MACHINE MODEL MODELO DE MÁQUINA FRONTAL TURRET TORRETA FRONTAL ROTATING DIAMETER DIAMETRO DE ROTACION F: INTERNAL NUT / TUERCA INTERNA
|
|
|
- George Manning
- 6 years ago
- Views:
Transcription
1 YUNDAI - WIA VDI - MACINE DE MÁQUINA FRONTAL TURRET TORRETA FRONTAL SKT 15 LM / SKT 15 LMS ( 5482) SKT 21 LM / SKT 21 LMS ( 5482) SKT 28 LM / SKT 250 SY ROTATING DIAMETER DIAMETRO DE ROTACION F: INTERNAL NUT / TUERCA INTERNA TOOL LENGT ERRAMIENTA 1 ER : : (Ø 22) :
2 TOOL LENGT ERRAMIENTA : (Ø 22) :
3 YUNDAI - WIA MACINE DE MÁQUINA SKT 160 TTSY SKT 180 TTSY BMT - 55 MAIN AND SECONDARY SPINDLE CABEZAL PRINCIPAL Y SECUNDARIO MAX ROTATING DIAMETER DIAMETRO MAX. DE ROTACION F: INTERNAL NUT / TUERCA INTERNA TOOL LENGT ERRAMIENTA : : int. / ext : : int. / ext (Ø 22) :
4 TOOL LENGT ERRAMIENTA : : int. / ext opposite contrario : r3 6 OFS : : int. / ext LT-T opposite contrario ER16-F (Ø 1-10) : r2 Ø TOOL Ø ERRAMIENTA MAX MAX MAX MAX MAX FEED PUSING EMPUJE MÁXIMO ERRAMIENTA (N.) STROKE CARRERA EFFECT. WORKING STROKE CARRERA DE TRABAJO Y AXIS ADJUSTMENT AJUSTE EYE Y ± 0.4 Ø * 17.5* no clockwise rotation rotación oraria Ø * 17.5* no * Follow the use and maintenance instruction / Siga las instrucciones de uso y mantenimento 65
5 YUNDAI - WIA SKT 250 MS / SKT 300 MS MACINE SKT 200 TTSY / SKT 250 TTSY DE MÁQUINA SKT V5 R LM BMT - 65 MAIN AND SECONDARY SPINDLE CABEZAL PRINCIPAL Y SECUNDARIO MAX ROTATING DIAMETER DIAMETRO MAX. DE ROTACION ERRAMIENTA TOOL LENGT ER : : : int. / ext (Ø 22) : F: INTERNAL NUT / TUERCA INTERNA
6 TOOL LENGT ERRAMIENTA : : int. / ext (Ø 22) : : : int. / ext OFS : : int. / ext LT-T opposite contrario ER16-F (Ø 1-10) : r2 67
7 YUNDAI - WIA MACINE DE MÁQUINA SKT 0 LMC / SKT V80 RM BMT - 75 MAIN SPINDLE CABEZAL PRINCIPAL MAX ROTATING DIAMETER DIAMETRO MAX. DE ROTACION F: INTERNAL NUT / TUERCA INTERNA TOOL LENGT ERRAMIENTA 1 ER-F (Ø 4-26) : ER-F (Ø 4-26) : int. / ext (Ø 27) : OFS : : int. / ext
8 TOOL LENGT ERRAMIENTA 4 ER-F (Ø 4-Ø 26) : ER-F (Ø 4-Ø 26) : int. / ext (Ø 27) : : : int. / ext LT-T opposite contrario ER20-F (Ø 2-13) : r2 69
9 YUNDAI - WIA BMT - 85 MACINE DE MÁQUINA MAIN SPINDLE CABEZAL PRINCIPAL SKT 700 LM MAX ROTATING DIAMETER DIAMETRO MAX. DE ROTACION F: INTERNAL NUT / TUERCA INTERNA TOOL LENGT ERRAMIENTA 1 ER50 (Ø 7-34) : ER50 (Ø 7-34) : int. / ext (Ø 32) : OFS : : int. / ext
10 TOOL LENGT ERRAMIENTA : = r3 9 ER20-F (Ø 2-13) in / entrada 5000 out / salida in / entr. 50 out / sal. 25 1: int. / ext : : int. / ext OFS : int. / ext in / entrada 00 out / salida 2000 in / entrada 00 out / salida 2000 in / entr. 60 out / sal. 120 in / entr. 60 out / sal : : int. / ext LT-T opposite contrario ER : r2 71
BARUFFALDI TBMA 160 VDI - 30 MACHINE MODEL MODELO DE MÁQUINA MODEL MODELO FRONTAL TURRET / TORRETA FRONTAL TBMA 160 LEFT TURRET TORRETA IZQUIERDA
BARUFFALDI MACINE MODEL FRONTAL TURRET / TORRETA FRONTAL TBMA 160 DE MÁQUINA TBMA 160 VDI - 30 RIGT TURRET TORRETA DERECA LEFT TURRET TORRETA IZQUIERDA MAX ROTATING DIAMETER DIAMETRO MAX. DE ROTACION ERRAMIENTA
DOOSAN PUMA TOOLHOLDERS BMT45/55/65/75 TOOLHOLDERS FOR CNC LATHES CNC-DREHEMASCHINEN PORTE-OUTILS POUR TOURS CNC PORTAUTENSILI PER TORNI CNC
