MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid

Transcription

1 MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid Being first is good, being smart is better, being both is Simply the Best! 1

2 PRODUCT PORTFOLIO Oglaend System offer a broad range of cable support systems for all applications, e.g. cabie Iadders, cable trays, junction box racks, tubing clamps, cable cleats, heating cables, control systems etc. If you need further information, please do not hesitate to contact us! Company presentation Download our latest version of product catalogues from: 2

3 Discipline guide: MultiGrid Support System Electro / Instrument / Telecom HVAC Piping SYMBOLS FOR MATERIAL TYPES: PG = Pre galvanized steel 20 my zink HDG = Hot Dip Galvanized NS/ISO 1461* SS = Stainless Steel AISI 316L** AL = Aluminium 5052 H22/H32 *) Steel quality for HDG: Steel grade EN Grade DC01 **) Steel quality for SS: EN Other material qualities on request. SYMBOLS FOR SCREWS: 2(4) M10x25 2 M10x60 1 M10x20 2(4) M6x12 6 4x25 This symbol shows type of screw, the number needed and name. For order no. see page 81. SYMBOL EXAMPLES: Expansion bolts 2 pcs. needed. Type M10x60. Locking screws 1 pcs. needed. Type M10x20. Hexagonal screws Minimum 2 pcs. needed. (4) May be used*. Type M6x12. Self tapping screw 6 pcs. needed. Type 4x25. Standard: Screws are included! The number of screws and nuts before the brackets are included when ordering the part. (4) Screws in brackets are NOT included! The number in brackets represents the number of screws that can be fitted to fix the part. These must be ordered separately. Screws NOT Included! SNI: Screws not included. SNI Contents: Subject to minor changes without notice. Check our website for latest issues. Catalogue Portfolio 2 Explanation of symbols 3 MultiGrid MultiGrid : Multidiscipline support introduction 4 Starters Starting Brackets (Welded and bolted) 12 Channels Mekano Channels 14 Mekano Channels Data Sheets 18 E, I & T MultiGrid : Electro, Instrumentation & Telecom 56 Angle Brackets and Various Items Brackets for Cable Trays Accessories Earth Jumpers and Lug Splice Connectors for Channels 66 Beam Clamps 68 Instrument and other E, I & T products ETIN tubing clamps, SmartCleat, Lighting, Rack, Instrument stands and equipment plates Ask for our special catalogues: 69 HVAC MultiGrid : HVAC 70 Piping MultiGrid : Pipe Support Standard Details 72 for Ships MultiGrid : Ships 75 for Concrete Multidiscipline for Concrete Constructions Brackets and Channels solutions 76 in FRP Multidiscipline support system in FRP 78 Miscellaneous Products UNO, U-Bolts, Safety-Hooks, El-Insulation details 79 Self-Locking Bolt Sets Bolts & Fixing items 80 Other Perforated Channels 82 Sales Locations 83 Patents and design applications Many of Oglaend System s products are patented or protected by design applications. Mekano Channels Low weight, full system compatibility and considerable torsion strength. Material thickness from 1,5-5 mm. Surface treatment Standard: Pickled and passivated. Study the new patented 125 mm design on page 17. 3

4 MultiGrid Multidiscipline Support MultiGrid is an integrated support system for all main disciplines such as electrical, instrumentation, telecom, HVAC and piping. A key feature is the compatible components which gives you maximum support flexibility across the disciplines. This offers you the freedom to use the system for one or two disciplines, or three or four if you like. The system provides a bolted solution for supporting all disciplines. MultiGrid MultiGrid is the concept name of the entire multidiscipline support system. The MultiGrid concept covers all welded and bolted starter brackets, all channels and frames. Mekano Mekano is the concept name of all channels and fixing accessories for MultiGrid. The Mekano channels are multidiscipline and used for creating support and support frames. All Mekano parts are marked in red in the following system drawings. Discipline Parts Discipline guide MultiGrid Support System for: Electro / Instrument / Telecom HVAC Piping Discipline parts for Electro/Instrument/ Telecom are marked ingreen, HVAC are marked in blue and Piping parts are marked in yellow. 4

5 Our value proposition: Design & Engineering MultiGrid is available in Aveva s PDMS format along with our cable ladders, trays and Intergraph s Smart Plant 3D. See page 74. Modeling using MultiGrid in our PDMS or SP3D catalogues in the detailed design stage can generate Total System Cost savings of up to 35% in an EPC contract. Reduce Total System Cost MultiGrid is designed to optimize all factors contributing to the Total System Cost of a construction project. The Total System Cost can be reduced by up to 30 percent. Cross section data from: MultiGrid included: Material Qualities Supplied in both Stainless Steel AISI 316L and Hot Dip Galvanized Carbon Steel. Other material qualities can be made available on request. Quick Installation Our patented system and product solutions make the installation work very simple and quick. In co-operation with your engineering and installation team we can tailor an installation manual that will secure the quality and the time schedule of the installation. Installation time reduction up to 60 percent. Less Weight & Volume The combination of an integrated support system for all disciplines and patented component solutions generates approximately 30 percent weight savings and 15 percent volume savings. Improved Safety Performance Our system and product solutions reduces the installation time significantly through the constuction phase of an EPC contract. Fewer manhours on site minimize the safety risk. Long Life & Integrity A key feature of MultiGrid is the compatibility of the components across the disciplines. The compatibility and flexibility of this system has been the same for over 30 years. This makes your future investment secure and guarantees that modifications will be straight forward. MultiGrid is compatible with our FRP product line. 5

6 MultiGrid Support System The idea behind MultiGrid is that welding brackets are welded in a square pattern (e.g x 600 cm). These are welded early in the construction phase, and later sandblasted and painted along with the steel structure. The broad range of starter brackets and channels provide excellent support for any discipline. TW! The utmost use of MultiGrid MultiGrid delivers modification flexiblity, and eliminates need for hot work. No shut down required. 1 2 Start by welding starter brackets in a grid pattern before painting the main structure. For increased flexibility a horizontal Mekano channel can be bolted to the starters. MultiGrid bolted support for the future No welding No sand blasting No painting 6

7 Provide lowest possible Total System Cost The broad range of brackets in the MultiGrid system enable support for different loads. The starters should always be selected based on the load capacity needed. The grid pattern is decided through a dialogue between the engineering experts. All grid starters and Mekano channels are fully compatible in order to provide flexibility and deliver lowest possible Total System Cost. Above: Grid system and starters welded & ready for area painting. 3 4 Vertical and horizontal Mekano channels can be bolted to the starters to support any discipline. MultiGrid : Your flexible low weight support system, safe and easy to install and flexible in terms of future modifications. Whatever support you decide, the solution may be preassembled before installation. 7

8 How to get started: Choose starters according to the required load capacity Increased load capacity HOT WORK FOR HOT WORK Welded Starters See full range page Page 12 We offer welded starters for whatever support solution you need! 8 The Mekano Support Channels See the full range page Increased load capacity Choose channels according to the required load capacity

9 Choose starters according to the required load capacity Increased load capacity FOR COLD WORK Bolted Starters See full range page COLD WORK Page 14 We offer bolted starters for whatever support solution you need! The FRP Support Channels combined with FRP or Steel Starters give required load capacity. See page 78. Increased load capacity 9

10 FOR HOT WORK Welded Starters Typical support for Electrical, Instrumentation & HVAC Type states length and recommended channel S-M WB-125-CH50-1* Used with Mekano Channel Type S-M CH50-1 S-M WB-200-CH50-1 Type T Weight Art. no. Art. no. mm kg CS** SS S-M WB-125-CH50-1* 6 0, S-M WB-200-CH *) Welding Brackets L = 125 mm normally not in stock **) CS steel quality: S235JR Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-200-CH100-2T 4 1,6 Contact us S-M WB-300-CH100-2T 4 2,5 Contact us S-M WB-ST-220-CH100-2T 4 1,2 Contact us S-M WB-300-CH100-2T3 4 2,3 Contact us (only for 100-2T3 channel) S-M WB-IN-225-CH100-2T 5 1,4 Contact us *) Check for online updates Used with Mekano Channel Type S-M WB-200-CH T T S-M WB-125-CH100-1* S-M WB-200-CH100-1 S-M WB-300-CH100-1 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-125-CH S-M WB-200-CH S-M WB-300-CH S-M WB-200-CH50-2 Used with Mekano Channel Type S-M CH100-1 S-M CH100-2T *) CS steel quality: S355J2-Y T S-M CH100-1 S-M CH50-2T S-M CH100-2T S-M WB-ST-200- CH S-M CH50-2T S-M WB-ST-220-CH100-2T S-M WB-ST- 175-CH100-3 S-M WB-ST-175-CH100-3 S-M WB-150-CH100-3 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-ST-175-CH S-M WB-150-CH S-M CH100-2T2 S-M CH100-3 Used with Mekano Channel Type S-M CH *) CS steel quality: S235JR

