a-life2 HP Climaveneta Technical Bulletin High pressure fan coils 2,88 8,6 kw Configuration User frendly Full integration Real savings

Transcription

1 Climaveneta Technical Bulletin A_IFE2_02_04_201306_EN High pressure fan coils 2,88 8,6 kw (The photo of the unit is purely indicative and may vary depending on the model) Configuration User frendly Full integration Real savings

2 SUMMARY 1. RANGE 3 2. GENERA DEsCRiPTioN 4 3. ACCEssoRiEs CoMPATiBiiTY 6 4. UNiT DEsCRiPTioN 7 5. operating imits 7 6. TEChNiCA DATA sheet 8 7. FAN PERFoRMANCEs PREssURE DRoP CoRRECTioN FACToRs in CooiNG operation WiTh GYCo WATER 18. CoRRECTioN FACToRs in heating operation WiTh GYCo WATER sound PoWER EVE sound PREssURE EVE FANCoi CoNTRos ACCEssoRiEs 24. DiMENsioNA DATA AND WATER CoNNECTioNs EECTRiCA CoNNECTioNs 44 This company participates in the Eurovent Certifi cation Programme. The products are listed in the Directory of certifi ed products. Eurovent certifi cation applied to units with cooling capacity up to 00 kw for air cooled water chillers and water cooled liquid chillers. Waiver of liability This publication represents the sole property of Climaveneta. Any reproduction or disclosure of such is strictly prohibited without the written authorisation of Climaveneta. This document has been prepared with maximum care and attention paid to the content shown. Nonetheless, Climaveneta waives all liability deriving from the use of such document. Read this document carefully. All work must be performed, components selected and materials used professionally and in complete accordance with the legislation in force in material in the country concerned, and considering the operating conditions and intended uses of the system, by qualified personnel. The data contained in this publication may be changed without prior notice. 2 A_IFE2_HP_0302_1204_201311_EN

3 1. RANGE DIO / DIV built-in version, low air intake DFIV / DFIO built-in version, front air intake 0 mm 0 mm Vertical wall mounted horizontal ceiling installation Vertical wall mounted horizontal ceiling installation 3 A_IFE2_HP_0302_1204_201311_EN

4 2. GENERA DESCRIPTION Fan Coil is a terminal unit for air conditioning during summer (cooling) and winter (heating). a-ife2 hp features more powerful, high pressure centrifugal fans for ducted installations, with 6-speed operation by auto transformer for sizes 0302 to 802, and 5 speed fans directly coupled to the motor for sizes 12 and sizes 902 and 02 have 6-speed fans directly coupled to the motor. Three speeds are set by Climaveneta to ensure best performance with the lowest possible noise. other speeds may be requested on the order by the customer. Output from 2,88 kw - 8,6 kw. Standard water fittings, reversible on site. sizes with high pressure centrifugal fans. structure made in metal panel, with inlet and outlet plastic grilles. Available wall mounted controls: PsW, MTW, ATW. Air filter on all models. DIV built-in version, low air intake, vertical installation DIO built-in version, low air intake, horizontal installation DFIV built-in version, front air intake, vertical installation DFIO built-in version, front air intake, horizontal installation 1 oad-bearing structure made from thick galvanised sheet metal, with holes for wall/ceiling mounting + thermal insulation and soundproofing on the inside (class M1) 2 high pressure centrifugal fan 3 Electric motor coupled directly to the fan 4 heat exchanger coil (1 coil for 2-pipe units; 2 coils for 4-pipe units) 5 Coil water connections 6 Manual air vent valve 7 Manual water drain valve 8 Condensate collection pan with drains + thermal insulation Condensate drain Air filter (filtration grade G2) A_IFE2_HP_0302_1204_201311_EN

5 2. GENERA DESCRIPTION a-ife2 hp DiV built-in version, low air intake, vertical installation a-ife2 hp Dio built-in version, low air intake, horizontal installation a-ife2 hp DFiV built-in version, front air intake, vertical installation a-ife2 hp DFio built-in version, front air intake, horizontal installation Dimensions Built-in version DIV DIV DIV DIV DIV DIV DIV DIV DIV DIV (mm) h (mm) s (mm) Built-in version DIO DIO DIO DIO DIO DIO DIO DIO DIO DIO (mm) h (mm) s (mm) A_IFE2_HP_0302_1204_201311_EN

6 3. ACCESSORIES COMPATIBIITY Description DFIO DIO DFIV DIV AiR inet GRiE + FiTER ife2 hp AiR outet GRiE + FiTER ife2 hp PENUM KiT ife2 hp inet AiR 90 PENUM KiT ife2 hp outet AiR 90 PENUM KiT ife2 hp streight outet PENUM KiT ife2 hp streight inet PENUM KiT ife2 hp CiRCUAR 1XD.200/180/160 (inet) PENUM KiT ife2 hp CiRCUAR 1XD.200/180/160 (outet) EECTRiCA heater TERMiNA MAMUT ip20 AUXiiARY CoNDENsATE TRAY VERTiCA inst. ife2 hp AUXiiARY CoNDENsATE TRAY horiz. inst. ife2 hp KiT VAV MAiN Coi 1/2" on/off 2V ife2 hp KiT VAV MAiN Coi 1/2" PWM 2V ife2 hp KiT VAV MAiN Coi 3/4" on/off 2V ife2 hp KiT VAV MAiN Coi 3/4" PWM 2V ife2 hp KiT VAV MAiN Coi 1/2" 3P ife2 hp KiT VAV MAiN Coi 3/4" 3P ife2 hp KiT VAV MAiN Coi 1/2" 0-V ife2 hp KiT VAV MAiN Coi 3/4" 0-V 2V ife2 hp KiT VAV MAiN Coi 1/2" on/off 3V ife2 hp KiT VAV MAiN Coi 1/2" PWM 3V ife2 hp KiT VAV MAiN Coi 3/4" on/off 3V ife2 hp KiT VAV MAiN Coi 3/4" PWM 3V ife2 hp KiT VAV MAiN Coi 1/2" 3P3V ife2 hp KiT VAV MAiN Coi 3/4" 3P3V ife2 hp KiT VAV MAiN Coi 1/2" 0-V 3V ife2 hp KiT VAV MAiN Coi 3/4" 0-V 3V ife2 hp KiT VAV ADD. Coi 1/2" on/off 2V ife2 hp KiT VAV ADD. Coi 1/2" PWM 2V ife2 hp KiT VAV ADD. Coi 1/2" 3P2V ife2 hp KiT VAV ADD. Coi 0-V 2V ife2 hp KiT VAV ADD. Coi 1/2 on/off 3V ife2 hp KiT VAV ADD. Coi 1/2" PWM 3V ife2 hp KiT VAV ADD. Coi 1/2" 3P3V ife2 hp KiT VAV ADD. Coi 0-V 3V ife2 hp WATER KiT FoR 3-WAYs 3/4" AND 2 BA VAVE WATER KiT FoR 2-WAYs 3/4 AND 2 BA VAVE WATER KiT FoR 3-WAYs 1/2" AND 2 BA VAVE WATER KiT FoR 2-WAYs 1/2 AND 2 BA VAVE MANUA DAMPER FoR BUiT-iN UNiTs ife2 hp MoT. DAMPER FoR BUiT-iN UNiTs ife2 hp DAMPER MoToR ife2 hp KiT ADDiTioNA Coi 1 RoW KiT REMoTE CoNTRo PsW CiMAVENETA ife2 hp KiT REMoTE CoNTRo REMoTo MTW CiMAVENETA ife2 hp KiT REMoTE CoNTRo ATW MoDBUs CiMAVENETA ife2 hp KiT PoWE BoARD ife2 hb KiT Rs485 ife2 hp KiT EsPANsioNE VAV. 0-VDC ife2 hp KiT EsPANsioNE VAV. 3PUNTi ife2 hp KiT BUs ADAPTER KiT GATEWAY BiTiCiNo KiT spb FoR MUTRiPE CoNNECTioNs KiT FEssiBE TUBEs ife2 hp 6 A_IFE2_HP_0302_1204_201311_EN

