Ball Valves. Quality Valves at Low Cost

Transcription

1 Ball Valves Quality Valves at Low Cost

2 Full Port way Flanged SS L/T Port

3 PRESSURE RATING: WOG = Size = / = / 5 = / 7 = / = = ¼ 5 = ½ = 5 = ½ = = = Valve Series B = PC, WOG, SS B = PC, / WOG, SS B = PC, WOG, SS, Direct Mount B = PC, WOG, SS, Screwed Ends BS = PC, WOG, SS, Socket Weld Ends B5 = PC, WOG, SS, Direct Mount, Screwed Ends B5S = PC, WOG, SS, Direct Mount, Socket Weld Ends B5TC = PC, WOG, SS, Direct Mount, TriClamps Ends B5TO = PC, WOG, SS, Direct Mount, Tube Ends B = PC, PSI, Carbon Steel/Bar Stock B7L = PC, WOG, SS, way, LPort B7T = PC, WOG, SS, way, TPort B = PC, / WOG, Carbon Steel BT = PC, PSI, Carbon Steel BT = PC, PSI, Carbon Steel TFP= PC, WOG, Brass, Threaded Ends SFP= PC, WOG, Brass, Solder Ends TFP Construction Forged brass body Full port Durable chrome plated brass ball Viton O Rg and PTFE Packg Stem threaded packg nut Blow out proof stem MSS SP standards SFP BODY END CAP SEAT BALL 5 STEM THRUST WASHER 7 STEM PACKING GLAND HANDLE NUT PART MATERIALS LIST SPECIFICATION FORGED BRASS ASTM B C7 FORGED BRASS ASTM B C7 PTFE BRASS ASTM B C/B C7 BRASS ASTM B C PTFE PTFE PTFE BRASS ASTM B C STEEL SIZE (IN) L D H W /...5. / / / / Design Criteria, Trim and dra PSI Compressed Gas Shutoff valves PSI Flaable Liquid Shut off Valves PSI Gas Shut off valves LP gas shut off valves Manual valves MATERIALS LIST PART SPECIFICATION BODY FORGED BRASS ASTM B C7 END CAP** FORGED BRASS ASTM B C7 SEAT PTFE BALL BRASS ASTM B C/B C7 STEM BRASS ASTM B C THRUST WASHER STEM PACKING PTFE PTFE GLAND PTFE HANDLE NUT BRASS ASTM B C STEEL Patented "Raised V" design negates body jot leakage.

4 B Size dia () /. /.5 / 5 / 5 ¼ ½ L H W S S X N P BL / 5/ 5/ / 7/ 7/ / / (lbs) CV Factor Kg PRESSURE PSI PRESSURETEMPERATURE RATING / / ~ of oc TEMPERATURE PRESSURE BAR B Size / / / / ¼ ½ dia () L H W X BL / 5/ 5/ / 7/ 7/ / / CV Factor (lbs) Kg PRESSURE PSI PRESSURETEMPERATURE RATING / / ~ of PRESSURE BAR.5 5 / oc TEMPERATURE

5 PC Full Port SS Ball Valve Direct Mount Pressure Ratg: psi ( bar) WOG for / to / See Page for Actuation B Investment cast body and ends Blowout proof stem Full port Direct mountg pad for ISO Std 5 FNPT threaded on both ends Material: ASTM A5CFM (SS) NACE MR5 Size () dia L F M / / ½ ISO 5 F F5 F5 F5 F7 F5 F7 F7 F7 F (lbs) 5 5 D H D S A CV Factor Kg No. Part Material. Body... ASTMA5 Gr. CFM. Ends... ASTMA5 Gr. CFM. Ball... ASTMA5 Gr. CFM. Stem...SS 5. Ball Seat...5% RTFE. Gasket...5% RTFE 7. Stem Packg...5% RTFE. Thrust Washer...5% RTFE. Stem Packg...SS. Belleville Washer...SUS USP. Thrust Washer... PTFE +5% Carbon. ORg... Viton. Lockg Washer...SS. Stem Nut...SS 5. Handle...SS. Handle Nut...SS. Handle Cover... Vyl Grip PRESSURE PSI PRESSURETEMPERATURE RATING / ½ ~ of PRESSURE BAR Sizes and specifications shown are subject to change without notice. PC Full Port SS PSI Ball Valve Pressure Ratg: psi ( bar) WOG for / to B BS Investment cast body and ends Blowout proof stem Full port FNPT threaded on both ends for B Socket weld on both ends for BS Lockg handle Material: ASTM A5 CFM (SS) Size / / / / ¼ ½ ½ dia () L H W B D S CV Factor 5 Kg No. Part (Qty) Material. Body ()... ASTMCFMA5. End ()... ASTMCFMA5. Ball ()... ASTMCFMA5. Ball Seat ()... 5% RTFE 5. Jot Gasket ()... 5% RTFE. Stem ()...AISI 7. Thrust Washer ()...PTFE. Stem Packg ()...PTFE. Gland Nut ()...AISI. Handle ()...AISI. Stem Washer ()...AISI. Stem Nut ()...AISI. Handle Sleeve ()...Vyl Grip. Lock Device ()...AISI 5. Bolt ()...AISI. Sprg Washer ()...AISI. Hex Nut ()...AISI PRESSURE PSI PRESSURETEMPERATURE RATING / / ~ of oc TEMPERATURE oc TEMPERATURE PRESSURE BAR

