OUTDOOR LIGHTING

Transcription

1 Sheet 1 of 1 TLE OF CONTENTS GENERL INFORMTION HID LMPS PHOTOCONTROLS LUMINIRE COMPONENTS NEM HED LUMINIRE COMPONENTS HORIZONTL LUMINIRE COMPONENTS LED RCKET MOUNT LUMINIRES LUMINIRE COMPONENTS HID DECORTIVE (POST TOP) LUMINIRE COMPONENTS LED DECORTIVE (POST TOP) LUMINIRES LUMINIRE COMPONENTS HID DIRECTIONL (FLOOD) LUMINIRE COMPONENTS LED DIRECTIONL (FLOOD) LUMINIRES MULTIPLE INSTLLTION ON WOOD POLE MULTIPLE INSTLLTION ON WOOD LINE POLE OVE COMMUNICTIONS MULTIPLE INSTLLTION, ORNMENTL CONCRETE POLE, OVERHED CIRCUIT, DEDEND MULTIPLE INSTLLTION, ORNMENTL CONCRETE POLE, OVERHED CIRCUIT, TNGENT, NGLE MULTIPLE INSTLLTION, ORNMENTL CONCRETE POLE, UG CIRCUIT FIERGLSS POLE, 30 ND 35, UG CIRCUIT FIERGLSS POLE, 30 ND 35, OH CIRCUIT, TNGENT, NGLE OR DE DIRECTIONL FLOOD ON WOOD POLE MULTIPLE CLE TERMINTION RISER FOR DIRECT URIED CIRCUIT POST TOP INSTLLTION ON FIERGLSS POLE STREET LIGHTING POLE/CONDUIT STREET LIGHTING, SPLICE OX INSTLLTION OF UG STREET LIGHT CLE ON WOOD POLE MULTIPLE INSTLLTION, 30 REKWY POLE, UG CIRCUIT OUTDOOR LIGHT TGGING MO ONLY MO ONLY ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** REV. DTE: 12/26/2017

2 General Information Sheet 1 of General General information concerning outdoor lighting installations is covered in this section. 2.0 Standard Luminaires 2.1 racket Mount (rea) Luminaires ll new installations will be made using Light Emitting Diode (LED) equivalent bracket mount luminaires. The existing High Pressure Sodium (HPS), Pulse-start Metal Halide (PMH), probe-start Metal Halide (MH) and Mercury Vapor (MV) luminaires are no longer available, and may remain in-service until the Luminaire, Lamp or Photocontrol failure. 2.1 Directional (Flood) Luminaires ll new installations will be made using LED equivalent directional (flood) luminaires. The existing HPS, PMH, MH and MV luminaires are no longer available, and may remain in-service until the Luminaire, Lamp or Photocontrol failure. 2.2 Decorative (Post-Top) Luminaires In Missouri all new lighting installations will be made using LED luminaires. The existing HPS, PMH, MH and MV luminaires are no longer available, and may remain in-service until the Luminaire failure. Illinois all new lighting installations will be made using HPS and PMH luminaires. The existing MH and MV luminaires are no longer available, and may remain in-service until the Luminaire failure. The list of available Luminaires: STOCK NUMER STYLE STTE LMP WTTS LED 100 W EQUIVLENT RCKET MOUNT LUMINIRE IES LIGHT PTTERN racket Mount MO LED 39 II, FIG racket Mount MO LED 39 V, FIG racket Mount IL LED 39 II, FIG racket Mount IL LED 39 V, FIG. 3 LED 250 W EQUIVLENT RCKET MOUNT LUMINIRE racket Mount MO LED 137 III, FIG. 2 VOLTS 120V/208V/ 240V/277V 120V/208V/ 240V/277V 120V/208V/ 240V/277V 120V/208V/ 240V/277V 120V/208V/ 240V/277V CORRL. COLOR TEMP. (3) (KELVIN) LUMENS STRT/ OP MPS VOLTGE INPUT RNGE PF % , ±5% 99% , ±5% 99% , ±5% 99% , ±5% 99% , ±5% 99% racket Mount MO LED 137 III, FIG V , ±5% 99% racket Mount IL LED 107 III, FIG V/208V/ 240V/277V , ±5% 99% racket Mount IL LED 107 III, FIG V , ±5% 99% LED 400 W EQUIVLENT RCKET MOUNT LUMINIRE racket Mount MO LED 195 III, FIG. 2 TLE 1. VILLE LUMINIRES 120V/208V/ 240V/277V , ±5% 100% racket Mount MO LED 195 III, FIG V , ±5% 100% ENG: WW REV: 11 REV. DTE: 09/01/2017

