Five ways! Service Guarantee 2 HAND TOOLS. Company history. Dear Customers,

Transcription

1 Company history 1890: Company founded by Andreas Maier as a lock manufacturer. 1920: Production proram extended to include spanners 1928: Production-line assembly of Fellbach locks. 1951: With the introduction of clampin elements, AMF diversified into the fields of workpiece and tool clampin. 1965: Tole clamps extend the AMF product rane. AMF cataloues are now published in ten lanuaes. 1975: Hydraulic clampin marks further specialisation. 1982: Clampin and fixture systems round off AMF competence in clampin. 1996: Introduction of the AMF Team Oranisation in all business sectors. Quality assurance certified to ISO Hans-Guenther Maier Manain Director ANDREAS MAIER GmbH & Co. Dear Customers, Since 1890, the name AMF has stood for reliability and the hihest quality. Today our product rane comprises more than articles in the sectors clampin, hand tools, and locks. That makes us a leadin European manufacturer. Outstandin products are only one side of the coin. For us, it is just as important to provide our customers with perfect service, day in and day out. We laid the foundations for this in recent years with our modern Team Oranisation. The service from your partner at AMF will be quick, direct, and competent. Our exceptional service has a name: the AMF Service Guarantee. It offers you five sinificant advantaes see them for yourself on this pae. The 2 Service Guarantee We offer you confidence five ways in every aspect of our products. At AMF, the service is riht too. You can rely on us. Guaranteed! Five ways! Real technical advice Many tasks and a multitude of solutions. From AMF Professional Products you can find the riht way to solve your problem fast and reliably either at your local dealer or with the help of the specialists in our team. Just call us! Short delivery times From the AMF finished-product stores with over articles, we can supply 98 % of orders from stock. And you can be sure that every stock article ordered is despatched the same day. Certified quality AMF stands for painstakin production in our own works. We have followed this tradition since 1890 today, of course, with a modern quality assurance system to ISO Warranty We believe in the hih quality of our products. Complaints are dealt with quickly, unbureaucratically and enerously as far as possible, even well-beyond the uarantee period. Individual development You cannot find the product you need? Talk to us; we will find the riht solution for you from a special version, riht throuh to a completely new development.

2 Hexaon keys (metric) Hexaon keys (inch) Ball-ended hexaon keys (metric) TORX -Srewdrivers Bits Hook wrenches Pin wrenches Wrenches for machine tools Open-ended spanners Table of contents For contents of nos see pae Socket wrenches Customer specials

3 Individual to your specific requirements You need an advertisin or company imprint? No problem! All conventional or T-handle screwdrivers in this cataloue can be printed with your individual advertisin or company imprint in any desired colour, or in several colours, usin the very economical tampon printin process. Sample imprints: 15, 16, 19, 21, 24 and 28 If you need a quotation for larer quantities, please let us know how many you require and ive details of your imprint (sinle or multicoloured). 10, 11, 18, 27, , 11, 18, 27, 31 Special tools made to your specific requirements. We will manufacture special tools in an extraordinary variety of forms and sizes to the very hihest quality. Made-to-measure One of our specialities is the manufacturer of special hand tools to the individual needs of the customer. Technical perfection is our standard! The consequences of this quality: - lon workin life - precise application of force, and thus - the reatest possible safety for the user The latest production methods in our own works. If you need it, we can make it! More on paes 55-57! 4

4 On the subject of screwdrivers Quality from : There are very ood reasons why a discriminatin user should choose the best quality screwdrivin tools: riorous quality control ensures uniform standards; seen as a whole, more economical, because the unproductive time spent while tools are issued is reduced to the essential minimum; in sizes up to ca. 6 A/F, the torque that can be applied by hand may be hiher than the test torque that is specified in the relevant standard, with the result that: the wrench deforms, but only breaks under very unfavourable conditions, a modest, but valuable contribution is made to safety in the workplace; the true value of quality tools can only be seen in real, practical use. Material Hihly alloyed chrome-vanadium steel tested steel sections in verifiably uniform quality from trusted suppliers ensure low wear for a lon workin-life Manufacture End faces machined, up to 8 A/F, the edes to the end face are chamfered, from 9 A/F upwards, they are radiused, inspection by samplin at all staes of production. Execution Hardness to DIN standards the values of minimum torque specified for tihtenin screws up to rade 12.9 are achieved or exceeded. 5. Surface finish: blued (version C) nickel-plated (version D) 5

5 Hexaon key sets (metric) No. 906M Biketool 16-piece multi-purpose tool in pocket format. A professional tool specially for the cyclist, for rapid repair after any breakdown. Tools: hardened and blued. Case: two-component body Item M x 50 x Contents/Equipment: 7 Hexaon keys: and 8 mm A/F 2 Screwdrivers: + PH2 / -0.8 x 5 3 Socket spanners: mm 3 Open-ended spanners: mm 1 Spoke key: 14 G Specifications subject to chane without prior notice. The SCHRAUB-boy as an advertisement In your contacts with customers, there will frequently be occasions when a token of appreciation is helpful. The -SCHRAUB-boy is a sure way of achievin customer awareness. It is not only attractive, practical and handy, but also of outstandin quality. The body can be supplied in other RAL colours. All SCHRAUB-boys can be supplied, in quantities of 100 or more, printed with your company or advertisin imprint (in one or more colours) applied by the tampon printin process, just as you require. Give your business partners a SCHRAUB-boy from Real quality as an advertisin medium will brin you reconition and lon-term success. 6

6 Hexaon key sets (metric) The SCHRAUB-boy is a super-practical mini-workshop in pocket-knife format. There are four different versions see pae 31 for the TORX version. A really useful addition to professional and d-i-y toolkits. A sinle tool that fits in the palm of your hand and can perform up to 14 functions. Socket, TORX, or Philips screws are no problem, and, when refreshment is called for, there is even a bottle opener. The ideal advertisin medium! Examples of use: No. 910 SCHRAUB-boy Blades:CHROME-VANADIUM, hardened and nickel-plated. Body:plastic-coated steel. Machine tool Item No M6 95«28« M8 95«25« M9 95«28«25 No. 910M6-K Sales display carton. Bicycle assembly Item Contents Carton-size: No. (15 piec.) l«b«h M6-K 910 M6 132«100« Ausstattun: Item ISO 2936 DIN ISO 8764 similar to DIN 5264 DIN M6 2, 2.5, 3, 4, 5 mm size: 1 u. 2 0,5«3.5, 1«7 mm 7, 8, 10, 13 mm 910 M8 2, 2.5, 3, 4, 5, 6 mm size: 1 1«7 mm 7, 8, 10, 13 mm 910 M9 1.5, 2, 2.5, 3, 4, 5, 6 mm size: 1 1«7 mm 7, 8, 10, 13 mm Furniture installation Assemblin show stands In the car and of course Specifications subject to chane without prior notice. 7

