CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY

Size: px
Start display at page:

Download "CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY"

Transcription

1 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CTLOGUE Pipe Supports REGISTERED COMPNY MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY

2 Who we are Founded in 2005 by Directors Hayden Froggatt and John lmond, MSS Ltd is an innovative and forward thinking company, supplying and installing cable containment systems to the electrical and mechanical sectors. Experience, sound product knowledge and practised efficiency means MSS can provide you with the best and most cost effective solution for your needs. MSS is accredited under the ISO 9001 for quality management systems and ISO for safety management systems. What we do Cable Ladder/Cable Tray/Cable Basket/Metal Framing Systems/Solid Trunking and Skirting Duct Systems/Pipe Supports/Seismic Design and Supply/Installation/Bespoke Fabrication Why MSS We are specialists in: Cable & Pipe Support System Mechanical & Electrical Installations Design/Engineering/Supply/Installation Specialised Mechanical Installations Skirting & Power Duct Interior Fitouts Special Fabrication and Engineering We can design, engineer, manufacture and install to your specifications providing you with quality products, on time and within budget. General and Bespoke Fabrication Our main focus is on light to medium steel fabrication, with an emphasis on small production runs and one-off high end bespoke works. Our scope and skill set is broad due to a wide range of the latest technology available in-house including the latest in automated plant and equipment. We regularly update our capital equipment to ensure jobs are executed to the highest standard, on time and within budget. Our highly trained team of Designers, Fabricators and Welders pride themselves on delivering precision design and engineering in luminium, Steel and Stainless Steel. MECHNICLSUPPORT.CO.NZ Mechanical Support Systems. Mechanical 0508 Support CBLE Systems reserves TRY the right to SLESINFO@MECHNICLSUPPORT.CO.NZ change designs and specifications without notice.

3 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R INDEX Pipe Supports: Page 2 Piece Clamps 6 Light Duty Saddles 7 Light Duty 2 Piece Clamps 8 Light Duty 2 Piece Yoke Clamps 9 Single Piece Channel Clamps 10 U-Bolt Guide Supports 11 Medium Duty Saddles 12 Medium Duty 2 Piece Clamps 13 Medium Duty 2 Piece Yoke Clamps 14 Heavy Duty 3 Bolt Clamps 15 Heavy Duty Saddles 16 Heavy Duty 2 Piece Clamps 17 Clevis Hangers 18 Eye Nuts 18 Blade Ends 19 Timber Ferrules 20 Flexibarrier 20 Spherical Washers 21 Swivel Cages 21 Slide Guides 21 Pipe and Tube Data 22 REGISTERED COMPNY

4 PRODUCTION Machines and Scope Metal Fabrication CUTTING: Guillotine, band saw, gas cutting, punch and shear Plate cutting up to 6mm steel Batch cutting Hole punching Forming and bending: Press brake, pan folder, bulldozer bender 0.5mm thick to 6mm steel djustable jig for flat bar bending WELDING: Tig, Mig or rc Pulsed Mig and Tig welder COIL PRODUCTION: Power press, de-coiling unit Punch, press and cut Medium to large production runs FINISHING: Powder Coating, Galvanising, Zinc Plating, nodising, and Polishing CUTTING FORMING WELDING FINISHING MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY

5 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS PIPE SUPPORTS REGISTERED COMPNY 1

6 PIPE SUPPORTS 2 Piece Clips To Suit Outside Pipe Diameter Width x Thickness E2024 HDG 8 32 x E2025 HDG x E2026 HDG x E2027 HDG x E2028 HDG x E2029 HDG x E2030 HDG x E2031 HDG x E2032 HDG x E2033 HDG x E2034 HDG x E2035 HDG x E2036 HDG x E2037 HDG x E2038 HDG x E2039 HDG x E2040 HDG x E2041 HDG x E2042 HDG x E2043 HDG x E2044 HDG x E2045 HDG x E2046 HDG x E2047 HDG x E2048 HDG x E2049 HDG x E2050 HDG x E2051 HDG x E2052 HDG x E2053 HDG x E2054 HDG x E2055 HDG x E2056 HDG x E2057 HDG x E2058 HDG x E2059 HDG x E2060 HDG x E2062 HDG x E2064 HDG x E2066 HDG x E2068 HDG x E2070 HDG x MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

7 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Light Duty Saddles Standard Finish: Hot Dipped Galvanised Material: 25 x 3mm Working Load: 0.75 kn Safety Factor: 2.5 D Outside Pipe Dia. B EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC REGISTERED COMPNY 7

