ROLLERS UCK T TR PALLE
|
|
- Derrick Long
- 6 years ago
- Views:
Transcription
1 PALLET TRUCK ROLLERS
2 6 km/h VULKOLLAN ROLLERS WITH STEEL CENTRE / km/h TR POLYURETHANE ROLLERS WITH STEEL CENTRE / PALLET TRUCK ROLLERS PAGE 258 PAGE POLYAMIDE 6 SOLID ROLLERS 77 TR POLYURETHANE ROLLERS WITH POLYAMIDE 6 CENTRE / km/h / +80 PAGE 266 PAGE THERMOPLASTIC POLYURETHANE ROLLERS WITH POLYAMIDE 6 CENTRE 79 TR-ROLL POLYURETHANE ROLLERS WITH STEEL CENTRE / km/h / +70 PAGE 270 PAGE
3 VULKOLLAN PALLET TRUCK ROLLERS WITH STEEL CENTRE Shore A Description Tyre: Vulkollan, hardness 93 Shore A: excellent values of rolling resistance and elasticity, highly resistant to wear, tear and deformations. 6 km/h / +80 Centre: obtained from a steel tube. Hub with shielded ball bearing with interference assembly in the seats obtained by precision machining of the centre; also available without bearings. Model with labyrinth seals: protective plasticrings, with interference assembly into the ball bearings. They ensure longer life, by preventing entry of dust and foreign bodies. Uses Excellent for use on electric pallet trucks, also in case of heavy loads and high speed handling (up to 16 km/h). Their excellent values of rolling resistance make the manual handling of heavy loads easier. Environments of use Designed for industrial environments, even in presence of alcohols, glycols, hydrocarbons. Not recoended in areas with organic acids and mineral acids, base solutions and saturated vapour. WEAK ACIDS STRONG ACIDS WATER ALCOHOL WEAK BASES STRONG BASES HYDROCARBONS SOLVENTS For information on the compatibility of the component wheel materials with specific aggressive chemical substances, see table at page 36. Floors Suitable for tiles and cement-resin. Not suitable if voluminous obstacles are present. OBSTACLES 258 Catalogue 02/2014
4 Force required to push or tow a wheel 100 kg 200 kg 300 kg 500 kg 600 kg 800 kg 1000 kg 80x x90 < 1 < x x70 < x80 < x90 < 1 < x100 < 1 < PALLET TRUCK ROLLERS For each load and diameter, the table indicates the force (in ) needed to push or tow a single wheel at the constant speed of on smooth flooring. For manual handling of a 4-wheeled trolley we recoend diameters that have values < 5, for frequent handling we recoend diameters with values < 3. Options available to order Rollers fitted with electrowelded brackets EE MHD 259
5 74 VULKOLLAN PALLET TRUCK ROLLERS WITH STEEL CENTRE Static 6 km/h kg CODE kg CODE With labyrinths Labyrinths: protective plastic-rings, with interference assembly in front of the ball bearings. They ensure longer life, protecting them from dust and foreign bodies that may limit the roller's free rotation. Static 6 km/h kg CODE Options available to order Rollers fitted with electrowelded brackets EE MHD Rollers with customised dimensions 260 Catalogue 01/2014
6 With Medium-duty labyrinths brackets M - max carrying capacity 500 TR Lab, we work for the future
7 "TR" POLYURETHANE PALLET TRUCK ROLLERS WITH STEEL CENTRE Shore A Description Tyre: TR polyurethane, hardness 95 Shore A, excellent values of rolling resistance and elasticity, highly resistant to wear. 6 km/h / +80 Centre: obtained from a steel tube: Hub with shielded ball bearing with interference assembly in the seats obtained by precision machining of the centre; also available without bearings. Model with labyrinth seals: protective plasticrings, with interference assembly into the ball bearings. They ensure longer life, by preventing entry of dust and foreign bodies. Uses Excellent for use on electric pallet trucks, also in case of heavy loads and high speed handling (up to 16 km/h). Their excellent values of rolling resistance make the manual handling of heavy loads easier. The model with electrowelded brackets allows handling heavy loads while maintaining a low centre of gravity. It is a coon solution to move set design in the show business sector. Environments of use Designed for industrial environments, even in presence of alcohols, glycols, hydrocarbons. Not recoended in areas with organic acids and mineral acids, base solutions and saturated vapour. WEAK ACIDS STRONG ACIDS WATER ALCOHOL WEAK BASES STRONG BASES HYDROCARBONS SOLVENTS For information on the compatibility of the component wheel materials with specific aggressive chemical substances, see table at page 36. Floors Suitable for tiles and cement-resin. Not suitable if voluminous obstacles are present. OBSTACLES 262 Catalogue 01/2014