7 Application of our L hexaon keys to ISO 2936 (DIN 911), DIN 6911 and ballended keys. The table shows the across-flats sizes of keys for thread sizes (M) and types of screw. ISO 2936C DIN 911C ( ) not ISO standard thread Hexaon keys (metric) CHROME-VANADIUM, hardened and blued, end face machined, edes of end face chamfered. SW Test torque Hardness Socket screw standards Hexaon Ball-ended ISO 4762 ISO ISO mm Nm Nm HRC [DIN 912] DIN 6912 DIN 7984 [DIN 7991] [DIN ] M1. M (M1. 8) M (M1.4) M M1.6 M2 M M2.5 M3 M3 M M3 M4 M4 M M4 M4 M5 M5 M M5 M5 M6 M6 M M6 M6 M8 M8 M M8 M8 M10 M12 (M14) 7 80 M M10 M10 M12 M12 M M12 M12 M14 M14 M16 (M18) M M14 M14 M16 M18 (M18) M20 (M22) M M16 M18 M16 M18 M20 M22 (M22 M24) M20 (M22) M20 M22 M M24 (M27) M24 M M30 M M33 M M36 M M M48 mm inch mm * * 033« « * 041« « /64 * 052« « « /32 * 074« « « /3 * 102« /16 * 108« « « /16 * 129« « « « /4 * 199« /8 * 222« « « « « « Hexaon keys (metric) Preisruppe 4 ISO 2936LC DIN 911LC Hexaon keys (metric), lon version CHROME-VANADIUM, hardened and blued, end face machined, edes of end face chamfered. mm inch mm / «15.5 * 102« « /32 * 129« « « « /32 5 /16 * * 197« « « « « The 1.3 A/F key is in fact 1.27 mm, which is precisely ( ) not ISO standard size. Keys marked * correspond to the metric size. Above 4 A/F they are marked with both sizes. Other lenths and versions on request. Specifications subject to chane without prior notice. 8

8 ISO 2936D DIN 911D Hexaon keys (metric) CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. mm inch mm * 041« « /64 * 052« « « /32 * 074« « « /32 * 102« /16 * 108« « « /16 * 129« « « « /4 * 199« /8 * 222« Hexaon keys (metric) The 1.3 A/F key is in fact 1.27 mm, which is precisely ( ) not ISO standard size. Keys marked * correspond to the metric size. Above 4 A/F they are marked with both sizes. Other lenths and versions on request. ISO 2936LD DIN 911LD Hexaon keys (metric), lon version CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. mm inch mm / «15.5 * 102« « /32 * 129«23 144« « « /32 * 197« /16 * 208« « « « « /4 * 379« ( ) not ISO standard size. Keys marked * correspond to the metric size. Above 4 A/F they are marked with both sizes. Other lenths and versions on request. Specifications subject to chane without prior notice. 9

9 Hexaon keys with handles (metric) No. 906S Hexaon keys (metric) with small rip Blade: CHROME-VANADIUM, hardened Grip: and blued. impact-resistant plastic, red. mm inch /64 * Keys marked * correspond to the metric size... fast for low tihtenin torques e.. for cuttin tool tips! No. 906QL Double hexaon keys (metric) with T-rip Blade: CHROM VANADIUM, hardened Grip: and nickel-plated. impact-resistant plastic, red. (Exception size 8, 10 and 12, rip black) Short arm for final tihtenin! mm inch /32* /16* Keys marked * correspond to the metric size. Advertisin or company imprint? These conventional or T-handle screwdrivers are specially suitable for printin with your individual advertisin or company imprint usin the economical tampon printin process. If you need larer quantities, ask for our quotation. Please state the quantity required and printin details (one or more colours). See pae 4 for further details. Lon arm for speed! Specifications subject to chane without prior notice. 10

10 Hexaon keys with handles (metric) No. 906Q Hexaon keys with T-rip (metric) Blade: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free), red. Hexaon keys with eronomic T-rip with: shape of rip optimised for comfortable use, permits sensitive tihtenin with full torque, hole for hanin up, for a tidy workplace. mm inch ,5 5/64 * ** /32 * ** ** /16 * Keys marked * correspond to the metric size. ** with stroner blade Please note: See pae 12 for our workshop stands. Advertisin or company imprint? These conventional or T-handle screwdrivers are specially suitable for printin with your individual advertisin or company imprint usin the economical tampon printin process. If you need larer quantities, ask for our quotation. Please state the quantity required and printin details (one or more colours). See pae 4 for further details. No. 906 Hexaon keys with screwdriver handle (metric) Blade: CHROME-VANADIUM, hardened and nickel-plated. Grip: impact-resistant plastic (cadmium-free), red. mm inch ,0 5/64 * ,0 26 Keys marked * correspond to the metric size. No. 906-TM6 Hexaon key sets (metric) 6-piece sets with screwdriver handles and T-rips in a Miniripba. Item Contents: A/F blade lenth TM6 Nr ,5 90 und 3 90 Nr. 906Q-4 150, Nr. 906Q-6 200, Specifications subject to chane without prior notice. 11

11 Hexaon key-sets (metric) No. 906-WM7 M Workshop stand with No. 906 screwdriver-handle keys, and No. 906Q T-rip keys (metric), 7-piece set. Blades: CHROME-VANADIUM, hardened and nickel-plated. Grips: impact-resistant plastic (cadmium-free), red. Stand: plastic-coated metal. Item Contents: A/F «blade lenth WM7 M No. 906 Q 2«90, 2.5 «90, 3 « No. 906Q 4 «150,5 «150,6 «200,8 « WM7 M-L Stand, empty, for No. 906-WM7 M 600 No. 906Q-WM7 Workshop stand with No. 906Q T-rip keys (metric), 7-piece set. Blades: CHROME-VANADIUM, hardened and nickel-plated. Grips: impact-resistant plastic (cadmium-free), red. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth Q-WM7 2 «100, 2.5 «100 3 «150, 4 «150, 5 «150, 6 «150, 8 « Q-WM7 L Stand, empty, for No. 906Q-WM7 195 T-rip keys in workshop stand are also available with our patented retainin rin, Item 906QF-WM7, pae 23. No. 906-WM9 Workshop stand with No. 906 screwdriver-handle keys, and No. 906Q T-rip keys (metric), 9-piece set. Blades: CHROME-VANADIUM, hardened and nickel-plated. Grips: impact-resistant plastic (cadmium-free), red. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth WM9 No. 906 Q 1.5«90, 2 «90, 2.5 «90, 3 « No. 906Q 4 «150, 5 «150 No. 906Q 6 «200, 8 «200, 10 «200 Specifications subject to chane without prior notice. 12

