Ascotherm eco KRP91 Natural convection

Transcription

1 KRP91 Natural convection Tender specification, range available and sizes Tender specification Version KRP91 Natural Convection Ready-to-install floor pan for the floor area. Operating principle natural convection. Operating principle Cold air from the window area and cool room air drop in the floor pan. The air is heated by the heat register, becomes lighter and rises. Due to the installation in front of window areas a specific shielding against cold air is provided. For more information, see chapter "General information". Sturdy floor pan made of galvanised sheet steel, coated in anthracite grey (RAL 7016), external, adjustable and acoustically decoupled height adjustments (pre-installed). Heat register consisting of copper pipes and aluminium fins, anthracite grey (RAL7016) coated and mounted in transversal steel girders made of galvanised sheet steel, acoustically decoupled. Standard on the face or room side euro taper connection with union nut ( 3 / 4 internal thread) and air vent. Suitable for a max. operating pressure of 10 bar (optionally 16 bar) and a max. operating temperature of 110 C. Aluminium linear as standard. Acoustic decoupling through placement of the aluminium linear on rubber elements in the floor pan. Consisting of sturdy longitudinal profile bars, natural colour anodised, with profile bar dimensions of 16 x 6 mm. Grille with a total height of 20 mm and an open crosssection of 60%. Including installation cover and edge bar protection for protecting the trench convectors during the construction phase. Heat outputs tested and determined in acc. with Pr DIN EN 164, Part 1 and 2. QA system certified according to DIN EN ISO 9001:2008. Environmental management system according to DIN EN ISO 14001:2004. Suitable for closed water heating systems in accordance with DIN and water quality in accordance with VDI 2035, ÖNORM H5195 and SWKI BT Operating conditions: Hot water up to 110 C Operating pressure: Test pressure: Max. 10 bar (optionally 16 bar high-pres- sure-version) 13 bar (21 bar) Ascotherm eco KRP91 General Trench convectors find application in private residential areas, in conservatories, in offices and administration buildings, in showrooms as well as in business premises. Version KRP91 Natural Convection Connections: 2 x euro taper with union nut ( 3 / 4 internal thread), suitable for use with all fittings that comply with DIN V 3838 Air vent: installed Range available 6 depths: 185, 210, 260, 310, 360 and 400 mm 4 heights: 92, 120, 1 und 200 mm 17 lengths: from 1000 mm to 00 mm Grading 2 mm Standard: Aluminium linear Surface finishes Standard colour of floor pan, powder-coated: Anthracite grey (RAL7016 matt finish) Standard colour of linear : Aluminium anodised in natural colour Standard colour of edge bar: Aluminium, anodised in natural colour Accessories Digital room thermostat Programmable room thermostat Electric actuator 2 V AC Room thermostat with remote control Connection set, consisting of valve base with factory preset k V valve and return fitting with shut-off For additional accessories and information about accessories, see "Accessories". s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 5

2 Ascotherm KRP91 Natural convection Technical data per metre Technical data per metre Height mm Ascotherm eco KRP91 Height H Depth T Φ L T K 75/65/20 C [watts/m ribbed convector length] Φ T K 70/55/20 C [watts/m ribbed convector length] Heat output Φ T K 55/45/20 C [watts/m ribbed convector length] Φ T 25K /40/20 C [watts/m ribbed convector length] Exponent n [ ] Spec. standard water flow rate q ms [kg/h m] Mass per metre (average) M [kg/m] ,60 24,8 9, , 27,2 9, ,43 31,7 11, ,33 40,8 13, ,35 48,9 15, ,33 54,3 17, ,53,5 10, , 33,5 11, ,43 40,8 12, ,44 48,9 15, ,43 57,1 17, , 63,4 18, ,55 36,2 11, ,44 47,8 12, ,47 57,1 14, ,45 66,1 17, ,47 74,1 19, , 81,5 21, ,52 43,9 13, ,45 52,6 14, ,46 62,5 16, ,46 75,2 18, ,46 97,2 21, ,48 112,7 22,85 For individual calculations of heat outputs, see "General Information" 6 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

