Ball Screw Support Units. Outline. Compact Support Units. Variation
|
|
- Louise Dennis
- 5 years ago
- Views:
Transcription
1 all Screw s Outline Variation Compact smsu seriesprovide 2 choices of ousin type, which are illow type and Flane type. Fixed side and supported side Units are standardized for each type. In case of illow type, it became liht-weiht & more compact compared to our conventional type. Our conventional models, which are lock type s, are still available. illow type Flane type KSS provides the customer with suitable s for end journal of Miniature all Screws. Especially, MSU series, which is called Compact type, has feature of liht weiht & compact compared to existin series. All of our s fit the standard end journal profile of KSS all Screws. lease try and use them as well as all Screws. Series classification Each series can provide both of fixed-side and supported-side s. MSU seriescompact type illow type Specifications Anular Contact earins built in Compact smsu seriesare made from stainless steel and low contamination Grease is applied. Other components of s are also made form stainless steel or are coated by black finishin. These series can be used in clean-environment. KSS s Flane type [all earins for MSU Sries] Anular Contact all earins SU & EK, EF series [MSU Series] lock type This series is the Anular Contact all earins built in fixed side of Compact Support UnitsMSU series. This can be provided as a set of DF or D confiuration only. Refer to dimension table in pae E115-E116 iht weiht(more than 5% down) Comparison to our current model Compact s Current type Deep Groove earins This series is the Deep Groove all earins built in supported side of Compact Support UnitsMSU series. This type can be provided as a earin itself. Refer to dimension table in pae E117-E118 Compact s [EK, EF Series] This type of has features of liht-weiht & compact profile compared to our conventional s. KSS believes this type is suitable for Miniature all Screws. Fixed end Supported end Features y eliminatin extra shape of ousin, and minimizin pitch of mountin holes, liht-weiht & compact desin s became reality. re-load controlled Anular Contact earins are installed, so Riidity can be kept hih. Reasonable price has been achieved with reducin number of components, because oil seals have been eliminated by usin shielded type Anular Contact earins. Anular Contact earins are made from stainless steel and low contamination Grease is applied, so s can be used in clean-environment. Ultra-compact size3is standardized, it would be suitable for Ultra Miniature all Screws. illow & Flane type are standardized for both fixed & supported side, so wide variety of choices are available. EK type EF type SU type Features Multi-use Anular Contact all earins with pre-loadare built in Fixed side s, and Deep Groove earin is attached in supported side Unit with stop rin. Fixed-side has seals at both end or one end, so special dust protection is not necessary under normal circumstance. E11 E12
2 Standardized end-journal profile KSS s are desined to fit standard end-journal profile of KSS Miniature all Screws. Table below shows KSS s list correspondin to standard end-journal profile. Supported side Fixed side M3x.5 R.1max h6.6 model h R.2max M4x.5 3h6.6 model 5.2 R.15 max R.15 max h MSU-3C / MSU-3G M5x.5 4h h MSU-4C / MSU-4G, EK4 M6x h6.8 2 model MSU-3CS / MSU-3GS 3 model MSU-4CS / MSU-4GS, SU3-S R.2max R.2max model model R.2max model MSU-5CS / MSU-5GS, SU4-S R.2max model MSU-6CS / MSU-6GS, EF6 MSU-8CS / MSU-8GS, EF h R.2max MSU-5C / MSU-5G, EK5 9 M8x h6.8 model h R.2max MSU-6C / MSU-6G, EK6 M11. 8h6.9 model MSU-8C / MSU-8G, EK8 1 EK h M121. 1h6.9 R.2max R.2max R.2max model model model 8 EF1 1 EF12 12 EK12 E13 E14