3 General Information Sheet 2 of 10 STOCK NUMER STYLE STTE LMP WTTS IES LIGHT PTTERN racket Mount IL LED 190 III, FIG. 2 VOLTS 120V/208V/ 240V/277V CORRL. COLOR TEMP. (3) (KELVIN) LUMENS STRT/ OP MPS VOLTGE INPUT RNGE PF % , ±5% 100% racket Mount IL LED 190 III, FIG V , ±5% 100% LED 250W EQUIVLENT DIRECTIONL/FLOOD LUMINIRE Directional MO LED 98 6X6 120/208/ 240/277V , ±10% 90% Directional MO LED 98 6X V , ±10% 90% Directional IL LED 98 6X6 120/208/ 240/277V , ±10% 90% Directional IL LED 98 6X V , ±10% 90% LED 400W EQUIVLENT DIRECTIONL/FLOOD LUMINIRE Directional MO LED 150 6X6 120/208/ 240/277V , ±10% 90% Directional MO LED 150 6X V , ±10% 90% Directional IL LED 150 6X6 120/208/ 240/277V , ±10% 90% Directional IL LED 150 6X V , ±10% 90% LED 1000W EQUIVLENT DIRECTIONL/FLOOD LUMINIRE Directional MO LED 297 6X Rectangular IL LED 44 III, FIG Rectangular IL LED 136 III, FIG. 2 LED 400W EQUIVLENT RECTNGULR (SHOEOX) LUMINIRE Rectangular IL LED 183 III, FIG /208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V , ±10% 90% , ±10% 90% , ±10% 90% , ±10% 90% Rectangular IL LED 183 III, FIG V , ±10% 90% HID DECORTIVE/POST-TOP LUMINIRE TLE 1. VILLE LUMINIRES (CONTINUED) LED 100W EQUIVLENT RECTNGULR (SHOEOX) LUMINIRE LED 250W EQUIVLENT RECTNGULR (SHOEOX) LUMINIRE Early merican IL / MO HPS 100 III, FIG V 1,900K 9, /2.1 ±5% 45% Early merican IL / MO HPS 100 V, FIG V 1,900K 9, /2.1 ±5% 45% (1,2) Early merican IL MH 175 III, FIG V 4,100K 14, /1.75 ±10% 45% (2) Early merican IL PMH 150 III, FIG V 4,100K 12,900 - ±10% 45% corn IL HPS 100 V, FIG V 1,900K 9, /2.1 ±5% 45% (1,2) corn IL MH 175 V, FIG V 4,100K 14, /1.75 ±10% 45% (2) corn IL PMH 150 V, FIG V 4,100K 12, /0.9 ±10% 45% ENG: WW REV: 11 REV. DTE: 09/01/2017

4 General Information Sheet 3 of 10 STOCK NUMER STYLE STTE LMP WTTS IES LIGHT PTTERN VOLTS CORRL. COLOR TEMP. (3) (KELVIN) LUMENS STRT/ OP MPS VOLTGE INPUT RNGE Colonial MO HPS 100 III, FIG V 1,900K 9, /2.1 ±5% 45% Colonial MO HPS 100 V, FIG V 1,900K 9, /2.1 ±5% 45% Contemporary or Traditional Contemporary or Traditional TLE 1. VILLE LUMINIRES (CONTINUED) MO HPS 100 III, FIG V 1,900K 9, /2.1 ±5% 45% MO HPS 100 V, FIG V 1,900K 9, /2.1 ±5% 45% spen MO HPS 100 III, FIG V 1,900K 9, /2.1 ±5% 45% spen MO HPS 100 V, FIG V 1,900K 9, /2.1 ±5% 45% PF % LED 100W EQUIVLENT DECORTIVE/POST-TOP LUMINIRE Early merican MO LED 52 III, FIG Early merican MO LED 52 V, FIG Colonial MO LED 44 III, FIG Colonial MO LED 44 V, FIG Contemporary or Traditional Contemporary or Traditional MO LED 50 III, FIG. 2 MO LED 50 V, FIG spen MO LED 39 III, FIG spen MO LED 39 V, FIG /208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V 120/208/ 240/277V , ±10% 88% , ±10% 88% , ±10% 88% , ±10% 88% , ±10% 94% , ±10% 94% , ±10% 96% , ±10% 96% NOTES: 1. Probe-start Metal Halide (MH) luminaires with solid red identification tag are obsolete. These luminaires require MH lamp and may remain in service until Luminaire failure. 2. Pulse-start Metal halide (PMH) Lamps are NOT interchangeable with probe-start Metal Halide (MH) Lamps. If a PMH lamp is installed in the MH luminaire, the lamp will not ignite or will not start. If a MH lamp is installed in the PMH luminaire, the lamp will ignite or start very quickly. The MH lamp is not designed to run on the PMH ballast and will experience a very short lamp life. ecause of the high startup voltage that is delivered across the ballast by the ignitor to the lamp, the lamp is subject to a non-passive end of life and could rupture the lamp arch tube. It is very important to always close the luminaire optical before testing the lamp or starting the MH/PMH luminaire. 3. Correlated Color Temperature (CCT) is the measure of light source color appearance in degrees Kelvin. ENG: WW REV: 11 REV. DTE: 09/01/2017

