SERIES 9000 Double Offset HP Butterfly Valves
|
|
- Deborah Rodgers
- 6 years ago
- Views:
Transcription
1 SERIES 9000 Double Offset HP Butterfly Valves Publication S Issue 5/18 Rev. D
2 DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear operators. TOP FLANGE: Conforms to ISO 5211 for the mounting of actuators, levers and gear operators. ONE PIECE SHAFT: Maintains disc position. BLOW-OUT PROOF SHAFT: Guarantees shaft containment, and leak mitigation, in the case of extreme failure situations SHAFT PINS: Enables a vibration free connection between the shaft and the disc. BUSHINGS: High performance PTFE bushings provide correct alignment of shaft through the body and reduces torque. SS reinforcement prevents creep and compression in high temperature applications. STEM SEAL: Positive seal in both directions to prevent leakage. DISC EDGE: Smooth finished disc edge provides superior seal, reduces valve torque and provides bubble tight shutoff. BI-DIRECTIONAL BODY & SEAT DESIGN: Suitable for bi-directional use at full rated pressure. 100% TESTED: Every valve is fully in VSI s ISO 9001 facility to ensure performance and reliability. The body is hydrostatically tested to 1.5 times pressure rating The seat is tested to times pressure rating and at 50psi to ANSI Class VI zero leakage. Every valve is serialized and test report is available. Design Standards Design API 609 ANSI B16.34 Face to Face Dimension API 609 Cold Working Pressure 285 PSIG (CL150 WCB) 740 PSIG (CL300 WCB) 275 PSIG (CL150 CF8M) 720 PSIG (CL300 CF8M) Flange Connection ANSI B16.5 Class 150 ANSI B16.5 Class 300 Testing API 598 2
3 CL150 DIMENSIONS INCHES [MM] ØA B ØC N E H ØJ L ØM P Q W 2 [50] 1.90 [48.2] 10.2 [258.3] 4.75 [120.5] 4 5/8-11UNC 4.9 [125.2] 1.74 [44.2] [11] 2.5 (65) 2.49 [63.2] 10.6 [269.2] 5.50 [139.7] 4 5/8-11UNC 5.2 [132.1] 1.84 [46.7] [11] 3 [80] 2.84 [72.1] 12.0 [305.7] 6.00 [152.5] 4 5/8-11UNC 6.3 [160.3] 1.96 [49.9] [11] 4 [100] 3.67 [93.2] 13.2 [335.2] 7.50 [190.5] 8 5/8-11UNC 7.0 [177.6] [18] 2.13 [54] 6 [150] 5.43 [138.0] 16.3 [415] 9.50 [241.5] 8 3/4-10UNC 8.4 [214] [20] 2.26 [57.4] EXCELLENCE IN COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION 3
4 MATERIALS OF CONSTRUCTION 4
5 MATERIALS OF CONSTRUCTION NO. PART MATERIAL CARBON STEEL STAINLESS STEEL QTY 1 BODY ASTM A216-WCB ASTM A351 CF8M 1 2 CAP ASTM A216-WCB ASTM A351 CF8M 1 3 STEM ASTM A PH 1 4 DISC ASTM A351 CF8M 1 5 PIN AISI SS UPPER BEARING SS REINFORCED PTFE 1 7 LOWER BEARING SS REINFORCED PTFE 1 8 SEAT TFM 1 9 SEAT RETAINER ASTM A216-WCB ASTM A351 CF8M 1 10 PACKING PTFE 1 SET 11 SEAL PTFE 1 12 WASHER #1 AISI SS WASHER #2 AISI SS GLAND AISI SS GLAND FLANGE ASTM A351 CF8M 1 16 GLAND BOLT AISI SS LOCK WASHER AISI SS LOCK WASHER AISI SS SOCKET HEAD CAP SCREW AISI SS HEX HEAD SCREW AISI SS HEX NUT AISI SS SHAFT WASHER AISI SS316 1 EXCELLENCE IN COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION 5
6 VALVE CHARACTERISTICS OPERATING TORQUE SIZE SEAT TORQUE (IN-LB) 100 psi 150 psi 200 psi 285 psi Shown torque values include a 30% safety factor Torque values are for wetted line media. Dry media such as gases should add additional 10% to torque For actuator sizing if modulating service add additional 10% to torque Torque may vary with valve material and line media - testing may be required. FLOW CHARACTERISTICS SIZE Cv at ANGLE OF OPENING (DEGREES) Flow characteristic (Cv) is defined as the volume flow in GPM of water at 70F resulting in a 1psi dp pressure drop The recommended range for flow control is between open Data is for reference only - installation conditions may affect flow characteristic 6
7 MATERIAL AND DESIGN CHARACTERISTICS TEMPERATURE RATINGS CS-WCB SS-CF8M SEAT PRESSURE / TEMPERATURE RATING 600 Pressure (PSI) CS-WCB SS-CF8M PTFE RTFE TFM ALTA PEEK Temperature (F ) CLASS 150 FLANGES CARBON STEEL STAINLESS STEEL CLASS 300 FLANGES Absolute Minimum Operating Temp [-40F Stainless]/[-20F Carbon] CARBON STEEL STAINLESS STEEL MODEL NUMBER BUILDER S90 - / Size Code 3. Body Mtrl. Code 2" 2 Stainless Steel CF8M S Carbon Steel WCB* C Seat Code 6 6 TFM* 1 RPTFE 2 2. Body Code PEEK 3 ASME Class 150* 15 ALTA 4 ASME Class PTFE 5 5. Operator/Act. Code Barestem* Handwheel Electric Pneumatic Hydraulic Blank H Apply Apply Apply Please contact VSI for more information on other available options * Denotes standard product options EXCELLENCE IN COMMERCIAL AND INDUSTRIAL VALVES AND AUTOMATION 7
