NORMAFIX Retaining Products
|
|
|
- Lewis Gibbs
- 6 years ago
- Views:
Transcription
1 RS/RSGU/RLGU Pipe retaining clips to DIN 3016 RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications. Short description of technical features Type Form fitting and adjustable band = ease of assembly = safe attachment Reinforced band ends = prevent the clip from tearing or loosening in cases where there is a high mechanical load 3 Optionally supplied with EPDM profile = vibration damping & protection against seepage water = sound insulation = clip fits tight on object Materials W1 W W3 W4 W5 x x* x* x * on request 88
![EPDM profile Material properties of EPDM profile Material properties Clip types EPDM profile Tensile strength [N/mm ] min.](/docs-images/72/66696764/images/2-0.jpg "8 Elongation at break [%] 350 Shore hardness A 70 ± 5 Temperature [ C] 40 up to +10 Resistance against: Weather/ozone Very good Ageing and light Very good Petrol Unstable Oil and grease Unstable")
2 EPDM profile Material properties of EPDM profile Material properties Clip types EPDM profile Tensile strength [N/mm ] min. 8 Elongation at break [%] 350 Shore hardness A 70 ± 5 Temperature [ C] 40 up to +10 Resistance against: Weather/ozone Very good Ageing and light Very good Petrol Unstable Oil and grease Unstable Alcohols Good Acids Good Alkalis Good Silicone profile on demand. B = Band width of clamp b 1 = Width in mm s = Material thickness in mm The standard version RS/RSGU clips (Type 1) are also available in a round shape ( RS/RSGU Type 0) or open shaped ( RS/RSGU Type ). Type 0 Type In addition to the designs already mentioned we offer the RC clip. This special design, a variation of the standard RS/RSGU Type 1, is provided with an integrated mounting fastener. When the clip ends are compressed the fastener locks into place and locks the clip. Thus the RC can be easily preassembled on the pipe. Diameters and band widths will be furnished on request. Recently a new type, the RLGU, was added to our range. It is also a variation of the standard Type 1, but without reinforced band ends and therefore suitable for use in applications submitted to only slight mechanical loads as, for example, the fastening of cables. RLGU are only available in band width 1 mm. For the complete programme please refer to the table of sizes. All pipe retaining clips are available with a special sound damping rubber profile as optional equipment. 89
3 Screw The clips are furnished without screws and nuts. We recommend: For RSGU band width 1 mm Screw M 5 For RSGU band width 15 mm Screw M 6 For RSGU band width 0 mm Screw M 8 For RLGU band width 1 mm Screw M 6 Applications Any kind of fixing and retaining 90