12 Hexaon key-sets (metric) No. 911-WM9 M Workshop stand with metric hexaon keys to ISO 2936 (DIN 911), 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: plastic-coated metal. Item Contents: A/F «blade lenth WM9 M 2.5, 3, 4, 5, 6, 8, 10, 12, 14 mm WM9 M-L Stand, empty for No. 911-WM9 M 590 No. 911L-WM9 M Workshop stand with lon metric hexaon keys to DIN 911L, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: plastic-coated metal. Item Contents: A/F «blade lenth L-WM9M 02.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 1700 No. 911-WM9 Workshop stand with metric hexaon keys to ISO 2936, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth WM9 02.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 840 with clips for connectin! No. 911L-WM9 Workshop stand with lon metric hexaon keys to ISO 2936L, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands. Item Contents: A/F «blade lenth L-WM9 2.5, 3, 4, 5, 6, 8, 10, 12, 14 mm L-WM9 L Stand, empty for No. 911L-WM9 195 Specifications subject to chane without prior notice. 13

13 Hexaon key-sets (metric) No. 911HM Key holders with metric hexaon keys to ISO Keys: CHROME-VANADIUM, hardened, end face machined, edes of end face chamfered. Holder: polyamide. Item Contents: A/F Blued HM9C 01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 245 Nickel-plated HM6D 01.5, 2, 2.5, 3, 4, 5 mm HM9D 01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 245 No. 911HM9D Hexaon keys, lon version (ISO 2936L) Item Contents: A/F Blued L-HM9C 01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 415 Nickel-plated L-HM9D01.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 415 Hexaon keys in holders are also available with our patented retainin rin, Item 911LF-HM9D, pae 23. No. 911HM9C No. 911L-HM9C No. 911L-HM9D No. 911RM Key rin with metric hexaon keys to ISO Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F RM8 2, 2.5, 3, 4, 5, 6, 8, 10 mm 260 Keys can be removed from their holdin sprins by turnin them slihtly clockwise. The key rin has a quick-action clip. Specifications subject to chane without prior notice. 14

14 Hexaon key-sets (metric) No. 911TM Key wallets with metric hexaon keys to ISO Plastic wallet with self-service rack slot and reusable closure. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F TM06 2, 2.5, 3, 4, 5, 6 mm TM08 2, 2.5, 3, 4, 5, 6, 8, 10 mm TM10 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14 mm 660 Key wallets, lon version (ISO 2936L) Item Contents: A/F L-TM7 2, 2.5, 3, 4, 5, 6, 8 mm 230 No. 911L-BM8D Key box with lon metric hexaon keys to ISO 2936, 8-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of Box: end face chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l«b«h , 2.5, 3, 4, 5, 6, 8, 10 mm 265«88« Specifications subject to chane without prior notice. 15

15 Hexaon key-sets (metric) Nr. 911BM7D Key box with metic hexaon keys to ISO 2936, 7-piece set. Keys: CHROM VANADIUM, hardend and nickel-plated, end face machined, edes Box: of end face chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l«b«h , 2.5, 3, 4, 5, 6, 8, mm 133«72« No. 911BM7-K Sales display carton, contains 10 key boxes No. 911BM7D Carton l«b«h «78« Nr. 911BM10D Key box with metric hexaon keys to ISO 2936, 8-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes Box: of end face chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l«b«h , 2.5, 3, 4, 5, 6, 8, 10 mm 177«88« No. 911BM10-K Sales display carton, contains 10 key boxes No. 911BM10D Carton l«b«h «93« Specifications subject to chane without prior notice. 16

16 Hexaon keys (inch) No. 2936DZ Hexaon keys (inch) CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. inch mm mm * « / « /64 * « / « / « / « /32 * « / « / « / « /32 * « /16 * « /80 7/16 * «50 129« / « / « / « /40 * « /80 * « « Keys marked * correspond to the metric size. Above 5/32 A/F they are marked with both sizes. No. 2936LDZ Hexaon keys (inch) lon version inch mm mm / « /64 * « / « / « / « /32 * « / « /32 1/ «36 186« /32 * « /16 * « / « / « /40 * « Keys marked * correspond to the metric size. Above 5/32 A/F they are marked with both sizes. Specifications subject to chane without prior notice. 17

17 No. 906QZ Hexaon keys with T-rip (inch) Blade: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free), yellow. Hexaon keys (inch) inch mm /64 * 2, / / / /32 * 4, / / / /16 * 8, Keys marked * correspond to the metric size. No. 911-WZ9 Workshop stand with inch hexaon keys to No. 2936DZ, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickelplated, edes of end face chamfered. Contents: A/F /32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/ Specifications subject to chane without prior notice. 18

18 Hexaon key-sets (inch) No. 911HZ 9D Key holders with inch hexaon keys to 2936DZ, 9-piece set. Keys: CHROM VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F HZ 9D 1/16 5/64 3/32 1/8 5/32 3/16 1/4 5/16 3/8 232 No. 911L HZ 9D Key holders with inch hexaon keys to No. 2936LDZ, 9-piece set. Keys: CHROM VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F LHZ 9D 1/16 5/64 3/32 1/8 5/32 3/16 1/4 5/16 3/8 395 No. 911BZ7 Key box with inch hexaon keys to 2936DZ, 7-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated, end face machined, edes of end face Box: chamfered. impact-resistant plastic with self-service rack slot. Contents: Box A/F l «b «h /64 3/32 1/8 5/32 3/16 7/32 1/4 133«72 « Specifications subject to chane without prior notice. 19

