Transform the existing machine into a high-speed machine!
|
|
- Octavia Adela Ferguson
- 5 years ago
- Views:
Transcription
1 ToolLine Tungaloy Report No. 428-G Transform the existing machine into a high-speed machine!
2 ACCELERATED MACHINING
3 ToolLine Productivity quadruples due to spindles that rotate at high speed with coolant pressure
4 Coolant-driven HSM spindle for high productivity with small diameter tools on limited RPM machines - SpinJet utilizes the machine tool s existing coolant supply, driven by a high pressure pump as an energy source to rotate a turbine at high speeds. - Strong coolant jet flow provide extended tool life and machining stability. No operator intervention The light-weight and compact design allows for a perfect fit into the ATC or tool magazine, ideal for un-manned, mass production lines. Energy saving Tools rotate only with coolant pressure, and the machine spindle is idle while SpinJet is in operation. Note: The main machine spindle should be stationary while the SpinJet spindle is mounted on the machine. (Use correct M-code to lock the spindle rotation). Coolant flow through machine spindle to SpinJet Shaft lock mechanism for tool replacement Precision bearing system Turbine Clamping system Cutting tool RPM wireless transmitter Coolant jet flow 4 SPINJET
5 Wireless RPM monitoring system ACCELERATED MACHINING SpinJet is equipped with an online speed display system, monitoring the actual cutting tool rotation speed during machining. (Direct wireless rotational speed monitoring in a range of up to 5 meters.) 2.4 GHz radio frequency transmission RPM monitor RPM wireless transmitter Specifications Features (Green) Coolant pressure: P (MPa) Min. flow rate: Q (l/min) No. of revolution: n (RPM) Tool dia: ødc(mm) Max. shank dia: øds (mm) ,000-55,000 Drill: Milling: These are approximate RPM values, and they depend on coolant pressure, flow rate, and type. Obsolescence of SpinJet TJS K models (the yellow, red, and blue models) TJS...K BT30/40... TJS...K DIN TJS...K CAT40... TJS...K ER32... TJS...K ST20... TJS...K HSK A63... TJS...K C5/ As of December 28, 2018, all orders for these models are not accepted. - As of December 31, 2020, all services and supports including repairs and spare part sales will end. 5
6 Applicable on a wide variety of machines SpinJet is available in several adaptation types. Types of adaptations TJSGJETBT30/40 TJSGJETER32 TJSGJETST20 TJSGJETHSKA63 TJSGJETC5/C6 Improved machining efficiency in various types of machines Suitable for turning centers, machining centers, and CNC lathes. Machine requirements - Coolant-through spindle - Coolant pressure of 2-4 MPa ( psi) - Minimum coolant filtration level of 50 µm (Use 10 µm when electro-plated grinding tools are used) Turning center Applicable on various tool magazines Machining center Lathe machine 6 SPINJET
7 ACCELERATED MACHINING Suitable for a wide range of applications - SpinJet provides highly efficient machining with various small-diameter tools up to ø3.5 mm. - Especially effective for engraving, chamfering, and fine radial grinding. Milling Grinding Thread milling Chamfering Drilling Engraving Solid endmills with long tool life and high reliability Square and ball nose types. Small-diameter threading endmills for metric and unified internal threads. Low cutting force due to short contact time of tools and workpiece materials, resulting in highprecision threading. High precision, high reliability and long tool life Micro-diameter drills that provide safe and secure operations. Drill diameter: ødc = ø0.1 - ø3.0 mm MTECS DSM 7