7 4. UNIT DESCRIPTION DIO, DIV DFIO, DFIV Bearing structure Galvanised steel frame with high rust resistance. insulated with self-extinuishing Class 1heat insulating panels. Unit fitted with condensate collection pan made from insulated galvanised sheet metal for horizontal and vertical installation. Double terminal block for power and control connections with quick connector for plug-in controls. Wall mounted controls are fixed by screws. Heat exchange Coil with corrugated aluminium fins and copper pipes, 0% tested with dried air. The water fittings are provided with anti-torsion lock with air vent and water drainage. All units are delivered with left-hand water connections, easily convertible into right-hand by simply turning the coil. Fan motor a-ife2 hp features more powerful, high pressure centrifugal fans for ducted installations, with 6-speed operation by auto transformer for sizes 0302 to 802, and 5 speed fans directly coupled to the motor for sizes 12 and sizes 902 and 02 have 6-speed fans directly coupled to the motor. Three speeds are set by Climaveneta to ensure best performance with the lowest possible noise. Different speed configurations are available (to be confirmed when ordering). Air filter Made of metal frame and hosting the filtering material, classification G2. Filter removal is completely safe, and is simplified by turning the guides at the side to release the filter. Bearing structure Galvanised steel frame with high rust resistance. insulated with self-extinuishing Class 1heat insulating panels. Unit fitted with condensate collection pan made from insulated galvanised sheet metal per the horizontal and vertical installation. Double terminal block for power and control connections with quick connector for plug-in controls. Wall mounted controls are fixed by screws. Heat exchange Coil with corrugated aluminium fins and copper pipes, 0% tested with dried air. The water fittings are provided with anti-torsion lock with air vent and water drainage. All units are delivered with left-hand water connections, easily convertible into right-hand by simply turning the coil. Fan motor a-ife2 hp features more powerful, high pressure centrifugal fans for ducted installations, with 6-speed operation by auto transformer for sizes 0302 to 802, and 5 speed fans directly coupled to the motor for sizes 12 and sizes 902 and 02 have 6-speed fans directly coupled to the motor. Three speeds are set by Climaveneta to ensure best performance with the lowest possible noise. Different speed configurations are available (to be confirmed when ordering). Air filter Made of metal frame and hosting the filtering material, classification G2. The filter removal requires a tool as safety measure (according with anti-tamper regulation). 5. OPERATING IMITS Maximum water inlet temp. 80 C Maximum working pressure: bar Minimum room air temperature: 0 C Maximum room air temperature 45 C Minimum average water temperature: The limits specified above refer to operation with the fan at minimum speed. During extended periods in which the fan is off and of cold water is flowing through the coil, condensate may form on the outside of the appliance; consequently, the three-way valve should be installed. MINIMUM AVERAGE WATER TEMPERATURE Wet bulb room temperature C. Dry bulb room temperature C FACTORY-SET SPEED - sizes from 2/4 to 02/04 - the standard factory wired speeds are other speeds can be selected upon Customer request on the order phase. - sizes from 12/14 to 1202/ the standard factory wired speeds are other speeds can be selected upon Customer request on the order phase. 7 A_IFE2_HP_0302_1204_201311_EN

8 6. TECHNICA DATA SHEET 8 A_IFE2_HP_0302_1204_201311_EN

9 6. TECHNICA DATA SHEET 9 A_IFE2_HP_0302_1204_201311_EN

10 6. TECHNICA DATA SHEET A_IFE2_HP_0302_1204_201311_EN

11 6. TECHNICA DATA SHEET 11 A_IFE2_HP_0302_1204_201311_EN

12 7. FAN PERFORMANCES a-ife2 hp is designed to assure high pressure also with pressure drops due to complex ducts. They come with six different fan speeds. A particular care has been reserved to the configurations of the three fan speeds cabled by the manufacturer. The other three fan speeds can be cabled on site. The graphs on the following pages show the useful head or working pressures in relation to the air flow and the fan speed. NoTE: the graphs refer to the versions with 3-row coils Prevalenza utile [Pa] - Static useful head [Pa] Portata aria [m 3 /h] - Air Flow [m 3 /h] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed 6 Prevalenza utile [Pa] - Static useful head [Pa] Portata aria [m 3 /h] - Air Flow [m 3 /h] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed 6 Prevalenza utile [Pa] - Static useful head [Pa] Portata aria [m 3 /h] - Air Flow [m 3 /h] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed 6 12 A_IFE2_HP_0302_1204_201311_EN