19 Hexaon key-sets (inch) No. 911 RZ Key rin with inch hexaon keys to No. 2936DZ, 8-piece set. Keys: CHROM-VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Item Contents: A/F RZ8 1/16 5/64 3/321/8 5/32 3/167/321/4 115 Keys can be removed from their holdin sprins by turnin them slihtly clockwise. The key rin has a quick-action clip. No. 911TZ Key wallets with inch hexaon keys to No. 2936DZ. Keys: CHROM VANADIUM, hardened and nickel-plated, end face machined, edes of end face chamfered. Plastic wallet with self-service rack slot and reusable closure. Item Contents: A/F TZ , 1/16 5/64 3/32 1/8 5/32 3/16 7/32 1/ TZ , 1/16 5/64 3/32 1/8 5/ TZ14 3/16 7/32 1/4 5/16 3/8 0.05, 1/16 5/64 3/32 1/8 5/32 3/16 7/32 1/4 5/16 3/8 7/16 1/2 9/ Specifications subject to chane without prior notice. 20

20 Hexaon keys with pilot (metric) DIN 6911D Hexaon keys with pilot (metric) for DIN 6912 screws, CHROME-VANADIUM, hardened and nickel-plated. mm mm «23 005, «29 010, «33 018, «38 030, «44 059, «50 103, «57 160, «70 260, «80 430,0 DIN 6911 BM7 Key box with hexaon keys to DIN 6911 (metric) with pilot for DIN 6912 screws, 7-piece set. Keys: CHROME-VANADIUM, Box: hardened and nickel-plated impact-resistant plastic. Contents: Box A/F l «b «h , 2.5, 3, 4, 5, 6, «72 « Specifications subject to chane without prior notice. 21

21 Hexaon keys with retainin rin (metric) Hexaon keys with patented retainin rin on the lon end. The touh sprin steel retainin rin on the lon end of these hexaon keys will hold a ISO 4762 socket screw reliably. Whether it be horizontal, vertically upwards, or downwards, the retainin function makes one of these tools the ideal partner when you have to thread a screw into an inaccessible hole and tihten it. Manetisin the end of the key common practice up to now is no loner necessary. No. 911LF-HM9D Key holder with hexaon keys No. 911LF with patented retainin rin and ISO 2936L hexaon keys, 9-piece set. Keys: CHROME-VANADIUM, hardened and nickel-plated. Sprin steel retainin rin. Holder: with slot for self-service rack. Contents: A/F ISO 2936L-1.5, 2, 2,5, 3 No. 911LF-4, 5, 6, 8 und Sizes 1.5, 2, 2.5 and 3 have no retainin rin Specifications subject to chane without prior notice. 22

22 Hexaon keys with retainin rin No. 911LGF-HM9D Key holder with ball-ended hexaon keys No. 911LGF with patented retainin rin and No. 911LG ball-ended hexaon keys, 9-piece set. Keys: CHROME-VANADIUM, hardened and chromium-plated. Sprin steel retainin rin. Holder: with slot for self-service rack. Contents: A/F DIN 911LG-1.5, 2, 2.5, No. 911LGF-4, 5, 6, 8, und 10 Sizes 1.5, 2, 2.5 and 3 have no retainin rin 440 No. 906QF-WM7 Workshop stand with No. 906QF T-rip keys with patented retainin rin and No. 906Q T-rip keys, 7-piece set. Blades: CHROME-VANADIUM, hardened and nickelplated. Sprin steel Grips: retainin rin. impact-resistant plastic (cadmium-free), black. Contents: A/F blade lenth No. 906Q 2.5, 3 - No. 906QF 4, 5, 6, 8, 10 mm 830 Sizes 2.5 and 3 have no retainin rin Specifications subject to chane without prior notice. 23

23 Ball-ended hexaon keys (metric) Applications At anles up to 25 speeds up work in hard-to-reach locations, easy but still precise entry of key into socket. Material Hihly alloyed chrome-vanadium steel ensures a lon workin-life, ood torque-resistance, and optimum hardness; see table on pae 6 for test torques. Execution and surface finish hardened and blued (version C) hardened and chromium-plated (version D) matt-chrome surface ives excellent corrosion protection. No. 911G-BM10 Key box with ball-ended, metric, short hexaon keys No. 911G, 8-piece set. Keys: CHROME-VANADIUM, hardened and blued, Box: impact-resistant plastic with self-service rack slot. Contents: Box A/F l «b «h , 2.5, 3, 4, 5, 6, 8, 10 mm 170 «88 « Specifications subject to chane without prior notice.

24 No. 911G-C Ball-ended metric hexaon key CHROME-VANADIUM, hardened and blued. Ball-ended hexaon keys (metric) mm mm « , ,0 52«18 0 2, « , ,0 66«23 0 5, ,0 74« , ,0 85« , ,0 96« , ,0 108« , ,0 122« ,0 No. 911 G-C No. 911G-TM7 Key wallet with ball-ended, metric, short hexaon keys No. 911G, 7-piece set. Keys: CHROME-VANADIUM, hardened and blued. Plastic wallet with slot for self-service rack and reusable closure. Contents: A/F , 2, 2.5, 3, 4, 5, 6 mm 75 Specifications subject to chane without prior notice. 25

25 Ball-ended hexaon keys (metric) No. 911LG-C Ball-ended metric hexaon key, lon version CHROME-VANADIUM, hardened and blued. mm mm « , ,0 102«18 003, « , ,0 129«23 009, ,0 144«29 019, ,0 165«33 034, ,0 186«38 054, ,0 208«44 110, ,0 234«50 190, ,0 262«57 295,0 No. 911 LG-C No. 911LG-D Ball-ended metric hexaon key, lon version CHROME-VANADIUM, hardened and chromium-plated. mm mm « , ,0 102«18 003, « , ,0 129«23 009, ,0 144«29 019, ,0 165«33 034, ,0 186«38 054, ,0 208«44 110, ,0 234«50 190, ,0 262«57 295,0 No. 911 LG-D No. 911LG-WM7 Workshop stand with ball-ended metric hexaon keys No. 911LG, 7-piece set. Keys: CHROME-VANADIUM, hardened and chromium-plated. Contents: A/F , 2.5, 3, 4, 5, 6, 8 mm 840 No. 911LG-WM9 Key holder with ball-ended metric hexaon keys No. 911LG, 9-piece set. Keys: CHROME-VANADIUM, hardened and blued. Contents: A/F , 2, 2.5, 3, 4, 5, 6, 8, 10 mm 615 Specifications subject to chane without prior notice. 26