8 PIPE SUPPORTS Light Duty 2 Piece Clamps Standard Finish: Hot Dipped Galvanised Material: 25 x 3mm Working Load: 2.88 kn Safety Factor: 2.5 D Outside Pipe Dia. B C Bolt Size EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M EMC M MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

9 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Light Duty 2 Piece Yoke Clamps Standard Finish: Hot Dipped Galvanised Material: 25 x 3mm Working Load: 0.38 kn Safety Factor: 2.5 D Outside Pipe Dia. B C EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC REGISTERED COMPNY 9

10 PIPE SUPPORTS Single Piece Channel Clamps Standard Finish: Hot Dipped Galvanised Working Load: 1.76 kn Safety Factor: 2.5 D Outside Pipe Dia. Width x Thickness EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

11 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS U-Bolt Guide Supports Standard Finish: Hot Dipped Galvanised D Outside Pipe Dia. B C EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC EMC REGISTERED COMPNY 11

12 PIPE SUPPORTS Medium Duty Saddles Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 D Outside Pipe Dia. B Width x Thickness Working Load (kn): EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

13 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Medium Duty 2 Piece Clamps Standard Finish: Hot Dipped Galvanised Working Load: 7.20 kn Safety Factor: 2.5 D Outside Pipe Dia. B C Width x Thickness EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M12 40 x EMC M16 50 x EMC M16 50 x EMC M16 50 x EMC M16 50 x REGISTERED COMPNY 13

14 PIPE SUPPORTS Medium Duty 2 Piece Yoke Clamps Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 D Outside Pipe Dia. B C Width x Thickness Working Load (kn): EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

15 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Heavy Duty 3 Bolt Clamps Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 D Outside Pipe Dia. B C Width x Thickness Bolt Size Working Load (kn): EMC x 5 M10 x EMC x 5 M10 x EMC x 6 M12 x EMC x 6 M12 x EMC x 6 M12 x EMC x 6 M16 x EMC x 6 M16 x EMC x 6 M16 x EMC x 10 M20 x EMC x 10 M20 x EMC x 10 M20 x EMC x 10 M24 x EMC x 10 M24 x EMC x 10 M24 x EMC x 16 M30 x EMC x 16 M30 x EMC x 20 M36 x EMC x 20 M36 x EMC x 20 M36 x REGISTERED COMPNY 15

16 PIPE SUPPORTS Heavy Duty Saddles Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 D Outside Pipe Dia. B C Width x Thickness Working Load (kn): EMC x EMC x EMC x EMC x EMC x EMC x EMC x EMC x MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

17 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Heavy Duty 2 Piece Clamps Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 D Outside Pipe Dia. B C Width x Thickness Working Load (kn): EMC M20 75 x EMC M20 75 x EMC M20 75 x EMC M20 75 x EMC M24 75 x EMC M24 75 x EMC M30 75 x REGISTERED COMPNY 17

18 PIPE SUPPORTS Clevis Hangers Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 B C Ør Øb Width x Thickness Working Load (kn): EMCL x EMCL x EMCL x EMCL Eye Nuts Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 B C ØD N Width x Thickness Working Load (kn): EM35/M M10 40 x EM35/M M12 75 x EM35/M M16 90 x EM35/M M20 90 x EM35/M M x MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

19 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Blade Ends Standard Finish: Hot Dipped Galvanised Safety Factor: 2.5 B C ØD F Width x Thickness EM x EM x EM x EM x EM x Double Blade Ends can be made to order. Use the following to configure the required part number: EMC36 - XX - XX - XXXX Series Rod Diameter (mm) Length L (mm) Example: EMC REGISTERED COMPNY 19

20 PIPE SUPPORTS Timber Ferrules To Suit Outside Pipe Dia. Lagging Wall Thickness: 25mm 38mm 50mm Ferrule Size: I.D. x O.D x x x x x x x x x (15 N.B.) 21 x x x x x x (20 N.B.) 27 x x x x x x (25 N.B.) 34 x x x x x x (32 N.B.) 43 x x x (40 N.B.) 48 x x x x x x (50 N.B.) 60 x x x x x x (65 N.B.) 76 x x x (80 N.B.) 89 x x x x x x (100 N.B.) 114 x x x x x x (125 N.B.) 140 x x x x x x (150 N.B.) 165 x x x x x x x x x x x x x x x 368 ll sizes manufactured on request. Part Number Configuration: EMC60 - XX - XXX - XXX Example: Length (mm) [40 or 75] Ferrule I.D. (mm) Ferrule O.D. (mm) EMC Flexibarrier Roll Length (m): EM2600B PL 20 bsorbs shock Protects from abrasion and corrosion Isolates sound and vibration llows for expansion and contraction Stable from -45 to +175 Celcius Flexible black elastomer material Can also be purchased by the metre 20 MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