8 TJS-ER32 Coolant driven high speed compact spindles for ER32 collet chuck ER32 ER11SPR...AA ø81 LF LPR OAL DCONXWS BD LF LPR OAL BD DCONXWS (1) WT(kg) TJSGJETER Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min (1) Max. tool shank diameter: ø7 mm SPARE PARTS Nut Wrench for nut Shaft lock key TJSGJETER32 NUTER11GHS WRENCHER11SMS TJSSHAFTLOCKKEYGJET TJSTSDDISPLAY*** Built-in ER32 collet chuck TJSGJETER32 ER32 mounting nut ER32 collet chuck holder Options of SpinJet adaptation with ER32 BT DIN69871 CAT HSK A63 PSC Straight ER32 8 SPINJET
9 ACCELERATED MACHINING TJS-BT Coolant driven high speed compact spindles with BT shanks SS ER11SPR...AA ø81 LF LPR OAL DCONXWS BD SS LF LPR OAL BD DCONXWS (1) WT(kg) TJSGJETBT30 BT TJSGJETBT40 BT Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min (1) Max. tool shank diameter: ø7 mm SPARE PARTS Nut Wrench for nut Shaft lock key TJSGJETBT... NUTER11GHS WRENCHER11SMS TJSSHAFTLOCKKEYGJET TJSTSDDISPLAY*** TJS-HSK A63 Coolant driven high speed compact spindles with HSK A63 shanks HSKA63 ER11SPR...AA ø81 DCONMS LPR OAL DCONXWS BD DCONMS LPR OAL BD DCONXWS (1) WT(kg) TJSGJETHSKA Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min (1) Max. tool shank diameter: ø7 mm SPARE PARTS Nut Wrench for nut Shaft lock key TJSGJETHSKA63 NUTER11GHS WRENCHER11SMS TJSSHAFTLOCKKEYGJET TJSTSDDISPLAY*** 9
10 TJS-C Coolant driven high speed compact spindles with TungCap PSC ISO shanks SS ER11SPR...AA ø81 DCONMS LF LPR OAL DCONXWS BD SS DCONMS LF LPR OAL BD DCONXWS (1) WT(kg) TJSGJETC5 C TJSGJETC6 C Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min (1) Max. tool shank diameter: ø7 mm SPARE PARTS Nut Wrench for nut Shaft lock key TJSGJETHSKA63 NUTER11GHS WRENCHER11SMS TJSSHAFTLOCKKEYGJET TJSTSDDISPLAY*** TJS-ST Coolant driven high speed compact spindles with straight () shanks LS ER11SPR...AA DCONMS h6 BD ø81 LPR OAL DCONXWS DCONMS LS LPR OAL BD DCONXWS (1) WT(kg) TJSGJETST Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min (1) Max. tool shank diameter: ø7 mm SPARE PARTS Nut Wrench for nut Shaft lock key TJSGJETHSKA63 NUTER11GHS WRENCHER11SMS TJSSHAFTLOCKKEYGJET TJSTSDDISPLAY*** 10 SPINJET
11 ACCELERATED MACHINING TJS-CAT Coolant driven high speed compact spindles with CAT shanks CAT40 ER11SPR...AA ø81 OAL LF LPR DCONXWS BD LF LPR OAL BD DCONXWS (1) WT(kg) TJSGJETCAT Coolant pressure through machine spindle: Min. 2 MPa / Max. 4 MPa Min. flow rate: 12 l/min (1) Max. tool shank diameter: ø7 mm SPARE PARTS Nut Wrench for nut Shaft lock key TJSGJETHSKA63 NUTER11GHS WRENCHER11SMS TJSSHAFTLOCKKEYGJET TJSTSDDISPLAY*** 11
12 ER-SPR-AA ER 11 AA collet SS DCONWS min max HRC N SS DCONWS min DCONWS max ER11SPR0.5-1AA ER ER11SPR1-2AA ER ER11SPR2-3AA ER ER11SPR3-4AA ER ER11SPR4-5AA ER ER11SPR5-6AA ER ER11SPR6-7AA ER AA collet run-out: mm Wireless RPM speed display RPM speed display for SPINJET high speed spindles TJSTSDDISPLAYEUR TJSTSDDISPLAYUSA Including plug adaptor For Europe For the United States and Japan Machine TJS spindles TJS spindles Plug adaptor for wireless RPM speed display Type TJSTSDDISPLAYEUR TJSDISP.POWERSUPP-EUR TJSTSDDISPLAYUSA TJSDISP.POWERSUPP-USA Appearance Plug adaptor for Europe Plug adaptor for the United States and Japan Plug adaptor is also sold separately. 12 SPINJET Plug adaptor for Europe Plug adaptor for United States and Japan
13 ACCELERATED MACHINING ER-SRK Shrink collet adapter ER 11 shrink collet adapter for induction heating device ø19.9 ø33.2 INDER11TOOLADAPTER Machine TJS spindles ER-SRK Shrink collet ER 11 shrink collet for induction heating device SS LSC 4 BD2 DCONWS BD1 A A HRC N5 10 MPa LB SS DCONWS LB LSC BD2 BD1 ER11SRK3X10 ER ER11SRK3X25 ER ER11SRK4X10 ER ER11SRK4X25 ER For carbide tools only Spring collet Shrink collet Long shrink collet +10 mm +15 mm 13