3 KRP91 Natural convection Dimensional drawings and connection images 2-pipe connections without integrated valve Connection system Ordering code IVTI Arrangement ANB Connection size Ordering code VG RG Additional price per radiator 2-pipe, room side, side by side 2-pipe, on the face side, side by side 2 BB DD Euro taper with union nut internal thread 3 / Ascotherm eco KRP91 Special connection 66/ 88 2-pipe, facing down, side by side 2 The accessories range does not contain any connection sets with preset valves for the connection arrangements 66 and 88; however, these can be installed at the factory with appropriate notification when ordering. Valve base with factory preset k v valve = Outflow 3 / 4 external thread with euro taper, inflow 1 / 2 internal thread; return fitting with shut-off: both sides 3 / 4 external thread with euro taper On request Dimensional drawings KRP91 Connection BB/DD Side view from left Front view Side view from right T H1 H T-33 H3 H L Ø19 Ø33 Top view Lber. ribb. Dimensional drawings for connection BB, connection DD mirrored T H H1 H2 H s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 7 L L ribb. up to 00 L over 00 L - 360

4 KRP91 Natural convection Dimensional drawings and connection images Dimensional drawings KRP91 Connections 11/33 Side view from left Front view Side view from right T Ascotherm eco KRP91 H1 T-33 Ø33 L H T2 Top view L ribb. ber. H2 H3 T1 NA Ø19 Dimensional drawings for connection 11, connection 33 mirrored T H H1 H2 H T T1 T2 Boss spacing , , L L ribb. up to 00 L over 00 L Pressure loss diagram for heights 92 and 120 mm Pressure loss diagram for heights 1 and 200 mm T 185, T 210 Pressure loss p [mbar/m ribbed convector length] T 185, T 210 T 260 T 310 T 400 T 360 Pressure loss p [mbar/m ribbed convector length] T 260 T 310 T 400 T Water flow q m [kg/h] Water flow q m [kg/h] 8 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

5 KRP91 Natural convection s and heat outputs Height 92 mm (depth mm) Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,60 1, 1,43 per piece [EUR/pc.] 87,14 119,18 124,15 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,12 LR: Aluminium linear, natural colour anodised (standard) with linear 204,04 200,26 291,18 228,54 3,19 256,82 393,20 285,10 444,21 313,38 495,22 341,66 546,23 369,94 597,24 398,22 648,25 6, 699,26 454,78 7,27 483,06 801,28 511,34 852,29 539,62 903, 567,90 954,31 596, ,32 624, ,33 652, ,34 without linear Φ [watts] ,60 with linear 256,25 279,78 375,43 319,93 439,49 360,08 3,56 400,23 567,62 440,38 631,68 480,53 695,74 520,68 759,81 560,83 823,87 600,98 887,93 641,13 951,99 681, ,06 721, ,12 761, ,18 801, ,24 841, ,31 882, ,37 922, ,43 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,09 with linear 269,72 285,24 393,87 325,51 461, 365,79 528,73 406,06 596,16 446,33 663,59 486,60 731,02 526,88 798,45 567,15 865,88 607, 933,31 647, ,74 687, ,17 728, ,60 768, ,03 808, ,46 849, ,89 889, ,32 929, ,75 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 9

6 KRP91 Natural convection s and heat outputs Height 92 mm (depth mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,33 1,35 1,33 per piece [EUR/pc.] 141,38 157,62 164,92 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,49 LR: Aluminium linear, natural colour anodised (standard) with linear 299,74 8,87 441,12 3,74 516,06 392,62 590,99 434,49 665,93 476,36 740,86 518,23 815,80 560,11 890,73 601,98 965,67 643, ,60 685, ,54 727, ,47 769, ,41 811, ,34 853, ,28 895, ,21 936, ,15 978, ,08 without linear Φ [watts] ,53 with linear 361,95 373,15 519,57 7,03 610,06 480,92 700,55 534,80 791,03 588,68 881,52 6,56 972,01 696, , 7, ,98 804, ,47 858, ,96 911,98 14,45 965, , , , 1073, , , , , , , ,37 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,51 with linear 370,85 378,43 535,77 431,81 628,48 485,19 721,20 538,56 813,91 591,94 906,62 645,32 999,33 698, ,05 752, ,76 805, ,47 858, ,18 912, ,90 965, , , , , , , , , , , ,17 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 10 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