21 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Spherical Washers ØD EM37/M EM37/M EM37/M EM37/M Swivel Cages Typical pplication: B C D ØE ØF Width x Thickness EM38/M x EM38/M x EM38/M x EM38/M x Slide Guides vailable on request. REGISTERED COMPNY 21

22 PIPE SUPPORTS Pipe & Tube Data Copper Tube Nominal Tube Size Dia. x Wall Thickness ctual Outside Dia. (US) ctual Outside Dia. (NZ) of tube filled with water 15x x x x x x x x x x x x x x x x x Pressure Pipe - NSI Sch 80 PI XS (up to 200NS) Nominal Pipe Diameter ctual Outside Dia. Wall Thickness of tube filled with water MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

23 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PIPE SUPPORTS Pipe & Tube Data Pressure Pipe - PI Std Wt NSI Sch 40 (up to 250 NZ) Nominal Pipe Diameter ctual Outside Dia. Wall Thickness of tube filled with water Galvanised Pipe Nominal Pipe Diameter ctual Outside Dia. Wall Thickness of tube filled with water 8 N.B Med N.B Med N.B Med N.B Med N.B Med N.B Med N.B Med N.B Med N.B Med N.B.Med N.B Med N.B Med N.B Med REGISTERED COMPNY 23

24 PIPE SUPPORTS Pipe & Tube Data PVC Pressure Pipe - Class 15 Nominal Pipe Diameter ctual Outside Dia. Wall Thickness of tube filled with water PVC Pressure Pipe - Class 6 Nominal Pipe Diameter ctual Outside Dia. Wall Thickness of tube filled with water Cast Iron Pipe - Class K9 Nominal Pipe Diameter ctual Outside Dia. Wall Thickness of tube filled with water Concrete Lining Thickness of Lined Pipe of lined pipe filled with water MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

25 BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R MECHNICL PIPE SUPPORTS SUPPORT SYSTEMS CBLE TRY REGISTERED COMPNY 25

26 MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY SLESINFO@MECHNICLSUPPORT.CO.NZ

27 Product Catalogue Range Download a catalogue Get in touch with us 0508 CBLE TRY or (09) R BS OHSS 18001:2007 & S/NZS 4801:2001 REGISTERED COMPNY Certificate No. NZP1023HS 27

28 PIPE SUPPORTS MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY ( )

PRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY

PRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CATALOGUE REGISTERED COMPANY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY Who we are Founded in 2005 by Directors Hayden Froggatt and

More information

CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY

CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY ALUMINIUM CABLE LADDER CABLE TRUNKING PRODUCT CATALOGUE Electrical Cable Containment REGISTERED COMPANY Mechanical Support

More information

Pipe Supports PS 1. PO Box Highbrook Auckland

Pipe Supports PS 1. PO Box Highbrook Auckland 1 salesinfo@mechanicalsupport.co.nz PO ox 204336 Highbrook uckland www.mechanicalsupport.co.nz 2 2 Piece lips To Suit Outside Pipe iameter Width x Thickness E2024 HG 8 32 x 1.6 0.04 E2025 HG 11 32 x 1.6

More information

CATALOGUE PIPE SUPPORTS

CATALOGUE PIPE SUPPORTS CTOGUE B R T IN SIN C E 1 9 2 4 G 90 YERS ST E RU CE T PIPE SUPPORTS O F PIPE SUPPORTS - PICTORI INEX PIPE SUPPORTS The Unistrut pipe support systems covers an extensive range of hangers, pipe clips, pipe

More information

Pipe Support Systems & Components. EDITION 3.

Pipe Support Systems & Components. EDITION 3. Pipe Support Systems & Components 10 899 4 sales@anchoragegroup.com.au www.anchoragegroup.com.au ABOUT ANCHORAGE GROUP ABOUT ANCHORAGE Leading manufacturing company Swift Metal Services designs, manufactures

More information

Electrical and Mechanical Supports Systems

Electrical and Mechanical Supports Systems Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional

More information

INDUSTRIAL PIPE SUPPORTS CATALOGUE

INDUSTRIAL PIPE SUPPORTS CATALOGUE INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT

More information

Pipe/Conduit Clamps & Hangers

Pipe/Conduit Clamps & Hangers Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories

More information

Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:

Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website: Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page

More information

Product Specifications PIPE SUPPORT PRODUCTS

Product Specifications PIPE SUPPORT PRODUCTS Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43

More information

JIS G (SGP)

JIS G (SGP) JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3

More information

Beam Clamps. Materials & Finishes (Unless otherwise

Beam Clamps. Materials & Finishes (Unless otherwise Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports

More information

ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.

ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb. Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and

More information

Pipe hanger solutions

Pipe hanger solutions Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction

More information

229 B-Line series Pipe Hangers & Supports

229 B-Line series Pipe Hangers & Supports accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged

More information

Standard Hydraulic Cylinder range

Standard Hydraulic Cylinder range 18 e-mail: sales@interfluid.co.uk Standard Hydraulic Cylinder range WELCOME / CONTENTS Welcome to the standard range of hydraulic cylinders. CATALOGUE / CONTENTS Welcome and catalogue contents page 1-2

More information

SECTION PIPE HANGERS AND SUPPORTS

SECTION PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7

CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7 CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound

More information

PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL

PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8 (41 MM) WIDTH SERIES CHANNEL PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless

More information

Hex Head Self-Drilling Screws. Page 2

Hex Head Self-Drilling Screws. Page 2 PRODUCT CATALOGUE Head Office: QLD Branch: Unit 10 Unit 3 800-812 Old Illawarra Rd Veronica St Menai NSW 2234 Capalaba QLD 4157 Ph 02 9543 8600 Ph: 07 3390 2600 INDEX Specifications maybe reviewed and

More information

Variable dimensions depending on the configuration type. See overleaf for detailed dimensions. All configurations are availble in wide option.

Variable dimensions depending on the configuration type. See overleaf for detailed dimensions. All configurations are availble in wide option. Secure storage for trolleys at shopping complexes and airports. Easily repaired, adapted or added to. Key features Proprietary designs are pre-engineered for structural integrity Modular, no-weld components

More information

DUST, FUME, TRIM & WASTE REMOVAL

DUST, FUME, TRIM & WASTE REMOVAL METFLO DUCT COMPONENTS DUST, FUME, TRIM & WASTE REMOVAL H-P Products, Inc. 800.860.TUBE (8823) Fax: 330.875.7155 www.metflo.com 1 Services INDEX SERVICES.... 2 SPECIAL PARTS.... 3 ROLLED LIP DUCT Straight

More information

Ancillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel.

Ancillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel. 78 FIG. 222 FIG. 283 FIG. 1 04/ U BOLT (GRIPPED) Nom A C D T L Load 15 21.3 7 28 6 25 37 220 20 26.9 33 6 25 40 220 25 33.7 40 6 25 43 220 32 42.4 53 35 49 545 40 48.3 16 60 35 56 545 50 60.3 16 71 35

More information

Specialised Truck Bodies & Engineering

Specialised Truck Bodies & Engineering Specialised Truck Bodies & Engineering 27 Doyle Ave PO Box 220 Unanderra NSW 2526 Tel: 02 42728400 Fax: 02 42728411 Email: sales@berryhowe.com.au Web: www.berryhowe.com.au About Us Berry Howe Industries

More information

BS 3974 Pipe Supports. Section 4

BS 3974 Pipe Supports. Section 4 BS 3974 Pipe Supports Section 4 Section 4 of this catalogue has been compiled with the kind permission of the British Standard Institution. All data has been taken from BS 3974 Part 1 (1974), Part 2 (1978)

More information

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development. Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive

More information

HANGERS, STRUT, AND FITTINGS SUBMITTAL

HANGERS, STRUT, AND FITTINGS SUBMITTAL HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam

More information

COMPANY PROFILE: Eastman Impex is a global company, established in year 1996 and it has been accredited with ISO 9001: 2008.

COMPANY PROFILE: Eastman Impex is a global company, established in year 1996 and it has been accredited with ISO 9001: 2008. COMPNY PROFILE: Eastman Impex is a global company, established in year 996 and it has been accredited with ISO 900: 008. Since 996 group is growing with increasing trend every year and now it comprises

More information

UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL

UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL TEL: 0121 778 6001 FAX: 0121 778 6002 EMAIL: sales@astonfittings.com WEBSITE: www.astonfittings.com QUALITY POLICY The directors of Aston

More information

50 years experience in offering tailor made solutions to suit every customer s need.

50 years experience in offering tailor made solutions to suit every customer s need. Digital Brochure 50 years experience in offering tailor made solutions to suit every customer s need. Mages Group was established in 1960 by Mr William Mages and has since grown to become one of the South

More information

ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS DESIGN GUIDE PURLINS AND GIRTS S&T029N

ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS DESIGN GUIDE PURLINS AND GIRTS S&T029N DESIGN GUIDE PURLINS AND GIRTS ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS S&T029N JUL 2015 CONTENTS INTRODUCTION 2 Acknowledgements 2 Disclaimer 2 Product Technical Statement 3 Producer Statement

More information

HDPE PIPE SYSTEMS PRODUCT CATALOGUE.