14 Nut and wrench for collets C BD LB BD LB C Wrench NUTER11GHS M13X0.75 WRENCHER11SMS Shaft lock key TJSSHAFTLOCKKEYGJET 14 SPINJET
15 TEC**A2-**C*M... 2 flutes endmill for rib processing, 30º helix for materials up to 65 HRC DN 15 Hard Materials DCe8 APMX LH LF DCONMSh6 AH750 DC DCONMS DN APMX LH LF TEC004A2-006/02C4M TEC004A2-006/04C4M TEC005A2-007/02C4M TEC005A2-007/04C4M TEC005A2-007/06C4M TEC006A2-009/02C4M TEC006A2-009/04C4M TEC006A2-009/06C4M TEC007A2-010/02C4M TEC008A2-012/04C4M TEC008A2-012/06C4M TEC008A2-012/08C4M TEC009A2-0135/06C4M TEC009A2-0135/08C4M TEC009A2-0135/10C4M TEC010A2-015/04C4M TEC010A2-015/06C4M TEC010A2-015/08C4M TEC010A2-015/10C4M TEC010A2-015/12C4M TEC010A2-015/16C4M TEC012A2-018/06C4M TEC012A2-018/08C4M TEC012A2-018/10C4M TEC012A2-018/16C4M TEC014A2-021/06C4M TEC014A2-021/08C4M TEC014A2-021/10C4M TEC015A2-023/06C4M TEC015A2-023/08C4M TEC015A2-023/10C4M TEC015A2-023/12C4M TEC015A2-023/16C4M Shank Line up 15
16 TEC**A2-**C*M... 2 flutes endmill for rib processing, 30º helix for materials up to 65 HRC AH750 DC DCONMS DN APMX LH LF TEC015A2-023/18C4M TEC015A2-023/20C4M TEC016A2-024/06C4M TEC016A2-024/08C4M TEC016A2-024/10C4M TEC016A2-024/18C4M TEC016A2-024/20C4M TEC016A2-024/26C4M TEC018A2-027/06C4M TEC018A2-027/08C4M TEC018A2-027/10C4M TEC018A2-027/12C4M TEC020A2-030/06C4M TEC020A2-030/08C4M TEC020A2-030/10C4M TEC020A2-030/12C4M TEC020A2-030/16C4M TEC020A2-030/20C4M TEC020A2-030/30C4M TEC025A2-037/08C4M TEC025A2-037/10C4M TEC025A2-037/12C4M TEC025A2-037/16C4M TEC025A2-037/20C4M TEC025A2-037/30C4M TEC030A2-045/08C6M TEC030A2-045/10C6M TEC030A2-045/12C6M TEC030A2-045/16C6M TEC030A2-045/20C6M TEC030A2-045/30C6M TEC030A2-045/40C6M Shank Line up 16 SPINJET
17 TEB**A2-**C**M... 2 flutes ball nose for rib processing, 30º helix for materials up to 65 HRC DN 15 Hard Materials DCe8 APMX LH LF DCONMSh6 AH750 DC DCONMS DN APMX LH LF TEB004A2-006/02C4M TEB004A2-006/03C4M TEB005A2-007/02C4M TEB005A2-007/04C4M TEB005A2-007/06C4M TEB006A2-009/02C4M TEB006A2-009/04C4M TEB008A2-012/04C4M TEB008A2-012/06C4M TEB010A2-015/04C4M TEB010A2-015/06C4M TEB010A2-015/08C4M TEB010A2-015/10C4M TEB010A2-015/12C4M TEB010A2-015/16C4M TEB012A2-018/08C4M TEB012A2-018/12C4M TEB014A2-021/08C4M TEB014A2-021/16C4M TEB015A2-023/06C4M TEB015A2-023/08C4M TEB015A2-023/10C4M TEB015A2-023/12C4M TEB015A2-023/16C4M TEB015A2-023/20C4M TEB016A2-024/08C4M TEB016A2-024/12C4M TEB018A2-027/08C4M TEB018A2-027/12C4M TEB018A2-027/16C4M TEB020A2-030/06C4M TEB020A2-030/10C4M TEB020A2-030/12C4M TEB020A2-030/16C4M TEB020A2-030/20C4M TEB020A2-030/30C4M TEB030A2-045/08C6M TEB030A2-045/10C6M TEB030A2-045/12C6M TEB030A2-045/16C6M TEB030A2-045/20C6M TEB030A2-045/30C6M Shank Line up 17
18 DSM Micro soliddrill with std. shank size of ø3 mm, without coolant hole, dia.= ø0.1 mm - ø2 mm, L/D = DC LCF LH OAL DCONMS DC Coated DCONMS YH170 YH180 LCF LH OAL DSM0010G DSM0011G DSM0012G DSM0013G DSM0014G DSM0015G DSM0016G DSM0017G DSM0018G DSM0019G DSM0020G DSM0021G DSM0022G DSM0023G DSM0024G DSM0025G DSM0026G DSM0027G DSM0028G DSM0029G DSM0030G DSM0031G DSM0032G DSM0033G DSM0034G DSM0035G DSM0036G DSM0037G DSM0038G DSM0039G DSM0040G DSM0041G DSM0042G DSM0043G DSM0044G DSM0045G DSM0046G DSM0047G DSM0048G DSM0049G DSM0050G DSM0051G DSM0052G DC Coated DCONMS YH170 YH180 LCF LH OAL DSM0053G DSM0054G DSM0055G DSM0056G DSM0057G DSM0058G DSM0059G DSM0060G DSM0061G DSM0062G DSM0063G DSM0064G DSM0065G DSM0066G DSM0067G DSM0068G DSM0069G DSM0070G DSM0071G DSM0072G DSM0073G DSM0074G DSM0075G DSM0076G DSM0077G DSM0078G DSM0079G DSM0080G DSM0081G DSM0082G DSM0083G DSM0084G DSM0085G DSM0086G DSM0087G DSM0088G DSM0089G DSM0090G DSM0091G DSM0092G DSM0093G DSM0094G DSM0095G SPINJET