6 PC Full Port SS Ball Valve Direct Mount Pressure Ratg: psi ( bar) WOG for / to / See Page for Actuation Threaded (B5), Socket Weld (B5S) and TriClamp (B5TC) Ends High Cycle, Live Loaded, Triple Stem Seal comprised of:» Carbon filled PTFE wedge rg thrust washer and Viton ORg» 5% RTFE Chevron packg» Live loaded Belleville washers» Packg nut mechanically locked to stem Investment cast body and ends Blowout proof stem Full port Lockg Handle Direct mountg pad for ISO Std 5 FNPT threaded on both ends on B5 Socket weld ends on B5S Material: ASTM A5CFM (SS) and LSS ends on socket weld PRESSURE PSI PRESSURETEMPERATURE RATING / / ~ PRESSURE BAR of B5TC B5 B5S oc TEMPERATURE Size d L F M ISO 5 (lbs) D H D S A CV Factor Kg / / ½ F F5 ( 5 ) F5 F7 ( bs) F5 F7 F5 F7 F7 F F F F F ( bs) ( 5bs) ( bs) ( bs) ( bs) No. Part (Qty) Material. Body ()...ASTMA5Gr. CFM. Ends ()...ASTMA5Gr. CFM *CFM for SW. Ball ()...ASTMA5Gr. CFM. Stem ()... SS 5. Seat ()... 5% RTFE. Stem Packg ()... 5% CTFE 7. Washer ()... SS. Thrust Washer ()...PTFE +5% Carbon. Belleville Washer()... SUS CSP. Stem Nut ()... SS. Bolts ()... SS. Sprg Washer ()... SS. Bolt Nuts ()... SS. Stem Rg ()...PTFE +5% Carbon 5. ORg ()...Viton. Stopper Washer ()... SS. Sqaure ()... SS. Handle ()... SS. Handle Nut ()... SS. Stopper P ()... SS. Handle Sleeve ()... Vyl

7 PC Full Port SS Ball Valve Direct Mount Pressure Ratg: psi ( bar) WOG for / to / See Page for Actuation High Cycle, Live Loaded, Triple Stem Seal comprised of:» Carbon filled PTFE wedge rg thrust washer and Viton ORg» 5% RTFE Chevron packg» Live loaded Belleville washers» Packg nut mechanically locked to stem Investment cast body and ends Blowout proof stem Full port Direct mountg pad for ISO Std 5 Tube ends Material: ASTM A5CFM (SS) PRESSURE PSI of PRESSURETEMPERATURE RATING oc TEMPERATURE PRESSURE BAR Size / / ½ ½ dia B5TO ISO 5 FF FF FF5 F5F7 F5F7 F7F F7F FF No. Part Material. Body... AISI //L. Ends... AISI //L. Ball... AISI //L. Seat...PTFE/TFM 5. Gasket...PTFE. Thrust Packg...PTFE 7. Stem Packg...PTFE. Rg... AISI. Belleville Washer... AISI. Stem Nut... AISI. Lock Washer... AISI. Rg... AISI. Handle Nut... AISI. Stop P... AISI 5. Handle... AISI. Handle Sleeve... Plastic. Stem... AISI. Sprg Washer... AISI. Bolt Nut... AISI. Bolt... AISI. ORg...Viton D L H M B B K D E D H A C C (lbs) X A L / / / / / / PC Reg. Port Carbon Steel PSI Ball Valve Pressure Ratg: psi ( bar) Sizes and specifications shown are subject to change without notice. B NACE MR5 Blowout proof stem FNPT threaded on both ends Material: ASTM A5N Carbon Steel Size D H L OD F E CV Factor Kg / / / / ¼ ½ No. Part Material. Body... A5. Insert... A5. Ball...AISI. Seat...PTFE+5% G/F 5. Stem...AISI. Thrust Washer...PTFE 7. Stem Seal...PTFE. Handle... AISI. Handle Sleeve...Vyl. Nut... SS. Washer...WCB. Sprg Washer... SS PRESSURE PSI PRESSURETEMPERATURE RATING / ~ of oc TEMPERATURE 5

8 way Reg. Port SS Ball Valve Direct Mount Pressure Ratg: psi ( bar) WOG for / to / See Page for Actuation B7L/T High Cycle, Live Loaded, Triple Stem Seal comprised of:» Carbon filled PTFE wedge rg thrust washer and Viton ORg» 5% RTFE Chevron packg» Live loaded Belleville washers» Packg nut mechanically locked to stem Antistatic device LPort and TPort Blowout proof stem FNPT end connections Material: ASTM A5 CFM (SS) Lockg handle No. Part Material. Body...ASTMA5 Gr. CFM. Ends...ASTMA5 Gr. CFM. Seat... 5% RTFE. Ball...ASTMA5 Gr. CFM 5. Stem...SS. Gasket... 5% RTFE 7. Thrust Washer...PTFE +5% Carbon. Stem Packg... 5% RTFE. Gland...SS. Belleville Washer... SUS CSP. Stem Nut...SS. Handle...SS. Handle Nut...SS. Gasket... 5% RTFE 5. Handle Sleeve...Vyl. Lockg Washer... SUS CSP. Thrust Washer...PTFE +5% Carbon. End Cap...ASTMA5 Gr. CFM. Rg...Viton Size () dia L F / / ½ ISO 5 F F5 F5 F5 F7 F5 F7 F7 F7 F D H D A C d d H (lbs) Kg PC Full Port Carbon Steel Ball Valve Pressure Ratg: psi ( bar) WOG for / to / (. bar) WOG for CV Factor 5 Position Type L T PRESSURE PSI PRESSURETEMPERATURE RATING oc TEMPERATURE PRESSURETEMPERATURE RATING / of B PRESSURE PSI / ~ of PRESSURE BAR oc TEMPERATURE Blowout proof stem Full port FNPT threaded on both ends Lockg handle Carbon steel body and ends Material: ASTM AWCB NACE MR5 Size / / / / ¼ ½ dia () L H W X BL / 5/ 5/ / 7/ 7/ / / / CV Factor (lbs) Kg No. Part (Qty) Material. Body ()... ASTMAWCB. Ends ()... ASTMAWCB. Ball ()...ASTMCFMA5. Ball Seat ()... 5% RPTFE 5. Jot Gasket ()... PTFE. Stem ()...AISI 7. Thrust Washer ()... PTFE. Stem Packg ()... PTFE. Gland Nut ()...AISI. Handle ()...AISI. Sprg Washer ()...AISI. Stem Nut ()...AISI. Handle Sleeve ()...Vyl. Lock Device ()...AISI