7 KRP91 Natural convection s and heat outputs Height 120 mm (depth mm) Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,53 1, 1,43 per piece [EUR/pc.] 110,52 144,49 156,95 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,56 LR: Aluminium linear, natural colour anodised (standard) with linear 228,48 248,08 339,00 282,47 396,12 316,86 453,24 351,25 510,36 385,64 567,48 0,03 624,60 454, 681,72 488,81 738,84 523,20 795,96 557,59 853,08 591,98 910,20 626,37 967,32 660, ,44 695, ,56 729, ,68 763, ,80 798, ,92 without linear Φ [watts] ,33 with linear 288,98 337,82 433,47 386,15 5,72 434,49 577,96 482,82 6,21 531,15 722,45 579,48 794,70 627,82 866,94 676,15 939,19 724, ,43 772, ,68 821, ,92 869, ,17 917,81 10,41 966, , , , , , , ,39 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,46 with linear 3,09 351,41 460,04 400,03 535,81 448,64 611,59 497,26 687,36 545,87 763,13 594,49 838,90 643,10 914,68 691,72 990,45 740, ,22 788, ,99 837, ,77 886, ,54 934, ,31 983, , , , , , , ,40 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 11

8 KRP91 Natural convection s and heat outputs Height 120 mm (depth mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,44 1,43 1, per piece [EUR/pc.] 181,95 216,91 227,76 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,69 LR: Aluminium linear, natural colour anodised (standard) with linear 333,94 383,64 515,89 434,06 599,38 484,49 682,86 534,91 766,35 585,33 849,83 635,75 933,32 686, ,80 736, ,29 787, ,77 837, ,26 887,87 13,74 938, ,23 988, , , , , , , , , ,65 without linear Φ [watts] ,08 with linear 391, 461,99 608,41 523,26 706,29 584,53 804,16 645,80 902,04 707,07 999,91 768, ,79 829, ,66 890, ,54 952, , , 1489, , , , , , , , 1880, , , , ,54 14, ,41 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,07 with linear 410,41 480,83 638,17 544,10 740,77 607,37 843,38 670,63 945,98 733, ,58 797, ,18 860, ,79 923, ,39 986, ,99 10, , , , , , , ,40 13, , , ,61 19, , , ,81 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 12 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

9 KRP91 Natural convection s and heat outputs Height 1 mm (depth mm) Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,55 1,44 1,47 per piece [EUR/pc.] 116,05 151,76 159,71 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,80 LR: Aluminium linear, natural colour anodised (standard) with linear 247,72 272,85 363,77 312,05 5,70 351,25 487,63 390,45 549,56 9,65 611,49 468,85 673, 8,05 735,35 547,25 797,28 586,45 859,21 625,65 921,14 664,85 983,07 704, ,00 743, ,93 782, ,86 821,65 12,79 860, ,72 900, ,65 without linear Φ [watts] ,94 with linear 9,59 365,70 461,35 419,19 538,75 472,67 616,15 526,16 693,54 579,64 770,94 633,13 848,34 686,61 925,74 740, ,13 793, ,53 847, ,93 900, ,33 954, , , , , , , , , , , ,71 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,79 with linear 319, 370, 479,13 3,20 558,99 475,90 638,84 528,59 718,70 581,29 798,55 633,99 878,41 686,69 958,26 739, ,12 792, ,97 844, ,83 897, ,68 9, , , , , , , , , , , ,81 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 13