19 ACCELERATED MACHINING DC Coated DCONMS YH170 YH180 LCF LH OAL DSM0096G DSM0097G DSM0098G DSM0099G DSM0100G DSM0101G DSM0102G DSM0103G DSM0104G DSM0105G DSM0106G DSM0107G DSM0108G DSM0109G DSM0110G DSM0111G DSM0112G DSM0113G DSM0114G DSM0115G DSM0116G DSM0117G DSM0118G DSM0119G DSM0120G DSM0121G DSM0122G DSM0123G DSM0124G DSM0125G DSM0126G DSM0127G DSM0128G DSM0129G DSM0130G DSM0131G DSM0132G DSM0133G DSM0134G DSM0135G DSM0136G DSM0137G DSM0138G DSM0139G DSM0140G DSM0141G DSM0142G DSM0143G DSM0144G DSM0145G DSM0146G DSM0147G DSM0148G DSM0149G DSM0150G DSM0151G DSM0152G DSM0153G DSM0154G DSM0155G DSM0156G DC Coated DCONMS YH170 YH180 LCF LH OAL DSM0157G DSM0158G DSM0159G DSM0160G DSM0161G DSM0162G DSM0163G DSM0164G DSM0165G DSM0166G DSM0167G DSM0168G DSM0169G DSM0170G DSM0171G DSM0172G DSM0173G DSM0174G DSM0175G DSM0176G DSM0177G DSM0178G DSM0179G DSM0180G DSM0181G DSM0182G DSM0183G DSM0184G DSM0185G DSM0186G DSM0187G DSM0188G DSM0189G DSM0190G DSM0191G DSM0192G DSM0193G DSM0194G DSM0195G DSM0196G DSM0197G DSM0198G DSM0199G DSM0200G Note: Use a pilot hole before drilling ø0.3 mm hole or smaller Line up 19
20 DSM-CP Centering drill for DSM SIG 0 DC OAL DCONMS DC YH170 DCONMS OAL SIG DSM-CP DSM-CP Line up 20 SPINJET
21 MTECS-ISO Small Diameter Solid Carbide Threading Endmills for Internal ISO metric Profile Without coolant hole TP DCONMS Thread size DC LH LF Pitch Application range DCONMS DC Number of flutes LH LF Grade MTECS03007C20.25ISO 0.25 M AH725 MTECS03009C30.25ISO 0.25 M AH725 MTECS03011C40.3ISO 0.3 M AH725 MTECS03012C50.35ISO 0.35 M AH725 MTECS03016C60.4ISO 0.4 M AH725 MTECS06016C40.4ISO 0.4 M AH725 MTECS03017C70.45ISO 0.45 M AH725 MTECS06017C50.45ISO 0.45 M AH725 MTECS0602C50.45ISO 0.45 M AH725 MTECS0602C70.45ISO 0.45 M AH725 MTECS06024C60.5ISO 0.5 M AH725 MTECS06024C90.5ISO 0.5 M AH725 MTECS06024C90.5ISOL 0.5 M AH725 MTECS03024C120.5ISO 0.5 M AH725 MTECS03024C150.5ISO 0.5 M AH725 MTECS06054D200.5ISO 0.5 M AH725 MTECS06028C100.6ISO 0.6 M AH725 MTECS06028C70.6ISO 0.6 M AH725 MTECS06031C120.7ISO 0.7 M AH725 MTECS06031C120.7ISOL 0.7 M AH725 MTECS06031C160.7ISO 0.7 M AH725 MTECS06031C90.7ISO 0.7 M AH725 MTECS0808D250.75ISO 0.75 M AH725 MTECS06038C120.8ISO 0.8 M AH725 MTECS06038C160.8ISO 0.8 M AH725 MTECS06038C160.8ISOL 0.8 M AH725 MTECS06047C141.0ISO 1 M AH725 MTECS06047C201.0ISO 1 M AH725 MTECS06047C201.0ISOL 1 M AH725 MTECS0606C181.25ISO 1.25 M AH725 MTECS0606C241.25ISO 1.25 M AH
22 MTECSH-ISO Small Diameter Short Left-Hand Cutting Solid Carbide Internal ISO metric Profile Threading Endmills for Hardened Steel Without coolant hole TP DCONMS LF LH DC Pitch Application range DCONMS DC Number of flutes LH LF Grade MTECSH03012C50.35ISO 0.35 M AH750 MTECSH03016C60.4ISO 0.4 M AH750 MTECSH06016C40.4ISO 0.4 M AH750 MTECSH06017C50.45ISO 0.45 M AH750 MTECSH0602C50.45ISO 0.45 M AH750 MTECSH0602C70.45ISO 0.45 M AH750 MTECSH06024C60.5ISO 0.5 M AH750 MTECSH06024C90.5ISO 0.5 M AH750 MTECSH06028C70.6ISO 0.6 M AH750 MTECSH06031C120.7ISO 0.7 M AH750 MTECSH06038C120.8ISO 0.8 M AH750 MTECSH06047C141.0ISO 1 M AH750 MTECSH06047C201.0ISO 1 M AH750 MTECSH0606C181.25ISO 1.25 M AH750 MTECSH0606C241.25ISO 1.25 M AH SPINJET
23 ACCELERATED MACHINING MTECS-UN Small Diameter Solid Carbide UN Profile Threading Endmills for Steel Without coolant hole DC TP DCONMS LH LF TPI Application range Number of DCONMS DC UNC UNF flutes LH LF Grade MTECS03012C880UN 80 - # AH725 MTECS03015C672UN 72 - # AH725 MTECS06016C656UN 56 #2 # AH725 MTECS06016C456UN 56 #2 # AH725 MTECS06019C548UN 48 #3 # AH725 MTECS03021C1240UN 40 # AH725 MTECS06021C840UN 40 # AH725 MTECS06024C940UN 40 #5 # AH725 MTECS06021C640UN 40 # AH725 MTECS06033C936UN 36 - # AH725 MTECS06025C732UN 32 # AH725 MTECS06025C1032UN 32 # AH725 MTECS06032C932UN 32 #8 # AH725 MTECS06032C1232UN 32 #8 # AH725 MTECS06037C1032UN 32 - # AH725 MTECS06037C1532UN 32 - # AH725 MTECS0605C1428UN 28-1/ AH725 MTECS0605C1928UN 28-1/ AH725 MTECS06047C1420UN 20 1/ AH725 MTECS06047C1920UN 20 1/ AH725 MTECS06047C1920UN-L 20 1/ AH725 MTECS0606C1718UN 18 5/ AH725 MTECS0606C2318UN 18 5/ AH