5 General Information Sheet 4 of Lighting Patterns SIDEWLK STREET OR LLEY SIDEWLK FIGURE 1 Type II - The type II distribution is used for lighting alleys and smaller streets. The light beam is narrow and long. LED 100W EQUIVLENT RCKET MOUNT TYPE II LUMINIRE SIDEWLK STREET SIDEWLK FIGURE 2 Type III - The type III distribution is used for lighting the larger roadways, general parking areas and other areas where a larger area of lighting is required. LED 250W & 400W EQUIVLENT RCKET MOUNT TYPE III LUMINIRE LUMINIRE (TYP.) FIGURE 3 Type V - The type V distribution is used for lighting intersections, center islands of parkway, cul-de-sacs, and fields. The light beam has even intensity at all angles. LED 100W EQUIVLENT RCKET MOUNT TYPE V LUMINIRE ENG: WW REV: 11 REV. DTE: 09/01/2017

6 General Information Sheet 5 of Identification ll luminaires are shipped with the appropriate NEM identification decal. If the decal is not installed it should be re-applied on the fixture so that it can be seen from the ground. NEM DECL 3" MIN. 3" MIN. 101/4" 2" MIN " MIN. 10 TYPE V LED 3" MIN V LED 3/4" MIN V LED TLE 2. IDENTIFYING CODE IDENTIFYING NUMERL LMP WTTGE ND LED EQUIVLENT CKGROUND COLOR LMP TYPE W GOLD HIGH PRESSURE SODIUM (HPS) W *HLF RED/HLF WHITE PULSE-STRT METL HLIDE (PMH) W LUE MERCURY VPOR (MV) W RED PROE-STRT METL HLIDE (MH) W GOLD HIGH PRESSURE SODIUM (HPS) X W RED PROE-STRT METL HLIDE (MH) W EQV. WHITE LIGHT EMITTING DIODE (LED) 10 TYPE V 100 W EQV. WHITE LIGHT EMITTING DIODE (LED) W EQV. WHITE LIGHT EMITTING DIODE (LED) V 250 W EQV. WHITE LIGHT EMITTING DIODE (LED) W EQV. WHITE LIGHT EMITTING DIODE (LED) V 400 W EQV. WHITE LIGHT EMITTING DIODE (LED) X W EQV. WHITE LIGHT EMITTING DIODE (LED) ENG: WW REV: 11 REV. DTE: 09/01/2017