9 PC Threaded Body / PSI Ball Valve Pressure Ratg: psi for the BT and psi for the BT BT BT Available threaded, socket weld and threadedsocket weld. SPECIFICATIONS AND FEATURES Designed to ASME B. NPT and SW to ASME B. Tested to API 5 API 7 Firesafe NACE MR5 Available full port and regular port Forged steel body Lockg lever Blowout proof stem Antistatic device Mountg device Sizes and specifications shown are subject to change without notice. STANDARD SOUR No. Part Material. Body... A5N. Cap... A5N. Ball...CFM / SS / / PH. Stem... SS / A5 Gr. / PH 5. Seat*...PEEK. Packg Rg...SS 7. Gland... Carbon Steel. Thrust Washer... Delr/PEEK. Packg...Graphite. ORg...VitonB. ORg...VitonB. Gasket...Graphite. Belleville Washer...SS. Handle...A WCB *NPT valves Size Size () L NPT / FPBT.7 / FPBT.7 / FP / RP FP 5 RPBT 5 RPBT 5 ½ FP. 5 ½ RPBT. 5 ½ RPBT. 5 FP 5 RPBT 5 RPBT 5 L SW 7 7 LOW TEMP / SOUR No. Part Material. Body... A LF. Cap... A LF. Ball...CFM / SS / / PH. Stem... SS / A5 Gr. / PH 5. Seat*...PEEK. Packg Rg...SS 7. Gland... Carbon Steel. Thrust Washer...PEEK. Packg...Graphite. ORg...VitonB. ORg...VitonB. Gasket...Graphite. Belleville Washer...SS. Handle...A WCB L NPT x SW STAINLESS STEEL / SOUR No. Part Material. Body...SS. Cap...SS. Ball...CFM / SS / / PH. Stem... SS / A5 Gr. / PH 5. Seat*...PEEK. Packg Rg...SS 7. Gland... Carbon Steel. Thrust Washer...PEEK. Packg...Graphite. ORg...VitonB. ORg...VitonB. Gasket...Graphite. Belleville Washer...SS. Handle...A5 CFM E H D D D M (lbs)

10 Z SERIES FLOATING FLANGED BALL VALVES PART NUMBERING SYSTEM = Code and Class ZR = Reduced port class ZR = Reduced port class ZR = Reduced port class ZF = Full port class ZF = Full port class ZF = Full port class = Size = / 75 = / = = ½ = = ½ = = = = = Type A = Floatg ball split body B = Floatg ball unibody L = Way L port T = Way T port Z Series Pressure and Temperature Charts CLASS # PRESSURE (PSIG) CL A WCB Nylon PTFE RPTFE CL A5 CFM PEEK of oc TEMPERATURE 5 7 = Type = ASTM A WCB, Non Direct Mount = ASTM A5 LCC = ASTM A5 CFM, ISO Direct Mount = A5N 5 = A LF = ASTM A5 CFM, ISO Non Direct Mount 5 = End Connection F = Raised face flanged* R = Rg jot flanged ends B = Buttwelded ends = Trim Material = Body + ENC = SS = SS* 7 = Seat Material P = PTFE R = RTFE* N = Nylon K = PEEK D = Devlon = Operator H = Handle/Lever G = Gear Operator B = Bare Stem = Special Requirements = Standard Requirement *Denotes standard stock trim. CLASS # PRESSURE (PSIG) CLASS # PRESSURE (PSIG) CL A5 CFM CL Nylon Nylon PTFE RPTFE DEVLON Viton PEEK CL A WCB oc TEMPERATURE of WCB CFM of oc TEMPERATURE

11 ZF # Full Port Way Flanged SS L/T PORT 5.

12 ZF # Full Port Direct Mount SS SPECIFICATIONS Designed accordg to ASME/ANSI Class B. Face to Face per ASME/ANSI B. Long Pattern Flanged designed per ASME/ANSI B.5 NACE MR5 Design Standard per API Markgs per MSSSP5 Pressure Test per API 5 FEATURES Full bore, piece body floatg ball ISO mountg pad, direct mountg Blowout proof stem Cavity Relieved seats, antistatic device Lever operated PRESSURE (BAR) PRESSURETEMPERATURE RATING lb/ of ANSI CLASS FLANGE RATING oc T SEAT R SEAT kg/cm 5 No. Part (Qty) Material. Body ()...ASTMA5 CFM. Cap ()...ASTMA5 CFM. Ball ()...ASTMA5 CFM. Ball Seat ()...5% RPTFE 5. Jot Gasket ()... PTFE +5% Carbon. Stem ()...AISI 7. Thrust Washer ()... PTFE +5% Carbon. ORg ()...Viton. Stem Packg ()... PTFE +5% Carbon. Stem Rg ()...AISI. Belleville Washer ()...AISI. Stem Nut ()...AISI. Stopper ()...AISI. Sprg Washer ()...AISI 5. Handle ()...AISI. Plastic Cover ()... Plastic. Nut* ()...AISI. Stud Bolt* ()...AISI. Nut* (,5,7)...AISI. Stud Bolt* (,5,7)...AISI. Stopper P ()...AISI. Lock Washer ()...AISI. Lock Device ()...AISI Sizes and specifications shown are subject to change without notice. Size d D pcd L H H W W V V X X / / 5 ½. ½ Stem Diameter WT CV 5 lb. Nm lb. Nm lb. Nm 5 lb 5. Nm lb. Nm 55 lb. Nm lb 7. Nm lb.5 Nm lb Nm. lb. kg.5 lb kg 7 lb. kg lb. kg lb.5 kg lb. kg lb kg 7 lb kg 7 lb kg