HDPE PIPE SYSTEMS PRODUCT CATALOGUE. HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington

More information

PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS

PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS Sl. 1 260200003A STEEL TUBULAR POLE SWAGED 11 MTR. LONG WITH BASE 7651.62 8034.20 8435.91 PLATE & CAP (IS2713/1980) BTM: 165.1X4.5MM-5.6MTR,

More information

JM Aerofoil Multi-Stage 50 Hz

JM Aerofoil Multi-Stage 50 Hz JM Aerofoil Multi-Stage 5 Hz JM AEROFOIL - MULTI-STAGE CONTENTS Page: JM Aerofoil Multi-Stage - Introduction -5 Multi-Staging Motor Frame Size Schedules - Three Phase 7-8 Performance Curves SK1- SK135

More information

B U I L D I N G C O N N E C T I O N S T H AT L A S T

B U I L D I N G C O N N E C T I O N S T H AT L A S T B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior

More information

The Amodil Group. Specialists In Stainless Steel Long Products

The Amodil Group. Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless

More information

Series 2, 3, 4, & 5 Aluminum - Accessories

Series 2, 3, 4, & 5 Aluminum - Accessories The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,

More information

Cable Tray and Accessories

Cable Tray and Accessories Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series

More information

PIPE & CONDUIT SYSTEMS. Free Call:

PIPE & CONDUIT SYSTEMS. Free Call: PIPE & CONDUIT SYSTEMS Free Call: 1800 899 480 www.anchoragegroup.com.au Anchorage pipe supports are designed and manufactured in Australia by leading manufacturing company, Swift Metal Services. Offering

More information

Series 2, 3, 4, & 5 Aluminum - Accessories

Series 2, 3, 4, & 5 Aluminum - Accessories Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13

More information

SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index

SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index www.sheldonsengineering.com SQUARE BODY RADIAL BLADE CENTRIFUGAL FAN D6900 GENERAL SPECIFICATION. The centrifugal fan shall be designed and

More information

Brackets. B (304.8) BRACKET Uniform Loading 900 Lbs. (4.00 kn) Safety Factor of 2.5 Standard finishes: ZN, GRN Wt./C 260 Lbs. (117.

Brackets. B (304.8) BRACKET Uniform Loading 900 Lbs. (4.00 kn) Safety Factor of 2.5 Standard finishes: ZN, GRN Wt./C 260 Lbs. (117. B187 BRCKET Uniform Loading 1450 Lbs. (6.45 kn) Hole Spacing on Bracket Top 5 5 /1 (150.8) Center to Center t./c 193 Lbs. (87.5 kg) 2 1 / B188 BRCKET Uniform Loading 1080 Lbs. (4.80 kn) Hole Spacing on

More information

Reference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data

Reference Data. Schedule 40 Steel Pipe Data. Schedule 80 Steel Pipe Data Schedule 40 Steel Pipe Data Maximum Recommended Pipe Size Pipe O.D. Thickness Weight of Pipe Filled With Water Span* Hanger Rod Ft. Meter Sizes 3/8" (10).675 (17.1).091 (2.3).6 (.9).7 (1.0) 7 (2.13) 3/8"-16

More information

WORKING GEAR CATALOGUE 2015

WORKING GEAR CATALOGUE 2015 CABLE WORKING GEAR CATALOGUE 2015 Rev B 2015 1 MC Engineering Services are specialists in the design, manufacture, repair, thorough examination and testing of lifting, lashing and mooring equipment; as

More information

STRAIGHT PERFORATED TRAY

STRAIGHT PERFORATED TRAY STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD

More information

Tecstrut Channel Suspension & Framing System

Tecstrut Channel Suspension & Framing System lindab I the ventilation products specialist Tecstrut Channel Suspension & Framing System Complies with HVCA specification DW144. Manufactured from corrosion resistant materials. Channels produced in accordance

More information

Pipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips

Pipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips Select Language Home Profile Products Contact Us Email Resources Brass Sanitary Fittings Brass Cable Glands Cable Gland Accessories Brass Fasteners Pipe Brackets - Pipe Support Systems Brass Pipe brackets

More information

Butterfly Valves. SECTION 8a. Tel: +44 (0) Fax: +44 (0)

Butterfly Valves. SECTION 8a. Tel: +44 (0) Fax: +44 (0) SECTION a Butterfly Valves Tel: + ()195 7 ax: + ()195 7 Email: sales@hattersley.com export@hattersley.com www.hattersley.com Contents and Numerical Index Butterfly Valves Contents Page igure Number Index

More information

Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line.

Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line. HYDRAUIC CYINDERS Hydraulic Cylinders Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line. EIC-J-1-0 Graphic Symbol

More information

A driving force in the market place

A driving force in the market place A driving force in the market place Since 1973 Mettex has been producing quality, well engineered and affordable flexible braided wire products for use throughout the electrical industries. We are now

More information

Rotaplay Solar Spinner

Rotaplay Solar Spinner PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT Rotaplay Solar Spinner (Polydek Foot Plate) HEAVIEST PART TOTAL WEIGHT 6020-083 (883) Ø20 x 050mm High 6-2 Years 000mm Approx 03 Kg Approx 32 Kg SPECIFICATION Solid

More information

Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel

Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel DARAC LTD are a leading industrial supplier of architectural & rigging items under the brand name STEELGEAR. We stock a vast range

More information

Power Distribution Enclosures. Pillar shells and in-ground feeder pillars

Power Distribution Enclosures. Pillar shells and in-ground feeder pillars Power Distribution Enclosures Pillar shells and in-ground feeder pillars Lucy Zodion Power distribution enclosures for every market Lucy Zodion is the UK s leading provider of feeder pillars with a wide

More information

VARIABLE SPRING SUPPORTS BV35, BV70, BV140, BV210

VARIABLE SPRING SUPPORTS BV35, BV70, BV140, BV210 SUPPORTS 35, 70, 140, 210 GENERAL Variable spring supports are used for supporting pipework, vessels, columns and pipe connections to large tanks, that are subject to thermal movement and/or subsidence.

More information

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P.

AZ Cylinder. Specifications. Features: Features Type ISO 6431 VDMA CETOP RP43P. Ø32mm - 100mm ISO 6431 VDMA CETOP RP43P. Specifications Features Type ISO 6431 VDM 24562 CTOP P43P Series Z Configurations Z Double cting, Single od, Magnetic Piston, Cushions ZD Double cting, Double od, Magnetic Piston Construction Materials

More information

Product Information. December 1, The Cable Connection 52 Heppner Drive Carson City, NV 89706

Product Information. December 1, The Cable Connection 52 Heppner Drive Carson City, NV 89706 Product Information December 1, 2016 The Cable Connection 52 Heppner Drive Carson City, NV 89706 800.851.2961 775.885.1443 Fax: 775.885.2734 E-mail: info@ultra-tec.com www.ultra-tec.com Summary of Cable

More information

Lindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s

Lindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s Lindapter Fixing Product Guide Steelwork Fixings ype A Nose Recess ype A Malleable iron, bright zinc plated / hot dip galvanised Clamping Area K Skirt ail Steelwork clamp with recessed top to hold the

More information

Class 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable

Class 1 as per EN o C to 65o C 15 kg/cm2 ( without thermowell ) 120 % of Full Scale 8 mm ½ BSP (M) Adjustable Special Features & tex approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil filled (optional) Standard followed EN 90. pplication

More information

GT All SS Industrial Dial Thermometer Gas Filled system

GT All SS Industrial Dial Thermometer Gas Filled system TM ll SS Industrial Dial Thermometer Gas Filled system Special Features approved electrical contacts. Inert gas filled expansion system. Stainless steel case & stem With or without thermowell Silicon oil

More information

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications.

The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. The Keystone Series GR is a heavy duty industrial resilient seated butterfly valve aimed at general purpose applications. Features Wafer and lugged body design with face-to-face dimension, according to

More information

THE WORLD S FASTEST DUCTING

THE WORLD S FASTEST DUCTING NORDFAB DUCTING CATALOGUE Quick-Fit C l i p p e d D u c t i n g THE WORLD S FASTEST DUCTING & FLANGED DUCTWORK Nordfab QF Clipped and FL Flanged ducting QF clipped and FL flanged ducting offers a complete

More information

Blast Valves for HVAC Ducting

Blast Valves for HVAC Ducting Blast Valves for HVAC Ducting Introduction European EMC Products Ltd was established in July 1996 to supply high quality products and services to the Electro- Magnetic Compatibility (EMC) market. Quality

More information

Index. The Benefits of Experience 2. Design and Manufacture 3. Quality 3. Slides and Hooks 4-7. Gambrels & S Hooks 8. Beef Rollers 9.

Index. The Benefits of Experience 2. Design and Manufacture 3. Quality 3. Slides and Hooks 4-7. Gambrels & S Hooks 8. Beef Rollers 9. Index The Benefits of Experience 2 Design and Manufacture 3 Quality 3 Slides and s 4-7 Gambrels & S s 8 Beef Rollers 9 Bleeders 10 Other Components 11-12 Notes on 13 Page 1 The Benefits of Experience.