4 Survey of sizes, band widths & materials RSGU/RS Band width Clamping Range Packaging (mm) Description in mm in Inches PU W1 W5 1 RSGU 1.6/1 6 1/4 100 X X 1 RSGU 1.8/1 8 5/ X X 1 RSGU 1.10/1 10 3/8 100 X X 1 RSGU 1.1/1 1 1/ 100 X X 1 RSGU 1.13/1 13 1/ 100 X X 1 RSGU 1.14/1 14 9/ X X 1 RSGU 1.15/1 15 5/8 100 X X 1 RSGU 1.16/1 16 5/8 100 X X 1 RSGU 1.18/1 18 3/4 100 X X 1 RSGU 1.19/1 19 3/4 100 X X 1 RSGU 1.0/1 0 13/ X X 1 RSGU 1.1/1 1 13/ X X 1 RSGU 1./1 7/8 100 X X 15 RSGU 1.6/15 6 1/4 100 X X 15 RSGU 1.8/15 8 5/ X X 15 RSGU 1.10/ /8 100 X X 15 RSGU 1.1/15 1 1/ 100 X X 15 RSGU 1.13/ / 100 X X 15 RSGU 1.14/ / X X 15 RSGU 1.15/ /8 100 X X 15 RSGU 1.16/ /8 100 X X 15 RSGU 1.18/ /4 100 X X 15 RSGU 1.19/ /4 100 X X 15 RSGU 1.0/ / X X 15 RSGU 1.1/ / X X 15 RSGU 1./15 7/8 100 X X 15 RSGU 1.3/15 3 7/8 100 X X 15 RSGU 1.5/ X X 15 RSGU 1.6/ / X X 15 RSGU 1.8/ /8 100 X X 15 RSGU 1.30/ / X X 15 RSGU 1.3/ /4 100 X X 15 RSGU 1.34/ / X X 15 RSGU 1.35/ /8 100 X X PU = packaging unit 91
5 Survey of sizes, band widths & materials RSGU Band width Clamping Range Packaging (mm) Description in mm in Inches PU W1 W5 0 RSGU 1.10/0 10 3/8 100 X X 0 RSGU 1.1/0 1 1/ 100 X X 0 RSGU 1.13/0 13 1/ 100 X X 0 RSGU 1.14/0 14 9/ X X 0 RSGU 1.15/0 15 5/8 100 X X 0 RSGU 1.16/0 16 5/8 100 X X 0 RSGU 1.18/0 18 3/4 100 X X 0 RSGU 1.19/0 19 3/4 100 X X 0 RSGU 1.0/0 0 13/ X X 0 RSGU 1./0 7/8 100 X X 0 RSGU 1.3/0 3 7/8 100 X X 0 RSGU 1.4/0 4 15/ X X 0 RSGU 1.5/ X X 0 RSGU 1.8/0 8 11/8 100 X X 0 RSGU 1.30/ / X X 0 RSGU 1.3/0 3 11/4 100 X X 0 RSGU 1.34/ / X X 0 RSGU 1.35/ /8 100 X X 0 RSGU 1.36/ / X X 0 RSGU 1.38/ / 100 X X 0 RSGU 1.40/ / X X PU = packaging unit Enquiries/ordering: When making enquiries or placing orders please state as follows: 1. Type. Clamping Range 3. Band width 4. Material (pipe outside diameter) Example RSGU 1. 6/ 1 W1 9
6 Survey of sizes, band widths & materials RLGU Band width Clamping Range Packaging (mm) Description in mm in Inches PU W1 1 RLGU 1.5/1 5 3/ X 1 RLGU 1.6/1 6 1/4 100 X 1 RLGU 1.7/1 7 5/ X 1 RLGU 1.8/1 8 5/ X 1 RLGU 1.9/1 9 3/8 100 X 1 RLGU 1.10/1 10 3/8 100 X 1 RLGU 1.11/1 11 7/ X 1 RLGU 1.1/1 1 1/ 100 X 1 RLGU 1.13/1 13 1/ 100 X 1 RLGU 1.14/1 14 9/ X 1 RLGU 1.15/1 15 5/8 100 X 1 RLGU 1.16/1 16 5/8 100 X 1 RLGU 1.17/ / X 1 RLGU 1.18/1 18 3/4 100 X 1 RLGU 1.19/1 19 3/4 100 X 1 RLGU 1.0/1 0 13/ X 1 RLGU 1.1/1 1 13/ X 1 RLGU 1./1 7/8 100 X 1 RLGU 1.3/1 3 7/8 100 X 1 RLGU 1.4/1 4 15/ X 1 RLGU 1.5/ X 1 RLGU 1.6/1 6 11/ X 1 RLGU 1.7/1 7 11/ X 1 RLGU 1.8/1 8 11/8 100 X 1 RLGU 1.9/1 9 11/8 100 X 1 RLGU 1.30/ / X 1 RLGU 1.31/ /4 100 X 1 RLGU 1.3/1 3 11/4 100 X 1 RLGU 1.33/ / X 1 RLGU 1.34/ / X 1 RLGU 1.35/ /8 100 X 1 RLGU 1.36/ / X 1 RLGU 1.37/ / X 1 RLGU 1.38/ / 100 X 1 RLGU 1.39/ / X 1 RLGU 1.40/ / X 1 RLGU 1.41/ /8 100 X 1 RLGU 1.4/1 4 15/8 100 X 1 RLGU 1.43/ / X 1 RLGU 1.44/ /4 100 X 1 RLGU 1.45/ /4 100 X PU = packaging unit 93
7 RS 0. Pipe retaining clip type 0, without rubber sleeve Band width Min. d h1 ) (mm) l s (mm) 1) W1 W3 W (M4) (M5) (M6) from 15 = (M8) = 0.8 from 6 = (M10) = = 0.6 from 50 = 1.5 RSGU 0. Pipe retaining clip type 0, with rubber sleeve Band width Min. Rubber Sleeve h1 ) (mm) (mm) 1) b1 s EPDM Silicone RS 1. Pipe retaining clip type 1, without rubber sleeve Band width Min. d h1 ) (mm) l s (mm) 1) W1 W3 W (M4) (M5) = (M6) from 15 = = (M8) from 6 = (M10) = from 50 = 1.5 RSGU 1. Pipe retaining clip type 1, with rubber sleeve Band width Min. Rubber Sleeve h1 ) (mm) (mm) 1) b1 s EPDM Silicone * * * * Standard range 94