13 ZF # Full Port Carbon Steel and Low Temp SPECIFICATIONS AND FEATURES Firesafe to API7, latest Ed. Designed to ASME/ANSI Class B. Face to Face to ASME/ANSI B. Long Pattern Flanges to ASME/ANSI B.5 NACE MR5 Design Standard per API Pressure Test per API 5 Full bore, piece body floatg ball ISO mountg pad, direct mountg Blowout proof stem Cavity relievg seats, antistatic device Lever operated, gear operated LEVER and GEAR PARTS LIST No. Part WCB BODY LCC BODY. Body... A WCB... A5 LCC. End... A WCB... A5 LCC. Ball...A F...A F. Stem...A F...A F 5. Seat... RPTFE... RPTFE. Body Gasket... Graphite Spiral Wound... Graphite Spiral Wound 7. Nut...AHM...AHM. Fullthreaded Bolt...AB7M...A L7M. Stem Gasket...PTFE...PTFE. Stem Bearg...PTFE...PTFE. Steel Ball...A7... A7. Antistatic Sprg...A7... A7. Stem Firesafe Gasket I... Flexible Graphite +... Flexible Graphite +. Stem Firesafe Gasket II...Flexible Graphite...Flexible Graphite 5. Packg Gland Bearg...PTFE...PTFE LEVER GEAR LEVER PARTS ONLY. Lever...AISI...AISI. Screw...AB7M...A L7M. Hex Bolt...AB7M... SS. Jot... A WCB... A5 LCC. Nut...AISI...AISI. Axial Retag Rg...AISI 5...AISI 5. Limit Block...A... A. Nut...AISI...AISI. Belleville Washer...A7... A7 5. ORg...Viton...Viton. ORg...Viton...Viton 7. Packg Bushg...A7... A7 GEAR PARTS ONLY WCB BODY. ORg...Viton. ORg...Viton. Packg Bushg... A7. Packg Plate... A WCB. Inner Hex Screw...AB7M. Inner Hex Screw...AB7M. Nut...AHM. Bolt...AB7M. Actuator...Component 5. Yoke... A LCC BODY. ORg...Viton. ORg...Viton. Packg Bushg... A7. Packg Plate... A5 LCC. Inner Hex Screw...A L7M. Inner Hex Screw...A L7M. Nut... A 7M. Bolt...A L7M. Actuator...Component 5. Yoke... A Size L D R C O nd T W H WT /.7 /.5 5. ½ // // // //.5 lb. kg 5.5 lb.7 kg. lb.5 kg 5. lb 7 kg lb. kg lb kg 77 lb 5 kg lb kg lb 5 kg PSI 5 PSI 7 lb 7 lb Nm Nm lb lb Nm Nm lb lb Nm 7 Nm lb 7 lb Nm 55 Nm 7 lb lb Nm Nm 77 lb lb Nm Nm lb Nm lb Nm 7 lb 5 Nm lb 5 Nm 5 lb 5 Nm lb 5 Nm CV 5 5,

14 ZR # Reg. Port Carbon Steel and Low Temp SPECIFICATIONS Firesafe to API7, latest Ed. Designed to ASME/ANSI Class B. Face to Face to ASME/ANSI B. Short Pattern Markgs per MSSSP5 NACE MR5 Design Standard per API Pressure Test per API 5 FEATURES Reduced bore, piece unibody floatg ball ISO mountg pad Blowout proof stem Cavity relievg seats, antistatic device Lever operated No. Part WCB BODY LCC BODY. Body...A WCB...A5 LCC. End...A WCB...A5 LCC. Seat...RPFTE...RPFTE. Ball... A F... A F 5. Stem... A F... A F. Stem Steel Ball... A7... A7 7. Sprg... A7... A7. Stem Gasket...PTFE...PTFE. Stem Bearg...PTFE... PTFE. Stem Firesafe Gasket I... Flexible Graphite +...Flexible Graphite +. Stem Firesafe Gasket II...Flexible Graphite... Flexible Graphite. Packg Bushg Bearg...PTFE... PTFE. ORg...Viton...Viton. ORg...Viton...Viton 5. Packg Bushg... A7... A7. Belleville Washer... A7... A7. Limit Block... A... A. Axial Retag Rg... AISI 5... AISI 5. Nut... SS...SS. Screw... A B7M... AZ L7M. Jot...A WCB...A LCC. Lever... AISI... AISI. Hex Bolt...CS...CS. Nut... SS...SS 5. Gasket...PTFE... PTFE. Gasket...Flexible Graphite + SS...Flexible Graphite + SS Size L D D R C O nd T W H WT x ½ x lb.7 kg PSI 5 PSI lb 5 Nm 7 lb 55 Nm CV x 7 x lb kg 7 lb Nm lb Nm x x lb 5 kg 77 lb Nm lb Nm Sizes and specifications shown are subject to change without notice. x 5 x x x lb kg 5 lb kg lb Nm lb Nm lb 5 Nm 5 lb 5 Nm 5

