SISTEMAS TECHNICAL CATALOG
|
|
- Mary Cameron
- 6 years ago
- Views:
Transcription
1 SISTEMAS TECHNICAL CATALOG LAMMAS s.r.l. Strada Castellamonte-Bairo 1/A Bairo (TO) Italy. Tel: Fax: Website:
2 GENERAL CLAUSES While every effort has been made to ensure the accuracy and completeness of the information contained in this document, the possibility of errors or omissions in data or technical specifications cannot be entirely excluded. The specifications or data in this document are therefore subject to change without prior notice, in which case the manual will be updated. If you have any questions or notice any inaccuracies, please contact our office: Strada Provinciale Castellamonte 1/A Bairo Canavese (TO) Italy Telephone / Fax ufcomm@lammas.it Website: This manual contains information of a strictly technical nature that is the property of Lammas S.r.l.. No part of this document may be reproduced, disclosed or modified without the owner's written authorisation. All rights reserved by Lammas S.r.l. Release 1 - Review
3 STANDARD groups technical catalog : SISTEMAS FOR CAD FILES ASK TO DESCRIPTION CHAPTER PAGE LINE MODULES PALLET SHOCK ABSORBER 3 15 CHAIN TIGHTENER HEAD MOTORIZED HEAD GEARMOTORS 6 26 SPACERS TRANSFER UNITS TRANSFER UNITS APPLICATIONS CURVES ( SISTEMAS 700 NOT AVAILABLE) MANUAL WORKING STATIONS CENTERING INDEX PALLET UNITS ROTARY TABLES UNITS ELEVATOR UNITS LINE SUPPORTS ACCESSORIES TYPES OF CHAINS
4 TYPE OF LINE 0 1 LINE LINE LINE LINE LINE LINE STANDARD CODIFICATION SISTEMAS COMMERCIAL COMPOSITION FUNCTION REFERENCE DEFINITIOIN From tables page 5 DESCRIPTION GROUP J XXX YYY LINE MODULES 700 XXXXX Lenght module (mm) Tab.1 PALLET 718 X00 / DECELERATORS XX S96 / CHAIN TIGHTENER HEAD S07 / MOTORIZED HEAD Tab.2 GEARMOTORS JJ 1Z 99 Tab.2 SPACERS S03 / TRANSFER UNITS Tab.3 90 CURVES Tab.2 CURVES SUPPORTS 720C 88/89 S96 Tab.4 WORKING STATIONS S03 / CENTERING Tab.3 INDEX PALLET Tab.3 ROTARY TABLES UNITS Tab.3 ELEVATOR UNITS S12 Tab.3 SINGLE LINE SUPPORTS S96 Tab.4 DOUBLE LINE SUPPORTS S96 Tab.4 SIDE-BY-SIDE LINE SUPPORTS S96 Tab.4 3
5 STANDAR CODIFICATION SISTEMAS DEFINITION TABLES S Tab.1 CHAIN DEFINITION FOR LIGHT LINE (SISTEMAS) Valid for LINE MODULES YYY CHAIN 5/8 S17 RAC INX SSP DOUBLE IDLE ROLLER STEEL DOUBLE IDLE ROLLER ACETALIC RESIN STAINLESS INOX SILENT CHAIN WITH STEEL PLATES Types of chains see Chapter 18 Tab.2 GEARMOTOR DEFINITION Valid for: - MOTORIZED HEAD - UNI/BIDIRECTIONAL SHUTTLE YYY BNF HYD SEW MTV SIT STM RSS GEARMOTOR BONFIGLIOLI HYDROMEC SEW - EURODRIVE MOTOVARIO SITI STM ROSSI Tab.3 CILYNDER DEFINITION Valid for : - TRANSFER UNITS - INDEX UNITS - ROTARY TABLES UNITS - ELEVATOR UNITS YYY S03 FST FKP UNV SMC SKP S16 CYLINDER CAMOZZI FESTO FESTO with Clamping unit UNIVER SMC SMC with Clamping unit LAMMAS Tab.4 FEET DEFINITION Valid for: ALL TYPES OF LINE SUPPORTS YYY S96 FOOT PLASTIC Types of gearmotors see chapter 6 5
6 SISTEMAS LINE MODULE SECTION AND COMPOSING ELEMENTS THE LINE MODULE IS MADE BY: - 1 Aluminium profiles complete with guides; - 2 Top cover; - 3 Idle steel roller chain; - 4 Intramodular nuts; - 5 Chain retainer 2 1 Cod POLIZENE GUIDES Available in meters Cod STEEL GUIDES Lenght 1,5 meters SISTEMAS architecture is based on a load bearing structure of rigid and compact extruded aluminum. It incorporates the hardened chain guides and the pallet containment guides, and functions as containment for all the accessory mechanical groups. The line is sustained by adjustable supports with a maximum capacity of 250kg/m. The movement is studied in order to obtain full flexibility; structure fitting units can be rearranged using different configurations ad if necessary the line can be changed easily and fast. Pallet is the steel base on which equipment for transported elements will be applied. The line profiles and the accessories fitting in all configurations enable the application of a square or rectangular «overpallet», whose dimensions can be bigger than those of the pallet itself. 6 CHAPTER 1
7 SISTEMAS LINE COMPOSITION LINE COMPOSITION 1 LINE MODULE 2 COVER LINE 3 CHAINTIGHTENER HEAD 4 MOTORIZED HEAD 5 SUPPORT LINE 6 DISTANZIALE 7 SHOCK ABSORBER 8 PALLET PLATE 9 CHAIN RETAINER 10 GEARMOTOR 7 CHAPTER 1
8 SISTEMAS 250/350/400/450/600/700 LINE SECTION LINE QUOTE A SISTEMAS SISTEMAS SISTEMAS SISTEMAS SISTEMAS SISTEMAS CHAPTER 1
9 ORDERING : COD: J 1 = LINE = LINE = LINE = LINE = LINE = LINE 400 SISTEMAS LINE MODULE ORDERING S 700 J XXXXX YYY 700 1/2/3/4/5/ J XXXXX YYY XXXXX = Module length (mm) Example: S17 Line module 350 length 1000 mm From Tab. 1 page 5 9 CHAPTER 1
10 SISTEMAS STANDARD PALLET TECHNICAL DIMENSIONAL DETAILS QUOTE A B C SISTEMAS SISTEMAS SISTEMAS SISTEMAS SISTEMAS SISTEMAS NOTE: Lammas can customize rectangular pallets with standard external dimensions (for example 250x450, 250x600 ) REFER TO LAMMAS TECHNICAL OFFICE: FOR DIMENSIONAL DETAILS OF PALLETS IN PRESENCE OF INTEGRATED STOP. TO DOWNLOAD.DWG/STEP FILES. 10 CHAPTER 2
11 SISTEMAS STANDARD PALLET MACHINING TECHNICAL DETAILS External stop NOTE: On the upper side all pallet have to be free wide from obstructions, all over the 10 mm area highlighted in order to not compromise the correct working of the external stop. On the lower side do not execute machinig along the axes. These machinig compromise the correct working of the stopper. 11 CHAPTER 2
12 SISTEMAS PALLET STANDARD MACHINING TECHNICAL DETAILS Minimal quote if assembly of dumper unit is needed. Dumper unit The perimeter of pallet must be free from equipment for 10 mm at least. Minimum height quote for the correct functioning of the line in case of addition of overplates, dumper unit or equipments. No kind of mechanical equipment has to be mounted below the highlighted measure in order to avoid collisions with the external stop. Dumper unit For 250 e 350 lines For 450, 600 and 700 lines In order to guarantee the transit of the pallet on the conveyor and the correct use of stop units, the pallet equipment must weight 8.5 kg at least. If the overall weight is lower, fixed stop units without hydraulic damper are recommended. If pallet accumulation occurs, the use of dumpers avoids: 1) Extreme noise due to pallet bump; 2) Undue stress on stop units; 3) Crushing danger with heavy loads 12 CHAPTER 2
13 SISTEMAS PALLET STANDARD MACHINING TECHNICAL DETAILS If the addition of equipment or overplates is needed note that they must be above the pallet for 1,5 mm at least, to avoid any malfunction of the stop unit. Do not assembly any equipment on the notchs located onthe axes to avoid any further malfunctioning of the stop. 13 CHAPTER 2
14 SISTEMAS STANDARD PALLET ORDERING S AND TECHNICAL DETAILS 718 X00 YYY LINE 250 YYY PALLET WEIGHT (kg) DESCRIPTION WEIGHT PALLET + ELEMENT (kg) FLATNESS (mm) Kg IRON PLATE PALLET <15 Kg 0.25 mm C40 HARDENED STEEL ON LEDGES AND HOLES PALLET >15 Kg 0.20 mm LINE 350 YYY PALLET WEIGHT (kg) DESCRIPTION WEIGHT PALLET + ELEMENT (kg) FLATNESS (mm) Kg IRON PLATE PALLET <25 Kg 0.35 mm C40 HARDENED STEEL ON LEDGES AND HOLES PALLET >25 Kg 0.30 mm LINE 400 YYY PALLET WEIGHT (kg) DESCRIPTION WEIGHT PALLET + ELEMENT (kg) FLATNESS (mm) 110 IRON PLATE PALLET <40 Kg 0.30 mm Kg C40 HARDENED STEEL ON LEDGES AND HOLES PALLET >70 Kg 0.30 mm 220 C40 HARDENED STEEL PALLET FOR STOP UNIT >70 Kg 0.30 mm LINE 450 YYY PALLET WEIGHT (kg) DESCRIPTION WEIGHT PALLET + ELEMENT (kg) FLATNESS (mm) 110 IRON PLATE PALLET <40 Kg 0.30 mm Kg C40 HARDENED STEEL ON LEDGES AND HOLES PALLET >70 Kg 0.30 mm 220 C40 HARDENED STEEL PALLET FOR STOP UNIT >70 Kg 0.30 mm LINE 600 YYY PALLET WEIGHT (kg) DESCRIPTION WEIGHT PALLET + ELEMENT (kg) FLATNESS (mm) 110 IRON PLATE PALLET <40 Kg 0.30 mm Kg C40 HARDENED STEEL ON LEDGES AND HOLES PALLET >70 Kg 0.30 mm 220 C40 HARDENED STEEL PALLET FOR STOP UNIT >70 Kg 0.30 mm LINE 700 YYY PALLET WEIGHT (kg) DESCRIPTION WEIGHT PALLET + ELEMENT (kg) FLATNESS (mm) 115 IRON PLATE PALLET <50 Kg 0.30 mm Kg C40 HARDENED STEEL ON LEDGES AND HOLES PALLET >70 Kg 0.30 mm 225 C40 HARDENED STEEL PALLET FOR STOP UNIT >70 Kg 0.30 mm
15 SISTEMAS 250/350/400/450/600/700 SHOCK ABSORBERS ORDERING CODICE XX S96 NOTE: Following the scheme below, choose the most suitable damper unit according to the pallet weight [kg] (loaded/empty) and the conveyor speed [mt/min]. Tab. 5 SHOCK ABSORBERS DEFINITION XX DEFINITION 49 LIGHT 50 MEDIUM 51 HEAVY 52 INCREASED STROKE NOTE: We distinguish shock absorbers with 3 colours: Red: Light White: Medium Black: Heavy S96 LIGHT SHOCK ABSORBER S96 MEDIUM SHOCK ABSORBER S96 HEAVY SHOCK ABSORBER S96 HEAVY SHOCK ABSORBER WITH INCREASED STROKE 15 CHAPTER 3
