Fitness Legacy Zone Rower

Transcription

1 Fitness Legacy Zone Rower PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT 1560x1325x915mm 14 to Adult <900mm Approx 144Kg Approx 195Kg SPECIFICATION Solid steel components to EN 10087:1998 Stainless steel components to EN : 2005 Steel plate to EN :2004 Steel CHS to EN :2004 Welding to EN ISO 14341:2011 HDPE to EN ISO 14632: 1998 Polyester powder paint to EN 13438:2005 Standard fixings to BS 3692:2001 and BS 4190:2001 Non-standard fixings are anti-vandal and corrosion resistant INSTALLATION INSTRUCTIONS 1 Read installation instructions thoroughly before commencing installation of unit. 2 Excavate two holes 600 x 600 x 600 deep - see page 2. 3 Position and assemble the below ground fixing with spragging irons (see page 2) centrally in the excavated holes so the eight bolts are pointing upwards ensuring that the top plate is flush with the finished surface level. 4 Check alignment of bolts, backfill the holes with concrete (0.41 cu Metres) (4 parts gravel, 2 parts sand & 1 part cement) ensuring that the below ground fixing is perpendicular to the finished surface level. 5 Allow the concrete to set for 48 hours. 6 Position the unit on the below ground fixing and fit using one M20 washer and two M20 nuts per bolt as shown on page 3. Ensure unit is perpendicular to the ground surface. 7 Ensure all moving parts move freely without obstruction. If all parts are functioning correctly cover the base of the unit with the two halves of the Base Castings and fasten with two M10 x 30 Pent button head screws. Note Use Installation Aid ( ) for Below Ground Fixing. Note Ensure all installation aids are removed before first use. Page 1 of 11

2 Below Ground Fixing Details (2 off) TYP 13 Foundation Detail (Care must be taken in abnormal conditions) Ctrs (90) FSL Concrete Spragging Irons FSL = Finished Surface Level Page 2 of 11

3 Rower to Below Ground Fixing Details Foundations omitted for clarity Page 3 of 11

4 Minimum and Training Spaces (970) Base Fixing Min Training Space R1500 Minimum Space R1000 Training Space (85) Page 4 of 11

5 Safety Surfacing Wetpour 3510 (970) Sq. Metres 40mm Wetpour 11.0 Linear Metres Wetpour Edging R1500 Rear Front (Foot End) 4500 Grass Mats (1500 x 1000mm) 1700 (970) off Total 2000 Front (Foot End) 4000 Rear Safety Tiles (1000 x 1000mm) 4000 (970) Sq. Metres 40mm Thickness 12.0 Linear Metres of Tile Edging 1500 Rear Front (Foot End) 3000 Page 5 of 11

6 Fixing Details for Maintenance Seat Frame Assembly * * mm Panel mm Panel 15mm Panel * Handle and Pivot Arm Assembly 12.5mm Panel * * * = For use with 12.5mm Standard Colour Panel (See Page 11) Page 6 of 11

7 Fixing Details for Maintenance Handle/Pivot Arm Assembly to Seat Frame Assembly Rear Arm Assembly Front Arm Assembly Page 7 of 11

8 Fixing Details for Maintenance Arm Assembly to Rower Frame and Seat Frame Assembly Note:- Plates to be on inside (4 Places) Page 8 of 11

9 Parts List ITEM QTY PART NUMBER DESCRIPTION Rower Frame W.A Seat Frame Assembly Seat Frame W.A Foot Cast Iron Side Panel - LH Side Panel - RH Front Panel Assembly M8 x 16 SKT HD CAP SCREW M8 x 16 Pent Button Head M8 x 20 LG PENT C'SK SCREW M8 NORD LOCK WASHER _Cup Black Poepplemann Cup _Cap Black Poepplemann Cap Side Panel - LH (12.5mm Panel) Side Panel - RH (12.5mm Panel) Front Panel Assembly (12.5mm Panel) Seat Panel M10 x 35 C'sunk Skt Screw c/w Pin _Cup Green Poeppelmann Cup _Cap Green Poepplemann Cap Handle Assembly Handle W.A Handle BALL BEARING Ø52 x Ø25 x Spiral Ring - Internal 52 Dia Small Buffer (Top) Small Buffer (Bottom) M8 x 50 SKT CAP HD SCREW M8 x 35 Hex Head Bolt M8 NORD LOCK WASHER M8 Washer M8 Binx Nut _Cap Black Poepplemann Cap _Cap Green Poepplemann Cap Parts List Continued on Page 10 Page 9 of 11