COMPONENTI INNOVATIVI TECNOMECCANICI TOOLHOLDERS FOR CNC LATHES CNC-DREHEMASCHINEN PORTE-OUTILS POUR TOURS CNC PORTAUTENSILI PER TORNI CNC 数控车床刀柄 BMT, BOLT-ON, VDI DIN69880 TOOLHOLDERS BMT45/55/65/75 SPECIAL
DRIVEN and STATIC TOOLING For DOOSAN BMT45
DRIVEN and STATIC TOOLING For DOOSAN BMT45 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com June
TOOLING KITS. July 2018 INCLUDES OKUMA TOOLING COMMONALITY CHARTS!
INCLUDES OKUMA TOOLING COMMONALITY CHARTS! July 08 TOOLING KITS www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty VELOCITY TOOLING KITS Velocity Tooling:
T R A V I S C N C GENERAL CATALOGUE
T R A V I S C N C GENERAL CATALOGUE Linear G M A C ENG ESP POR UNIT MM-4 M-800SL Table surface Superficie de la mesa Superfície da mesa mm 800 x 250 960 x 460 Axes travel: X / Y / Z Carrera eje X / Y /
Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA
55 21.65 1 47 c te ca Me 40 77 LIVE DOOSAN 12 80 54 N 9b DI 8/ O 0x1 CC x3 TA 0.8 AT 6x 16 W1 67 55 18 4 11 7 MACHINE AMERICA 20 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
CLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8
CLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8 This series corresponds to the latest of the pneumatic clutch-brakes developed by GOIZPER. One of its main characteristics is that it obtains the maximum
ANGELUS 40P CATÁLOGO REPUESTO. Ezquerra. Grupo Ezquerra. Cerradoras López Galicia, s.l. Somme
CATÁLOGO REPUESTO Talleres Seamers, s.l. Somme S O M M E T R A D E, S. L. C O M E R C I A L Somme, s.l. López Galicia Cerradoras López Galicia, s.l. Somme MAROC, S.A.R.L. Índice GRUPO PÁGINA 40PB001.01...
COMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS
COMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS www.sternhidraulica.com Características técnicas Technical characteristics Los actuadores rotativos generan un par de torsión a través de una rueda dentada
AMADA EMZ 3510 NT. KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)
AMADA EMZ 3510 NT KISTNER GmbH & Co. KG Industriestraße 7-9 D-95349 Thurnau Tel. (+49) 98 987-0 info@maschinen-kistner.de www.maschinen-kistner.de LIST OF CONTENTS Machine info........... Technical data........
July 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
That s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
![That s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance](/thumbs/78/77861134.jpg "That s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance")
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
ANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
Driven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
BMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
July 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
SERIE CHR ESPERIA S.A. Cilindros Hidraúlicos Hydraulic Cylinders. Presión de trabajo Working pressure 160 bar
SERIE Cilindros Hidraúlicos Hydraulic Cylinders Presión de trabajo Working pressure 160 bar ESPERIA S.A. ESPERIA S.A. SERIE ÍNDICE INDEX Pág./Page - Índice / Index... 2 - Características / Specifications...