11 Welded Starters Typical for Piping & heavy loads Type states length and recommended channel FOR HOT WORK S-M WB-125-CH S-M WB-200-CH S-M WB-300-CH50-2 S-M WB-ST-200-CH50-2 Type T Weight Art. no. Art. no. mm kg CS* SS S-M WB-125-CH S-M WB-200-CH S-M WB-300-CH S-M WB-ST-250-CH Used with Mekano Channel Type S-M CH50-2 S-M CH60-2 S-M CH50-2T T *) CS steel quality: S355J2-Y S-M WB-CH100-4 S-M WB-PL-CH100-4 S-M WB-FP-CH100-4 Type T Weight Art. no. Art. no. mm kg CS SS S-M WB-CH S-M WB-PL-CH N/A S-M WB-FP-CH N/A Used with Mekano Channel Type S-M CH *) CS steel quality: S355J2-Y05 CS brackets are uncoated and not available in HDG. S-M WB-200-CH100-2T S-M WB-300-CH100-2T3 S-M CH100-2T3 S-M WB-CH100-4 S-M WB-150-CH100-3 S-M CH100-3 S-M CH

12 FOR COLD WORK Bolted Starters Typical support for Electrical, Instrument & HVAC Type states recommended channel Bolted solutions for concrete, see page Used with Mekano Channel Type S-M CH100-1 S-M BS-CH S-M CH100-2T T Type T Weight Art. # Art. no. mm HDG SS S-M BS-CH S-M BC-ST-HD S-M CH M12 bolts S-M BS-CH100-1 S-M CH100-1 S-M BC-240 S-M CH50-2T S-M BS-CH100-4 S-M CH100-2T See page 68 for further details S-M BC-FC (x2) M12 bolts S-M BC-ST-HD S-M BS-CH100-3 Type T Weight Art. # Art. no. mm kg HDG SS S-M BC-ST-HD 4 2,4 N/A S-M BS-CH , Used with Mekano Channel Type S-M CH100-3 S-M CH S-M BC-160 S-M BC-300 Type T Weight Art. no. Art. no. mm kg HDG SS S-M BC-FC S-M BC S-M BC Used with Mekano Channel Type S-M CH50-1 S-M CH50-2 S-M CH50-2T1,5 S-M CH50-2T T 113 S-M BS-CH100-4-B S-M BS-CH100-4-C S-M BS-CH100-4 Type T Weight Art. # Art. no. mm kg HDG* SS S-M BS-CH100-4-C S-M BS-CH100-4-B S-M BS-CH Used with Mekano Channel Type S-M CH *) CS steel quality: S355J2-Y05

13 FOR COLD WORK Bolted Starters Typical for Piping & heavy loads Type states recommended channel S-M BC-CH100-3 S-M BS-CH Type T Weight Art. # Art. no. mm HDG SS S-M BS-CH Used with Mekano Channel Type S-M CH60-2 S-M CH50-2T1.5 S-M CH50-2T2 S-M CH100-2T2 S-M CH100-2T T 100-2T S-M BT-CH100-3 S-M MG-CA See page 68 for further details Type T Weight Art. no. Art. no. mm HDG SS S-M BC-CH S-M BT-CH S-M MG-CA Used with Mekano Channel Type S-M CH100-2T2 S-M CH100-2T3 S-M CH T T Type T Weight Art. no. Art. no. mm kg HDG* SS S-M BS-200-CH100-2T 4 4, S-M BS-300-CH100-2T 4 5, S-M BS-300-CH100-2T3 4 4, (For CH100-2T3 channel) M16 bolts S-M BC-MS-CH100-4 (See Page 63 for details.) Fit-range HE A/B *) CS steel quality: S355J2-Y T T3 Type T Weight Art. # Art. no. mm kg HDG SS S-M BC-MS-CH Used with Mekano Channel Type S-M CH S-M BS-CH60-2 S-M CH60-2 S-M BC-CH100-3 S-M CH100-3 S-M BC-MS-CH100-4 S-M CH

14 Support Channels for Electrical, Instrument & HVAC Electro / Instrument / Telecom HVAC Piping Increased load capacity Mekano 50-1 Mekano 50-2 Mekano Single and Double Single and Double Mekano 50-2T Mekano 100-2T S-M CH50-1 S-M CH50-2 S-M CH100-1 S-M CH50-2T S-M CH100-2T Data: Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m S-M CH S-M CH S-M CH S-M CH50-2T1, S-M CH50-2T Ordering list: S-M CH100-2T Type states width, material Type states width and length Type states width and length Type states width and length thickness and length Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS Type HDG SS Type HDG SS S-M CH S-M CH S-M CH S-M CH50-2T1, S-M CH50-2T S-M CH100-2T Calculation basis Channel material thickness (mm) Channel Type: CH50-1 (1.5) CH50-2 CH100-1 (1.5) CH100-1 (1.5) CH50-2T CH50-2T CH100-2T Double (1.5mm) Single Double (1.5mm) (2mm) (2mm) A E I TE I XE I YE W XP W YP C TP DW = Dead Weight KN = Kilo Newton 14 A E - Effective cross-section area (mm 2 ) I TE - Effective moment of inertia, torsion (mm 4 ) I XE - Effective moment of inertia, bending about X-axis (mm 4 ) I YE - Effective moment of inertia, bending about Y-axis (mm 4 ) W XP - Moment of resistance, bending about X-axis, perforated (mm 3 ) W YP - Moment of resistance, bending about Y-axis, perforated (mm 3 ) C TP - Moment of resistance, torsion, perforated (mm 3 )

15 Support Channels for Piping & heavy loads Electro / Instrument / Telecom HVAC Piping Increased load capacity Mekano 50-2T Mekano 100-2T Mekano 60-2 Double and Single Perforated Mekano Mekano ,5mm 3mm S-M CH50-2T S-M CH100-2T S-M CH60-2* *) Made to order only S-M CH100-3* *) Made to order only S-M CH S-M CH Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m S-M CH50-2T2, S-M CH60-2-A S-M CH S-M CH S-M CH100-2T S-M CH Type states width, material Type states width, material Type states width, material Type states width, material thickness and length thickness and length thickness and length thickness and length Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS Type HDG SS Type HDG SS S-M CH50-2T2, Double perforated S-M CH mm thickness S-M CH100-2T S-M CH60-2-A S-M CH S-M CH Single perforated S-M CH mm thickness S-M CH60-2-B S-M CH S-M CH CH50-2T CH100-2T CH60-2 CH100-3 CH100-4 CH100-4 (2.5mm) (3mm) (6mm) (2.5mm) (3mm) (5mm) Channels are included in Staad.Pro (contact us for library) by Bentley by EDR 15

16 Support Channels for Electrical, Instrument & HVAC Mekano 50-1 Standard length = 3 m. Mekano Other lengths as per your specific material take off requirement (MTO) can be provided as specialty products. T: 1.5 mm T: 1.5 mm Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS S-M CH S-M CH Mekano 100-2T Mekano 50-2T Mekano 50-2 T: 2 mm Art. no. Art. no. Type HDG SS S-M CH100-2T T: 1.5 & 2 mm Art. no. Art. no. Type HDG SS S-M CH50-2T1, S-M CH50-2T T: 1.5 mm Art. no. Art. no. Type HDG SS S-M CH

17 Support Channels for Piping & heavy loads Mekano 50-2T Mekano 60-2* *) Made to order only Mekano 100-2T Mekano 125-2T NEW! NEW! T: 2.5 mm Art. no. Art. no. Type HDG S S-M CH50-2T2, T: 6 mm A B Art. no. Art. no. Type HDG SS S-M CH60-2-A S-M CH60-2-B T: 3 mm Art. no. Art. no. Type HDG SS S-M CH100-2T T: 5 mm Art. no. Art. no. Type HDG SS S-M CH125-2T Mekano 100-3* *) Made to order only Mekano T: 2.5 mm Art. no. Art. no. Type HDG SS S-M CH S-M CH S-M CH S-M CH T: 3 & 5 mm Art. no. Art. no. Type HDG SS S-M CH S-M CH