8 RS. Pipe retaining clips type, without rubber sleeve Band width Min. d h1 ) (mm) l s (mm) 1) W1 W3 W (M4) (M5) = (M6) from 15 = = (M8) from 6 = = (M10) from 50 = 1.5 RSGU. Pipe retaining clip type, with rubber sleeve Band width Min. Rubber Sleeve h1 ) (mm) (mm) 1) b1 s EPDM Silicone RLGU Pipe retaining clip type 1, with rubber sleeve Band width Min. d h1 ) (mm) l Rubber Sleeve s (mm) 1) b1 s EPDM W (M6) = 0.6 from 1 = 0.8 1) The increments are in steps of 1 mm. ) Tool b1 = Width in mm s = Material thickness in mm (see page 89) Bolts and nuts are not included in the delivery. Abbreviations used in the table entries 95
NORMAFIX Retaining Products
HMK Retaining clamps with brackets HMK retaining clamps with brackets are used to attach containers or pipes to ceilings and walls. They are also used in mechanical engineering and plant construction.
PSI CASING END SEALS FOR CASING PIPE CLOSURE FOR PROTECTION AGAINST MOISTURE AND DIRT ALSO FOR RETROFITTING INDIVIDUAL CUSTOMIZED SOLUTIONS
PSI CASING END SEALS FOR CASING PIPE CLOSURE FOR PROTECTION AGAINST MOISTURE AND DIRT ALSO FOR RETROFITTING INDIVIDUAL CUSTOMIZED SOLUTIONS WWW.PSI-PRODUCTS.COM 111 PSI Casing End Seals Pipes carrying
ARMA BAĞLANTI SİSTEMLERİ A.Ş.
ARMA BAĞLANTI SİSTEMLERİ A.Ş. ARMA FIXING SYSTEMS, initially established as a molding workshop in 1980, is an innovative and dynamic company serving its customers in various sectors primarily automotive,
ÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
Air Intake & Induction
Customer Value through Innovation Air Intake & Induction Leak-free solutions for higher efficiency www.normagroup.com Our mission is to downsize. When it comes to designing an engine, we are constantly
PIPING SOLUTIONS Sewage HT (PP) PIPES
PIPING SOLUTIONS Sewage HT (PP) PIPES 74 HT (PP) PIPES & fittings for domestic & street sewage systems The pipes for domestic sewerage systems together with the appropriate coupling sleeves are intended
PSI SEALING PLUGS PRESSURE TIGHT UP TO 3 BAR HORIZONTAL AND VERTICAL MOUNTING POSITION FIVE RUBBER QUALITIES FOR DIFFERENT APPLICATIONS
PSI SEALING PLUGS PRESSURE TIGHT UP TO 3 BAR HORIZONTAL AND VERTICAL MOUNTING POSITION FIVE RUBBER QUALITIES FOR DIFFERENT APPLICATIONS WWW.PSI-PRODUCTS.COM 65 PRODUCT DESCRIPTION The PSI sealing plug
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
Safety Contact Strips. Safety Contact Strips
Contact Strips, Bumpers, Mounting and Controllers Profile materials EPDM or NBR rubber Provides housing for safety contact Available in sizes to fit many applications Safety Bumpers Foam rubber covered
Machine shut-off nozzle for Elastomer; Type-E Integrated actuator and tempering system
Machine shut-off nozzle for Elastomer; Type-E Integrated actuator and tempering system Application: Elastomeric plastics Shut-off technique: Integrated two way pneumatic actuator Characteristics: Integrated
Cat. No. for TNSC Configuration
2 www.controlwell.com TT TY TV TNS SNP ON ONDUIT OUPLERS Distributors made of Polyamide can be used instead of a distribution box. These special connectors are used to clamp standard corrugated conduits.