8 Force required to push or tow a wheel 100 kg 200 kg 300 kg 500 kg 600 kg 800 kg 1000 kg 75 PALLET TRUCK ROLLERS 80x x x x x90 < x100 < 1 < x x70 < x80 < x90 < 1 < x100 < 1 < For each load and diameter, the table indicates the force (in ) needed to push or tow a single wheel at the constant speed of on smooth flooring. For manual handling of a 4-wheeled trolley we recoend diameters that have values < 5, for frequent handling we recoend diameters with values < 3. Available with brackets Electrowelded brackets EE MHD Maximum carrying capacity available diameters Top plate fitting. 263
9 75 "TR" POLYURETHANE PALLET TRUCK ROLLERS WITH STEEL CENTRE Static 6 km/h kg CODE kg CODE With labyrinths Labyrinths: protective plastic-rings, with interference assembly in front of the ball bearings. They ensure longer life, protecting them from dust and foreign bodies that may limit the roller's free rotation. Static 6 km/h kg CODE Options available to order 264 Catalogue 02/2014 Rollers with customised dimensions
10 Electrowelded brackets EE MHD - max carrying capacity 800 Medium-duty brackets M - max carrying capacity PALLET TRUCK ROLLERS 1) Plate: forged steel with integrated pin 2) Fork: deep-drawn legs electro-welded to the flange 3) Swivel actions: axial ball bearing and tapered roller bearing 4) Grease nipple 5) Anti-loosening system nut 6 km/h kg CODE kg CODE x x x x x x
11 POLYAMIDE 6 PALLET TRUCK ROLLERS Shore D / +80 Description Solid polyamide 6 pallet truck rollers, hardness 70 Shore D; excellent values of rolling and impact resistance. Reduced deformation under load. Hub with shielded ball bearings with interference assembly in the seats obtained by centre moulding; also available without bearings. Hub with plain bore hole which directly houses the axle. Uses Suitable for use on manual pallet trucks, also with humidity and highly aggressive chemical agents. Their excellent values of rolling resistance make the manual handling of heavy loads easier. It is specifically recoended for use in the food and canning industries. Environments of use Suitable for industrial environments, also in presence of humidity and chemical agents. Not recoended in areas with strong organic acids and concentrated mineral acids. WEAK ACIDS STRONG ACIDS WATER ALCOHOL WEAK BASES STRONG BASES HYDROCARBONS SOLVENTS For information on the compatibility of the component wheel materials with specific aggressive chemical substances, see table at page 36. Floors Suitable for tiles and cement-resin. Not recoended in presence of obstacles. They may damage fragile flooring. OBSTACLES 266 Catalogue 02/2014
12 76 Force required to push or tow a wheel 100 kg 200 kg 300 kg 500 kg 600 kg 800 kg 1000 kg PALLET TRUCK ROLLERS 82x x x90 < x100 < For each load and diameter, the table indicates the force (in ) needed to push or tow a single wheel at the constant speed of on smooth flooring. For manual handling of a 4-wheeled trolley we recoend diameters that have values < 5, for frequent handling we recoend diameters with values < 3. Static kg CODE kg CODE kg CODE kg CODE Options available to order Rollers fitted with 25 bore ball bearings 267
13 "TR" POLYURETHANE PALLET TRUCK ROLLERS WITH POLYAMIDE CENTRE 6 6 km/h Shore A Description Tyre: TR polyurethane, hardness 95 Shore A, excellent values of rolling resistance and elasticity, highly resistant to wear. Centre: polyamide 6. Hub with shielded ball bearings with interference assembly in the seats obtained by centre moulding; also available without bearings / +80 Uses Suitable for use on manual and electric pallet trucks, with speed up to 6 km/h. Their excellent values of rolling resistance make the manual handling of heavy loads easier. Environments of use Designed for industrial environments, even in presence of medium-harsh chemical agents. Not recoended in areas with strong organic acids and mineral acids. WEAK ACIDS STRONG ACIDS WATER ALCOHOL WEAK BASES STRONG BASES HYDROCARBONS SOLVENTS For information on the compatibility of the component wheel materials with specific aggressive chemical substances, see table at page 36. Floors Suitable for tiles and cement-resin. Not suitable if voluminous obstacles are present. OBSTACLES 268 Catalogue 02/2014
14 Force required to push or tow a wheel 100 kg 200 kg 300 kg 400 kg 500 kg 600 kg 77 PALLET TRUCK ROLLERS 82x x90 < x100 < x70 < x90 < For each load and diameter, the table indicates the force (in ) needed to push or tow a single roller at the constant speed of 4 km/h on smooth floor. For manual handling of a trolley choose diameters that have values < 5, for frequent handling choose values < 3 da N. Static 6 km/h kg CODE kg CODE Options available to order Rollers fitted with 25 bore ball bearings 269