3 Mountin procedure 1.Assemblin 1Mount the fixed end onto the all Screw. Note 1Do not disassemble the. 2Tihten the ock-nut after insertin into the fixed end, and secure usin the set piece and hexaonal socket head set screw. Note 1Make sure that the set piece is not allowed to curl. 3Mount the supported end earin, secure with the stop rin, and fit into the ousin. 3. Mountin the supported end ousin on the base and checkin accuracy 1Move the table toward the supported end ousin and center it. Move the table in both directions and adjust to ensure smooth movement over entire lenth. Secure loosely to the base. 2Check the Run-out and Axial ap at the all Screw Shaft end usin a dial aue, and fully tihten the Nut, fixed end and supported end ousin. Measure Axial ap Measure Run-out Stop rin earin exaonal socket head set screw Set piece Collar ock-nut Supported end Fixed end 2. Mountin the table on the all Screw Nut and mountin the on the base 1Insert the all Screw Nut into the table or racket, which is attached to the table, and loosely tihten. 2oosely secure the fixed end to the base. Note 1Move the table toward the and center it. Adjust to ensure that the table moves smoothly. 4.Connectin to the Motor 1Secure the Motor to the main Unit. 2Connect the Motor to the all Screw usin the couplin. 3Run in thorouhly. Couplin Motor Move in both directions and adjust to ensure smooth movement over entire stroke. Table racket Supported end support unit Fixed end support unit ase NoteInstruction above is for illow type and lock type s, In case of Flane type s, the same procedure can be applicable. E15 E16
4 s MSU Series illow typefixed side Model number notation MSU - 5 C S d1 Series No. MSU : KSS Compact Series Nominal number ousin type C : illow type G : Flane type End-journal type None : fixed side S : supported side M T R 2 3 NoteIn some cases, nominal number is not the same as earin Inner diameter. arts ist art No. art name Qty d 1 ousinlack Chrome coatin 1 2 earinswith Shields 1 set 1 3 ressure Nut 1 4 Collar ock Nut 1 6 exaonal socket head set screw with set piece 1 set Unitmm r. Inner dia. d R d1 M T ock Nut.5.3 Tihtenin torque of ock Nut Ncm earin MSU-3C M3 8 M3.5 8 MTA3-85DF 16.5 MSU-3C MSU-4C M3 1 M4.5 1 MTA4-115DF 27 MSU-4C MSU-5C M3 11 M MTA5-135DF 35 MSU-5C MSU-6C M3 12 M MTA6-155DF 5 MSU-6C MSU-8C M3 14 M81. 2 MTA8-195DF 96 MSU-8C Note 1Anular Contact all earins manufactured by ISCare desined for clean room use, they are made of Stainless steel with low contamination rease NSK G2packed. Note 2ressure Nut, Collar and ock Nut are coated with lack finishin. Note 3Do not disassemble, as they are pre-loaded and pre-adjusted. E17 E18
5 s MSU Series illow typesupported side Model number notation MSU - 5 C S d1 Series No. MSU : KSS Compact Series Nominal number ousin type C : illow type G : Flane type End-journal type None : fixed side S : supported side 1 NoteIn some cases, nominal number is not the same as earin Inner diameter. R 1 d arts ist art No. art name Qty 1 ousinlack Chrome coatin 1 2 earin with Shields 1 3 Stop rin 1 Unitmm r. Inner dia. d R d1 earin Stop rin.5.3 MSU-3CS ZZ ETW-1.5OCIAI 8.5 MSU-3CS MSU-4CS ZZ G-3IWATA 16 MSU-4CS MSU-5CS ZZ G-4IWATA 21 MSU-5CS MSU-6CS ZZ1 STW-6OCIAI 32 MSU-6CS MSU-8CS ZZ1 STW-6OCIAI 6 MSU-8CS Note 1 Deep Groove all earin manufactured by ISCis desined for clean room use, it is made of Stainless steel with low contamination rease NSK G2packed. Note 2Stop rin may be the equivalent one described in the table above. E19 E11
6 s MSU Series Flane typefixed side Model number notation MSU - 5 G S Df M 2-d1 2 d 3 D6 Series No. MSU : KSS Compact Series Nominal number ousin type C : illow type G : Flane type End-journal type None : fixed side S : supported side NoteIn some cases, nominal number is not the same as earin Inner diameter. T arts ist art No. art name Qty F 4 1 ousin lack Chrome coatin earins with Shields 1 set 3 ressure Nut 1 4 Collar 1 5 ock Nut 1 6 exaonal socket head set screw with set piece 1 set Unitmm r. Inner dia. d F 4 Df D d1 M T ock Nut.5 Tihtenin torque of ock Nut Ncm earin MSU-3G M3 8 M3.5 8 MTA3-85DF 12.5 MSU-3G MSU-4G M3 1 M4.5 1 MTA4-115DF 2 MSU-4G MSU-5G M3 11 M MTA5-135DF 3 MSU-5G MSU-6G M3 12 M MTA6-155DF 42 MSU-6G MSU-8G M3 14 M81. 2 MTA8-195DF 7 MSU-8G Note 1 Anular Contact all earins manufactured by ISCare desined for clean room use, they are made of Stainless steel with low contamination rease NSK G2packed. Note 2ressure Nut, Collar and ock Nut are coated with lack finishin. Note 3Do not disassemble, as they are pre-loaded and pre-adjusted. E111 E112