16 SISTEMAS 250/350 CHAIN TIGHTENER HEAD ORDERING 702 J XXX 99 S07 J REFERRING TO TYPE OF LINE: XXX REFERRING TO CHAIN TIGHTENER TYPE: J LINE XXX TYPE IN LINE HEAD 430 PERPENDICULAR 440 or 450 ELEVATOR AND CURVE OPTIONS Cover chain (only for head 410, 430 and 440, 450) Chain tightener device In line 420 Head LINE QUOTE A J S96 ASSEMBLY COVER HEAD 16 CHAPTER 4
17 Perpendicular (17mm higher than the back) SISTEMAS 250/350 CHAIN TIGHTENER HEAD ORDERING 702 J XXX 99 S07 1) S96 Line BELT CONNECTION 1) S96 Line BELT CONNECTION 2) S96 BRACKET KIT UNIT FOR PERPENDICULAR LINES 440 From ascending/descending lift to line LINE QUOTE A From curve to line It s also applied on the shuttle of lift as head chain tightener head. COVER HEAD SEPARATELY Code 760 J S96 1) S96 Line BELT CONNECTION 1) S96 Line BELT CONNECTION 17 CHAPTER 4
18 SISTEMAS 400/450/600/700 CHAIN TIGHTENER HEAD ORDERING 702 J XXX 99 S07 J REFERRING TO TYPE OF LINE: J LINE XXX REFERRING TO CHAIN TIGHTENER TYPE: XXX TYPE 410 IN LINE 420 HEAD 430 PERPENDICULAR 440 ELEVATOR OPTIONS Cover chain (only for head 410, 430 and 440) ) Chain tightener device In line 420 Head LINE QUOTE A S96 LATERAL PALLET SUPPORT J S96 ASSEMBLY COVER HEAD 18 CHAPTER 4
19 Perpendicular (17mm higher than the back) SISTEMAS 400/450/600/700 CHAIN TIGHTENER HEAD ORDERING 702 J XXX 99 S07 1) S96 BRACKET KIT UNIT FOR PERPENDICULAR LINES 2) S96 CENTRAL PALLET SUPPORT 440 Da ascensore/discensore a linea Da curva a linea S96 LATERAL PALLET SUPPORT 19 CHAPTER 4
20 SISTEMAS 250/350 MOTORIZED HEAD ORDERING 702 J XXX 99 YYY J REFERRING TO TYPE OF LINE: J LINE XXX REFERRING ON MOTORIZED HEAD TYPE: XXX TYPE 510 IN LINE 520 HEAD 530 PERPENDICULAR 540 or 550 ELEVATOR AND CURVE YYY REFERRING TO GEARMOTOR SEE TAB. 2 PAGE 5 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER In line Head LINE QUOTE A ) S96 Line 250 CHAIN CONNECTION 1) S96 Line 350 CHAIN CONNECTION 760 J S96 ASSEMBLY COVER HEAD 20 CHAPTER 5
21 530 SISTEMAS 250/350 MOTORIZED HEAD ORDERING Perpendicular (17mm higher than the back) OPTION: Connection at C cod for side-by-side modules 702 J XXX 99 YYY ) S96 Line 250 BELT CONNECTION 1) S96 Line 350 BELT CONNECTION 2) S96 BRACKET KIT UNIT FOR PERPENDICULAR LINES From ascending/descending lift to line From line to curve It s also applied on the shuttle of lift as head motorized head. COVER HEAD SEPARATELY Code 760 J S96 1) S96 Line 250 CHAIN CONNECTION 1) S96 Line 350 CHAIN CONNECTION 21 CHAPTER 5
22 SISTEMAS 400/450/600/700 MOTORIZED HEAD ORDERING 702 J XXX 99 YYY J REFERRING TO TYPE OF LINE: J LINE XXX REFERRING TO MOTORIZED HEAD TYPE: XXX TYPE 510 IN LINE 520 HEAD 530 PERPENDICULAR 540 ELEVATOR YYY REFERRING TO GEARMOTOR SEE TAB. 2 PAGE 5 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER In line 520 Head LINE QUOTE A ) S96 LATERAL PALLET SUPPORT 760 J S96 ASSEMBLY COVER HEAD 22 CHAPTER 5
23 530 SISTEMAS 400/450/600/700 MOTORIZED HEAD ORDERING Perpendicular (17mm higher than the back) OPTION: Connection at C cod for side-by-side modules 702 J XXX 99 YYY 1) S96 BRACKET KIT UNIT FOR PERPENDICULAR LINES 2) S96 CENTRAL PALLET SUPPORT From ascending/descending lift to line From curve to line S96 LATERAL PALLET SUPPORT 23 CHAPTER 5
24 SISTEMAS 250/350/400/450/600/700 MOTORIZED HEAD UNDER HEAD ORDERING 702 J XXX 99 YYY J REFERRING TO TYPE OF LINE: J LINE XXX REFERRING TO MOTORIZED HEAD TYPE: XXX TYPE 610 IN LINE 620 HEAD 630 PERPENDICULAR 640 ELEVATOR YYY REFERRING TO GEARMOTOR SEE TAB. 2 PAGE 5 NOTE: GEARMOTOR NOT INCLUDED, SEE CHAPTER 6 NOTE: The motorized head under head are used if dimensional problems occur. The gearmotor is positioned under the head and the trasmission occur by the chain trasmission. 610 In line S96 LATERAL PALLET SUPPORT GEARMOTOR LINE QUOTE A Di testata GEARMOTOR J S96 ASSEMBLY COVER HEAD 24 CHAPTER 5
25 630 SISTEMAS 250/350/400/450/600/700 MOTORIZED HEAD UNDER HEAD ORDERING Perpendicular (17mm higher than the back) OPTION: Connection at C cod for side-by-side modules 702 J XXX 99 YYY GEARMOTOR 1) S96 BRACKET KIT UNIT FOR PERPENDICULAR LINES 2) S96 CENTRAL PALLET SUPPORT 640 From ascending/descending lift to line From curve to line 1 2 GEARMOTOR 1 1) S96 LATERAL PALLET SUPPORT GEARMOTOR 25 CHAPTER 5
26 JJ CHAIN SPEED (m/min) SISTEMAS 250/350/400/450/600/700 GEARMOTORS ORDERING Z NOTE: BRAKE GEARMOTORS FOR ELEVATORS ARE AVAILABLE ONLY IN BONFIGLIOLI AND SEW VERSIONS. ASSEMBLING OF GEARMOTOR 0 ON LINE MODULE 5 ON ELEVATOR WITH BRAKE MOTOR 9 ON TRANSFER UNIT 703 JJ 1 Z 99 YYY YYY BNF SEW HYD MTV RSS SIT STM TYPE OF GEARMOTOR BONFIGLIOLI SEW - EURODRIVE HYDROMEC MOTOVARIO ROSSI SITI STM NOTE: THE DIMENSIONS ARE APPROXIMATED. THE DIMENSIONS HAS TO BE CHECKED IN BASE OF THE GEARMOTORS BRAND. 26 CHAPTER 6
27 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 000 SIMPLE SPACER DEFINITION XXX : Numbers from 000 to J XXX 90 S03 J REFERRING TO TYPE OF LINE: J LINE J LINE COVER STOP NUT KIT PALLET IN ENTRANCE 001 SPACER WITH COUNTERSTOP COUNTERSTOP SPACER WITH BRACKET AND COUNTERSTOP BRACKET S97 COUNTERSTOP CHAPTER 7
28 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING 716 J XXX 90 S03 J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 000 to 099 Versions of stop unit available on SISTEMAS 450, 600, 700 WEIGHT OF PALLET 0 < 100 kg kg 2 > 200 kg 005 SPACER WITH PALLET READER PALLET READER S96 (Option: sensor Ø18 cod ) 009 SPACER WITH FIX STOP UNIT (Rif. Kit head code ) Option: n 1 sensor Ø12 code Option: n 1 Thickness cod (for mountig of stop unit on transfers) 0 = STOP S03 1 = STOP = STOP CHAPTER 7
29 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 010 SPACER WITH STOP UNIT 716 J XXX 90 S03 Versions of stop unit available on SISTEMAS 450, 600, 700 WEIGHT OF PALLET 0 < 100 kg kg 2 > 200 kg Option: n 2 sensor Ø12 cod Option: n 1 shock absorber OPTION COUNTERWEIGHT = STOP S03 1 = STOP = STOP S STOP UNIT AND COUNTERSTOP BRACKET S97 COUNTERSTOP Option: n 2 sensor Ø12 cod = STOP S03 1 = STOP = STOP S03 Option: n 1 shock absorber CHAPTER 7
30 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 015 STOP UNIT AND PALLET READER Versions of stop unit available on SISTEMAS 450, 600, J XXX 90 S03 WEIGHT OF PALLET 0 < 100 kg kg 2 > 200 kg Option: n 2 sensor Ø12 cod PALLET READER S96 (Option: sensor Ø18 cod ) Option: n 1 shock absorber OPTION COUNTERWEIGHT = STOP S03 1 = STOP = STOP S PALLET FLOW BREAKER (PN) Option: n 2 sensor Ø12 cod PNEUMATIC READER S96 Option: n 1 shock absorber OPTION COUNTERWEIGHT = STOP S03 1 = STOP = STOP S03 30 CHAPTER 7
31 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 017 PN READER FOR PALLET FLOW BREAKER Versions of stop unit available on SISTEMAS 450, 600, J XXX 90 S03 WEIGHT OF PALLET 0 < 100 kg kg 2 > 200 kg PNEUMATIC READER S SIDE BY SIDE LINES SPACER WITH STOP UNIT Option: n 2 sensor Ø12 cod Option: n 1 shock absorber OPTION COUNTERWEIGHT = STOP S03 1 = STOP = STOP S03 31 CHAPTER 7
32 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 050 STOP UNIT WITH FIXED STEM Versions of stop unit available on SISTEMAS 450, 600, J XXX 90 S03 WEIGHT OF PALLET 0 < 100 kg kg 2 > 200 kg Option: n 1 sensor Ø12 cod Option: n 1 shock absober OPTION COUNTERWEIGHT = STOP S03 1 = STOP S03 2 = STOP S BIDIRECTIONAL STOP UNIT (Kit head cod S96) NOTE: Kit head can be turned of = STOP S03 1 = STOP = STOP Option: n 1 Thickness cod (for mountig of stop unit on transfers) Option: n 1 sensor Ø12 cod CHAPTER 7
33 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 081 BIDIRECTIONAL DAMPERED STOP UNIT Versions of stop unit available on SISTEMAS 450, 600, J XXX 90 S03 WEIGHT OF PALLET 0 < 100 kg kg 2 > 200 kg Option: n 2 sensor Ø12 cod Option: n 1 shock absorber OPTION COUNTERWEIGHT = STOP S03 1 = STOP = / 095 STOP UNIT WITH PALLET READER AND TWEEZER KIT NOTE: FOR INDEX UNIT WITH STROKE >13 mm TWEEZER KIT S96 PALLET READER S96 (Option sensor Ø18 cod ) Option: n 1 shock absorber OPTION COUNTERWEIGHT = STOP S03 1 = STOP = STOP S03 Option: n 2 sensor Ø12 cod CHAPTER 7
34 SISTEMAS 250/350/400/450/600/700 SPACERS ORDERING 716 J XXX 90 S LIGHT SPACER COVER STOP NUT KIT LINE SPACER CHAPTER 7
35 SISTEMAS 250/350/400/450/600/700 TYPES OF TRANSFER UNITS (OVERALL DIMENSIONS) NOTE: The lifting of pallet occurs thanks double effect pneumatic cylinder : - bore 50 mm stroke 25 mm for lines 250 e bore 100 mm stroke 25 mm for lines 400/450/600/700. TRANSFER UNIT MOTORIZED BIDIRECTIONAL TRANSFER UNIT BIDIRECTIONAL TRANSFER UNIT FOR BAY NOTE: The bidirectional transfer unit for bay is used in bidirectional lines and he can keep the motion of the chain using a mechanical gear avoiding to add a gearmotor. 35 CHAPTER 8