18 A guide to standard U-, L-, T- and Cantilever support Choose starters and Channels according to the required load capacity Using Channels: Mekano 50-2 Vertical Mekano 50-2 Horizontal Mekano Horizontal For complete spesifications and ordering list see data sheet page U: 01 U: 02 CH50-2-1,5 CH50-2T2 p 19 p 20 CH100-1 p 19 up to: p 55 Mekano 50-2T-1,5 Vertical Mekano 50-2T-1,5 Horizontal Mekano Horizontal U: 03 CH50-2T1,5 U: 05 CH50-2T1,5 C: 01 CH50-2T1,5 p 21 p 23 CH100-1 p 41 Mekano 50-2T2 Vertical Mekano 50-2T2 Horizontal Mekano Horizontal U: 04 CH50-2T2 p 22 U: 06 CH50-2T2 p 26 CH100-1 U: 07 CH50-2T1,5 p 24 CH100-1 U: 08 CH50-2T1,5 p 25 CH100-1 C: 02 CH50-2T2 p 42 Mekano 100-2T-2 Vertical Mekano 100-2T-2 Horizontal U: 09 CH100-2T2 U: 10 CH100-2T2 U: 11 CH100-2T2 L: 01 CH100-2T2 C: 03 CH100-2T2 T: 01 CH100-2T2 p 27 p 28 p 29 p 36 p 43 p 50 Mekano 50-2T2,5 Vertical Mekano 50-2T2,5 Horizontal U: 12 CH50-2T2,5 C: 04 CH50-2T2,5 p 30 p 44 Mekano 60-2 Vertical Mekano 60-2 Horizontal U: 13 CH60-2 C: 05 CH60-2 T: 02 CH60-2 p 31 p 45 p 51 Mekano 100-2T3 Vertical Mekano 100-2T3 Horizontal U: 15 CH100-2T3 L: 03 CH100-2T3 C: 07 CH100-2T3 T: 04 CH100-2T3 p 33 p 38 p 47 p 53 Mekano Vertical Mekano Horizontal U: 14 L: 02 CH ,5 CH ,5 C: 06 CH ,5 T: 03 CH100-3 p 32 p 37 p 46 p 52 Mekano Vertical Mekano Horizontal U: 16 CH U: 17 CH p 34 p 35 L: 04 CH C: 08 CH L: 05 CH C: 09 p 30 p 40 CH p 48 p 49 T: 05 CH p 54 p 55 T: 06 CH

19 U-SUPPORT: CH ,5mm MG-U: 01 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (mm) Weight (kg) Art # HDG Art # SS # of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2 (*kg/m) 1,5 1,7* C) Angle Bracket S-M AB 55x , D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2 (vertical) & CH 50-2 (horizontal) Height(mm) Width(mm) Capacity Capacity Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH50-2-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 19

20 U-SUPPORT: CH ,5mm & CH ,5mm MG-U: 02 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2(*kg/m) 1,5 1,7* C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2 (v) & CH (h) Height(mm) Width(mm) Capacity Capacity Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH ,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 20

21 U-SUPPORT: CH 50-2T-1,5mm MG-U: 03 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* C) Angle Bracket S-M AB 55x , D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 50-2T1,5 (h) Height(mm) Width(mm) Capacity Capacity Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH50-2T-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 21

22 U-SUPPORT: CH 50-2T-2mm MG-U: 04 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,8* C) Angle Bracket S-M AB 55x , D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T2 (v) & CH 50-2T2 (h) Height(mm) Width(mm) Capacity Capacity Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH50-2T-2 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 22

23 U-SUPPORT: CH 50-2T-1,5mm & CH ,5mm MG-U: 05 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH (h) Height(mm) Width(mm) Capacity Capacity Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH ,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 23

24 U-SUPPORT: CH 50-2T-2mm & CH ,5mm MG-U: 06 A) S-M WB-200-CH mm Height B) C) D) 1,5 mm Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH (h) Height(mm) Width(mm) Capacity Capacity ,5 4, ,6 2, ,3 2, ,5 1,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH ,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 24

25 U-SUPPORT: CH 50-2T-2mm & CH ,5mm MG-U: 07 A) H1 2 mm 1,5 mm S-M WB-200-CH50-2 Height B) C) H1 D) Width Items list: Function Type (.mm) Weight(kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH (h) Height(mm) H1 Width(mm) Capacity Capacity , ,6 3, ,2 2, ,2 1, ,0 1,3 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH ,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 25

26 U-SUPPORT: CH 50-2T-2mm & CH ,5mm MG-U: 08 A) H1 2 mm 1,5 mm S-M WB-200-CH50-2 B) Height H1 C) H1 D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,9* C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* (2) D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH (h) Height(mm) H1 Width(mm) Capacity Capacity , , ,5 1,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. We do not recommend to use channel CH ,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 26

27 U-SUPPORT: CH100-2T-2mm MG-U: 09 A) S-M WB-200-CH100-2T 2 mm Height B) C) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* C) Self Lock Boltset S-M LS-NU-M10x , Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity Capacity Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 27

28 U-SUPPORT: CH100-2T-2mm MG-U: 10 A) H1 2 mm S-M WB-200-CH100-2T Height B) C) H1 Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* C) Self Lock Boltset S-M LS-NU-M10x , Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity Capacity ,8 4, ,4 3, ,4 2, ,2 2, ,0 1,3 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 28

29 U-SUPPORT: CH100-2T-2mm MG-U: 11 A) H1 2 mm S-M WB-200-CH100-2T Height H1 B) C) H1 Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* C) Self Lock Boltset S-M LS-NU-M10x , Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity Capacity ,6 6, ,0 4, ,8 2, ,0 2, ,8 1, ,1 1,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 29

30 U-SUPPORT: CH 50-2T-2,5mm MG-U: 12 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2,5 (*kg/m) 2,5 5,3* C) Angle Bracket S-M AB 55x , D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T2,5 (v) & CH 50-2T2,5 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation a P(y)=70% of capacity load is used to estimate max blast in x-direction. We do not recommend to use channel CH ,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm. 30

31 U-SUPPORT: CH mm MG-U: 13 A) S-M WB-200-CH mm Height B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH60-2 (*kg/m) 6 5,1* C) Angle Bracket S-M AC CH , D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 60-2(v) & CH 60-2(h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 31

32 U-SUPPORT: CH ,5mm MG-U: 14 A) S-M WB-150-CH ,5 mm Height B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH , ** B) Mekano Channel S-M CH100-3 (*kg/m) 2,5 5,3* C) Splice Connector L S-M SC-L-CH , D) Self Lock Boltset S-M LS-NU-M10x , E) End Protection A-CH100-3 EP 2 0, **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel & CH100-3 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 32

33 U-SUPPORT: CH 100-2T-3mm MG-U: 15 A) S-M WB-200-CH100-2T 3 mm Height B) C) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* C) Self Lock Boltset S-M LS-NU-M10x , Load Capacity: Mekano Channel CH 100-2T3 & CH100-2T3 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 33

34 U-SUPPORT: CH mm MG-U: 18 A) Height 3 mm S-M WB-CH100-4 B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 3 8,3* C) Splice Connector L S-M SC-L-CH , D) Self Lock Boltset S-M HE-NU-M10x ,05 N/A **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH & CH Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 34

35 U-SUPPORT: CH mm MG-U: 19 A) Height 5 mm S-M WB-CH100-4 B) C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 5 13,6* C) Splice Connector L S-M SC-L-CH , D) Self Lock Boltset S-M HE-NU-M10x ,05 N/A **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH & CH Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on r = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on r = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation r=450n/mm². 35

36 L-SUPPORT: CH100-2T-2mm MG-L: 01 A) S-M WS-300-CH100-2T 2 mm Height B) C) D) Items list: Width Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WS-300-CH100-2T 4 2,5 Contact us B) Mekano Channel S-M CH1002T2 (*kg/m) 2 3,8* C) Self Lock Boltset S-M LS-NU-M10x , D) Gusset Plate S-M GP-CH-100-2T 5 1, Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity DW Capacity ,7 2, ,4 1, ,3 1,6 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 36

37 L-SUPPORT: CH ,5mm MG-L: 02 A) S-M WB-150-CH ,5 mm Height B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH , ** B) Mekano Channel S-M CH100-3 (*kg/m) 2,5 5,7* C) Splice Connector L S-M SC-L-CH , D) Self Lock Boltset S-M LS-NU-M10x , E) End Protection A-CH100-3 EP 2 0, **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH ,5(v) & CH ,5(h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,8 4,0 1, ,7 0,9 8 5, ,3 1,7 0,6 5 5,4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 37

38 L-SUPPORT: CH100-2T-3mm MG-L: 03 A) S-M WB-300-CH100-2T 3 mm Height B) C) D) Items list: Width Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-300-CH100-2T 4 2,5 Contact us B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* C) Self Lock Boltset S-M LS-NU-M10x , D) Gusset Plate S-M GP-CH-100-2T 5 1, Mekano Channel CH100-2T3 (v) & CH100-2T3 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,1 1, ,6 0, ,5 1,7 0, Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 38

39 L-SUPPORT: CH mm MG-L: 04 A) Height 3 mm S-M WB-CH100-4 B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M-CH (*kg/m) 3 8,5* C) Splice Connector L S-M SC-L-CH , D) Self Lock Boltset S-M HE-NU-M10x ,05 N/A E) End Protection A-CH100-4 EP Plastic: PS **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH (v) & CH (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,5 1, Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 39

40 L-SUPPORT: CH mm MG-L: 05 A) Height 3 mm S-M WB-CH100-4 B) C) D) E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 3 13,7* C) Splice Connector L S-M SC-L-CH , D) Self Lock Boltset S-M HE-NU-M10x ,05 N/A E) End Protection A-CH100-4 EP Plastic: PS **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH (v) & CH (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast , , ,5 5,4 1, Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 40

