Stripping tools. Tools
|
|
- Damon Smith
- 5 years ago
- Views:
Transcription
1 After a conductor has been cut it is then prepared for the next step or for crimpin. For this purpose, a specific lenth of the conductor insulation has to be removed, while preventin damae to the conductor. The lenth of the conductor insulation to be removed depends on the terminal clampin point or the crimp to be processed. Professional strippin tools uarantee perfect results due to precise adjustment of the tool to the correspondin insulation and the conductor cross-section. Precision tools by Weidmüller uarantee that the user will always obtain consistent, reliable strippin results..14
2 Strippin means the cuttin and removal of the insulation. The followin must be ensured in performin this task: The strippin dimension must be observed and neither the conductor nor the remainin insulation must be damaed. DI IEC 352 part 2 (previously DI IEC 48/290) contains references to strippin faults which must be avoided: Correctly stripped conductor Possible faults durin strippin: Insulation has not been cut properly Remains of the conductor insulation are still to be found on the stripped conductor To avoid these faults, it is important that the strippin tool is suited to the insulation and to the cross-section rane of the conductor. Cable knives (pocket knives) should certainly not be used, because the strippin quality here depends on the manual dexterity of the user. The quality is not consistent, even when the user is hihly skilled. Preference should be iven to hand-operated tools which adjust automatically to the correspondin cross-section of the conductor. They do not cause any damae to the conductor durin strippin and avoid the previously listed faults. stripax strippin tools uarantee a consistent strippin result which complies with DI reulations. The tools are rated for standard dimension PVC insulation. Any PVC insulation thicknesses deviatin from normal can be set manually. The conductor stopper and interated wire cutter allow hihly versatile use of the tools. Special insulation types such as Teflon, Silicone and Kapton require special strippin tools. These tools strip the conductor with punch blades. The conductor insulation has been damaed by the strippin tool Sinle conductors have been damaed or cut off by the strippin tool Sinle conductors have been twisted too tihtly afterwards Sinle conductors are no loner twisted..15
3 Strippin- and cuttin tools Stripax Stripax 16 For stranded and solid conductors with PVCinsulation Strippin lenth adjustable with wire stop Automatic openin of the clampin jaws after strippin o strayin of the individual conductor Adjustable to different insulation thicknesses Cable with double insulation in two processin steps without special adjustment Blade-device free from float and self-adjustable Lon durability Optimised eronomically desin Strippin and cuttin tool for flexible conductors with PVC-insulation of (~AWG ) o damain of the conductor due to special, self-adjustable strippin blades Processin of multi-conductors, with thin flat ribbon cables even multiple conductors in one operation Strippin and cuttin tool for flexible and massive conductors with PVC-insulation of (~AWG ) Cuttin of flexible and massive conductors up to 6 2 (AWG 10) o damain of the conductor due to special blade forms Max. strippin performance copper cable Conductor cross-section 2 Cuttin performance Max. cuttin performance 2 Stripax flexible & solid PVC conductors 0, Stripax 16 flexible & solid PVC conductors Cleanin brush Spare strippin blades Spare strippin blades Cleanin brush Delivery times see pae X.2
4 Special strippin tool Quick and accurate strippin Positionin of cuttin depth not neccesary o damae to the inner conductor AM ASI LWL-stripax AM ASI For ASI-cables with ued isolation Trouble-free cuttin of the inner conductor AM ASI special For ASI-cable types TPE- and PUR- isolation Easy positionin of the conductor with the interated wire stop Strippin and cuttin tool for plastic optical fibres with an inner conductor 1 ø Strippin lenth adjustable via wire stop Automatic openin of the clampin jaws after strippin Max. strippin performance copper cable AM ASI AM ASI spezial LWL-stripax ASI-EPDM ASI-TPE POF conductor with an inner conductor 1 Ø Conductor cross-section Cuttin performance Max. cuttin performance Strippin lenth limitless Spare strippin blades Delivery times see pae X.2.17