36 TRANSFER UNIT WITH BY-PASS SISTEMAS 250/350/400/450/600/700 TYPES OF TRANSFER UNITS (OVERALL DIMENSIONS) BY-PASS OPTION: CENTERING PALLET GROUP FOR TRANSFER UNIT ASSEMBLY TRANSFER UNIT WITH CENTERING (it included two centering pins) LINE Pallet Centered on the chain of the transfer Pallet Centered on the chain of the Line 250 / / / / CENTERING GROUP (the code included only one centering pins) LINE Pallet Centered on the chain of the transfer Pallet Centered on the chain of the Line 250 / / CENTERING NOTE: To apply the centering on transfer unit some modifications has to be done on transfer top side. For more details contact Lammas technical dept. 36 CHAPTER 8
37 SISTEMAS 600 TYPES OF TRANSFER UNITS COMPACT TRANSFER UNITS NOTE: The compact transfer units allow to take the lower line chain sliding level to 200mm from the floor. Spacers for the assembly of transfer units to be ordered separately (see chapter 7). NOTE: The lifting of the pallet occurs thanks to a double effect pneumatic cylinder bore 100 mm stroke 25 mm. TRANSFER UNIT WITH DRIVE Codice : ONLY FOR 600 LINE MOTORIZED BIDIRECTIONAL TRANSFER UNIT Codice : CHAPTER 8
38 SISTEMAS 250/350/400/450/600/700 END TRANSFER UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page PERPENDICULAR TOP-DOWN NOTE: Origin line 17mm highest LEFT RIGHT A) 716 J S03 n 1 Spacer type 010 B) 716 J S03 n 1 Simple spacer C) n 1 External stop for 250/350 C) n 1 External stop for 450/600/700 D) 706 J YYY n 1 Transfer unit E) 716 J S03 n 1 Spacer type OPTION: N 2 Shock absorbers N 1 Sensor kit (706 X S96) N 1 Sensor Ø12 ( ) Stop unit CHAPTER 9
39 SISTEMAS 250/350/400/450/600/700 END TRANSFER UNITS ORDERING 706 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page PERPENDICULAR BOTTOM-UP NOTE: Origin line 17mm lower LEFT RIGHT A) 716 J S03 n 1 Spacer type 011 B) 706 J YYY n 1 Transfer unit C) 716 J S03 n 1 Spacer type 050 D) 716 J S03 n 1 Spacer type 005 OPTION: N 2 Shock absorbers N 1 Sensor kit (706 X S96) N 1 Sensor Ø12 ( ) Stop unit 39 CHAPTER 9
40 SISTEMAS 250/350/400/450/600/700 END TRANSFER UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE 013 QUOTE A QUOTE B QUOTE C QUOTE D SIDE BY SIDE PARALLEL LINES QUOTE E QUOTE F J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page 5 LEFT RIGHT A) 716 J S03 n 1 Spacer type 050 B) 716 J S03 n 1 Simple spacer C) n 1 External stop for lines 250/350 C) n 1 External stop for lines 450/600/700 D) 706 J YYY n 2 Transfer unit E) 716 J S03 n 1 Spacer type 005 F) S96 n 2 Pallet support G) 716 J S03 n 1 Spacer type 011 OPTIONALS: N 3 Shock absorbers N 1 Sensor kit (706 X S96) N 1 Sensor Ø12 ( ) Stop unit 40 CHAPTER 9
41 SISTEMAS 250/350/400/450/600/700 END TRANSFER UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F QUOTE G J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page FAR-BETWEEN PARALLEL LINES LEFT RIGHT A) 716 J S03 n 1 Spacer type 050 B) 716 J S03 n 1 Simple spacer C) n 1 External stop for lines 250/350 C) n 1 External stop for lines 450/600/700 D) 706 J YYY n 2 Transfer unit E) 716 J S03 n 1 Spacer type 005 F) N 1 By-pass G) 716 J S03 n 1 Spacer type S96 for line for line for line for line for line 700 OPTIONALS: N 3 Shock absorbers N 1 Sensor kit (706 X S96) N 1 Sensor Ø12 ( ) 41 CHAPTER 9
42 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page PERPENDICULAR NOTE: Origin line 17mm lower LEFT RIGHT 1) 706 J YYY n 2 Transfer unit 2) 716 J S03 n 1 Spacer type 011 3) 716 J S03 n 1 Spacer type 015 4) 716 J S03 n 1 Spacer type 005 OPTIONALS: N 2 Shock absorber N 1 Sensor kit (706 X S96) N 2 Sensor Ø12 ( ) Stop unit 42 CHAPTER 9
43 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING 706 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page SIDE BY SIDE PARALLEL LINES LEFT RIGHT A) 706 J YYY n 2 Transfer unit B) n 1 External stop for lines 250/350 B) n 1 External stop for lines 450/600/700 C) 716 J S03 n 1 Simple spacer D) 716 J S03 n 1 Spacer type 005 E) 716 J S03 n 1 Spacer type 015 F) 716 J S03 n 1 Spacer type 011 G) S96 n 2 Pallet support OPTIONALS: N 3 Shock absorbers N 1 Sensor kit (706 X S96) N 2 Sensor Ø12 ( ) Stop unit 43 CHAPTER 9
44 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F QUOTE G FAR-BETWEEN PARALLEL LINES 706 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page 5 LEFT RIGHT A)706 J YYY n 2 Transfer unit B) N 1 By-pass C) n 1 External stop for lines 250/350 C) n 1 External stop for lines 450/600/700 D) 716 J S03 n 1 Simple spacer E) 716 J S03 n 1 Spacer type 005 F) 716 J S03 n 1 Spacer type 015 G) 716 J S03 n 1 Spacer type S96 for line for line for line for line for line 700 OPTIONALS: N 3 Shock absorbers N 1 Sensor kit (706 X S96) N 2 Sensor Ø12 ( ) 44 CHAPTER 9
45 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D BIDIRECTIONAL PERPENDICULAR FOR BAY 706 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page 5 NOTE: Origin line 17mm lower LEFT RIGHT A)706 J YYY n 1 Transfer unit for bay B) 716 J S03 n 1 Spacer type 011 C) 716 J S03 n 1 Spacer type 015 D) 716 J S03 n 1 Spacer type 080 E) n 1 External stop for lines 250/350 E) n 1 External stop for lines 450/600/700 F) S96 n 2 Pallet reader 45 OPTIONALS: N 3 Shock absorbers N 1 Sensor kit (706 X S96) N 3 Sensor Ø12 ( ) NOTE: The bidirectional transfer unit for bay is used in bidirectional lines and he can keep the motion of the chain using a mechanical gear avoiding to add a gearmotor. CHAPTER 9
46 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING 706 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F PERPENDICULAR WITH SIDE BY SIDE RETURN J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page 5 NOTE: Origin line 17mm higher LEFT RIGHT A) 716 J S03 n 1 Spacer type 011 B) 706 J YYY n 2 Transfer unit C) 716 J S03 n 1 Spacer type 036 D) 716 J S03 n 2 Spacer type 005 E) 716 J S03 n 1 Spacer type 010 F) n 1 External stop for lines 250/350 F) n 1 External stop for lines 450/600/700 OPTIONALS: n. 4 Shock absorbers n. 1 Sensor kit (706 X S96) n. 3 Sensor Ø12 ( ) Stop unit 46 CHAPTER 9
47 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page BIDIRECTIONAL FAR - BETWEEN PARALLEL LINES LEFT NOTE: gearmotors for transfer unit and by-pass not included. (see chapter 6) RIGHT A) 716 J S03 n 2 Spacer type 011 B) 760 J YYY n 1 Trasferitore Motorizzato C) 716 J S03 n 2 Spacer type 015 D) N 1 Motorized By-pass E) n 1 External stop for lines 250/350 E) n 1 External stop for lines 450/600/700 for line 250 for line for line for line 600 for line 700 OPTIONALS: n. 3 Shock absorbers n. 1 Tsensor kit (706 X S96) n. 3 Sensor Ø12 ( ) 47 CHAPTER 9
48 SISTEMAS 250/350/400/450/600/700 SHUNTING TRANSFER UNIT ORDERING 706 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 033 LINE QUOTE A QUOTE B QUOTE C QUOTE D BIDIRECTIONAL PERPENDICULAR NOTE: Origin line 17mm higher J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page 5 NOTE: gearmotors for transfer unit and by-pass not included. (see chapter 6) LEFT RIGHT A) 760 J YYY n 1 Transfer unit B) 716 J S03 n 1 Spacer type 011 C) 716 J S03 n 1 Spacer type 015 D) 716 J S03 n 2 Spacer type 005 OPTIONALS: n. 2 Shock absorbers n. 1 Sensor kit (706 X S96) n. 2 Sensor Ø12 ( ) 48 CHAPTER 9
49 SISTEMAS 250/350/400/450/600/700 RETURN TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page PERPENDICULAR NOTE: Origin line 17mm higher LEFT RIGHT A) 706 J YYY n 1 Transfer unit E) n 1 External stop for lines 250/350 E) n 1 External stop for lines 450/600/700 C) 716 J S03 n 2 Spacer type 010 D) 716 J S03 n 1 Spacer type 005 OPTION: n. 3 Shock absorbers n. 1 Sensor kit (706 X S96) n. 2 Sensor Ø12 ( ) Stop unit 49 CHAPTER 9
50 SISTEMAS 250/350/400/450/600/700 RETURN TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page SIDE BY SIDE PARALLEL LINES LEFT RIGHT A) 706 J YYY n 2 Transfer unit B) n 1 External stop for lines 250/350 B) n 1 External stop for lines 450/600/700 C) 716 J S03 n 1 Spacer type 011 D) 716 J S03 n 1 Spacer type 050 E) 716 J S03 n 1 Spacer type 005 F) 716 J S03 n 1 Spacer type 010 G) S96 n 2 Pallet support OPTIONALS: n. 4 Shock absorbers n. 1 Sensor kit (706 X S96) n. 2 Sensor Ø12 ( ) Stop unit 50 CHAPTER 9
51 SISTEMAS 250/350/400/450/600/700 RETURN TRANSFER UNIT ORDERING 706 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page LEFT FAR-BETWEEN PARALLEL LINES RIGHT A) 706 J YYY n 2 Transfer unit B) N 1 By-pass D) 716 J S03 n 1 Spacer type 050 E) 716 J S03 n 1 Spacer type 005 F) n 1 External stop for lines 250/350 F) n 1 External stop for lines 450/600/700 G) 716 J S03 n 1 Spacer type S96 for line for line for line for line for line 700 OPTION: n. 4 Shock absorbers n. 1 Sensor kit (706 X S96) n. 2 Sensor Ø12 ( ) 51 CHAPTER 9