15 ZF # Full Port Carbon Steel, Low Temp and SS SPECIFICATIONS No. Part WCB BODY LCC BODY SS BODY Firesafe to API7, latest Ed.. Body...A WCB...A5 LCC... A5 CFM. End...A WCB...A5 LCC... A5 CFM Designed to ASME/ANSI. Ball...A F... A F... A F Class B.. Stem...A F... A F... A F Face to Face to ASME/ANSI 5. Seat...RPTFE...RPTFE...RPFTE B. Long Pattern Flanges to ASME/ANSI B.5 NACE MR5 Design Standard per API Markgs per MSSSP5 Pressure Test per API 5. Body Gasket... Graphite Spiral Wound... Graphite Spiral Wound... Graphite Spiral Wound FEATURES Full bore, piece body floatg ball ISO mountg pad Blowout proof stem Cavity relievg seats, antistatic device Lever operated, gear operated GEAR PARTS LIST LEVER PARTS LIST No. Part WCB BODY LCC BODY SS BODY. Body...A WCB...A5 LCC... A5 CFM. End...A WCB...A5 LCC... A5 CFM. Ball...A F... A F... A F. Stem...A F... A F... A F 5. Seat...RPTFE...RPTFE...RPFTE. Body Gasket... Graphite Spiral Wound... Graphite Spiral Wound... Graphite Spiral Wound 7. Nut... AHM... AHM...AM. Fullthreaded Bolt...AB7M... A L7M...A BM. Stem Gasket... PTFE... PTFE...PTFE. Stem Bearg... PTFE... PTFE...PTFE. Steel Ball...A7... A7... A7. Antistatic Sprg...A7... A7... A7. Stem Firesafe Gasket I...Flexible Graphite +...Flexible Graphite +... Flexible Graphite +. Stem Firesafe Gasket II... Flexible Graphite... Flexible Graphite...Flexible Graphite 5. Packg Gland Bearg... PTFE... PTFE...PTFE. Lever... AISI... AISI... AISI + Zn. Screw... AB7M... A L7M... ABM. Hex Bolt... AB7M...SS... SS. Jot...A WCB...A5 LCC...A WCB + Zn. Nut... AISI... AISI... SS. Axial Retag Rg... AISI 5... AISI 5...AISI 5. Limit Block...A... A... A. Nut... AISI... AISI... SS. Belleville Washer...A7... A7... A7 5. ORg... Viton...Viton...Viton. ORg... Viton...Viton...Viton 7. Packg Bushg...A7... A7... A7 7. Nut... AHM... AHM...AM. Fullthreaded Bolt...AB7M... A L7M...A BM. Stem Gasket... PTFE... PTFE...PTFE. Stem Bearg... PTFE... PTFE...PTFE. Steel Ball...A7... A7... A7. Antistatic Sprg...A7... A7... A7. Stem Firesafe Gasket I...Flexible Graphite +...Flexible Graphite +... Flexible Graphite +. Stem Firesafe Gasket II... Flexible Graphite... Flexible Graphite...Flexible Graphite 5. Packg Gland Bearg... PTFE... PTFE...PTFE. ORg... Viton...Viton...Viton. ORg... Viton...Viton...Viton. Packg Bushg...A7... A7... A7. Packg Plate...A WCB...A5 LCC...A WCB + Zn. Inner Hex Screw... AB7M... A L7M...A LM. Inner Hex Screw... AB7M... A L7M...A LM. Nut... AHM...AM...AM. Bolt... AB7M... A L7M... A BM. Actuator... Component...Component...Component 5. Yokes...A... A... A LEVER GEAR

16 ZF # Full Port Carbon Steel sizg chart Cont d from Page Size L D R C O nd T W H WT // // // // 5 lb kg 7 lb kg lb kg lb kg 5 lb kg PSI 5 PSI lb 75 Nm lb Nm lb Nm lb Nm lb 5 Nm 7 lb Nm 7 lb Nm 5 lb Nm lb Nm lb 5 Nm CV 5, ZR # Reg. Port Carbon Steel and Low Temp SPECIFICATIONS Firesafe to API7, latest Ed. Designed to ASME/ANSI Class B. Face to Face to ASME/ANSI B. Short Pattern NACE MR5 Design Standard per API Markgs per MSSSP5 Pressure Test per API 5 FEATURES Reduce bore, piece unibody floatg ball ISO mountg pad Blowout proof stem Cavity relievg seats, antistatic device Lever operated Sizes and specifications shown are subject to change without notice. No. Part WCB BODY LCC BODY. Body... A WCB...A5 LCC. End... A WCB...A5 LCC. Seat... RPFTE...RPFTE. Ball...A F... A F 5. Stem...A F... A F. Stem Steel Ball...A7...A7 7. Sprg...A7...A7. Stem Gasket...PTFE...PTFE. Stem Bearg...PTFE... PTFE. Stem Firesafe Gasket I... Flexible Graphite +...Flexible Graphite +. Stem Firesafe Gasket II...Flexible Graphite... Flexible Graphite. Packg Bushg Bearg...PTFE... PTFE. ORg...Viton... Viton. ORg...Viton... Viton 5. Packg Bushg...A7...A7. Belleville Washer...A7...A7. Limit Block...A...A. Axial Retag Rg...AISI 5... AISI 5. Nut... SS...SS. Screw... A B7M... AZ L7M. Jot... A WCB...A LCC. Lever...AISI... AISI. Hex Bolt... CS...CS. Nut... SS...SS 5. Gasket...PTFE... PTFE. Gasket... Flexible Graphite + SS...Flexible Graphite + SS Size L D D R C O nd T W H WT x ½ x x 7 x x x 7 x 5 x lb 5 kg lb. kg lb 57 kg lb kg PSI 7 PSI 575 lb 5 Nm lb 75 Nm 5 lb Nm lb Nm lb 5 Nm 7 lb Nm 7 lb Nm 5 lb Nm CV

