SBT SPHERICAL SELF-LUBRICATING WIDE Materials
|
|
|
- Augustus Hopkins
- 6 years ago
- Views:
Transcription
1 PHERICAL BEARING ELF-LUBRICATING BT PHERICAL ELF-LUBRICATING WIDE RACE BALL LINER 41 tainless teel / Heat Treated 44C tainless teel / Heat Treated Teflon / Fabric MINEBEA No Rotational H α φo tatic Limit Dynamic Breakaway Torque Part No. ±.13 (de.) N m tandard Axial BT ~ BT {.6 ~ 5.8kf cm} BT BT BT ~.57 BT {1.2 ~ 5.8kf cm} BT BT BT BT ~.9 BT {2.3 ~ 9.2kf cm} BT BT ~ BT {3.4 ~ 17.3kf cm} Teflon liner permanently bonded to race I.D. 2. Made to order only. 3. No Rotational Breakaway Torque. Low Torque All ize:.2n m MAX ( Clearance.5mm MAX) Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 Tolerance +1 Pae 34 Copyriht 26, Minebea Co., Ltd.
2 PHERICAL BEARING ELF-LUBRICATING MBT,MBT-V PHERICAL ELF-LUBRICATING NARROW RACE 41 tainless teel / Heat Treated BALL 44C tainless teel / Heat Treated LINER Teflon / Fabric H α φo ±.13 (de.) No Rotational Breakaway Torque N m tandard -.25 takin Groove X -.25 R -.25 P -.4 tatic Limit Axial MBT3/MBT3V MBT4/MBT4V MBT5/MBT5V MBT6/MBT6V MBT8/MBT8V MBT1/MBT1V ~ MBT12/MBT12V {1.2 ~5.8kf cm} MBT14/MBT14V MBT15/MBT15V MBT16/MBT16V MBT18/MBT18V MBT2/MBT2V MBT22/MBT22V MBT25/MBT25V ~ MBT28/MBT28V {2.3 ~9.2kf cm} MBT3/MBT3V Teflon liner permanently bonded to race I.D. 2. MBT & MBT-V weihts are similar. 3. Made to order only. 4. No Rotational Breakaway Torque. Low Torque All ize:.2n m MAX ( Clearance.5mm MAX) Bore size ~3 ~6 ~1 ~18 ~3 Dynamic Tolerance +1 Copyriht 26, Minebea Co., Ltd. Pae 35
3 PHERICAL BEARING ELF-LUBRICATING MBWT,MBWT-V PHERICAL ELF-LUBRICATING WIDE RACE 41 tainless teel / Heat Treated BALL 44C tainless teel / Heat Treated LINER Teflon / Fabric H α ±.13 (de.) φo No Rotational Breakaway Torque N m tandard -.25 takin Groove X -.25 R -.25 P -.4 tatic Limit Axial.6 ~.57 MBWT5/MBWT5V {.6 ~ 5.8kf cm} MBWT6/MBWT6V 6 13 MBWT8/MBWT8V MBWT1/MBWT1V MBWT12/MBWT12V ~ MBWT14/MBWT14V {1.2 ~ 5.8kf cm} MBWT15/MBWT15V MBWT16/MBWT16V MBWT18/MBWT18V MBWT2/MBWT2V MBWT22/MBWT22V MBWT25/MBWT25V ~ MBWT28/MBWT28V {2.3 ~ 9.2kf cm} MBWT3/MBWT3V MBWT35/MBWT35V MBWT4/MBWT4V ~ MBWT45/MBWT45V {3.4 ~ 17.3kf cm} MBWT5/MBWT5V Teflon liner permanently bonded to race I.D. 2. MBWT & MBWT-V weihts are similar. 3. Made to order only. 4. No Rotational Breakaway Torque. Low Torque All ize:.2n m MAX ( Clearance.5mm MAX) Dynamic Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 ~ 5 Tolerance Pae 36 Copyriht 26, Minebea Co., Ltd.