material handling optibelt rr / rr Plus / hrr
material handling optibelt rr / rr Plus / hrr Page 2 optibelt rr / rr Plus round belts 82 yellow For use with small idler pulleys; fl exible at low temperatures; very elastic; low power transmission capacity
Components: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
Tubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
MILD STEEL MARINE MINING AUTOMOTIVE AGRICULTURE STAINLESS STEEL
MILD STEEL MARINE MINING AUTOMOTIVE AGRICULTURE STAINLESS STEEL 16 HOSE CLAMPS 18... NORMACLAMP TORRO WORM DRIVE 19... BREEZE POWERSEAL SLOTTED CLAMP 19... BREEZE MERCHANDISING KITS 20... NORMA MERCHANDISING
SUBJECT: EB e-stroke Disc Actuator & Harness Installation Guide
Actuator Mounting Instructions: 1. Remove Shipping Dust Cover from Actuator. 2. Reference Page 2: Ensure Mounting and Sealing Surfaces are Clean. 3. Reference Page 3: Lubricate Lever Arm Socket per Caliper
Physical Properties. Temperature Limits. Durometer 60 +/-5. Average Elongation 350% Specific Gravity 1.50 Polymer Content 20% -20 o F to +212 o F
The Advance Standard Model AW Wraparound casing end seal is manufactured of 1/8 thick neoprene rubber, assuring excellent chemical resistance and resiliency. Also included are ½ wide T304 stainless steel
3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE. L 303 e.1
3 CONNECTING PIECES NORMAG - LABORATORY GLASSWARE L 303 e.1 CONICAL GROUND JOINTS Besides a numerous of other types of connectors, conical ground joints are mostly used for laboratory glassware. They are
Tubing. Direct from the manufacturer
Tubing Direct from the manufacturer 1 Diversity is our strength Spetec tubing is offered in a number of different materials: PVC (standard and solvent-resistant), Polyurethane, Fluoro rubber comparable
Components: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
PSI Link-Seal Modular Seals
01 General Information Technical Data Selection Guide Order Submittal Sheet Installation Instruction PSI Link-Seal Modular Seals Pipeline Accessories 5 Link-Seal Modular Seals General Information Application
Components: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
SEALING PLUGS
SEALING PLUGS 1.7.5.1 General information Product description The PSI plug is a sealing device consisting of two half shells. It is especially designed to seal cables and pipes passing through walls and
Ball screw drives KGT General technical data
KGT General technical data Manufacturing process The thread profile is produced by cold rolling in the thread rolling method. Both screw and nut have a gothic thread profile. The load angle is 45. Linear
ROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
Polymer Electric. Product information. DIY Sensor Profiles
Polymer Electric Product information DIY Sensor Profiles GmbH & Co. KG Polymer Electric Örlinger Straße 1 3 89073 Ulm GERMANY Tel.: 49 731 20610 Fax: 49 731 2061222 email: info.ulm@mayser.com Internet:
Pneumatic Seals 1/2 Pneumatic Seals 2/2. Pneumatic Seals
Seals Seals * 1 Mpa = 10 Bar 1 Bar = 14.5 psi 1 Mpa = 145 psi Combination Wiper/Rod Seal This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type
Buffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
For advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
Datasheets - General Purpose Elastomers
Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical
3 TM Cold Applied Barrier Boot System
M Technical Information : Barrier Boot TM Cold Applied Barrier Boot System For rated voltages 6.5/11(12) kv and 8.7/15(17.5) kv 92-EE 717-1 Product Description The Cold Applied Barrier Boot System consist
Grommet TET. Cable glands. Basic Data. Application. Press the grommet into the hole.
Basic Data Description s available in two different materials, EPDM and CR. Suitable for Untapped holes of material from 0.5 to 4 thickness. For completely dust and watertight cable and pipe inlets. Advantages
Cable ties. Features Easy to install and remove. Provides protection to the wire bundle. Available in white and black
Features Easy to install and remove. Provides protection to the wire bundle. Available in white and black Applications Fast and economical grouping of wire bundles. Joining groups of wires and/or tubing.
Nissan R35 GTR Intercooler Pipe Kit w/ Cold Air Intake Installation Instructions
Nissan R35 GTR Intercooler Pipe Kit w/ Cold Air Intake Installation Instructions 1. Disconnect the negative terminal on the battery that is located at the passenger firewall side. 2. Remove both front
Coolant Pump, Remove and Install (Z 22 SE)
Page 1 of 10 Coolant Pump, Remove and Install (Z 22 SE) Remove 1. Open the bonnet. 2. Disconnect the battery. 3. Open the rear engine cover (1). 4. Detach the rear engine cover. 6 bolts (2) and (3) 5.