10 Parts List ITEM QTY PART NUMBER DESCRIPTION Pivot Arm Assembly Pivot Arm W.A BALL BEARING Ø52 x Ø25 x Spiral Ring - Internal 52 Dia Rear Arm Assembly Rear Arm W.A BALL BEARING Ø52 x Ø25 x Spiral Ring - Internal 52 Dia Front Arm Assembly Front Arm W.A BALL BEARING Ø52 x Ø25 x Spiral Ring - Internal 52 Dia Spindle Spindle Bearing Cover -Skier Bearing Cover Bearing Cover Spiral Ring - External 25 Dia BELOW GROUND FIXING mm Spragging Iron O-009 BASE CASTING M10 x 30 Pent Button Head M20 x 100 HT HEX HD BOLT M20 WASHER 2mm THK M20 Nut M8 x 25 Pent Button Head External Circlip Ø25mm Parts List Continued on Page 11 Page 10 of 11

11 Front Panel HDPE Colour Options Orange/Black/Orange - 15mm Thick Yellow/Black/Yellow - 15mm Thick Green/Black/Green - 15mm Thick Beige/Green/Beige mm Thick Note:- all panels require inserts. LH Side Panels HDPE Colour Options Orange/Black/Orange - 15mm Thick Yellow/Black/Yellow - 15mm Thick Green/Black/Green - 15mm Thick Beige/Green/Beige mm Thick RH Side Panels HDPE Colour Options Orange/Black/Orange - 15mm Thick Yellow/Black/Yellow - 15mm Thick Green/Black/Green - 15mm Thick Beige/Green/Beige mm Thick COMPILED MC DATE: 05/11/13 REV ECN SIG. DATE: Minor MC MC 07/05/14 23/06/14 2 Minor MC 18/08/14 3 Minor MC 15/10/14 4 Minor MC 03/12/14 5 Minor MC 25/08/15 6 Minor MC 16/09/ Minor Minor MC 13/10/15 MC 01/02/17 Page 11 of 11

12 DESPATCH LIST Sheet 1 of 2 Product: Rower - Fitness Legacy Zone Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch BGF upright Rower frame welded assy * Seat Frame Welded Assembly * Handle Welded Assembly * Front Arm Welded Assembly * Rear Arm Welded Assembly * Pivot Arm Welded Assembly * Side Panel - LH (Orange/Black/Orange - 15mm)* Side Panel - RH (Orange/Black/Orange - 15mm)* Seat Panel (Grey Smooth - Polydek - 15mm)* Front Panel (Orange/Black/Orange - 15mm)* Base casting 2001O Foot Cast Iron * Fitness Instruction Label (Rower) * Fixing pack Alternative Side Panel - LH Colour Options 9A 1 Side Panel - LH (Yellow/Black/Yellow - 15mm)* B 1 Side Panel - LH (Green/Black/Green - 15mm)* C 1 Side Panel - LH (Beige/Green/Beige mm)* Total No. of Items Picked By: Checked By: COMPILED REV BY: MC ECN No Minor Minor Minor DATE 28/02/ /05/ /09/ /12/2014 DATE: 28/02/14 SIGN MC MC MC MC