15 THERMOPLASTIC POLYURETHANE PALLET TRUCK ROLLERS WITH POLYAMIDE CENTRE Shore D Description Tyre: thermoplastic polyurethane, hardness 60 Shore D, excellent values of rolling resistance and elasticity, highly resistant to wear and tear Centre: polyamide 6. Hub with shielded ball bearings with interference assembly in the seats obtained by centre moulding; also available without bearings. -15 / +80 Uses Suitable for use on manual pallet trucks, also with humidity and highly aggressive chemical agents. Their excellent values of rolling resistance make the manual handling of heavy loads easier. It is specifically recoended for use in the food and canning industries. Environments of use Suitable for industrial environments, also in presence of humidity and chemical agents. Not recoended in areas with strong organic acids and concentrated mineral acids. WEAK ACIDS STRONG ACIDS WATER ALCOHOL WEAK BASES STRONG BASES HYDROCARBONS SOLVENTS For information on the compatibility of the component wheel materials with specific aggressive chemical substances, see table at page 36. Floors Suitable for tiles and cement-resin. Not suitable if voluminous obstacles are present. OBSTACLES 270 Catalogue 02/2014
16 Force required to push or tow a wheel 100 kg 200 kg 300 kg 400 kg 500 kg 600 kg 700 kg 78 PALLET TRUCK ROLLERS 82x x70 < x80 < x90 < x100 < For each load and diameter, the table indicates the force (in ) needed to push or tow a single wheel at the constant speed of on smooth flooring. For manual handling of a 4-wheeled trolley we recoend diameters that have values < 5, for frequent handling we recoend diameters with values < 3. Static kg CODE kg CODE Options available to order Rollers fitted with 25 bore ball bearings 271
17 TR-ROLL PALLET TRUCK ROLLERS WITH STEEL CENTRE Shore A Description Tyre: TR-Roll polyurethane; hardness 75 Shore A; excellent rolling resistance and elasticity and good resistance to wear and tear. 6 km/h Centre: obtained from a steel tube. Hub with shielded ball bearing with interference assembly in the seats obtained by precision machining of the centre; also available without bearings. -20 / +70 Uses Excellent for use on electric pallet trucks, also in case of heavy loads and high speed handling (up to 12 km/h; for applications at higher speeds please contact Tellure Rôta). They guarantee silent running and vibration damping and are suitable also on uneven surfaces and in presence of obstacles. Their excellent values of rolling resistance make the manual handling of heavy loads easier. Environments of use Designed for industrial environments, even in the presence of alcohols, glycols, hydrocarbons. Not recoended in areas with organic acids and mineral acids, base solutions and saturated vapour. WEAK ACIDS STRONG ACIDS WATER ALCOHOL WEAK BASES STRONG BASES HYDROCARBONS SOLVENTS For information on the compatibility of the component wheel materials with specific aggressive chemical substances, see table at page 36. Floors Suitable for all types of industrial floors, even outdoors. Facilitates the overcoming of obstacles. It does not damage the floors. OBSTACLES 272 Catalogue 02/2014
18 Force required to push or tow a wheel 100 kg 200 kg 400 kg 500 kg 600 kg 700 kg 79 PALLET TRUCK ROLLERS 80x90 <1 1,5 3,5 4,5 5,5 82x ,5 82x70 <1 1,5 2,5 4 82x90 <1 1 2,5 3,5 4,5 82x100 <1 1,5 2,5 3 3,5 4,5 85x70 <1 1,5 2,8 5 85x80 <1 1,5 2,5 3,5 85x90 <1 1 2,5 3,5 4,5 85x100 < ,5 For each load and diameter, the table indicates the force (in ) needed to push or tow a single wheel at the constant speed of 4 km/h on smooth flooring. For manual handling of a 4-wheeled trolley we recoend diameters that have values < 5, for frequent handling we recoend diameters with values < 3. Static 6 km/h kg COD. kg COD , , , , , , , , , , , , , , , , , , Options available to order Rollers fitted with 25 bore ball bearings Rollers with labyrinths 273
RE.G1 Thermoplastic rubber wheels
RE.G1 Thermoplastic rubber wheels Elesa Standards Main dimensions Static load * Rolling resistance Dynamic carrying capacity Weight Code Description D d l 3 l 4 H B L s b 1 l 1 b 2 l 2 b 3 R d 1 d 2 [N]
More informationCastors and wheels. 1. GENERAL INFORMATION The wheel is a mechanical assembly in which sliding motion is replaced by rolling motion through
1. GENERAL INFORMATION The wheel is a mechanical assembly in which sliding motion is replaced by rolling motion through rotation around an axis. The wheel consists of the following components: the tread,
More informationHeavy duty wheels and castors with cast polyurethane tread Blickle Besthane Soft
Heavy duty wheels and castors with cast polyurethane tread 236 we innovate mobility www.blickle.com Table of Contents ALBS LK LKR LU LH LS Series Page ALBS 80-300 mm 180-1150 kg 238 239 LK-ALBS 80-200
More informationCastors and wheels.