24 MTECSH-UN Small Diameter Short Left-Hand Cutting Solid Carbide UN Profile Threading Endmills for Hardened Steel Without coolant hole TP DCONMS LF LH DC TPI Application range Number of DCONMS DC UNC UNF flutes LH LF Grade MTECSH06012C480UN 80 - # AH725 MTECSH06016C656UN 56 #2 # AH725 MTECSH06019C548UN 48 #3 # AH725 MTECSH06021C640UN 40 # AH725 MTECSH06024C740UN 40 #5 # AH725 MTECSH06021C840UN 40 # AH725 MTECSH06024C940UN 40 #5 # AH725 MTECSH06025C1032UN 32 # AH725 MTECSH06032C932UN 32 # AH725 MTECSH06037C1032UN 32 - # AH725 MTECSH06037C1532UN 32 - # AH725 MTECSH06042C1128UN 28 - # AH725 MTECSH0605C1428UN 28-1/ AH725 MTECSH06035C1024UN 24 #10-# AH725 MTECSH06047C1920UN 20 1/ AH725 MTECSH0606C1718UN 18 5/ AH725 MTECSH0606C2318UN 18 5/ AH SPINJET
25 ACCELERATED MACHINING PRACTICAL EXAMPLES Workpiece type Holder Endmill Grade Machine parts Electrode TJSGJETST20 TJSGJETST20 TEB010A2-015/12C4M45 (ø1.0, z = 2) TEB010A2-015/12C4M45 (ø1.0, z = 2) AH750 AH750 SUS303 / X10CrNiS18-9 (25HRC) C1100 Cutting conditions Workpiece material Cutting speed: Vc (m/min) No. of revolutions: n (RPM) Feed per tooth: fz (mm/t) Depth of cut: ap (mm) Width of cut: ae (mm) Process Coolant Machine Results Workpiece type Holder Endmill Grade Machined parts (piece /hour) ø40 mm 20 mm ,600 40, Grooving Wet Vertical M/C, BT30 Productivity: 5.8! Machine spindle Productivity increased by 5.8 times due to high-speed rotation of 45,600 RPM. Tool life is also tripled. Machined parts (piece /hour) Medical equipment Plastic mold TJSGJETER32 TJSGJETST20 TEB010A2-015/12C4M45 (ø1.0, z = 2) TEB010A2-015/04C4M45 (ø1.0, z = 2) AH750 AH750 Titanium alloys V2 (60HRC) mm 30 mm Profiling Wet Vertical M/C, BT30 6 mm Productivity: 3! Machine spindle Productivity increased by 3 times due to high-speed rotation of 40,000 RPM. Workpiece material 0.05 mm 50 mm ø80 mm Cutting conditions Cutting speed: Vc (m/min) No. of revolutions: n (RPM) Feed per tooth: fz (mm/t) Depth of cut: ap (mm) Width of cut: ae (mm) Process Coolant Machine Results Machined parts (piece /hour) ,000 39, Profiling Wet Vertical M/C, BT30 Productivity: 3.5! Machine spindle Productivity increased by 3.5 times due to high-speed rotation of 35,000 RPM. Tool life is also extended by 4 times. Machined parts (piece /hour) Profiling Wet Vertical M/C, BT30 Productivity: 3.2! Machine spindle Productivity increased by 3.2 times due to high-speed rotation of 39,000 RPM. 25
26 CHECK SHEET Customer name Please be sure to fill in the thick-bordered boxes (required items). Check item Answer Note Maker / Model Max. revolution Type of main spindle chucking For BT50, please check if it has a programming pre-read function. Machine Coolant through Possible Not possible Coolant Coolant pressure (MPa) Coolant filter mesh ( m) Need to be 2-4 MPa Need to be 100 m (Recommendation : 50 m) With grinding wheel : 10 m Work material Work material Application Tool Current cutting condition Application Tool diameter (mm) Shank diameter (mm) Cutting speed Vc (m/min) Number of revolutions n (min -1 ) Feed f (mm/rev) Feed per tooth fz (mm/t) Feed speed Vf (mm/min) Depth of cut ap (mm) Width of cut ae (mm) Ex. Endmilling, drilling, etc. Endmill : ø3.5 Drill : ø2 Need step drilling Need to be ø6 Remarks Desired cutting condition, request, etc.