7 General Information Sheet 6 of 10 PROE STRT METL HLIDE MH *HORIZONTL URN PULSE STRT METL HLIDE PMH *VERTICL URN PULSE STRT METL HLIDE PMH * PMH Luminaires label with wattage identification code. The first label on the left is horizontal burn PMH luminaire such as horizontal non-cutoff, horizontal cutoff, and directional flood luminaires. The label on the right is for vertical burn PMH luminaire such as post-top luminaires. 5.0 Luminaire Mounting Heights Post-top luminaires shall be mounted only on fiberglass poles purchased specifically for that purpose. ll other types of luminaires shall be mounted in accordance with the following table. The preferred height should be maintained whenever possible but the minimum heights may be used if this avoids a pole replacement. Mounting height is defined as the height from ground to the bottom of the refractor (glassware) on glass enclosed reflectors and to the bottom of the lamp on open type reflectors. LIGHT EMITTING DIODE (LED) LED 100 W EQUIVLENT RCKET MOUNT LED 250 W EQUIV. DIRECT. LED 400 W EQUIV. DIRECT. LED 250 W EQUIVLENT RCKET MOUNT LED 250 W EQUIVLENT RCKET MOUNT LED 400 W EQUIVLENT RCKET MOUNT LED 400 W EQUIVLENT RCKET MOUNT LED 1000 W EQUIV. DIRECT. 6.0 rackets HIGH PRESSURE SODIUM (HPS) W HPS POST-TOP TLE 3. LUMINIRE MOUNTING HEIGHTS PROE-STRT (MH) ND PULSE-STRT (PMH) METL HLIDE 150 W PMH POST-TOP 175 W MH POST-TOP 100 W HPS OPEN OTTOM 100 W HPS HORIZ. COR HED W HPS DIRECTIONL 250 W MH & PMH DIRECTIONL 400 W HPS DIRECTIONL 400 W MH & PMH DIRECTIONL W MH & PMH HORIZONTL COR HED 250 W HPS HORIZONTL COR HED 400 W HPS HORIZONTL COR HED W MH & PMH HORIZONTL COR HED W MH DIRECTIONL MIN. MTG. HEIGHT [FT.] PREF. MTG. HEIGHT [FT.] Standard installations for area lights shall use the 30 bracket. Standard installations for street lights shall use the 6 bracket. rackets must be ordered as a separate item along with the luminaire and all other components and hard-ware. For special applications, other brackets are available but their usage should be limited as much as possible. The following data is for use in determining bracket locations to provide luminaire mounting heights as specified in the proceeding section. ll upsweep brackets and mast arms are equipped for 1-1/4 slip-fitter mounting of luminaires ENG: WW REV: 11 REV. DTE: 09/01/2017

8 General Information Sheet 7 of 10 C C C L UPPER MEMER 30" ND 6' RCKETS DRWING NOT TO SCLE 15' MST RM DRWING NOT TO SCLE 24" TWO 5/8" DI. THRUOLT C L LOWER MEMER TLE 4. RCKET ND MST RM LENGTH/DIMENSIONS RCKET LENGTH C 30 11" Ornamental concrete pole are no longer meren s standards and they are replaced with fiberglass poles for maintenance. Ornamental concrete pole have a set bracket mounting point. For these concrete poles the height above ground level at the luminaire end of the bracket is per following table: TLE 5. LUMINIRE HEIGHT OVE GROUND LEVEL - CONCRETE POLES CONCRETE POLES STOCK NUMER POLE HIGHT OVE THE GROUNG LUMINIRE HEIGHT T THE END OF THE 6 FT. RCKETS EXISTING - MINTENNCE ONLY 23' 25'-3" EXISTING - MINTENNCE ONLY 28' 30'-3" 6.2 For both horizontal and vertical burning luminaires, the distance from the mounting point to the bottom of the luminaire is approximately 12. For fiberglass mast arm poles per material spec , the height above ground level, at the luminaire end of the bracket is per following table: TLE 6. LUMINIRE HEIGHT OVE GROUND LEVEL - FIERGLSS POLES FIERGLSS POLES STOCK NUMER POLE HIGHT OVE THE GROUNG LUMINIRE HEIGHT T THE END OF THE 6 FT. RCKETS ' 26'-3" ' 28'-3" ' 31'-3" ' 33'-3" ENG: WW REV: 11 REV. DTE: 09/01/2017

9 General Information Sheet 8 of Remote Operated and Multiple Light Control Periodically, light from one luminaire will activate the photocell and shut off another light. For these circumstances, when simply re-aiming the photocell does not resolve the problem, a remote photocell mounting bracket is used. In some circumstances, it is beneficial to operate multiple luminaires from one control. For these circumstances a remote photocell mounting bracket or relay is used. In both of the above situations, the photocell on the luminaire is replaced with a shorting plug. The photocell is rated at 15 while the relay is rated at 30. See Table 1 of this document, for current draw information in order to determine how many luminaires can be controlled by either the photocell or the relay. If multiple luminaires are used on 3-wire, single phase circuits, care should be taken to balance the load between the two phases in order to have the lights operated at the same time. POLE LCK-120V SUPPLY NEUTRL POLE LCK RED-SWITCHED LEG WHITE WHITE RED MULTIPLE LIGHT CONTROL DIGRM * STOCK NUMER STTE MO/IL DESCRIPTION PHOTOCELL, V, 1000 W FIL ON, LCK, NORTH ORIENTED, HEVY DUTY (LONG LIFE, 20+ YERS) MO/IL PLUG, SHORTING, PHOTOELECTRIC CELL MO/IL TLE 7. MULTIPLE LIGHT CONTROL MTERIL PHOTOCELL RCKET ND PHOTOCELL RECEPTCLE SSEMLY MOUNTING ON POLE OR CROSSRM W/RECEPTCLE MO/IL RELY, 120 V, 30 MULTIPLE STREETLIGHTS *For more information on photocontrol see DCS ENG: WW REV: 11 REV. DTE: 09/01/2017