8 VSI Limited Product Warranty This limited warranty applies in the United States to products manufactured by VSI, LLC. VSI, LLC. warrants the product purchased from it or its authorized reseller to be free from defects in material and workmanship under normal use during the two year warranty period from the date of its purchase. Other products not manufactured by VSI, LLC. which are provided as part of an assembly may carry additional warranties from that manufacturer or supplier. During the warranty period, VSI, LLC. will repair or replace defective parts of the product, or, at VSI, LLC. sole option, issue a credit for the original purchase price of the product. Repaired or replaced product will be warranted hereunder only for the remaining portion of the original warranty period. All exchanged products under this Limited Warranty will become the property of VSI, LLC. A proper Return Material Authorization (RMA) number will have to be obtained for all products to be returned under this Limited Warranty. Any claim under this Limited Warranty must include a description of the problem encountered and any relevant information that may assist VSI, LLC. in the replication or resolution of the problem. This Limited Warranty is transferable during its term to the end user of the product. Any transfer shall not extend or alter the terms of this Limited Warranty. This Limited Warranty extends only to products purchased from VSI, LLC. or its authorized reseller and does not extend to any product that has been damaged or rendered defective as a result of (a) modification, repair, alteration or improper installation by any person other than VSI, LLC. or its authorized representative; (b) unreasonable or improper use or storage, use beyond rated conditions, operation other than per VSI, LLC. or the manufacturer s instructions, or being otherwise subjected to improper maintenance, negligence or accident; or (c) any use of the product after purchaser has knowledge of any defect in the product. The warranties provided above are in lieu of and exclude all other warranties, statutory, express or implied, including without limitation any warranty or merchantability or fitness for a particular purpose. VSI, LLC. expressly disclaims all warranties not stated in this limited warranty. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. VSI, LLC. warranty liability shall not exceed the original purchase price of the defective product. VSI, LLC. is not liable for any damages caused by the product or other products or the failure of the product or other products to perform, including any lost profits, lost savings, incidental or consequential damages. VSI, LLC. is not responsible for charges resulting from the removal and/or replacement of the product. VSI, LLC. is not liable for any claims made by third parties or by the purchaser for a third party. This limitation applies whether damages are sought, or a claim is made, under the Limited Warranty or as a tort claim, product liability claim, contract claim, or any other claim. This limitation cannot be waived by any person. This limitation of liability will be effective even if VSI, LLC. or its authorized representative has been advised by the purchaser of the possibility of such damages. VSI, LLC. tel: +1 (770) fax: +1 (770) sales@valvesolutions.com Copyright 2012 VSI, LLC. As part of an on-going product development process, VSI reserves the right to amend or change specifications without prior notice. Published data may be subject to change. For the latest version, visit our website at
SERIES 7100 STANDARD PORT BALL VALVES
SERIES 7100 STANDARD PORT BALL VALVES Publication S7100-101 Issue 12/14 Rev. C SERIES 7100 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat
More informationSERIES 7400 THREE PIECE BALL VALVES
SERIES 7400 THREE PIECE BALL VALVES Publication S7400-101E Issue 05/16 SERIES 7400 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Seat TFM* RPTFE PEEK ALTA Stem 316 Stainless Steel ISO 5211 Mounting
More informationSERIES 7200 FULL PORT BALL VALVES
SERIES 7200 FULL PORT BALL VALVES Publication S7200-101 Issue 05/16 Rev.F Design Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat TFM* RPTFE
More informationSERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water
More informationSERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
More informationSERIES Way Divert Valve Assembly, 2-inch to 4-inch
SERIES 7300 3-Way Divert Valve Assembly, 2-inch to 4-inch Publication -101 Issue 10/16 Rev.A Electric DC Motor is rated for 100% duty cycle and never requires maintenance The gear assembly comes standard
More informationSERIES V. High Performance Segmented Ball Valve
SERIES V High Performance Segmented Ball Valve Publication SV000-101 Issue 02/17 Rev. D General Information High Rangeability: 300:1 Turn down ratio Flow Characteristic: Equal Percentage Low Pressure Recovery
More informationSERIES LVB Universal Globe Valve Linkage