41 CANTILEVER SUPPORT: CH 50-2T-1,5mm MG-C: 01 A) S-M WB-200-CH50-2 B) C) Width 1.5 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T (*kg/m) 1,5 1,4* C) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T1,5 Lenght(mm) Capacity DW Piping 200 1, ,8 0, ,5 0,2 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 41

42 CANTILEVER SUPPORT: CH 50-2T-2mm MG-C: 02 A) B) S-M WB-200-CH50-2 C) Width 1.5 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2 (*kg/m) 2 1,7* C) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 50-2T2 Lenght(mm) Capacity DW Piping 200 2,0 0, ,0 0, ,7 0,21 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 42

43 CANTILEVER SUPPORT: CH100-2T-2mm MG-C: 03 A) B) S-M WB-IN-225-CH100-2T C) Width 2 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-IN-225-CH100-2T 5 1,4 Contact us B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* C) Self Lock Boltset S-M LS-NU-M10x , Load Capacity: Mekano Channel CH100-2T2 Lenght(mm) Capacity DW Piping 200 7,0 2, ,6 1, ,3 0, ,8 0, ,4 0,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Max loads Y(KN) and X(KN) are non-concurrent loads. 43

44 CANTILEVER SUPPORT: CH50-2T-2,5mm MG-C: 04 S-M WB-200-CH50-2 A) B) C) Width 2.5 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH50-2T2,5(*kg/m) 2,5 5,3* C) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH50-2T2,5 Lenght(mm) Capacity DW Piping Piping Blast Blast 200 2,4 1,9 0,6 5,5 10, ,2 0,9 0,3 2,5 10, ,8 0,6 0,2 1,8 10,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 44

45 CANTILEVER SUPPORT: CH60-2-6mm MG-C: 05 S-M WB-200-CH50-2 A) B) C) Width 6 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* C) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH60-2 Width(mm) Capacity DW Piping Piping Blast Blast 200 4,4 3,4 1,1 10,5 10, ,2 1,7 0,6 5,5 10, ,5 1,1 0,4 3,5 10,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 45

46 CANTILEVER SUPPORT: CH ,5mm MG-C: 06 A) S-M WB-150-CH100-3 B) C) Width 2,5 mm D) Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH , ** B) Mekano Channel S-M CH ,5 (*kg/m) 2,5 5,7* C) Self Lock Boltset S-M LS-NU-M10x , D) End Protection A-CH100-3 EP 2 0, **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH ,5 Width(mm) Capacity DW Piping Piping Blast Blast ,0 9,0 3, ,0 4,2 1, ,3 3,2 1, ,3 2,7 0,8 7, ,2 2,0 0, Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 46

47 CANTILEVER SUPPORT: CH100-2T-3mm MG-C: 07 S-M WB-IN-225-CH100-2T A) B) 3 mm C) Width 3 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-IN-225-CH100-2T 5 1,4 Contact us B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 3,8* C) Self Lock Boltset S-M LS-NU-M10x , Load Capacity: Mekano Channel CH100-2T3 Width(mm) Capacity DW Piping Piping Blast Blast ,0 8,0 2,6 25,0 25, ,4 4,0 1,3 12,2 25, ,6 2,7 0,9 8,0 25, ,7 2,0 0,7 6,0 25, ,1 1,6 0,6 5,0 25,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 47

48 CANTILEVER SUPPORT: CH mm MG-C: 08 S-M WB-CH100-4 A) B) C) Width 3 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 3 8,5* C) Self Lock Boltset S-M HE-NU-M10x ,05 N/A D) End Protection A-CH100-4 EP Plastic: PS **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH Width(mm) Capacity DW Piping Piping Blast Blast ,0 8,0 2,6 25,0 25, ,4 4,0 1,3 12,2 25, ,6 2,7 0,9 8,0 25, ,7 2,0 0,7 6,0 25, ,1 1,6 0,6 5,0 25,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 48

49 CANTILEVER SUPPORT: CH mm MG-C: 09 S-M WB-CH100-4 A) B) C) Width 3 mm Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 3 8,5* C) Self Lock Boltset S-M HE-NU-M10x ,05 N/A D) End Protection A-CH100-4 EP Plastic: PS **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH Width(mm) Capacity DW Piping Piping Blast Blast ,0 25,0 8,3 75,0 50, ,2 14,0 4,3 50,0 50, ,0 9,6 3,2 30,0 50, ,5 7,2 2,4 22,0 50, ,6 5,8 1,8 18,0 50,0 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². 49

50 T-SUPPORT: CH100-2T-2mm MG-T: 01 A) 2 mm S-M WB-200-CH100-2T B) Height C) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* C) Self Lock Boltset S-M LS-NU-M10x , Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h) Height(mm) Width(mm) Capacity DW Piping ,10 1, ,30 0, ,60 0, ,20 0,4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. Please note that the capacity calculation for T-support is for even loading on both sides. Max loads Y(KN) and X(KN) are non-concurrent loads. 50

51 T-SUPPORT: CH mm MG-T: 02 A) S-M WB-200-CH mm B) Height C) D) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH , ** B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* C) Angle Bracket S-M AC CH , D) Self Lock Boltset S-M LS-NU-M10x , **) S-M WB-200-CH50-2 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH 60-2 & CH 60-2 Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,00 2,10 0,70 6,00 2, ,50 1,20 0,40 3,90 1, ,00 0,75 0,25 2,40 0, ,75 0,50 0,13 1,80 0,60 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 51

52 T-SUPPORT: CH ,5mm MG-T: 03 A) S-M WB-150-CH100-3 B) Height 2.5 mm C) D) E) Width Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-150-CH , ** B) Mekano Channel S-M CH ,5 (*kg/m) 2,5 5,7* C) Splice Connector T S-M SC-T-CH , D) Self Lock Boltset S-M LS-NU-M10x , E) End Protection A-CH100-3 EP 2 0, **) S-M WB-150-CH100-3 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH ,5(v) & CH ,5(h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,5 2,7 0,9 4,9 1, ,5 0,8 4,9 1, ,8 2,2 0,7 4,9 1, ,2 1,6 0,5 4,8 1,6 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 52

53 T-SUPPORT: CH100-2T-3mm MG-T: 04 A) B) 3 mm S-M WB-200-CH100-2T C) Height Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* C) Self Lock Boltset S-M LS-NU-M10x , Mekano Channel CH100-2T3 (v) & CH100-2T3 (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,9 4,7 1,4 7,5 2, ,6 2,7 0,9 7,5 2, ,4 1,8 0, ,8 1,3 0,43 4,5 1,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 53

54 T-SUPPORT: CH mm MG-T: 05 A) S-M WB-CH100-4 B) 3 mm C) D) Height E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 3 8,5* C) Splice Connector T S-M SC-T-CH D) Self Lock Boltset S-M HE-NU-M10x ,05 N/A E) End Protection A-CH100-4 EP Plastic: PS **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH (v) & CH (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast , , , , ,7 4,2 1,4 10,5 3, ,25 3,6 1,2 10,5 3,4 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 54

55 T-SUPPORT: CH mm MG-T: 06 A) S-M WB-CH100-4 B) 3 mm C) D) Height E) Width Items list: Function Type (mm) Weight SS (kg) Art # HDG Art # SS #of Parts A) Welded Starter S-M WB-CH ** B) Mekano Channel S-M CH (*kg/m) 3 13,7* C) Splice Connector T S-M SC-T-CH , D) Self Lock Boltset S-M HE-NU-M10x ,05 N/A E) End Protection A-CH100-4 EP Plastic: PS **) S-M WB-CH100-4 is delivered in carbon steel quality. Load Capacity: Mekano Channel CH (v) & CH (h) Height(mm) Width(mm) Capacity DW Piping Piping Blast Blast ,9 3,3 17, ,8 9,6 3,2 17, ,6 6,6 2,3 17, ,5 4,9 1,6 16 5,5 Norsk Standard code NS3472/Eurocode 03/Norsok. Capacity (KN) is calculated using point load on the centre of the horizontal support. Piping: ULS Ultimate Limit state Load factor 1,3 Material factor 1,15 on p = 210N/mm². Other disciplines: SLS -. Load factor 1,0 Material factor 1,15 on p = 210N/mm². Deflection allowance piping: L/300 or 3 mm. Most conservative used. Deflection allowance other disciplines: L/200 Section properties are based on effective values reduced for perforations. For blast calculation p=450n/mm². Please note that the capacity calculation for T-support is for even loading on both sides. 55

56 Mekano 50-1 Mekano 50-2 Mekano Order no. see also page HOT WORK Page 12 COLD WORK Page 14 Typical use for supporting E, I & T and HVAC 2 M10x20 40 Holes 11 x Material thickness: 4 mm. Angle Bracket Fit all channels. See also page 64. HDG SS Weight Type Art. no. Art. no. SS (kg) S-M AB 55x M10x20 2(4) M10x Fits CH50-2 CH50-2T Fits CH50-1 Splice Connectors for channels For Mekano channel S-M CH50-2 and CH50-1 HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-CH S-M SC-CH Fits CH100-1 Splice Connectors for channels For Mekano channel S-M CH (6-8) M10x20 Without notches. HDG SS Weight Type Art. no. Art. no. SS (kg) OE100 SC-NO ,3 OE100 SC* *) Without notches. 56

