Hudevad Integral Hygiene

Transcription

1 Technical datasheet

2 Key benefits Historical Kundenedfald Grøn energi Swedish high quality steel Highly robust and durable Healthcare Public Sikkerhed Energi C Rengøring Panels spaced for easy access Fast and easy cleaning between panels Temperature Sleek, flat front For a clean, minimalistic look Available in many colours Easy to integrate into any interior design colour scheme 2

3 Index escription... 4 Illustration... 5 imensions... 5 Height and length...5 Profile and depth...6 Build-in dimensions... 6 ETS/S valve systems...7 Pressure drop diagram...8 Presetting ETS/S...8 Adjustment nomograms for two-pipe system ETS/S...9 Output Accessories Tappings

4 escription The Hudevad Integral Hygiene is the epitome of a rock-solid, easy-to-clean radiator. The highly durable radiator builds on the Hudevad Integral, but with more distance between the heating panels making it easy and quick to clean. Perfect for applications where thorough cleaning may otherwise be difficult. Material Test pressure Max. operating pressure Panels: 1.25 mm steel plates Steel plate for front panel cover: 1.0 mm Convectors: 0.5 mm steel plates EN 10051, EN 10130, IN bar 10 bar Max operating temperature 95 C Surface treatment Length Height epth Tappings Installation Pre-treatment: egreasing, washing and passivation Priming: Primed with water based paint in pale grey Surface treatment in accordance with IN and EN mm, with sections in increments of 100 mm Heights 255 and mm, with sections in increments of 100 mm: Heights 455, 555, 655 and 955 Length = nom. lgth. (mm) 10 mm 255, 355, 455, 555, 655 and 955 mm 2P/20: 104 mm 3P/30: 193 mm 1/2 standard Wall or floor mounted Brackets are included Optional extras ETS/S built-in valve Feet Colour Powder coated in white RAL Gloss 70 Other colours are available. Please see the Hudevad colour catalogue on. 4

5 Illustration Hudevad Integral Hygiene Cutaway 2P/20 cutaway, front view 3P/30 cutaway, front view imensions Height and length 955** 655** 555** 455** 355* 255* ** / * * for heights 255 and 355 ** for heights 455, 555, 655 and 955 5

6 epth Profile view P/20 3P/30 Build-in dimensions Profile view P/20 3P/30 6

7 ETS/S valve systems ETS/S ends are 3/4 Euro cone. ETS built-in valve system One-pipe system Flow Return CE screw connection Two-pipe system 90 27,50 Recommended Flow Return S built-in valve system Two-pipe system Accessory ±2 Recommended Two-pipe system, with reverse return Flow Return Flow Return Accessory 7

8 Pressure drop diagram One-pipe system: Pressure drop diagram for CE screw connection Pressure drop p (mbar) Radiatorshare 50% 45% 40% 35% 30% 1 1,5 1,75 2,25 2, Pressure drop p (kpa) The lines of the diagram correspond to the number of turns of the bypass spindle (screw). Close the screw completely (right stop) and then unscrew it the number of turns required to obtain the desired radiator share. The factory-setting of the CE screw connection corresponds to a radiator share of approx. 35% Flow (l/h) Presetting ETS/S 1. Remove the protective cap of the thermostatic sensor 2. Lift the setting ring 3. Turn the setting ring anti-clockwise until the preferred scale value aligns with the reference point 4. Let go of the setting ring Presetting can be selected between 1 and 7 in increments of 0.5. At setting N the valve is fully open. Setting in the shaded areas of the drawing above should be avoided. When the thermostatic sensor has been installed, the presetting is locked and protected against unintended adjustment. In a one-pipe system, the setting N must be used. 8

9 Adjustment nomograms for two-pipe systems ETS/S 013G0380 For large volume flow rates RA-N RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring RE: RA-N 013G0381 For small volume flow rates RA-U [bar] [kpa] RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring YELLOW: RA-U 9

10 Output 2P/20 Height mm W/metre 75 /65 /20 Output Water content Weight W/metre 90 /70 /20 litres/ metre kg/ metre P/30 Height mm W/metre 75 /65 /20 Output Water content Weight W/metre 90 /70 /20 litres/ metre kg/ metre Accessories Feet, bracket and spacer MB feet Bracket Spacer 10

11 Tappings Tapping designation EF centre distance = radiator length - 67 mm A C B E F Standard tappings: 1/2 ABC Tapping variations Front view (except serial tappings) ETS/S ends are 3/4 Euro cone. Built-in valve ETS Built-in valve ETS Built-in valve ETS Built-in valve ETS 201/ / Built-in valve ETS Built-in valve ETS Built-in valve S Built-in valve S 211/ / / /207 11

12 Serial Rear view C Serial Serial Serial Serial /15/18/ A C A C A C A B C Serial /15/18/22 A C Serial A B B 12