WL SPARE PARTS. conveyor systems
|
|
|
- Victor Bryan
- 5 years ago
- Views:
Transcription
1 WL SPARE PARTS conveyor systems
2 Spare parts Conveyor system WL 2 FlexLink Spare parts catalogue
3 Spare parts Conveyor system WL Copyright FlexLink 2012 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information but no liability can be accepted for any errors or omissions. The right is reserved to make design modifications. Patents Essential parts of the FlexLink product range are protected by patents and design regulations. Drawings are made to European standards. Content End drive units, direct drive, no slip clutch... 2 End drive units direct drive with slip clutch... 4 Idler end units... 7 Spare parts Slide rails - WL... 9 Spare parts Chains - WL Product designations in alphanumeric order FlexLink Spare parts catalogue 3
4 Spare parts Conveyor system WL Catalogue instructions 1. How to read the catalogue: Open the catalogue and from the Table of content or the PDF navigation bar locate the group in which the part you want to find is present. Turn over to the concerned page number by a "click". Now find out the figure of the part you wish to order. Jot down the part number against that particular figure number from the text. In case, if you have the part number and you need the other details, the part index can be used. The part index (at the end of the catalogue) will give you the figure and page number of the part you wish to order. 2. How to order spare parts: The part number and the description of the part required should be invariably mentioned in the order as per the catalog text. The latest part number as conveyed through our service circulars should only appear on the order. In case of ordering colored components, color code of the components should be mentioned. The quantity shown against the part number is the quantity per unit for that group so that particular quantity should be multiplied by the number of sets required. 3. Abbreviations: The following abbreviations are used in this catalog: 4. Recomended Spare parts: Several items of the complete spare parts overview are earmarked as recommended spare parts. FlexLink advises its customers to purchase and stock these specific items for replacement in case of failure of the original item. The recommended spares are limited to only these items for which the cost of buying is in a fair relationship to the risk (i.e. probability * impact) of sudden failure. It merely consists of wear parts and some electrical and pneumatic components. assly. V N.I. W Comp. Fr Std. L A/t. Rr L.H. R.H. AR (Part number) Part number presented in parantheses and in Italic character style *) Recomended Spare part Assembly Volts Not illustrated Watt Complete Front Standard Length Alternate Rear Left hand Right hand As required Parts are included in a Spare parts kit. These items can only be purchased as part of a kit and when an item has an * the corresponding item always is placed between brackets (..) see above. Parts which are usually kept in stock and have short turnaround (See item 4) 4 FlexLink Spare parts catalogue
5 Spare parts End drive unit - WL Technical information from FlexLink 5672EN-1 End drive units, direct drive, no slip clutch WLEB Revision list Document designation Date Type of revision Entered by 5672EN Initial version CB 2 1 Item Description Part No Qty Comments Recommended Spare parts 1 Motor, see Drive unit guide unit WLEB 0A322N_P WLEB 0A424N_P WLEB 0A626N_P 1 Spare parts 5672EN-1 1
6 Spare parts 0-unit WLEB 0A322N_P, WLEB 0A424N_P, WLEB 0A626N_P Spare parts
7 Spare parts End drive units, direct drive, no slip clutch Item Description Part No Qty Comments Recommended Spare parts 1 Torque arm kit Side plate L Guide L Retaining ring DIN St 2 5 Bearing housing Bearing 2205E- 2RS1TN9/C 2 7 Retaining ring DIN St 1 8 Drive wheel For WLEB 0A322N_P X Drive wheel For WLEB 0A424N_P X Drive wheel For WLEB 0A626N_P X 9 Retaining ring Drive shaft For WLEB 0A322N_P Drive shaft For WLEB 0A424N_P Drive shaft For WLEB 0A626N_P 11 Guide R Side plate R Cover plate Support profile WLCN Lx Cleat XWCP Beam For WLEB 0A322N_P Beam For WLEB 0A424N_P Beam For WLEB 0A626N_P 17 Connecting strip Spare parts 3