PIPE FASTENING BANDS AND COLLARS CATALOGUE 2016 edition
PIPE FASTENING BANDS AND COLLARS CATALOGUE 2016 edition tel: +39.011.822.69.16 - fax: +39.011.898.58.44 Our Company E stablished in 1984 as manufacturing plant for technical articles in rubber and rubber
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI
O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI O -Rings PRODUCTS OF INTEGRITY...FROM PEOPLE OF INTEGRITY How to size your O -Rings Newman Elastomer Characteristics If you don t know the
Energy Supply Systems
Energy Supply Systems MULTIPOLE CONDUCTOR RAIL 831 10-125 amps KAT0831-0001b-E 13 pole multipole conductor rail in 33 package distribution centres of the postal service (Post AG) 9 pole multipole conductor
SKiM 63/93 IGBT Modules. Content. Mounting Instruction
Mounting Instruction SKiM 63/93 IGBT Modules Revision: 1.7 Issue date: 2016-02-26 Prepared by: Anastasia Schiller Approved by: Peter Beckedahl Keyword: SKiM63/93, Mounting Instruction Content 1. Preparation,
Smittybilt Gen2 XRC 9,500,lb. Winch Manufacturer Part Number Model Number J106786
Smittybilt Gen2 XRC 9,500,lb. Winch Manufacturer Part Number 97495 Model Number J106786 Installation Time: 1 hour Tools Required: Work Light Box Cutter 10mm Open End Wrench 13mm Open End Wrench 14mm Open
Tooling List 10mmSocket 12mm Socket 3/8 Drive Ratchet
Thank you for purchasing the CorkSport Mazdaspeed 3 Short Ram Intake. One of the easiest and most beneficial performance enhancements you can do for your vehicle, the CorkSport Power Series Short Ram Intake
CONVEYOR BELTS REACH ROHS. Process and conveyor belts are composite products made of high-quality fabrics and various coating materials.
CONVEYOR BELTS CONVEYOR BELTS Process and conveyor belts are composite products made of high-quality fabrics and various coating materials. The combination of these materials results in a variety of belts
Spare Tire Access Guide (2) Plastic Plugs for License Plate on Trailer Plug Bracket Trailer Plug Bracket
LDB-CSIL55-RB PARTS LIST: 1 LD1 Bumper Assembly 12 14mm x 28mm OD x 2.5mm Flat Washers 1 Driver/left Frame Bracket 6 14mm Nylon Lock Nuts 1 Passenger/right Frame Bracket 4 12-1.75mm x 35mm Hex Bolts 1
RUBBER BELLOWS TYPE 1A & 1S SERIES
RUBBER BELLOWS TYPE 1A & 1S SERIES Description: Vibracoustics Ltd Reiflexa Bellows are made from various elastomers reinforced with high tensile textile or steel cords to provide the flexible elements
Direct drive electronic position indicators
Direct drive electronic position indicators DD51-E ELESA original design Direct drive electronic position indicators with battery power supply Base and case High-resistance polyamide based (PA) technopolymer.
Steering Cylinders. Remove Steering Cylinders. Disassembly and Assembly 920 & 930 WHEEL LOADER VEHICLE SYSTEMS
Disassembly and Assembly 920 & 930 WHEEL LOADER VEHICLE SYSTEMS Steering Cylinders Remove Steering Cylinders 1. Turn the machine all of the way to the left to remove the right steering cylinder. Turn the
Reliable Protection. Simplified Wiring. CI-K enclosure system
CI-K small enclosures www.eaton.eu/ci-k Reliable Protection. Simplified Wiring. CI-K enclosure system The CI-K Enclosure System Reliable Protection. Simplified Wiring. The main job of an enclosure is to
Includes: 1. J-hook Block Off / Coolant Reroute 1. Coolant Hose 1. Turbocharger Up Pipe Block Off Disc 2. Hose clamps
Includes: 1. J-hook Block Off / Coolant Reroute 1. Coolant Hose 1. Turbocharger Up Pipe Block Off Disc 2. Hose clamps WARNING: This product is not legal for sale or use on pollution controlled vehicles
UNIDIRECTIONAL Round Guillotine Damper
28/02/2012 UNIDIRECTIONAL Round Guillotine Damper Gas valve, with round damper design. Unidirectional guillotine damper. Various seat and packing materials available. Face to face distance in accordance
2015 Ford F150 Rear Bumper w/ LED
2015 Ford F150 Bumper w/ LED T527990 T527991 PARTS LIST: 1 Bumper Assembly 4 12mm Lock Washers 2 Mounting Brackets 6 12 mm Nylon Lock Nuts 4 Sensor Hole Plugs 8 4mm x 10mm Button Head Bolts 2 Plastic Plugs
THOMAFLUID - Handbook IV
Reichelt Chemietechnik GmbH + Co. - Handbook IV lndustrial Connectors of Metal Tubing Squeeze Connections of Metal for Pneumatics Quick-Disconnect Couplings of Plastics and Metal Cocks and Valves of Plastics
Includes: 1. High Flow Turbo Up-Pipe 1. J-Hook Block Off / Coolant Reroute 1. Coolant Hose 1. EGR Valve Block Off Plate 2. Hose Clamps 4.