5 Strippin and cuttin tool Mini-duro-stripax Knife set Strippin and cuttin tool for conductors with special insulation types for conductor diameters (~ AWG 32 18) Flexible and solid conductors with PVC, Teflon () and silicone insulation Special punch blades do not damae the conductor o splicin of the sinle conductors Knife inserts can be easily replaced All inserts for one housin Strippin diameter max. cuttin performance Selection of blade sets Colour (min./max.) AWG white yellow /1. 32/7. 30/1. 30/7 red /1. 28/7. 28/19.26/1 reen /7. 24/19. 22/1. blue /7. 20/19 black /1. 18/7. 18/19 2 Insulation material PVC / silicone 26/7. 26/19. 24/1 22/7. 22/19. 20/1 with knife set (Qty = 1) Tool with all knife sets (Qty = 1) Knife set (Qty = 1) Delivery times see pae X.2
6 Sheathin stripper tool Strippin tool for round PVC cables AM25 and AM35 AM12 AM25: for round cables of Ø AM35: for round cables of Ø Strippin of the insulation is possible at every desired position of the cable Pivotin blade for round-, lenthwise- and spiral cuts Retainin bracket with interated blade to break open or make an incision in insulations Interated spare blade Cuttin of UTP and STP data cables and other flexible copper cables with a diameter of up to 4 2 (~AWG11) Strippin of the outer insulations of UTP and STP data cables and other round cables with ø 0, ,5 o damae to the shieldin or conductor by an adjustable strippin blade aue for repeated strippin lenths Max. cuttin performance copper cable Conductor cross-section 2 Cuttin performance Max. cuttin performance 2 on-shielded & shielded data cables Flexible copper cable 2 AM25 AM35 PVC-round cable PVC-round cable adjustable up to 4.5 adjustable up to 4.5 AM12 UTP and STP data cables... AWG adjustable Spare blades Delivery times see pae X.2.19
7 Strippin tool for coaxial cable CST 1-, 2- and 3-level strippin in one operation Cutter cassettes for CST Strippin tool for coaxial cable and round (shielded) data cables of ø Fast chaneover to other cable types due to adjustable and interchaneable screw holder Accompanyin settin block allows a quick preadjustment of the cuttin Interchanable cassettes with standard blade settins Cutter cassettes usable on both sides Max. cuttin performance copper cable Conductor cross-section 2 Cuttin performance Max. cuttin performance 2 on-shielded & shielded data cables Flexible copper cable 2 CST coaxial & round data lines Colour cutter cassettes B [] C [] rey 3,9 red 6,0 yellow 12,0 blue 6,5 reen 7,1 5,1 brown 7,5 3,5 orane 8,0 3,7 liht reen 6,0 6,0 black 8,6 2, Dimension A as indicated by the connector manufacturer (not defined by the tool) Orderin data Colour cutter cassettes Qty. Order o rey red yellow blue reen brown orane liht reen black Dim. A as stated by the man. (not def. by the tool).20 Delivery times see pae X.2
8 Strippin tool for coaxial cable CST vario 1-, 2- and 3-level strippin in one operation Strippin tool for coaxial cable and round (shielded) data cables of ø Freely adjustable strippin lenths in pitches of 1 for shieldin and dielectric material (minimum strippin lenth approx. 3.2 ) Fast chaneover to other cable types Max. total strippin lenth 17 Incl. 3 blades Max. cuttin performance copper cable Conductor cross-section 2 CST vario coaxial & round data lines Cuttin performance Max. cuttin performance 2 on-shielded & shielded data cables Flexible copper cable Blade holder Blade insert Screwdriver Spare blade set (1 set = 3 blades) Delivery times see pae X.2.21
Around the cable. Stripping.... convincing solutions
Around the cable Stripping... convincing solutions INFO Cable strippers How to use: For removing the exterior protective sleeve Junctions and distribution boxes For lengthwise and circular cuts Round PVC
More informationCRIMPING PLIERS. 52 Crimping Pliers also for two-hand operation. Number of crimping positions. Article No mm AWG