52 SISTEMAS 250/350/400/450/600/700 RETURN TRANSFER UNIT ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE QUOTE A QUOTE B QUOTE C NOTE: gearmotors for transfer unit and by-pass not included. (see chapter 6) 706 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE J LINE DEFINITION XXX : Numbers from 011 to 055 DEFINITION YYY : See Tab. 3 page BIDIRECTIONAL PERPENDICULAR RETURN NOTE: Origin line 17mm higher LEFT RIGHT A) 716 J S03 n 3 Spacer type 010 B) 716 J S03 n 1 Spacer type 005 C) 760 J YYY n 1 Motorized transfer unit D) n 2 Rollaway Stop Unit OPTIONALS: n. 5 Shock absorbers n. 1 Sensor kit (706 X S96) n. 3 Sensor Ø12 ( ) Stop unit 52 CHAPTER 9
53 C SISTEMAS 250/ CURVE ORDERING NOTE: Curve supports, entrance stop units (code 716 J S03) and exit overflow plate (cod. 716 J S03) with sensors to be ordered separately (vedi pagina 24). LINE QUOTE A QUOTE B QUOTE C ,5 717, ,5 857,5 B 723 J 100 ZZ YYY J REFERRING TO TYPE OF LINE: J LINEA DEFINITION ZZ: 00 = CLOCKWISE 01 = COUTERCLOCKWISE YYY REFERRING TO GEARMOTOR TYPE See Tab. 2 page 5 NOTE: Maximum weight of pallet 50 kg A Line supports 720C J XXX 88 S18 (Code XXX: see table page 54) 53 CHAPTER 10
54 SISTEMAS 250/350/450/600/ CURVE NOTE: Curve supports, entrance stop units (code 716 J S03) and exit overflow plate (cod. 716 J S03) with sensors to be ordered separately (see chapter 7). LINE QUOTE A QUOTE B QUOTE C ,5 717, ,5 857, ,5 1007, ,5 1232, ,5 1457,5 723 J YYY J REFERRING TO TYPE OF LINE: J LINE J LINE YYY REFERRING TO GEARMOTOR TYPE See Tab. 2 page 5 54 CHAPTER 10
55 SISTEMAS 250/350/450/ CURVE SUPPORTS FOR UPPER LINE 720C J XXX 88 S96 NOTE: The ordering code includes the whole equipment for the curve (N. 4 supports) for line 250/350/450 NOTE: The ordering code includes the whole equipment for the curve (N. 5 supports) for line 600 XXX QUOTE A NOTE M.R.L M.R.L M.R.L. Example n.1 Line curve 250/350/450 with high floor 902 mm J to use only for 600 line Slinding pallet plate J REFERRING TO TYPE OF LINE: Example n.2 Line curve 600 with high floor 902 mm J LINE / 250 / 350 / NOTE: Curve with sideways gearmotor (M.R.L. = Lateral Gearmotor lateral) Ordering code: 720C S96 Ordering code: 720C S96 NOTE: Adjustable feet range Code XXX Code J Code XXX 55 CHAPTER 10
56 SISTEMAS 250/350/450/ CURVE SUPPORTS FOR UPPER AND LOWER LINES 720C JX XXX 89 S96 Code X INTERFILO XXX A+ B A mm B mm D mm E mm NOTE M.R.L M.R.L M.R.L M.R.L M.R.L M.R.L M.R.L M.R.L M.R.L M.R.L / 650 / / / M.R.L M.R.L M.R.L / 650 / / / / 600 / / / M.R.L M.R.L / 650 / / / / 600 / / / / 550 / / / M.R.L J to use only for 600 line Example n.1 Line curve 250/350/450 with high floor 902 mm Ordering code: 720C X S96 Code XXX Example n.2 Line curve 600 with high floor 902 mm Ordering code: 720C 4 X S96 Code J Code XXX Slinding pallet plate J REFERRING TO TYPE OF LINE: J LINE / 250 / 350 / X REFERRING TO QUOTE A: X QUOTE A (mm) NOTE: Adjustable feet range NOTE: Curve with sideways gearmotor. (M.R.L. = Lateral Gearmotor lateral) 56 CHAPTER 10
57 SISTEMAS 250/350/400/450/600/700 WORKING STATIONS ORDERING 712 J XXX 90 S03 NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). J REFERIING TO TYPE OF LINE: J LINE J LINE 020 WITH STOP UNIT AND COUNTERSTOP OPTIONAL: N 1 Shock absorber N 1 Sensor kit (712X020090S96) 1) 716 J S03 n 1 Spacer type 001 2) 716 J S03 n 1 Spacer type 010 LINEA QUOTA A QUOTA B WITH ENTRY STOP UNIT + COUNTERSTOP AND STOP UNIT IN STATION OPTIONAL: N 2 Shock absorbers N 1 Sensor kit (712X030090S96) 1) 716 J S03 n 1 Spacer type 011 2) 716 J S03 n 1 Spacer type 015 LINEA QUOTA A QUOTA B CHAPTER 11
58 SISTEMAS 250/350/400/450/600/700 CENTERING UNITS 760 J YYY PLATE WITH CENTERING GROUP LINE Code YYY YYY YYY YYY YYY S03 FST UNV SMC CYLINDER TYPE CAMOZZI FESTO UNIVER SMC YYY YYY CENTERING GROUP (the code included only one centering pin) Code NOTE: THE PLATE OF CENTERING IS USED WHEN IT WANT PALLET BE IN A GOOD AND STABLE POSITION. FOR EXAMPLE IT IS USED IN MECHANICAL MACHINING WITH INDUSTRIAL ROBOTS. 58 CHAPTER 12
59 SISTEMAS 250/350 INDEX UNITS ORDERING 712 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE 250 LINE 350 J REFERRING TO TYPE OF LINE: XXX LIFTING HEIGHT FROM CHAIN LEVEL (mm) Z (mm) XXX LIFTING HEIGHT FROM CHAIN LEVEL (mm) Z (mm) YYY CYLINDER TYPE J LINEA S03 CAMOZZI FST FESTO FKP FESTO with clamp unit UNV UNIVER SMC SMC SKP SMC with clamp unit Pallet entry side Slinding pallet plate Index Pallet occurs thanks to a double effect pneumatic cylinder, with bore: - Ø50 for line 250, - Ø63 for line 350. Z = High dimensions from chain level Cod: S96 FOR LINE 250 Cod: FOR LINE 350 OPTIONAL: N 1 Sensor kit (712 X S96) N 1 Support couple (SHELF) N 2 Shock absorbers 59 CHAPTER 13
60 SISTEMAS 250/350 INDEX UNITS ORDERING 712 J XXX 90 YYY LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F NOTE: Index units of line 250 and 350 don t have spacers, the accessories are applicated on index cradle. Pallet entry side Slinding pallet plate 60 CHAPTER 13
61 SISTEMAS 400/450/600/700 INDEX UNITS ORDERING 712 J XXX 90 YYY NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). LINE 450/600/700 J REFERRING TO TYPE OF LINE: XXX LIFTING HEIGHT FROM CHAIN LEVEL (mm) Z (mm) YYY CYLINDER TYPE J LINE S03 CAMOZZI FST FESTO Pallet entry side Slinding pallet plate FKP UNV SMC SKP FESTO with clamp unit UNIVER SMC SMC with clamp unit Index Pallet occurs thanks to a double effect pneumatic cylinder, with bore Ø100 for line 600 and 700. Shelf used for LINE 450 Cod: line 450 Cod: line 600 Z = High dimensions from chain level OPTIONALS: N 1 Sensor kit (712 X S96) N 1 Support couple (SHELF) N 2 Shock absorbers N 1 Fall protection ( ) Shelf used for LINE 700 Cod: CHAPTER 13
62 SISTEMAS 400/450/600/700 INDEX UNITS ORDERING 712 J XXX 90 YYY LINE QUOTE A QUOTE B QUOTE C QUOTE D QUOTE E QUOTE F , Pallet entry side Slinding pallet plate 1)716 J S03 - n 2 Spacer type 099 2)716 J S03 - n 1 Spacer type 095 3)716 J S03 - n 1 Spacer type 011 Shelf used for line 450 e 600 Cod: for line 450 Cod: for line 600 Shelf used for line 700 Cod: CHAPTER 13
63 SISTEMAS 250/350/400/450/600/700 INDEX PALLET PALLET CYCLE TIMES 63 CHAPTER 13
64 SISTEMAS 250/350 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø40 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø32 for 250 and 350 line. 060 MANUAL INDEX AND ROTATE LINEA QUOTA A QUOTA B QUOTA C QUOTA D J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE DEFINITION XXX : Numbers from 060 to 064 DEFINITION YYY : type of cylinder See Tab. 3 page 5 A) n 1 Index and rotation for 250 line B) n 1 Index and rotation for 350 line B) N 1 Station supports C) S03 n 2 Dampered stop units D) S97 n 1 Counterstop bracket E) n 1 Counterstop F) S96 n 1 Electrical pallet reader G) n 2 Counterweight H) S96 n 1 Tweezer kit Cod: S96 for 250 line cod: for 350 line OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorbers 64 CHAPTER 14
65 SISTEMAS 400/450/600/700 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø80 stroke 25mm for 400,450,600,700 lines, the rotation occurs thanks rotary cylinder bore Ø MANUAL INDEX AND ROTATE LINE QUOTE A QUOTE B QUOTE C J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE DEFINITION XXX : Numbers from 060 to 064 DEFINITION YYY : type of cylinder See Tab. 3 page 5 A) 716 J S03 N 1 Spacer type 011 D) 716 J S03 N 1 Spacer type 095 C( 760 J YYY N 1 Index and rotation D) N 1 Station supports OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorbers Cod: for 450 line Cod: for 600 line (ex) Cod: for line 65 CHAPTER 14
66 SISTEMAS 250/350 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø40 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø32 for 250 and 350 line. 712 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE INDEX AND ROTATE LINE QUOTE A QUOTE B QUOTE C QUOTE D A) 760 J YYY n 1 90 Index and rotate B) N 1 Station supports C) S03 n 2 Dumpered stop units D) S97 n 1 Counterstop bracket E) n 1 Countertstop F) S96 n 1 Electrical pallet reader G) n 2 Counterweight H) S96 n 1 Tweezer Cod: S96 for 250 line Cod: for 350 ine OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorbers Position of blocks used for rotation at CHAPTER 14
67 SISTEMAS 400/450/600/700 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø80 stroke 25mm for 400,450,600,700 lines, the rotation occurs thanks rotary cylinder bore Ø INDEX AND ROTATE LINE QUOTE A QUOTE B QUOTE C J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE DEFINITION XXX : Numbers from 060 to 064 DEFINITION YYY : type of cylinder See Tab. 3 page 5 A) 716 J S03 N 1 Spacer type 011 B) 716 J S03 N 1 Spacer type 095 C) 760 J YYY n 1 90 Index and rotation for weights <150 Kg D) N 1 Station supports Cod: for 450 line Cod: for 600 line (ex) Cod: for line Position of blocks used for rotation at 90. OPZIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorbers 67 CHAPTER 14