57 Mekano 50-2T Mekano 100-2T Mekano 125-2T NEW! New Channels triangle shaped channels in the marketplace. Mekano 50-2T and 100-2T are the first perforated Mekano 50-2T and 100-2T are lightweight channel system with improved load capacity and torsion strength. NEW: Mekano 125-2T is the newest addition to the patented family of triangular perforated channels. It is suitable for heavier loads and for piping. Please contact us for deals. Standard locking bolts M10x20 are to be used. The large holes on one side of the triangle make the channel easy to assemble, much like a regular angle channel. The Mekano 50-2T and 100-2T complete the MultiGrid system, offering even more opportunities in order to optimize our system to fit your requirements. Patented design Compare the load data for Mekano 50-2T and 100-2Twith other channels! Page The large holes make it easy to bolt other parts to the channel. Two Mekano 100-2T: Because of the large holes the channels are easy to assemble. Nuts and bolts fit through slots for easy fastening 32 mm Ø 22 Mekano 50-2T bolted to Mekano The bolts can be mounted from both sides. Mekano 100-2T bolted to Mekano The bolts can be mounted from both sides. Use 1 part Splice Connectors for channel HDG SS Weight Type Art. no Art. no. SS (kg) S-M SC

58 Mekano 60-2 Order no. see page 15. Angle Connector HDG SS Weight Type Art. no. Art. no. SS (kg) S-M AC-CH Beam Clamp-set for Main & Secondary steel HDG SS Weight Type Art. no. Art. no. SS (kg) S-M BC-CH Slide-step 25mm to fit. Connection L60 to existing HE Main Steel (when drilling is prohibited) Preferred solution where the area directly underneath is occupied. Mekano 60-2 solutions on Ula (BP Norway) Mekano 60-2 solutions on Ula (BP Norway) 58

59 HOT WORK COLD WORK Mekano 60-2 & Details Page 12 Page 14 Connection L60 to Deck Stringers Connection L60 to RHS (when drilling is prohibited) Please ask for our MultiGrid Site Support Solution for Small Bore Pipes (Best Practice / Work Instruction) and our Pipe Support Standard Parts catalogue or download from 59

60 Mekano Order no. see page M10x20 Supplied in pairs Splice Connectors for HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-CH MultiGrid Bracing Equipment The unique flexibility in MultiGrid makes bracing a simple bolt job. Various standard brackets in combination with channels or threaded rods are tailored to fit the requirements. Ask for alternatives. Threaded Rod Type Art. no. SS S-M TR S-M TR HINGE OE100-HH Art. no SS Nyhamna Power Station Aukra, Norway In 2006 it was decided that Norwegian main grid owner Statnett was to build two gas turbine driven power plants on the north-west coast of Norway. The three production units were expected to produce 150 MW. Late 2007 Oglaend System was contacted by E&I Contractor Siemens Installation, and based on their sketch our R&D department developed a solution including MultiGrid support, cable ladders Type OE, trefoil cable cleats Type SmartCleat and earth links. The Mekano channel along with accessories was the best choice for the 4.5 meter tall towers. The channels were easy to handle and assemble due to the light weight of the 2.5 mm thick non-magnetic AISI 316 L stainless steel. Even if none of the items exceeded the maximum man-handling weight of 25 kg the final construction was firm and strong. 60

61 HOT WORK COLD WORK Mekano & Details Page 12 Page Channel Bracket S-M CB SS HDG Max load 600 kg 350 Channel Bracket S-M CB SS HDG Max load 500 kg 500 Channel Bracket S-M CB SS HDG Max load 500 kg Splice Connector L 4 mm S-M SC-L-CH SS HDG Patented, study the Nonie principle below Splice Connector T 4mm S-M SC-T-CH SS HDG End Protection A-CH100-3 EP SS HDG Splice Connector U 4 mm S-M SC-U-CH SS HDG Goal post Bolted starter bracket S-M BS-CH SS HDG The Nonie-principle = Enhanced Flexibility Oglaend System s patented Nonie-principle enables adjustments in step of 5 mm, utilizing the hole combinations between the Mekano Channel and the L-connector. The slots in combination with our self-lock bolt-sets ensure precise levels and eliminates risk of sliding. CH100-3 wth CC 25 mm against Splice L with CC 20mm bolt-holes = 5mm steps Square slots (10.3x10.3mm) for CH CC 25 mm CC 100 CC 100 CC 20 CC mm +5 mm 0 mm 61

62 Mekano Order no. see page 15. Splice Connector T Type: S-M SC-T-CH100-4 Art. No SS SNI 8 x M10x130mm Bracing Connector set for Type: S-M SC-V-CH100-4-A Art.No SS SNI 4 x M10x130mm Plastic End Protection Type: A-CH100-4 EP Art. No. PS60018 How to cut Mekano CH All cutting of profile Mekano to be by 25mm steps. (L1 = Always ending with..00,-..25,-..50 or..75mm) Recommended exstra length for adjustments on site (dim. L): L = round up L1 ~ 25mm and add 25mm = L min. 25 to L max. 50mm. Mekano Cut marking tool Measuring tool. Aid for cutting of Mekano It is important that 90 cuts are done exactly between 2 holes. Cut tolerance: 25mm +0 / -1mm (both sides of cut) Type: S-M CD-CH L Art. No: Example L1= 717mm = ( ~ 25) = 750mm cut Length. - Result L = 33mm CC 25 mm Circle slots (Ø 10.3mm) for CH Notches for positioning L L1 CC 20 NONIE = Simple flexibility. Study the Nonie principle on page

63 HOT WORK COLD WORK Mekano & Details Page 10 Page 12 Bracing Connector for Type: S-M SC-V-CH100-4-B Art. No SS SNI 4 x M10x130mm Splice Connector Type: S-M SC-CH100-5 SS Art. No. SS / HDG Order two to splice one channel SNI 8 x M10x130mm Splice Connector L Type: S-M SC-L-CH L Art.No HDG Art No (NA Stock) Patented, study the Nonie principle page 61. SNI 8 x M10x130mm Bolted Main Steel connection Range: HE240A/B HE1000A/B Fit all sizes from HE240A/B to HE1000A/B (& similar beam with mm flange-width) Splice Connectors for channel HDG SS Weight Type Art. no Art. no. SS (kg) S-M SC-CH To splice connect CH100-4 use 8 through bolts. Type: S-M HE-NU-M10x130. Art. no.: as bolt set with nut. Bolted Starter Type: BC-MS-CH L Art. No Shim plates setup: 20mm = mm shim-plates needed. (Shim Size: 2 a 3, 2 & 1mm) SNI 6 x M16x65 (HE240B) Bolts 6 x M16x65 Mekano CH as alternative starter between stringers Step 1. Plates (110x110x6mm x 2 ) to be welded to stringer. Step 2. CH to be placed and welded to plates. Step 3. Apply masking tape. (Not covering welds!) Minimum clearence 25mm Adjustable by 5mm step sideways 63

64 MultiGrid : Electro, Instrumentation & Telecom Various Angle Brackets fits all channels Also see page 66. Other Fixing Clamps for Ladders and Trays see our product catalogues. Traverse Support Fixed back to back with two bolts M10 giving shear strength pr. bolt: 2000kg 55 Holes 11 x Fits all 11x x35 6x35 Single Kg Safetyfactor = 2 Double Material thickness: 4 mm Material thickness: 3 mm. Fixing Clamps For fastening ladders to brackets and supports. Gives a safe earth connection between ladder and bracket. Type HDG SS Weight Art. no. Art. no. SS (kg) S-M AB 55x OE-FC-A40x33-10/ OE-FC-A40x23-10/ Fits all Material thickness: 3 mm. Fixing Clamp for channel-traverse. Supplied in pairs. HDG SS Weight Type Art. no. Art. no. SS (kg) OE FC-CHM x35 Fixing Clamp for traverse channels HDG SS Weight Type Art. no. Art. no. SS (kg) S-M FC-CH How to use: Fits both Mekano and UNO L H 64 Channel Bracket for LOE, RZE ladders and SPB trays. Type no. indicates ladder width. Safety factor 2. HDG SS Maks last Weight Type H + L Art. no. Art. no. Max. load SS S-M CB kg 0.36 kg S-M CB kg 0.42 kg S-M CB kg 0.48 kg S-M CB kg 0.67 kg S-M CB kg 0.81 kg