27 MEMO
28 Tungaloy Corporation (Head office) 11-1 Yoshima-Kogyodanchi Iwaki-city, Fukushima, Japan Phone: Fax: Tungaloy America, Inc N Ventura Drive Arlington Heights,IL 60004, U.S.A. Phone: Fax: Tungaloy Canada 432 Elgin St. Unit 3 Brantford, Ontario N3S 7P7, Canada Phone: Fax: Tungaloy de Mexico S.A. C Los Arellano 113, Parque Industrial Siglo XXI Aguascalientes, AGS, Mexico Phone: Fax: Tungaloy do Brasil Ltda. Avd. Independencia N4158 Residencial Flora Vinhedo, São Paulo, Brasil Phone: Fax: Tungaloy Germany GmbH An der Alten Ziegelei 1 D Monheim, Germany Phone: Fax: Tungaloy France S.A.S. ZA Courtaboeuf - Le Rio 1 rue de la Terre de feu F Courtaboeuf Cedex, France Phone: Fax: Tungaloy Italia S.r.I. Via E. Andolfato 10 I Milano, Italy Phone: Fax: Tungaloy Czech s.r.o. Turanka 115 CZ Brno, Czech Republic Phone: Fax: Tungaloy Ibérica S.L. C/Miquel Servet, 43B, Nau 7 Pol. Ind. Bufalvent ES Manresa (BCN), Spain Phone: Fax: Tungaloy Scandinavia AB Bultgatan Kungälv, Sweden Phone: Tungaloy Rus, LLC , Moscow, Andropov Avenue, 18, building 7, 11th floor (office 3). Metro station Technopark. Business center «I-Land». Phone: Tungaloy Polska Sp. z o.o. ul. Genewska Warszawa, Poland Phone: Fax: Tungaloy U.K. Ltd The Technology Centre, Wolverhampton Science Park Glaisher Drive, Wolverhampton West Midlands WV10 9RU, UK Phone: Fax: salesinfo@tungaloyuk.co.uk Tungaloy Hungary Kft Erzsébet királyné útja 125 H-1142 Budapest, Hungary Phone: Fax: info@tungaloytools.hu Tungaloy Turkey Dudullu OSB 4. Cad No: Ümraniye Istanbul, TURKEY Phone: Fax: info@tungaloy.com.tr Tungaloy Benelux b.v. Tjalk 70 NL-2411 NZ Bodegraven, Netherlands Phone: Fax: Tungaloy Croatia Ulica bana Josipa Jelačića 87, Samobor Phone: Fax: Tungaloy Cutting Tool (Shanghai) Co.,Ltd. Rm No 401 No.88 Zhabei Jiangchang No.3 Rd Shanghai , China Phone: Fax: Tungaloy Cutting Tool (Thailand) Co.,Ltd. Interlink tower 4th Fl. 1858/5-7 Bangna-Trad Road km.5 Bangna, Bangna, Bangkok Thailand Phone: Fax: Tungaloy Singapore (Pte.), Ltd. 62 Ubi Road 1, #06-11 Oxley BizHub 2 Singapore Phone: Fax: Tungaloy Vietnam LE 04-38, Lexington Residence 67 Mai Chi Tho, Dist. 2, Ho Chi Minh City, Vietnam Phone: Fax: Tungaloy India Pvt. Ltd. Indiabulls Finance Centre, Unit # 902-A, 9th Floor, Tower 1, Senapati Bapat Marg, Elphinstone Road (West), Mumbai , India Phone: Fax: Tungaloy Korea Co., Ltd #1312, Byucksan Digital Valley 5-cha Beotkkot-ro 244, Geumcheon-gu Seoul, Korea Phone: Fax: Tungaloy Malaysia Sdn Bhd 50 K-2, Kelana Mall, Jalan SS6/14 Kelana Jaya, Petaling Jaya, Selangor Darul Ehsan Malaysia Phone: Fax: Tungaloy Australia Pty Ltd PO Box 2232, 68/1470 Ferntree Gully Road, Knoxfield Victoria 3180, Australia Phone: Fax: PT. Tungaloy Indonesia Kompleks Grand Wisata Block AA-10 No.3-5 Cibitung Bekasi 17510, Indonesia Phone: Fax: follow us at: facebook.com/tungaloyjapan twitter.com/tungaloyjapan To see this product in action visit: Distributed by: DOWNLOAD Dr. Carbide App Produced from Recycled paper AS9100 Certified ISO14001 Certified EC97J Dec (TJ)
Effectively reduces machining time!
GrooveLine Tungaloy Report No. 427-G TUNGHEAVYGROOVE Effectively reduces machining time! ACCELERATED MACHINING GrooveLine Unique system for wide grooving and wide profile grooving Efficiently reduces machining
More informationFull effective head-exchangeable drill for efficient holemaking
DrillLine www.tungaloy.com Tungaloy Report No. 412-G DRILLMEISTER Full effective head-exchangeable drill for efficient holemaking ACCELERATED MACHINING DrillLine Reduces tool change time Decreased machining
More informationTurnLine. Tungaloy Report No. 427-E. Effectively reduces. machining time!
