FERROXCUBE DATA SHEET. E19/8/5 E cores and accessories. Supersedes data of September Sep 01

Transcription

1 FERROXCUBE DATA SHEET Supersedes data of September Sep 01

2 CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1) 1.77 mm 1 V e effective volume 900 mm 3 I e effective length 39.9 mm A e effective area 22.6 mm 2 A min minimum area 22.1 mm 2 m mass of core half 2.3 g handbook, halfpage 19.1 ± ± CBW011 Dimensions in mm. Fig.1 core half. Core halves A L measured in combination with a non-gapped core half, clamping force for A L measurements, 20 ±10 N. GRADE A L (nh) µ e AIR GAP (µm) 3C81 63 ±5% C81-A ±8% C81-A ±8% C81-A ±15% C81-A ±15% C81-A ±25% C81 3C90 63 ±5% C90-A ±8% C90-A ±8% C90-A ±15% C90-A ±15% C90-A ±25% C90 3C ±25% C91 3C ±25% C92 3C ±25% C94 3C ±25% C Sep

3 GRADE 3F3 63 ±5% F3-A ±8% F3-A ±8% F3-A ±15% F3-A ±15% F3-A ±25% F3 3F ±25% F35 Core halves of high permeability grades Clamping force for A L measurements, 20 ±10 N. GRADE A L (nh) A L (nh) µ e AIR GAP (µm) µ e AIR GAP (µm) 3E ±25% E27 Properties of core sets under power conditions B (mt) at Properties of core sets under power conditions (continued) Note 1. Measured at 60 C. CORE LOSS (W) at GRADE H = 250 A/m; f=25khz; f = 100 khz; f = 100 khz; f = 400 khz; f = 25 khz; Bˆ = 200 mt; Bˆ =100mT; Bˆ = 200 mt; Bˆ =50mT; T = 100 C T=100 C T = 100 C T = 100 C T = 100 C 3C C C (1) 0.37 (1) 3C C C F F B (mt) at CORE LOSS (W) at GRADE H=250A/m; f=500khz; f = 500 khz; f=1mhz; f=3mhz; f = 25 khz; Bˆ =50mT; Bˆ =100mT; Bˆ =30mT; Bˆ =10mT; T = 100 C T=100 C T = 100 C T = 100 C T=100 C 3C F F Sep

4 COIL FORMERS General data for coil former without pins PARAMETER Coil former material Maximum operating temperature SPECIFICATION polyamide (PA6.6), glass reinforced, flame retardant in accordance with UL 94V-2 ; UL file number E41938(M) 130 C, IEC 60085, class B handbook, full pagewidth CBW012 Dimensions in mm. Fig.2 coil former. Winding data and area product for coil forme without pins NUMBER OF SECTIONS MINIMUM WINDING (mm 2 ) NOMINAL WINDING WIDTH AVERAGE LENGTH OF TURN PRODUCT Ae x Aw (mm 4 ) CP--1S 2008 Sep

5 General data for 8-pins coil former PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION polyamide (PA6.6), glass reinforced, flame retardant in accordance with UL 94V-0; UL file number E41938(M) copper-zinc alloy (CuZn), tin (Sn) plated 130 C, IEC 60085, class B IEC , Part 2, Test Tb, method 1B, 350 C, 3.5 s IEC , Part 2, Test Ta, method 1, 235 C, 2 s handbook, full pagewidth min (1) 5.1 CBW max. (1) one place only ± 0.38 Dimensions in mm. Fig.3 coil former; 8-pins. Winding data and area product for 8-pins coil former NUMBER OF SECTIONS MINIMUM WNDING (mm 2 ) NOMINAL WINDING WIDTH AVERAGE LENGTH OF TURN PRODUCT Ae x Aw (mm 4 ) CPH--1S-8PD-Z 2008 Sep

6 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification PRODUCT STATUS Development DEFINITIONS This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype Design-in Preferred Support These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability Sep