17 ZF # Full Port Carbon Steel and Low Temp SPECIFICATIONS Firesafe to API7, latest Ed. Designed to ASME/ANSI Class B. Face to Face to ASME/ANSI B. Long Pattern Flanges to ASME/ANSI B.5 NACE MR5 Design Standard per API Markgs per MSSSP5 Pressure Test per API 5 FEATURES Full bore, piece split body floatg ball ISO mountg pad Blowout proof stem Antistatic device Lever operated LEVER PARTS LIST No. Part WCB BODY LCC BODY. Body...A WCB...A5 LCC. End...A WCB...A5 LCC. Ball...A F... A F. Stem...A F... A F 5. Seat... Nylon...Nylon. Body Gasket... Graphite Spiral Wound... Graphite Spiral Wound 7. Nut... AHM... AHM. Fullthreaded Bolt...AB7M...A L7M. Stem Gasket... PTFE... PTFE. Stem Bearg... PTFE... PTFE. Steel Ball...A7... A7. Antistatic Sprg...A7... A7. Stem Firesafe Gasket I...Flexible Graphite +...Flexible Graphite +. Stem Firesafe Gasket II... Flexible Graphite... Flexible Graphite 5. Packg Gland Bearg... PTFE... PTFE. Lever... AISI... AISI. Screw... AB7M... A L7M. Hex Bolt... AB7M...SS. Jot...A WCB...A5 LCC. Nut... AISI... AISI. Axial Retag Rg... AISI 5... AISI 5. Limit Block...A... A. Nut... AISI... AISI. Belleville Washer...A7... A7 5. ORg... Viton...Viton. ORg... Viton...Viton 7. Packg Bushg...A7... A7 Size L D R C O nd T W H WT lb kg lb 5 kg lb 7 kg PSI PSI lb 5 Nm lb 5 Nm 57 lb Nm lb Nm 7 lb Nm lb 575 Nm CV 5

18 ZR # Reg. Port Carbon Steel and Low Temp SPECIFICATIONS Firesafe to API7, latest Ed. Designed to ASME/ANSI Class B. Face to Face to ASME/ANSI B. Long Pattern NACE MR5 Design Standard per API Markgs per MSSSP5 Pressure Test per API 5 FEATURES Reduce bore, piece split body floatg ball ISO mountg pad Blowout proof stem Antistatic device Lever operated, gear operated Sizes and specifications shown are subject to change without notice. GEAR PARTS LIST LEVER PARTS LIST No. Part WCB BODY LCC BODY. Body...A WCB...A5 LCC. End...A WCB...A5 LCC. Ball...A F... A F. Stem...A F... A F 5. Seat... Nylon...Nylon. Body Gasket... Graphite Spiral Wound... Graphite Spiral Wound 7. Nut... AHM... AHM. Fullthreaded Bolt...AB7M...A L7M. Stem Gasket... PTFE... PTFE. Stem Bearg... PTFE... PTFE. Steel Ball...A7... A7. Antistatic Sprg...A7... A7. Stem Firesafe Gasket I...Flexible Graphite +...Flexible Graphite +. Stem Firesafe Gasket II... Flexible Graphite... Flexible Graphite 5. Packg Gland Bearg... PTFE... PTFE. Lever... AISI... AISI. Screw... AB7M... A L7M. Hex Bolt... AB7M...SS. Jot...A WCB...A5 LCC. Nut... AISI... AISI. Axial Retag Rg... AISI 5... AISI 5. Limit Block...A... A. Nut... AISI... AISI. Belleville Washer...A7... A7 5. ORg... Viton...Viton. ORg... Viton...Viton 7. Packg Bushg...A7... A7 No. Part WCB BODY LCC BODY. Body...A WCB...A5 LCC. End...A WCB...A5 LCC. Ball...A F... A F. Stem...A F... A F 5. Seat... Nylon...Nylon. Body Gasket... Graphite Spiral Wound... Graphite Spiral Wound 7. Nut... AHM... AHM. Fullthreaded Bolt...AB7M...A L7M. Stem Gasket... PTFE... PTFE. Stem Bearg... PTFE... PTFE. Steel Ball...A7... A7. Antistatic Sprg...A7... A7. Stem Firesafe Gasket I...Flexible Graphite +...Flexible Graphite +. Stem Firesafe Gasket II... Flexible Graphite... Flexible Graphite 5. Packg Gland Bearg... PTFE... PTFE. ORg... Viton...Viton. ORg... Viton...Viton. Packg Bushg...A7... A7. Packg Plate...A WCB...A5 LCC. Inner Hex Screw... AB7M...AL7M. Inner Hex Screw... AB7M...AL7M. Nut... AB7M... AB7. Bolt... AB7M...AL7M. Actuator... Component...Component 5. Yokes...A... A Size L D D R C O nd T W H WT x ½ x x 7 x x x 7 x 5 x / / / / lb. kg 77 lb 5 kg 5 lb 75 kg lb 55 kg PSI 7 PSI lb 75 Nm lb 5 Nm lb 5 Nm 57 lb Nm lb Nm lb Nm 7 lb Nm lb 575 Nm CV

19 T SERIES FLANGED TRUNNION BALL VALVES PART NUMBERING SYSTEM 5 = Port and Class TR = Reduced port class TR = Reduced port class TR = Reduced port class TR = Reduced port class TR5 = Reduced port class TR5 = Reduced port class TF = Full port class TF = Full port class TF = Full port class TF = Full port class TF5 = Full port class TF5 = Full port class = Size = = = = = = = = = = = = = = = = = = = = = Type T = Piece Split Body S = Piece Split Body W = Welded Body = Body Material = ASTM A WCB (C) = ASTM A5 LCC (C) = ASTM A5CFM (C) = ASTM A5N (C) 5 = ASTM A LF (C) = ASTM F (C) 7 = DUPLEX CR 5 = End Connections F = Flanged Raised Face J = Flanged RTJ B = Butt Weld End G = Weld X RF H = Weld X RTJ P = Weld W/PUPS X = GRAYLOC 7 = Trim Material = Body + ENC = SS = SS = SS 5 = DUPLEX CR 7 = Seat Material P = PTFE R = RTFE N = Nylon K = PEEK D = Devlon M = Metal x Metal = Operator L = Handle/Lever G = Gear Operator B = Bare Stem C = Cha Wheel = Special Requirements = Standard Requirement T Series Pressure and Temperature Charts 5 Class PRESSURE (PSI) Class RPTFE % Class Class Class NYLON DELRIN RPTFE 5% HNBR/H5N ORg DEVLON VITON ORg PEEK RPTFE/PTFE SEALS PRESSURE (bar) Class of 7 oc TEMPERATURE Consult ASME. for Specific Material Pressure/Temperature Ratgs. For reference purposes only.

