LST-Rad Radiators AEL PlanRad &

Transcription

1 AEL PlanRad Flat Face, High Output Central Heating Radiators & AEL LST-Rad Low Surface Temperature Radiators October 2004 LST-Rad Radiators AEL PlanRad &

2 Section 1 AEL PlanRad Flat face, High Output Central Heating Radiators. Fabricated from high grade, mild steel plate, AEL PlanRad radiators are of the smooth flat face panel concept and are suitable for commercial, industrial and domestic applications. They are high performance, high output heat emitters delivering both natural convection and radiant warmth, and are designed for use within indirect central heating systems. They are not suitable for use within direct hot water systems. The hot water supply flows with ease through unrestricted, corrugated, rear ribbed sections, and against the face panels, providing cost-effective efficiency and, due to rapid heat-up, fuel saving energy conservation. Unobtrusive and pleasing to the eye, AEL Plan-Rads come complete with end cover plates, and attractive top outlet grilles. The standard finish for radiators up to 80 sections (2966mm) is a high grade epoxy powder coating, Satin white (RAL9010) Radiators over 80 sections in length are supplied in a Primer finish. Radiators can be be supplied in Syntha Pulvin colours if preferred. (Radiators up to 3000mm in length only). Please Note: (For fixing details refer to AEL Sectional Column Radiator Assembly & Fixing Information. Publication number RAFI 1015). AEL PlanRad

3 Models and Technical Data Two straight-run designs one single, and one double. Angled radiators can be custom-made to order. Rear, ribbed sections are made from 1.2mm mild steel. Standard finish RAL9010 satin white up to 80 sections. LST Model available. Face panels of all models are made from 1.5mm mild steel. Radiators over 80 sections supplied in primer. Model PS PDFR Rear Plan view of models without top grilles and frames Front Rear Front AEL PlanRad Radiator PS Straight single radiators. Single construction radiators with one flat front face and exposed rear ribs. 3 Models Depth Heights PS42 42mm 210mm 332mm 452mm 652mm 852mm PS62 62mm 210mm 332mm 452mm 652mm 852mm PS92 92mm 210mm 332mm 452mm 652mm 852mm Widths 37mm per section Available to order from 6 (228mm) minimum to 110 (4076mm) maximum ribbed sections. Working pressures PS42/PS62 6 Bar PS92 4 Bar Test pressures PS42/PS62 9 Bar PS92 6 Bar AEL PlanRad Radiator PDFR Straight double radiators. Pairs of single radiators fabricated one behind the other, presenting one flat, front face panel and exposed rear ribs. 3 Models Depth Heights PDFR95 (2 x PS42) 95mm 210mm 332mm 452mm 652mm 852mm PDFR130 (2 x PS62) 130mm 210mm 332mm 452mm 652mm 852mm PDFR194 (2 x PS92) 194mm 210mm 332mm 452mm 652mm 852mm Widths 37mm per section Available to order from 6 (228mm) minimum to 110 (4076mm) maximum ribbed sections. Working pressures PDFR95/PDFR130 6 Bar PDFR194 4 Bar Test pressures PDFR95/PDFR130 9 Bar PDFR194 6 Bar

4 AEL PlanRad Radiator Dimensions Height mm Tapping Centres mm Model PS Single Radiators 852 Single radiators with one flat front face and exposed rear ribs. PS 3 Depths Tappings at rear 42mm 62mm 92mm Model PDFR Double Radiators Pairs of single radiators fabricated one behind the other, presenting one flat, front face panel and exposed rear ribs. PDFR 3 Depths Tappings at rear 95mm 130mm 194mm 2 x PS42 2 x PS62 2 x PS Model PDFR Illustrated PSW1 Wall brackets (included in price) Fixing distance from wall to back of radiator: 18mm Fixing distance from wall to back of radiator: 38mm

5 AEL PlanRad Radiators Single Model PS Outputs stated are to 60 o C t. For correction factors see next page. Model No. PS42 Depth mm Height mm Sections and Weight kgs per section Overall Length Water Content ltrs per section sections Output Watts (228 mm) Btu/h sections Output Watts (302 mm) Btu/h sections Output Watts (376 mm) Btu/h sections Output Watts (450 mm) Btu/h sections Output Watts (524 mm) Btu/h sections Output Watts (598 mm) Btu/h sections Output Watts (672 mm) Btu/h sections Output Watts (746 mm) Btu/h sections Output Watts (820 mm) Btu/h sections Output Watts (894 mm) Btu/h sections Output Watts (968 mm) Btu/h sections Output Watts (1042 mm) Btu/h sections Output Watts (1116 mm) Btu/h sections Output Watts (1190 mm) Btu/h sections Output Watts (1264 mm) Btu/h sections Output Watts (1338 mm) Btu/h sections Output Watts (1412 mm) Btu/h

6 PS62 PS

7 Single Radiators Model PS Outputs stated are to 60 o C t. For correction factors see below. Model No. PS42 Depth mm Height mm Sections and Weight kgs per section Overall Length Water Content ltrs per section sections Output Watts (1486 mm) Btu/h sections Output Watts (1634 mm) Btu/h sections Output Watts (1782 mm) Btu/h sections Output Watts (1930 mm) Btu/h sections Output Watts (2078 mm) Btu/h sections Output Watts (2226 mm) Btu/h sections Output Watts (2596 mm) Btu/h sections Output Watts (2966 mm) Btu/h sections Output Watts (3336 mm) Btu/h sections Output Watts (3706 mm) Btu/h sections Output Watts (4076 mm) Btu/h AEL PlanRad Radiators Double, Angled, and Curved Models Outputs for double radiators To calculate the outputs of double radiators, determine the height and width of the required double radiator, then find the output of the equivalent single model in the tables and multiply the given output by the following factors: Height Factor 210mm multiply output for model PS x mm multiply output for model PS x mm multiply output for model PS x mm multiply output for model PS x mm multiply output for model PS x 1.75 Example Required double radiator is 210mm high x 20 sections wide. Model PS42 single radiator of this size delivers 422 Watts (1440 Btu/h). Therefore, 422 Watts x 1.85 = Watts (2664 Btu/h).

8 PS62 PS Correction factors The output tables shown are calculated at 60 C t. t = CF t = CF t = CF t = CF t = CF t = CF t = CF 30 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 1.95

9 Section 2 AEL LST-Rad Low Surface Temperature Radiator Designed to meet the requirements of NHS Estates publication Safe Hot Water and Surface Temperatures (ISBN ), AEL LST-Rad heat emitters are ideal for use in hospitals, nurseries, schools, homes for the elderly and mentally handicapped. Wall fixing LST-Rad. This design has grilles on the top only Made from high grade mild steel plate, they are finished as standard in a satin white (RAL 9010) coating, but can be supplied in Syntha Pulvin colours if preferred. Quality aluminium grilles are incorporated as standard, and intermediate linking sections can be provided to present the appearance of a continuous, radiator line. AEL LST-Rads are robust, unobtrusive, and can be relied upon to provide years of problem free service. Floor fixing LST-Rad. This unit has grilles at floor level and at the top. Please Note: (For fixing details refer to AEL Sectional Column Radiator Assembly & fixing Inforation. Publication number R.A 3/8/96). 50mm 50mm 50mm

10 AEL LST-Rad Low Surface Temperature Radiator Casing Important: Deduct 10% of radiator output when using LST enclosure For models of LST Castings see column 1 For Radiator lengths (number of sections) that casings will contain see column 2 Wall Mounting Version To select the correct Radiator and LST Casing, determine the output required and the space available (height and width). The space available will determine the size of the casing and by that token the size of radiator. Enclosure Radiator Minimum Valve Casing Casing Model Options Space Available Length Depth Number (Number of sections) (Using longest radiator) mm mm 1 2 PS-LST-W1 6/8/ PS-LST-W2 12/ PS-LST-W PS-LST-W4 18/20/ PS-LST-W5 24/26/ PS-LST-W6 30/32/ PS-LST-W7 36/38/ PS-LST-W8 44/ PS-LST-W9 52/ Single Double 42 PDFR = PDFR = PDFR = 250 Casing Casing Casing Casing Casing Height Height Height Height Height 310mm 430mm 550mm 750mm 950mm Radiator Radiator Radiator Radiator Radiator Height Height Height Height Height 210 mm 332 mm 452 mm 652 mm 852mm The enclosures are manufactured in 5 standard heights to suit the 5 heights of PlanRad in either the Wall Mounted version PS-LST-W or the Floor Mounted version PS-LST-F. Casings to suit Double Radiators, multiply the prices listed by a factor of 2. For LST Casing Height see row A For Radiator heights that the casings will contain see row B Floor Mounting Version There are 9 standard lengths, therefore each enclosure will fit a number of PlanRads (see column 2). For longer enclosures each enclosure may be joined to its neighbour by the use of open ended end panels. Enclosure Radiator Minimum Valve Casing Casing Model Options Space Available Length Depth Number (Number of sections) (Using longest radiator) mm mm A B 1 2 PS-LST-F1 6/8/ PS-LST-F2 12/ PS-LST-F PS-LST-F4 18/20/ PS-LST-F5 24/26/ PS-LST-F6 30/32/ PS-LST-F7 36/38/ PS-LST-F8 44/ Single PS-LST-F9 52/ Casing Casing Casing Casing Casing Height Height Height Height Number 510mm 630mm 750mm 950mm N/A Radiator Radiator Radiator Radiator Radiator Height Height Height Height Height 210 mm 332 mm 452 mm 652 mm 852mm Double 42 PDFR = PDFR = PDFR = 250 A B