SERIES LVB Universal Globe Valve Linkage Publication SLVB-101 Issue 08/14 Issue 08/14 Rev. A LVB series linkages are available for 1/2 through 6 globe valves made by most manufacturers like Johnson Controls,
More informationSERIES VC. 1/2 to 1-1/2 Carbon Steel V-Port Control Ball Valve
SERIES VC 1/2 to 1-1/2 Carbon Steel V-Port Control all Valve Publication SVC000-101 Issue 1/18 Rev. C General Information Modified V-Port cast directly into the ball High Rangeability: 300:1 Turn down
More informationSERIES E. V-Port Control Ball Valve
SERIES E V-Port Control Ball Valve Publication SE000-101 Issue 3/18 Rev. E General Information Modified V-Port machined directly into the ball High Rangeability: 300:1 Turn down ratio Flow Characteristic:
More informationHIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE
HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE GENERL INFORMTION HIGH PERFORMNE SEGMENTE V-LL ONTROL VLVE High Rangeability: 300:1 Turn down ratio Flow haracteristic: Equal Percentage Low Pressure Recovery Rate:
More informationSERIES 1000 ELECTRIC ACTUATORS
SERIES 1000 ELECTRIC ACTUATORS DESIGN FEATURES Series 1000 On-Off Rotary Electric Actuator Standard Features SERIES 1000 ELECTRIC ACTUATORS Torque Output Range: 434in-lb to 17,700in-lb Housing: NEMA 4,
More informationHIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationLCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
More informationVSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve
M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication 504-106 Issue 06/12 Design Features General All AWWA Butterfly Valves are of
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
More informationSTAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
More informationBUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by
More informationManufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More information505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
More informationTBM Series 3-Way Ball Valve
www.simtechusa.com TBM Series 3-Way Ball Valve Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 06-26-13 TBM Series Ball Valves SIMTECHRECOMMENDSREADINGTHEFOLLOWINGINFORMATIONPRIORTOINSTALLINGANDUSING
More information33/43/53. Series. 3, 4, 5-Way Direct Mount Multi-Port Ball Valves 1/4" - 4" SERIES 33/43/53 Multi-Port
SERIES 33/43/53 Multi-Port Series 33/43/53 3, 4, 5-Way Direct Mount Multi-Port Ball Valves 1/4" - 4" 9955 International Blvd. Cincinnati, Ohio 45246 www.atcontrols.com PHONE (513) 247-5465 FAX (513) 247-5462
More informationFIGURE 310A & 311A 3-PIECE BALL VALVE
INTRODUCTION This instruction manual includes installation, operation and maintenance information for the figure 310A, 310ASW, 311A, and 311ASW 3-piece 1000CWP, threaded end (NPT) or socket weld end (SW)
More informationHP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationBushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
More informationW SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
More informationDOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES Table of Contents DESCRIPTION PAGE Standard Compliance... 2 Advantages... 3 Resilient Seat Exploded View... 4 Fire Safe Seat Exploded View... 5 CLASS 15
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationPVI 1800/PVI Residential/Commercial Grid-Tied Photovoltaic Inverter WARRANTY MANUAL. Subject to Change REV , Solectria Renewables
PVI 1800/PVI 2500 WARRANTY MANUAL Residential/Commercial Grid-Tied Photovoltaic Inverter 2009, Solectria Renewables Subject to Change REV 10.09 1 Product Warranty & RMA Policy 1.1 Warranty Policy The Solectria
More informationFIGURE 310AM, 310AMSW & 311AM 3-PIECE BALL VALVE
INTRODUCTION This instruction manual includes installation, operation and maintenance information for the figure 310AM, 310AMSW, and 311AM 3-piece 1000CWP, threaded end (NPT) or socket weld end (SW) ball
More informationStrainer and Check Valves
Strainer and Check Valves Quality Valves at Low Cost Table of Contents Strainer and Check Valves 125# Cast Iron Y Strainer Flanged...3 125# Cast Iron Double Door Check Valve...4 Single Flapper Wafer Check
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More information509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
More informationPOWER-SEAL Series P1S / P1F / P1M / P1H Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300
POWER-SEAL Series P1S / P1F / P1M / P1H Manual and Automated High Performance Butterfly Valves ANSI/ASME Class 150 and 300 NEW DESIGN - Reduced Torque - Featuring Actuators and Accessories TABLE OF CONTENTS
More informationASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.
Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read
More informationBALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
More informationAUTOMATION. Operator s Manual. NLS Series. Pneumatic Level Sensors. Rev. A1, 4/07
AUTOMATION P R O D U C T S GROUP, INC. Operator s Manual NLS Series Pneumatic Level Sensors Rev. A1, 4/07 Tel: 1/888/525-7300 Fax: 1/435/753-7490 www.apgsensors.com E-mail: sales@apgsensors.com NLS Series
More informationSERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
More informationThe series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating ANSI 150 General : The series 10 butterfly valves has been developed for a large number of applications
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationPDC High Performance Butterfly Valve Available in sizes 2" Thru 24"
General Description: PDC High Performance Butterfly Valves are designed to offer efficient, bi-directional sealing across a wide spectrum of service conditions, easy installation, long service life and
More informationBVM Series Flanged Industrial Control Ball Valves 2 Way 2-1/2-12
The BVM Series of Flanged Industrial Ball Valves are ideally suited to a wide range of steam and water applications that require a high degree of rangeability. These valves provide exceptional characterized
More informationBushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
More informationGRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0
More informationFabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationBUTTERFLY VALVES HIGH PERFORMANCE
VALVE MANUFACTURER FOR INDUSTRIAL AND WATER APPLICATIONS BUTTERFLY VALVES HIGH PERFORMANCE Pressure : PN10 ~ PN40 / Class 150 ~ 300 Size : Basic Type : 2" ~ 48" (50mm ~ 1200mm) Fire Safety Type : 2" ~
More informationSERIES CVI AWWA C508 SWING CHECK VALVES 2-48
SERIES CVI AWWA C508 SWING CHECK VALVES -48 508-103 R0 June 018 LIFTING LUGS & ACCESSORY HOLE VSI check valve covers come standard with stainless steel lifting lugs for ease of install and movement in
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationintroduction FK Series Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationButterfly Valves. Quality Valves at Low Cost
Butterfly Valves Quality Valves at Low Cost About Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and
More informationS T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM
Precision Engineered Advanced Design Catalog No.: PUB09KS STC Air Actuated Valves Fine Quality Excellent Prices connects fluid power to industrial automation Website: StcValve.com STC PNEUMATIC ACTUATED
More informationButterfly Valves. Quality Valves at Low Cost
Butterfly Valves Quality Valves at Low Cost About Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE HIGH PERFORMANCE BUTTERFLY21 VALVE PRESSURE CLASS: 150600 SIZE RANGE: 2 to 100 API STANDARDS: 609 ASME B.3 CATAL OG NU
More informationSeries PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517
M M Series PVI/PVIF Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 Publication 517-105 Issue 11/13 Design Features Implementations The Eccentric Plug valve is the industry standard
More informationINSTRUCTION MANUAL. Rotary Unidirectional Piezoelectric Motor Evaluation Kit. (Model: UPM-28) Made in USA
www.dtimotors.com INSTRUCTION MANUAL Rotary Unidirectional Piezoelectric Motor Evaluation Kit (Model: UPM-28) Made in USA Rev. 6/2/2017 Table of Contents 1.0 Introduction... 2 2.0 Properties... 3 3.0 Unpacking
More informationBV Series. Threaded Industrial Control Ball Valves 2 Way 1/2-4. Increased Linear Response. Flow Curve Chart
The BV Series Threaded Industrial Ball Valve product line is ideally suited to high temperature and high pressure water or steam as well as a wide range of heavy commercial HVAC control applications. These
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More informationTHREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationNEO-DYN MODEL 100P ENCLOSURE 7 ADJUSTABLE EXPLOSION-PROOF PRESSURE SWITCH
NEO-DYN MODEL 100P ENCLOSURE 7 ADJUSTABLE EXPLOSION-PROOF PRESSURE SWITCH INSTALLATION AND OPERATION MANUAL PN 610-0006 Rev E WARNING CAUTION SPECIAL CONDITIONS FOR SAFE USE NOTE Manual No. 610-0006 Rev
More informationHR-20P Pneumatically Controlled Pressure Regulator
HR-20P Pneumatically Controlled Pressure Regulator Instruction and Service Manual Hydroplex Corporation 230 West Gloria Switch Rd. Lafayette, LA 70507 337-233-0626 www.hydroplexpumps.com I. General Instructions
More informationFeatures of Aegis HPCV Series Ball Valves
Features of Aegis HPCV Series Ball Valves Aegis HPCV Series high integrity ball valves feature the most advanced technology available for isolating and controlling industries most hazardous process liquids
More informationV Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationZ-Tech Severe Chemical Service Valves We Put Control Where You Need It.