7 s MSU Series Flane typesupported side Model number notation MSU - 5 G S 2-d1 Df d D6 Series No. MSU : KSS Compact Series Nominal number ousin type C : illow type G : Flane type End-journal type None : fixed side S : supported side NoteIn some cases, nominal number is not the same as earin Inner diameter. F 1 arts ist art No. art name Qty 1 ousinlack Chrome coatin 1 2 earinwith Shields 1 3 Stop rin 1 Unitmm r. Inner dia. d F 1 Df D d1 earin Stop rin.5 MSU-3GS ZZ ETW-1.5OCIAI 7.5 MSU-3GS MSU-4GS ZZ G-3IWATA 12 MSU-4GS MSU-5GS ZZ G-4IWATA 16 MSU-5GS MSU-6GS ZZ1 STW-6OCIAI 24 MSU-6GS MSU-8GS ZZ1 STW-6OCIAI 4 MSU-8GS Note 1Deep Groove all earin manufactured by ISCis desined for clean room use, it is made of Stainless steel with low contamination rease NSK G2packed. Note 2Stop rin may be the equivalent one described in the table above. E113 E114
8 s Fixed side all earins for MSU series Anular Contact all earinsstainless type Contact Anle 45.5 D r1 R2 r2 d.5 Db Rb rb db Df Rf rf df R1 D type Inner rin pre-load type **Silver colored shields are outside DF type Outer rin pre-load type **ronze colored shields are outside D Confiuration DF Confiuration Model number notation Recommended tihtenin torque MTA DF Series No. Inner diameter of earin mm Outer diameter of earin mm Material : Stainless Steel T : earin Steel Accuracy rade Equivalent to 5 Duplex type DF : Face to Face duplex D : ack to ack duplex UnitNcm kf cm DF type D type MTA2-65DF/D MTA3-85DF/D MTA4-115DF/D MTA5-135DF/D MTA6-155DF/D MTA8-195DF/D Unitmm I.D. d O.D. D OuterRin Width Dimension Abutment & Fillet asic oad Ratin Chamfer min. DF type D type imit Speed r1 r2 R1 R2 Ca N Coa N min 1 Df df min. Rf rf Db db min. Rb rb MTA2-65DF/D , MTA2-65DF/D MTA3-85DF/D , MTA3-85DF/D MTA4-115DF/D , MTA4-115DF/D MTA5-135DF/D , MTA5-135DF/D MTA6-155DF/D , MTA6-155DF/D MTA8-195DF/D , MTA8-195DF/D Note 1 Anular Contact all earins manufactured by ISCare desined for clean room use, they are made of Stainless steel with low contamination rease NSK G2packed. If necessary, earin steel type Anular Contact all earins with anti-frettin rease can be also provided. Note 2earin duplex can be distinuished by the color of shield plate for each duplex, please refer to fiure above. Note 3lease desinate duplex number DF or D, when you place order. Note 4This series can be provided as sets of DF or D confiuration only. E115 E116
9 s Supported side all earins for MSU series Deep Groove earinsstainless type R1 Rb D.8 r1 d.5 Db rb db Unitmm I.D. d O.D. D Width Dimension r1 Chamfer min. R1 asic oad Ratin Cr Cor N N imit Speed min 1 Db db min. Abutment & Fillet Rb rb 62ZZ , ZZ 623ZZ , ZZ 624ZZ , ZZ 6-113ZZ , ZZ1 66ZZ , ZZ1 Note 1 Deep Groove all earins manufactured by ISCare desined for clean room use, they are made of Stainless steel with low contamination rease NSK G2packed. E117 E118
10 s EK series lock typefixed side 2 3 2d1 d2 Depth h facin M d1 d d 1 T 1 T Mountin hole for EK4EK5 1 EK4EK8 type EK1EK12 type 1 EK4EK8arts ist art No. art name Qty 1 ousin 1 2 earin 1 set 3 ressure Nut 1 4 Collar 1 5 Seal 1 6 ock-nut 1 7 exaonal socket head set screw with set piece 1 Model number notation EK 8 Series No. Inner diameter of earinmm EK1EK12arts ist art No. art name Qty 1 ousin 1 2 earin 1 set 3 ressure cover 1 4 Collar 1 5 Seal 2 6 ock-nut 1 7 exaonal socket head set screw with set piece 1 Unitmm d d1 d2 h M T earin EK M2.6 1 AC EK 4 EK M AC EK 5 EK M3 12 AC EK 6 EK M3 14 AC EK 8 EK M3 16 7DFGM5 46 EK 1 EK M DFGM5 44 EK 12 NoteDo not disassamble, as they are pre-loaded and pre-adjusted. E119 E12
11 s SU and EF series lock typesupported side 2d1 d2 Depth h facin d d EF6EF8 type SU and EF1EF12 type arts ist art No. art name Qty 1 ousin 1 2 earin 1 3 Stop rin 1 Model number notation SU 3- S EF 8 Series No. Nominal number Supported side No. NoteIn EF Series nominal No. may not be the same as earin Inner diameter. Unitmm d d1 d2 h earin Stop rin SU3-S ZZ G-3 35 SU3-S SU4-S ZZ G-4 4 SU4-S EF ZZ C6 7 EF 6 EF ZZ C6 13 EF 8 EF ZZ C8 33 EF 1 EF ZZ C1 32 EF 12 E121 E122
WBK 08 S - 01 A WBK 25 DF - 31H. Accessories. (For light load) (For high speed and heavy load) 3. Reference number coding
3. Reference number coding (For light load) xample: Product code for support unit ominal size code * WK 8 S - 1 ounting code o code: Fixed support unit S: Simple support unit SF: Simple support unit (for
More informationSupport Unit. Support Unit. Structure and Features. Models EK, BK, FK, EF, BF and FF. Ball Screw Peripherals 508-2E 508-2E
Models K, BK, FK, F, BF and FF Uses the Optimal Bearing To ensure the rigidity alance with the Ball Screw, the uses an angular earing (contact angle: 30 ; DF con guration) with a high rigidity and a low