13 DESPATCH LIST Sheet 2 of 2 Product: Rower - Fitness Legacy Zone Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked Items marked * to be fitted before despatch Alternative Side Panel - RH Colour Options 10A 1 Side Panel - RH (Yellow/Black/Yellow - 15mm)* B 1 Side Panel - RH (Green/Black/Green - 15mm)* C 1 Side Panel - RH (Beige/Green/Beige mm)* Alternative Front Panel Colour Options 12A 1 Front Panel (Yellow/Black/Yellow - 15mm)* B 1 Front Panel (Green/Black/Green - 15mm)* C 1 Front Panel (Beige/Green/Beige mm)* Total No. of Items Picked By: Checked By: COMPILED REV BY: MC ECN No Minor Minor Minor DATE 28/02/ /05/ /09/ /12/2014 DATE: 28/02/14 SIGN MC MC MC MC

14 FIXINGS LIST Sheet 1 of 2 Product: Rower - Fitness Legacy Zone (For 15mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 1 22 Ball bearing dia 52 x dia 25 x 15 * Spiral ring - internal 52 dia * Spiral ring - external 25 dia * Spindle * Spindle * Bearing Cover * Bearing Cover * Bearing Cover * Small Buffer (Top) * Small Buffer (Bottom) * Handle * M8 x 16 LG SOCKET HEAD CAP SCREW * Black Poeppelmann cap * Black Poeppelmann cup * Spragging iron 460mm lg M8 x 16 Pent Button Head * M8 x 20 LG PENT C'SK SCREW * M8 x 35 Hex Head Bolt * M8 x 50 SKT CAP HD SCREW * M8 washer * M8 NORD LOCK WASHER * M8 Binx Nut * Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/ /02/2017 DATE: 28/02/14 SIGN MC MC

15 FIXINGS LIST Sheet 2 of 2 Product: Rower - Fitness Legacy Zone (For 15mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 25 2 M8 Tee Nut insert * M10 x 35 C'sunk Hex Skt Screw c/w pin * M10 x 30 pent button head screw (8 off *) M20 x 100 HT hex head bolt M20 washer M20 nut M10 pent key Dia 1/8" x 5/8" Lg Sellok Pin * M8 x 25 Pent Button Head * External Circlip Ø25mm * Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/ /02/2017 DATE: 28/02/14 SIGN MC MC

16 FIXINGS LIST Sheet 1 of 2 Product: Rower - Fitness Legacy Zone (For 12.5mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 1 22 Ball bearing dia 52 x dia 25 x 15 * Spiral ring - internal 52 dia * Spiral ring - external 25 dia * Spindle * Spindle * Bearing Cover * Bearing Cover * Bearing Cover * Small Buffer (Top) * Small Buffer (Bottom) * Handle * Green Poeppelmann cap * Green Poeppelmann cup * Spragging iron 460mm lg M8 x 16 Pent Button Head * M8 x 20 LG PENT C'SK SCREW * M8 x 35 Hex Head Bolt * M8 x 50 SKT CAP HD SCREW * M8 washer * M8 NORD LOCK WASHER * M8 Binx Nut * Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/ /02/2017 DATE: 28/02/14 SIGN MC MC

17 FIXINGS LIST Sheet 2 of 2 Product: Rower - Fitness Legacy Zone (For 12.5mm Thick Panels) Date of Issue: 28/02/14 Order No: Issue: A Item Unit Qty Description Part No. Checked 25 2 M8 Tee Nut insert * M10 x 35 C'sunk Hex Skt Screw c/w pin * M8 x 16 LG SOCKET HEAD CAP SCREW * M10 x 30 pent button head screw (8 off *) M20 x 100 HT hex head bolt M20 washer M20 nut M10 pent key Dia 1/8" x 5/8" Lg Sellok Pin * M8 x 25 Pent Button Head * External Circlip Ø25mm * Items marked * to be fitted before despatch Total No. of Items Picked By: Checked By: COMPILED REV 6 7 BY: MC ECN No. Minor Minor DATE 28/09/ /02/2017 DATE: 28/02/14 SIGN MC MC