4 PHERICAL BEARING ELF-LUBRICATING MBYT,MBYT-V PHERICAL RACE BALL LINER ELF- LUBRICATING 41 tainless teel / Heat Treated 44C tainless teel / Heat Treated Teflon / Fabric HIGH MIALIGNMENT H α ±.13 (de.) φo No Rotational Breakaway Torque Chamfer N m tandard C ± takin Groove X -.25 R -.25 P -.4 tatic Limit Axial.6 ~.57 MBYT5/MBYT5V {.6 ~ 5.8kf cm} MBYT6/MBYT6V MBYT8/MBYT8V MBYT1/MBYT1V MBYT12/MBYT12V ~ MBYT14/MBYT14V {1.2 ~ 5.8kf cm} MBYT15/MBYT15V MBYT16/MBYT16V MBYT18/MBYT18V MBYT2/MBYT2V ~ MBYT22/MBYT22V {2.3 ~ 9.2kf cm} Teflon liner permanently bonded to race I.D. 2. MBYT & MBYT-V weihts are similar. 3. Made to order only. 4. No Rotational Breakaway Torque. Low Torque All ize:.2n m MAX ( Clearance.5mm MAX) Dynamic Bore size ~3 ~6 ~1 ~18 ~3 Tolerance +1 Copyriht 26, Minebea Co., Ltd. Pae 37
5 PHERICAL BEARING METAL TO METAL MBG-CR,MBG-VCR PHERICAL METAL TO METAL TANDARD RACE 41 tainless teel BALL 44C tainless teel takin Groove tatic Limit H α φo X R P ±.13 (de.) Axial MBG3CR/MBG3VCR MBG4CR/MBG4VCR MBG5CR/MBG5VCR MBG6CR/MBG6VCR MBG8CR/MBG8VCR MBG1CR/MBG1VCR MBG12CR/MBG12VCR MBG14CR/MBG14VCR MBG15CR/MBG15VCR MBG16CR/MBG16VCR MBG18CR/MBG18VCR MBG2CR/MBG2VCR MBG22CR/MBG22VCR MBG25CR/MBG25VCR MBG28CR/MBG28VCR MBG3CR/MBG3VCR MBG - CR & MBG - VCR weihts are similar. 2. Made to order only. 3. Clearance All ize:.51mm MAX Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 Tolerance +1 Pae 38 Copyriht 26, Minebea Co., Ltd.
6 PHERICAL BEARING METAL TO METAL MBW-CR,MBW-VCR PHERICAL METAL TO METAL WIDE RACE 41 tainless teel BALL 44C tainless teel φd -.13 W -.13 H ±.13 α (de.) φo -.25 takin Groove X -.25 R -.25 P -.4 tatic Limit MBW5CR/MBW5VCR MBW6CR/MBW6VCR MBW8CR/MBW8VCR MBW1CR/MBW1VCR MBW12CR/MBW12VCR MBW14CR/MBW14VCR MBW15CR/MBW15VCR MBW16CR/MBW16VCR MBW18CR/MBW18VCR MBW2CR/MBW2VCR MBW22CR/MBW22VCR MBW25CR/MBW25VCR MBW28CR/MBW28VCR MBW3CR/MBW3VCR MBW - CR & MBW - VCR weihts are similar. 2. Made to order only. (3) For below 4mm in Bore size, bearins are without lubrication rooves. 4. Clearance All ize:.51mm MAX Axial Bore size ~3 ~6 ~1 ~18 ~3 Tolerance +1 Copyriht 26, Minebea Co., Ltd. Pae 39
7 PHERICAL BEARING METAL TO METAL MBY-CR,MBY-VCR PHERICAL METAL TO METAL RACE 41 tainless teel BALL 44C tainless teel HIGH MIALIGNMENT φd -.13 W -.13 H ±.13 α (de.) φo Chamfer C ± takin Groove tatic Limit X R P Axial MBY3CR MBY4CR MBY5CR/MBY5VCR MBY6CR/MBY6VCR MBY8CR/MBY8VCR MBY1CR/MBY1VCR MBY12CR/MBY12VCR MBY14CR/MBY14VCR MBY15CR/MBY15VCR MBY16CR/MBY16VCR MBY18CR/MBY18VCR MBY2CR/MBY2VCR MBY22CR/MBY22VCR MBY - CR & MBY - VCR weihts are similar. 2. Made to order only. (3) For below 4mm in Bore size, bearins are without lubrication rooves. 4. Clearance All ize:.51mm MAX Bore size ~ 3 ~ 6 ~ 1 ~ 18 ~ 3 Tolerance +1 Pae 4 Copyriht 26, Minebea Co., Ltd.