More informationPrecision Rolled Ball Screws Main features:
Ball Screws Precision Rolled Ball Screws Main features: Compact ball nut heralding in the next generation standard. Extended maintenance free operation with NSK K1 lubrication unit and new grease retaining
More informationNSK Standard Ball Screws High Speed SS Series
NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard
More informationLinear Bushings. Description of each series and Table of dimensions
Linear Bushins escription of each series and Table of dimensions Linear Bushin G Pae - to -9 Linear Bushin Pae - to -7 ompact Linear Bushin Pae -7 to -77 Miniature Linear Bushin Pae -7 to - In the table
More informationBall Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
More informationDeep groove ball bearings L12DDU. Polyolefin is used for packaging food in supermarkets, replacing dioxin-generating vinyl chloride.
Bearings Environmentally friendly Bearings offer high performance in water- and dust-contaminated environments. Enhanced strength makes these ever-evolving bearings ideal for high-speed. Bearings 22311L12CAM
More informationShort Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
More informationSupport Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More informationAPEX DYNAMICS, INC. 1-Stage 2-Stage 3-Stage 4-Stage 5-Stage Motor Designation APEX DYNAMICS, INC.
APEX DYAMIS, I. AM Series haracteristic Hihlihts Stainless steel housin with alloy aluminum desin on front cover and motor adapter. Suitable for medical, electronics, food industry, packain industry and
More informationThrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
More informationSupport Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More informationNSK Ball Screws for High-Load Drive
NSKTAC Series of all Screw Support earings for High-Load Applications NSK Roller Guide RA Series We have developed easy-to-use ball screws for high-load applications and now offer a wide variety of products
More informationNSK STANDARD BALL SCREWS COMPACT FA SERIES
NSK STNDRD BLL SCREWS COMPCT F SERIES Quiet, high-speed operating performance. Courtesy of Steven Engineering, Inc. - (8) 258-92 - sales@steveneng.com - www.stevenengineering.com Table of Contents Selection
More informationRK Series. Introduction. Design Features. Availability. Applications
Introduction bearings have a flanged cross-sectione or both rings and range in size from 20 47 inches OD (500 1200 mm). The flanged design reduces weight and provides the equipment designer greater flexibility
More informationClassification and Characteristics of Rolling Bearings
1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates
More informationCompact FA Series. NSK Standard Ball Screws
NSK Standard Ball s ompact Series ompact-nut ball screws with increased speed and low noise for NSK standard. They accommodate a variety of uses, from use in semiconductor equipment to various transfer
More informationClean One-touch Fittings
Clean One-touch Fittins Series KP/KP/KPG K KK D S T Series KP Series KP Series KPG 2 One-touch fittins and for blowin systems and drive air One-touch fittins (for blowin) Series KP Collet Polypropylene
More informationPrecision Miniature Ball Screw
Brief introduction of Precision Miniature Ball Screw Precision Miniature ball screw assemblies are conventionally understood to be systems with a nominal diameter of 16mm or less. Their miniaturized nut
More informationPortuguês English Español Motores Elétricos
FINAL OPERATION AND MAINTENANCE MANUAL MINA MINISTRO HALES PROJECT ORDEN DE COMPRA H336073-PM031/A 4501190525 FMC TECHNOLOGIES PROJECT B6042 FMC Technoloies Chile Ltda. Callao #2970 Oficina 704 Edificio
More informationSECTION 1. Basic Information
SECTION 1 SECTION 1 This section covers both the basic technical information governing bearing selection and the part numbering system used in this catalog. When the part numbering is different from the
More informationRoaDyn S635. Force. Wheel force transducer for heavy cars and high performance vehicles. Type 9267A1
Force RoaDyn S635 Wheel force transducer for heavy cars and hih performance vehicles For measurin three forces and three moments on a rotatin wheel; a major constituent in modern vehicle development. Modular