More information

Pre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001

Pre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001 Technical Guide WM5.1 Viking Johnson Couplers and Flange Adaptors Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology. Scan for more

More information

TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices

TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,

More information

PIPE SUPPORT SYSTEMS CATALOGUE

PIPE SUPPORT SYSTEMS CATALOGUE PIPE SUPPORT SYSTEMS CTLOGUE www.caddyindustrial.com.au 2 Phone: 08 6278 7500 Contents 1 Pipe Supports Insulated Pipe Clamps ZP & SS... Page 1-2 Stabil Pipe Clamps...Page 3 Channel Clips & Hydrosorbs...Page

More information

PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD

PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD www.briggsmarine.com.au Briggs Marine Products are manufactured in Australia from specified copper base

More information

2/2-way Globe Valve for media up to +180 C, DN

2/2-way Globe Valve for media up to +180 C, DN 2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above

More information

Series 2, 3, 4, & 5 Steel - Accessories

Series 2, 3, 4, & 5 Steel - Accessories - ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow

More information

Gears And Gear Drives (India) Pvt Ltd

Gears And Gear Drives (India) Pvt Ltd Gears And Gear Drives (India) Pvt Ltd Design and manufacturers of Lifting Systems An ISO 9001-2015 Certified Company. Seshagiri Managing Director Gears and Gear Drives (India) Pvt Ltd Motion Technology,

More information

CABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.

CABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS. CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts

More information

General Welding & Fabricating, Inc. Industrial Div. Catalog

General Welding & Fabricating, Inc. Industrial Div. Catalog General Welding & Fabricating, Inc. Industrial Div. Catalog Machine Design Weldments Machine Repair Millwright/Rigging Custom Trailers Ultimate Fab. Jobs Established in 1989, General Welding & Fabrication,

More information

Design Stress = 8 Mpa

Design Stress = 8 Mpa hdpe Pipes HdPE Pipes Muna Noor Manufacturing & Trading LLC is a pioneer in the manufacture of plastic pipe systems in Oman. Today s modern polyethylene resins are highly engineered for rigorous applications

More information

Steel Framing Systems

Steel Framing Systems Steel Framing Systems Total Cable Management Solutions BS-EN-ISO 9001:2000 QULITY MNGEMENT SYSTEM Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, ksai, Pramzone, BKKS office complex

More information

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Finish and special materials

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Finish and special materials Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Design Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and

More information

Proco Series 300 Flagged Rubber Pipe Connectors

Proco Series 300 Flagged Rubber Pipe Connectors Proco Series 0 Flagged Rubber Pipe Connectors PROCO Series 0 Rubber Pipe is designed for tough demanding industrial and commercial applications as found in: Chemical-Petrochemical and Industrial Process

More information

Ford Brass Saddles Style 101B and 202B

Ford Brass Saddles Style 101B and 202B 101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,

More information

Series 1 Steel - Straight Sections

Series 1 Steel - Straight Sections Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!

More information

LOAD RATED FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS

LOAD RATED FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS LOAD RATED GRADE 316 STAINLESS STEEL FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS 37 Taree Street Burleigh QLD 4220 Telephone: (07) 55 935 688 Fax: (07 55 935 872 Email: bridge@bridco.com.au

More information

A GUIDE TO PIPE SIZES

A GUIDE TO PIPE SIZES A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart

More information

TAPPING & SERVICE SADDLES

TAPPING & SERVICE SADDLES TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)

More information

Matt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: January 12, 2017

Matt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: January 12, 2017 To: Matt Morgan Assistant Superintendent of Support Services From: Kristine Johnston Director of Purchasing Date: January 12, 2017 Re: Career and Technology Equipment Repair Service Annual Contract #16-11-5037R

More information

STANDARD PIPE CLAMP FIG. 520 & 521

STANDARD PIPE CLAMP FIG. 520 & 521 Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod

More information

TRUCK MIXER DRIVES 500 SERIES

TRUCK MIXER DRIVES 500 SERIES TRUCK MIER DRIVES 00 SERIES TRSMITL BONFIGLIOLI presents its new line of drives for truck mixer use. The newly designed product replaces drives from current production, which totalled 60,000 units sold

More information

BOSS STEEL Metal Reference Book Version 9

BOSS STEEL Metal Reference Book Version 9 Intro BOSS STEEL Metal Reference Book Version 9 This ninth edition of the Boss Steel Metal Reference Book has been designed to inform and assist you in making the right decision when it comes to acquiring

More information

MIN ORDER CHARGE 30. 1st January 2017 PIANO WIRE. MATERIAL: POLISHED SPRING STEEL Specification: BS 5216 ND3