Includes: 1. High Flow Turbo Up-Pipe 1. J-Hook Block Off / Coolant Reroute 1. Coolant Hose 1. EGR Valve Block Off Plate 2. Hose Clamps 4. Bolts & Nuts WARNING: This product is not legal for sale or use
Delivery program Ohrdrufer SchlauchWeberei Eschbach GmbH
Delivery program Ohrdrufer SchlauchWeberei Eschbach GmbH FIRE FIGHTING Syntex 500... The fire fighting hose to DIN 14811 : 2008 class 1/class 2... 4 Syntex 500-Extra... The heavy duty fire fighting hose
AEV30243AJ Last Updated: 11/14/17. 3 Dualsport front suspension ram truck 2500/3500 INSTALLATION GUIDE
AEV30243AJ Last Updated: 11/14/17 3 Dualsport front suspension ram truck 2500/3500 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
RUBBER BELLOWS general
RUBBER BELLOWS general Our rubber compensators are made from various elastomers and provide the flexible element in pipework that is indispensable in todays technically advanced plant and machinery installations.
Invert Extend N Go SF-BH6719 USER MANUAL
Invert Extend N Go SF-BH6719 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
Components: Dimensions / Order Codes
Components: Dimensions / Clamp Body ingle Design L B L L Clamp Body tandard Materials Thermoplastic Elastomer (87 hore-a) Colour: Black Material code: A ee page A90 for material properties and technical
P.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
HOSE & CLAMPS HOSE & CLAMPS
15 HOSE & CLAMPS Hose & Clamps 141 Oil and Petroleum Hose :: 15.1 Petrol & Oil Suction Hose TUBE: black, static conducting, nitrile rubber. REINFORCEMENT: high tensile textile cords and multiple helix
Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48
Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents
TABLE OF CONTENTS. Remember ROGERS for Rubber & Plastic page 2
TABLE OF CONTENTS BUTYL RUBBER... 4 BUTYL RUBBER SHEETS 60 SDH... 4 BUTYL RUBBER ROLLS 60 SDH... 4 EPDM RUBBER... 5 EPDM RUBBER SHEETS 60 SDH... 5 EPDM RUBBER ROLLS... 5 HYGIENIC WHITE RUBBER... 6 HYGIENIC
MÜPRO. One-piece pipe clamps. Sprinkler pipe clamps. Refrigerant pipe clamps. Two-piece pipe clamps. Heavy-duty pipe support/din pipe clamps
0. MÜPRO 1. Vibration control 2. Fire protection 3. Pipe clamps 4. Support channels 5. Accessories 6. Anchor points/expansion points 7. Heavy-duty pipe support 8. MPT-Support system 9. Ventilation 10.
ECCENTRIC PLUG VALVES
Serving the Water & Waste Water Industry Since 1878 ECCENTRIC PLUG VALVES C517 3 24 sizes available Multiple end connections available M&H Valve is a division of McWane, Inc. www.mh-valve.com AVAILABLE
* PLEASE READ INSTRUCTIONS PRIOR TO INSTALLATION
XDP 6.0L Complete EGR Delete Kit w/up-pipe Item Number: XD169 PACKING LIST: 2 - Lined 3/4" Hose Clamps, 1-180 Coolant Tube, 1-3/4 Silicone Hose, 1 - Stainless Steel Up-pipe 1 - EGR Valve Block-Off Plate,
Includes: 1. Upgraded Tube Type EGR Cooler 2. Silicone Hoses
Includes: 1. Upgraded Tube Type EGR Cooler 2. Silicone Hoses CAUTION: Never work on a hot vehicle. The hot exhaust system or hot engine can cause serious injury in the form of burns. If the vehicle has
Read and understand all instructions and warnings prior to installation of system and operation of vehicle.