65 Choose channels according to the required load capacity. SC-TW 40/390 SC-TW 90/213 SC-TW 40/ Directional adjustors 4 mm 5 mm HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-TW 90/ S-M SC-TW 40/ S-M SC-TW 40/ Channel Bracket Twisted HDG SS Weight Type Art. no. Art. no. SS (kg) S-SPB CB-TW Gives a clean and professional installation with no descenders. Fits all Mekano Channels. 11x11 7x Interface between tray and OE-ladder HDG SS Weight Type Art. no. Art. no. SS (kg) S-OE/SPB-RF-IF S-OE/SPB-RF-IF

66 Angle Brackets Fit all channels HDG SS Weight Type Art. no. Art. no. SS (kg) 1 M6x12 Material thickness: 5 mm. 25 Holes 11 x 20 7 x Holes 7 x S-M AB 50x50-10/ S-M AB 50x Material thickness: 4 mm. 1 M6x12 +1 M10x20 Material thickness: 4 mm. 40 Holes 11 x 35 7 x S-M AB 55x55-10/ M10x20 Material thickness: 4 mm. 40 Holes 11 x S-M AB 55x Material thickness: 5 mm M10x20 Holes 11 x x S-M AB 65x80-10/ Material thickness: 5 mm. 2 M10x20 Holes 11 x x S-M AB 65x80-10/12B M10x20 Material thickness: 5 mm. Holes 13 x x S-M AB 65x60-Z M6x12 2 M10x20 Material thickness: 5 mm. To combine 6 and 10mm bolts. 50 Holes 11 x 20 7 x 20 Ø S-M AB 110x120-10/ M10x20 Material thickness: 5 mm x x End piece for Channel S-M CH HDG SS Weight Type Art. no. Art. no. SS (kg) S-M AB 60x60-10/

67 Miscellaneous Items 2 M10x20 2 M6x12 5 mm material 11 x x 35 7 x A B A: Cantilever Arm for 100 mm tray B: Channel Bracket for 100 mm tray HDG SS AL Weight Type Art. no. Art. no. Art. no. SS (kg) S-SPB CA kg S-SPB CB kg 2(4) M6x12 B B Tray Wall SHS SPB Wall Support Bracket Type states tray width B and type SHS it will fit using a square U-bolt. See page 79 ordering U-bolts. SHS: Square Hollow Section. Can also be mounted directly to a wall. HDG SS Weight Type Fits SHS Art. no. Art. no. SS (kg) S-SPB SB-85-SHS S-SPB SB-111-SHS-80* S-SPB SB-135-SHS S-SPB SB-155-SHS S-SPB SB-175-SHS *) Fits tray width M6x x x Tray Bracket for SPBE/SPB-RF-100 HDG SS AL Weight Type Art. no. Art. no. Art. no. SS S-SPB SB-STUD L Ø Earth Link Jumpers Art. L Ø Type no. Length mm Screw mm 2 A-M EL-100/ A-M EL-100/ A-M EL-100/ A-M EL-300/ A-M EL-100/ A-M EL-300/ Other dimensions on request. Welding zone to be repainted Ø 13 T = 5mm M12 Earthing Boss CS SS SS Type Art.no. Art.no. Weight A-M EB-EL-50x50x kg Earthing Lug SS SS Type Art.no. Weight A-M WB-EL kg Holes 11 x mm 119 mm Holes 11 x 35 Holes 11 x Cross section 60 Holes 11 x (4-8) M10x20 Fits CH100-1 SPLICE ANGLE VERTICAL Holes 11 x 35 OE100 SA-VE Splice Connectors for channels For Mekano channel S-M CH100-1 HDG SS Weight Type Art. no. Art. no. SS (kg) OE100 SA-VE (6-8) M10x20 Fits CH100-1 SPLICE ANGLE HORIZONTAL 11 x Splice Connectors for channels For Mekano channel S-M CH100-1 HDG SS Weight Type Art. no. Art. no. SS (kg) OE100 SA-HO

68 FOR COLD WORK Y Load 350 kg M 10 25/35 For various tasks and for combination with channels 19 M6/M10 4 Beam Clamp Tapered M10 screw included SS Max Weigth Type Art. no. load (kg) SS (kg) S-M BC-U-25/ S-M BC-U-25/ S-M BC-U-35/ Pressure Plate (sleeve) on request. Type: S-M BC-U-PP Art. no D min/max D max D min 48 Press Clamp for Beam Clamp Supplied in pairs. Materialtykkelse HDG SS Type Material thickness Art. no. Art. no. S-M BC-FC 4 mm A Beam Clamp Maks. belastning / Max. load weight = 800 kg. A For D HDG SS Type mm min/max Art. no. Art. no. mm S-M BC S-M BC Y Load 600 kg Y Load 350 kg Beam Clamp for Stringer HDG SS Max Type Art. no. Art. no. Load (kg) S-M BC-ST-HD Pressure Plate (sleeve) on request. Type: S-M BC-U-PP Art. no Y Load 1000 kg 68 D min/max Beam Clamp for Beam Traverse HDG SS Type Art. no. Art. no. S-M BC-CH Beam Traverse For D HDG SS Max Type min/max Art. no. Art. no. Load (kg) mm S-M BT-CH Channel Angle For directional adjustment (t = 3mm) HDG SS Max Type Art. no. Art. no. Load (kg) S-M MG-CA

69 MultiGrid offers you the freedom in choice of discipline support Please study the catalogue range page 2. Contact us or simply download on: 69

70 MultiGrid : HVAC Prepared for circular channels. Prepared for square channels. Note the different use of the plastic pad. Universal Strap-Bracket A pair of brackets and levasint coated cable ties are all you need to fix both square and circular HVAC pipes of all sizes to the support system. Plastic pads insulate against both noise and corrosion. SS Weight Type Art. no. SS A-H HC-UN kg Plastic pad: Art. no.: Levasint coated cable ties: Use for example 19mm Band-it AE-416/ AE-436 and the lock AE 456 HVAC Clamps When ordering, add H = Outside duct diameter + insulation if relevant. HVAC clamp is supplied for duct dimensions from mm / perforated mm. SS Weight Type (H) Art. no. SS (kg) A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI A-H HC-LI HDG SS Weight Type (H) Art. no. Art. no. SS (kg) A-H HC A-H HC A-H HC A-H HC A-H HC A-H HC A-H HC A-H HC A-H HC A-H HC

71 Based on our standard MultiGrid details we offer custom made HVAC solutions Choose channels according to the required load capacity. Optimised use of Mekano channels give minimum weight and cost. I.V.A.R. waste water plant in Mekjarvik, Randaberg 71

72 MultiGrid Pipe Support Standard Details Clamped Shoe (2) Adjustable Type: OPS-SD PS02 Range Pipe 2 8 HDG 355 & SS 316L Please ask for our MultiGrid Pipe Support Standard Parts Catalogue Bolted Line Guide/ Hold down (LG & HD) Type: OPS-SD LG05 Range: Pipe Shoes 2 8 HDG 355 & SS 316L Bolted Line Guide/ Hold down Type: OPS-SD PG01 Range: Pipe Shoes 2 8 HDG 355 & SS 316L Clamped Shoe (2) Type: OPS-SD PS05 Range Pipe 2 8 HDG 355 & SS 316L U-BOLTS ordering list: Type/ For Ø Art. no. dim: mm: HDG SS 1 /2 M /2 M /4 M /4 M M /4 M /2 M Type/ For Ø Art. no. dim: mm: HDG SS 2 M M /2 M /2 M M /2 M M OPS SD-PC13 Pipe Clamp With Adjustable Bolted Bracket Pipe Clamp Perforated and Adjustable Type: OPS-SD PC13 Range Pipe 1/2 2 HDG 355 & SS 316L 72 Slide or/and rotate 180 to fit 25mm perforated angle. Sleeves to be removed for Grip function (pre-set Non-Grip) Adjustable to fit 25mm vertical - Perforated angle. Pre-set hight = 100mm (range = +25/ -15mm) NOTE: Req. bolt torque for M10 Self-Lock nuts = 30Nm Pipe Clamps perforated and adjustable Dim. ID Clamps HDG SS Weight Type inch mm Art.no. Art.no. SS (kg) OPS SD-PC /2 141 PS43755 PS OPS SD-PC /4 170 PS43756 PS OPS SD-PC PS43757 PS OPS SD-PC /4 222 PS43758 PS OPS SD-PC /2 222 PS43759 PS OPS SD-PC PS43761 PS