8 Spare parts End drive units, direct drive with slip clutch WLEB Item Description Part No Qty Comments Recommended Spare parts 1 Motor, see Drive unit guide Adapter plate Incl. bolts, washers and shaft 3 0-Unit WLEB 0A322_P WLEB 0A424_P WLEB 0A626_P 1 The illustration shows part no Spare parts
9 Spare parts 0-unit WLEB 0A322_P, WLEB 0A424_P, WLEB 0A626_P Spare parts 5
10 Spare parts End drive units, direct drive with slip clutch Item Description Part No Qty Comments Recommended Spare parts 1 Slip clutch 25 mm Flange Thin parallel key 8 7x25 1 DIN 6885A h9 4 Side plate L Guide L Retaining ring DIN St 2 7 Bearing housing Bearing 2205E- 2RS1TN9/C 2 9 Retaining ring DIN St 1 10 Drive wheel For WLEB 0A322_P Drive wheel For WLEB 0A424_P Drive wheel For WLEB 0A626_P 11 Retaining ring Drive shaft For WLEB 0A322_P Drive shaft For WLEB 0A424_P Drive shaft For WLEB 0A626_P 13 Guide R Side plate Cover plate Support profile WLCN Lx Cleat XWCP Beam For WLEB 0A322_P Beam For WLEB 0A424_P Beam For WLEB 0A626_P 19 Connecting strip Spare parts
11 Spare parts Idler end unit - WL Technical information from FlexLink Idler end units WLEJ 300A322, WLEJ 300A424, WLEJ 300A626 Revision list 5673EN-1 Document designation Date Type of revision Entered by 5673EN Initial version CB Item Description Part No Qty Comments Recommended Spare parts 1 Cover plate Side plate Guide L Bearing housing Retaining ring DIN St 2 6 Roller For WLEJ 300A322 Roller For WLEJ 300A424 Roller For WLEJ 300A626 7 Retaining ring DIN St 6 8 Shaft For WLEJ 300A322 Shaft For WLEJ 300A424 Shaft For WLEJ 300A626 9 Retaining ring DIN St 1 10 Guide R Side plate Support profile WLCN Lx Cleat XWCP Beam For WLEJ 300A322 Beam For WLEJ 300A424 Beam For WLEJ 300A Connecting strip Spare parts 5673EN-1 7
12 Spare parts 8 Spare parts
13 Spare parts Slide rails - WL Technical information from FlexLink Spare parts Slide rails - WL Revision list 5674EN-1 Document designation Date Type of revision Entered by 5674EN Initial version CB ,5 2,5 5 Item Description Part No Qty Comments Recommended Spare parts 1 Slide rail, PA-PE (Grey) XBCR 25 H X 2 Slide rail, PA-PE (Grey) XBCR 25 HB X 3 Support rail, PA-PE (Grey) WLCS 25x5 H X Spare parts 5674EN-1 9
14 Spare parts 10 Spare parts
15 Spare parts Chains - WL Technical information from FlexLink Spare parts Chains - WL Revision list 5675EN-1 Document designation Date Type of revision Entered by 5675EN Initial version CB 1 2 Item Description Part No Qty Comments Recommended Spare parts (Based on previous chain in the Conveyor system) 1 Plain belt, Acetal Length 1 m X 304 mm wide, WL 322 WLTP 1A304 H 406 mm wide, WL 424 WLTP 1A406 H 608 mm wide, WL 626 WLTP 1A608 H 2 Friction top belt, Polypropylene Length 1 m X 304 mm wide, WL 322 WLTP 1A304 F 406 mm wide, WL 424 WLTP 1A406 F 608 mm wide, WL 626t WLTP 1A608 F Spare parts 5675EN-1 11
16 Spare parts 12 Spare parts
17 Spare parts Product designations in alphanumeric order Part number Page x WLCN Lx20 3 WLCN Lx20 6 WLCN Lx20 7 WLCS 25x5 H 9 Spare parts 13
18 For the latest technical documents visit to download product catalogues, manuals and instructions. Register for a MyFlexLink account and get 24/7 access to CAD drawings, engineering tools and order online. Australia Pty Ltd Mount Waverley VIC info.au@flexlink.com France SAS Elancourt cedex + 33-(0) info.fr@flexlink.com Malaysia FlexLink Automation Sdn Bhd Shah Alam info.my@flexlink.com Thailand Pte Ltd Bangkok info.th@flexlink.com Belgium N.V. Leuven +32-(0) info.be@flexlink.com Germany GmbH Offenbach info.de@flexlink.com The Netherlands B.V. Hoofddorp +31-(0) info.nl@flexlink.com United Kingdom Ltd Milton Keynes +44-(0) info.uk@flexlink.com Brazil Ltda Barueri SP info.br@flexlink.com Canada Canada, Inc. Burlington, ON info.ca@flexlink.com Hungary Kft. Budapest info.hu@flexlink.com India India Pvt. Ltd. Gurgaon info.in@flexlink.com Poland Polska Sp. z o.o. Sady info.pl@flexlink.com Russia LLC St. Petersburg +7-(812) info.ru@flexlink.com USA Main office, Inc. Allentown, PA +1 (610) info.us@flexlink.com South, Inc. Greenville, SC +1 (864) China FlexLink Automation Shanghai +86-(0) info.cn@flexlink.com Indonesia PT Jakarta info.id@flexlink.com Singapore Pte Ltd Singapore info.sg@flexlink.com West, Inc. Plano, TX +1 (972) Czech Republic Praha info.cz@flexlink.com Italy S.p.A. Cascine Vica info.it@flexlink.com Spain España, S.L. Barcelona info.es@flexlink.com Finland Helsinki info.fi@flexlink.com Your business partner: Japan K.K. Tokyo +81-(0) info.jp@flexlink.com Sweden AB Göteborg +46-(0) info.se@flexlink.com 5676EN-1 Copyright 2012 FlexLink