MIN ORDER CHARGE 30. 1st January 2017 PIANO WIRE. MATERIAL: POLISHED SPRING STEEL Specification: BS 5216 ND3 PIANO WIRE MATERIAL: POLISHED SPRING STEEL Specification: BS 5216 ND3 MM S.W.G. PART NO. 0-2.9 3-6.9 7-12.9 13-24.9 25+KG STOCKED IN 3.15 10 101-3150 16.77 15.10 13.42 10.06 9.23 COILS 2.80 11 101-2800

More information

SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index

SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index SHELDONS ENGINEERING Inc. Sheldons Engineering Product Index AIR HANDLING-RADIAL BLADE CENTRIFUGAL FAN XB GENERAL The centrifugal fan shall be designed and manufactured by Sheldons Engineering to ensure

More information

Uses, Certifications, and Standards STRUT FITTINGS,BF-FTGS,MISCELLANEOUS

Uses, Certifications, and Standards STRUT FITTINGS,BF-FTGS,MISCELLANEOUS 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 B82352 Profile End Cap Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category

More information

Steel Conduits Conduit Fittings Flexible Conduits

Steel Conduits Conduit Fittings Flexible Conduits Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;

More information

TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B

TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page 2 EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

More information

CONTENTS BUILD YOUR LEGEND YOUR WORK IS YOUR REPUTATION AND SO DO WE. BECAUSE WE ARE NEVER CONTENT WITH THE STATUS QUO.

CONTENTS BUILD YOUR LEGEND YOUR WORK IS YOUR REPUTATION AND SO DO WE. BECAUSE WE ARE NEVER CONTENT WITH THE STATUS QUO. YOUR WORK IS YOUR REPUTATION That s why each and every day, you put it all out there for the world to judge. Never stopping and always looking forward to your next challenge. You know what it means to

More information

The Largest Handrail Stanchions & Hollow Ball Manufacturer In China

The Largest Handrail Stanchions & Hollow Ball Manufacturer In China 1 T H I S I S DIAMOND Taizhou Diamond Metal component Co., Ltd Xu Village Jiangyan District Taizhou Jiangsu China Tel:+86 523 8664 4985.Fax:+86 523 8875 3279 diamond@dmdmetals.com www.dmdmetals.com/ DIAMOND

More information

B-LINE SERIES. Product brochure. Snap N Shield. pipe support solution

B-LINE SERIES. Product brochure. Snap N Shield. pipe support solution Product brochure B-LINE SERIES Snap N Shield pipe support solution Enhanced Snap N Shield pipe support solution for insulation protection Fast, easy installation snaps onto strut channel Contact area to

More information

Pipe Hangers, Strut & Accessories

Pipe Hangers, Strut & Accessories I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r

More information

LC/SC. Long & Short Cased Axial Fans

LC/SC. Long & Short Cased Axial Fans LC/SC Long & Short Cased xial Fans LC/SC contents introduction features & benefits specification performance dimensional data mounting silencer data accessories inverters & DCV controllers additional

More information

Pipe Hangers. 47 B-Line series Pipe Hangers & Supports

Pipe Hangers. 47 B-Line series Pipe Hangers & Supports Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable

More information

SLCX ATEX LONG CASED AXIAL FLOW FAN PLEASE CONTACT AERAULIQA DIRECLTY FOR A SPECIFIC FAN SELECTION ACCESSORIES APPLICATION FEATURES & BENEFITS

SLCX ATEX LONG CASED AXIAL FLOW FAN PLEASE CONTACT AERAULIQA DIRECLTY FOR A SPECIFIC FAN SELECTION ACCESSORIES APPLICATION FEATURES & BENEFITS ATEX LOG ASE AXAL FLOW FA ALATO ATEX ucted Axial Flow Fans suitable to exhaust/supply air in presence of chemical processes, water and sewage treatment, material and gas waste, dust and paint extraction,

More information

HVAC Automatic Balance Valve Index

HVAC Automatic Balance Valve Index HVC utomatic alance Index Weights Individual Weights Y-all Models Flow Rate (GPM) Connection Size Page 2519 0.50-5.00 1/4 to 3/4 V-SPEC-2519 2518 0.50-5.00 1/2 to 3/4 V-SPEC-2518 2517 0.50-9.00 1/2 to

More information

Orchard Residences. Buckley 18 IM Flash

Orchard Residences. Buckley 18 IM Flash EMTECH BS4568 / IEC61386 CLASS 3 CONDUIT PIPE EMTECH TM GI Conduit BS4568 / IEC61386 Class 3 EMTECH TM EMT-3 Conduit Box ITE West Marina Barrage Orchard Residences Buckley 18 IM Flash data listed in this

More information