More informationNELDISC Metal seated high performance triple eccentric disc valve Series L6, L4 Installation, Maintenance and Operating Instructions
NELDISC Metal seated hih performance triple eccentric disc valve Series L6, L4 Installation, Maintenance and Operatin Instructions 2 L6 70 en 10/2017 2 2 L6 70 en Table of Contents 1 GENERAL...3 1.1 Scope
More informationModula Plus. Technical documentation Ver 1.01
Modula Plus Technical documentation Ver 1.01 Table of contents Introduction Overview 2 General characteristics Main characteristics 4 Functional sements of a column 6 Main components of a functional 8
More informationWrenches. Combination Wrench
Combination Wrench Open End Wrench Offset Rin Wrench Star Box End Wrench Flare Nut Wrench Flexible Crow Foot & Rin Socket Wrench Swivel Head Socket Wrench Sluin Wrench Heavy Duty Wrench Speed Wrench Anled
More informationNSK Linear Guides. Roller Guide RA Series. Extended series
NSK Linear Guides A roller guide series employing advanced analysis technology offers super-high load capacity and rigidity. The RA series includes a complete lineup to handle a wide range of applications.
More informationTOUGH AND LONG LIFE (TL) SERIES SPHERICAL ROLLER BEARINGS
TOUGH AND LONG LIFE (TL) SERIES SPHERICAL ROLLER BEARINGS TOUGH PERFORMANCE IN HIGH TEMPERATURES. High temperature processing and manufacturing environments, such as those in the dryer section of paper
More informationKaydon white paper. The importance of properly mounting thin section bearings. an SKF Group brand. by Rob Roos, Senior Product Engineer
The importance of properly mounting thin section by Rob Roos, Senior Product Engineer an SKF Group brand Figure 1 Radial Load Reversing Thrust Overturning Moment Thin section ball have a much thinner cross-section
More informationTable of Contents. Ball bearings
Table of Contents Single Row Deep Groove Ball s Nomenclature... Page B-1 Interchange... Page B-2 Applications... Page B-2 Features... Page B-3 Internal Clearance... Page B-4 Snap Ring and Groove Dimensions...
More information*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings
Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.
More informationNSK Ball Screw, Standard Inventory
Maintenance-free Series NSK Ball Screw, Standard Inventory W Series Environment-friendly maintenance-free ball screws. Low-cost and standard inventory for quick delivery. Compatible with stringent environmental
More informationHSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options
More informationBallscrews. Rotating Nut ballscrews. Ballscrew X-Y retrofits for mills. Precision ground accuracy to mm/300mm. High load drive 50 to 350T
Ballscrews An ideal drive mechanism where constant motion or high frequency cycling is required. Ballscrews provide highly efficient transmission with low starting torque, smooth running and quiet operation.
More informationTIMKEN DEEP GROOVE BALL BEARINGS
TIMKEN DEEP GROOVE BALL BEARINGS DEEP GROOVE BALL BEARING CATALOG INDEX DEEP GROOVE BALL BEARINGS Deep Groove Ball Bearing Range...1 Bearing Size Range...1 Standard 6000 Series...2 Thin-Section 61000 Series...6
More informationTorque Control & Multipliers
200 180 160 140 120 100 80 60 190 170 150 130 110 90 70 50 Torque Control & Multipliers Torque Wrench Interchaneable Torque Wrench Electronic Torque Wrench Electronic Torque Adapter Torque Screwdriver
More informationJPF, BTK-V, MTF, WHF, BLK/WTF, CNF
Rolled Models JPF, BTK-V, MTF, WF, BLK/WTF, CNF and BNT Point of Selection Options Model No. Precautions on Use Accessories for Lubrication Mounting Procedure and Maintenance A A B Lead Angle Accuracy
More informationRHN Series Electric Wire Rope Hoists
RHN Series Electric Wire Rope Hoists easy Maintenance control panel IP protection with modern controls. Components mounted on DIN rail. Equipped with main line contactor. adjustable Geared Limit switch
More informationSBT SPHERICAL SELF-LUBRICATING WIDE Materials
PHERICAL BEARING ELF-LUBRICATING BT PHERICAL ELF-LUBRICATING WIDE RACE BALL LINER 41 tainless teel / Heat Treated 44C tainless teel / Heat Treated Teflon / Fabric MINEBEA No Rotational H α φo tatic Limit
More informationLinear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)
Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.