10 KRP91 Natural convection s and heat outputs Height 1 mm (depth mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,45 1,47 1, per piece [EUR/pc.] 188,35 223,23 234,40 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,22 LR: Aluminium linear, natural colour anodised (standard) with linear 352,47 408,57 540,82 463,63 628,94 518,68 717,06 573,74 805,17 628,79 893,29 683,85 981,41 738, ,53 793, ,64 849, ,76 904, ,88 959,12 12, , , , , , , , , , , ,45 19,70 without linear Φ [watts] ,20 with linear 411,62 488,43 634,85 554,73 737,76 621,03 840,66 687,33 943,57 753, ,47 819, ,38 886, ,28 952, , , , , , , , , , , ,71 13, , , , , , , ,33 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,74 with linear 431,08 8,14 665,48 576,58 773,25 645,01 881,02 713,45 988,79 781, ,56 8, ,33 918, ,10 987, , , , , , , , ,93 18, , , , , , , , , , ,80 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 14 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

11 KRP91 Natural convection s and heat outputs Height 200 mm (depth mm) Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,52 1,45 1,46 per piece [EUR/pc.] 116,05 151,34 163,35 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,53 LR: Aluminium linear, natural colour anodised (standard) with linear 264,45 289,58 380, 332,96 446,61 376,35 512,73 419,73 578,84 463,11 644,95 6,49 711,06 549,88 777,18 593,26 843,29 636,64 909,40 680,02 975,51 723, ,63 766, ,74 810, ,85 853, ,96 896,94 16,08 940, ,19 983, , without linear Φ [watts] ,47 with linear 320,12 375,81 471,46 431,93 551,49 488,05 631,52 544,16 711,55 600,28 791,58 656,40 871,61 712,52 951,64 768, ,67 824, ,70 880, ,73 936, ,76 993, , , , , , , , , , , ,94 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] , with linear 332,13 386,85 495,48 4,73 578,51 498,60 661,55 554,48 744,58 610,35 827,61 666,23 910,64 722,10 993,68 777, ,71 833, ,74 889,73 12,77 945, , , , , , , , , , , , , ,00 Ascotherm eco KRP91 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 15

12 KRP91 Natural convection s and heat outputs Height 200 mm (depth mm) Ascotherm eco KRP91 Version KRP91 KRP91 KRP91 Depth T Exponent n [ ] 1,46 1,46 1,48 per piece [EUR/pc.] 190,57 223,23 234,40 per metre [EUR/m] Length L Ribbed convector length Lribb T [K] without linear Φ [watts] ,37 LR: Aluminium linear, natural colour anodised (standard) with linear 362,62 0,94 553,19 478,53 643,85 536,13 734, 593,72 825,16 651,31 915,81 708, ,47 766, 1097,12 824, ,78 881, ,43 939, ,09 996, , ,46 15, , , , , , , , ,02 13, 2003,67 without linear Φ [watts] ,27 with linear 4,69 1, 647,92 571,07 754,09 640,64 860,27 710,20 966,44 779, ,61 849, ,78 918, ,96 988, , , , 1127, , , , , , , , , , , , , , , ,68 Ribbed convector length = length floor pan mm, for length > 00 mm: length floor pan mm without linear Φ [watts] ,81 with linear 444,15 521,21 678,55 592,91 789,59 664,62 900,63 736, ,66 808, ,70 879, ,74 951, , , , , , , , , ,93 19, , , , , , , , , , , ,15 Standard heat output at 75 / 65 / 20 C ( T K), Φ=Φ S 16 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