8 PHERICAL BEARING MOLD TYPE BM PHERICAL MOLD TYPE MINELON RACE Bearin teel / Heat Treated / Black Oxide Treated BALL Bearin teel / Heat Treated / Chrome Plated MOULDED LINER Minelon MINEBEA W H φo R1 Part φd No. ± BM R2 α ±.2 (de.) No Rotational Breakaway Torque N m Clearance mm tatic Limit Axial tatic Limit Dynamic MAX.3MAX BM {.35kf cmmax} BM MAX BM {.58kf cmmax} BM MAX MAX BM {1.15kf cmmax} 1 Operatin temperature rane: - 5 ~+ 1 2 Dynamic Ratins: Cd 1. Reversin & Alternatin Dynamic Ratins shall be reduced by half from the values iven in the table under the use of reversin and alternatin load condition. 2. Factor of Operatin Temperature and lidin peed Dynamic Ratins shall be determined by formula below under the use of Hih-Temperature and lidin-peed condition. Cdt v=ft fv Cd Cdt v: Dynamic Ratins under the use of Hih- Temperature and lidin speed. ft: Coefficient of Temperature fv: Coefficient of lidin speed Table 1 Temp. ~ 4 ~ 6 ~ 8 ~ 1 ft Table 2 lidin peed m/min ~.3 ~.4 ~.5 ~.6 ~.7 ~.8 ~.9 ~ 1.1 ~ 1.5 ~ 2.5 fv tatic Ratins: Cs 1. Dynamic Ratins shall be reduced to one-thirds of the values iven in the table under the use of that Hih- will be applied continiously or periodically and be reduced to one-sixth of the values iven under Reversin and Alternatin and Impact conditions. 2. Factor of Operatin Temperature Dynamic Ratins shall be determined by formula below under the use of Hih-Temperature conditions. Cs t=ft Cs Cs t: Dynamic Ratins under the use of Hih- Temperature condition. ft: Coefficient of Temperature Cs: tatic iven in the table Table 3 Temp. ~3 ~4 ~6 ~8 ~9 ~1 ft Thrust : Pt Please use thrust load in the rane, which does not exceed the thrust load (Table 1 application under temperature environment) from cataloue, and 1/3 of Actual radial. Please consult MINEBEA for availability of bearins in this series. Tolerances Measure rane Ball permitted tolerances Race permitted tolerances permitted tolerances of Ball width permitted tolerances of Race width Bm B Dm D W H Over Under Upper Lower Upper Lower Upper Lower Upper Lower Upper Lower Upper Lower Bm & Dm indicate averaes of I.D. & O.D.. Copyriht 26, Minebea Co., Ltd. Pae 41
RBT3E M RBT4E M
2 PIECE ROD END BEARING SELF-LUBRICATING RBT-E e.com ROD END MALE LINER 33 Stainless Steel 44C Stainless Steel Teflon / Fabric SELF- LUBRICATING 2 PIECE H F TH L α φo SφDB Limit eiht H7 ±.5 ±.3 ±.5 JIS
SECTION 2. SPHERICAL BEARINGS Metal-to-Metal
ECIN 2 HERICAL EARING Metal-to-Metal A81936 eryllium Copper all.....................................14 MIL--8976 (proposed as A8976) Narrow...........................16 Narrow...........................................................18
BEARING Polyester Fabric, Rod and Piston and Coil
ØD ØD 3 Ød 1 Ød Ød 3 ØD 1 506 BEARIN Polyester Fabric, Rod and Piston and Coil DEIN The Hallite 506 bearing strip is designed to provide an extremely effective, hard wearing, and easy-to-use bearing solution
ROD ENDS AND SPHERICAL BEARINGS
