FERROXCUBE DATA SHEET. RM6R RM, RM/I, RM/ILP cores and accessories. Supersedes data of September Sep 01

Transcription

1 FERROXCUBE DATA SHEET RM, RM/I, RM/ILP cores and accessories Supersedes data of September Sep 1

2 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).81 mm 1 V e effective volume 81 mm 3 I e effective length 25.6 mm A e effective area 32. mm 2 A min minimum area 23.8 mm 2 m mass of set 4.5 g handbook, halfpage M ± ± CBW128 Fig.1 core set. Core sets for filter applications Clamping force for A L measurements, 4 ±2 N. GRADE A L (nh) µ e TOTAL AIR GAP (µm) TYPE (WITH NUT) TYPE (WITHOUT NUT) 3D3 4 ±3% D3-E4/N -3D3-E4 63 ±3% D3-E63/N -3D3-E63 1 ±3% D3-E1/N -3D3-E1 16 ±3% D3-A16/N -3D3-A16 1 ±25% 65-3D3 3H3 16 ±3% H3-A16/N -3H3-A16 25 ±3% H3-A25/N -3H3-A ±3% H3-A315/N -3H3-A315 4 ±3% H3-A4/N -3H3-A4 22 ±25% 142-3H3 28 Sep 1 122

3 INDUCTANCE ADJUSTER General data handbook, halfpage O PARAMETER SPECIFICATION Material of head and thread Maximum operating temperature polypropylene (PP), glass fibre reinforced 125 C M min MGC79 Fig.2 inductance adjuster. Inductance adjuster selection chart (applies to all types) GRADE A L (nh) TYPES FOR LOW ADJUSTMENT Note 1. Maximum adjustment range. L/L (1) % TYPES FOR MEDIUM ADJUSTMENT L/L (1) % TYPES FOR HIGH ADJUSTMENT 3H3 4 ADJ-RM6-GREEN 2 63 ADJ-RM6-GREEN 14 ADJ-RM6-RED 22 1 ADJ-RM6-GREEN 1 ADJ-RM6-RED ADJ-RM6-GREEN 6 ADJ-RM6-RED 1 ADJ-RM6-WHITE 19 2 ADJ-RM6-RED 8 ADJ-RM6-WHITE 15 ADJ-RM6-VIOLET ADJ-RM6-WHITE 12 ADJ-RM6-VIOLET 14 ADJ-RM6-BROWN ADJ-RM6-WHITE 9 ADJ-RM6-BROWN 15 ADJ-RM6-BLACK 22 4 ADJ-RM6-VIOLET 8 ADJ-RM6-BLACK 16 ADJ-RM6-GREY 3 63 ADJ-RM6-BLACK 9 ADJ-RM6-GREY 15 1 ADJ-RM6-BLACK 5 ADJ-RM6-GREY ADJ-RM6-GREY 5 3D3 4 ADJ-RM6-GREEN 2 63 ADJ-RM6-GREEN 14 ADJ-RM6-RED 23 1 ADJ-RM6-GREEN 9 ADJ-RM6-RED 16 ADJ-RM6-WHITE ADJ-RM6-RED 1 ADJ-RM6-WHITE 17 L/L (1) % 28 Sep 1 123

4 COIL FORMERS General data PARAMETER SPECIFICATION Coil former material phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with UL 94V- ; UL file number E167521(M) Pin material copper-tin alloy (CuSn), tin (Sn) plated Maximum operating temperature 18 C, IEC 685, class H Resistance to soldering heat IEC , Part 2, Test Tb, method 1B, 35 C, 3.5 s Solderability IEC , Part 2, Test Ta, method 1 handbook, full pagewidth (6.4 min).4.75 O O O max 1.4 min MGC8 Fig.3 coil former; 4-pins. Winding data and area product for 4-pins coil former SECTIONS PINS PIN POSITIONS USED AVERAGE LENGTH TURN (mm 2 ) WIDTH PRODUCT Ae x Aw (mm 4 ) TYPE 1 4 all CSV-RM6S/R-1S-4P 2 4 all x 224 CSV-RM6S/R-2S-4P 28 Sep 1 124

5 handbook, full pagewidth (6.4 min) min.4.75 O O max MGC81 Fig.4 coil former; 6-pins. Winding data and area product for 6-pins coil former SECTIONS PINS PIN POSITIONS USED AVERAGE LENGTH TURN (mm 2 ) WIDTH PRODUCT Ae x Aw (mm 4 ) TYPE 1 6 all CSV--1S-6P 2 6 all x 224 CSV--2S-6P MOUNTING PARTS General data handbook, halfpage ITEM SPECIFICATION Clamping force 2 N Clip material steel Clip plating silver (Ag) Solderability IEC , Part 2, Test Ta, method 1 Type number CLI/P-RM MGC82 Fig.5 Mounting clip for. 28 Sep 1 125

6 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification PRODUCT STATUS Development DEFINITIONS This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype Design-in Preferred Support These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 28 Sep 1 126