13 7. FAN PERFORMANCES Prevalenza utile [Pa] - Static useful head [Pa] Portata aria [m 3 /h] - Air Flow [m 3 /h] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed 6 Prevalenza utile [Pa] - Static useful head [Pa] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed Portata aria [m 3 /h] - Air Flow [m 3 /h] Prevalenza utile [Pa] - Static useful head [Pa] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed Portata aria [m 3 /h] - Air Flow [m 3 /h] 13 A_IFE2_HP_0302_1204_201311_EN

14 7. FAN PERFORMANCES Prevalenza utile [Pa] - Static useful head [Pa] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed Portata aria [m 3 /h] - Air Flow [m 3 /h] Prevalenza utile [Pa] - Static useful head [Pa] Portata aria [m 3 /h] - Air Flow [m 3 /h] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 4 Velocità media Medium Speed 5 Velocità minima Minimum Speed Prevalenza utile [Pa] - Static useful head [Pa] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 Velocità media Medium Speed 4 Velocità minima Minimum Speed Portata aria [m 3 /h] - Air Flow [m 3 /h] 14 A_IFE2_HP_0302_1204_201311_EN

15 7. FAN PERFORMANCES Prevalenza utile [Pa] - Static useful head [Pa] Velocità cablate in fabbrica Factory Wired speed 1 2 Velocità massima Maximum speed 3 Velocità media Medium Speed 4 Velocità minima Minimum Speed Portata aria [m 3 /h] - Air Flow [m 3 /h] A_IFE2_HP_0302_1204_201311_EN

16 8. PRESSURE DROP MAIN COI COOING (2 pipes) Perdita di carico [kpa] - Pressure drop [kpa] , 1,00 Portata acqua [m 3 /h] - Water Flow [m 3 /h] MAIN COI HEATING (2 pipes) Perdita di carico [kpa] - Pressure drop [kpa] , Portata acqua [m 3 /h] - Water Flow [m 3 /h] 1,00 ADDITIONA COI HEATING (4 pipes) Perdita di carico [kpa] - Pressure drop [kpa] , Portata acqua [m 3 /h] - Water Flow [m 3 /h] 1,00 16 A_IFE2_HP_0302_1204_201311_EN

17 8. PRESSURE DROP MAIN COI COOING (2 pipes) Perdita di carico [kpa] - Pressure drop [kpa] , 1,50 Portata acqua [m 3 /h] - Water Flow [m 3 /h] MAIN COI HEATING (2 pipes) Perdita di carico [kpa] - Pressure drop [kpa] , 1,50 Portata acqua [m 3 /h] - Water Flow [m 3 /h] ADDITIONA COI HEATING (4 pipes) Perdita di carico [kpa] - Pressure drop [kpa] , Portata acqua [m 3 /h] - Water Flow [m 3 /h] 1,00 17 A_IFE2_HP_0302_1204_201311_EN

18 9. CORRECTION FACTORS IN COOING OPERATION WITH GYCO WATER GYCO WATER AT % Fattore di correzione - Correction factor 1,2 1,1 1,0 0,9 0, C Perdite di carico Pressure drop Resa Capacity Portata Water flow GYCO WATER AT 20% Fattore di correzione - Correction factor 1,2 1,1 1,0 0,9 0,8 0,7 0, C Perdite di carico Pressure drop Resa Capacity Portata Water flow GYCO WATER AT 35% Fattore di correzione - Correction factor 1,6 1,5 1,4 1,3 1,2 1,1 1,0 0,9 0,8 0,7 0,6 0, C Perdite di carico Pressure drop Resa Capacity Portata Water flow 18 A_IFE2_HP_0302_1204_201311_EN

19 . CORRECTION FACTORS IN HEATING OPERATION WITH GYCO WATER GYCO WATER AT % Fattore di correzione - Correction factor 1,4 1,3 1,2 1,1 1,0 0,6 0, C Perdite di carico Pressure drop Resa Capacity Portata Water flow GYCO WATER AT 20% Fattore di correzione - Correction factor 1,4 1,3 1,2 1,1 1,0 0,6 0, C Perdite di carico Pressure drop Resa Capacity Portata Water flow GYCO WATER AT 35% Fattore di correzione - Correction factor 1,4 1,3 1,2 1,1 1,0 0,6 0, C Perdite di carico Pressure drop Resa Capacity Portata Water flow 19 A_IFE2_HP_0302_1204_201311_EN

20 11. SOUND POWER EVE Model sound power level min. speed db(a) sound power level med. speed db(a) sound power level max. speed db(a) sound power on the basis of measurements made in compliance with Eurovent 8/ Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 49,2 48,4 50,2 45,5 44,1 35,0 24,9 db(a) Medium speed 51,9 53,5 55,3 50,6 48,7 43,7 34,7 Maximum speed 59,6 60,7 62,5 57,45 54,98 52,01 43, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 52,2 51,4 53,2 48,5 47,1 38,0 27,9 db(a) Medium speed 58,9 60,5 62,3 57,6 55,7 50,7 41,7 Maximum speed 63,6 64,7 66,5 61,4 59,0 56,0 47, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 45,9 43,7 43,9 36,8 28,0 21,1 25,4 db(a) Medium speed 50,8 49,4 50,7 44,8 38,5 29,0 25,9 Maximum speed 55,7 54,4 55,8 51,2 47,4 39,7 30, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 52,9 50,7 50,9 43,8 35,0 28,1 32,4 db(a) Medium speed 53,8 52,4 53,7 47,8 41,5 32,0 28,9 Maximum speed 59,7 58,4 59,8 55,2 51,4 43,7 34, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 43,1 45,3 46,4 41,0 37,8 27,3 19,5 db(a) Medium speed 44,8 48,5 49,5 44,3 42,0 34,9 25,2 Maximum speed 56,7 59,5 60,1 55,8 53,1 49,0 40, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 46,1 48,3 49,4 44,0 40,8 30,3 22,5 db(a) Medium speed 52,8 56,5 57,5 52,3 50,0 42,9 33,2 Maximum speed 59,7 62,5 63,1 58,8 56,1 52,0 43, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 49,8 54,5 55,7 49,7 49,0 43,0 34,1 db(a) Medium speed 54,5 58,7 58,8 53,9 52,7 48,9 41,0 Maximum speed 56,1 61,1 61,0 56,8 55,0 52,9 45, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 53,8 58,5 59,7 53,7 53,0 47,0 38,1 db(a) Medium speed 57,5 61,7 61,8 56,9 55,7 51,9 44,0 Maximum speed 61,1 66,1 66,0 61,8 60,0 57,9 50, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 57,3 60,9 62,1 57,0 54,4 50,7 44,5 db(a) Medium speed 58,1 61,7 62,6 57,6 54,9 51,7 45,8 Maximum speed 60,0 63,9 65,0 60,0 57,5 54,5 48, Hz 250 Hz 500 Hz 1 khz 2 khz 4 khz 8 khz Minimum speed 57,3 60,9 62,1 57,0 54,4 50,7 44,5 db(a) Medium speed 60,1 63,7 64,6 59,6 56,9 53,7 47,8 Maximum speed 62,0 65,9 67,0 62,0 59,5 56,5 50,9 12. SOUND PRESSURE EVE Modelo sound pressure level at the minimum air flow db(a) sound pressure level at the average air flow db(a) sound pressure level at the maximum air flow db(a) sound pressure levels in semi-anechoic chamber 1 (m) from fan at front and 1 (m) above the floor 20 A_IFE2_HP_0302_1204_201311_EN

