Switches 10AX/16AX. Safety. Easy Operation. Switch Mechanism. Characteristics of Urea Resin. Screwless Terminal (reduces installation work) Features

Size: px

Start display at page:

Download "Switches 10AX/16AX. Safety. Easy Operation. Switch Mechanism. Characteristics of Urea Resin. Screwless Terminal (reduces installation work) Features"

Coral Barrett
6 years ago
Views:

Screwless (reduces installation work) All

(double contact point structure) Flexible

3 FLATIMA SERIES Switches 0AX/6AX Way Switch Intermediate Switch Push Button Safety PBT Resin Silver Alloy Contact Superior Arc Resistance and Anti-Deposition Properties Spring with Double Contact Points Plate High-Conductivity Material WTFBP55S- WTFBP55S- WTFBP500S- WTFBP5S- *Push On/Off Switches. Urea Resin Characteristics of Urea Resin P ASSIV INFRARED R SENSOR AUTOMATIC A T TIMWITCH Standards Comply with IEC6066- Rating 6AX 50V~ (way switch) 0AX 50V~ (intermediate, Push button) Ambient Temperature -0 C - +0 C Representative Performance Electric strength :,000V min Operation test : 0,000 Operations Temperature rise : Test current A (.5 mm ) 7.5A (.5 mm ) * 0AX switch Not more than 5K (s) Screwless (reduces installation work) All wire, and - AWG wires can be connected directly. Quick Connect significantly reduces connection time, compared to screw terminals. Screw terminal : 0-0 seconds Quick Connect : second Wire connection can be uniformly performed regardless of operator skill level. Wires do not loosen even after a long usage. (double contact point structure) Flexible Conductor Stranded Conductor Solid Conductor Quick Connect (Screwless ).5 mm -.5 mm AWG - AWG Capacity.5 mm.5 mm AWG AWG *Supply terminal (way, Push Button) has terminal holes. 0-0 seconds second Excellent Arc resistance, Arc tracking resistance, Flame retardance, Heat resistance Color fastness. Has good electrical performance and mechanical strength with excellent abrasion resistance. Difficult to scratch, and there is virtually no adherence of dust due to static electricity. Organic solvents and oily substances cannot permeate. Enclosure Material Characteristics (reference) Urea PBT Polycarbonate Tracking Performance Excellent Good Poor Heat Deformation Good Good Fair Self-Extinguishment Good Good Good Easy Operation Large control surface requires only a light push to switch On/Off. Sliding Cam Sliding cam mechanism makes light-push On/Off switching possible. Switch Mechanism Panasonic proprietary Push On/Off mechanism used. Switch automatically returns to original horizontal position after pushing. AUTOMATIC A T TIMWITCH P ASSIV INFRARED R SENSOR S 7 75

FLATIMA SERIES Way Switch Intermediate Switch Push Button Switches 0A WTFBP557S-.. DP Switch with Indicator... *BS-Type : M.5 mounting screws included.

4 FLATIMA SERIES Way Switch Intermediate Switch Push Button Switches 0A WTFBP557S-.. DP Switch with Indicator... *BS-Type : M.5 mounting screws included. P ASSIV INFRARED R SENSOR AUTOMATIC A T TIMWITCH In Case Frame Removed When the frames are removed, they will become flash plate height to 7mm higher and depth of device to mm deeper excepting Socket Outlet(,-Gang), Dimmer Switch and Cable Outlet(0A, 5A). Applicable Box Box : 7 x 7 mm Fixing Center : mm Box's depth : 5 mm or more mm or more (Intermediate) 5. 7 Frame Standards Comply with IEC6066- Rating 0A 50V~ Ambient Temperature -0 C - +0 C Representative Performance Electric strength :,000V min Operation test : 0,000 Operations Temperature rise : Test current 5A ( mm ) Not more than 5K (s) Pillar.5 mm - 6 mm AWG - 0 AWG Capacity.5 mm mm 6 mm High rating silver contact for extended service life. Made with flame-retardant and heat-resistant urea resin. Conductive section uses heat-resistant copper with superior anticorrosion property and conductivity for long-term stable, reliable performance. Accepts wires :.5 mm - 6 mm solid wire and flexible wire. Built-in lighted indicator shows On/Off status. DP Switch with Indicator AUTOMATIC A T TIMWITCH P ASSIV INFRARED R SENSOR S * : M.5 mounting screws included

FLATIMA SERIES FLATIMA SERIES Socket Outlets Accessories - Television Switched Socket DIN Type F Type WTFBPS- WTFBPS- WTFBP50S- WTFBP7S- Technical specifications P ASSIV INFRARED R SENSOR AUTOMATIC A