491 W. Garfield Ave., Coldwater, MI 49036 Phone: 517-279-2135 Web/live chat: www.bds-suspension.com E-mail: tech@bds-suspension.com Part#: 121619 Product: Rear Traction Bar System Read and understand all
Torque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General... 3 2. General screw torque for metric screws... 4 3. Mounting torque series 10 plug locking sleeve... 5 3.1. Mounting torque series 10 fastening / jam nut... 5 3.2. Mounting torques
YOUR NATIONAL PARTNER WITH THE COMPLETE PRODUCT PROGRAM FOR EVERY COMPANY
MKD BELTING MKD MKD BELTING BELTING Industriezone D Helst 15 9280 Lebbeke Tel. +32(0) 52 41 17 02 Fax. +32(0) 52 41 34 20 BTW 0450.873.519. YOUR NATIONAL PARTNER WITH THE COMPLETE PRODUCT PROGRAM FOR EVERY
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX
technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0
MATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
Torque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General 3 2. General screw torque for metric screws 4 3. series 10 plug locking sleeve 5 3.1 series 10 fastening / jam nut 5 3.2 s series 10 locking sleeve for GISMA endbells 6 3.3 s series
DATA SHEET OF COMPASHIELD EE GASKET
DATA SHEET OF COMPASHIELD EE GASKET Introduction Compashield EE gaskets developed by Nolato is extruded in parallel with dual conductive/non-conductive gaskets, provide both optimum EMI and environmental
4 pole insulated conductor rails ULA 35A, 50A, 80A, 100A
Table of contents General information... 3 Elements of the conductor rail supply line... 3 Innovative connection method... 3 Technical properties... Construction of the line section... Line section...
Installation Instructions BR20 Rear Bumper Replacement Part # 28178T Toyo ta Tundra 2/4WD
Installation Instructions BR20 Rear Bumper Replacement Part # 28178T 2014-2016 Toyo ta Tundra 2/4WD Excludes Models with B lind Spot Monitoring & Cross Traffic Alert Parts List Item Qty. Part # Description
Flexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
V-Rings around the clock... around the clock...
Description V-rings are rotary seals that can perform numerous jobs in their function of sealing rotating shafts: sealing against the penetration of dirt, dust, water or watery pollutants, combination
Matrix IC3. model no.: IC-MXIC3B-01 ENG ESP
Matrix IC3 model no.: IC-MXIC3B-01 Manufactured by: Indoorcycling Group GmbH Happurger Str. 86 90482 Nuremberg Germany www.indoorcycling.com info@indoorcycling.com MATRIX Fitness Systems Corp. 1610 Landmark
250300APR DC coated and 316 stainless steel
250/300mm APR Self Priming (dc) Series Pump Heavy Duty Applications Specialised Design Features Suction flange - heavy duty 300 mm or 250 mm hole patterns to AS2129 E Discharge flange - heavy duty 250
OWNER S MANUAL LIFETIME WARRANTY. Truxedo TonneauTraX
OWNER S MANUAL Truxedo TonneauTraX Premium Soft Roll-Up cargo rail Tonneau Cover combination LIFETIME WARRANTY TruXedo warrants that all new, unused products are free from defects in material and workmanship.