21 13. FANCOI CONTROS PSW wall-mounted control The PsW control is used to regulate the airflow (3 speeds), select the summer/winter mode of operation and switch the fan-coil on/off and hot start function by minimun thermostat kit. Function selector Cooling heating off Fan selector Maximum fan speed Medium fan speed Minimum fan speed Electrical connections GNYE BN BU N PE Com Min Med Max MV C X1 N UNITA 2-TUBI: Eseguire questo collegamento sempre in caso di una sola valvola. 2-PIPES UNIT: Always carry out this connection when there is just one valve. BU 8 7 BN Giallo/Verde-Yellow/Green Marrone - Brown Blu - Blue Valvola Valve WH RD Fase (linea 230V~) - Phase (230V~line) Neutro - Neutral Terra - Earth Comune ventilatore - Common of the fan Velocità Minima - Min. speed (ow) Velocità Media - Med. speed (Medium) Velocità Massima - Max. speed (High) Bianco - White Rosso Red Motore ventilatore Fan motor Condensatore Capacitor Eventuale dispositivo intermedio (es.: Connettore, Autotrasformatore, ecc.) Possible intermediate equipment (ex.: Connector, Autotransformer, etc.) BT2 Sonda acqua Water sensor ACCESSORI ACCESSORIES YV1 Valvola batteria principale Principal coil valve YV2 Valvola batteria aggiuntiva Secondary coil valve IG IG 2 1 N N PE 230V~50/60Hz Acqua - Water BU BN 9 BU 8 7 BN 6 5 Com 4 Max 3 Med 2 Min 1 GNYE BT2 MV Interruttore di protezione (a cura del cliente) - Thermomagnetic switch (by the customer) X1 YV2 YV1 C 21 A_IFE2_HP_0302_1204_201311_EN

22 13. FANCOI CONTROS MTW wall-mounted control The MTW control is used to regulate the air (3 speeds), the temperature through electronic thermostat, to select the summer/winter mode of operation and to switch the fan-coil on/off. Temperature selector Adjust the temperature as required by turning the temperature selector from +14 C to 30 C. ed Blue ed: indicates fan-coil thermostat call Function selector Cooling heating off Fan selector Maximum fan speed Medium fan speed Minimum fan speed Electrical connections J GNYE BN BU N PE Com Min Med Max MV C X1 N UNITA 2-TUBI: Eseguire questo collegamento sempre in caso di una sola valvola. 2-PIPES UNIT: Always carry out this connection when there is just one valve. BU 8 7 BN Giallo/Verde-Yellow/Green Marrone - Brown Blu - Blue Valvola Valve WH RD Fase (linea 230V~) - Phase (230V~line) Neutro - Neutral Terra - Earth Comune ventilatore - Common of the fan Velocità Minima - Min. speed (ow) Velocità Media - Med. speed (Medium) Velocità Massima - Max. speed (High) Bianco - White Rosso Red Motore ventilatore Fan motor Condensatore Capacitor Eventuale dispositivo intermedio (es.: Connettore, Autotrasformatore, ecc.) Possible intermediate equipment (ex.: Connector, Autotransformer, etc.) BT2 Sonda acqua Water sensor ACCESSORI ACCESSORIES YV1 Valvola batteria principale Principal coil valve YV2 Valvola batteria aggiuntiva Secondary coil valve IG IG 2 1 N N PE 230V~50/60Hz Acqua - Water BU BN 9 BU 8 7 BN 6 5 Com 4 Max 3 Med 2 Min 1 GNYE BT2 MV Interruttore di protezione (a cura del cliente) - Thermomagnetic switch (by the customer) X1 YV2 YV1 C 22 A_IFE2_HP_0302_1204_201311_EN

23 13. FANCOI CONTROS ATW wall-mounted control The ATW control is used to regulate the air (3 speeds + auto), the temperature through electronic thermostat, to select the summer / winter / auto mode of operation and to switch the fan-coil on / off. Temperature selector Adjust the temperature as required by turning the temperature selector from +14 C to 30 C. Function selector select the mode of operation pushing the button. Mode led Cooling heating Automatic setting Speed button select the fan speed pushing the button. The repeated pressure of fan button determines speed required. Maximum fan speed Medium fan speed Minimum fan speed Automatic fan speed off: press the button MoDE changing modes till all leds are turned off. (heat --> Coo --> AUTo --> off) ed Blue ED: heating / Cooling plus regulator call Blue ED blinking: hot start / Too Cool function active Blue ED: operation in Cooling mode Blue ED: operation in heating mode Blue ED: automatic cooling / heating mode selection Electrical connections Collegamento con accessorio Resistenza elettrica Connection with accessory Electrical heater Power Min = BK-RD Relay WH Resist.el. El.heater Power Max = WH-RD 12 RD BK Termostati Sicurezza: 11 TS1 riamo automatico BU TS1 TS2 TS2 riarmo manuale BU 9 Safety Thermostats: TS1 automatic reset 230V~50/60Hz TS2 manual reset GNYE BN BU N PE Com Min Med Max MV C X1 N Giallo/Verde-Yellow/Green Marrone - Brown Blu - Blue WH RD BK Fase (linea 230V~) - Phase (230V~line) Neutro - Neutral Terra - Earth Bianco - White Rosso - Red Nero - Black Comune ventilatore - Common of the fan Velocità Minima - Min. speed (ow) Velocità Media - Med. speed (Medium) Velocità Massima - Max. speed (High) Motore ventilatore Fan motor Condensatore Capacitor Eventuale dispositivo intermedio (es.: Connettore/Autotrasf./ecc.) Possible intermediate equipment (ex.: Connector/Autotransf./etc.) BT2 Sonda acqua Water sensor ACCESSORI ACCESSORIES YV1 Valvola batteria principale Principal coil valve YV2 Valvola batteria aggiuntiva Secondary coil valve J5 Kit GATEWAY J5 Kit BUS-ADAPTER AT TT AT TT GATEWAY TT BUS BTICINO BUS-ADAPTER TT BUS N 230V~ IG N N PE 230V~50/60Hz BU BN 9 BU 8 7 BN 6 5 Com 4 Max 3 Med 2 Min 1 GNYE SA1 Acqua - Water IG Interruttore di protezione (a cura del cliente) - Thermomagnetic switch (by the customer) SA1 Contatto multifunzionale (a cura del cliente) Multifunctional contact (by the customer) X1 BT2 YV2 YV1 MV C 23 A_IFE2_HP_0302_1204_201311_EN