6 FLATIMA SERIES FLATIMA SERIES Socket Outlets Accessories - Television Switched Socket DIN Type F Type WTFBPS- WTFBPS- WTFBP50S- WTFBP7S- Technical specifications P ASSIV INFRARED R SENSOR AUTOMATIC A T TIMWITCH Standards Comply with BS6- Rating A 50V~ Ambient Temperature -0 C - +0 C Representative Performance Electric strength :,000V min Operation test : 5,000 times (0,000 movements) Temperature rise : Test current 0A (.5 mm ) Not more than 5K (s) Pillar.5 mm - mm 5 AWG - AWG Capacity.5 mm.5 mm mm Socket Outlet with a double-pole switch completely isolates load from power supply. Socket Outlet housing uses flame-retardant and heat-resistant urea resin with high anti-tracking properties. Accepts wires :.5 mm - mm solid wire and flexible wire. Both socket and switch components have adequate switching capability. Included safety shutter prevents kids from tampering with switch. Switched Socket Applicable Box Plate : x mm Box : 7 x 7 mm Fixing Center : mm Plate : x 6 mm Box : 7 x mm Fixing Center : 0.6 mm WTFBP50S- Connector Type (Outlet) : DIN Type Screw (Only coaxial core isn't screw terminal type) Impedance Input, Outlet : 75Ω Applicable Cable Coaxial Cable Characteristic Impedance 75Ω type : 5C-V, C-V Insertion hole Connector Type (Outlet) : F Type Screw (Only coaxial core isn't screw terminal type) Impedance Input, Outlet : 75Ω Applicable Cable Coaxial Cable Characteristic Impedance 75Ω type : S-5C-FB "Easy Connect" terminal for direct insertion of coaxial cable core. Insert fully and tighten clamp. WTFBP50S- DIN Type core Insert the core of the cable as far as possible. Prepare the end of the cable so as not to damage the core. Bend back. Tighten the clamp. Bend. Check that it is fully inserted to the end. F Type WTFBP7S- WTFBP7S- Applicable cable S-5C-FB 0mm mm mm Core wire insertion hole Toward top of unit. Insert the core wire up to the insulation. Be careful. Not to damage core wire. While stripping insulation. Tighten the screw of clamp with a screwdriver AUTOMATIC A T TIMWITCH P ASSIV INFRARED R SENSOR S * : M.5 mounting screws included. * : M.5 mounting screws included. 80 8

FLATIMA SERIES FLATIMA SERIES Accessories - Telephone Accessories - LAN 6PC Category 6 WTFBP6S- WTFBP8S- P ASSIV INFRARED R SENSOR AUTOMATIC A T TIMWITCH Connector Type

: Core wire to be 0. mm, 0.5 mm, 0.65 mm, in diameter (solid copper only) -pair Business-phone indoor cable : Core wire to be 0. mm, 0.5 mm, 0.65 mm, in diameter (solid copper only) Quick Connect increases connection reliability.

Easy Cable Disconnection Push removal button while pulling out cable.

: Solid copper wire, AWG - AWG (diameter : 0.5 mm-0.65 mm) 6PC Category 6 It s not necessary to use special wiring tool. No need to untwist the wires.

Impact tool) Excess wires can be cut with the blade edge of the tool 6 A B AB8 7 5 7.5 0 Projection between the slots No need to untwist the wires to setting on the slots.

7 FLATIMA SERIES FLATIMA SERIES Accessories - Telephone Accessories - LAN 6PC Category 6 WTFBP6S- WTFBP8S- P ASSIV INFRARED R SENSOR AUTOMATIC A T TIMWITCH Connector Type Miniature Modular Jack, 6 position with -contacts, specified in TIA-06-A (Previously in FCC part 68) Quick Connect (Screwless Connection) Paired quad-type PVC indoor cable : Core wire to be 0. mm, 0.5 mm, 0.65 mm, in diameter (solid copper only) -pair Business-phone indoor cable : Core wire to be 0. mm, 0.5 mm, 0.65 mm, in diameter (solid copper only) Quick Connect increases connection reliability. Quick Connect for easy connection. * : M.5 mounting screws included Simple Connection Just insert cable into the terminal hole. Easy Cable Disconnection Push removal button while pulling out cable. Pull out Connector Type "8-way unshielded fixed connector (miniature 8-position modular jack)" specified in IEC IDC connection -pair UTP cable, Category 6 Conductor : Solid copper wire, AWG - AWG (diameter : 0.5 mm-0.65 mm) 6PC Category 6 It s not necessary to use special wiring tool. No need to untwist the wires. Toolless Cut the excess wires with nippers after connection -way connection * : M.5 mounting screws included. Using wiring tool Wiring tool (D.Impact tool) Excess wires can be cut with the blade edge of the tool 6 A B AB Projection between the slots No need to untwist the wires to setting on the slots. Minimum untwisting retains uniform installation quality and transmission performance. Pin/Pair assignment T568A Pair Pair Pair Pair T568B(Optionnal) Pair Pair Pair Pair Color W/BL BL W/O O W/G G W/BR BR T568A Pair Pin No. T568B AUTOMATIC A T TIMWITCH P ASSIV INFRARED R SENSOR S 8 8

MINIATURE CIRCUIT BREAKER

Technical Article MINIATURE CIRCUIT BREAKER T 146 PURCHASE he Spaceage MCB protects wires and cables automatically against overload and short-circuits in domestic, commercial and industrial installations.