TurnLine Tungaloy Report No. 427-E w w w. t u n g a l o y. c o m Effectively reduces machining time! www.tungaloy.com TurnLine Unique system for wide grooving and wide profi le grooving Efficiently reduces
More informationMillLine TUNGALOY TUNGALOY. Tungaloy Report No. 385-G. Economical face milling cutter for various applications
MillLine TUNGALOY TUNGALOY Tungaloy Report No. 385-G w w w. t u n g a l o y. c o m Economical face milling cutter for various applications www.tungaloy.com MillLine TUNGALOY TUNGALOY 4 types of inserts
More informationNEW. type. Lower cutting force, less chattering & excellent chip control! Chipbreaker inserts for steel and stainless steel machining
Keeping the Cusmer First Tungaloy Report No. 37-E Chipbreaker inserts for steel and stainless steel machining type NEW TUNGALOY Lower force, less chattering & excellent chip control! TUNGALOY & Features
More informationDrillLine. Tungaloy Report 401-E. Adjustable tool reduces the number of drills required
DrillLine Tungaloy Report 401-E w w w. t u n g a l o y. c o m Adjustable tool reduces the number of drills required A large diameter drill providing a more complete offering with the versatility of TDX
More informationThe most economical solution for drilling!
Line www.tungaloy.com Tungaloy Report No. 409-G TUNGSIX-DRILL The most economical solution for drilling! ACCELERATED MACHINING Line First double sided 6 cornered insert for drilling with superior performance.
More informationDurable and economical tool for grooving and parting-off
GrooveLine Tungaloy Report No. 416-G Durable and economical tool for grooving and parting-off ACCELERATED MACHINING GrooveLine TetraMini-Cut TetraForce-Cut brings innovation to grooving. Ground insert
More informationInnovative high-feed cutters offer incredible productivity!
MillLine Tungaloy Report No. 403-G Innovative high-feed cutters offer incredible productivity! ACCELERATED MACHINING MillLine High-feed cutters reduce machining time for a wide range of plications. Innovative
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationMagnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
More informationMagnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
More informationMPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More informationQuick change polygon tool clamping system!
Tungaloy Report No. 410-US Total tooling system New ine of Extension and Reduction Adapters Quick change polygon tool clamping system! Features High rigidity The TungCap clamping mechanism is extremely
More informationToolLine. Tungaloy Report No. 410-E. Quick change system with polygon coupling tooling
Tooline Tungaloy eport No. 410-E w w w. t u n g a l o y. c o m Quick change system with polygon coupling tooling www.tungaloy.com Tooline Accelerated operation on CNC lathes and multi-task machines! High
More informationMain material GFRPP IWAKI MAGNETIC DRIVE PUMPS
Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationYou ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
More informationEnergy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More informationVFX for High Efficiency Milling of Titanium Alloys
TOOL NEW 2017.5 Update B182A For Milling VFX eries Insert Expansion VFX for High Efficiency Milling of s Outstanding metal removal rates up to 24 inch 3 /min (with ø2.5" cutter) Unparalleled Chip Ejection
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationWDO-SUS. Coolant-through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D
WDO-SUS -through WDO carbide drill series for stainless steel WDO-SUS-3D WDO-SUS-5D HIGHLY EFFICIENT TOOLS DESIGNED TO EXCEL IN DIFFICULT MACHINING ENVIRON MENT Finally, the answer you've been looking
More informationMax. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic
More information-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
More informationESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
More informationB368E MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING
MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING 2017.11 B368E MS DRILL SOLID CARBIDE DRILL SERIES A new choice of quality tooling for a superior cost peformance ratio. A versatile combination of reliable
More informationCompany profile for wheels production HEELS PRODUCTION MADE IN ITALY
Company profile for wheels production HEELS PRODUCTION w w w. i m t i n t e r m a t o. i t 3 1983 Production of vertical turning lathes for the machining of allumium light alloy wheels begins. 1987 Introduction
More informationSolid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationWL SPARE PARTS. conveyor systems
WL SPARE PARTS conveyor systems Spare parts Conveyor system WL 2 FlexLink Spare parts catalogue Spare parts Conveyor system WL Copyright FlexLink 2012 The contents of this publication are the copyright
More informationA + Endmill. Endmill Series for Aluminum Machining. Optimized Solutions for Each Application Type. Higher Machining Efficiency
Endmill Series for Machining Endmills for rough, medium to finish cutting of aluminum Optimized Solutions for Each Application Type A wide selection of tools provided for various machining processes Higher
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationQuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment
More informationSuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationVCF 850 series. Multi-purpose machining center VCF 850 VCF 850SR VCF 850L VCF 850LSR
VCF 85 series Multi-purpose machining center VCF 85 series VCF 85 VCF 85SR VCF 85L VCF 85LSR VCF 85 series Multi purpose moving column vertical machining center, providing a 3m long machining area and
More informationPREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationPARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationMDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
More informationMobile Filtration Systems SMFS-P and SMFS-U