144 ROD ENDS AND SPHERICAL BEARINGS SEALMASTER Bearings entered the rod end and spherical plain bearing market in 1956 providing customers a broad product line offering for over 40 years. The product was
G max rad Ød 2 Ød 3 ØD to to to to
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
Design. Dynamic Sealing Face Ød1,ØD max Static Sealing Face Ød2,ØD2, L1 3.2 max 16 max 125 max 140 max
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
Long-Life Self-Lubricating Spherical Bearings
Long-Life Self-Lubricating Spherical Bearings ASTRO Division Introduction Long-Life Self-Lubricating Spherical Bearings Featuring NHBB s MK Liner System Introducing the industry s first self-lubricating
RADIAL NEEDLE ROLLER AND CAGE ASSEMBLIES
RADIAL NEEDLE ROLLER AND CAGE AEMBLIE Technical features Radial needle roller and cage assemblies have a steel cage that provides both inward and outward retention for the needle rollers. The designs provide
Angular contact thrust ball bearings
Angular contact thrust ball bearings Angular contact thrust ball bearings, single direction, Ry type and angular contact thrust ball bearings, double direction, 2344 and 2347 types, have a large contact
RADIAL NEEDLE ROLLER AND CAGE ASSEMBLIES
RADIAL NEEDLE ROLLER AND CAGE AEMBLIE Technical features Radial needle roller and cage assemblies have a steel cage that provides both inward and outward retention for the needle rollers. The designs provide
Linear Bushings. Description of each series and Table of dimensions
Linear Bushins escription of each series and Table of dimensions Linear Bushin G Pae - to -9 Linear Bushin Pae - to -7 ompact Linear Bushin Pae -7 to -77 Miniature Linear Bushin Pae -7 to - In the table
FEROGLIDE. Self lubricating bearings TECHNICAL MANUAL
FEROGLIDE Self lubricating bearings TECHNICAL MANUAL www.tenmat.com Page 1 Issue 2 Contents Topic Page Operating Parameters 3 Bearing Load Limits 3 Bearing Wear 4 Velocity Limit 4 Pressure Velocity (PV)
Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
AEROSPACE BEARINGS. Plain Bearings. Self-Lubricated Journal Bearings Descriptions. Spherical Bearings Descriptions
Plain Bearings AEROSPACE BEARINGS Self-Lubricated Journal Bearings Descriptions Spherical Bearings Descriptions Self-Lubricated Rod Ends Descriptions SELF-LUBRICATED JOURNAL BEARINGS STRAIGHT ALUMINIUM
TECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
Introduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1
Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.
2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
Ball Screw Support Units. Outline. Compact Support Units. Variation
all Screw s Outline Variation Compact smsu seriesprovide 2 choices of ousin type, which are illow type and Flane type. Fixed side and supported side Units are standardized for each type. In case of illow
Thrust Needle Roller Bearings Thrust Roller Bearings. Structures of Thrust Bearings. Needle roller. Cage. Cylindrical roller. Cage.