52 Crimpin Pliers also for two-hand operation 52 04 for solder-free electrical connections the inenious lever transmission reduces the handforce up to 30 % compared with reular pliers repetitive, hih quality
More informationAround the cable. Stripping. Cable strippers, Wire stripping pliers. haupa...technology that connects
Around the cable Stripping Cable strippers, Wire stripping pliers haupa...technology that connects Cable strippers INFO Cable strippers For quick and simple stripping of the outer protective sheath. Applications:
More informationAutomatic machines. Index Search according to type or order number, worldwide activities
CATALOGUE 6 Tools Tools Certification Cutting Stripping Crimping Pliers Screwdrivers Measuring/Testing Tool sets A B C D E F G H Automatic machines I Accessories J Appendix Index Search according to type
More informationTools and ferrules. Contents. Tools and ferrules. Tools and ferrules J.1
Contents Cutting, stripping and crimping tools.2 Rechargeable and electric torque screwdriver.10 Screwdrivers.12 Wire end ferrules / Insulated cable lugs.21 Wire end ferrules with plastic collar.22 Twin-wire
More informationShort Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
More informationVoice/Data/ Video Tools
Voice/Data/ Video Tools Professionals prefer Klein's high quality materials and construction for durable long-lasting tools. Klein VDV Tools provide time savings and reliability, especially in high-volume
More informationSafe Tool holding system by Beta. Height-Safe
afe Tool holdin system by Beta Heiht-afe 2 H-FE CTOGUE H-FE Tool holdin system by Beta For jobs to be carried out hih from the round or in the presence of mechanical movin parts, safety is a key factor
More informationTools. Tools. Appendix CATALOGUE. Certification. Cutting. Stripping. Crimping. Pliers. Screwdrivers. Measuring/Testing. Tool sets. Automatic machines
CATALOGUE 6 Tools Tools Certification Cutting Stripping Crimping Pliers Screwdrivers Measuring/Testing Tool sets A B C D E F G H Automatic machines I Accessories J Appendix Index Search according to type
More information16. Electricity Hole punches and accessories 642. Cable sheath strippers 624. Wire strippers 626. Physical measurement 650
622 www.facom.com 16. Electricity Cable sheath strippers 624 Hole punches and accessories 642 Pivotin blade sheath strippers... 624 Straiht/helical blade sheath strippers... 624 Multi-function sheath strippers...
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationData sheet chainflex CF140.UL
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture 4. CFRIP: Tear strip
More information8 PIPE TOOLS, MISCELLANEOUS TOOLS
PIPE TOOS, MISCEANEOUS TOOS PIPE TOOS PAGE 290 HAMMES PAGE 292 CHISES, DIFT PINS, CENTE PUNCHES, PIN PUNCHES PAGE 293 SCAPES, FIES, HACKSAWS PAGE 296 THEAD TOOS PAGE 29 SCEW EXTACTO, STUD EMOVE, NUT SPITTES
More informationModula Plus. Technical documentation Ver 1.01
Modula Plus Technical documentation Ver 1.01 Table of contents Introduction Overview 2 General characteristics Main characteristics 4 Functional sements of a column 6 Main components of a functional 8
More informationData sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
More informationPROFESSIONAL MODULAR CRIMPS, STRIPS & CUTS TOOL
PROFESSIONAL MODULAR CRIMPS, STRIPS & CUTS TOOL Tool 200A/200AR design with 10 position punches. For crimping 8P8C plug, please use AMP 8p8c plug with 2 extra cavities on each side as Fig. 1. Tool 2008A/2008AR
More informationData sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
More informationHand Tools and Accessories for AMP NETCONNECT
Hand Tools and Accessories for AMP NETCONNECT Hand Tools and Acessories for AMP NETCONNECT GATD Global Application Tooling Division Corex Coax Stripper For Cables with a Jacket diameter of 2.54 to 7.62
More informationCatalogue 2018 Mobile Security
ABUS l Auust Bremicker Söhne www.abus.com Cataloue 2018 Mobile Security Motorbike and Scooter Locks ULTIMATE SECURITY PACKAGES 59/12HKS170 + 8077 + 71950 59/12HKS170black l. 8077 reen 71949 59/12HKS170black