13 Product details The new connection sets with factory preset k V valves Connection sets for the Ascotherm eco It is recommended that the Ascotherm eco be fitted with preset k v connection sets (see accessories range). On request, the installation can be done at the factory. The Ascotherm eco units are fitted with preset connection sets depending on the heating or cooling capacity. Ascotherm eco units can also be fitted with the fine-adjusting valve. The adjustable valve insert permits reproducible settings of low water flow rates. The setting values can be taken from the diagram. Control curves for valve inserts Standard valve insert V5K S Presetting 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,56 8 k vs value up to 0,16 0,21 0,24 0, 0,34 0,41 0,44 0,54 0,65 0,82 0,98 1,11 1,23 1,33 1,43 Pressure loss in mbar ,5 2,5 3,5 4,5 5,5 6,5 7,5 7 8 Product details Water flow in kg/h s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 65

14 Product details The new connection sets with factory preset k V valves Valve performance limits of valve inserts for the Ascotherm eco connection sets Please note the valve performance limits in relation to the system parameters Standard valve insert V5K S Product details Presetting k vs value 1 0,16 1,5 0,21 2 0,24 2,5 0, 3 0,34 3,5 0,41 4 0,44 4,5 0,54 5 0,65 5,5 0,82 6 0,98 6,5 1,11 7 1,23 7,5 1,33 8 1,43 Δp [mbar] Temperature difference ΔT [K] s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

15 Product details The new connection sets with factory preset k V valves Fine-adjusting valve insert V5K F Presetting 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5 7 7,56 8 k vs value up to 0,06 0,06 0,07 0,07 0,08 0,09 0,1 0,11 0,12 0,15 0,17 0,21 0,25 0,37 0,5 Pressure loss in mbar Product details ,5 2,5 3,5 4,5 5,5 6,5 7, Water flow in kg/h s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 67

16 Product details The new connection sets with factory preset k V valves Valve performance limits of valve inserts for the Ascotherm eco connection sets Please note the valve performance limits in relation to the system parameters Fine-adjusting valve insert V5K F Product details Presetting k vs value 1 0,06 1,5 0,06 2 0,07 2,5 0,07 3 0,08 3,5 0,09 4 0,10 4,5 0,11 5 0,12 5,5 0,15 6 0,17 6,5 0,21 7 0,25 7,5 0,37 8 0, Δp [mbar] Temperature difference ΔT [K] s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

17 Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KRP91 H T L Preset k V values ,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 12 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 2,5 10 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 17 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5 5,5* 5,5* 2,5 5,5* 5,5* 2,5 2,5 2,5 2, ,5* 5,5* 5,5* 5,5* 5,5* 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 4,5 22 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 4,5 4,5 20 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,5 4,5 27 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 00 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 32 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 2,5 2,5 2,5 2,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 5,5* 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 6,0 37 5,5* 2,5 2,5 2,5 2,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 6, ,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 6,0 6,0 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 6,0 6,0 40 2,5 2,5 2,5 2,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 4,5 6,0 2,5 4,5 4,5 4,5 6,0 6,0 47 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 4,5 6,0 4,5 4,5 4,5 4,5 6,0 6,0 00 2,5 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 2,5 4,5 4,5 4,5 6,0 6,0 4,5 4,5 4,5 6,0 6,0 6,0 * Fine-adjusting valve Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar Product details s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 69

18 Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KRN92 H T L Preset k V values ,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 12 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 10 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 17 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 5,5* 2,5 2, ,5* 5,5* 5,5* 5,5 5,5 5,5 5,5* 5,5* 5,5* 5,5* 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 22 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 20 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 27 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 00 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 32 5,5* 5,5* 5,5* 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 4,5 4,5 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 2,5 4,5 5,5* 5,5* 2,5 2,5 4,5 4,5 37 5,5* 5,5* 2,5 2,5 2,5 2,5 5,5* 5,5* 2,5 2,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4, ,5* 5,5* 2,5 2,5 2,5 4,5 5,5* 5,5* 2,5 2,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 40 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 2,5 2,5 4,5 4,5 4,5 47 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 5,5* 2,5 4,5 4,5 4,5 2,5 2,5 2,5 4,5 4,5 4,5 Product details 00 5,5* 5,5* 2,5 4,5 4,5 4,5 5,5* 2,5 2,5 4,5 4,5 4,5 2,5 2,5 4,5 4,5 4,5 4,5 * Fine-adjusting valve Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar 70 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