73 U-Strap Non-Grip Type: OPS-SD PC01 Range Pipe 2 8 HDG 355 & SS 316L U-Strap Grip Type: OPS-SD PC02 Range Pipe 2 8 HDG 355 & SS 316L U-Bolt Grip (Vibro-damping) Type: OPS-SD PC05 Range Pipe 1/2 8 HDG 355 & SS 316L U-Bolt Non-Grip (Vibro-damping) Type: OPS-SD PC06 Range Pipe 1/2 8 HDG 355 & SS 316L MultiGrid Adapter U-Bolt & U-Strap Type: OPS-SD AD01-A Range: U-Bolt 1/2 2 Range : U-Strap 6 & 8 HDG 355 & SS 316L MultiGrid U-Strap Adapter Type: OPS-SD AD01-B Range : U-Strap 2 & 5 HDG 355 & SS 316L U-Bolt Grip Type: OPS-SD PC04 Range Pipe 1/2 8 HDG 355 & SS 316L U-Bolt Non-Grip Type: OPS-SD PC03 Range Pipe 1/2 8 HDG 355 & SS 316L U-Bolt and U-Strap Adapters HDG SS Weight Type Art. no. Art. no. SS (kg) OPS SD-AD01-A PS60053 PS ,3 OPS SD-AD01-B PS60052 PS ,8 B Type: OPS-SD PC23 with 50mm longer base plate Type: OPS-SD PC21 with 50mm longer base plate Pipe Clamp With Perforatet Base Plate Type: OPS-SD PC23 Range Pipe 3 4 HDG 355 & SS 316L Pipe Clamp with Perforatet Base Plate Type: OPS SD-PC21 Range Pipe 1/2 2. HDG 355 & SS 316L Pipe Clamps for stdr. ST-pipes. For Cu/Ni on request. Dim. B HDG SS Weight Type inch mm Art. no. Art. no. SS (kg) OPS SD-PC /2 30 PS44105 PS ,5 OPS SD-PC /4 30 PS44106 PS ,5 OPS SD-PC PS44107 PS ,6 OPS SD-PC /4 30 PS44108 PS ,6 OPS SD-PC /2 30 PS44109 PS ,7 OPS SD-PC PS44111 PS ,8 OPS SD-PC PS43905 PS43900 OPS SD-PC /2 30 PS43906 PS43901 OPS SD-PC PS43907 PS ,2 OPS SD-PC /2 30 PS43908 PS ,5 OPS SD-PC PS43909 PS ,8 73

74 Oglaend System have commissioned Aveva to produce our Cable Tray, Ladder and Supports catalogue within their PDMS format. This has been done to ensure that our equipment codes are produced in a way that is fully compatible with PDMS and that Aveva will fully support the software with their existing client base. Our Supports, Cable Trays and Ladders can be downloaded from our web page. SmartPlant 3D and PDS SmartPlant 3D is an advanced plant design software and Intergraph Process, Power & Marine s next-generation, datacentric, rule-driven solution for streamlining engineering design processes while preserving existing data and making it more usable/re-usable. A fundamental component of Intergraph s SmartPlant Enterprise, SmartPlant 3D is a complementary, full-suite solution that provides all the capabilities needed to design a plant, and then keep it as-built throughout its life cycle. Intergraph PDS is a comprehensive, intelligent computer-aided design/engineering (CAD/CAE) application. Production-driven, PDS delivers the best design possible - and does it more efficiently to reduce the total installed cost of the project. It enhances value and minimizes risk while preserving the value of data. Intergraph PDS provides seamless integration with the design tools and catalogues of Oglaend System. Contact us for SP3D and PDS catalogue. 74

75 MultiGrid : Ships Flexible Support Plan and a Simplified support plan Use our low weight versatile Mekano Channels instead of the heavy welded traditional solutions. For full range Please ask for our catalogue; Cable Ladders and Accessories for Ships or download from Flexible support plan Only the welding channels are fixed in the construction yard by the fabricator. Then the installation contractor can fit the equipment without need of repainting. The channels provide multiple fixing points for cable ladders and small pipes, and also function as stiffeners for the stringers. The flexibility makes it easy to install and adjust E, I&T and piping, making this a very cost efficient solution. Simplified support plan Only the welding brackets are installed by the fabricator. Then the installation contractor can fit the equipment without need of repainting. The brackets combined with channels give fixing points for cable ladders and small pipes throughout the equipment route. 75

76 Multidiscipline support system for concrete constructions FOR COLD WORK Cast the Concrete Insert Rail into the concrete construction for full Multidiscipline Support. Additional concrete clamps for all our Mekano Channels and Support Equipment complete the MultiGrid system. Concrete Insert Rail as MultiGrid Ceiling on Ormen Lange. Please ask for our special folder describing the use of our Insert Rail Order Code for Concrete Insert Rail: Foam included. Type states length in mm HDG SS Type: Art. no. Art. no. S-M CIC-V S-M CIC-V S-M CIC-V Nail plate: S-M CIC-V-FC 79717C Nail box 500 pcs.:s-m CIC-V-NA 79717H T-bolt M10x30: S-M CIC-V-TS

77 Fixing brackets for concrete Choose starters according to the required load capacity. Ceiling Bracket for single or double CH100-1 For order details and load capacities see page Also study Angle Brackets on page 68. Ceiling Bracket (B) for Concrete or steel. Ceiling Bracket for Concrete Insert Rail. HDG SS Max. Weight Type L Art. no. Art. no. load (kg) SS (kg) S-M BS-CH S-M BS-125-CH50-2T (B) ,5 Safety factor 2. Page 81 Fix with: 1 bolt max Ø 12mm L = Type length + 40mm Cantilever Arm for LOE, RZE ladders and SPB trays. Type states width. Safety factor 2. HDG SS Maks last Weight Type L Art. no. Art. no. Max. load (kg) SS (kg) S-M CA ,4 S-M CA ,5 S-M CA ,6 S-M CA ,8 S-M CA ,9 S-M CA ,1 Fix with: 1 bolt max Ø 12mm 12.5 x 25 Page 81 Holes: 7 x 20 9 x 30 L L c/c Cantilever Arm for LOE, RZE ladders and SPB trays. Type states ladder width. Safety factor 2. HDG SS Max. Weight Type L Art. no. Art. no. load (kg) SS (kg) S-M CA S-M CA S-M CA S-M CA S-M CA L = Type length + 29mm For wider ladders and trays we recommend U-frames. Choose starters according to the required load capacity. 77

78 Multidiscipline support system in FRP Oglaend System s enhanced FRP system consists of a multidicipline heavy duty support system and a full range of cable trays and cable ladders. All made from Fiber Reinforced Plastic. FRP CABLE LADDERS, TRAYS AND SUPPORT SYSTEM Ask for our special catalogue! ISO CERTIFIED Being first is good, being smart is better, being both is Simply the Best! The FRP Support System is simple, smart and fast, whatever solution you require A light-weight Multidiscipline support system Corrosion resistant Simple hand tools used for cutting and drilling Modifications are easily done on site Our FRP support system with ladders and trays installed in a highly corrosive environment at the Elkem Solar Silicium production facilities in Norway. 78

79 Miscellaneous products: Type UNO Ask for special catalogue A complete range of UNO support channels and accessories along with best practice examples. RHS U-bolts for UNO: Ordering list in the UNO catalogue UNO channel fixed to RHS 80 with Square U- bolt type M8-RHS-80. The UNO channels support equipment plate and cable tray. Cantilever console fixed to RHS with UNO 3-hole brackets and Square U- bolts. Square U- bolts used to fix weather house bracket. Square U-bolt for RHS beams ordering list: SS Type states dim. Bolt/RHS Art. no. S-M UB-SQ-M8-SHS S-M UB-SQ-M8-SHS S-M UB-SQ-M8-SHS S-M UB-SQ-M10-SHS S-M UB-SQ-M10-SHS M10 supplies from stock. The white hook is approved by DNV Constructed to support loads from all kinds of cables. Made of synthetic, none conductive material. Available in three different sizes: Safety hook (Temporary solution) Type (white) Safe (kg) Approved by DNV Art. no. Length Working Load Weight A-M HT mm (6 ) 60 A-M HT mm (9 ) 55 A-M HT mm(12 ) 190 Type (LI=green) Light version is not approved by DNV. For some less load. A-M HT-LI mm (6 ) A-M HT-LI mm (9 ) A-M HT-LI mm(12 ) 79

