Hudevad Standard. Technical datasheet

Transcription

1 Technical datasheet

2 Key benefits $ Swedish high quality steel Highly robust and durable Pressure tested at high pressure Approved for district heating Historical Kundenedfald Highly flexible in size Huge range of dimensions for any room or space C Exceptional price/performance ratio Designed for maximum output and efficiency Temperature 2

3 Index Description... 4 Illustration... 5 Dimensions... 6 and length...6 Depth...6 Build-in dimensions... 7 ETS/DS valve systems...7 Pressure drop diagram...9 Presetting ETS/DS...9 Adjustment nomograms for two-pipe system ETS/DS Serial Output Accessories Tappings... 3

4 Description Hudevad Standard radiators in the well-known classic Danish design match perfectly in any private home, flat, office or business premise. They are ideal for for new buildings as well as for refurbishment of older buildings. Design, quality and first-class finish combined with high output and modern production processes ensure a solid, highly duranble radiator. The universal applications of the Hudevad Standard make the radiator impossible to disregard in any type of project. Material Test pressure Max. operating pressure Panels: 1.25 steel plates Steel plate for front panel cover: 1.0 Convectors: 0.5 steel plates EN 10051, EN 10130, DIN bar 10 bar Max operating temperature 95 C Surface treatment Length Depth Tappings Installation Optional extras Pre-treatment: Degreasing, washing and passivation Priming: Primed with water based paint in pale grey Surface treatment in accordance with DIN and EN , with sections in increments of 100 Length = nom. lgth. () , 355, 455, 555, 655 and 955 1P/10: 2P/20: 3P/30: 2PSL/20SL: PKP/21: 1PK/11: 2PK/22: 102 3PK/: 9 1/2 standard ETS/DS ends are 3/4 Euro cone. Wall or floor mounted (floor mounted = only PK) Brackets are included ETS/DS built-in valve (except type 2PSL/20SL) Curved and angled (only type P) Compact equipment (except types 1P/10, 3P/30 and 1PK/11) Feet Colour Powder coated in white RAL Gloss 70 Option: Painted in other standard RAL and BS colours 4

5 Illustration Hudevad Standard Cutaway 1P/10, front view 2P/20, front view 3P/30, front view 2PSL/20SL, front view PKP/21, front view 1PK/11, front view 2PK/22, front view 3PK/, front view 5

6 Dimensions Hudevad Standard and length Depth 1P/10, profile 2P/20, profile 3P/30, profile 2PSL/20SL, profile PKP/21, profile 1PK/11, profile 2PK/22, profile 3PK/, profile

7 0 Hudevad Standard Build-in dimensions Prof ile view 1P/10 2P/ E TS/DS valve systems Prof ile view 1P/ P/20 3P/ PKP/21 1PK/ PK/ PK/ PK/ PK/ PK/ PSL/20SL PKP/ P/

8 ETS built-in valve system ETS/DS ends are 3/4 Euro cone. One-pipe system Flow Return CE screw connection Two-pipe system 90 27, Recoended Flow Return Accessory 28±2 DS built-in valve system Two-pipe system Recoended Flow Return Two-pipe system, with reverse return Flow Return Accessory 8

9 Pressure drop diagram One-pipe system: Pressure drop diagram for CE screw connection Pressure drop p (mbar) Radiatorshare % 45% % 35% 30% 1 1,5 1,75 2,25 2, Pressure drop p (kpa) The lines of the diagram correspond to the number of turns of the bypass spindle (screw). Close the screw completely (right stop) and then unscrew it the number of turns required to obtain the desired radiator share. The factory-setting of the CE screw connection corresponds to a radiator share of approx. 35% Flow (l/h) Presetting ETS/DS 1. Remove the protective cap of the thermostatic sensor 2. Lift the setting ring 3. Turn the setting ring anti-clockwise until the preferred scale value aligns with the reference point 4. Let go of the setting ring Presetting can be selected between 1 and 7 in increments of 0.5. At setting N the valve is fully open. Setting in the shaded areas of the drawing above should be avoided. When the thermostatic sensor has been installed, the presetting is locked and protected against unintended adjustment. In a one-pipe system, the setting N must be used. 9

10 Adjustment nomograms for two-pipe systems ETS/DS 013G0380 For large volume flow rates RA-N RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring RED: RA-N 013G0381 For small volume flow rates RA-U [bar] [kpa] RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring YELLOW: RA-U 10

11 Serial Front view 1P/10 cutaway 2P/20 cutaway 3P/30 cutaway PKP/21 cutaway 2PK/22 cutaway 3PK/ cutaway Profile view Type 10 Type 20 Type 30 Type 21 Type 22 Type Rear view Serial Serial end-connection Serial end-flex connection 11

12 Output Hudevad Standard 1P/10 W/ W/ P/20 W/ W/ P/30 W/ W/ PSL/20SL W/ W/

13 PKP/21 W/ W/ PK/11 W/ W/ PK/22 W/ W/ PK/ W/ W/

14 Accessories Hudevad Standard Feet, bracket and spacer Adjustable PR feet with rosettes MB feet Bracket Spacer 14

15 Tappings Hudevad Standard EF centre distance = radiator length minus 67 A C B D E F Standard tappings: 1/2 ABCD Tapping variations Front view (except serial tappings) ETS/DS ends are 3/4 Euro cone. Built-in valve ETS Built-in valve ETS Built-in valve ETS Built-in valve ETS 201/ / Built-in valve ETS Built-in valve ETS Built-in valve DS Built-in valve DS 211/ / / /207 Note: Serial tappings are rear view Serial Serial Serial Serial //18/ C A C A C A C A D D D D B C Serial //18/22 A C Serial A D B D B