ELESA S.p.A. Via Pompei 29 20052 Monza (Milano) ITALY Phone: +39 039 28 11.1 Fax: +39 039 83 63 51 www.elesa.com info@elesa.com www.elesa-ganter.com OTTO GANTER GmbH & Co.KG Triberger Straße 3 78120 Furtwangen
More informationHeavy duty wheels and castors with cast polyurethane tread Blickle Besthane
Heavy duty wheels and castors with cast polyurethane tread 266 we innovate mobility www.blickle.com Table of Contents VSB/GB LU LH LS LSD Series Load capacity Page VSB/GB 80-1000 mm 400-30000 kg 268/269
More informationWHEELS & FEET CATALOGUE
Ashley Power Ltd. 86 Ashley Road Parkstone Poole Dorset, BH 0AQ WHEELS & FEET CATALOGUE Tel: + (0) 0 73 Fax: + (0) 0 78 Email: sales@ashleypower.co.uk R Wheels, Castors & Feet R TEL: 00 73 FAX: 00 78 EMail:
More informationWheels and castors with pneumatic tyres
Wheels and castors with pneumatic tyres 190 we innovate mobility www.blickle.com Table of Contents P L LS Series Load capacity Page P 180-490 mm 50-525 kg 192/193 194 L-P 200-20 mm 75-250 kg LS-P 400-415
More informationSwivel bracket series (combined with the respective wheel series) For matching fixed castors, refer to the corresponding catalogue pages.
Contents: Section series Swivel bracket series (combined with the respective wheel series) For matching fixed castors, refer to the corresponding catalogue pages. L LK LKR LH LO ALST Series ALST 100-250
More informationCASTORS. For more information: Tel: Fax: Visit our website:
Page 163 Industry Leaders Established 1977 For more information: Email: sales@lgtools.co.za Tel: +2731 717 6800 Fax: +2731 717 6868 Visit our website: www.lgtools.co.za White Nylon White Nylon Loose Wheel
More informationBasic Wheel Types ( ) Cushion or Hard Rubber W/Side Plates. Advantage TPR Round and Flat. Polyolefin Phenolic Polyloc Grey and Blue
Basic Types ( ) Cushion or Hard Rubber Conductive Rubber Cushion or Hard Rubber W/Side Plates Advantage TPR Round and Flat Advantage Heat Round and Flat Red Advantage Health Antimicrobial Flat Welded Disc
More informationCASTORS & WHEELS CATALOGUE
CASTORS & WHEELS CATALOGUE www.castorsandwheels sw.co.uk Power Transmission South West 2015 All rights reserved. No part of this publication may be reprinted or reproduced or utilised in any form or by
More informationProfile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
More informationCast iron wheels and castors
Cast iron wheels and castors 318 we innovate mobility www.blickle.com Table of Contents G L LK LU LH LT LO LS Series Page G 80-250 mm 250-1400 kg 320 321 L-G 80-200 mm 200-350 kg LK-G 80-200 mm 250-600
More informationSecure footing. Easy levelling. Blickle levelling castors with integrated truck lock
Secure footing. Easy levelling. Blickle levelling castors with integrated truck lock www.blickle.com 2 we innovate mobility www.blickle.com Blickle levelling castors Sturdy in use. Easy to use. The right
More informationUTILITY SERIES PLATE CASTORS PAGE 1 PAGE 2 PAGE 3 PAGE 4 PAGE 5 ZINC DUROLITE PLATE SERIES CHROME DUROLITE BOLT SERIES CHROME DUROLITE PLATE SERIES
FURNITURE CASTORS UTILITY SERIES BOLT CASTORS UTILITY SERIES PLATE CASTORS UTILITY SERIES TWIN WHEEL CASTORS CASTORS LIGHT INDUSTRIAL SERIES CASTORS PAGE 1 PAGE 2 PAGE 3 PAGE 4 PAGE 5 SINGLE BOLT ZINC
More informationL I F T I N G C A R T S
L I F T I N G C A R T S LIFTING CARTS The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationFOOD PROCESSING INDUSTRY
H VARLEY LIMITED CASTORS AND WHEELS CATALOGUE FPI16.1 products for the FOOD PROCESSING INDUSTRY Easy product selection! Ask for a site survey, our technical sales team will make an inventory of the products
More informationCASTORS & WHEELS WDS SECTION 20 - CASTORS & WHEELS. Levelling Castors. Furniture Castors. Stainless Steel & Zinc Plated Brackets.