26 Ball-ended hexaon keys (metric) No. 906QG Ball-ended metric hexaon key with T-rip Blade: CHROME-VANADIUM, Grip: hardened and nickel-plated impact-resistant plastic (cadmium-free), red. mm No. 906G Grip: Ball-ended metric hexaon key with screwdriver handle Blade: CHROME-VANADIUM, hardened and nickelplated. impact-resistant plastic (cadmium-free), red. mm No. 911LG-HMC Key holders with ball-ended metric hexaon keys No. 911LG, 7 or 9-piece set. Keys: CHROME-VANADIUM, hardened and blued, Holder: polyamide. Item Contents: A/F LG-HM7C 1.5, 2, 2.5, 3, 4, 5, 6 mm LG-HM9C 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm 440 No. 911LG-HM9D Key holder with ball-ended metric hexaon keys No. 911LG, 9-piece set. Keys: CHROME-VANADIUM, hardened and chromium-plated Holder: polyamide.d. Contents: A/F , 2, 2.5, 3, 4, 5, 6, 8, 10 mm 440 Ball-ended hexaon keys in key holder are also available with our patented retainin rin, Item 911LGF-HM9D, pae 23. No. 911LG-HM7C No. 911LG-HM9D Specifications subject to chane without prior notice. 27

27 No. 911LG-HM7 D Key holder (Kombiclip) With ball-ended hexaon keys (metric) 911LG, lon version, 7-piece set. Key: CHROM VANADIUM, hardened and nickel-plated. Ball-ended hexaon keys (metric) Contents A/F , 2, 2.5, 3, 4, 5, 6 mm 150 Applications: The key holder is a convenient, tidy way of storin 7 sizes of key, and can also be used as at T-rip by repositionin the key needed in the holder. No. 911LG-BM8 C Key box with ball-ended metric hexaon keys No. 911LG, 8-piece set. Keys:CHROME-VANADIUM, hardened and blued, Box:impact-resistant plastic with self-service rack slot. Contents:Box A/F l «b«h , 2.5, 3, 4, 5, 6, 8, 10 mm 265«88« No. 911LG-BM8D Key box with ball-ended metric hexaon keys No. 911LG, 8-piece set. Keys:CHROME-VANADIUM, hardened and chromium-plated. Box:impact-resistant plastic with self-service rack slot. Contents:Box A/F l «b«h , 2.5, 3, 4, 5, 6, 8, 10 mm 265«88« Specifications subject to chane without prior notice. 28

28 No. 911LG-TM8 Key wallet with ball-ended metric hexaon keys No. 911LG, 8-piece set. Keys:CHROME-VANADIUM, hardened and chromiumplated. Plastic wallet with slot for self-service rack and reusable closure. Ball-ended hexaon key-sets (metric) Contents: A/F , 2, 2.5, 3, 4, 5, 6, 8 mm 250 No. 909G Ball-ended SCHRAUB-boy Blade: hardened and blued Grip:hand-friendly, eronomic twocomponent body Item 909G G-4-10 mm 2, 2.5, 3, 4, 5, 6 4, 5, 6, 8, Specifications subject to chane without prior notice. 29

29 -Screwdrivers on the subject of applications for our -screwdrivers. TORX is a reistered trademark of Camcar/Textron Inc. Profile The wave-profile provides a lare surface for force and torque transfer optimum rip and lon tool-life see table on riht for test torques. Material hihly alloyed CHROME-VANADIUM steel Execution and surface finish hardened and blued hardened and chromium-plated Screwdrivers with handle, for -screws, compliment the well-known advantaes of this type of screw. best possible force transfer by handy ripforms. Table showin sockets for thread diameters and types of screw. Test Screws with -sockets torque Metric (M) Self-tappin (ST) DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN DIN Sizes mm Nm T * * * * * * * * * T * * * * * * * * * T T * * T T * T T / / /5.5 T27 T * 6 * 6 * 6 * 6 * 6 * 6 * 6.3 * 6.3 * 6.3 T T * * * * * * * * * T T *Special screws No. 918-HAT 8C - ball-ended screwdriver In key holder, 8-piece set. Keys: CHROM VANADIUM, hardened, steel rey. -ball-ended T9, 10, 15, 20, 25, 27, 30, Specifications subject to chane without prior notice.

30 -Screwdrivers No. 908 Anled keys Keys: CHROME-VANADIUM, hardened and blued. mm T « T « T « T « T « T « T « T « T « T « T « T « T « T « No. 907S keys with small rip Blade: CHROME-VANADIUM, hardened Grip: and blued. impact-resistant plastic (cadmium-free), reen... fast for low tihtenin torques T 6 T T T T e.. for cuttin tool tips! No. 907L keys with screwdriver handle Blade: CHROME-VANADIUM, hardened and blued. Grip: impact-resistant plastic (cadmium-free), reen T08 T T10 T T20 T T Specifications subject to chane without prior notice. 31

31 -Screwdriver-sets No. 907Q keys with T-rip Blade: CHROME-VANADIUM, hardened Grip: and chromium-plated. impact-resistant plastic (cadmium-free), reen T T10 T T20 T T27 T T T No. 907Q-WT7 Workshop stand (TORX) with T-rip TORX keys No. 907Q, 7-piece set. Blade: CHROME-VANADIUM, hardened and chromium-plated. Grips: impact-resistant plastic (cadmium-free), reen. Stand: sinle-rade, impact-resistant plastic with clips for connectin further workshop stands Contents: Torx «blade lenth T10x100, 15x100, 20x100, T25x100, 30x100, 40x100, 50x Space for two more TORXkeys No. 907S Specifications subject to chane without prior notice. 32

32 No. 908-TT 9 Key wallet with TORX keys No. 908, 9-piece set. Keys: CHROME-VANADIUM, hardened and blued. Plastic wallet with slot for self-service rack and reusable closure T6, 7, 8, 9, 10, 15, 20, 25, Screwdrivers-sets No. 909T SCHRAUB-boy (TORX) Blades: hardened and blued. Grip: hand-friendly, eronomic twocomponent body Item 909T T-8-40 T6, 7, 8, 9, 10, 15, 20 u. 25 T8, 10, 15, 20, 25, 27, 30 u Specifications subject to chane without prior notice. 33