24 14. ACCESSORIES Main coil 2-way valve unit 1/2" and 3/4" kit Kit with copper fittings and electromechanical actuator (onoff) 230V, PWM, 0-V and suitable for 2-pipe systems. This kit may be used to stop the flow of water of the main coil in the fan coils. The electromechanical actuator is NC. Additional coil 2-way valve unit 1/2" kit Kit with copper fittings and electromechanical actuator (onoff) 230V, PWM, 0-V and suitable for 4-pipe systems. This kit may be used to stop the flow of water of the additional coil in the fan coils. The electromechanical actuator is NC. Main coil 3-way valve unit with by-pass way (4 idraulic connections) 1/2" and 3/4 kit Kit with copper fittings and electromechanical actuator (onoff) 230V, PWM, 0-V and suitable for 2-pipe systems. This kit may be used to divert the flow of water of the main coil in the fan coils. The electromechanical actuator is NC. Additional coil 3-way valve unit with by-pass way (4 idraulic connections) 1/2" kit Kit with copper fittings and electromechanical actuator (onoff) 230V, PWM, 0-V and suitable for 4-pipe systems. This kit may be used to divert the flow of water of the additional coil in the fan coils. The electromechanical actuator is NC. Water circuit kits Water circuit kits complete with copper pipes and 2 ball valves, only available as accessories, not fitted on the unit. Hot water coil kit The additional hot water 1 row is installed on top of the main coil in the four-pipe systems. Using the controls with the additional coil valve kit, the additional coil may be regulated by selecting the suitable mode of operation. Horizontal Fan Coil auxiliary tray Made in thermoplastic material, this tray collects the condensate that forms during summer operation. The kit is suitable for horizontal fan coil installations. Vertical Fan Coil auxiliary tray Made from insulated galvanised sheet metal, this pan collects the condensate that forms during cooling operation. Interface SPB kit The spb interface kit is used for multiple connection of hydronic terminal units, which may be managed with a single control. For correct installation, install an spb interface on every terminal unit. Hose kit The hose kit is a manifold coupling for connecting the fan coil to the main water system. Air intake grid with filter Grid with simple filter removal in order to easify cleaning maintenance without access directly to the fan coil installed into the duct. Air outlet grid Grid with orientable louvers for installation in ducted system. Manual damper kit for fresh air intake. This kit is used to control the external fresh air that is put into the room. The quantity of air put into the room varies from 0 to approx. 30% of the volume handled by the fan coil. Motor drive for external air intake lock Motor drive for automatic adjustment of the fresh air intake lock or damper. Straight plenum kit for air outlet Made in galvanised sheet metal, this kit allows air conveyance into ducts in horizontal and vertical built-in installations. Angular plenum kit for air outlet (90 ) Made in galvanised sheet metal, this kit allows air conveyance into ducts lying at 90 to the fan coil outlet. suitable for horizontal and vertical built-in installations. Plenum kit with roud air ducts Made in galvanised sheet metal, this kit allows air conveyance into round ducts in horizontal and vertical built-in installations. Straight plenum kit for air inlet Made in galvanised sheet metal, this kit allows air conveyance into ducts in horizontal and vertical built-in installations. Angular plenum kit for air inlet (90 ) Made in galvanised sheet metal, this kit allows air conveyance into ducts lying at 90 to the fan coil outlet. suitable for horizontal and vertical built-in installations. Pair of decorative and structural feet Plastic feet, granting a uniform colour and design, with cabinet. This kit supports fan coil with cabinet. Rear panel for vertical housing kit This kit covers the back side of the fan coil with cabinet. it is necessary to installation separate from the wall. The user can not access to the terminal block. 24 A_IFE2_HP_0302_1204_201311_EN

25 14. ACCESSORIES VAVE KIT MODUANTING 0-V - 2 WAYS 1/2 FITTINGS The 2 ways Valve Kit 0-V for principal or added coils, allow the water flow of the respective coil, to be diverted on the fancoil. The kit Valves can be managed directly from Climaveneta Controls. The power board hb and the Expantion modul 0-V must be installed on board. 2 WAYS MAIN COI KIT VAVE 1/2" AND MODUANTING ACTUATOR 0-V 2 WAY ADDITIONA COI KIT VAVE 1/2" AND MODUANTING ACTUATOR 0-V 2 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 1/2-1/2 AND MODUANTING ACTUATOR 0-V VAVE KIT MODUANTING 0-V - 2 WAYS 3/4 FITTINGS The 2 ways Valve Kit 0-V for principal or added coils, allow the water flow of the respective coil, to be diverted on the fancoil. The kit Valves can be managed directly from Climaveneta Controls. The power board hb and the Expantion modul 0-V must be installed on board. 2 WAYS MAIN COI KIT VAVE 3/4" AND MODUANTING ACTUATOR 0-V 2 WAY ADDITIONA COI KIT VAVE 3/4" AND MODUANTING ACTUATOR 0-V 2 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 1/2-3/4 AND MODUANTING ACTUATOR 0-V 25 A_IFE2_HP_0302_1204_201311_EN