conveyor and pallet handling systems
x45 SPARE parts conveyor and pallet handling systems ii Conveyor system X45 Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even
conveyor and pallet handling systems
xb SPARE parts conveyor and pallet handling systems Conveyor system XB Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts)
xs spare parts conveyor and pallet handling systems
xs spare parts conveyor and pallet handling systems Conveyor system XS Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts)
conveyor and pallet handling systems
xh SPARE parts conveyor and pallet handling systems Conveyor system XH Content Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even
Spare parts Conveyor system XB
Conveyor system XB Conveyor system XB FlexLink catalogue 1 Conveyor system XB 2 FlexLink catalogue Conveyor system XB Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers
SYSTEM X45. Spare parts
SYSTEM X45 Conveyor system X45 FlexLink catalogue i Conveyor system X45 Copyright FlexLink 20 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts)
Spare parts Conveyor system XS
Conveyor system XS 15 http://www.flexlink.com 16 Content Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission
conveyor and pallet handling systems
xk SPARE parts conveyor and pallet handling systems Conveyor system XK Content Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even
Spare parts End drive unit-xh... 1
Copyright FlexLink 2011 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure
FlexLink enclosure system
FlexLink enclosure system F I R S T C H O I C E F O R E A S I E R AUTOMATION Don t spend your resources We have already done this for Keep your production safe with the FlexLink standard enclosure system.
replacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
ESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Modular plastic belt conveyor WL
Modular plastic belt conveyor WL Contents System information...389 Conveyor sections...390 Belts introduction...391 Belts...392 Accessories for use with Friction top belt...392 Conveyor frame components
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
Spare parts Conveyor system X65
Conveyor system X65 Spare parts Conveyor system X65 FlexLink Spare parts catalogue i Conveyor system X65 ii FlexLink Spare parts catalogue Conveyor system X65 Content Copyright FlexLink 2013 The contents
EMS215ic, EMP215ic, EM215ic
EMS215ic, EMP215ic, EM215ic Spare parts list 0463 412 001 GB 20170126 Valid for: serial no. 552, 615-xxx-xxxx Ordering number Product Notes 0558 102 239 EMS 215ic Bobbin Ø4-8" (100-200 mm). CSA/Bayonet
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
Roll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
HOW TO SEND E-INVOICES TO CARGOTEC
HOW TO SEND E-INVOICES TO CARGOTEC Basware Corporation Copyright Basware Corporation All rights reserved SUPPLIER KIT 2 (11) Contents 1 Cargotec urges to only use 3 2 Cargotec companies currently receiving
Installation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
HELICOPTERS Service. Helicopter Maintenance Upgrades
HELICOPTERS Service Helicopter Maintenance Upgrades MISSION SUCCESS WITH AIRBUS HELICOPTERS UPGRADES Airbus Helicopters Customer Centers are at your service: providing local, on-the-spot solutions Airbus
PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
Single-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
Advant OCS Open Control System
Advant OCS Open Control System Computer Aided Electrical Engineering makes you a more productive electrical engineer 1 Boost your efficiency with the Electrical Diagram Builder The Electrical Diagram Builder
AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications
Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com
Bearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
Total credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
Spherical Roller Bearings
Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.