33 Bits The advant antaes at a lance! Bit box: - Transparent plastic - Bits are visible without openin - A hexaon socket on the side lets you use it as a screwdriver - With removable belt clip Bit holder: - For all normal battery or electric screwdrivers - Quick-chane holder with ejector sprin for easier bit chanin Bits: - Quality bits with practical hardness/ touhness ratio - Hard enouh to prevent excessive wear, and at the same time touh enou to withstand torque peaks without breakin - TiN-coatin of bit tips: wear-resistant surface ensures lon workin life Structured surface: - Reduces required axial enaement force - Reduces daner of the tool slippin out of a screw head No Bits set, Standard Contents: , 5, 6, 7 PZ 1, 2, 3 PH 1, 2, 3 Quick-chane holder, manetic 65 mm 145 No. 929TiN-11 Bits set, Standard-TiN TiN-coated bit tips, Structured surface. Contents: , 5, 6, 7 PZ 1, 2, 3 PH 1, 2, 3 Quick-chane holder, manetic 65 mm 145 No Bits set, Contents: T 7, 8, 9, 10, 15, 20, 25, 27, 30, 40 Quick-chane holder, manetic 65 mm 145 No. 935TiN-11 Bits set, TiN-coated bit tips. -TiN Contents: T 7, 8, 9, 10, 15, 20, 25, 27, 30, 40 Quick-chane holder, manetic 65 mm 145 Specifications subject to chane without prior notice. 34

34 Bits No. 940S Quick-chane holder, manetic with ejector sprin for easier bit chanin. Drive end: Form E 6.3 (1/4 ) /4 65 1/4 35 No. 940 Universal holder, manetic Drive: 1/4 (form E 6.3) /4 59 1/4 22 No. 946L Bit holder with screwdriver handle, manetic Bit chuck: 1/4 hexaon, stainless steel Shaft: CHROM VANADIUM, nickel-plated. Grip: impact-resistant plastic (cadmium-free), blue / No. 946 Bit holder with T-rip, manetic Bit chuck: 1/4 hexaon, stainless steel. Shaft: CHROME-VANADIUM, Grip: nickel-plated impact-resistant plastic (cadmium-free), blue / Specifications subject to chane without prior notice. 35

35 Bits No. 923 Screwdriver bits Wear: DIN 3127 Drive: 1/4 (form C 6.3) No. 928 Phillips PH bits Wear: DIN 3128 Drive: 1/4 (form C 6.3) No. 929 Pozidriv PZ bits Wear: DIN 3128 Drive: 1/4 (form C 6.3) No. 935 TORX-Bits Drive: 1/4 (form C 6.3) T T 7 T T T T T T T T T No. 931 Hexaon bits Wear: DIN 7426 Drive: 1/4 (form C 6.3) Specifications subject to chane without prior notice. 36

36 Bits No. 923TiN Screwdriver bits TiN-coated bit tips, Structured surface. Workin tip: DIN 3127 Drive end: Form C 6.3 (1/4'') No. 928TiN Phillips PH bits TiN-coated bit tips, Structured surface. Workin tip: DIN 3128 Drive end: Form C 6.3 (1/4'') No. 929TiN Pozidriv PZ bits, TiN-coated bit tips, Structured surface. Workin tip: DIN 3128 Drive end: Form C 6.3 (1/4'') No. 935TiN TiN TORX bits TiN-coated bit tips, Drive end: Form C 6.3 (1/4'' T 6 T 7 T 8 T 9 T10 T15 T20 T25 T27 T30 T Specifications subject to chane without prior notice. 37

37 For trade and industry Tools for threaded fasteners for trade and industry. Trouhout the world, is a hallmark for hih-quality screwdrivin tools for tradespeople and industry. Our products prove themselves millions of times every day. From DIN to company standards. Technical perfection is our standard. The results of this quality: a lon workin-life, precise transmission of force and thus the reatest possible safety, and user-friendliness in every detail. From socket wrenches to hook wrenches, from pin wrenches to open-ended spanners, from drill drift to fire hydrant key, we have a broad and balanced proram of screwdrivin tools. Made of alloy steels with appropriate plated finishes for all applications. The followin paes will ive you an overview of this wide spectrum. Made-to-measure, from small to enormous. One of our specialities is the manufacturer of special tools to customers individual requirements. Special tools can also be made from existin ones but modified to meet your requirements. A drawin or sketch and the quantity required are all the information we need to quote. Applications and size ranes of our hook wrenches DIN 1810A Size DIN 1804 DIN 981 DIN DIN F Size DIN 1804 DIN 981 DIN DIN F M M KM KML M DN M M KM KML M DN

38 DIN 1810A Hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, machined nose, edes round, hardened and blued * 54593* * 54619* * * (38 045) * * 54650* * * (65 070) * * 54429* (85 092) * 54445* (98 105) * 54718* * 54734* * * 54759* * * 54775* * * 54841* * 54809* * 54825* * Thickness not to DIN. Hook wrenches Please note: Intermediate sizes and other material thicknesses for quantities above 100 on request. Available in stainless steel on request (up to 6 mm thick). DIN 1810AD Hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, machined nose, edes round, hardened and heat-treated * * 55129* * 55152* * 55178* * 55202* * 55236* * 55269* * 55285* * * Thickness not to DIN. Specifications subject to chane without prior notice. 39

39 Hook wrenches Application and size ranes Size DIN 1804 DIN 981 DIN F M M KM KML DN No. 771 Adjustable hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, round, hardened and blued No. 771Md Adjustable hook wrench with nose and torque-wrench fittin for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, hardened and blued. Drive: square socket / / / Specifications subject to chane without prior notice. 40

40 Hook wrenches Application and size ranes Size DIN 1804 DIN 981 DIN F DIN M M KM KML DN M , 140, , 28, ,170,180,190 32, 34, 36, 38 No. 775C Hined hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, hardened and blued. With hole for hanin up /4 175/5 250/7 290/8 420/ No. 775D Hined hook wrench with nose for rooved nuts to DIN 1804 and bearin nuts to DIN 981. Special steel, hardened and nickel-plated. With hole for hanin up /4 175/5 250/7 290/8 420/ No. 775NI Hined hook wrench with nose for rooved nuts to DIN 1804 and for couplins and fittins to DIN Stainless steel. With hole for hanin up DIN F DN /3 175/4 250/5 290/6 420/ Our comprehensive proram also includes stainless steel tole clamps. Specifications subject to chane without prior notice. 41

41 Hook wrenches Applications and size ranes of our hook wrenches 1810B and B Size DIN 1816 M 776 Size B Size DIN 1816 M 776 Size B DIN Size M Size DIN 1810B Hook wrench with pin for nuts with radial holes to DIN Special steel, hardened and blued , , , ,0 04, ,0 6,0 05,0 05, ,0 08,0 06,0 06, ,0 08,0 08,0 08,0 335/ * ,0 08, * ,0 08, * ,0 10, * 2250 * Thickness not to DIN. Available in stainless steel on request (up to 8 mm thick). DIN 1810BD Hook wrench with pin for nuts with radial holes to DIN Special steel, hardened and heat-treated , , ,0 3.5, ,0 0 5,0 04,0 06, ,0 05,0 08,0 08, / , , ,0 8, * ,0 8, * 800 * Thickness not to DIN. Specifications subject to chane without prior notice.