68 SISTEMAS 250/350 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 712 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE INDEX AND ROTATE LINE QUOTE A QUOTE B QUOTE C QUOTE D Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø40 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø32 for 250 and 350 line. A) 760 J YYY n Index and rotation B) N 1 Station supports C) S03 n 2 Dumpered stop unit D) S97 n 1 Bracket for counterstop E) n 1 Counterstop F) S96 n 1 Electrical pallet reader G) n 2 Counterweight H) S96 n 1 Tweezer Kit Cod: S96 for 250 line Cod: for 350 line OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock abosrbers Position of blocks used for rotation at CHAPTER 14
69 SISTEMAS 400/450/600/700 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 712 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE INDEX AND ROTATE LINE QUOTE A QUOTE B QUOTE C Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø80 stroke 25mm for 400,450,600,700 lines, the rotation occurs thanks rotary cylinder bore Ø80. A) 716 J S03 N 1 Spacer type 011 D) 716 J S03 N 1 Spacer type 095 C) 760 J YYY n Index and rotation for weights <150 Kg D) N 1 Station supports Cod: for 450 line Cod: for 600 line (ex) Cod: for line Position of blocks used for rotation at 180. OPZIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorbers 69 CHAPTER 14
70 SISTEMAS 250/350 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). 712 J XXX 90 YYY J REFERRING TO TYPE OF LINE: J LINE OR 180 INDEX AND ROTATE LINE QUOTE A QUOTE B QUOTE C QUOTE D Index Pallet occurs thanks to 2 double effect pneumatic cylinders bore Ø40 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø32 for 250 and 350 line. A) 760 J YYY n Index and rotation B) N 1 Station supports C) S03 n 2 Dumpered stop unit D) S97 n 1 Bracket for counterstop E) n 1 Counterstop F) S96 n 1 Electrical pallet reader G) n 2 Counterweight H) S96 n 1 Tweezer kit Cod: S96 for 250 line Cod: for 350 line OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorbers Position of blocks used for rotation at 180. KIT cod The rotation is stopped in position 90 by means of a cylinder (bore 40 stroke 25 mm). 70 CHAPTER 14
71 SISTEMAS 600 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet for 600 line occurs thanks to 2 double effect pneumatic cylinders bore Ø80 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø J XXX 90 YYY J BASING ON TYPE OF LINE: J LINE NOTE: Only for 600 line OR 180 INDEX AND ROTATE A) 716 J S03 N 1 Spacer type 011 D) 716 J S03 N 1 Spacer type 095 C) N 1 Index and rotation 90 or 180 D) 716 J 09990S03 N 1 Light spacer E) N 1 Station support OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorber 71 CHAPTER 14
72 SISTEMAS 600 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet for 600 line occurs thanks to 2 double effect pneumatic cylinders bore Ø80 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø J XXX 90 YYY J BASING ON TYPE OF LINE: J LINE NOTE: Only for 600 line OR 270 INDEX AND ROTATE A) 716 J S03- N 1 Spacer type 011 D) 716 J S03 -N 1 Spacer type 095 C) N 1 Index and rotation 90 or 270 D) 716 J 09990S03 N 1 Light spacer E) N 1 Station support OPTIONALS: N. 1 Sensor kit (712 X S96) N. 2 Shock absorber 72 CHAPTER 14
73 SISTEMAS 250/350/400/450/600/700 ROTARY TABLES UNITS OVERALL DIMENSIONS (the same for all tables) Cylinder stroke = 25mm LINE QUOTE A LINE QUOTE A CHAPTER 14
74 SISTEMAS 600 ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering the pallet weight (loaded and empty) and the conveyor speed (see page 14). Index Pallet occurs thanks to 2 double effect pneumatic FESTO cylinders bore Ø80 stroke 25mm, the rotation occurs thanks rotary cylinder bore Ø80. THESE UNITS ARE USED FOR VERY HEAVY PALLETS (>150 KG) OR WEIGHT VERY UNBALANCED. 90 INDEX AND ROTATION PALLET HEAVY Cod: NOTE: ONLY FOR 600 LINE A) S03 n 1 Spacer 4011 B) S03 n 1 Spacer 4095 C( n 1 90 Index and rotation pallet D) n 2 Station supports OPTIONAL: n. 1 Sensor kit (712 X S96) n. 2 Shock absorbers 180 INDEX AND ROTATION PALLET HEAVY Cod: A) S03 n 1 Spacer 4011 B) S03 n 1 Spacer 4095 C( n Index and rotation heavy D) n 2 Station supports OPTIONALS: n. 1 Sensor kit (712 X S96) n. 2 Shock abosrbers 74 CHAPTER 14
75 SISTEMAS 600 ELECTRICAL ROTARY TABLES UNITS ORDERING NOTE: Shock absorber excluded, to be ordered separately, considering: - the pallet weight (loaded and empty) - the conveyor speed (see chapter 3). Index Pallet occurs thanks to 2 double effect pneumatic FESTO cylinders bore Ø80 stroke 25mm, the rotation occurs thanks electrical rotary table with motor of 0,09 kw (LIGHT) or 0,25 kw (HEAVY). These units allow all differents rotations. NOTE: ONLY FOR 600 LINE ELECTRICAL ROTARY TABLES UNITS LIGHT Cod: A) S03 n 1 Spacer type 011 B) S03 n 1 Spacer type 095 C) n 1 Index and rotation OPTIONAL: n. 1 Sensor kit (712 X S96) n. 2 Shock absorber NOTE: This kind of system has to be referred to a maximum weight of kg. ELECTRICAL ROTARY TABLES UNITS HEAVY Cod: A) S03 n 1 Spacer type 011 B) S03 n 1 Spacer type 095 C) n 1 Index and rotation heavy OPTIONAL: n. 1 Sensor kit (712 X S96) n. 2 Shock abosrber NOTE: This kind of system has to be referred to a maximum weight of kg. 75 CHAPTER 14
76 SISTEMAS 600 ROTATOR TYPES COMPACTS NOTE: Compact rotators can be used when the height space is minimum; pallet sliding plane can be 200 mm. All the spacers needed have to be ordered separately (See chapter 7). ALZATA E ROTAZIONE MANUALE NOTE: ONLY FOR 600 LINE Cod : Manual rotation Cod : Manual rotation ALZATA E ROTAZIONE AUTOMATICA Cod : Automatic rotation 180 Cod : Automatic rotation CHAPTER 14
77 SISTEMAS 600 ROTATOR TYPES ROTO-TRANSFER UNIT NOTE: Roto-transfer units can transfer the pallet plate as normal orthogonal transfer unit, but in the same time 90 rotate it in order to mantain the same working side. All the spacers needed have to be ordered separately (See chapter 7). AUTOMATIC ROTO-TRANSFER Code : NOTE: ONLY FOR 600 LINE MANUAL ROTO-TRANSFER Codice : CHAPTER 14
78 SISTEMAS 600 ELECTRIC ROTO-TRANSFER UNIT ORDERING S NOTE: Electric Roto-transfer units are the best solution to rotate pallet 90 /180 (in every direction) and subsequently ortogonally transfer it. It is a transfer and a rotation unit in only one station, so it is excellent in applications where there is not enough space to place both stations. All the spacers needed have to be ordered separately (See chapter 7). ELECTRIC ROTO-TRANSFER UNIT (LIGHT) Code: NOTE: ONLY FOR 600 LINE NOTE: This kind of system has to be referred to a maximum weight of kg. 78 CHAPTER 14
79 SISTEMAS 600 ELECTRIC ROTO-TRANSFER UNIT ORDERING S HEAVY ELECTRIC ROTO-TRANSFER UNIT Code: NOTE: ONLY FOR 600 LINE NOTE: This kind of system has to be referred to a maximum weight of kg. 79 CHAPTER 14
80 SISTEMAS 250/350 PNEUMATIC SINGLE PALLET LIFTER ORDERING S 714 J XXX 90 YYY J REFERRING TO THE LINE J LINEA XXX H min (mm) NOTE: Vertical stroke (300/600 mm) made by double effect cylinder ø 63 mm for Sistemas 250/350. Fall protection: On the lifter pneumatic brakes on linear guideways. Entry/exit pallet gearmotor+stops/counterstop. Gearmotors not included in the lifter code. (See chapter 6). OPTIONALS: N 1 Sensor kit with cable channel (714 X S96) STROKE (mm) Not included in the lifter code: Entry stop code 716 J S03 (See chapter 7) Exit safety counter-stop code 716 J S03 + Pallet reader S96 YYY S03 FST FKP UNV SMC SKP CYLINDER TYPE CAMOZZI FESTO FESTO with clamp unit UNIVER SMC SMC with clamp unit LINEA QUOTA A QUOTA B Pallet sliding plane Bottom level 80 CHAPTER 15
81 SISTEMAS 400/450/600/700 PNEUMATIC SINGLE PALLET LIFTER ORDERING S 714 J XXX 90 YYY J REFERRING TO THE LINE J LINEA XXX H min (mm) NOTE: Vertical stroke (300/600 mm) made by double effect cylinder ø 80 mm for Sistemas 400/450/600/700. Fall protection: On the lifter pneumatic brakes on linear guideways. Entry/exit pallet gearmotor + stops /counterstop. Gearmotors not included in the lifter code. (See chapter 6). STROKE (mm) Not included in the lifter code: - Entry stop code 716 J S03 (See chapter 7) Exit safety counter-stop code 716 J S03 + Pallet reader S96 OPTIONALS: N 1 Sensor kit with cable channel (714 X S96) NOTE: Maximum liftable weight 120 kg YYY S03 FST FKP UNV SMC SKP LINEA QUOTA A QUOTA B CYLINDER TYPE CAMOZZI FESTO FESTO with clamp unit UNIVER SMC SMC with clamp unit 81 CHAPTER 15