eele Roller Bearins Roller Bearins Structure an Features Bearins consist of a precisely mae cae an rollers They have hih riiity an hih loa capacities an can be use in small spaces eele Roller Bearins incorporate
Bearings Ball Thrust Roller Thrust Special/Custom Stainless Steel
Bearings Ball Thrust Roller Thrust Special/Custom Stainless Steel 4 Route 350 Macedon, NY 14502 (3) 986-7600 phone (3) 986-8293 fax www.auburnbearing.com Made in USA The Auburn Advantage A Need Brought
Advantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings
Advantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings Advantages 1. Low starting and running friction except at very high speeds. 2. Ability to withstand momentary shock
Ball Valves. Features
Technical Information General Description eries BV3H and BV4H are true 3-way and 4-way high pressure valves, incorporating many of the advanced features of the 2-way product. These products come in steel
FAG Angular Contact Thrust Ball Bearings double direction
FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine
Basic Static Load Rating of Rolling Contact Bearings
Basic Static Load Rating of Rolling Contact Bearings The load carried by a non-rotating bearing is called a static load. The basic static load rating is defined as the static radial load (in case of radial
Plastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
High precision ball bearings
GMN Paul Müller Industrie GmbH & Co. KG Äussere Bayreuther Str. 230 D-90411 Nuremberg Phone: +49 911-5691-0 Fax: +49 911-5691-221 www.gmn.de High precision ball bearings Ball bearings: Phone: +49 911-56
Double-row ball bearings
Double-row ball bearings Radial double-row ball bearings 262 Definition and capabilities 262 Series 262 Tolerances and clearances 262 Design criteria 263 Suffixes 263 Characteristics 264 Radial double-row
RK Series. Introduction. Design Features. Availability. Applications
Introduction bearings have a flanged cross-sectione or both rings and range in size from 20 47 inches OD (500 1200 mm). The flanged design reduces weight and provides the equipment designer greater flexibility
Series AXS. Standard Type/Single Acting:Spring Return, Spring Extended. Bore Size(mm) : ф20, ф25, ф32, ф40. How to Order A - 68
tandard ype/ingle Acting:pring Return, pring Extended (mm) : ф2, ф25, ф32, ф4 AILE EEL BODY HIH CYCLE LIFE LOW BREAKAWAY UMEROU MOUI OPIO MAE ADARD FOR AUO WICH BUMPER ADARD DEIED FOR O-LUBRICAED ERVICE
Thrust ball bearings. - double direction
Thrust ball bearings Thrust ball bearings are manufactured in two versions: single and double direction. These bearings can carry single or double direction heavy axial loads. - single direction - double
FLANGED TYPE LINEAR BEARINGS
FLANED TYPE LINEAR BEARINS Inch and Metric Recirculating Ball SQUARE FLANE (SF) ROUND RANE (RF) Requires no housing, thus reducing costs Requires little installation space Ensures high accuracy upon replacement
RHN Series Electric Wire Rope Hoists
RHN Series Electric Wire Rope Hoists easy Maintenance control panel IP protection with modern controls. Components mounted on DIN rail. Equipped with main line contactor. adjustable Geared Limit switch
CYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG
CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in
DAIDYNE DDK05 DAIDYNE DDK05. Major Superior Points to Roller Bearing. Superior Points to Roller Bearing. Physical Characteristics
Major Superior Points to Roller Bearing bearing is free from the skew problem. bearing can also be used for sliding motion in the axial direction. bearing allows very compact equipment design that does
...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
Bearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
Heavy-Line. GU System
GU ystem Guide rails GU..M, GU..MT GU...MT 90 ± 0' G H c h g sm b + 0,05 D I I GU...M 90 ± 5' L 0,02 H c h b + 0,05 0, 0,02 The longitudinal slot, made with + 0.05 tolerance, permits using reference elements
General Purpose Clutches FSO/HPI
General Purpose Clutches FSO/HPI Overrunning, Indexing, Backstopping Ball Bearing Supported, Sprag Clutches Model FSO General purpose, ball-bearing clutches suitable for overrunning, backstopping and light
Bearing Fundamentals. Timken Training
Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction
Deep groove ball bearings L12DDU. Polyolefin is used for packaging food in supermarkets, replacing dioxin-generating vinyl chloride.