19 Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KRN81 H 110 T L Preset k V values 12 2,5 2,5 2,5 2,5 4,5 10 2,5 2,5 2,5 2,5 4,5 17 2,5 2,5 4,5 4,5 4, ,5 4,5 4,5 4, ,5 4,5 4,5 4, ,5 4, , , , Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar Product details s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 71

20 Product details The new connection sets with factory preset k V valves Factory k V presetting of the valves KC 281 H T L Preset k V values * 0* 0* 0* 27 0* 0* 0* 0* Note: On the KC2 81, the valve inserts are preset in relation to the cooling capacity, since the water flow rate required for cooling is usually higher than for heating. Dimensioning: Cooling capacities at 16 / 18 / 27 C, Pressure loss across the valve 100 mbar KC 481 H T L Preset k V values * 0* 0* 0* 27 0* 0* 0* 0* Product details Dimensioning: Cooling capacities at 16 / 18 / 27 C, Pressure loss across the valve 100 mbar KC 481 H T L Preset k V values 12 4,5 4,5 4,5 4, * 8 0* Dimensioning: Heat outputs at 70 / 55 / 20 C, Pressure loss across the valve 100 mbar * Wherever kv preset values are stated as 0, the maximum convector outputs are above the valve performance limits for the indicated system parameters. In this case, it is necessary to check whether the dimensioned output is within the valve performance limits. See data under valve performance limits. 72 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

21 Arbonia Individual Special versions Angled version Available for all versions and for empty pan Angle can be between and 320 Please provide a dimensional drawing or template with the order. Feasibility depends on engineering review Radiator must still be transportable Dimensional drawing Ordering code BES Floor pan Additional price / bevel cut Linear Roll-up WA T L2 L1 T W A L2 90 Single bevel L ) 49,00 46,00 164,00 L2 T WA L1 L2 T WA α L1 α 1) Characteristic 77 for bevel cut at both ends L1, L2: Length of the limbs, measured on the wall α: Angle T: Depth floor pan WA: Wall spacing Ascotherm eco Individual s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 73

22 R Ascotherm eco Arbonia Individual Special versions Curved version Available for KRP91 (other versions on request) Bending radius R: at least 1000 mm Please provide a dimensional drawing or template with the order. Feasibility depends on engineering review Radiator must still be transportable Dimensional drawing Ordering code BES Additional price per radiator L R T WA Inside radius 70 On request L WA T Ascotherm eco Individual L: Streched length R: Bending radius (wall radius) T: Depth floor pan WA: Wall spacing Outside radius 74 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

23 Arbonia Individual Special versions Column section version Available for all versions and for empty pan Please provide a dimensional drawing or template with the order. Feasibility depends on engineering review Radiator must still be transportable Dimensional drawing Column section according to drawing column section in floor pan column section in linear column section in roll-up Ordering code IBESI Additional price per column section Floor pan Linear Roll-up Ød A 75 On request On request On request Ascotherm eco Individual C Ød C Ød A A C C C C A B A B A B d: Diameter A: Inset dimension for length B: Edge dimension C: Inset dimension for depth s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 75

24 Arbonia Individual Special versions Version with impact sound insulation Without impact sound insulation With impact sound insulation Description Standard version Ordering code IEBTI Additional price per metre TS1 39,00 Impact sound insulation 4 mm Coupled Ascotherm radiators are supplied individually Connection material (flexible connection hoses etc. available as accessory) Only for versions KRP91 (not for H 1 and H 200), KRN92, KRN81 On version KRN81 (max. up to 4 motors) without Connection system Connection on the same side from the left Description Radiator position 2 repeats when coupling more than 3 radiators Please provide a drawing with the order Initial radiator 1 Middle radiator 2 Final radiator 3 Ordering code KHP Sequence of coupled radiatorsδ(enter in column "Special characteristics") Additional price per radiator Ascotherm eco Individual Connection on the same side from the right Radiator position 2 repeats when coupling more than 3 radiators Please provide a drawing with the order Final radiator 3 Middle radiator 2 Initial radiator ,00 76 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