Global Economic Briefing: Merchandise Trade
Global Economic Briefing: Merchandise Trade June 27, 18 Dr. Edward Yardeni 516-972-7683 eyardeni@ Debbie Johnson 48-664-1333 djohnson@ Mali Quintana 48-664-1333 aquintana@ Please visit our sites at www.
Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5
Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
Centering Unit. Alignment and positioning of transferred workpieces. MACM Series. Table. Max. allowable load weight: 2205 lbs (1000 kg) (MACM10)
Centering Unit Alignment and positioning of transferred workpieces Contributes to space saving on conveyor lines Heavy workpieces can now be aligned and positioned with small cylinders, resulting in compact
Infographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
ASEAN International Merchandise Trade Statistics Yearbook 2014
International Merchandise Trade Statistics Yearbook 2014 The Secretariat Jakarta The Association of Southeast Asian Nations () was established on 8 August 1967. The Member States of the Association are
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
UXC.COM A PUBLICATION OF. NPO Overview 1501 MACY DRIVE ROSWELL, GA PH FX
2019 A PUBLICATION OF UXC.COM NPO Overview 1501 MACY DRIVE ROSWELL, GA 30076 PH +1 770 642-7745 FX +1 770 643-2954 NOTICE UxC, LLC ( UxC ) shall have title to, ownership of, and all proprietary rights
Spare parts Conveyor system X85
Conveyor system X85 Conveyor system X85 FlexLink catalogue i Conveyor system X85 Drawings are made to European standards. Content Ó Copyright FlexLink 0 The contents of this publication are the copyright
The new STx chain hoist NEW. Sophisticated technology prepared for the future
The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing
Main material GFRPP IWAKI MAGNETIC DRIVE PUMPS
Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical
A04 Worm gear reducers and gearmotors
Products Media No. 4005 A04 Worm gear reducers and gearmotors North America Issue Edition October 2011 . A04 Edition October 2011 North America Issue 5 6 A04 Edition October 2011 North America Issue
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 13
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-06-03 issue 13 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic
Miggytrac B501. Instruction manual GB Valid for: serial no xxxx
Miggytrac B501 Instruction manual 0463 404 001 GB 20150116 Valid for: serial no. 1501 xxxx TABLE OF CONTENTS 1 SAFETY... 4 2 INTRODUCTION... 6 3 TECHNICAL DATA... 7 4 INSTALLATION... 8 4.1 Assembly...
David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter
David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiters positive action eliminates the inaccuracies of shearing
Automation components
Automation components Framework, enclosure and linear components FlexLink worldwide Australia FlexLink Systems P.O. Box 301 Oakleigh, Victoria 3166 Telephone +61-(0)3-9563 4514 Fax +61-(0)3-9563 0897 Benelux
MWA /MWB Roundline Cylinders
MWA /MWB For working pressures up to and bar Catalogue HY7-/UK June Catalogue HY7-/UK Introduction Standard MW Cylinders Parker's MW range of cylinders is designed for medium and heavy duty industrial
The SHK manual chain hoist
07. 2014 The SHK manual chain hoist The SHK and SHK+ manual chain hoist The SHK manual chain hoist features a wide spectrum of applications, independent of a power supply. The robust, compact construction
300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
Thick Film Chip Resistors
Thick Film Chip Resistors Features: Small size and light weight. Suitable for both flow and reflow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications:
Our Most Important Connection is with You. NSX ARINC 600. Power and Performance NSX ARINC 600
Our Most Important Connection is with You. NSX ARINC 600 Power and Performance NSX ARINC 600 NSX (ARINC 600) Radiall s NSX Arinc 600 series has been used for more than 30 years to connect high performance
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >
OIML Weights. OIML Weights from METTLER TOLEDO E1-M3 1 mg-2000 kg. The Right Choice for Quality in Laboratory and Industrial Environments
OIML Weights OIML Weights from METTLER TOLEDO E1-M3 1 mg-2000 kg The Right Choice for Quality in Laboratory and Industrial Environments OIML Weights OIML Weights We value top quality in every respect just
CrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
TSUBAKIMOTO CHAIN CO.