SMFS-P-015 SMFS-U-030 SMFS-U-DL-015-G SMFS-U-060 SMFS-U-110 SMFS-U-CM-110 Mobile Filtration Systems SMFS-P and SMFS-U Introduction 2 Introduction STAUFF Filtration Technology offers a complete range of
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationnanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes The perfect combination: ER collet chuck and modular
More informationB182E VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOYS
VFX VFX FOR HIGH EFFICIENCY ROUGH MACHINING OF TITANIUM ALLOY 2018.04 B182E VFX5/6 ERIE UNPARALLELED CHIP EJECTION PROPERTIE HELP RE-DEFINE THE PARAMETER FOR MACHINING TITANIUM ALLOY HIGH RIGIDITY DEIGN
More informationSMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE
SMX-F series Self-priming magnetic drive pumps Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation Self-priming magnetic drive pumps Main material CFRETFE The SMX-F
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationSolid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationMP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING
ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING 2017.09 MP200E ARM MULTI-FUNCTIONAL HIGH FEED CUTTER FOR MOULD & DIE MACHINING ARM is a new multifunctional high-performance cutter that
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More informationNew PVD grade for general purpose is added in multi-functional series
TurnLine www.tungaloy.com Tungaloy Report No. 391-E TUNGCUT New PVD grade for general purpose is added in multi-functional series ACCELERATED MACHINING TurnLine Multi-functional tool system for diverse
More informationRoll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
More informationLand Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2
TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has
More informationIdentification System. Unground Rods. Semi - Finished Ground Rods. Coolant Hole Rods. Ground Rods (h6)
006 Update s 4 Identification System 5 Unground Rods Length mm Length 00mm for End Mills 6 Semi - Finished Ground Rods For End Mills 0 Coolant Hole Rods Straight Coolant Hole Sprial Coolant Hole Gun Drill
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More informationKnife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
More informationStrippit V/VX-Series CNC TURRET PUNCH PRESSES ENERGY SYSTEM REDUCTION
Strippit V/VX-Series CNC TURRET PUNCH PRESSES ENERGY REDUCTION SYSTEM STRIPPIT V/VX-SERIES Unsurpassed Productivity When production applications demand high productivity, the Strippit V/VX-Series delivers.
More informationPROMOTIONS. SP ECIAL OFFERS ON Additional discounts available Receive 1 cutter for free Special prices available Special prices available
PROMOTIONS valid until 30.06.2016 Turning & Milling Inserts High Feed Milling Shoulder & Face Milling Solid Carbide End Mills Drilling Threading SP ECIAL OFFERS ON Additional discounts available Receive
More informationIwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationMTC. Mold Temperature Control. Consilience Technology
We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationExcellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering
Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationSingle-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
More informationHigh Accuracy Wire Electrical Discharge Machines
Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat
More informationPlants. ColdMix Mobile/Semi-mobile and stationary plants. With productive capacity of t/h
Plants ColdMix Mobile/Semi-mobile and stationary plants With productive capacity of 130 400 t/h Cold Mix 130 400 t/h Flexible, pure and simple : The continuous cold mixing plant Both mobile and stationary
More informationCrazyDrill TM Cool. The Mikron Tool drilling concept
CrazyDrill TM Cool The Mikron Tool drilling concept 2 Usable length x d 25 coated Item number uncoated d (k5) l (± 0.1) D (h) L D Powerchamber L effective length l Shank with Coolant Powerchamber for small
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationHELICOPTERS Service. Helicopter Maintenance Upgrades
HELICOPTERS Service Helicopter Maintenance Upgrades MISSION SUCCESS WITH AIRBUS HELICOPTERS UPGRADES Airbus Helicopters Customer Centers are at your service: providing local, on-the-spot solutions Airbus
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
More informationRM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money
Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even
More informationMETALLIC CENTRIFUGAL MAGNETIC DRIVE PUMPS MP M MMP MTFO
METALLIC CENTRIFUGAL MAGNETIC DRIVE PUS M M MTFO Small / Medium Sized Standard Centrifugal Pumps» Compact, metallic centrifugal magnetic drive pumps» Excellent heat and pressure resistance» Cover a wide
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationCrazyDrill TM Cool XL
CrazyDrill TM Cool XL NEW Extra long High Performance Drills 2 1 shot = 1 hole CrazyDrill Cool XL for deep hole drilling With the new CrazyDrill Cool XL, the engineers from Mikron Tool have developed a
More informationDrilling Depth ( L / D) Content
Micro Long Drill General Features Micro Long Drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole
More informationTHE RANGE OF TORNOS MACHINING CENTERS. think parts Think Tornos. almac FB CNC 3 to 6-axis horizontal bar milling machine.
THE RANGE OF TORNOS MACHINING CENTERS think parts Think Tornos almac FB 1005 CNC 3 to 6-axis horizontal bar milling machine. Productivity and precision from 3 to 6 axes Wide range of applications In any
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationLocal Solutions For Individual Customers Worldwide. Cutting Ring Assembly and 37 Tube Flaring Machine STAUFF Press SPR-PRC-MA.
Local Solutions For Individual Customers Worldwide Cutting Ring Assembly and 37 Tube Flaring Machine STAUFF Press SPR-PRC-MA Product Catalogue STAUFF Connect Combined Cutting Ring Assembly and 37 Tube
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More information