Z-Tech Severe Chemical Service Valves We Put Control Where You Need It. Z-Tech Series Valves TABLE OF CONTENTS Ball Valves ZT 4 Series: Three Piece Flanged Ball Valve... -3 Pneumatic Actuators and Accessories...
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationElgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704
Elgin Hydraulic Clutch-Brake ECB-20, Product Number 96225 FORM NO. L-20283-F-070 1 FORM NO. L-20283-F-070 In accordance with Nexen s established policy of constant product improvement, the specifications
More informationSB Series Wafer/Lug Butterfly Valves
SB Series Wafer/Lug Butterfly Valves Engineering Creative Solutions for Fluid Systems Since 1901 ABOUT PRATT INDUSTRIAL Pratt Industrial specializes in the design, engineering, and worldwide distribution
More information2000 WOG Sizes: 1 /2 2 (15 50 mm) Fully Rated to ASME B16.34 Fire-Tested to API 607 Rev. 4
2000 WOG Sizes: 1 /2 2 (15 50 mm) Fully Rated to ASME B16.34 Fire-Tested to API 607 Rev. 4 VTP-2000 3-PIECE BALL VALVE REGULAR PORT, THREADED OR SOCKET WELD ENDS, 1 /2 1 (15 25 mm) 2000 WOG; 1 1 /2 2 (40
More informationINSTALLATION INSTRUCTION & OWNER S MANUAL
CS-2500 & CS-2500P Water Filtration System INSTALLATION INSTRUCTION & OWNER S MANUAL Ver 1.2 All Rights Reserved APEC Water Systems Please keep this Owner s Manual for future reference. It contains useful
More informationINSTALLATION & MAINTENANCE GUIDE
BUTTERFLY VALVES INSTALLATION & MAINTENANCE GUIDE L-1 GLOBE BUTTERFLY VALVE INSTALLATION AND MAINTENANCE GUIDE Table of Contents Page Design Requirements and Installation Care and Maintenance GL175T GL175G
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More information4077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE FAX
Butterfly Valves 4077 AIRPARK DRIVE STANDISH, MICHIGAN 48658 PHONE 989-846-4583 FAX 989-846-9231 www.globesprinkler.com FEBRUARY 2010 L-1 BULLETIN BUTTERFLY REV# 4 GLOBE BUTTERFLY VALVE INSTALLATION AND
More informationSeries 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
More informationPVI 60KW, PVI 82KW, PVI 95KW
PVI 60KW PVI 82KW PVI 95KW WARRANTY MANUAL Commercial, Grid-Tied Photovoltaic Inverters 2008, Solectria Renewables LLC Subject to Change DOC-020099 rev 024 1 1 Product Warranty & RMA Policy Warranty Policy
More informationWARRANTY POLICY. Grid-Tied Photovoltaic Inverters. Revision D. 2014, Solectria Renewables, LLC DOCIN
WARRANTY POLICY Revision D 2014, Solectria Renewables, LLC DOCIN-070360 1 Product Warranty & RMA Policy 1. Warranty Policy Warranty Registration: It is important to have updated information about the inverter
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationDAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationTwo-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
More informationSeries LB. PFA Lined Split Body Flanged Ball Valve. SERIES LB PFA Lined Ball Valve fe
A-T Controls ball valves feature the latest technology in PFA. These fully lined ball valves are available with stainless steel or epoxy coated carbon steel body. The superior PFA lining is able to withstand
More informationDM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
More information