20 T Series Trunnion Ball Valves COMPLIANCE / SPECIFICATIONS ISO :7 / API D ISO Registered Quality System API / API 5 Firesafe to API 7 ASME B., B.5, B. CSA Z5.5 Steel Valves NACE MR5 / ISO 55 Compliance Designs Available Two piece cast or three piece forged designs available. Double Block and Bleed Sizes and specifications shown are subject to change without notice. Independent sprg loaded upstream and downstream seats and body bleed ensure suitability for use double and bleed services. AntiStatic Design Antistatic design to ensure electrical contuity between stem, ball and body. Emergency Seat and Stem Seal Injection Fittgs In the event of leakage, sealant jection fittgs are provided for the stem and seat areas to temporarily allow sealg the valve before a more permanent repair can be made. Automatic Body Cavity Relief Trunnion mounted ball valves are protected from thermal expansion and over pressurizations due to sprg loaded seats which automatically relieve pressure to the down stream side of the body cavity. In addition, all valves come with a manual safe relievg bleed valve. Seat Design Independent free floatg sprg loaded seats provide a tight seal even a low differential pressure situation. Additional Notes Other materials available upon request. Materials shown are general materials of construction for piece or piece Trunnion Ball Valves. We reserve the right to substitute materials listed above with alternate approved material for specific service conditions. No. Part Name Standard NACE. Body. Cap/Adapter. Ball. Seat Holder 5. Seat Insert. Stem 7. Trunnion. Bonnet. ORg. Gasket. Thrust Washer. Beargs. Sprgs. Studs 5. Nuts. Boltg. Mountg Plate A5N A WCB A5N A WCB A5N / ENP A CFM / SS A5N / ENP A FSS RTFE Nylon Devlon PEEK A5N / ENP / / ENP A FSS / PH A5N / ENP / ENP A FSS A5N A WCB VitonB VitonAED VitonGLT HSN EPDM Graphite RTFE PEEK Carbon SteelDU Inconel X7 A B7M A HM A B7M Carbon Steel Low Temperature NACE* A LF* A5 LCC A LF* A5 LCC A LF / ENP* A CFM / SS A LF/ ENP* A FSS RTFE Nylon Devlon PEEK A LF / ENP* / / ENP A FSS / PH A LF / ENP* / / ENP A FSS A LF* A5 LCC VitonB VitonAED VitonGLT HSN (HNBR)* EPDM Graphite* RTFE PEEK Carbon SteelDU Inconel X7 A LM A 7M A L7M Carbon Steel Staless Steel NACE A F A5 CFM A F A5 CFM A F A5 CFM A FSS Duplex DUPLEX CR DUPLEX CR DUPLEX CR A F5 RTFE RTFE Nylon Nylon Devlon Devlon PEEK PEEK A FSS A FSS A7 Type SS A7 Type SS PH PH A FSS A FSS A7 Type SS A7 Type SS A CFM A CFM A F A F VitonB VitonB VitonAED VitonAED VitonGLT VitonGLT HSN HSN EPDM EPDM Graphite Graphite Graphite Graphite PEEK PEEK Carbon SteelDU Carbon SteelDU Inconel X7 Inconel X7 A BM A BM A Gr. A Gr. BM BM Staless Steel Staless Steel

21 T Series Trunnion General Dimensions Data Size Full Port Bore Regular Bore Raised Face Weld End RTJ ANSI Size Full Port Bore Regular Bore Raised Face Weld End RTJ Size Full Port Bore Regular Bore Raised Face Weld End RTJ ANSI ANSI Size Full Port Bore Regular Bore Raised Face Weld End RTJ Size Full Port Bore Regular Bore Raised Face Weld End RTJ ANSI ANSI For formation on ANSI, please contact your Flow+ supplier.

22 T Series Trunnion Ball Valve Cv Flow Coefficients Size # # # # # # / /.5 Cv Cv Cv Cv Cv Cv METHOD OF CALCULATING FLOW The Flow Coefficient Cv of a valve is the flow rate of water (gallons/mute) through a fully opened valve, with a pressure drop of PSI across the valve. To fd the flow of liquid through the valve from the Cv, use the followg formulae. Liquid Flow QL = Cv ( P/G) ½ WHERE QL = flow rate of liquid (gal./m.) P = differential pressure across the valve (psi) G = specific gravity of liquid (for water, G=) Gas Flow Qg = Cv (P P/g) ½ WHERE {( P/P <.)} Qg = flow rate of gas (CFH at STP) P = outlet pressure (psi) g = specific gravity of gas (for air, G=.)