82 SISTEMAS 250/350 PNEUMATIC LIFTER WITH LIGHT SHUTTLE ORDERING S 714 J XXX 90 YYY J REFERRING TO THE LINE J LINEA XXX H min (mm) STROKE (mm) NOTE: Vertical stroke from 300 to 600 mm made by double effect cylinder ø63 mm for Sistemas 250/350. Fall protection: On the lifter pneumatic brakes on linear guideways. YYY S03 FST FKP UNV SMC SKP CYLINDER TYPE CAMOZZI FESTO FESTO with clamp unit UNIVER SMC SMC with clamp unit OPTIONALS: N 1 Sensor kit with cable channel (714 X S96) GEARMOTORS not included in the lifter code. (See chapter 6). LINE QUOTE A CHAPTER 15
83 SISTEMAS 400/450/600/700 ELECTRIC LIFTER 2 COLUMNS ORDERING S 714 J XXX 90 S12 Not included in the lifter code: Entry stop code 716 J S03 (See chapter 7) Exit safety counter-stop code 716 J 00190S03 + Pallet reader S96 Note: Vertical stroke (300/1500 mm) made by electric three-phase gearmotor with break. Gearmotors not included in the lifter code. (See chapter 6). J IREFERRING TO THE LINE J LINEA XXX H min (mm) STROKE (mm) OPTIONALS: N 1 Sensor kit with cable channel (714 X S96) To have more info and technical dimensions (CAD files) please contact Lammas technical dept.. NOTE: Maximum liftable weight 300 kg GEARMOTORS not included code. (See chapter 6). LINEA QUOTA A QUOTA B CHAPTER 15
84 SISTEMAS 400/450/600/700 ELECTRIC LIFTER 4 COLUMNS ORDERING S 714 J XXX 90 S12 To have more info and technical dimensions (CAD files) please contact Lammas technical dept.. OPTIONALS: N 1 Sensor kit with cable channel (714 X S96) NOTE: Maximum liftable weight 300 kg J REFERRING TO THE LINE J LINE XXX H min (mm) STROKE (mm) LINE QUOTE A QUOTE B CHAPTER 15
85 SISTEMAS 250/350/400/450/600/700 SINGLE LEG 720 J XXX 88 S96 XXX QUOTE A QUOTE C BOTTOM SPACER SI SI SI SI SI SI SI SI SI SI SI SI J REFERRING TO TYPE OF LINE: J LINE J LINE Example Sistemas Single leg with sliding plane A= 902 mm Ordering code: S SI SI SI Code J Code XXX SI SI NO Note: Adjusting height range of the foot mm NO NO NO Pallet sliding plane LINEA QUOTE B CHAPTER 16
86 SISTEMAS 250/350/400/450/600/700 DOUBLE LEVEL LEG 720 X XXX 89 S96 CodeX INTERFILO XXX A + B mm A mm B mm D mm E mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / C mm Example Double level leg with sliding plane A+B= 902 (A= B= 302 mm) Ordering code: S96 Code X Code XXX Pallet sliding plane LINE QUOTE F X REFERRING TO QUOTE A: X QUOTE A (mm) NOTE: Adjusting height range of the foot mm CHAPTER 16
87 SISTEMAS 250/350/400/450/600/700 SIDE BY SIDE DOUBLE LEVEL LEG 720 X J XXX 89 S96 Code X INTERFILO XXX A + B mm A mm B mm D mm E mm / / / / / / / / 2 / / / / / / / / 2 / / / / / / / / C mm J REFERRING TO TYPE OF LINE: J LINE J LINE Example Sistemas Leg with sliding plane A+B= 1002 (A= B= 402 mm) Ordering code: S96 Code X Code J Code XXX LINE QUOTE F QUOTE G QUOTE H X REFERRING TO QUOTE A: X QUOTE A (mm) Minimal B quote=350 mm NOTE: Adjusting height range of the foot mm Pallet sliding plane 87 CHAPTER 16
88 SISTEMAS 250/350/400/450/600/700 SIDE BY SIDE SINGLE LEVEL LEG 7200 J XXX 89 S96 XXX A mm BOTTOM SPACER C mm YES YES YES YES YES YES YES YES 865 Example Sistemas Leg with sliding plane A= 1102 Ordering code: S96 J REFERRING TO TYPE OF LINE: J LINE J LINE YES YES YES 715 Code X Code XXX YES YES YES YES YES YES NO NO NO 265 LINE QUOTE F QUOTE G QUOTE H Pallet sliding plane NOTE: Adjusting height range of the foot mm 88 CHAPTER 16
89 SISTEMAS 250/350/400/450/600/700 ACCESSORIES STOP UNIT COMPOSITION HEAD KIT STOP GROUP AMORTIZED UNIT HEAD KIT Code STANDARD STOP HEAD KITS HEAD KIT Code HEAD KIT Code S96 Higher head used on Stop unit with inclination 8 (pallet weight upper to 200 Kg) OLD HEAD KITS (NOT IN OUR WAREHOUSE) HEAD KIT Code EQUIPPED FOR CLAMP UNIT HEAD KID Code CHAPTER 17
90 SISTEMAS 250/350/400/450/600/700 ACCESSORIES STOP UNIT HEAD KIT NOTE: STEM MOTION (UP/DOWN MOTION) IS DRIVEN BY A SIMPLE EFFECT CYLINDER WITH SPRING RETURN; BORE 40 MM STROKE 15 mm. NOTE: THIS MOVEMENT CAN BE SENSED BY A Ø12 SENSOR ( ) AND ITS OWN BRACKET ( ). NOTE: SENSORS NOT INCLUDED. AMORTIZED STOP UNIT PALLET WEIGHT (Kg) STOP UNIT WITH STEM EXTRACTION STOP UNIT WITHOUT STEM EXTRACTION INCLINATION ( ) HEAD KIT INCLUDED < 100 Kg > 100 Kg < 200 Kg > 200 Kg S03 Standard S / S03 Standard S FIXED STOP UNIT < 100 Kg S S03 / > 200 Kg / / HEAD KIT FIXED STOP UNIT 90 CHAPTER 17
91 SISTEMAS 250/350/400/450/600/700 ACCESSORIES BIDIRECTIONAL STOP UNIT HEAD KIT NOTE: STEM MOTION (UP/DOWN MOTION) IS DRIVEN BY A SIMPLE EFFECT CYLINDER WITH SPRING RETURN; BORE 40 MM STROKE 15 mm. NOTE: THIS MOVEMENT CAN BE SENSED BY A Ø12 SENSOR ( ) AND ITS OWN BRACKET ( ). NOTE: SENSORS NOT INCLUDED. BIDIRECTIONAL AMORTIZED STOP UNIT PALLET WEIGHT (Kg) STOP UNIT WITH STEM EXTRACTION STOP UNIT WITHOUT STEM EXTRACTION INCLINATION ( ) HEAD KIT INCLUDED < 100 Kg S03 Standard / S96 > 100 Kg / S96 BIDIRECTIONAL FIXED STOP UNIT < 100 Kg S03 Standard / / S96 > 100 Kg / / S96 HEAD KIT 91 CHAPTER 17
92 SISTEMAS 250/350/400/450/600/700 ACCESSORIES SPECIAL STOP UNIT HEAD KIT NOTE: STEM MOTION (UP/DOWN MOTION) IS DRIVEN BY A SIMPLE EFFECT CYLINDER WITH SPRING RETURN; BORE 40 MM STROKE 25 mm. NOTE: THIS MOVEMENT CAN BE SENSED BY A Ø12 SENSOR ( ) AND ITS OWN BRACKET ( ). NOTE: SENSORS NOT UNCLUSED. AMORTIZED STOP UNIT PALLET WEIGHT (Kg) STOP UNIT WITH STEM EXTRACTION STOP UNIT WITHOUT STEM EXTRACTION INCLINATION ( ) HEAD KIT INCLUDED > 100 Kg > 100 Kg S03 Stroke 25 mm ø top spring 1.2 mm S03 Stroke 25 mm ø top spring 1.5 mm / / STOP UNIT WITH DOUBLE EFFECT COD HEAD KIT CHAPTER 17
93 SISTEMAS 250/350/400/450/600/700 ACCESSORIES COUNTERWEIGHT with screws and nuts NOTE: This kit has to be mounted only with pallet with a weight between 8 and 15 kg. INTERNAL SIDE STOP COD DX and SX right and left version available. Stem motion is driven by a simple effect cylinder with spring return; bore 40 mm stroke 15 mm. OPTIONALS: -STEM MOTION SENSOR -PALLET PRESENCE - DECELERATOR DIFFERENT HEADS ARE AVAILABLE SUITABLE TO CUSTOMER REQUEST. DAMPERED EXTERNAL STOP Sistemas 250/ Sistemas 400/450/600/700 OPTIONALS: 1 SENSOR Ø12 ( ) 1 SHOCK ABSORBER 93 CHAPTER 17
94 SISTEMAS 250/350/450/600/700 ACCESSORIES FIXED EXTERNAL STOP ( COD S96) COUNTER-STOP WITH UP/DOWN MOTION RELEVANCE (SENSOR) (COD ) OPTIONAL: 1 SENSOR Ø12 ( ) OPTIONAL: 1 SENSOR Ø12 ( ) COUNTERSTOP (COD ) COUNTERSTOP BRACKET (COD S97) with screws and nuts COD ) PALLET READER SUPPORT (COD S96) with screws COD ) OPTIONAL: 1 SENSOR Ø18 ( ) 94 CHAPTER 17
95 SISTEMAS 250/350/400/450/600/700 ACCESSORIES STOP BUSH (COD ) SENSOR BUSH (COD ) (APPLICATED ON SPACERS WITH SHOCK ABSORBER) CLAMP KIT (COD S96) (APPLICATED ON SPACERS WITH SENSOR) INTRAMODULAR NUT (COD S96) with screws (COD ) STOP UNIT BRACKET USED TO FIXING STOP ON MOTORIZED/CHAIN-TIGHTENER HEADS (COD S96) with screws (COD ) BRACKET KIT USED TO FIX LEGS TO THE FLOOR (COD ) with screws and nuts (COD ) 95 CHAPTER 17
96 SISTEMAS 250/350/400/450/600/700 ACCESSORIES BAIONETTA / T NUT TO BE USED TO FIX ACCESSORIES TO LAMMAS PROFILES; AVAILABLE AS FOLLOWS: M6 HOLE; M5 HOLE; M4 HOLE. ZINC COATED INSERT COD TO BE APPLIED ON PROFILES ; ; FOR FOOT ASSEMBLY KIT STOP COVER NUT (COD KIT) PALLET SUPPORT (COD S96) PUFFER OR DUMPER UNIT ( ) FOR WEIGHT < 40 Kg PUFFER OR DUMPER UNIT ( ) FOR WEIGHT > 40 Kg IN ABSENCE OF DAMPERED EXTERNAL STOP, IT S POSSIBLE APPLIED A LOWER DUMPER UNIT cod CHAPTER 17
97 SISTEMAS 250/350/400/450/600/700 ACCESSORIES FIXING PROFILES BRACKET COD with screws and nusts COD THICKNESS FOR MOUNTING STOP UNIT ON TRANSFERS COD PROFILE CONNECTION BRACKET (SMALL) COD with screws and nusts COD PROFILE CONNECTION BRACKET (BIG) COD with screws and nusts COD CHAPTER 17
98 SISTEMAS 250/350/400/450/600/700 ACCESSORIES BOLT Used in elevator for 250 and 350 line (COD ) BOLT Used in elevator for 400/450/600 and 700 line (COD ) HEAD BOLT (COD ) HEAD BOLT (COD ) 98 CHAPTER 17
99 SISTEMAS 250/350/400/450/600/700 ACCESSORIES OIL COLLECTION CUP COD with screws and nusts COD CHAIN RETAINER COD S96 with screws and nusts COD NOTE: To be fixed below module heads and modules joint. AUTOMATIC LUBRIFICATION KIT COD CHAPTER 17
100 ROLLAWAY EXTERNAL STOP UNIT FOR SIDE BY SIDE LINE COD UNIVER CYLINDER COD FESTO CYLINDER COD WITHOUT CYLINDER DOUBLE EFFECT PNEUMATIC DRIVE BORE 20 - STROKE 50 SISTEMAS 250/350/400/450/600/700 ACCESSORIES OPTIONALS: 2 Sensors Ø12 ( ) 1 Shock absorber NOTE: For this application contact Lammas Technical Dept. Slinding pallet plate External stop with cylinder External stop without cylinder Rollaway external stop unit NOTE: Bespoke machining to be done on the head plates in case of application of this kind of stop on transfer units. 100 CHAPTER 17