Experienced people, innovative technologies
Experienced people, innovative technologies T r a d i t i o n a n d i n n ovat i o n, o u r k e y s to s u c c e ss In the Machine Tool field since 1952, Duplomatic Automation offers innovative and flexible
VictorTaichung. Art of Smooth Performance. Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel
R VictorTaichung Art of Smooth Performance Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel Victor Taichung an established ISO 91 & 141 company Smooth
Actuator Units NEW All-in-one-solution
Actuator Units NEW All-in-one-solution Axis Servo Motor Amplifier Actuator Units Economy Series ES4 p. 06-07 ES6 p. 08-09 EC3 p. 10-11 EC4 p. 12-13 LM Guide Actuator KR26 p. 16-17 KR33 p. 18-19 Linear
Typhoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
Specifications Application For medium materials For heavy materials For extra heavy materials
LT2 B875 Mark II Twin Needle Needle Feed Split Needle Bar Lock stitcher with Large Hook (and Thread Trimmer) Specifications 3 5 7 Application For medium materials For heavy materials For extra heavy materials
DOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
April 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
July 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
½ INDUSTRIAL DUTY AIR RATCHET
½ INDUSTRIAL DUTY AIR RATCHET Model GETTING STARTED OPERATION ½ Industrial Duty Air Ratchet Owner s Manual GETTING STARTED OPERATION Model Free Speed (RPM) Square Drive Size Max. Torque Air Inlet (NPT)
Actuator LA23 DESKLINE. Data sheet LINAK.COM/DESKLINE
Actuator LA23 DESKLINE Data sheet LINAK.COM/DESKLINE LA23 DESKLINE The LA23 is a small and strong push actuator (up to 2500 N). The LA23 can be used in various applications where size is important. The
KF5600. HYUNDAI WIA Vertical Machining Center
HYUNDAI WIA Vertical Machining Center Technical Leader The Vertical Machining Center, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining
I.T TMY-B* series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION ISSUED
TMY-B series 11 TURN-MILL TURRET WITH Y-AXIS (PATENTED) TECHNICAL INFORMATION I.T. 6471 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 03-09 / series 11 MAIN
BMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
GTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
VERTICAL TURNING CENTER SKT-V3R/L SKT-V5R/L
VERTICAL TURNING CENTER SKT-V3R/L SKT-V5R/L Vertical Turning Center World Top Class Quality 620mm ( 24.41) 24m/min 3,000rpm 18.5/15kW (25/20HP) 8EA [12EA] 800mm ( 31.5) 20m/min 2,000rpm 22/18.5kW (30/25)
ROMI VTL 500R / VTL 500MR Vertical Lathes
A TRADITION OF INNOVATION ROMI VTL 500R / VTL 500MR Vertical Lathes 28/08/2013 ROMI VTL 500R Vertical Lathe CNC R RIGHT / DIREITA The definition of R (right / right) is according to the turret and the
CUTEX " Chucker Horizontal Turning Center
1 CUTEX-180 6" Chucker Horizontal Turning Center Contents Product Overview Basic Information Basic Structure Cutting Performance 04 07 Detailed Information Standard / Optional Accessories Status Hwacheon
High Frequency Spindles
High Frequency Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Table of Contents Introduction
Radial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
Description and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
GTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS
GTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
PARTS LIST (559)
STRATHMORE WHEEL TYPE DISC Before Serial No. 6629 (with 1 1/8 Square Axle) AND 3-PT. LIFT TYPE OFFSET DISC All Prices F.O.B. All Prices Subject to Change Without Notice Part No. DESCRIPTION # of Blades
Introduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8
High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
CTX Turret Series: alpha / beta / gamma
