Hudevad Standard Hygiene

Transcription

1 Technical datasheet

2 Key benefits Historical Kundenedfald Grøn energi Swedish high quality steel Highly robust and durable Rengøring Panels spaced for easy access Fast and easy cleaning between panels Highly flexible in size Huge range of dimensions for any room or space Available in many colours Easy to integrate into any interior design colour scheme 2

3 Index escription... 4 Illustration... 5 imensions... 5 Height and length...5 epth...5 Build-in dimensions... 6 ETS/S valve systems...7 Pressure drop diagram...8 Presetting ETS/S...8 Adjustment nomograms for two-pipe system ETS/S...9 Output Accessories Tappings

4 escription Hudevad Standard Hygiene is the sturdy, hygienic solution for any hygiene-focused establishment. The radiator has all the reliability and key benefits as the Hudevad Standard, but the Hudevad Standard Hygiene is optimised for easy cleaning and maintenance access. Material Test pressure Max. operating pressure Panels: 1.25 mm steel plates Steel plate for front panel cover: 1.0 mm Convectors: 0.5 mm steel plates EN 10051, EN 10130, IN bar 10 bar Max operating temperature 95 C Surface treatment Length Height epth Tappings Installation Optional extras Pre-treatment: egreasing, washing and passivation Priming: Primed with water based paint in pale grey Surface treatment in accordance with IN and EN mm, with sections in increments of 100 mm Length = nom. lgth. (mm) 10 mm 255, 355, 455, 555, 655 and 955 mm 2P/20: 103 mm 3P/30: 192 mm 1/2 standard ETS/S ends are 3/4 Euro cone. Wall or floor mounted (floor mounted = only PK) Brackets are included ETS/S built-in valve Curved and angled Feet Colour Powder coated in white RAL Gloss 70 Other colours are available. Please see the Hudevad colour catalogue on. 4

5 Illustration Hudevad Standard Hygiene Cutaway 2P/20, front view 3P/30, front view imensions Height and length epth 2P/20, profile 3P/30, profile

6 Build-in dimensions Hudevad Standard Hygiene Profile view 2P/20 3P/ ETS/S valve systems Profile view 2P/20 3P/

7 ETS built-in valve system ETS/S ends are 3/4 Euro cone. One-pipe system Flow Return CE screw connection Two-pipe system 90 27,50 Recommended Flow Return Accessory ±2 S built-in valve system Two-pipe system Recommended Flow Return Two-pipe system, with reverse return Flow Return Accessory 7

8 Pressure drop diagram One-pipe system: Pressure drop diagram for CE screw connection Pressure drop p (mbar) Radiatorshare 50% 45% 40% 35% 30% 1 1,5 1,75 2,25 2, Pressure drop p (kpa) The lines of the diagram correspond to the number of turns of the bypass spindle (screw). Close the screw completely (right stop) and then unscrew it the number of turns required to obtain the desired radiator share. The factory-setting of the CE screw connection corresponds to a radiator share of approx. 35% Flow (l/h) Presetting ETS/S 1. Remove the protective cap of the thermostatic sensor 2. Lift the setting ring 3. Turn the setting ring anti-clockwise until the preferred scale value aligns with the reference point 4. Let go of the setting ring Presetting can be selected between 1 and 7 in increments of 0.5. At setting N the valve is fully open. Setting in the shaded areas of the drawing above should be avoided. When the thermostatic sensor has been installed, the presetting is locked and protected against unintended adjustment. In a one-pipe system, the setting N must be used. 8

9 Adjustment nomograms for two-pipe systems ETS/S 013G0380 For large volume flow rates RA-N RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring RE: RA-N 013G0381 For small volume flow rates RA-U [bar] [kpa] RA 2000 at a P band between 0.5 K and 2 K Characteristic: Presetting ring YELLOW: RA-U 9

10 Output Hudevad Standard Hygiene 2P/20 Height mm W/metre 75 /65 /20 Output Water content Weight W/meter 55 /45 /20 W/metre 90 /70 /20 litres/ metre kg/ metre P/30 Height mm W/metre 75 /65 /20 Output Water content Weight W/meter 55 /45 /20 W/metre 90 /70 /20 litres/ metre kg/ metre Accessories Feet, bracket and spacer MB feet Bracket Spacer 10

11 Tappings Hudevad Standard Hygiene EF centre distance = radiator length minus 67 mm A C B E F Standard tappings: 1/2 ABC Tapping variations Front view (except serial tappings) ETS/S ends are 3/4 Euro cone. 201/ / Built-in valve S Built-in valve S 211/ / / /207 Note: Serial tappings are rear view Serial Serial Serial Serial /15/18/ C A C A C A C A B C Serial /15/18/22 A C Serial A B B 11