25 Arbonia Individual Special versions Air connection with air connection valve Number of air connections LAZ Length Description and dimensional drawings 1 00 mm Standard: 1 air connection, incl. air valve Additional air connections possible (max. number and location on request) Air connections are distributed evenly (to the extent technically possible) The exact positioning of the air connections can be seen in the drawing Air connection arrangement LAP 1) Height H Connection size LAG Additional price per additional connection 110, 1, ,00 1, , , ,00 2 > 00 mm Standard: 2 air connections, incl. air valves Additional air connections possible (max. number and location on request) Air connections are distributed evenly (to the extent technically possible) The exact positioning of the air connections can be seen in the drawing Special connections - Version per drawing - LAP = SON No clear assignment of positions, since floor pan joined at the factory 110, 1, ,00 1, , , ,00 On request 1) The positioning of the air connections is affected slightly by the arrangement of the cross bracing in the floor pan, example: connection F (room side, centred) = "approx. centred" The exact dimensions/positions can be seen in the drawing and need to be approved by the customer. Number and positions of the air connections L/2 ±75 L/2 ±75 L 00 L/4 ±1 L/4 ±1 L > 00 Ascotherm eco Individual s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 77

26 Arbonia Individual Special versions Additional special versions Pressure version Description High-pressure version Characteristic Ordering code Additional price per radiator 16 bar (1600 kpa) DRU % Special versions Special length for heating 1) > 1000 mm (KRP91 and KRN92) > 12 mm possible (KRN81) Special length for heating and cooling 1) BES SBL Next-larger standard length > 12 mm possible BES SBL On request Extra-short length (smaller than smallest standard length) 600 mm - < 1000 mm possible (KRP91 and KRN92) 1000 mm - < 12 possible (KRN81) 8 mm - < 12 mm possible (KC281) 10 mm - < 12 mm possible (KC481) BES SBL On request Special depth acc. to drawing 2) BES SBT On request Special height according to drawing 3) BES SBH On request Fixing Fixing with special bracket (in case of high soil structure) On request Special finish 1) Provide exact length 2) Provide exact depth 3) Provide exact height Finished in special colour (no RAL colour) Aluminium linear / aluminium roll-up AUS SF On request Floor pan and register FAR1 99 On request Finished in other RAL colour (standard is RAL 7016) Floor pan and register FAR1 SF + % Ascotherm eco Individual 78 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.