80 Self-Lock System includes Vibration-proof fasteners SELF-LOCKING BOLT SETS with pan head and flange nuts Self-Lock system is supplied in stainless steel. Other bolts & fixing items see below and next page. Old-fashioned: The nut is moveable during vibrations bacause of sidewards thread gap. Self-Lock Nut details (A4-80) Descrition Height Key size Torque STD SS Type (mm) (mm) (Nm) Packs Art. no. DIN 6923 S-M NU-FL-M6 5, DIN 6923 S-M NU-FL-M8 7, DIN 6923 S-M NU-FL-M10 9, DIN 6923 S-M NU-FL-M12 11, Standard Nut details (A4-80) Descrition Height Key size Torque STD SS Type (mm) (mm) (Nm) Packs Art. no. DIN 934 S-M NU-M6 4, DIN 934 S-M NU-M8 6, DIN 934 S-M NU-M10 7, DIN 934 S-M NU-M New standard: The nut is locked during vibrations because all thread contact stops sidewards movement. Self-Lock, a unique pretension thread locking system. Ask for separate brochure. Bolt details for Mekano 60-2 system (Channel S-M CH60-2) SS Description Type Art. no. M10x25mm locking bolts A4 DIN 603 S-M LS-M10x M10x30mm locking bolts A4 DIN 603 S-M LS-M10x M10x35mm locking bolts A4 DIN 603 S-M LS-M10x M10x50mm locking bolts A4 DIN 603 S-M LS-M10x M10x70mm locking bolts A4 DIN 603 S-M LS-M10x M10x1000mm Threaded rod A4-80 DIN 975 S-M TR-M10x M10 Self-Lock Nuts A4-80 DIN 6923 S-M NU-FL-M Various use: Dimensions M10 is for splice connections e.g.: Type: S-M SC-L-CH100-4 Use: 8 x M10x130mm Other dimensions is for various items e.g.: Type: BC-MS-CH100-4 Use: 6 x M16x65mm For Bracing Connection Type: S-M SC-V-CH100-4-A and S-M SC-V-CH100-4-B Use: 4 x M10x130mm for splice and 1 x M20x130mm for hinge function Bolt details for Mekano system (Channel S-M CH100-4) SS Description Type Art. no. M10x130 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X M10x130 HEX Bolt A4 80 DIN 931 S-M HE-M10X M10x140 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X M10x140 HEX Bolt A4 80 DIN 931 S-M HE-M10X M10x150 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X M10x150 HEX Bolt A4 80 DIN 931 S-M HE-M10X M10x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M10X M10x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M10X M10 Self-Lock Nut A4-80 (L=10mm) DIN 6923 S-M NU-FL-M M12x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M12X M12x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M12X M12 Self-Lock Nut A4-80 (L=12mm) DIN 6923 S-M NU-FL-M M16x50 HEX Bolt-Set A4-80 S-M HE-NU-M16X M16x50 HEX Bolt A4 80 DIN 933 S-M HE-M16X M16x65 HEX Bolt-Set A4-80 S-M HE-NU-M16X M16x65 HEX Bolt A4 80 DIN 933 S-M HE-M16X M16x70 HEX Bolt-Set A4-80 S-M HE-NU-M16X M16x70 HEX Bolt A4 80 DIN 933 S-M HE-M16X M16x80 HEX Bolt-Set A4-80 S-M HE-NU-M16X M16x80 HEX Bolt A4 80 DIN 933 S-M HE-M16X M16x90 HEX Bolt-Set A4-80 S-M HE-NU-M16X M16x90 HEX Bolt A4 80 DIN 933 S-M HE-M16X M16 Full Metal Lock Nut A4-80 (L=13mm) DIN 980 S-M NU-FL-M M20x130 HEX Bolt-Set A4-80 S-M HE-NU-M20X M20x130 HEX Bolt A4 80 DIN 931 S-M HE-M20X M20 Full Metal Lock Nut A4-80 (L=16mm) DIN 980 S-M NU-FL-M

81 81

82 PR = Primed HDG = Hot Dip Galvan AISI 316 (L) ALU = Aluminium Perforated Channels For other support of trays, ladders and electrical installations. Available in 3m lengths mm mm mm mm 11 mm mm Flat Iron Crosswise perforated PR HDG SS ALU Weight Type Art. no. Art. no. Art. no. Art. no. HDG (kg) Fl-CW-7x20-30x5x ,6 Fl-CW-7x20-40x5x ,8 Fl-CW-7x20-50x4x ,0 Lengthwise perforated SS (kg) Fl-LW-7x35-25x5x ,4 Fl-LW-7x35-30x5x ,0 Fl-LW-7x35-40x5x ,2 Fl-LW-7x35-50x5x ,5 Fl-LW-11x35-40x5x ,9 Fl-LW-11x30-50x5x ,4 Fl-LW-11x30-40x6x ,0 Fl-LW-11x30-40x8x ,6 7 mm 11 mm 7 mm 11 mm Angle Iron Crosswise perforated PR HDG SS ALU Weight Type Art. no. Art. no. Art. no. Art. no. HDG (kg) AI-CW-7x16-30x30x3x ,9 AI-CW-7x16-40x40x4x ,9 Lengthwise perforated AI-LW-7x30-30x30x3x ,9 AI-LW-7x30-40x40x4x ,9 AI-LW-7x30-50x50x3x ,5* AI-LW-11x30-50x50x5x ,7 Double lengthwise perforated AI-LW-7x30-40x40x4x ,6 AI-LW-11x30-50x50x5x ,1 AI-LW-11x35-49x49x4x ,4 AI-LW-7x35-49x49x4x ,9 AI-LW-7x35/11x35-49x49x4x3000** ,7 AI-LW-13x40-54x54x4x ,8 Predefined lengths up to 1,5m are supplied on request. *) Weight in ALU 11 mm Welding Channel for tubing clamps For quick and easy tubing installation with ETIN tubing clamp. Available in 3m lengths. PG HDG SS ALU Weight Type Art. no. Art. no. Art. no. Art. no. SS (kg/m) RZ- WB , ,

83 LOCATIONS HOLDING COMPANY Øglænd Industrier AS P.O. Box 133 NO-4358 Kleppe Tel.: Fax: SUBSIDIARY Norway Øglænd System AS P.O. Box 133 NO-4358 Kleppe Tel.: Fax: Fax sales office: oglaend@oglsys.no Denmark Øglænd System AS Tel.: Fax: oglaend-system@oglsys.dk Dubai (Middle East) Oglaend Industries Middle East Tel.: Fax: Mobile: sales@oglaend.ae Malaysia Oglaend Industries SDN BHD Tel.: Fax: Mobile: sales@oglaendind.com fraser@oglaendind.com The Netherlands Oglaend System BV Tel.: Fax: rfq@oglaend-system.nl China Oglaend Industries (Suzhou) Co., Ltd Tel.: Fax.: Russia (St. Petersburg) Oglaend System Russia Tel.: +7(812) Fax: +7(812) info@oglsys.ru Singapore (South East Asia) Oglaend System Singapore Pte. Ltd. Tel.: Fax: oglaend@oglsys.com Sweden Ögländ System AB Tel.: Fax: oglaend-system@oglsys.se UK Oglaend System UK Ltd. Tel.: Fax: oglaend.system@oglsys.co.uk USA Oglaend System USA Tel.: sales@oglsys-us.com Korea Oglaend System Korea Co Ltd Tel.: Fax: oglaend@oglaend-system.co.kr SALES OFFICES Norway Øglænd System AS, Division Oslo: Tel.: Fax: Øglænd System AS, Division Ålesund: Tel.: Fax: Øglænd System AS, Division Trondheim: Tel.: Fax: AGENTS - DlSTRlBUTORS Abu Dhabi Proserv Albadie LLC Tel.: Fax: proserv@emirates.net.ae Australia J. T. Day Pty. Ltd. Tel.: Fax: enquiries@jtday.com.au Brazil M.O.TECH do Brazil Tel.: Fax: motech@motech.com.br Brunei Shinba Integrated Engineering Services Tel.: Fax: info@shinbaies.com Canada Source Energy Atlantic Tel.: + 1 (709) Fax: + 1 (709) sales@sourceenergyatlantic.com NOSO Ltd. Tel.: Fax: mshinkle@coil.ca Finland Elmarino - Shipping OY Tel.: Fax: Iceland Smith & Norland Tel.: Fax: sminor@sminor.is lndonesia PT. Multi Tarex MuIia Tel.: Fax: agus@multitarex.co.id Italy Piemme Broker S.R.L. Tel.: Fax m.maiandi@pmbroker.it Malaysia Offshore Industries Sdn Bhd Tel.: Fax: oisbkl@tm.net.my Mexico Esteban De Leon Albaitero Tel.: + 52 (55) esteban.deleon@oglsys.com.mx MBP International Trade Inc. Tel.: abello@mbptrading.com Thailand Probity International Co Ltd. Tel.: Ext. 107 Fax: ak@probity.co.th The Baltic States Bastini OÜ Tel.: Fax: sales@bastini.ee USA Source IEC Tel.: Fax: sales@sourceiec.com Vietnam MT Corp. Tel.: Fax: mail@mt-co.com Afrika - Agent Nigeria ZYCUS West Africa Ltd. Engineering & Procurement Solutions Tel u.ozoude@zwal.com.ng * X X * X HEAD OFFICE AND FACTORY SUBSIDIARIES AGENTS DISTRIBUTORS SALES OFFICES FABRICATION FACILITIES

84 SIMPLY THE BEST! This has been our motto since the company was founded in By living up to the motto we have become the market leader in our field worldwide. Oglaend System s goal is to develop systems that are better, simpler and more economic overall. Details may be subject to change without prior notice. Konsern/Holding company: Øglænd Industrier AS Datterselskap/Subsidiary: Øglænd System AS Hovedkontor fabrikk/head Office factory: P.O. box 133, N-4358 Kleppe, Tel.: , Fax: (47) Fax sales office: oglaend@oglsys.no 01.15