42 Hook wrenches Hined hook wrench with one-piece hook and pin. increases maximum torque by 50-80% compared with version with replaceable pin. loner workin life. No. 776C Hined hook wrench with pin for nuts with radial holes to DIN Special steel, edes round, hardened and blued. With hole for hanin up x ,0 x ,0 x 135/ ,0 x 05,0 x 175/ ,0 x 06,0 x 250/ ,0 x 08,0 x 290/ ,0 x 10,0 x 420/ x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 776D Hined hook wrench with pin for nuts with radial holes to DIN Special steel, hardened and nickelplated. With hole for hanin up x 3,0 x 135/ ,0 x 175/ ,0 x 250/ ,0 x 290/ ,0 x 420/ x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 776Md Hined hook wrench with pin and torque-wrench socket for nuts with radial holes to DIN Special steel, hardened and blued. Drive: square socket / No. 779D Spare pin with nut for use in our hined hook wrench 776 with replaceable pins. Special steel, nickel-plated. ˇD L L1 M , , , , ,0 5, ,0 6, , ,0 8, , ,0 10, , Specifications subject to chane without prior notice. 43

43 Adjustable pin wrenches No AZ Adjustable pin wrenches for nuts with 2 holes With replaceable, hardened pins (version AZ), fully assembled. With hole for hanin up. Special steel, blued. Item AZ AZ * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). No. 764AZ Hined pin wrenches for nuts with 2 holes With replaceable, hardened pins (version AZ), fully assembled. With hole for hanin up. Special steel, blued. Item AZ , AZ AZ AZ * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). No. 764AZ-04 Loose pins with nut for Nos. 758AZ, 759AZ, and 764AZ pin wrenches with replaceable pins. Special steel, hardened and blued. For wrench Item * l D L M 758AZ 759AZ 764AZ AZ , AZ ,0 M AZ , AZ , AZ ,0 M AZ , AZ , AZ , ,5 M AZ , AZ , ,0 M8 * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). Specifications subject to chane without prior notice. 44

44 Adjustable pin wrenches No Adjustable pin wrenches for nuts with 2 holes No. 756 with riveted pins, from No. 758 with pins electrically welded. Special steel, blued. Item x 02, ,0 x x 03, ,0 x 04, ,0 x 05, ,0 x 06, ,0 x 06, ,0 x 07, ,0 x 08, ,0 x 08, ,0 x 10, ,0 x 12, * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). x If no pin diameter is iven in the order, we supply the pin diameter marked. No CC Adjustable pin wrench for nuts with 2 holes, cranked With electrically welded pins. Special steel, hardened and blued Item 758CC 759CC , 3,0 4,0 x 5,0 6,0 x 20 27, , , * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). x If no pin diameter is iven in the order, we supply the pin diameter marked. No. 764C Hined pin wrenches for nuts with 2 holes With electrically welded pins. With hole for hanin up. Special steel, blued. Item ,0 x 04,0 x 04,0 05, ,0 x 05, ,0 x 06, ,0 x 07, ,0 x 07, ,0 x ,0 x 08, ,0 x 10,0 x 08,0 10, * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). x If no pin diameter is iven in the order, we supply the pin diameter marked. Specifications subject to chane without prior notice. 45

45 Fixed pin wrenches DIN 3116 Wrench for 2 hole flane-nuts For securin rindin wheels and cuttin discs. Special steel, zinc-plated. With electrically welded pins. Form A A 50 (6) C 35 (5) C ( * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). ( ) Not to DIN Form C Form A DIN 3116A Wrench for 2 hole nuts Special steel, blued. With electrically welded pins. (Zinc-plated on request) , (3) , (4), , **035** 0(4),0 05, ,0 05, ,0 05, ,0 06, ,0 06, ,0 07, , ,0 08, ,0 08, ,0 10, ,0 00, ,0 10, Made as specials for 10 pieces or more. For sinles see Item No ** Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). ** Standard size for commercially available anle-rinders and cutters. Size 13 has riveted pins. Sizes 13 and 15 without cut-out between pins for M8 and M10 nuts to DIN 547. ( ) Not to DIN DIN 3116C Cranked wrench for 2 hole nuts Special steel, blued. With electrically welded pins. Form C * Pin diameter = nominal diameter 0.1 mm (tolerance class h 12 ). Please note: This wrench is used for adjustin timin belt tensioners (AUDI, VW). Specifications subject to chane without prior notice. 46

46 Wrenches for machine tools No. 250 Collet chuck key for collet chuck nuts (ER) to DIN Special steel, hardened and zinc-plated. With hole for hanin up. DIN6499D Size Size No. 250 Md Key for collet chuck with torque-wrench fittin for chuck nuts (ER) to DIN Drive HH square socket with ballenaement roove. Special steel, hardened and zincplated Size Other sizes on request. DIN6499D Advantae: controlled tihtenin prevents damae to spindle chanin tools on a machine. No. 902 Md Open-ended spanner with torque-wrench fittin for clampin nuts. Drive HH square socket with ballenaement roove. Special steel, hardened and zincplated SW Advantae: controlled tihtenin prevents damae to spindle chanin tools on a machine. Specifications subject to chane without prior notice. 47

47 Wrenches for machine tools DIN 317 Drill drift Special steel, hardened and blued. Size For tapers Morse Metric « « « « « No. 318 Drill drift, semi-automatic for DIN 228 morse tapers Special steel, hardened and blued. Grip: plastic-coated, red. Size 1-3 with finer protection! Size Morse Advantae: - With finer protection (Size 1-3) - One-hand operation - Pressure on the lever moves a ear rack between two opposin wedes (the other hand holds the tool to prevent it fallin) - Releasin tools usin the semi-automatic drift helps prevent spindle dam Specifications subject to chane without prior notice. 48