26 14. ACCESSORIES MAIN COI VAVE KIT - 2 WAY - 1/2" FITTINGS (ON/OFF - PWM) This valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan. 2 WAYS MAIN COI KIT VAVE 1/2" + ACTUATOR 230V 2 Way additional Coil Kit valve 1/2" + actuator 230v 2 Way Main and additional Coil Kit valve With by Pass 1/2''-1/2'' + actuator 230v MAIN COI VAVE KIT - 2 WAY - 3/4" FITTINGS (ON/OFF - PWM) This valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan. 2 WAYS MAIN COI KIT VAVE 3/4 2 WAY ADDITIONA COI KIT VAVE 1/2 2 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 3/4 AND 1/2 26 A_IFE2_HP_0302_1204_201311_EN

27 14. ACCESSORIES VAVE KIT MODUANTING 0-V - 3 WAYS - 1/2 FITTINGS The 3 ways Valve Kit 0-V for principal or added coils, allow the water flow of the respective coil, to be diverted on the fancoil. The kit Valves can be managed directly from Climaveneta Controls. The power board hb and the Expantion modul 0-V must be installed on board. 3 WAYS MAIN COI KIT VAVE 1/2" + BY- PASS 1/2 + MODUANTING ACTUATOR 0-V 3 WAY ADDITIONA COI KIT VAVE 1/2" + BY-PASS 1/2 + MODUANTING ACTUA- TOR 0-V 3 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 1/2-1/2 + MODUANTING ACTUATOR 0-V VAVE KIT MODUANTING 0-V - 3 WAYS - 3/4 FITTINGS The 3 ways Valve Kit 0-V for principal or added coils, allow the water flow of the respective coil, to be diverted on the fancoil. The kit Valves can be managed directly from Climaveneta Controls. The power board hb and the Expantion modul 0-V must be installed on board. 3 WAYS MAIN COI KIT VAVE WITH BY PASS 3/4" AND MODUANTING ACTUA- TOR 0-V 3 WAY ADDITIONA COI KIT VAVE WITH 1/2" BYPASS AND MODUANTING ACTUA- TOR 0-V 3 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 3/4 AND 1/2 AND MODUANTING ACTUATOR 0-V 27 A_IFE2_HP_0302_1204_201311_EN

28 14. ACCESSORIES MAIN COI VAVE KIT - 3 WAY - 1/2" FITTINGS (ON/OFF - PWM) The valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan. 3 WAYS MAIN COI KIT VAVE WITH 1/2" BYPASS + ACTUATOR 3 WAYS ADDITIONA COI KIT VAVE WITH BY PASS 1/2" + ACTUATOR 3 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 1/2-1/2'' + ACTUA- TOR MAIN COI VAVE KIT - 3 WAY - 3/4" FITTINGS (ON/OFF - PWM) The valve kit allows the main coil water flow to be diverted for fan coil with centrifugal fan. 3 WAY ADDITIONA COI KIT VAVE WITH 1/2" BYPASS 3 WAYS MAIN COI KIT VAVE WITH BY PASS 3/4" 3 WAY MAIN AND ADDITIONA COI KIT VAVE WITH BY PASS 3/4 AND 1/2'' 28 A_IFE2_HP_0302_1204_201311_EN

29 14. ACCESSORIES WATER KIT FOR 2-WAYS VAVE 1/2" FITTING WATER KIT FOR 2-WAYS VAVE 3/4" FITTING WATER KIT FOR 3-WAYS VAVE + BY-PASS 1/2" FITTING WATER KIT FOR 3-WAYS VAVE + BY-PASS 3/4" FITTING ADDITIONA HOT WATER COI KIT This accessory kit is used for heating mode in four-pipe systems. 29 A_IFE2_HP_0302_1204_201311_EN

30 14. ACCESSORIES AIR SUPPY PENUM KIT The plenum kit allows connection to the ductwork. STRAIGHT PENUM Description Qty. straight plenum 1 self-tapping screws Ø 3.5x A (mm) B (mm) C (mm) PENUM 140 Description Qty. 90 plenum 1 self-tapping screws Ø 3.5x A A (mm) ROUND PIPES PENUM Ø A 2 Description Qty. Round pipes plenum 1 self-tapping screws Ø 3.5x B A (mm) B (mm) N. pipes A_IFE2_HP_0302_1204_201311_EN

31 14. ACCESSORIES STRAIGHT PENUM: Made of galvanized steel, it is used to convey the air supply on the concealed units. optional suitable for installation on all concealed versions without cabinet. STRAIGHT PENUM (PM) H = S = Flangia da mm mm flange 90 PENUM: Made of galvanized steel, it is used to convey the air supply on the concealed units. optional suitable for installation on all concealed versions without cabinet. 90 PENUM (PM 90 ) H = S = Flangia da mm mm flange H = Dimensioni in mm Dimensions in mm Model 2 pipe system (1 coil) pipe system (2 coil) Dimensions (mm) Flangia da mm mm flange 140 H = Dimensioni in mm Dimensions in mm Flangia da mm mm flange Model 2 pipe system (1 coil) pipe system (2 coil) Dimensions (mm) A_IFE2_HP_0302_1204_201311_EN

32 14. ACCESSORIES ROUND PIPES PENUM: Made of galvanized steel + internal Thermal-acoustic insulation, it is used to convey the air supply on the concealed units. optional suitable for installation on all concealed versions without cabinet. ROUND PIPES PENUM Ø A/2 A A/2 H = S = 2 Ø 160 Ø No. x Ø H = = Ø 200 Ø 2 = Dimensioni in mm Dimensions in mm Model 2 pipe system (1 coil) pipe system (2 coil) Dimensions A (mm) Dimensions (mm) N x d. (mm) 2x 2x 2x 2x 3x 3x 4x 4x 4x 4x Spigots (made of plastic material): Ø 160, 180, A_IFE2_HP_0302_1204_201311_EN

33 14. ACCESSORIES PENUM KIT FOR AIR OUTET The plenum kit allows connection to the ductwork. STRAIGHT PENUM Description Qty. straight plenum 1 self-tapping screws Ø 3.5x A (mm) B (mm) C (mm) PENUM 140 Description Qty. 90 plenum 1 self-tapping screws Ø 3.5x A A (mm) ROUND PIPES PENUM Ø A 2 Description Qty. Round pipes plenum 1 self-tapping screws Ø 3.5x B A (mm) B (mm) N. pipes A_IFE2_HP_0302_1204_201311_EN