27 Ascotherm eco Individual On request, accessory components, available factory-installed Available on request Edge bar Description Anodised in natural colour ELO = Anodised in natural colour RDL ELO Colour anodised BRO = Anodised in bronze finish MES = Anodised in brass finish DKS = Anodised in dark silver finish SWZ = Anodised in black finish EDS = Anodised in stainless steel finish Paint finish FAR1 = Edge bar finished as floor pan/register RDL FAR1 RDL Characteristic Ordering code BRO MES DKS SWZ EDS Additional price per metre 11,00 11,00 11,00 11,00 11,00 FAR2 = Edge bar finished as top RDL FAR2 49,00 Air-intake filter For KRN81 air-intake filter PPI dark 90 x 3 mm FVL FV 8,00 For KC281 and KC481 air -ntake filter PPI dark 140 x 3 mm FVL FV 9,00 Accessory components, factory-installed Description Characteristic Ordering code Additional price per radiator Installation Connection set, straight form with preset k v valve Consisting of: Valve base with factory preset kv valve DN 15, both sides 3 / 4 external thread with euro taper M x 1,5 nickel-plated, protective cap Return fitting with shut-off DN 15, both sides 3 / 4 external thread with euro taper nickel-plated Threaded fitting attached only hand-tight For all KRN, KRP91 and KC281 with connection 11 or 33 For KC481 with connection 11 or 33 VRS VRS 44,00 VRS VRS 88,00 Connection set, angled version with preset k v valve Consisting of: Valve base with factory preset kv valve DN 15, both sides 3 / 4 external thread with euro taper M x 1,5 nickel-plated, protective cap Return fitting with shut-off DN 15, both sides 3 / 4 external thread with euro taper nickel-plated Threaded fitting attached only hand-tight For KC281 with connection BB or DD For KC481 with connection BB or DD VRS VRS 44,00 VRS VRS 88,00 Connection set, angled version with preset k v valve, connection arrangement 66/88 Consisting of: Valve base with factory preset kv valve DN 15, outlet 3 / 4 external thread with euro taper, inlet 1 / 2 internal thread M x 1,5 nickel-plated, protective cap Return fitting with shut-off DN 15, both sides 3 / 4 external thread with euro taper nickel-plated Threaded fitting attached only hand-tight For KRP91, KRN92 and KRN81 VRS VRS 44,00 Ascotherm eco Individual Thermoelectric actuator 2 V AC Factory-installed Only in conjunction with VRS For KRP91 and KRN92 STT STT 29,00 Thermoelectric actuator 24 V DC Factory-installed and with controller board wired Only in conjunction with VRS For KRN81 and KC281 STT STT 92,00 For KC481 STT STT 184,00 KNX plugin card (for KRN81, KC281 and KC481) for installation in the Ascotherm eco control board to connect to KNX networks, only 1 per convector group is needed (up to 6 convectors) For KRN81, KC281 and KC481 GLT KNX 146,00 s without value-added tax. Technical specifications subject to change.s and Technology 2015-N 79

28 Accessories Empty floor pan Ascotherm eco empty floor pan For the... Arbonia offers an Ascotherm empty floor pan in its accessories range. The range available (H / B / T) and the special or extra-short empty floor pan lengths are listed at the individual versions. Accessories Description Product code Empty floor pan ZA0108 Characteristic Dimensions Heights: 92, 110, 120, 1, 1, 155, 200 mm Depths: 185, 210, 260, 310, 3, 360, 400 mm Lengths variable: mm Finish Standard in anthracite grey (RAL 7016 matt finish) Top version Standard in aluminium, anodised in natural colour Material Galvanised sheet steel, colour-coated Dimensions Ordering code Product Version Ordering code 3 1) Dimensions HOE and MT need to be stated with the order (for description, see chapter "General information") s for other colours, see chapter "Ascotherm top s" and "Special versions". per piece [EUR/pc.] per metre without [EUR/m] per metre with [EUR/m] per metre without [EUR/m] ZA , 89,04 179,96 179, ) 111, 100,17 195,82 195, , 111, 219,93 219, , 122,43 254,68 254, , 133,56 279,98 279, , 144,69 2,03 2, ZA , 100,17 191,09 191, ) 111, 111, 206,95 206, , 122,43 231,06 231, , 133,56 265,81 265, , 144,69 291,11 291, , 155,82 313,16 313, ZA0108 1) 111, 100,17 271,38 271, , 111, 282,62 282, , 122,43 296,68 296, , 133,56 191,09 191, , 144,69 206,95 206, , 155,82 231,06 231, ZA0108 1) 111, 139,13 265,81 265, , 144,70 291,11 291, , 1,26 313,16 313, ZA , 111, 202,22 202, ) 111, 122,43 218,08 218, , 133,56 2,19 2, , 144,69 276,94 276, , 155,82 2,24 2, , 166,95 324,29 324, ZA , 1,26 282,51 282,51 3 1) 111, 155,83 293,75 293, , 161,40 7,82 7, ZA , 122,43 213,35 213, ) 111, 133,56 229,21 229, , 144,69 253,32 253, , 155,82 288,07 288, , 166,95 313,37 313, , 178,08 335, 335, 80 s and Technology 2015-N s without value-added tax. Technical specifications subject to change.