48 Wrenches for machine tools No. 960 Socket wrench for coolant tubes HSK-A (Hollow cone to DIN 69893) Socket: special steel, hardened and blued. Grip: impact-resistant plastic (cadmiumfree), black. Size = HSK-A ,4 6,1/8, ,9 8,1/10, ,9 10,1/14, ,4 12,2/16, ,4 14,2/18, ,9 16,2/22, On request with advertisin or company imprint, please see pae 4. No. 250K Collet chuck key (Mini) for collet chuck nuts (ER). Special steel, hardened and blued. Size for nuts M DIN 6368 DIN 6368 Wrench for millin arbor screws For tihtenin millin arbor screws to DIN Special steel, hardened and blued M M M M M M M M * The size iven here is the diameter of the mandrel on the millin arbor. Specifications subject to chane without prior notice. 49

49 Wrenches for machine tools No. 6368S Safety wrench for millin arbor screws For safely tihtenin millin arbor screws to DIN No more slippin off when tihtenin millin arbor screws! Special steel, hardened and blued. Safety knob made of red plastic and free to rotate M M M M M * The size iven here is the diameter of the mandrel on the millin arbor. No. 6368SK Safty knob for retro-fittin with spacer and retainin screw (diameter of hole in wrench 7.1 mm) Safety at work! The eronomic form of the safety knob on this wrench makes it easy to prevent the tool slippin off when tihtenin or loosenin millin arbor screws. Specifications subject to chane without prior notice. 50

50 Socket wrenches DIN 22417A Trianular socket spanner Special steel, body and tommy bar zinc-plated M04 090« « M05 100« « M06 115« « M08 125« « M10 140« « M12 160« « M16 180« « * The size refers to the screw diameter These spanners are intended for trianular-head screws to DIN and nuts to DIN The M12 size is especially suitable for installin and removin steel and aluminium access-denial posts. DIN 905 Chuck keys, square Special steel, body and tommy bar hardened and blued (4) «12 000«00 160«06 000« «12 160« (7) «16 180« «00 100«20 000«00 200« «24 250« «28 320« «34 200«36 000«00 400« «42 250«45 630« ( ) Not DIN size DIN 7417 Square socket key Malleable iron nickel-plated Specifications subject to chane without prior notice. 51

51 Socket wrenches No. 914Q Square socket spanner with T-rip Socket: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free) , , , Other lenths and executions on request. On request with advertisin or company imprint, please see pae 4. DIN 904 Square socket spanner Special steel, body and tommy bar hardened and blued (4) «12 000«00 160«06 000« «12 160« (7) «00 080«16 180«08 000« (9) «18 100«20 180«08 200« «00 100«24 000«00 250« «28 320« «34 200«36 000«00 400« * 200«42 250«45 500«18 630« DIN 904 L DIN 904 DIN 904L Square socket spanner, lon version. Special steel, body and tommy bar hardened and blued (5) 0(6) 120«12 160«12 160«06 000« (8) 160«16 180« (9) 200«18 200« (10) 200«20 200« «24 250« «28 320« * 19 * 250«34 320«36 000«00 400« * Contrary to DIN standard, shaft is not bored. ( ) Not DIN size. DIN 248 Square rin spanner Special steel, hardened and blued Specifications subject to chane without prior notice. 52

52 Socket wrenches No. 916Q Hexaon socket spanners with T-rip Socket: CHROME-VANADIUM, Grip: hardened and nickel-plated. impact-resistant plastic (cadmium-free) , , , , , , ,0 10, , , , , ,0 17,0 * On request with advertisin or company imprint, please see pae 4. DIN 659 Tubular box spanners Special steel, hardened and blued , , * * * 22 * , * 27 ** , * * hardened and zinc-plated ** while stock last DIN 900 A Tommy bar for DIN 659 and DIN 896B Special steel, hardened and blued. l * * * * * hardened and zinc-plated Specifications subject to chane without prior notice. 53

53 Open-ended spanners DIN 894 Open-ended spanners, sinle-ended Special steel forin, jaws machined, anle of jaws 15, hardened and phosphated. Metric thread size * * * * * Size to old DIN standard. No. 714 Open-ended spanners, double-ended, thin version CHROME-VANADIUM, hardened and briht nickel-plated. Jaws machined to DIN 475 Extra thin open-ended spanners «03.5 4« «05.5 6« «08,0 9«10, , Other sizes on request. (for office machinery) No. 714 T-6D Open-ended spanners, double-ended, thin version In plastic wallet, 6-piece set. Contents: «3.5, 4«4.5, 5«5.5, 6«6.5, 7«8, 9«10 90 The table shows the across-flat (A/F) sizes for metric, Whitworth, and BSP threads A/F Metric thread size mm (ISO 272) 1.4 Woodscrews mm (DIN 571) Sheetscrews (ISO 1479, DIN 6928) Specifications subject to chane without prior notice. 54

54 Customer specials Not available from stock The manufacture of special handtools to customers' individual requirements is an speciality. Such handtools can be either specially desined and produced, or cost-effectively modified from an item in the comprehensive AMF product rane to meet your needs. To start with, drawins or sketches and the required quantities are all we need. Specials, just as you need them, in widely differin forms and versions. Top quality for a lon workin life. From specialists for specialists! Please formulate your enquiry as accurately as possible. We assure you that we will reply by return. The details we need are iven in the list below. 1) DIN desination or drawin 2) Quantity. 3) Across-flats size and anle of jaws (A). 4) Material: special steel, CrV steel, or stainless steel. 5) Execution of edes: punch-rounded, broken by buffin, ede round etc. 6) Thickness of spanner (B). 7) Strenth requirements: hardened or unhardened. 8) Surface finish: blued, nickel-plated or zinc-plated. 9) Markin (C): company name, size, description. 10) For hook wrenches: hook form, pin diameter. 11) For pin spanners: pin spacin and diameter. 12) Delivery date. 55

55 Customer specials Not available from stock No. 902 Open-ended spanner sinle-ended stamped from steel sheet. Material, thickness, strenth properties and other details to your specification. * Minimum order qty. 3/3.2/3.5/ / / / / / / /16/ /19/ /22/ /25/ / /32/ / / * Optimum thickness rane. No. 685 Open-ended spanner, short form * Minimum order qty. 8/ /11/ /14/ / / /21/22/23/ /26/27/28 130/ / * Optimum thickness rane. 56

56 No. 658 Open-ended spanner sinle-ended stamped from steel sheet. Material, thickness, strenth properties and other details to your specification. Customer specials Not available from stock * Minimum order qty * Optimum thickness rane. No. 710 Open-ended spanner double-ended (German Post standard) Minimum order qty DIN 3115 Spanner for nuts with slotted face, version B Nuts size a b f h L f M M M M M M M M M