CASTORS & WHEELS Furniture Castors Nylon Castors Rubber Castors High Temperature Phenlic Resin Castors Stainless Steel & Zinc Plated Brackets Heavy Duty Castors Light Duty Castors Levelling Castors Individual
More informationWheels and castors with soft rubber tyres and two-component solid rubber tyres
Wheels and castors with soft rubber tyres and two-component solid rubber tyres 152 we innovate mobility www.blickle.com Table of Contents VW L LK Series Page VW 125-260 mm 15 155 L-VW 125-260 mm VWPP Series
More informationO P E R A T I N G M A N U A L
O P E R A T I N G M A N U A L - Original - A 5615-2 / Rolltrailer 60 100t Page 1 / 18 Product Seacom Rolltrailer RT 60 100t Serial no. A 5615-2 / 1-35 Customer Grimaldi - Italy Supplier Transport Systems
More informationTri Fische Wheels & Castors (M) Sdn. Bhd. 406 SERIES. Scaffolding Castor. 1 of 22
Tri Fische Wheels & Castors (M) Sdn. Bhd. 406 SERIES Scaffolding Castor 1 of 22 2 of 22 510 SERIES J505 SERIES 3 of 22 4 of 22 507E SERIES 428E SERIES 5 of 22 728 SERIES EXPANDING STEM 6 of 22 PALLET TRUCK
More informationiglidur J The Fast and Slow Motion Specialist
iglidur The Fast and Slow Motion Specialist Used in long-life applications, also with soft shafts. The iglidur plain bearings are designed for the lowest coefficients of friction while running dry and
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationGENERALE TECHNICAL DATA
GENERALE TECHNICAL DATA./02 Compressed air The cylinders have been designed for use with unlubricated air, in which case no maintenance is required. If lubricated air is used, lubrication must be continuous
More informationCasters: Do They Matter? Making the Right Selection
Casters: Do They Matter? Making the Right Selection Sponsored by: Presented by: Brad Kish Marketing Manager, Colson Group Keith Kouba E.R. Wagner Mfg. Co. 2013 MHI Copyright claimed as to audiovisual works
More informationPlate Caster Technical Data
InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA 18705 www.metro.com Plate Caster Technical Data CATALOG Hi-Modulus (Resilient) Rubber Plate Casters CONT. OPER. B5DN B5DNB B5DNR
More informationCaster. Terms. Swivel Radius. Tread Width. Floor Surfaces Easy Reference Wheel Selection Guide Operating Conditions.
s & Casters This reference chart will assist you in selecting the proper Caster and for your specific industry requirements. Caster Terms and Terms on the right label the component parts of a standard
More informationFront Suspension. Front Suspension Component Layout. NOTE: Without Dynamic Response version shown
Published: Jan 25, 2005 Front Suspension Front Suspension Component Layout NOTE: Without Dynamic Response version shown 1 Flanged bolt (Upper arm forward bush) 2 Bush - forward (Upper arm) Page 1 of 9
More informationXL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL
XL/127-PLAST-SL - VERTICAL LEVEL GAUGES 5 WITH MIN LEVEL ELECTRICAL SIGNAL -Thermoplastic level gauges made of transparent polyamide with good mechanical resistance, are compatible with mineral oil, gasoline,
More informationRoll-Tech Molding Products, LLC
Roll-Tech Molding Products, LLC 243 Performance Drive SE Hickory, North Carolina 28602-4046 U.S.A. Toll Free: 866.431.4515 Fax: 828.431.4450 sales@rolltech.net www.roll-tech.net Roll-Tech proudly uses
More informationCastors run smoothly round the clock Industrial Castors
Castors run smoothly round the clock Industrial Castors The World in Motion. Castors run smoothly round the clock Industrial Castors Tente stands for innovative and high-quality products around the clock.
More informationTread Wheels. Polyurethane. Polyurethane Professional Introduction. XP X-treme Plus Solid Elastomer Wheel, Capacities to 2500 lbs.
Item Page Polyurethane Professional... 163 Introduction Vulkollan Polyurethane s... 164 Introduction VY Vulkollan Polyurethane on... 165 Cast Iron s Capacities to 6925 lbs. Item Page XP X-treme Plus Solid
More informationLF 3800/LF 3900 Push-In Fittings Range
LF 300/LF 3900 Push-In Fittings Range Stud Fittings Straights 305 3905 BSPT Page 1-79 305 Page 1-79 301 3901 BSPP/Metric Page 1-79 321 3921 BSPT Page 1-0 321 3921 Page 1-0 331 3931 BSPP/Metric Page 1-0
More informationSource: Staatsoper Hamburg STAGE TECHNOLOGY
Source: Staatsoper Hamburg STAGE TECHNOLOGY Theater Paderborn Westfälische Kammerspiele REDISCOVER THE WHEEL 2 Source: hertzer GmbH, Urheber Dipl.-Ing. Andreas Guhl Staatstheater Stuttgart Produktion:
More informationCompact and levelling castors
Compact and levelling castors 418 w e i n n o v a t e m o b i l i t y Table of Contents POA LRA/LKRA LPA/LKPA LER/LE LR/L LKR/LK LH/LHD LSD LD HRLH/ HRLHD HRIG HRP/ HRSP POA 35-150 mm 75-280 kg 104 420/4
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationiglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
More informationOUR CLIENTS. We are a member of:
AVIATION TECHNOLOGY OUR CLIENTS IT S TIME TO REINVENT THE WHEEL All wheels have one thing in common they are round. Looking beyond this, however, every area of application has its own specific requirements
More informationCaster Type...Page. 8K Kingpinless Casters KDW Dual Wheel Kingpinless Casters KSL Spring Loaded Casters
8 EXTRA HEAVY DUTY CASTERS Caster Type...Page 8K Kingpinless Casters...2-5 8KDW Dual Wheel Kingpinless Casters...6-7 8KSL Spring Loaded Casters... 8-9 ALL WHEELS ARE AVAILABLE WITH PRECISION BALL BEARING,
More informationGeneral Catalogue G14
General Catalogue G14 Copyright Blickle Räder+Rollen GmbH u. Co. KG Reprint and reproduction, including extracts, is not be permitted without explicit approval. 3 1 2 3 4 Blickle Your Partner Wheels and
More informationstainless steel compression fittings
compression fittings principle of compression fittings egris has used its long experience of brass compression fittings to develop a range of compression fittings. These fittings are resistant to aggressive
More informationAssembly and Maintenance Instructions. Pad Thrust Bearings
Assembly and Maintenance Instructions for Pad Thrust Bearings 1. General Assembly Regulations The bearings are delivered as fully assembled units. Roller bearings are pre-lubricated at the factory with
More informationDeep groove ball bearings L12DDU. Polyolefin is used for packaging food in supermarkets, replacing dioxin-generating vinyl chloride.