Bearings Environmentally friendly Bearings offer high performance in water- and dust-contaminated environments. Enhanced strength makes these ever-evolving bearings ideal for high-speed. Bearings 22311L12CAM
Linear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)
Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.
HOW BENDS ARE MEASURED EXAMPLES BEND INFORMATION. The degree of a bend may be measured with either a protractor or an angle finder.
HOW BENDS ARE MEASURED EXAMPLES The degree of a bend may be measured with either a protractor or an angle finder. 90 OBTUSE ANGLE 45 135 DEGREE OF BEND 45 A B 0 BEND INFORMATION 180 The bend radius is
Parallel Style Air Gripper
Parallel tyle Air Gripper eries MHZ MHZ MH -X D- Courtesy of teven Engineering, Inc.-3 Ryan Way, outh an Francisco, CA 98-37-Main Office: () 88-9-Outside Local Area: (8) 8-9-www.stevenengineering.com 373
Publication BCRKB.Rev00EN. RKB Europe SA 2018/07
BEARING CATALOGUE Publication BCRKB.Rev00EN RKB Europe SA 2018/07 Every care has been taken to ensure the accuracy of the information in the present document but no liability can be accepted fony errors,
Ball Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
OVERHAUL. 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance.
4168 OVERHAUL 410F701 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance. 0.10 to 0.40 mm (0.0039 to 0.0157 in.) 0.40 mm (0.0157 in.) C80538 2. INSPECT
America rolls on Kendale quality made in the U.S.A.
America rolls on Kendale quality made in the U.S.A. Kendale Industries, Inc. Auburn, Alabama Kendale Industries is a leading producer of semi-precision ball bearings and wheels for powered and gravity-type
Rod Ends and Spherical Plain Bearings
Rod Ends and Spherical Plain Bearins DIN EN ISO 91:2 Z.-Re.-Nr. 12 1 19654 TMS Introduction Rod Ends and Spherical Plain Bearins are assembled machine parts to DIN ISO 1224 (formerly DIN 648), ready for
Rod Ends and Spherical Plain Bearings
Rod Ends and Spherical Plain Bearins Introduction Rod Ends and Spherical Plain Bearins are assembled machine parts to DIN ISO 1224 (former DIN 648), ready for installation. They are used to uarantee the
10 Thrust ball bearings
Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing
MICROPOROUS POLYMERIC LUBRICANTS
MICROPOROUS POLYMERIC LUBRICANTS BY ALAN J. HECKLER J. INTRODUCTION The traditional method for lubricating ball and roller bearings is with grease and oils. These lubricants can be messy, causing significant
Ball Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
INDUSTRIALINE MOUNTED BEARINGS
INUTRIAIN OUNT ARIN ounted earing Features Index... -1 Features Index... -4 ngineering and election all earing Units... -6 100 eries Pillow locks... -8 100 eries Flange locks... -10 100 & 200 eries oad
SECTION 1. Basic Information
SECTION 1 SECTION 1 This section covers both the basic technical information governing bearing selection and the part numbering system used in this catalog. When the part numbering is different from the
Ball-Bearing Products
Ball-Bearing Products www.daytonlamina.com Check our website for the latest technical information. Ball-Bearing Components Contents Ball-Bearing Operating Data & Design Selection... 2 Ball-Bearing Component
Rolled Ball Screws RBS series (Normal, Medium, Large, Extra large Lead)
Rolled Ball Screws RBS series (Normal, Medium, Large, Extra large Lead) Series Normal and Medium Lead (φ8~φ40) RBSMA Series Large Lead l=d (φ10~φ40) RBSDA Series Extra large Lead l=2d (φ16~φ32) The method
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
contents Symbols and units in the catalog Engineering data
contents Symbols and units in the catalog Engineering data - 4 Deep groove ball bearings Series.. Series.. Series.. Series.. Series 3.. - Double-row angular contact ball bearings Series 3.. Series 33..