Electric Hoist. LE 250 (kg) D 230 V 60 m. 6 m. 60 m. 6 m
Electric Hoist LE 250 (kg) D 230 V 60 m 6 m 6 m 60 m 1 TECHNICAL DATA Model 2 LE 250 D 230 V 60 mtr Voltage 230V, 50Hz Current (A) 5.7 Input power (W) 1300 Rated load (kg) 250 Lifting height (m) 60 *Rated
TOYOTA PRIUS 2010 BLOCK HEATER Preparation
TOYOTA PRIUS 2010 BLOCK HEATER Preparation Part Number: PU140-00900 Kit Contents 1 1 Cartridge heater 2 1 Cord set 3 1 Protector cover Hardware Bag Contents 1 1 Grease pack 2 6 Cable tie 3 4 5 6 Additional
Stirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
2002 Convertible Cloth Sleeve Convertible Cloth Attachment
2002 Glass Convertible Top on 2000-2001 Frame Submitted by Clovis, North Texas S2000 Owners Club So what s the difference? Honestly, not much. The 2000 soft top cloth has attachment points for each of
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
Products of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
PASCO PASCO PINCH VALVES
Pinch Valves 7 PASCO PASCO PINCH VALVES www.processautomationinc.net 126 1 General Pinch valve is simple in construct. It is made of three parts, i.e. body, pipe sleeve and actuator. Its superior performance
AKRAPOVIC SLIP-ON & SLIP-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 1000 (2005, 2006)
Installation instructions: *350154* AKRAPOVIC SLIP-ON & SLIP-ON STREET LEGAL EXHAUST SYSTEM for the SUZUKI GSX-R 1000 (2005, 2006) Congratulations on purchasing an Akrapovic exhaust system. Please read
ROLLERS UCK T TR PALLE
PALLET TRUCK ROLLERS 6 km/h 80-85 320-800 74 VULKOLLAN ROLLERS WITH STEEL CENTRE 400-1000 -20 / +80 180-450 6 km/h 80-85 320-800 75 TR POLYURETHANE ROLLERS WITH STEEL CENTRE 400-1000 -20 / +80 150-400
Polymer Electric. Product Information. DIY SE 1 TPE moulding technology. GmbH & Co. KG. Polymer Electric
Polymer Electric Product Information DIY SE 1 TPE moulding technology GmbH & Co. KG Polymer Electric Örlinger Straße 1 3 89073 Ulm GERMANY Tel. 49 731 20610 Fax 49 731 2061222 EMail: info.ulm@mayser.com
Strain relief devices
For optimum placement with dynamic use of cables Trademarks are legally protected for TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
Elevator parts. Supplier of spare parts for the international bulkhandling industry. Bechtel supplies various components for elevators:
Elevator parts Bechtel supplies various components for elevators: Elevator belting made of rubber or PVC Bucket bolts (DIN 15237) Pulleys Belt fasteners and belt clamps Various types of elevator buckets,
Honeywell Salisbury Outage Protection. Bushing Covers, Conductor Covers, Instant Insulation
Honeywell Salisbury Outage Protection Bushing Covers, Conductor Covers, Instant Insulation Why You Should Use Outage Protection The cost of animal caused outages to the utilities is preventable. Animals
SIZE TABLES In-Swing Doors and Sidelights
In-Swing Doors and Sidelights (311) (292) (362) (343) (413) (394) (851) (953) (1 124) (1 105) (1 718) (1 699) (1 924) (1 902) (2 226) (2 207) 1' 0 11 2 1' 2 1' 1 1 / 1' 4 1' 3 2' 10 2' 9 3' 1 3' 8 3' 7
Synchro-Power. Open-end and endless polyurethane synchronous belts. First class performance on both power transmission and linear applications
E2/20133 Synchro-Power Gates Synchro-Power polyurethane belts provide maximum power transmission combined with perfect tooth meshing and tight and accurate tolerances. Polyurethane is extremely wear and
Standard Rope Pull Switches. With and Without Latching Function SIEM2 SID SIN SGC SI88. The field of application for these rope pull switches includes
Standard Rope Pull Switches With and Without ing Function SEK SEM2 SIEM2 SD SID SID SIN SGC SI88 Because of their specifications governed by corresponding standards (see Cable Safety Pull Switches SRM/SR),
Construction. Product description:
Technical Data Sheet Edition 09.02 DS-Code: E 5161 Sikaflex - Tank Single-component elastic joint-sealing system for storage/ filling/handling facilities for water-polluting liquids, approval no. Z-74.6-6
XDP Complete EGR Race Track Kit w/up-pipe. Item Number: XD144
XDP Complete EGR Race Track Kit w/up-pipe Item Number: XD144 PACKING LIST: 2 - Lined 3/4" SS Hose Clamp 1-3/4 Silicone Hose 1 - XDP Engraved EGR Valve Block-Off Plate with O-ring 1 - EGR Cooler Block-Off
» Fermentation and storage barrel UF
» Fermentation and storage barrel UF Our fermentation and storage barrel UF can also be called universal barrel. Its use is really multifunctional. Mostly it is used for fermentation and storage, but also
Electrically Conductive Elastomer
Electrically Conductive Elastomer Product Overview Uvox conductive elastomers offer excellent shielding and environmental sealing. Conductive compounds can be extruded into various shapes and sizes. These