34 14. ACCESSORIES STRAIGHT PENUM: Made of galvanized steel, it is used to convey the air intake on the concealed units. optional suitable for installation on all concealed versions without cabinet. STRAIGHT PENUM (PM) ,5 0 H = 450 S = 2 37,5 Flangia da mm mm flange 0 0 Dimensioni in mm Dimensions in mm H = 450 Flangia da mm mm flange H = S = 2 H = Flangia da mm mm flange Model 2 pipe system (1 coil) pipe system (2 coil) Dimensions (mm) PENUM: Made of galvanized steel, it is used to convey the air intake on the concealed units. optional suitable for installation on all concealed versions without cabinet. 90 PENUM (PM 90 ) Dimensioni in mm Dimensions in mm Flangia da mm mm flange Model 2 pipe system (1 coil) pipe system (2 coil) Dimensions (mm) A_IFE2_HP_0302_1204_201311_EN

35 14. ACCESSORIES ROUND PIPES PENUM: Made of galvanized steel + internal Thermal-acoustic insulation, it is used to convey the air intake on the concealed units. optional suitable for installation on all concealed versions without cabinet. ROUND PIPES PENUM Ø A/2 A A/ H = H = = 2 Ø 200 Ø 180 Ø 160 S = 2 = Filtro aria Air filter 50 0 No. x Ø Dimensioni in mm Dimensions in mm Model 2 pipe system (1 coil) pipe system (2 coil) Dimensions A (mm) Dimensions (mm) N x d. (mm) 2x 2x 2x 2x 3x 3x 4x 4x 4x 4x Spigots (made of plastic material): Ø 160, 180, A_IFE2_HP_0302_1204_201311_EN

36 14. ACCESSORIES AUXIIARY CONDENSATE TRAY KIT FOR HORIZONTA INSTAATION The auxiliary condensate tray is designed to collect the condensate which is formed on coil connections during operation in the cooling mode. AUXIIARY CONDENSATE TRAY KIT FOR VERTICA INSTAATION The auxiliary condensate tray is designed to collect the condensate which is formed on coil connections during operation in the cooling mode. SPB INTERFACE KIT 71 mm 60 mm 90 mm 36 A_IFE2_HP_0302_1204_201311_EN

37 14. ACCESSORIES HOSE CONNECTION KIT The hose kit is a joint collector for connecting the fan coil to the mains water supply. SIGIARE CON MASTICE DI TENUTA SEA WITH MASTIC SEAING AIR INTAKE GRID WITH FITER Kit accessory for air inlet of duct system. Accessory is provided with air filter B A GRIGIA / GRIE FITRO ARIA / AIR FITER TEAIO DI CONTENIMENTO FITRO FRAME FITER A (mm) B (mm) A_IFE2_HP_0302_1204_201311_EN

38 14. ACCESSORIES AIR OUTET GRIE Kit accessory is used for air outlet in duct system. Air grille has adjustable louvers B A A (mm) B (mm) FRESH AIR INTAKE DAMPER KIT The air intake damper can be installed on ife2 hp fan coils with air intake from below, in the built-in version. KIT A Manual fresh air intake damper kit. The kit is used to adjust the amount of fresh air introduced into the environment. The amount of fresh air introduced varies from 0 to approx. 30% of the volume handled by the fan coil. KIT B Motorised fresh air intake damper kit. Motor for motorised damper position adjustment. The two kits are supplied separately with their own product codes. The air intake damper can be installed on ife2 hp fan coils with air intake from below, in the built-in version. KIT C Motor for fresh air intake damper DAMPER FOR BUIT-IN UNITS KIT A (manual damper) KIT B (motorised damper) FASTEN THE DAMPER OPENING WITH THE Ø3.9X9.5 SCREW DAMPER MOTOR 2 X 6MA NUTS FOR FASTENING ON THE PIN 38 A_IFE2_HP_0302_1204_201311_EN

39 14. ACCESSORIES MRS1 TERMINA BOCK KIT FOR ASYNCHRONOUS FC Terminal block featuring a number of terminals based on unit configuration (min. PE ) ; (max PE+.12) Wiring according to the requirements of the configuration Collegamento con accessorio RESISTENZA EETTRICA Connection with accessory EECTRICA HEATER GNYE BN BU N PE Com Min Med Max MV C X1 Giallo/Verde-Yellow/Green Marrone - Brown Blu - Blue WH RD BK Bianco - White Rosso - Red Nero - Black Fase (linea 230V~) - Phase (230V~line) Neutro - Neutral Terra - Earth Comune ventilatore - Common of the fan Velocità Minima - Min. speed (ow) Velocità Media - Med. speed (Medium) Velocità Massima - Max. speed (High) Motore ventilatore Fan motor Condensatore Capacitor Eventuale dispositivo intermedio (es.: Connettore, Autotrasformatore, ecc.) - Possible intermediate equipment (ex.: Connector, Autotransformer, etc.) ACCESSORI ACCESSORIES YV1 Valvola batteria principale Principal coil valve YV2 Valvola batteria aggiuntiva Secondary coil valve A CURA DE CIENTE - BY THE CUSTOMER CR IG Termostati Sicurezza: TS1 riamo automatico TS2 riarmo manuale Safety Thermostats: TS1 automatic reset TS2 manual reset Comando remoto - Remote control Interruttore di protezione - Thermomagnetic switch 230V~50/60Hz N PE 230V~50/60Hz IG N Potenza - Power Potenza - Power N CR N N N Relay BU BN BU BN Com Max Med Min GNYE WH BK BU BU X1 Resist.el. El.heater TS1 YV2 YV1 MV Note: Standard solo morsetti PE,1,2,3,4 (morsetti 5.12 presenti solo se installati i relativi accessori) Standard only terminals PE,1,2,3,4 (terminals 5 12 exist if related accessories are installed) RD TS2 Power Min = BK-RD / Power Max = WH-RD C 39 A_IFE2_HP_0302_1204_201311_EN

