOOTH SERIES REFERENE HRTS Type 2 Long Type 4
LEADING U.S.A. MANUFACTURER OF FORGED INDUSTRIAL HARDWARE AND CUSTOM FORGINGS
ommitted to Quality and Total ustomer Satisfaction WHO WE RE LEDING U.S.. MNUFTURER OF FORGED INDUSTRIL HRDWRE ND USTOM FORGINGS MISSION STTEMENT The ustomer Is First Ken Forging, Inc. is committed to
Manufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
Installation, Operation, & Maintenance Manual
Installation, Operation, & Maintenance Manual IMPORTANT! DO NOT DESTROY Ceiling Mounted Steel Work Station Bridge Crane and Monorail Gorbel Customer Order No. / Serial No. Gorbel Dealer Date Month Year
Toyota Tacoma TB TG
INSTLLTION INSTRUTIONS FOR PRT 99-84 KIT FETURES PPLITIONS Toyota Tacoma 005-009 99-84T 99-84TG DIN Head Unit Provision With Pocket ISO DIN Head Unit Provision With Pocket Double DIN Head Unit Provision
Section A Busway
Section 8 800 5000 usway usway atalog Numbering System Section 8 800 5000 usway usway atalog Numbering System atalog numbers are composed of two basic parts the prefix (as below), plus the suffix of each
2015 MacroAir Technologies Toll Free: Fax:
2015 Macroir Technologies Toll Free: 866 668 3247 Fax: 909 890 2313 www.macroairfans.com 1 Table of Contents Caution & Safety... 2 Fusing Chart... 4 Fan Placement... 5 Fan Clearance - Rapid Mount Industrial...
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
EZTray. Cable Management Made Easy
EZTray Cable Management Made Easy PRESENTATION Introduction:.................................. 3 EZ Tray: The Tray That Saves You Time!.............. 4-5 EZ Tray: The Innovative Cable Management Solution....
Designer Casters Capacities to 175 lbs.
Capacities to 175 lbs. High Style casters for use on seating, business machines, or institutional equipment. Meets or exceeds IFM durability standards. Hundreds of combinations of bodies, attachments,
Our hangers and supports can be found all over the world!
HISTORY Our roots can be traced to the mid-800 s and to the founding father of our company, rederick J. Grinnell - a time when blacksmiths used their hands to form steel into usable hanger products. Today
Q-LINE SHELVING Shelves
Shelves BOX FORM SHELVES SOLID SHELVES Punched on 1 1 /2" centers for optional bin dividers (BD-ddhh). PERFORATED SHELVES SHELF INFORMATION (Pertains to all shelves on this page.) All shelves are Box Beam
Installation, Operation, & Maintenance Manual
Installation, Operation, & Maintenance Manual IMPORTANT! DO NOT DESTROY Free Standing Steel Work Station Bridge Crane Gorbel Customer Order No. / Serial No. Gorbel Dealer Date Month Year This page intentionally