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationDOWNSPOT DESIGN - QUATTROBI TECHNICAL DEPARTMENT
DOWNSPOT Small-sized fixed and adjustable recessed luminaires combine the latest technoloy with a focus on details, i.e. special finishin and colours, to provide decorative solutions which play the main
More informationSENSOTORK 701 Electronic torque wrench
Torque tools SENSOTOK 70 Electronic torque wrench 2 3 4 6 Advantaes at a lance Slim, compact shape for smaller torques from N m upwards Units of measure: N m, cn m, ft lb, in lb eadins independent of point
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationFNH-aR High Speed Fuses. Motors Automation Energy Transmission & Distribution Coatings
FNH-aR Motors Automation Enery Transmission & Distribution Coatins www.we.net WEG ar fuses are available from 20 to 1000 A and were desined accordin to IEC 60269 and dimensional requirements of DIN 43620.
More informationFor the plastics machinery industry Adjustable bayonet thermocouple Model TC47-AB
Electrical temperature measurement For the plastics machinery industry Adjustable bayonet Model TC47-AB WIKA data sheet TE 67.20 Applications Plastics and rubber industry For direct installation into the
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63827-0870 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-0800 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically
More informationELATECH. isync T - AT. isync
ELATECH In the spirit of continuos innovation, in order to answer to the increased need of industry in power transmission, ELATECH has developed the rane of belts. belts are made with special polyurethane
More informationInsulated multipole operating tools for front-entry terminal blocks. 1-pole pole pole
Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for
More informationMX Cable Connector Kit Manual Manual for Trimming the Cable and Connecting the Connector to an MX8031 Extension Cable
MX8020-001 Cable Connector Kit Manual Manual for Trimming the Cable and Connecting the Connector to an MX8031 Extension Cable The Metrix MX8020-001 Cable Trimming and Connector Kit provides an easy way
More informationFor the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB
Electrical temperature measurement For the plastics machinery industry Fixed bayonet Model TC47-FB WIKA data sheet TE 67.24 Applications Plastics and rubber industry For direct installation into the process
More information2 - HANDLING AND HOISTING COMMISSIONING...5
Instructions for use I CONTENTS pae 1 - GENERAL...3 1.1 - GENERAL SAFETY REGULATIONS...3 1.1.1 - STANDARD SAFETY DEVICES...3 1.2 - FIELD OF USE...3 1.3 - OVERALL DIMENSIONS...3 1.4 - SPECIFICATION...4
More informationTGK Katalog / TGK Catalog
4405 Sandblasting unit simple 5131002 Sandblast cabin MINI B: 580 x H: 295 x T: 480 mm 5120001 Compressor for cabine 5131002-24 ltr. tank on wheels 206l/min/140l/minl/8 bar/1,5 KW/ 230 V 5131003 Spiral
More informationFive ways! Service Guarantee 2 HAND TOOLS. Company history. Dear Customers,
Company history 1890: Company founded by Andreas Maier as a lock manufacturer. 1920: Production proram extended to include spanners 1928: Production-line assembly of Fellbach locks. 1951: With the introduction
More informationTechnical data sheet LÜTZE SUPERFLEX PLUS (C) PUR FEEDBACK Encoder cables for Siemens and other systems For highest requirements in drive technology
PUR feedback cables C-track compatible Subject to technical modification 111456 Identification Type SU+(C)P SE(4 0,5+4 2 0,38)UL 30V GN SIEMENS designation* 1BD21 Use/Application/Characteristics Application
More informationTooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22
More informationLinear Bushings. Description of each series and Table of dimensions
Linear Bushins escription of each series and Table of dimensions Linear Bushin G Pae - to -9 Linear Bushin Pae - to -7 ompact Linear Bushin Pae -7 to -77 Miniature Linear Bushin Pae -7 to - In the table
More informationData sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Shield foil: Aluminium clad plastic foil 4. Banding: Plastic foil 5. Filling: Plastic yarns 6.