TSUBAKIMOTO CHAIN CO. United States of America U.S. TSUBAKI POWER TRANSMISSION, LLC +1 847-459-9500 http://ustsubaki.com/ Brazil TSUBAKI BRASIL EQUIPAMENTOS INDUSTRIAIS LTDA. +55 11-3253-5656 http://tsubaki.ind.br/
Professional reconditioning of Machine Tool spindles
Professional reconditioning of Machine Tool spindles SKF Spindle Service Applications Any kind of spindle Machining Centres As world leader of rolling bearings, SKF is operating more than Milling 5000
Heavy Industry EP new planetary gear units H new helical and bevel-helical gear units
Industries Heavy Industry EP new planetary gear units H new helical and bevel-helical gear units Edition April 2016 H series CUSTOMIZED SOLUTIONS ON REQUEST Size * 400 401 450 451 500 501 560 561 630 631
Product Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
Deuter - Land of Enchantment. It is possible for paper to meet protection against harmful interference in a residential.
Deuter - Land of Enchantment. It is possible for paper to meet protection against harmful interference in a residential. Deuter - Land of Enchantment >>>DOWNLOAD LINK
Lifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
Spare Parts List Series VP04 Pneumatic Remote Control Valve
Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024
SKF SEAL JET. NG 025 / NG 040 / NG 060 machines
SKF SEAL JET NG 025 / NG 040 / NG 060 machines The SKF SEAL JET system The SKF SEAL JET technology for machining seals on demand is based on proprietary software and customized tools developed by SKF.
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
Global Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
Gear Pumps/Motors Series PGP/PGM 500
Gear Pumps/Motors Series PGP/PGM 500 Express Delivery Program Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product
150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
Rectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
Multi Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
CAM CLUTCH BS-F SERIES
NEW TSUBAKI CAM CLUTCH BS-F SERIES One-way clutch BACKSTOP Cam Clutch Developing new tec TSUBAKI abundant B Ideal for tough environment Special labyrinth seal mechanism for dusty environment Flexible labyrinth
The SHK manual chain hoist
0.206 The SHK manual chain hoist The SHK and SHK+ manual chain hoist The SHK manual chain hoist features a wide spectrum of applications, independent of a power supply. The robust, compact construction
Strippit V/VX-Series CNC TURRET PUNCH PRESSES ENERGY SYSTEM REDUCTION
Strippit V/VX-Series CNC TURRET PUNCH PRESSES ENERGY REDUCTION SYSTEM STRIPPIT V/VX-SERIES Unsurpassed Productivity When production applications demand high productivity, the Strippit V/VX-Series delivers.
BOLL Automatic Filter TYPE The Compact Design Two-Chamber Filter. BOLL & KIRCH Filterbau GmbH
BOLL Automatic Filter TYPE 6.72 The Compact Design Two-Chamber Filter BOLL & KIRCH Filterbau GmbH THE TASK Perfect pre-treatment In order to ensure that large combustion engines or mechanical processing
Platform Systems. applications
Rail Systems Platform Systems applications Heavy Metro Systems Light Rail Systems Automated Metros APMs - Airport Link/City Shopping New and Retrofit Installations Underground, Over-ground and Elevated
Configurable Components
Configurable Components Contents Building a FlexLink system...31 Modular conveyors introduction...33 Modular conveyors...34 Modular conveyors Configuration strings...35 X45 horizontal conveyor Configuration
Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
Type 242 Pneumatically Actuated Butterfly Valve
Type 242 Pneumatically Actuated Butterfly Valve Standard Features Size 2"-8" Body Ductile Iron poxy powder coated ANSI 15 bold pattern Wetted Materials PVC, CPVC, PROGEF Standard Polypropylene, SYGEF PVDF
-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
Knife gate valve WB11
Knife gate valve WB11 Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-12-28 issue 13 Knife gate valve WB11 Stafsjö's knife gate valve WB11 is bi-directional
European Aerosol Production 2016
European Aerosol Production 216 EUROPEAN AEROSOL FEDERATION Boulevard du Souverain 165 116 Brussels - Belgium Phone: + 32.2.679.62.8 Fax: + 32.2.679.62.83 info@aerosol.org - www.aerosol.org FEA 216 All
BP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28