List Price. Part Number
162 style tp piston T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a standard o-ring groove. T-Seals are non-spiraling
*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings
Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.
Why bigger isn t always better: the case for thin section bearings
White Paper Why bigger isn t always better: the case for thin section bearings Richard Burgess, Les Miller and David VanLangevelde, Kaydon Bearings Typical applications Thin section bearings have proven
plastic universal joints and teleshafts
plastic universal joints and teleshafts Backlashfree up to 10 8 turns ow mass ow inertia Corrosion resistant Electrically isolating No maintenance HucoPol is a range of light duty, backlashfree universal
Mounting Overlap Shield. Face Clamps. Gap. Seat Depth. Lead In Chamfer. Loose Fit.
Mounting Introduction: Reali-Slim thin section ball bearings have a crosssection thickness that is much thinner than standard bearings of the same diameter, and are therefore more sensitive to shaft and
Technical Data Index
Technical Data Index Description Page Product Information 2-3 Specifications 4 Temperature Limits 4 Lubrication Grease 5 Dry Film 6 PTFE Liner 7 Bearing Misalignment 8 Suggested Housing Bores 9-11 Suggested
TECHNICAL INFORMATION
Ball Bearing Cages, Retainers, and Ball Separators The ball bearing cage (also known as a bearing retainer or ball separator used interchangeably), is the component in a ball bearing, that separates the
Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm
ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot
SPLIT MOUNTED HT750/H1000/NT600 INSTALLATION MANUAL
9/26/16 HIGH TEMP BEARINGS SPLIT MOUNTED HT750/H1000/NT600 INSTALLATION MANUAL www.hightempbearings.com HTB Split Mounted HT750/1000/NT600 Sleeve Bearings Installation HTB Manual REV A REV A Split Mounted
NSK Standard Ball Screws High Speed SS Series
NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard
I;! Anchor Lamina. l;! Lamina Components. Ball-Bearing Products. Check our website for the latest technical information.
I;! Anchor Lamina l;! Lamina Components Ball-Bearing Products www.anchorlamina.com Check our website for the latest technical information. Ball-Bearing Components CONTENTS Ball-Bearing Operating Data &
DESIGN ENGINEERS O-RING SIZE GUIDE
DESIGN ENGINEERS O-RING SIZE GUIDE INTRODUCTION: Substantially all O-ring manufacturers present their catalog data in the rotation of groupings or families of cross-sectional thickness first, then followed
M24X
Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:
M03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
MTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
MOUNTED HT750/H1000/NT600 INSTALLATION MANUAL
12/11/13 HIGH TEMP BEARINGS MOUNTED HT750/H1000/NT600 INSTALLATION MANUAL www.hightempbearings.com HTB Mounted HT750/1000/NT600 Sleeve Bearings Installation HTB Manual REV B REV B Mounted HT750/1000/ NT600
Kaydon white paper. The importance of properly mounting thin section bearings. an SKF Group brand. by Rob Roos, Senior Product Engineer
The importance of properly mounting thin section by Rob Roos, Senior Product Engineer an SKF Group brand Figure 1 Radial Load Reversing Thrust Overturning Moment Thin section ball have a much thinner cross-section
VERLON No Swell Wear Rings
VERLON No Swell Wear Rings Ultra precision +.001 tolerance on cross section NO SWELL - Lowest friction Strength to 40,000 PSI Large range of widths, cross sections and diameters - metric too Features &
What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features
ROLLERmANUAL Table of Contents What is BF? Tubes Sprockets Grooves Coatings & Platings Axles Axle Machining Bearings Roller Assembly Tapers Formed Tubes Special Features Applications Questions to Ask 2
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
Ball Valves. Features
Catalog HY14-252/U Technical Information eries V3D General Description eries V3D is a 3-way diverter. The product is rated at 27 ar (3 PI) and designed to economically satisfy many 3-way applications.