More informationWG20 Geared Motors. Motors Automation Energy Transmission & Distribution Coatings
WG20 Geared Motors Motors Automation Enery Transmission & Distribution Coatins www.we.net WEG Group - Transformin enery into solutions. WEG is a leadin lobal manufacturer and solutions provider of drive
More information3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit
3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions
More informationMy family my fields my Fendt.
Fendt E-Series 5185 Fendt kw HP PS 5185 E 129 175 My family my fields my Fendt. You can always rely on your family. Just like on the next eneration of the Fendt E-Series. These redesined combines are equipped
More informationKNIPEX Quality Made in Germany. KNIPEX Tool Cases and Tool Kits
KNIPEX Quality Made in Germany KNIPEX Tool Cases and Tool Kits Tool Case Robust34 Electric 26 parts For the touhest operatin conditions: dust-tiht, waterproof and temperature resistant Filled with 26 branded
More informationData sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
More informationTechnical data sheet LÜTZE SUPERFLEX PLUS M (C) PUR SERVO 0.6/1 kv Supply line for Bosch Rexroth and other systems For highest requirements
PVC servo cables C-track compatible shielded Subject to technical modification 111270 Identification Type SU+M(C)P SE(4G1,0+2 (2 0,75))UL 1KV OR INK Description* INK 0653 Use/Application/Properties Application
More informationSwitches 10AX/16AX. Safety. Easy Operation. Switch Mechanism. Characteristics of Urea Resin. Screwless Terminal (reduces installation work) Features
FLATIMA SERIES Switches 0AX/6AX Way Switch Intermediate Switch Push Button Safety PBT Resin Silver Alloy Contact Superior Arc Resistance and Anti-Deposition Properties Spring with Double Contact Points
More informationWiha new products brochure 2011.
Wiha new products brochure 2011. Valid from 1.3.2011 Wiha Content. DynamicJoint Wiha slimtechnology Maximum cutting performance Up to 40% less force required for cutting Long life maximum cutting quality!
More informationmanipulators + carts the perfect match
manipulators + carts the perfect match esmo manipulators, carts, and test floor equipment excellent cost/performance ratio for most reliable testin All esmo manipulator products are available with standardized
More informationREPAIR for: Sidelamp Bulb(s) Faulty, Left Tail Lamp Faulty, Right Tail Lamp Faulty, Directional Indicator Faulty, Left Hand Stop Bulb Faulty
REPAIR for: Sidelamp Bulb(s) Faulty, Left Tail Lamp Faulty, Right Tail Lamp Faulty, Directional Indicator Faulty, Left Hand Stop Bulb Faulty DIFFICULTY LEVEL: ***** Drilling, Wire Crimping, Tight Spaces,
More informationApplication Specification Circular Plastic Connector (CPC) Series 45 System 05 AUG 14 Rev D
Application Specification Circular Plastic Connector (CPC) 114-13137 Series 45 System 05 AUG 14 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationData sheet chainflex CF130.UL
1. Outer jacket: Pressure extruded, gusset-filling PVC mixture 2. CFRIP: Tear strip for faster cable stripping 3. Core insulation: Mechanically high-quality TPE mixture 4. Conductor: Fine-wire strand consisting
More informationTELEDYNE INTERCONNECT DEVICES. by TELEDYNE. Handheld Thermal Wire Stripper. Easy to use - Safe and NICK FREE stripping
STRIPALL by TELEDYNE Handheld Thermal Wire Stripper STRIPALL is designed to remove insulation thermally, without nicking the conductor. The insulation is stripped cleanly and quickly, readying the wire
More informationWiring Assembly Instructions Section 5 P/N CASS P/N 1899AS RG316 P/N CASS P/N 1899AS RG316
Ver. 2.7 CASS USER S MANUAL VPC Tools Required For the assembly of the Mini-Coaxial Contact(s) VPC P/N 610 103 115/CASS P/N 1899AS284-01 and/or P/N 610 103 159/1899AS284-04 the following parts are required
More informationHeavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
More informationFor the plastics machinery industry Manifold thermocouple Model TC47-MT
Electrical temperature measurement For the plastics machinery industry Manifold Model TC47-MT WIKA data sheet TE 67.21 Applications Plastics and rubber industry Hot runner manifolds for injection mould
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationData sheet chainflex CF5
1. Outer jacket: Pressure extruded, gusset-filling, oilresistant PVC mixture 2. Core insulation: Mechanically high-quality TPE or PVC mixture 3. CFRIP: Tear strip for faster cable stripping 4. Conductor:
More informationKNT Type Keyless Drill Chucks FOR DRILL ONLY, NOT FOR END MILL OR TAP
-Taster V- COE 219-001 Find your exact zero points in all three axes in seconds with the new distance measurin scale (raduated and analoue). 20 h 7 =12 With Standard Stylus %OFN VFOH IRU UGO GHÀHFWRQ HG
More informationKlauke expert knowledge Wire stripping quick, simple and safe
www.klauke.com Klauke expert knowledge Wire stripping quick, simple and safe WIRE STRIPPING QUICK, SIMPLE AND SAFE THE BEST TIPS ON HOW TO EFFICIENTLY CUT WIRES A clean and straight cut that neither deforms
More informationTerminal Can Wrench Discrete Connector Presser Plier No. 3 Square Tipped Driver Booth Wrench Security Tool
Speciality Tools Speciality Tools Terminal Can Wrench Discrete Connector Presser Plier No. 3 Square Tipped Driver Booth Wrench Security Tool 0000063993 PT-216C Terminal Wrench Can Wrench 7463027500 PT-891
More informationBackside License Plate Mount for Jeep JK Wrangler
REQUIRED TOOLS 10mm SOCKET 13mm SOCKET 4mm HEX KEY WIRE CRIMPS WIRE STRIPPERS ELECTICAL TAPE SCREW DRIVER KIT CONTAINS BACKSIDE MOUNT LICENSE PLATE BRACKET WITH LEDS PLASTIC PASS-THROUGH GROMMET STAINLESS
More informationTensioning equipment. Handling and uncoiling blocks 148. Tensioning equipment 149. Hoist ratchet and Guying equipment 151.
Tensionin equipment Handlin and uncoilin blocks 148 Tensionin equipment 149 Hoist ratchet and Guyin equipment 151 Dynamometers 152 Handlin and uncoilin blocks Uncoilin block Groove bottom Cable Workin
More information240V UPS Typical Installation Guide
240V UPS Typical Installation Guide Warning!!! High Battery DC Voltages can Cause Serious Injury or Death. Installation should only be done by suitable qualified personal. Aug, 2016 1 www.balancell.com
More informationData sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
More informationData sheet chainflex CF881
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Banding: Plastic foil 4. Core insulation: Mechanically high-quality PVC mixture 5. Conductor: Stranded
More informationTool sets. Contents. Tool sets. Tool sets H.1. Introduction H.2. Tool cases H.4. Crimp Sets and accessories H.5. Assortment boxes and cases H.
Contents Tool sets Tool sets Tool sets Introduction H.2 Tool cases H.4 Crimp Sets and accessories H.5 Assortment boxes and cases H.11 Inserts H.12 H H.1 Introduction Tool sets Weidmüller offers a comprehensive
More informationNELDISC Metal seated high performance triple eccentric disc valve Series L6, L4 Installation, Maintenance and Operating Instructions
NELDISC Metal seated hih performance triple eccentric disc valve Series L6, L4 Installation, Maintenance and Operatin Instructions 2 L6 70 en 10/2017 2 2 L6 70 en Table of Contents 1 GENERAL...3 1.1 Scope
More informationViking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
More informationTOOLS AND TESTERS TERA 10G 6A F/UTP 10G 6A UTP. System 6 UTP. Premium 5e F/UTP. Premium 5e UTP. Fibre Cable Assemblies, Connectors and Cable
13.0 W W W. S I E M O N. C O M SECTION CONTENTS STM-8.............................. 13.2 13.3 STM-8........................... 13.3 S110 Test Adapters......................... 13.4 S814 Impact Tool............................
More informationPUR c-track cables For highest requirements
2. C-track cables PUR c-track cables For highest requirements LÜTZE SUPERFLEX PLUS N PUR UL 300 V Machine and device construction, transport and conveyor technology Through full PUR jacket and TPE conductor
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationTorque Control & Multipliers
200 180 160 140 120 100 80 60 190 170 150 130 110 90 70 50 Torque Control & Multipliers Torque Wrench Interchaneable Torque Wrench Electronic Torque Wrench Electronic Torque Adapter Torque Screwdriver
More informationSEALED PLATINUM SURFACE TEMPERATURE SENSOR MODEL 29399
DATA SHEET R-SCAPLC SEALED PLATINUM SURFACE TEMPERATURE SENSOR MODEL 29399 This low cost, sealed platinum surface RTD is the world s toughest for surface temperature measurement. The IEC 751 sensor is
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationQT-III Cold Shrink Silicone Rubber
QT-III Cold Shrink Silicone Rubber 7600-T-3RJS Series 3/C Cabinet Termination Instructions Kit Contents: 3ÑSilicone Rubber Phase Re-jacketing Sleeve Assembly 3ÑCold Shrink Silicone Rubber Termination Assembly
More informationCabling Instructions NOνA Project Written By: Dale Mudd September 21 st, 2010
Cabling Instructions NOνA Project Written By: Dale Mudd September 21 st, 2010 P#= Part Number NOTE: Specific crimp tools located at end FEB/TEC Lower Voltage Cables Bottom of SB120 to Bottom of 60A Breaker:
More information3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series
3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working
More informationProfessional tools 1. From Phoenix Contact. General information
Professional tools 1 From Phoenix Contact General information Good results can only be obtained with the right tools. For this reason, Phoenix Contact offers suitable tools for each application. The product
More informationData sheet chainflex CFSOFT1
to 5 x d Highly flexible, soft design PVC outer jacket Oil-resistant Flame retardant 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Core insulation: Mechanically high-quality TPE mixture
More informationSystem Date of Issue Bulletin Number Bulletin Type. Title: Elimination of AC Connectors J29a and J29b
System Date of Issue Bulletin Number Bulletin Type Odyne System G2V2 2/4/15 Rev. 10/6/15 00020 Field Service Action Technical Service Bulletin Technical Service Advisory Title: Elimination of AC Connectors
More informationOur Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
More informationWhite paper. SACE Tmax XT Circuit-Breaker Terminals and Connection
White paper SACE Tmax XT Circuit-Breaker Terminals and Connection Circuit-Breaker Terminals and Connections Index Introduction... 2 1. Components used for wiring... 3 1.1. Electrical...3 1.2. Flexibility
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationPneumatic Tools for Professionals: Grinding Spindles and Robot Tools
5 Pneumatic Tools for Professionals: Grindin Spindles and Robot Tools BIAX pneumatic tools only the best is ood enouh for manufacturin your quality products! BIAX over 75 years of quality. Schmid & Wezel
More informationJUL 17 Rev M
Hand Crimping Tool and Cable Preparation Kit; PN 59981-1 Instruction Sheet 408-6788 24 JUL 17 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
More informationData sheet chainflex CF210.UL
For detailed overview please see design table 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic
More informationTools & Supplies. Phillips. Combo Head. Slotted. Square. Double Ended Customer Assistance
Tools & Supplies Combo Head Patented design tip fits most combination screws Phillips All bits 100% Made in the U.S.A.! Industrial Bits B-46 Slotted Combo Drive #2, 1 in. Insert Bit (Carded) 78-0105 Combo
More informationMotor starters up to 150 A
Contents Motor starters up to 50 A TeSys GV, GV3 and GV7 motor circuit-breakers b Thermal-manetic circuit-breakers Selection uide.............................................. pae 30 v Presentation.............................................