101 SISTEMAS 250/350/400/450/600/700 ACCESSORIES CHAIN TIGHTENER COVER COD TENSIONING DEVICE (COUPLE) COD Old versions (before than SEPTEMBER 2007): - Tensioning device code Chain tightener cover S96 MOTORIZED HEAD COVER COD CHAPTER 17
102 SISTEMAS 250/350/400/450/600/700 ACCESSORIES 60X80 LIGHT PROFILE X80 PROFILE CAP COD LEG PROFILE LEG PROFILE CAP COD X80 LIGHT PROFILE X80 PROFILE CAP COD X45 PROFILE X45 PROFILE CAP COD CHAPTER 17
103 SISTEMAS 250/350/400/450/600/700 CHAIN TYPES STEEL CHAIN WITH DOUBLE IDLE ROLLER 5/8 S17: COD PACK OF 5Mt OF CHAIN COMPLETE OF CONNECTING LINK COD CONNECTING LINK STEEL CHAIN WITH PLASTIC DOUBLE IDLE ROLLER 5/8 RAC: COD R -- PACK OF 5Mt OF CHAIN COMPLETE OF CONNECTING LINK COD R CONNECTING LINK STAINLESS STEEL CHAIN WITH DOUBLE IDLE ROLLER 5/8 INX: COD NX -- PACK OF 5Mt OF CHAIN COMPLETE OF CONNECTING LINK COD NX CONNECTING LINK P PITCH = 5/ mm M LINK = mm 103 CHAPTER 18
104 SISTEMAS 250/350/400/450/600/700 CHAIN TYPES SILENT CHAIN WITH STEEL PLATES 5/8 SSP: PACK OF 5Mt OF CHAIN COMPLETE OF CONNECTING LINK CONNECTING LINK P PITCH = 5/ mm M LINK = mm 104 CHAPTER 18
catalogue Endless handling solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS
au Endless handling catalogue solutions CATALOGUE EDITION AU 04 AUTOMOTIVE MATERIALS HANDLINGS DRIVE AND DRIVEN ROLLERS INDEX DUGOMRULLI HISTORY 3 PRODUCT RANGE 5 AUTOMOTIVE ROLLER SOLUTIONS 7 COATED PALLET
More informationCETO solutions in intra-logistic Customized & Engineered to Order. Roller Conveyors Boxes Handling
CETO solutions in intra-logistic Customized & Engineered to Order Roller Conveyors Boxes Handling Antípoda Lda. Rua de Julieta Ubaldina Miranda 106, Lote 17 4470-441 Maia Portugal Phone: +351 229 535 437
More informationUCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
More informationIdea bank Transfer cars
3104-1 5392 3104-2 AX100 Transfer car, low built, with side support for the goods. TH 260 mm AX100 Transfer car with roller turntable. Low built AX100 Stopp, mechanical lowered end stop for 7172 5177-4
More informationWE INNOVATE THE TUBE PROCESSING TECHNOLOGY
WE INNOVATE THE TUBE PROCESSING TECHNOLOGY 1 THE LEVITATE INNOVATIVE WORKFLOW Whit our International patent you can bend with mandrel pipes with diameters from 9.52 up to 42mm directly from coil, with
More informationIndex. Order Code INDEX PRODUCT OVERVIEW AND ORDER CODE
LINEAR UNIT QME vanemærket tryksag 541-713 INDEX PRODUCT OVERVIEW AND ORDER CODE Index Product overview and order code... 3-4 Diagram all types... 5 ellow and adjustment wheel... 6 Product overview...
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationwww.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationla liberté de concevoir MODULAR TRANSFER SYSTEM
la liberté de concevoir MODULAR TRANSFER SYSTEM new PRODUCTS 2012 la liberté de concevoir french industrial leader has brought innovating solutions to the industry. Our approach offers a complete freedom
More informationGFX HEPCO GUIDANCE SYSTEM FOR BECKHOFF XTS
PRT2 HEPCO GUIDANCE SYSTEM FOR BECKHOFF XTS hepcomotion.com HepcoMotion.com Contents Hepco Guidance Systems for Beckhoff XTS Introduction... 1 1-Trak and 1-Trak Lite System Composition... 2 PRT2 System
More informationADDA FERreport JULY2013
ADDA FERreport JULY2013 report arabic mission Flying Cut-Off DB8 End Facing EF8 Hydro test HT8 Handling H8 Tubotech 2013 ADDAFER.IT JULY2013 ARABIC MISSION For a prestigious tube manufacturer, who is located
More informationLIFTING COLUMN LC2 PRODUCT DATA SHEET
PRODUCT DATA SHEET LIFTING COLUMN LC2 Features LC2 is a specially designed telescopic aluminum lifting column incorporating a LINAK 24 V or 12V DC linear actuator (LC28C or LC30) equipped with a safety
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationRexMover Series 277 & 297 Rodless Shuttle Cylinder
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages
More informationInstallation and maintenance guide
Installation and maintenance guide SPRAY VALVE DAS 30 DAV TECH SRL Via Ravizza, 30-36075 Montecchio Maggiore (VI) - ITALY Tel. 0039 0444 574510 - Fax 0039 0444 574324 davtech@davtech.it - www.davtech.it
More informationRotary Indexing Table with Face Gear
FIBROTAKT Rotary Indexing Table with Face Gear Product No. 1.001.00.00.00.01000 1 7975 006 4 08/007 Contents FIBRO The latest technology with a tradition of service /3 FIBROTAKT at a glance 4 Technical
More informationLinear Torque Limiting Clutch
LM Series Features & Options Linear Torque Limiting Clutch Innovation Description & Operation Sankyo's LM Series offers adjustable torque limiting in any linear axis. It mounts directly to linear slide
More informationINSTALLATION MANUAL FOR SWING SHUTTERS KAF212. FACE S.r.l. Viale delle Industrie, Dosson di Casier Treviso Italy
INSTALLATION MANUAL FOR SWING SHUTTERS KAF212 FACE S.r.l. Viale delle Industrie, 74 31030 Dosson di Casier Treviso Italy INDEX Subject Page 1. General safety instruction 2 1.1 EC marking and European directives
More informationTS 5 Transfer System Version 2.0
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service TS Transfer System Version.0 The Drive & Control Company 0 Bosch Rexroth AG TS.0 3 0 30 (00. Symbols No.
More informationUSER INSTRUCTIONS FOR SLIDING DOORS
ENGLISH USER INSTRUCTIONS FOR SLIDING DOORS SL3L LIGHT SL4A ADVANCED SL5A ADVANCED SL5H HEAVY SLTA TELESCOPIC-ADVANCED SL4E EMERGENCY SL5E EMERGENCY SL5B BIG SLTE TELESCOPIC-EMERGENCY FACE S.p.A. Viale
More informationMax. stand-by power without accessories Use frequency 100% Max leaf width Motor Motor powered at 36V with encoder Max.
Automated system for NEW Passage opening 700-3.000 mm Max. leaf weight 110-2x70 Kg FAAC SERIES automated systems are intended for the automation of exits in compliance with European Standard EN16005; in
More informationstructure and components
HSP 643 WAVE structure and components Vertical motion double drive system, two linear rollers high preloaded guideways, two guideways in a composite material. Vertical Z motion supported by two pneumatic
More informationLABORATORY PELLET MILL PELLET MILL TYPE CLM
The pellet MILL FOR the Professionals LABORATORY PELLET MILL CLM 200.20 hp Capacity: 150-300 kg/h - 6 pole motor 15 kw max. - Conditioner motor 0,5 kw - Feeder speed can be used with VFD or hydraulic gear
More informationISOMOVE. Mechanical actuators ISO 6431
ISOMOVE Mechanical actuators ISO 6431 ISOMOVE INDEX 2 Introduction 4 Mounting information and advices 6 10 40 14 20 63 25 80 29 33 Overall dimensions INTRODUCTION GENERAL FEATURES The ISOMOVE actuators
More informationWARE HANDLING SERVO MECHANISM SERVO INVERT SERVO TAKE-OUT BDF A.P. PUSHER
WARE HANDLING SERVO MECHANISM SERVO INVERT SERVO TAKE-OUT BDF A.P. PUSHER WARE HANDLING SERVO MECHANISM BDF, first in the world on the 1992, has designed and implemented in the I.S. Machines the Servo
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationINDUSTRY PROCESS AND AUTOMATION SOLUTIONS. Technical Bulletin
INDUSTRY PROCESS AND AUTOMATION SOLUTIONS Technical Bulletin Guidelines for selection of planetary gear units of the 300- INDUSTRIAL series for installation in hazardous areas, classified by Directive
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationSLIDING DOORS SYSTEMS
SLIDING DOORS SYSTEMS COPLANAR SYSTEM FOR CABINET REVERSIBLE SYSTEM Load capacity up to 25kg for one door tested by Catas. Door thickness up to 40mm. Soft closing and soft opening. Cuttable in every customized
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationDeceleration Technology. Rotary Dampers with high-torque range WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H
Rotary Dampers with high-torque range WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H 6030 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:
More informationTSS Tool Stand. Installation and Operation Manual. Document #:
TSS Tool Stand Installation and Operation Manual Document #: 9610-20-1068 Engineered Products for Robotic Productivity Pinnacle Park 1031 Goodworth Drive Apex, NC 27539 Tel: +1-919.772.0115 Fax: +1-919.772.8259
More informationACCESSORIES FOR BALUSTRADES
ACCESSORIES FOR BALUSTRADES 2 12 www.inal.gr Ø40 30 30 Ø43x1,5 30 30 Ø42,4 3004 Adjustable Angle For Tube Ø42x2,6 514 gr 27 R21,2 27 10 Ø8,2 Ø37 30 30 30 30 Ø43x1,5 3 12 3034 Rubber For Slot Tube Ø48
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationROTARY TILLER TYPE "URT"
Del Morino srl, v.caroni di Sotto 19, I-52033 Caprese Michelangelo AR Italy Ph: +39-575-791059 Fax: +39-575-791210 E.mail: export@del-morino.it http://www.del-morino.it USE AND MAINTENANCE MANUAL ROTARY
More informationROLL-UP COVERS. Special Product: SURE-SPRING.