More informationMounting Overlap Shield. Face Clamps. Gap. Seat Depth. Lead In Chamfer. Loose Fit.
Mounting Introduction: Reali-Slim thin section ball bearings have a crosssection thickness that is much thinner than standard bearings of the same diameter, and are therefore more sensitive to shaft and
More informationDescription of Each Series & Table of Dimensions
The eedle Roller Bearin Series has been produced at a quality level in conformance with ISO- and ISO- usin a production system that reduces neative impact on the lobal environment. This catalo adopts the
More informationKR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
More informationBall. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR
Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator
More informationLinear Bushing LBE LBD LBB LM LME LMB
Linear Busin LBLBLBBLMLMLMB Linear Busin is a i precision linear motion rollin uide wic travels alon a saft to acieve endless linear motion. In te external cylinder, a retainer, steel balls, etc. are compactly
More informationThe Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.
Circular arc groove Two pint contact structure of circular arc groove. It keeps the function of self-aligning and smooth rolling performance. 45 angle of contact Four rows of circular arc groove contact
More informationSafe Tool holding system by Beta. Height-Safe
afe Tool holdin system by Beta Heiht-afe 2 H-FE CTOGUE H-FE Tool holdin system by Beta For jobs to be carried out hih from the round or in the presence of mechanical movin parts, safety is a key factor
More informationProduct catalog. Stepper motors Linear actuators Stepper motor drivers.
Product catalo Stepper motors Linear actuators Stepper motor drivers www.nanotec.com 1 Overview of contents bout us 5 Facts, fiures and essential information 6 2-phase stepper motors SP0618 - SP5575 14
More informationTROUBLESHOOTING SPECIAL TOOL ASSEMBLY AND ADJUSTMENT
1 INDEX Models FD, FE, FF and SG REAR AXLE 10-1 10-108E-07 CHAPTER 10 REAR AXLE Models FD, FE, FF and SG TROUBLESHOOTING...10-2 10 SPECIAL TOOL...10-3 WHEEL HUB AND RELATED PARTS DISASSEMBLY...10-7 INSPECTION...10-9
More informationOne-way Clutches Tension Pulleys, Bottom Roller Bearings
One-way Clutches Tension Pulleys, Bottom Roller Bearings One-way clutches One-way Clutches This is a compact and roller type one-way clutch which formed a cam face on its outer ring. (Available shaft diameter
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationC-Lube Linear Way MV
-Lube Linear Way 49 50 -Lube Maintenance Free Series -Lube Linear Way Long term maintenance free compliant! The aquamarine end plate is the symbol of maintenance free. Designation of Identification Number
More informationNTN Ball Screw Support Bearings
Ball Screw Support Bearings 1. Ball Screw Support Bearings CONTENTS 1. Ball Screw Support Bearings q Angular contact thrust ball bearing A-BST w Duplex angular contact ball bearing HT 1 e Needle roller
More informationPivot Seal Pressure Switches for Fluid Power Applications
for Fluid Power Applications SOR s Pivot Seal pressure switches are rued, field-mounted instruments that incorporate a flexible modular desin providin cost effective sensin solutions. The pressure sensin
More informationS Couplers. Series KK. Series KKH. Series KK/KKH. RoHS KQ2 KQB2
Series KK/KK he pullin strenth for the plus and sockets has been improved. wice as stron as the conventional models. Series KK With sleeve lock (Except for ) Effective area 3. to 2 mm 2 Series Series KK
More informationPrecision Linear Pack
Precision Linear Pack General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features... Features of the Precision Linear Pack... Structure and features... Rated Load
More informationDrive Systems Geared Motors, Motors and Electronic Drives.
Geared Motors, Motors and Electronic Drives. Hih efficiency (IE2, IE3) Hih dynamic Compact desin Low noise Low backlash www.we.net A suitable drive solution for each application Requirements Modular Drive
More informationMTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
More information506E. LM Guide Actuator General Catalog
LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationOur Warranty, Your Satisfaction.