More informationMY F150 CrewCab 1. Tools Required E F G. Page 1 of 10 9L3J-19A014-AA Copyright Ford 2013 FoMoCo
2009-2014MY F150 CrewCab 1 Tools Required A B C D 3X E F G H 2X I 6X 3X Page 1 of 10 9L3J-19A014-AA Copyright Ford 2013 FoMoCo 2009-2014MY F150 CrewCab 2 Subwoofer Power Wire Routing All Vehicles WARNING:
More informationC Power Connection Kit
1548-4000C Power Connection Kit For use with Dekoron 2700 Family of Heating Cables Installation Instructions Kit Description The Dekoron 1548-4000C electrical connection kit distirbuted by Heat-Line is
More informationIdentification Type SU+M(C)P SE(4G1,5+(2 0,75)+(2 AWG22))UL 1KV OR. Part-No
PUR servo cables C-track compatible shielded Subject to technical modification 111600 Identification Type SU+M(C)P SE(4G1,5+(2 0,75)+(2 AWG22))UL 1KV OR Use/Application/Properties Application Combined
More informationR i g P o w e r M C C - 1 S e r i e s
R i P o w e r M C C - 1 S e r i e s Rated Up to 1,135 Amps @ 1,000 Volts AC/DC IP68 Inress Protection and with Delue Protection up to DTS01:91 Utilizes Number 24 Shell Also available in an Explosion Proof
More informationStahlwille. Product Range
tahlwille Product ane 207 Brand tory A TADITION OF INNOVATION For over 50 years, the TAHWIE brand name has stood for a constant drive for perfection. The founder of the company, Eduard Wille, laid down
More informationMicrophone and Musical Instrument Cable Overview
B R I L L I A N C E B R O A D C A S T C A B L E S 19.3 Microphone and Musical Instruent Cable Overview Flexible Microphone Cables Belden icrophone cable is used for connecting low level icrophones or usical
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More informationConductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table)
Outer jacket: Pressure extruded PVC mixture Inner jacket: Pressure extruded, gusset filling PVC mixture Conductor: Fine-wire strand consisting of bare copper wires 6 1 Core insulation: Mechanically highquality
More informationApplication Tooling Specification
Order No. 200218-0400 Application Tooling Specification Type 4A FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles
More informationInstallation Instructions
Equipment Required: Installation Instructions Fastener Kit: F Wrenches: 8mm, 13mm, 3/4, 15/16 Drill Bits: 1/4 Other Tools: Drill, Reciprocating Saw, File WARNING: Under no circumstances do we recommend
More informationMarlon 350A Auto Crimper
Marlon 350A Auto Crimper Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com MARLON 350A AUTO CRIMPER OPERATORS MANUAL INTRODUCTION Your new Marlon 350 Auto Crimper is
More informationFerrites and accessories
Ferrites and accessories Toroids R 2.5 to R 202 Series/Type: B64290 Date: June 2013 Data Sheet EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet and the information contained
More informationConnecting Tips. Insulation Displacement Connectors
Insulation Displacement Connectors and Tools IDC for Electrical Applications The latest series of Scotchlok Insulation Displacement Connectors (IDCs) have kept all that was good about the original connectorthe
More informationPrecision Cable & Wire Stripping Tools. Quality made in Germany
Precision Cable & Wire Stripping Tools Quality made in Germany 2 About us DAS ORIGINAL Market Leader for Cable Stripping and Dismantling Technology The JOKARI-Krampe GmbH is a leading manufacturer in the
More information