Special Product: SURE-SPRING The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. The spring mechanism design takes
More informationXRAY S Parallel Opening/Closing Type Gripper 2 Finger 2200N
XRAY S 2200 2 Finger 2200N Handles big jobs with tremendous torque and force capability. Long jaws are no problem with the incorporated linear bearing rail. Sealed for years of trouble free use in tough
More informationROLL-UP COVERS Standard products
A ROLL-UP COVERS Standard products P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages: Reliability Compact size Extremely high speeds
More informationKIT INSTALLATION INSTRUCTION
Siemens Industry, Inc. KIT INSTALLATION INSTRUCTION KIT PN TGX:16152-922, Rotary 15900-785 KIT PN TGX:16152-932, Short Stroke Linear Rev 1 KIT PN TGX:16152-942, Long Stroke Linear July 2011 SITRANS VP300
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
EASYSLIDE Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make changes
More informationIC80 Series INTRODUCTION
SN-PL/2011/002 IC80 Series INTRODUCTION Sankyo America, Inc. is proud to offer the IC80 inline chassis precision link conveyor to manufacturers around the world. This innovative design features zero-backlash
More informationCNC COMPOSITE PROCESSING MACHINE
SHENG HUI CNC COMPOSITE PROCESSING MACHINE ShengHu i V T M Series Composite Processing Machine T h e p er f ec t c o m b i n at i o n of m i l l i n g m ac h i n e an d ver t i c al l at h e Th e ve r
More informationMTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
More informationLOCKED SERIES. Machine Failures. General Information. set up. maintenance. reconditioning. repair 30.4%
General Information LOCKED SERIES 2 Lowering machinery process costs is key in today s world. According to a recent study approximately a third of all machine stoppages result in unexpected damage and
More informationMini Rotary Actuator/Rack & Pinion Style
Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5
More informationLaboratory pellet mill
The pellet MILL FOR the Professionals Laboratory pellet mill - 6 pole motor 18,5 kw max. - Conditioner motor 0,75 kw - Feeder speed can be used with VFD or hydraulic gear drive (0,37 kw) - Die I.D. 200
More informationP.T.O. GEARBOXES Technical Catalogue October 2017
GEARBOXES Technical Catalogue October 7 web edition Gearboxes Table of contents Introduction... ML Speed increaser gearbox for pumps GR. with European unified flange... ML5 Speed increaser gearbox for
More informationSection 5 Transverse Conveyors
8981 00 22 11/07 TS4plus inear Motion and Assembly Technologies Bosch Rexroth Corp. -1 Section Transverse Conveyors BS4 are designed to transfer pallets for short transport distances (e.g. between two
More informationFAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer.
EMCO FAMUP CNC machining centers Vertical milling centers FAMUP MC-Line/MCX-Line With integrated pallet changer FAMUP MCP-Line Vertical milling machines FAMUP MMV-Line EMCO, the industrial systems supplier
More information30 center post tyre changer G-Frame rigidity Simple and reliable Side Lift NG Tyre leverless system Ergo Control Helper Device FALCO EVO 630
30 center post tyre changer G-Frame rigidity Simple and reliable Side Lift NG Tyre leverless system Ergo Control Helper Device FALCO EVO 630 Best in class for tyre specialists Product at a glance Tyre
More informationAutomatic Pivot Style Band Saw Model S-23A
Automatic Pivot Style Band Saw *Photo may feature machine with optional accessories Prepared By: Company: Address: Prepared For: Customer Name: Company: Address: Phone: Fax: Phone: E-mail: TECHNICAL SPECIFICATIONS
More informationWork Stations & Benches
Work Stations & Benches Aluminium Profile - Safety Fencing - Belt Conveyors Machine Guarding - Machinery Frames 2 CONFIGURE YOUR STATION 40x40 Aluminium Profile Frame 20mm Laminate Worktop Work Station
More informationL-SEALER MACHINES UNEXPECTED IDEAS
UNEXPECTED IDEAS Minipack-Torre S.p.A. Via Provinciale, 54-24044 Dalmine (BG) - Italy Tel.: +39.035563525 - Fax +39.035564945 www.minipack-torre.it - info@minipack-torre.it CONCEPT. CREATIVE, ART DIRECTION
More informationMB SERIES High Precision Horizontal Boring Mills
MACHINING CENTERS by MACHINING CENTERS by YAMA SEIKI USA, INC. 5788 Schaefer Ave., Chino, CA 91710 TEL : ( 909 ) 628-5568 ( 888 ) 976-6789 FAX : ( 909 ) 628-5556 Web : www.yamaseiki.com E-mail : info@yamaseiki.com
More informationACTUATORLINE ELM series
ACTUATORLINE ELM series www.rolloncorp.com www.motiontech.com.au Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 ELM 50 SP 6 ELM 65 SP 7 ELM 80 SP
More informationFurnital srl via Manzoni Montano Lucino (Co) - Italy Tel Fax
Furnital srl via Manzoni 11 22070 Montano Lucino (Co) - Italy Tel. +39 031 605386 Fax. +39 031 4721516 info@furnital.it www.furnital.it THE COMPANY profile Furnital would like to be considered as a valuable
More information12.5 Ball Chain Type, SME Series
12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,
More informationPRODUCT CATALOG SHUTTLE PRO
PRODUCT CATALOG SHUTTLE PRO Contents Custom Conveyor Drives Shuttle Pro-100LP...4 Shuttle Pro-200HS...5 Standard Conveyor Drives Shuttle Pro-150...6 Shuttle Pro-250...7 Shuttle Pro-500...8 Shuttle Pro-1000...9
More informationNMSB XX K12 Sliding Crash Gate
NMSB XX K12 Sliding Crash Gate The Nasatka Maximum Security Barrier NMSB XX (pronounced 20) is a DOS listed K12 cantilevered sliding crash gate engineered for high-threat security facilities. The gate
More informationPNCE ELECTRIC CYLINDERS
ELECTRIC CYLINDERS Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationProducts Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
More informationLoPro aluminium based slide system
LoPro aluminium based slide system Introducing the Hepco LoPro Hepco LoPro has been introduced to provide the designer with a lightweight yet rugged linear slide system. LoPro is aluminiumbased with steel
More informationStepper Motors ver ver.5
A Stepper s Stepper s A-1 Overview... A-2 Overview and... A-15 & Stepper and RK Series A-16 RK... A-47... A-51 Stepper Series A-52 Stepper Series A-8 See Full Product Details Online www.orientalmotor.com
More informationStopping Accuracy of Brushless
Stopping Accuracy of Brushless Features of the High Rigidity Type DGII Series Hollow Rotary Actuator The DGII Series hollow rotary actuator was developed for positioning applications such as rotating a
More informationIndex INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL
LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...
More informationManual. Simrad DD15 Direct Drive. English
Manual Simrad DD15 Direct Drive English www.simrad-yachting.com A brand by Navico - Leader in Marine Electronics MANUAL SIMRAD DD15 Direct Drive 20222303A English Simrad DD15 Direct Drive About this document
More informationStandard. Industrial Storage Technology
Standard Industrial Storage Technology List of abbreviations used General abbreviations: V Packaging unit Dimensions and units: B Width H Height L Length T Depth Ø Diameter cm Centimetre kg Kilogram mm
More informationR310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
More information3F Linux. Simply modular. 3F Linux D. 3F Linux L
3F Linux 3F Linux Simply modular 3F Linux is a modular system designed to allow you to compose channels as simply and efficiently as possible. Like all products in the 3F Filippi range, it is fitted with
More informationModel 104 Slider Belt Conveyor
Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety 10-2018 GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel
More information/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
More informationSCANIO SYSTEMS, S.L. Ronda de la Vía, nº 3, 4º-2ª l Hospitalet de Llobregat (Barcelona) Tel Fax
SCANIO SYSTEMS, S.L. Ronda de la Vía, nº 3, 4º-2ª 08903 l Hospitalet de Llobregat (Barcelona) Tel. 93.432.69.39 Fax. 93.432.62.47 e-mail: info@scaniosystems.com www.scaniosystems.com CONTENT COLUMN LIFTERS
More informationEC DECLARATION OF CONFORMITY FOR MACHINES (DIRECTIVE 98/37/EC) WARNINGS FOR THE INSTALLER
EC DECLARATION OF CONFORMITY FOR MACHINES (DIRECTIVE 98/37/EC) Manufacturer: Address: Declares that: FAAC S.p.A. Via Benini, 1-40069 Zola Predosa BOLOGNA - ITALY 740-24V mod. operator is built to be integrated
More informationBELT CONVEYOR CB/M5 Series
BELT CONVEYOR CB/M5 Series User and maintenance manual 1 DECLARATION OF CONFORMITY The company: Tel. +39-0444 450 620-451 520 Fax +39-0444 671 840 declares under its own responsibility that the machine
More informationLIGHT TELESCOPIC RAIL
LIGHT TELESCOPIC RAIL Svanemærket tryksag 541-713 INDEX Index Selecting Guide... 4 5030 Steel... 5 5040 100 % Ext. Steel... 6 5040 140 % Ext. Steel... 7 210 Aluminium... 8 220/230 Aluminium... 9 410 Aluminium...
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationAngular Style Air Gripper
Angular Style Air Gripper Series /A/M 15 Angular style air gripper Series /A/M - Auto switch is attachable. 8 mm x 0 mm x mm g Body option (Only for A-) Side piping Port Port A- Short body. 1 mm x 0 mm
More informationMechanisms. Prepared by Juan Blázquez, Alissa Gildemann
Unit 9 Mechanisms 1. Mechanisms Mechanisms are devices that transmit and convert forces and motions from an input to an output element. They enable us to use less effort to carry out a task. We can classify
More informationTELESCOPIC RAIL HEAVY
TELESCOPIC RAIL HEAVY Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
More informationBI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
More informationThe Easiest Way to Build a Custom Handling System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service The Easiest Way to Build a Custom Handling System camoline the Cartesian Motion building system 2 Rationalizing
More informationInnovative Designs For Positive Parts Transfer
Innovative Designs For Positive Parts Transfer AUTO-SLIDE CATALOG CONTENTS Cylinder Powered Linear Slide (AFPRS ) 3 Cylinder Powered Bi-Directional Slide (AFPRBD) 6 V Style Pick & Place (AFPPV) 8 L Style
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
BELT CONVEYOR Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to make
More informationMcKenzie s Low Profile Modular Belt Conveyor provides the design flexibility needed to meet your requirements.
McKenzie Handling Systems has been designing and manufacturing standard and custom belt conveyors since its incorporation in 1985. Belt types for all your applications Permanently Sealed Bearings T-slots
More information150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
More informationThe Available Solution CYCLO DRIVE. Gearmotors & Speed Reducers. Series
The Available Solution CYCLO DRIVE Gearmotors & Speed Reducers 6000 Series WHAT DO YOU THINK OF THIS? THESE ARE THE ADVANTAGES OF THE NEWEST CYCLO, 6000 SERIES: More frame sizes, gear ratios and motor
More informationHepcoMotion PSD80. screw driven linear actuator
HepcoMotion PSD80 screw driven linear actuator Introduction The HepcoMotion PSD80 is a new screw driven linear unit, which is a companion to the popular and cost-effective PDU2 range of belt driven units,
More informationA concentration of power in such a small space?
A concentration of power in such a small space? Industrial air motors 15M, 20M, 28M, MM, MN, MO Reversible models Power: from W up to 645W Idle speed: from 44 up to 16.500 rpm Nonreversible models Power:
More informationActuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More information1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
More informationFITTING AND CONNECTION INSTRUCTIONS
LEPUS is an oil-bathed motor-reducer created for sliding gates automation. The motor-reducer irreversibility allows a perfect and safe gate closing avoiding the setup of an electrolock and in case of power
More informationMONORAIL SYSTEMS S P E C I A L I S T S I N O V E R H E A D C O N V E Y O R S
MONORAIL SYSTEMS S P E C I A L I S T S I N O V E R H E A D C O N V E Y O R S Flowcoat Bridge Crane INDEX Track 2 Load Diagram 5 Practical Values 6 Monorail 7 Bends 8 Switches 10 Turntables 17 Switch Combinations
More information