Our Warranty, Your Satisfaction. Since 200, GRB Bearings, a 00% Canadian family owned company, has been a successful bearing supplier to distributors and OEMs across Canada. Our bearings are mainly imported
More informationSYK,SONYUNG INDUSTRY CO.,LTD. No.16, Lane 117,Sec. 1,Chang-Nan Rd., Chang-Hua City, Chang-Hua Hsien, Taiwan TEL: FAX:
SYK,SONYUNG INDUSTRY CO.,LTD. 16, Lane 117,Sec. 1,Chang-Nan Rd., Chang-Hua City, Chang-Hua Hsien, Taiwan TEL:886-4-7321236-8 FAX:886-4-7376030 Support Unit BK (fixed-side rectangular type) name 2 Bearing
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More informationStainless Steel Mounted Bearings
tainless teel s More Models Now vailable with Eccentric ocking ollar roduct eatures ynthetic lip with stainless steel flinger provides superior protection for high pressure washdown conditions re-filled
More informationrev 1_ XML02
1 DECK, MOTOR, BLADE 2 1 DECK, MOTOR, BLADE 1 1 273675-0 GRIP A 1 1 2 266459-3 TAPPING SCREW 5X25 2 1 3 453250-0 LOCK LEVER 1 1 4 453251-8 LOCK LEVER SUPPORT 1 1 5 233173-6 COMPRESSION SPRING 4 1 1 6 144077-6
More informationAmbient temperature compensation (-40F to +1400F) Phase loss sensitivity protection, Current unbalance sensitivity.
www.we.net Thermal Overload Relays - RW Series Rated for the new industry RW overload relays are an important part of WEG rane of products. s usual in WEG products, an extended operational service life
More informationKNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP
-Taster V- COE 219-001 Find your exact zero points in all three axes in seconds with the new distance measurin scale (raduated and analoue). 20 h 7 =12 With Standard Stylus %OFN VFOH IRU UGO GHÀHFWRQ HG
More informationWG20 Geared Motors. Motors Automation Energy Transmission & Distribution Coatings
WG20 Geared Motors Motors Automation Enery Transmission & Distribution Coatins www.we.net WEG Group - Transformin enery into solutions. WEG is a leadin lobal manufacturer and solutions provider of drive
More informationBearings. Rolling-contact Bearings
Bearings A bearing is a mechanical element that limits relative motion to only the desired motion and at the same time it reduces the frictional resistance to the desired motion. Depending on the design
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationHigh precision ball bearings
GMN Paul Müller Industrie GmbH & Co. KG Äussere Bayreuther Str. 230 D-90411 Nuremberg Phone: +49 911-5691-0 Fax: +49 911-5691-221 www.gmn.de High precision ball bearings Ball bearings: Phone: +49 911-56
More informationLinear Way F. Linear Way F series. Linear Way F LWFF LWFH. Interchangeable. Wide structure. Flange type and block type.
ide Rail Type Linear ay Linear ay LHLLS U.S. PATTD Linear ay is a linear motion rolling guide, featuring a wide track rail along which a highly rigid slide unit performs endless linear motion. A large
More informationSolutions for Pulp and Paper
Motors Automation Enery Transmission & Distribution Coatins Solutions for Pulp and Paper www.we.net Solutions for Pulp and Paper WEG can offer complete solutions for the whole process in pulp and paper
More information2-1 HG Series - Heavy Load Ball Type Linear Guideway
2 G99TE15-114 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove
More informationFRONT SUSPENSION GENERAL. FS - 2 SPECIFICATIONS. FS - 2 SERVICE STANDARDS. FS - 2 SPECIAL TOOLS. FS - 3 SERVICE PROCEDURE. FS - 4 TROUBLESHOOTING
FRONT SUSPENSION GENERA... FS - 2 SPECIFICATIONS... FS - 2 SERVICE STANDARDS... FS - 2 SPECIA TOOS... FS - 3 SERVICE PROCEDURE... FS - 4 TROUBESHOOTING... FS-10 FS-2 FRONT SUSPENSION GENERA The suspension
More informationVARIATIONS IN EQUIPMENT HOW TO SELECT EXAMPLE FOR ORDERING TYPE
VARIATIONS IN EQUIPMENT Material Stainless and acidproof steel Aluminium alloys Various combinations of material Seals for elevated temperatures Surface finish Lacquered Chemi-nickel coating On customer's
More informationPrecision lock nut Hydraulic nut Wedge block WBK bearing seat
Precision lock nut Hydraulic nut Wedge block WBK bearing seat Locking device The locking device applied by the precision bearing to axially position on the shaft would be manufactured with high precision.
More informationSSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories
More informationFive ways! Service Guarantee 2 HAND TOOLS. Company history. Dear Customers,
Company history 1890: Company founded by Andreas Maier as a lock manufacturer. 1920: Production proram extended to include spanners 1928: Production-line assembly of Fellbach locks. 1951: With the introduction
More informationLinear Guideways HG Series
18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationREAR AXLE Click on the applicable bookmark to selected the required model year
REAR AXLE 27-1 REAR AXLE CONTENTS GENERAL INFORMATION.................. 2 SERVICE SPECIFICATIONS................. 3 LUBRICANTS.............................. 3 SEALANTS AND ADHESIVES.............. 4 SPECIAL
More informationPUMP BEARING TRAINING
PUMP BEARING TRAINING PRESENTED BY AARON DODD NSK AMERICAS JUNE 24, 2015 Unless otherwise specifically noted, the competitive information contained in this presentation is gathered from legally permissible
More informationBALL BEARINGS. Single Row - Radial Metric Single Row - Maximum Capacity Single Row - Radial
Single Row - Radial...1.16 Metric... 1.16 Single Row - Maximum Capacity...1.19 Single Row - Radial...1.20 Inch... 1.20 Inch and Inch Bore Metric... 1.21 Single Row - Spherical OD...1.22 Metric... 1.22
More informationÉlectronics. "Micro-TechJ" screwdrivers
"Micro-TechJ" screwdrivers "Micro-TechJ" screwdrivers Électronics Efficient The screwdriver end is desined to provide an effective pressure area in each of the three micro-enineerin screwdriver positions.
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
More informationMotor starters up to 150 A
Contents Motor starters up to 50 A TeSys GV, GV3 and GV7 motor circuit-breakers b Thermal-manetic circuit-breakers Selection uide.............................................. pae 30 v Presentation.............................................
More informationHOSE - OIL/CHEMICAL & GENERAL PURPOSE
HOSE - OIL/CHEMICAL & ENERAL PURPOSE A430 - Oil Suction and Delivery Hose 10 bar Rubber: Lining: Reinforcement: Cover: Temperature range: - DB15 Designed for suction and discharge use on various petroleum
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationSECTION V-1...BENDIX, HYDROBOOST HYDROMAX MINI M/C
SECTION V-1...BENDIX, HYDROBOOST HYDROMAX MINI M/C BENDIX HYDROBOOST / HYDROBOOST II - Product Specifications Part Number Inlet Outlet 4 Accumulator Input Piston Dia. 5 Pedal Mounting Rod MC Studs Basic
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationSRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball M Guide Miniature Type Model M rail Endplate End seal M block Compact type Model -M Ball Side seal Ball cage Wide type Model -WM * or the ball cage, see A. Point of Selection A Point of Design
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationW o r l d C l a s s Q u a l i t y i n B a l l B e a r i n g M a n u f a c t u r i n g
W o r l d C l a s s Q u a l i t y i n B a l l B e a r i n g M a n u f a c t u r i n g www.pfibearings.com Bearing Buyer s Guide Table of Contents Company Profile.. i World Class Quality ii Dimensional
More informationGerman Test Point Manufacturer. General Info Technical Info Sealing Types. Materials, media, standards. Test point + union 24 DIN female cone
100 0 80 20 500 40 1000 1400 60 Test Points Fittins Hose Hose for Hydraulics General Info Technical Info Sealin Types Company, terms, ISO 9001:2008 4 4 7 Materials, media, standards Stud ends, ports, sealin
More informationT!"#!$ %#&'#& ( T )*"+),&$ -.)/0 "12
www.karasus.com The elastic metal bellowed parts absorbing the heat induced expansion or changes in ambient temperatures are called expansion joints. If no measures are taken against changes in size of
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationKICK STARTER/DRIVE PULLEY/ CLUTCH/DRIVEN PULLEY SERVICE INFORMATION TROUBLESHOOTING KICK STARTER DRIVE BELT...
8 KICK STARTER/DRIVE PULLEY/ 8 SERVICE INFORMATION... 8-2 TROUBLESHOOTING... 8-2 KICK STARTER... 8-3 DRIVE BELT... 8-7 DRIVE PULLEY... 8-9 STARTER ONE-WAY CLUTCH DRIVE GEAR... 8-11... 8-14 8-0 Torque:
More informationCh# 11. Rolling Contact Bearings 28/06/1438. Rolling Contact Bearings. Bearing specialist consider matters such as
Ch# 11 Rolling Contact Bearings The terms rolling-contact bearings, antifriction bearings, and rolling bearings are all used to describe the class of bearing in which the main load is transferred through
More informationCompact Rotary Actuator
Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170
More information