Bearing Solutions for the Agriculture Industry
INTERNATIONAL GROUP Bearing Solutions for the Agriculture Industry with RBI s RuggedSeal Technology Keeping the world in motion >> 1-800-708-2128 l www.rbibearing.com l www.rbinternationalgroup.com TOUGH
Parallel Type Air Gripper
Parallel Type Air Gripper MHZ eries ø, ø1, ø1, ø2, ø2, ø32, ø MHZ MHF MHL MHR MHK MH MHC MHT MHY MHW -X MRHQ MA D- 381 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic
Selecting the correct lubricant for element bearings
BEST PRaCTiCES Mike Johnson / Contributing Editor Selecting the correct lubricant for element bearings These simple but dependable guidelines allow you to choose lubricants that support long-term, reliable
xirodur B180 Axial Ball Bearings Product Range
axial ball bearing xirodur B180 xial Ball Bearings Product Range Order key BB-510-B180-ES stainless steel balls glass balls GL = glass ES = stainless steel Material xirodur B180 Dimensions acc. to DIN
WBK 08 S - 01 A WBK 25 DF - 31H. Accessories. (For light load) (For high speed and heavy load) 3. Reference number coding
3. Reference number coding (For light load) xample: Product code for support unit ominal size code * WK 8 S - 1 ounting code o code: Fixed support unit S: Simple support unit SF: Simple support unit (for
B E A R I N G S A N D C OM P O N E N T S
Issue Feb 2017 B E A R I N G S A N D C OM P O N E N T S See also: Bowman Sintered Bearings Catalogue Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail sales@bowman.co.uk Contents Page Company Profile
PROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS Table of Contents HUBS Gear, Dial and Sprocket Assembies - Tech Info.....MI 2 Phase Adjustable Hub........................MI 3 Quick-2-Lock Hub..........................MI
ISSUE 1/08/14 B E A R I N G S A N D C O M P O N E N T S Contents Company Profile Products Wrapped Bearings Technical Information WMU & WMXMU & WMX Wrapped Bearings Metric Plain U Type Wrapped Bearings
CLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
Combined Bearing/Freewheel CSK CSK..2RS
Combined Bearing/Freewheel CSK CSK..2RS TYPE CSK CSK..2RS T ype CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease
Short Stroke Transducer potentiometric 10 mm up to 150 mm. Series T / TS Series TR / TRS
Short Stroke Transducer potentiometric 10 mm up to 150 mm Series T / TS Series TR / TRS Compact transducer with proven conductive-plastic technoloy. The model with push rod and ball couplin enables a backlashand
FLURO-Gelenklager GmbH ROD ENDS AND SPHERICAL PLAIN BEARINGS FOR MOTOR SPORT
ROD ENDS AND SPHERICAL PLAIN BEARINGS FOR MOTOR SPORT Introduction The FLURO production program consists of Rod Ends to DIN ISO 1224-4 and Spherical Plain Bearings to DIN ISO 1224-1, Series K and E. Stainless
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
RFC SPECIALTY LOCKING DEVICES
RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
ANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
MARYLAND METRICS. ROD ENDS AND SPHERICAL PLAIN BEARINGS FOR MOTOR SPORT are available from: FLURO-Gelenklager GmbH
ROD ENDS AND SPHERICAL PLAIN BEARINGS FOR MOTOR SPORT are available from: MARYLAND METRICS products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (41)358-313 (8)638-183
Central Hydraulics, Inc. Stocking Distributor for White Hydraulic motors
whitedriveproducts PI444200 Rev. 2.06 SERVICE INSTRUCTIONS FOR THE CE [400 & 401] SERIES MOTORS For Use With Seal Kit: 400444200 dimensions: mm [in] A) B) C) Remove all shaft components from the shaft,
DryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant