Hudevad Flat Front. Technical datasheet

Transcription

1 Technical datasheet

2 Key benefits $ Completely sealed casing Clean and tamper-proof design Pressure tested at high pressure Approved for district heating Historical Kundenedfald Highly flexible in size Huge range of dimensions for any room or space Healthcare Public Sikkerhed C Exceptional price/performance ratio Designed for maximum output and efficiency Temperature 2

3 Index Description... 4 Illustration... 5 Dimensions... 6 Height and length...6 Depth...6 Build-in dimensions... 7 ETS/DS valve systems...7 Pressure drop diagram...9 Presetting ETS/DS...9 Adjustment nomograms for two-pipe system ETS/DS Serial Output Accessories Tappings

4 Description Hudevad Flat Front is a radiator which fits into any modern accommodation whether it is for living areas, business facilities or schools etc. The Scandinavian style flat front makes this radiator a timeless heating solution giving an excellent output yet discreet appearance. Hudevad Flat Front is factory fitted with side panels and top grille. Material Test pressure Max. operating pressure Panels: 1.25 mm steel plates Steel plate for front panel cover: 1.0 mm Compact equipment: 0.8 mm steel plates Convectors: 0.5 mm steel plates EN 10051, EN 10130, DIN bar 10 bar Max operating temperature 95 C Surface treatment Length Height Depth Tappings Installation Optional extras Pretreatment: Degreasing, washing and passivation Priming: Primed with water based paint in pale grey Surface treatment in accordance with DIN and EN mm, with sections in increments of 100 mm: Heights 255 and mm, with sections in increments of 100 mm: Heights 455, 555, 655 and 955 Length = nom. lgth. (mm) - 10 mm 255, 355, 455, 555, 655 and 955 mm 2P/20: mm 2PSL/20SL: 64 mm PKP/21: mm 2PK/22: 106 mm 3PK/33: 163 mm 1/2 standard ETS/DS ends are 3/4 Euro cone Wall or floor mounted (floor mounted = only PK) Brackets are included ETS/DS built-in valve (except type 2PSL/20SL) Feet Colour Powder coated in white RAL Gloss 70 Option: Painted in other standard RAL and BS colours 4

5 Illustration Hudevad Flat Front Cutaway 2P/20, front view 2PSL/20SL, front view PKP/21, front view 2PK/22, front view 3PK/33, front view 5

6 Dimensions Hudevad Flat Front Height and length 955** 655** 555** 455** 355* 255* ** / * * for heights 255 and 355 ** for heights 455, 555, 655 and 955 Depth 2P/20, profile view 2PSL/20SL, profile view PKP/21, profile view 64 2PK/22, profile view 106 3PK/33, profile view 163 6

7 Hudevad Flat Front Build-in dimensions Profile view 2P/20 2PSL/20SL PKP/21 2PK/ PK/ E TS/DS valve systems Profile view 1P/ P/20 3P/ PKP/ PK/ PK/ PK/

8 ETS built-in valve system ETS/DS ends are 3/4 Euro cone. One-pipe system Flow Return CE screw connection Two-pipe system 90 27,50 Recommended Flow Return Accessory ±2 DS built-in valve system Two-pipe system Recommended Flow Return Two-pipe system, with reverse return Flow Return Accessory 8

9 Pressure drop diagram One-pipe system: Pressure drop diagram for CE screw connection Pressure drop p (mbar) Radiatorshare 50% 45% % 35% 30% 1 1,5 1,75 2,25 2, Pressure drop p (kpa) The lines of the diagram correspond to the number of turns of the bypass spindle (screw). Close the screw completely (right stop) and then unscrew it the number of turns required to obtain the desired radiator share. The factory-setting of the CE screw connection corresponds to a radiator share of approx. 35% Flow (l/h) Presetting ETS/DS 1. Remove the protective cap of the thermostatic sensor 2. Lift the setting ring 3. Turn the setting ring anti-clockwise until the preferred scale value aligns with the reference point 4. Let go of the setting ring Presetting can be selected between 1 and 7 in increments of 0.5. At setting N the valve is fully open. Setting in the shaded areas of the drawing above should be avoided. When the thermostatic sensor has been installed, the presetting is locked and protected against unintended adjustment. In a one-pipe system, the setting N must be used. 9

10 Adjustment nomograms for two-pipe systems ETS/DS 013G0380 For large volume flow rates RA-N RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring RED: RA-N 013G0381 For small volume flow rates RA-U [bar] [kpa] RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring YELLOW: RA-U 10

11 RIOpanel Seriel RIOpanel PlanPlan Seriel Serial Front view set2p/20 forfra cutaway PKP/21 cutaway Hudevad Flat Front set for RIOpanel Seriel Opanel Plan Plan Seriel et forfra 2PK/22 cutaway 3PK/33 cutaway RIOpanel Plan Seriel - profil RIOpanel Plan Seriel - profil Indbygningsmål Indbygningsmål Indbygningsmål Indbygningsmål Profile view - profil Type 2P/20 Type PKP/21 Type 2PK/ Type 3PK/ Rear view Serial Serial end-connection Serial end-flex connection 11

12 Output Hudevad Flat Front 2P/20 Height mm 2PSL/20SL 75 /65 /20 Output Water content Weight 55 /45 /20 90 /70 /20 litres/ kg/ Height mm PKP/21 Height mm 75 /65 /20 75 /65 /20 Output Water content Weight 55 /45 /20 Output Water content Weight 55 /45 /20 90 /70 /20 90 /70 /20 litres/ litres/ kg/ kg/ PK/22 Height mm 75 /65 /20 Output Water content Weight 55 /45 /20 90 /70 /20 litres/ kg/

13 3PK/33 Height mm 75 /65 /20 Output Water content Weight 55 /45 /20 90 /70 /20 litres/ kg/ Accessories Feet, bracket and spacer Adjustable PR feet MB feet Bracket Spacer 13

14 Tappings Hudevad Flat Front Tapping designations EF centre distance = radiator length minus 67 mm A C B D E F Standard tappings: 1/2 ABCD Tapping variations ETS/DS ends are 3/4 Euro cone, middle connections (211/213 and 212/214) are 1/2 Euro cone. Built-in valve ETS Built-in valve ETS Built-in valve ETS Built-in valve ETS 201/ / Built-in valve ETS Built-in valve ETS DS DS 211/ / / /207 Note: Serial tappings are rear view Serial Serial Serial Serial /15/18/ C A C A C A C A D D D D B C Serial /15/18/22 A C Serial A D B D B 14