23 Valve Position Monitor FL: Weatherproof, Compact and Durable FL POSITION MONITOR FEATURES OF THE FL Solid and compact design. Weatherproof and corrosion resistant, NEMA, X, IP7 enclosure. Captive staless steel cover bolts. Bolt on green/red position dicator. Quicksets, sprg loaded, spled cams. Requires no tools for adjustments. Dual / conduit entries and pot termal strip to allow for mountg and wirg of solenoid valve. Qty OMRON SPDT mechanical switches rated at 5 amps at VAC / amps at VDC. Other switches are available on request. Approvals: UL, CSA, SEMKO and SEV EN5. DIMENSIONS FOR FL MATERIALS OF CONSTRUCTION Housg Cover/Body...Polyester Pated Alumum Shaft... Staless Steel Indicator Cover... Polycarbonate Indicator... ABS/Polycarbonate Cam... Polycarbonate Sprg... Staless Steel Housg Cover Bolt... Captive Staless Steel ORg... NBR Bushg...Bronze ERg (Shaft)... Staless Steel Ground Lug... Staless Steel Bracket... Staless Steel Wirg diagram for SPDT Mechanical Switch TOP SWITCH RED BLACK BLUE YELLOW WHITE BROWN BOTTOM SWITCH SOLENOID VALVE GROUND

24 Valve Position Monitor FL: Explosion Proof, Compact and Durable Switch Type Mechanical Switch x Switch Ratg Enclosure Protection Explosion Proof Ambient Temp AC V A, 5V.A V A IP7 Exd IIC T C C Conduit Entry NPT/ (PF/, M) Termal Pots Mountg Bracket NAMUR VDI/VDE 5, ISO 5 Material Weight FL POSITION MONITOR Alumum Diecastg.5kg (.lb) Visual Position dicator contacts of termal ports Compatibility with any rotary motion actuator <ISO5> Easy adjustment of cam position Dual / conduit entries DIMENSIONS FOR FL

25 For ISO Direct Mount Ball Valves Only (B, B5/5S/5TC/5T, B7L/T and ZF SS)* ISO Direct Mount Ball Valve Actuation Selection Chart Actuator Sizg Info / / ½ Double Actg SPNIIDA SPNIIDA SPNIIDA SPNII75DA SPNII75DA SPNIIDA SPNII5DA SPNII5DA Sprg Return SPNIISR SPNIISR SPNII75SR SPNII5SR SPNIISR SPNII5SR SPNII5SR SPNIISR Valve 5 5 ADDITIONAL NOTES *Actuator sized for liquid service up to psig differential le pressure usg psig strument air. ** Actuator sizg torques up to psig DP: Water., Oil., Gas Wet (Steam)., Gas Dry.. *** Add % on torque valves for way B7 series valve. **** For high or low temperature applications consult supplier for special seal kits. Example of the Flow+ ZF SS ball valve mounted to a Sharpe SPNII actuator. Actuation Selection Chart for Carbon Steel, Full Port/Reduced Port Ball Valves. * Non Direct Mountg Kit Required FP DA SR FP DA SR RP DA SR RP DA SR / DA SR / DA 75SR DA 5SR / 75DA SR 5DA 5SR 5 DA 5SR 75DA SR 77 5DA 5SR 5DA 5SR 5DA SR 5DA 5SR 5 DA 5SR 5DA SR 5DA SR 5DA 5SR 5DA SR 75 DA SR DA 5SR 7 5DA SR 5DA SR DA SR 75 DA 75 DA SR DA 5SR Actuator sizg torque based on MAWP /lbs, clean wet service at ambient temperature. Actuator recoendation is based on Sharpe SPNII models usg psi supply air. Fabricated mountg kit required. Sizg is subject to review without notice

26 Model / / / / / / / / / / / / / / / Unit A B C D E F G H H H I J L Model M M M M M M M M M M F F F5 F5 F5 F7 F7 F F F F F F M M M M M M M M M M M F7 F7 F F F F F F F F F M M M M M M M M M M Unit M N P Q Q Q Q R S T U V W SPNII Actuator Information

27 Terms and Conditions ValvSource Equipment Limited (here referred to as ValvSource ) is pleased to advise its customers ( Purchaser ) of Flow+ brand products ( Product or Products ) that the manufacturer ( Manufacturer ) warrants its Products agast defects material and workmanship ( Defects ) for a period of eighteen () months from shipment or one () year from stallation ( Warranty Period ). Purchaser acknowledges that the Products are provided to the Purchaser subject only to the limited warranties provided by the manufacturer of the Products and are subject to all of the conditions, limitations and exclusions set out there, all of which are hereby accepted by the Purchaser. Extent of Remedy. Where ValvSource is advised writg of Defects with the Warranty Period, Manufacturer will be deemed to have received notice of the defect and Manufacturer will, at its option, replace or recondition the Product without charge. Where a replacement or reconditioned Product is provided durg the Warranty Period, that Product shall be subject to the same warranty for the unexpired portion of the origal Warranty Period. This remedy shall constitute the exclusive remedy available to Customers for defective Products. Limitations. Neither ValvSource nor Manufacturer shall be liable for any cidental, consequential or other damages, costs or economic losses, cludg, without limitation, any resultg from labour charges, delays, vandalism, negligence, foulg caused by foreign material, damage from adverse water conditions, chemicals, acts of God, or circumstances that are not controllable or reasonably foreseeable by either Manufacturer or ValvSource. Invalidation of Warranty. The warranty exclusions clude, without limitation, (I) any defects caused by faulty stallation performed by Purchaser or third parties, (II) any damage caused by the contractors or tradesman of the Purchaser, (III) any damage caused by improper use or misuse, cludg exposure to excessive temperatures, moisture or cleang agents and solvents and (IV) any damage caused durg transportation or improper storage. All claims received by ValvSource beyond the Warranty Period are valid and shall not be accepted. Disclaimer. Except for the express written warranty contaed here, neither Manufacturer nor ValvSource makes any other warranty, condition, guarantee or demnity, express or implied, statutory or otherwise, regardg the Products INCLUDING WITHOUT LIMITATION, TO THE EXTENT PERMITTED BY LAW, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. All other warranties, conditions guarantees and demnities regardg any Products are hereby disclaimed, excluded and overridden. Further Warranty Information. For complete detailed terms of sale and warranty formation on all products distributed by ValvSource, cludg brands from third party manufacturers distributed by ValvSource, please visit: Please refer to terms and conditions section. Flow+ is a registered trademark 5

28