www.dmg.com DMG technologies for tomorrow CC Universal Turning Machines CTX Turret Series: alpha / beta / gamma CTX Turret Series CTX gamma 1250 / 2000 / 3000 CTX gamma 1250 / 2000 / 3000: Turn mill center
Vturn-NP16. VictorTaichung. New & Narrow Lathe with High Performance. Art of recision & erformance
R VictorTaichung Art of recision & erformance Vturn-NP6 New & Narrow Lathe with High Performance Machine width.5 meters Turning length 50 mm Rapid feeds 30/30 m/min Roller guideways Servo turret One-piece
Automatic Tool Presetter System Belt-Type Chip Conveyor Spindle Orientation Parts Catcher
Haas ST-10 GR Series CNC Lathe Gantry The High-Performance Router SystemsTurning Center [ S p e c i a l S e r i e s ] 12-station bolt-on style turret Belt-type chip conveyor available 6000-rpm high-speed
GTS SERIES. Twin Spindles & Turrets CNC Turning Centers
GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous
MICRO CUP HOLDERS
MICRO CUP HOLDERS 0 80 05 - Extremely reduced size and weight - Stainless steel stem and spring - Self-lubricating bush built in the threaded sleeve ensuring a perfect sliding of the stem and durability
Typhoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
RA-20 Paint/Solvent/Dump Valve
Instruction Sheet P/N 74B0 RA-0 Paint/Solvent/Dump Valve Description The paint/solvent valve is a normally closed valve used to trigger coating material. The valve may be used alone to actuate paint or
desired air flows are obtained, the knurled ring can be locked into position. In most instances,
ADJUSTABLE DE ABERTURA AJUSTABLE En In algunas aplicaciones, the el ingeniero be por el the volumen air. salida para some applications, engineer ha must ablevariar to vary volumel of aire outlet Brauer
BEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
SYA3000/5000/7000. How to Order SYA3000 SYA5000. Bracket One-touch fitting for ø8 G 1 4 With foot bracket. F1 One-touch fitting for ø8 SYA7000 G 1 8
Port Air Operated Valve SYA000/000/7000 How to Order Symbol M C6 01F C6 02F C10 Without bracket A/B port size Port size Series M One-touch fitting for ø4 SYA000 One-touch fitting for ø6 G 1 8 One-touch
October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
UNE ISO RNL
SERIE RNL UNE 166.002 ISO 14001 RNL 1063 Agrupadas según eje Grouped according to the shaft form RNL 1450 R.P.M..M. Altura () Head Altura () Head Caudal (Q) Capacity RNL 2900 R.P.M..M. Caudal (Q) Capacity
HURCO VDI40 TOOLING FOR HURCO
HURCO VDI40 TOOLING FOR HURCO Tae of Contents Quick Change Tooing Page 4 LinA Broach Page 5 Axia Page 6-8 Raia Page 7-9 Ajustae Ange Page 9 Static Toos Page 10-18 Accessories Page 19-21 2 Mouar esign for
Soil testing and sampling solutions.
Soil testing and sampling solutions. TEC 12 Series. Sampling drill / Perforadora TEC Soil Testing in environmental and geotechnical applications. Investigación de suelos para aplicaciones ambientales y
PREMIUM CNC PROGRAM Customized for your Needs
PREMIUM CNC PROGRAM 2018 Customized for your Needs WWW.STAHLWERK-CNC.COM Horizontal Lathes and Turning Centers ORION SERIES PAGE 10-15 Compact lathe series for batch productions Main spindle speed up
Positioning Systems Linear Motor Systems
www.hiwin.de Positioning Systems Linear Motor Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved.
VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
Datasheet LEDFLOODSTRIP PLUS. 14/03/18 Grupo MCI
Datasheet LEDFLOODSTRIP PLUS 14/03/18 Grupo MCI 230V / 24V 24V and 230V (monocolor 110 ) types 5 beam angles: 15, 34, 47, 42x25 and 110 4 Light colors: 2700K, 3000K, 4000K and 6000K, RGB and RGBW types
.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
STERILE CONTAINER SYSTEMS
BASKET MADE FROM STAINLESS STEEL WIRE MESH WIRE BASKET WITH LID TK3-1010 TK3-1011 TK3-1012 TK3-1013 540 x 250 =35 mm 540 x 250 =55 mm 540 x 250 =75 mm 540 x 250 =105 mm TK3-1020 TK3-1021 TK3-1022 TK3-1023
THE RANGE OF TORNOS MACHINING CENTERS. think parts Think Tornos. almac FB CNC 3 to 6-axis horizontal bar milling machine.