Bearings Environmentally friendly Bearings offer high performance in water- and dust-contaminated environments. Enhanced strength makes these ever-evolving bearings ideal for high-speed. Bearings 22311L12CAM
More information3947 en / b
3947 en - 06.2006 / b FOOD INDUSTRY Drive systems As a worldwide specialist in drive systems, industrial processes and generators, LEROY-SOMER has supported its customers evolving needs for more than 80
More informationOUR CLIENTS. We are a member of:
AVIATION TECHNOLOGY OUR CLIENTS REDISCOVER THE WHEEL All wheels have one thing in common they are round. Looking beyond this, however, every area of application has its own specific requirements in terms
More informationA6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
More informationStem Caster Technical Data T11.20
InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA 18705 www.metro.com Stem Caster Technical Data CATALOG HDC3B 2-3/8 (60mm) HDC3BB 2-3/8 (60mm) HDC5B 4 (102mm) HDC5BB 4 (102mm)
More informationBPW turntables with double ball race
PW THE QUALITY FACTOR Load-carrying ball Holding ball PW turntables with double ball race PW turntables with double ball race The no. 1 in system comparison Compared to conventional, single-row systems,
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully
More informationproduct overview PEVOLON PEVOLASTIC
product overview PEVOLON WHEELS AND CASTORS PEVOLON is a thermoplastic material based on polyamide. PEVOLON wheels have high abrasion resistance, a low friction coefficient, high load capacities and a
More informationHAND PALLET TRUCK lbs OPERABILITY/PERFORMANCE EASE OF SERVICE ERGONOMICS COMMITMENT RELIABILITY/DURABILITY WARRAN TY
HAND PALLET TRUCK 5000 lbs TOYOTA'S RUGGED YET LIGHTWEIGHT HAND PALLET TRUCK, DESIGNED TO MEET AND EXCEED THE DEMANDS OF YOUR TOUGHEST WORKPLACE. OPERABILITY/PERFORMANCE A 2.9" LOW PROFILE CONSTRUCTION,
More informationVulkollan & Polyamide Combined Bearings
Vulkollan & Polyamide Combined Bearings Features of Vulkollan & Polyamide Combined Bearings Silent Operation, 8 Profile/Bearing sizes Travel Speeds up to 16 Ft/sec Low Friction from 2RS seals on Ball Bearings
More informationDouble-row ball bearings
Double-row ball bearings Radial double-row ball bearings 262 Definition and capabilities 262 Series 262 Tolerances and clearances 262 Design criteria 263 Suffixes 263 Characteristics 264 Radial double-row
More informationSEALING SOLUTIONS FOR YOUR DRIVES
Intelligent Drivesystems, Worldwide Services SEALING SOLUTIONS FOR YOUR DRIVES EN SEALING SYSTEMS FOR NORD GEAR UNITS AND GEARED MOTORS SEALING SYSTEMS FOR NORD GEAR UNITS AND GEARED MOTORS NORD DRIVESYSTEM
More informationRANGE OF BEARINGS FOR FORKLIFT TRUCKS AND PALLET TRUCKS
RANGE OF BEARINGS FOR FORKLIFT TRUCKS AND PALLET TRUCKS Catalogue v.1 Date: 24/09/2004 Edition: 12 issues INDEX PAGE CHAIN GUIDE BEARINGS 1 CLASSIFIED BY SHAPE 1 CLASSIFIED BY BORE DIAMETER 2 MAST GUIDE
More informationSECTION ZF FRONT AXLE
04-101.01/ 1 2011JA14 SECTION 04-101.01 6 3 5 1 2 9 1. Upper radius rod 2. Lower radius rod 3. Caliper 4. BRAKE Disk 5. Pneumatic connector 6. Hub 7. steering knuckle 8. Grease Fitting 9. Pneumatic connector
More informationTyres and press-on bands
Tyres and press-on bands 472 we innovate mobility www.blickle.com Table of Contents BSEV Series Tyre Ø Load capacity Page BSEV 0-5 mm 400-1885 kg 474 BEV Series Load capacity Page BEV 1-620 mm 160-4650
More informationUrethane. Ralphs-Pugh Urethane Products
Ralphs-Pugh Products elastomers are unique because they combine many of the advantages of rigid plastics, metals and ceramics with the elasticity of rubber. resists abrasion and reduces the affects of
More informationComponents: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
More informationTyres and Wheels for Light Service
Tyres and Wheels for Light Service Tyres for Light service The tyres for light service are designed for farming, industry, turf, snow and high speed service and are suitable for rims up to 16 inches in
More informationBACKLASH FREE AND STANDARD JAW COUPLING
BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety 10-2018 GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel
More informationComponents: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
More informationDOUBLE-ROW BALL BEARINGS CUSTOMISED BALL BEARINGS
DOUBLE-ROW BALL BEARINGS CUSTOMISED BALL BEARINGS SUBSCRIBE TO NSK NEWSLETTER As one of the world s leading manufacturers of rolling bearings, linear technology components and steering systems, we can
More informationNew solutions for the food industry
New solutions for the food industry The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings
More informationMULTI-ADJUSTABLE PEDESTAL FEET
MULTI-ADJUSTABLE PEDESTAL FEET A-Justa-Foot The A-Justa-Foot is a revolutionary heavy-duty multi-adjustable pedestal foot, ideal for industrial, commercial, workshop or food industry applications (MAF
More informationWESCO INDUSTRIAL PRODUCTS, INC. Scale Pallet Truck. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Scale Pallet Truck Part Number: 272936 & 272938 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. Page 1 of 16 TABLE
More information...our linkages, your solution. Rod Ends
...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain
More informationFlexibility and strength
polyurethane and Flexibility and strength : Polyester Polyurethane or Polyamide PA12 Supply of air to pneumatic components Flexible and long lasting Excellent memory: returns to original shape Pressure
More informationMounting and dismounting
Mounting and dismounting General information... 258 Where to mount... 258 Preparations for mounting and dismounting... 258 Bearing handling... 260 Mounting... 261 Mounting bearings with a cylindrical bore...
More information15. Bearing Handling Storage Fitting A-97
15. Bearing Handling Bearings are precision parts, and in order to preserve their accuracy and reliability, care must be exercised in their handling. In particular, bearing cleanliness must be maintained,
More informationPNEUMATIC CASTERS CAPACITY RANGE LBS
CAPACITY RANGE 200-60 LBS 2 Series Pneumatic Common Applications: Indoor/Outdoor Carts Delicate Cargo Carts Outdoor Platforms & Stages Dollies Hospitality Carts Nursery Carts Excellent for Uneven or ugh
More informationFor more ergonomic workplaces. ErgoMove 1000 and ErgoMove The Electric Drive Systems from Blickle.
. For more ergonomic workplaces. ErgoMove 000 and ErgoMove 000. The Electric Drive Systems from Blickle. Content Blickle. A company in motion. The ErgoMove principle of added value. Overview: ErgoMove
More informationAdjustable Pedestal Feet
Adjustable Pedestal Feet A-Justa-Foot Multi-adjustable Pedestal Feet The A-Justa-Foot is a revolutionary heavy-duty multi adjustable pedestal foot, ideal for industrial commercial, workshop or food industry
More informationIndex. The Benefits of Experience 2. Design and Manufacture 3. Quality 3. Slides and Hooks 4-7. Gambrels & S Hooks 8. Beef Rollers 9.
Index The Benefits of Experience 2 Design and Manufacture 3 Quality 3 Slides and s 4-7 Gambrels & S s 8 Beef Rollers 9 Bleeders 10 Other Components 11-12 Notes on 13 Page 1 The Benefits of Experience.
More informationEURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE. Tel: +44 (0)
COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE email: sales@euro-bearings.com Tel: +44 (0)1908 511733 2015 CATALOGUE CONTENTS COMBINED ROLLER BEARINGS Standard CR Bearings Eccentric Adjustable
More informationWe develop and produce wheels and castors that serve a wide range of industries. Products, that offer our customers security and reliability.
CATALOGUE We develop and produce wheels and castors that serve a wide range of industries. Products, that offer our customers security and reliability. Our claim is to achieve the highest quality and perfection
More informationPlastic Wheels and Castors
WHEELS. CASTORS. CONVEYOR TECHNIQUE ALLERTSHAEUSER STR. 6 D-35469 ALLENDORF/LDA. TEL. +49 (6407) 9105-24 FAX +49 (6407) 919105-55 55 Plastic Wheels and Castors 6.1 Plastic Wheels LINE KLG KLR Made of high
More informationFU-X/FS-X Technical Data.
@ FU-X/FS-X Technical Data. Rider seated Low lift pallet truck. FU-X 20 FS-X 33 2 FU-X 20 TECHNICAL DATA. This specification sheet to VDI Guidelines 2198 gives the technical figures for the standard truck.