40 . DIMENSIONA DATA AND WATER CONNECTIONS (VERTICA VERSION) Fan coils have been designed and made for installation in heating and air-conditioning systems A B Attacchi idraulici 1/2'' GF Water connections 1/2'' Female ,9 C D Ø20 Ø Ø A (mm) B (mm) C (mm) D (mm) ,8 185,8 40 A_IFE2_HP_0302_1204_201311_EN

41 . DIMENSIONA DATA AND WATER CONNECTIONS (HORIZONTA VERSION) Fan coils have been designed and made for installation in heating and air-conditioning systems Ø Attacchi idraulici 1/2'' GF Water connections 1/2'' Female C D Ø Ø , A B E 3 40 E A (mm) B (mm) C (mm) D (mm) E (mm) ,8 185,8 41 A_IFE2_HP_0302_1204_201311_EN

42 INVERTING THE WATER CONNECTIONS WARNING! Run the electrical wiring on the opposite side to the final water connections. Remove the transformer and the terminal block and reposition them on the opposite side. If the room temperature probe cable is not long enough, move the room temperature probe to the opposite side. INSTRUCTIONS TO MOVE THE MAIN COI FROM EFT TO RIGHT ON VERTICA FAN COIS 1 A D 8 G B 2 E 9 H 4 C F To remove the funnel, press the lock and rotate A. Unscrew the 4 x Ø 3.9x9.5 screws B. Remove the panel in the direction indicated by the arrow 2. Unscrew the 4 x Ø 3.9x9.5 screws 3 that support the coil from the left and right shoulders. C. slightly tilt the coil in the direction indicated by the arrow 4 and move it away from the left shoulder in the direction indicated by arrow 5. Press the catch that holds the funnel 6 to release it. D. Move the coil from pos. 7 to pos. 8. E. open the knock-outs on the opposite shoulder 9. insert the coil at an angle, as shown in the figure, inserting the water connections through the openings made. F. Tighten the 4 x Ø 3.9x9.5 screws in the holes aligning the shoulder - coil bracket 11, on the right and left shoulders. Remove the knock-out 12 and insert the funnel, making sure it is secured in place. G. Reposition the panel 13 and tighten the 4 x Ø 3.9x9.5 screws 14. H. Use closed-cell insulation to cover in the holes left open on the left shoulder. INSTRUCTIONS TO MOVE THE MAIN COI FROM RIGHT TO EFT ON VERTICA FAN COIS To invert the position of the coil, follow the previous instructions, swapping the references to the right shoulder and left shoulder. 42 A_IFE2_HP_0302_1204_201311_EN

43 INVERTING THE WATER CONNECTIONS WARNING! Run the electrical wiring on the opposite side to the final water connections. Remove the transformer and the terminal block and reposition them on the opposite side. If the room temperature probe cable is not long enough, move the room temperature probe to the opposite side. INSTRUCTIONS TO MOVE THE MAIN COI FROM EFT TO RIGHT ON HORIZONTA FAN COIS: A 1 D 7 G 96, B E 9 13 H C F 5 A. Unscrew the 4 x Ø 3.9x9.5 screws B. Remove the panel in the direction indicated by the arrow 2. Unscrew the 4 x Ø 3.9x9.5 screws 3 that support the coil from the left and right shoulders. C. slightly tilt the coil in the direction indicated by the arrow 4 and move it away from the left shoulder in the direction indicated by arrow 5. D. Move the coil from pos. 6 to pos. 7. E. open the knock-outs on the opposite shoulder 8. insert the coil at an angle, as shown in the figure 9, inserting the water connections through the openings made. F. Tighten the 4 x Ø 3.9x9.5 screws in the holes aligning the shoulder - coil bracket, on the right and left shoulders. G. Reposition the panel 11, ensuring the distance of 96.5 mm, as shown in the figure. H. Tighten the 4 x Ø 3.9x9.5 screws 12. Use closed-cell insulation to cover in the holes left open on the left shoulder 13. INSTRUCTIONS TO MOVE THE MAIN COI FROM RIGHT TO EFT ON HORIZONTA FAN COIS To invert the position of the coil, follow the previous instructions, swapping the references to the right shoulder and left shoulder. 43 A_IFE2_HP_0302_1204_201311_EN

44 16. EECTRICA CONNECTIONS The fan coil comes fully wired and only requires: - Connecting to the mains electricity supply and to any room control. it is also recommended to check that: - The characteristics of the mains electricity supply are suitable for the input indicated in the table below, which (with maximum values) should serve for sizing both the circuit breakers and the power cables (any other appliances working in parallel should also be taken into consideration). - The supply voltage corresponds to the rated value +/- %. The following is compulsory: installation near the appliance of a delayed-action singlepole linked magnetothermal circuit breaker, padlockable, line isolating switch, in compliance with CEi-EN standards (contact separation of at least 3 mm). Table electrical connections Sizing table Power supply Max. input (W) Max. absorbed current (A) ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ ,30 Sizing table with HEATER power 1 Power supply Max. input (W) Max. absorbed current (A) ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ ,00 Sizing table with HEATER power 2 Power supply Max. input (W) Max. absorbed current (A) ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ , ~ ,40 44 A_IFE2_HP_0302_1204_201311_EN

45

46 Climaveneta S.p.A. Via Sarson 57/c Bassano del Grappa (VI) Italy Tel Fax Climaveneta France 3, Village d Entreprises ZA de la Couronne des Prés Avenue de la Mauldre Epône France Tel +33 (0) Fax +33 (0) info@climaveneta.fr Climaveneta Deutschland GmbH yrenstraße Bochum Germany Tel Fax info@climaveneta.de Climaveneta España - Top Clima ondres 67, Barcelona Spain Tel Fax topclima@topclima.com Climaveneta Chat Union Refrig. Equipment Co td 88 Bai Yun Rd, Pudong Xinghuo New dev. zone Shanghai China Tel Fax Climaveneta Polska Sp. z o.o. Ul. Sienkiewicza 13A, egionowo, Poland Tel Fax info@climaveneta.pl Climaveneta Climate Technologies (P) td #3487, 14th Main, HA 2nd stage, Indiranagar, Bangalore India Tel: , Fax: sales@climaveneta.in Climaveneta UK TD. Highlands Road, Shirley Solihull West Midlands B90 4N Tel: +44 (0) Fax: +44 (0) Freephone: response@climaveneta.co.uk