THE RANGE OF TORNOS MACHINING CENTERS think parts Think Tornos almac FB 1005 CNC 3 to 6-axis horizontal bar milling machine. Productivity and precision from 3 to 6 axes Wide range of applications In any
July 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
SPECIFICATIONS ITEM WHL-55 WHL-68 SPECIFICATIONS ITEM PROCESSING CAPACITY STROKE SPINDLE TURRET SERVO MOTOR RAPID TRAVERSES BALLSCREW OD AND THREAD TR
SPECIFICATIONS ITEM WHL-55 WHL-68 SPECIFICATIONS ITEM PROCESSING CAPACITY STROKE SPINDLE TURRET SERVO MOTOR RAPID TRAVERSES BALLSCREW OD AND THREAD TRAVERSE RATE TURNING FLUID UNIT HYDRAULIC UNIT LUBRICATION
KFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
Actuator ID10. Product Data Sheet Feature
Product Data Sheet www.moteck.com Actuator ID1 ID1 features its heavy load capability and high speed design, which is suitable for various industrial applications requiring quick movement, such as agricultural
AIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
SPARE PARTS BOOK STRIPCAT II UNIT AND OPTIONS
SPARE PARTS BOOK STRIPCAT II UNIT AND OPTIONS www.slyfrance.com - sav@slyfrance.com - tel. + 33(0)5 53 40 32 95 - fax + 33(0)5 53 40 61 36 SLY France - La Madeleine - 47210 Bournel OPENER DISC RANGE BIRM
Highest functionality, best price!
The dmg mori magazine for customers around the world Journal n 0 1 2015 37 nº 1 2015 ECOLINE turning technology: ecoturn ECOLINE milling technology: ecomill, ecomill V & MILLTAP Fast & dynamic 3D controls
NOVAMATIC PGE. High-productivity External Grinders
NOVAMATIC PGE High-productivity External Grinders GRINDING OF OUTSIDE DIAMETER AND TWO LIPS ON BEARING INNER RINGS FOR THE EARTH MOVING INDUSTRY PROFILED WHEEL FOR GRINDING OF STRAIGHT TRACKS ON BEARING
ZUMEX 100 AUTOMATIC 230 V
MODELO / MODEL ZUMEX 100 AUTOMATIC 230 V Nr. Desde/from 224915 hasta/to... Rev 00 INDICE / INDEX Vista explosionada/exploded view... Pag 2 Lista de piezas/ Part list... Pag 3 Esquema electrónico/electronic
AN AN ATTESTATORI ANGOLARI ANGULAR HEADS CUTTING UNIT THE E-MOTORS COMPETENCE LEADER.
AN 2014.01 AN ATTESTATORI ANGOLARI ANGULAR HEADS CUTTING UNIT THE E-MOTORS COMPETENCE LEADER www.saccardo.it THE E-MOTORS COMPETENCE LEADER SACCARDO2.0 THE NEVER ENDING QUALITY ERA 50 YEARS EXPERIENCE
[ means: Made in the Heart of Europe at a great price. Vertical turning machines VT 400, VT 250, VT 160 with integrated automation
[ E[M]CONOMY] means: Made in the Heart of Europe at a great price. Vertical turning machines VT 4, VT 25, VT 16 with integrated automation EMCO VERTICAL VT 4 The new VT 4 for chuck parts up to 4 mm completes
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES The Supertec GU CNC series are designed for grinding complex workpieces in small and large batch productions as well as individual parts. It is built
Actuator LA35. Data sheet LINAK.COM/TECHLINE
Actuator LA35 Data sheet LINAK.COM/TECHLINE LA35 The LA35 is a very quiet and powerful actuator, and provides a practical and cost-effective solution with low power consumption. The actuator is designed
ROLL-UP COVERS Standard products
A ROLL-UP COVERS Standard products P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages: Reliability Compact size Extremely high speeds
Serie de rodillos cruzados para rotación de precisión. Crossed roller series for precision rotation RB/RE/RU CRBC/CRBH/SX SERIES
Serie de rodillos cruzados para rotación de precisión Crossed roller series for precision rotation R/RE/RU CRC/CRH/SX SERIES R CON ARO EXTERIOR COMPUESTO - WITH COMPOSED OUTER RING R SERIE DE PRECISIÓN
CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
CX 4 Heavy Duty Precision CNC Lathe
X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock
1. GENERAL SPECIFICATIONS 2. TO ATTACH DRAW-BAR TO PUMP UNIT
Thank you for using our pallet truck. Your pallet truck is made of high quality steel and is designed for the horizontal lifting and transport of loads on a pallet or standardized containers on a level,
Feed Output Drive. 1,7-53 Nm Size 3
1,7-53 Nm Size 3 Bosch Rexroth AG Electric Drives and Controls Documentation outputs Tightening spindles Gearboxes EC motor Benefits: Integrated feed movement In connection with automatic screw supply
Electric Lifting Cylinder TV / KV 5 XE Load up to N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
COLOMBO FILIPPETTI SPA
PARALLEL OSCILLATING DRIVES CF3 COLOMBO FILIPPETTI SPA HEAVY-DUTY SERIES 165P 200P 250P 315P LA MECCANICA RAZIONALE Via Rossini, 26-24040 CASIRATE D'ADDA [BG] - ITALY - TEL.0363/3251 - TELEFAX 0363/325252
LM-P608 Portal Axis. Features. Versions
The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications
VL-VR bar. p p p. 51. Pressure bar
VL-VR In-line valves - Regulating valves 700-1000 - 00-3000 bar Pressure 700-3000 bar FEATURES These valves provide the means to control cylinders and actuators operating at pressures of 700, 1000, 00
Actuator LD3. Product Data Sheet Feature
Product Data Sheet www.moteck.com Actuator LD LD features its compact design, which is suitable for various applications that require limited installation space, such as window opener and adjustable car
TOOL HOLDERS TORNOS DECO 10.
TOOL HOLDERS. be driven. 2 Presentation be driven. PCM WILLEN SA For over 40 years, PCM Willen SA is one of the world s leading manufacturers of special tool holders for automatic lathes. All our products
U-CENTER. NC heads for facing, boring, threading and radiusing for machining centres
U-CENTER NC heads for facing, boring, threading and radiusing for machining centres 8 U-CENTER General features o + 4 1 A U-CENTER U-CENTER boring and facing heads are designed for use on machines with
HEAVY DUTY CNC TURNING CENTER SKT400/400M SKT400C/400LC/LMC
HEAVY DUTY CNC TURNING CENTER SKT400/400M SKT400C/400LC/LMC CNC Turning Center World Top Class Quality HYUNDAI-KIA Machine High Speed, High Accuracy, High Rigidity mm(in) rpm mm(in) kw(hp) 780 ( 30.7 )
GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER
GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER PARALLEL TWIN-SPINDLE CNC TURNING CENTER With leading technology and high quality components, the GTH series is particularly developed for automobile
Modelo- MQ Pag.1/17
Objeto: Fresadora de Columna Móvil MQ 12.000 Modelo: MQ CARACTERÍSTICAS BÁSICAS DE LA MÁQUINA MESA Superficie mm Ranuras en T mm Distancia entre mm ranuras Peso max. admisible Kg MQ 12.000 xxxx xxxx xxxx
Actuator LA23. Data sheet LINAK.COM/MEDLINE-CARELINE
Actuator LA23 Data sheet LINAK.COM/MEDLINE-CARELINE LA23 The LA23 actuator is a small and strong push/pull actuator (up to 2500 N). The LA23 can be used in various applications where size is important.
DM-TR. series 10 RADIAL DRIVEN TOOL SYSTEM WITH DIRECT MOTOR TURRETS (PATENTED) TECHNICAL INFORMATION I.T ISSUED 09-11
DM-TR * RADIAL DRIVEN TOOL SYSTEM WITH DIRECT MOTOR TURRETS (PATENTED) series 10 TECHNICAL INFORMATION I.T. 6468 The data given in the I.T. are subject to technical modifications without notice. GB ISSUED