More informationExtra Heavy Duty Casters 09
Extra Heavy Duty Casters 09 Series Caster Type...Page # 9-95BBL Kingpin - Hot Forged...2-3 9-95TRL Kingpin - Hot Forged...4-6 9-95K Kingpinless...7-9 9-95KHD Kingpinless HD...10-12 9-95K/DW Kingpinless
More informationO P E R A T I N G M A N U A L
O P E R A T I N G M A N U A L - Original - A 5526-4 / Rolltrailer 60 100t Page 1 / 19 Product Seacom Rolltrailer RT 60 100t Serial no. A 5526-4 / 1-33 Customer Grimaldi - Italy Supplier Transport Systems
More informationCarrier rollers product overview
F 2 Carrier rollers product overview TORWEGGE carrier rollers Page Series F 4 Technical information F 6 Coatings / Axles F 9 Steel and plastic carrier rollers F 12 Carrier and conveyor belt rollers F 17
More informationInstallation Procedures
For the precision ball and roller bearings supplied by MRC Bearings, skill and cleanliness while handling, mounting and dismounting are necessary to ensure satisfactory bearing performance. As precision
More informationProfiles and tyres. The Wheels. Wheels 07 Wheels 08 Wheels 09 Wheels 13 Wheels 14 Wheels 17 Wheels 18 Wheels 21. Types
The Wheels. Wheel 00 Wheels 0R Wheesl 0S Wheels 01 Wheels 03 Wheels 04 Wheels 06 Wheels 07 Wheels 08 Wheels 09 Wheels 13 Wheels 14 Wheels 17 Wheels 18 Wheels 21 Wheels 27 Wheels 29 Wheels 30 Wheels 32
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationDURARO. Stainless Steel Castors
Stainless Steel Castors Application: Kitchen trolleys; food carts; food processing plants; restaurants and commercial kitchens; laboratory equipments. Size Available: 75x32, 100x32, 125x32, 150x32, 200x32mm
More informationWhen choosing casters, users frequently look at the capacity ratings to help
C STERS When choosing casters, users frequently look at the capacity ratings to help them through the selection process. Typically, caster ratings are based on stationary loads or loads that are moved
More informationAdjustable Pedestal Feet
Adjustable Pedestal Feet A-Justa-Foot Multi-adjustable Pedestal Feet The A-Justa-Foot is a revolutionary heavy-duty multi adjustable pedestal foot, ideal for industrial commercial, workshop or food industry
More informationiglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
More informationOne-way Clutches Tension Pulleys, Bottom Roller Bearings
One-way Clutches Tension Pulleys, Bottom Roller Bearings One-way clutches One-way Clutches This is a compact and roller type one-way clutch which formed a cam face on its outer ring. (Available shaft diameter
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationComponents: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
More informationDURARO. Stainless Steel Castors
Stainless Steel Castors Application: Kitchen trolleys; food carts; food processing plants; restaurants and commercial kitchens; laboratory equipments. Size Available: 75x32, 100x32, 125x32, 150x32, 200x32mm
More information12.1 SINGLE ROW BALL BEARINGS
12.1 SINGLE ROW BALL BEARINGS Due to the versatility of applications, single row ball bearings are among the most frequently used types of rolling bearings. They are made as non-separable without a filling
More informationCATALOGUE MEDIUM TO HEAVY DUTY IDLER
CATALOGUE MEDIUM TO HEAVY DUTY IDLER Sandvik Materials Handling PULLEYS, IDLERS AND MATERIALS HANDLING SYSTEMS INDEX 3 ROLL INLINE CARRY & IMPACT PAGE 3 3 ROLL INLINE PLAIN P/A TRAINER PAGE 5 SINGLE ROLL
More informationRANGE of. Pallet Trucks and Hand Trucks
RANGE of Pallet Trucks and Hand Trucks Handling your world The Manitou Group was founded by the Braud family more than 60 years ago. Today, the Manitou Group is the world leader in all-terrain material
More information3 Axles and brakes. 3.1 Function and construction of the axles Construction Function
3 Axles and brakes 3.1 Function and construction of the axles 3.1.1 Function Each wheel has an independent suspension system in the axle body (1), so that individual wheel suspension is provided. The swinging
More informationMaintenance and lubrication products
Maintenance and lubrication products Mechanical tools... 1070 Hook and impact spanners... 1070 Lock nut spanners and axial lock nut sockets... 1070 Bearing fitting tools... 1070 Jaw pullers... 1071 Strong
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationCrossed Roller Ways. Description of each series and Table of dimensions. Anti-Creep Cage Crossed Roller Way
Crossed Roller Ways Description of each series and Table of dimensions Crossed Roller Way Page - to -7 Anti-Creep Cage Crossed Roller Way Page - to - Crossed Roller Way Unit Page - to - In the table of
More informationPEDESTRIAN POWERED PALLET TRUCKS P KG
PEDESTRIAN POWERED PALLET TRUCKS P1.6-2.2 1 600 2 200 KG P1.6, P1.8, P2.0, P2.2 DISTINGUISHING MARKS 1.1 Manufacturer (abbreviation) 1.2 Manufacturer s type designation 1.3 Drive: electric (battery or
More information