10 General Information Sheet 9 of References Chart Missouri STOCK NUMER LED LUMINIRE TLE 8. LUMINRE EQUIVLENT WTTGES - RCKET MOUNT LUMINIRES - MISSOURI LUMINIRE I.D. LIGHT EMITTING DIODE (LED) MERCURY VPOR (MV) HID FIXTURE WTTGE METL HLIDE (MH) PULSE-STRT (PMH) HIGH PRESS. SODIUM (HPS) VOLTGE MO W 100/150/175/250 W 150 W & 175 W 70 W & 100 W 120/208/240/277 V MO 10 TYPE V 39 W 100/150/175/250 W 150 W & 175 W 70 W & 100 W 120/208/240/277 V MO W 400 W 250 W 250 W 120/208/240/277 V MO V 140 W 400 W 250 W 250 W 480 V MO W 1000 W 400 W 400 W 120/208/240/277 V MO V 195 W 1000 W 400 W 400 W 480 V STOCK NUMER LED LUMINIRE TLE 9. LUMINRE EQUIVLENT WTTGES - DIRECTIONL (FLOOD) LUMINIRES - MISSOURI LUMINIRE I.D. WTTGE LIGHT EMITTING DIODE (LED) MERCURY VPOR (MV) METL HLIDE (MH) PULSE-STRT (PMH) HIGH PRESS. SODIUM (HPS) MO W 400 W 250 W & 400 W (1) 250 W 120/208/240/277 V MO V 98 W 400 W 250 W & 400 W (1) 250 W 480 V MO W 1000 W MO V 150 W 1000 W - HID FIXTURE WTTGE VOLTGE (1) 400 W 120/208/240/277 V (1) 400 W 480 V MO X1 300 W W 1000 W 120/208/240/277 V NOTES: 1. In Missouri only the 400 W Pulse Start Metal Halide (PMH) and probe start Metal Halide (MH) directional (flood) luminaires will be replaced with the LED 250 W equivalent luminaire. ENG: WW REV: 11 REV. DTE: 09/01/2017

11 General Information Sheet 10 of References Chart Illinois STOCK NUMER LED LUMINIRE TLE 10. LUMINRE EQUIVLENT WTTGES - RCKET MOUNT LUMINIRES - ILLINOIS LUMINIRE I.D. LIGHT EMITTING DIODE (LED) MERCURY VPOR (MV) HID FIXTURE WTTGE METL HLIDE (MH) PULSE-STRT (PMH) HIGH PRESS. SODIUM (HPS) VOLTGE IL W 100/150/175/250 W 150 W & 175 W 70 W & 100 W 120/208/240/277 V IL 10 TYPE V 39 W 100/150/175/250 W 150 W & 175 W 70 W & 100 W 120/208/240/277 V IL W 400 W 250 W 250 W 120/208/240/277 V IL V 107 W 400 W 250 W 250 W 480 V IL W 1000 W 400 W 400 W 120/208/240/277 V IL V 190 W 1000 W 400 W 400 W 480 V ENCLOSED COR HED, SEMI CUTOFF 120 V, V ND 480 V ENCLOSED COR HED, CUTOFF 120 V, V ND 480 V OPEN OTTOM/NEM HED 120 V LED 100 W, 250 W ND 400 W EQUIVLENT RCKET MOUNT LUMINIRE STOCK NUMER LED LUMINIRE TLE 11. LUMINRE EQUIVLENT WTTGES - DIRECTIONL (FLOOD) LUMINIRES - ILLINOIS LUMINIRE I.D. WTTGE LIGHT EMITTING DIODE (LED) MERCURY VPOR (MV) HID FIXTURE WTTGE METL HLIDE (MH) PULSE-STRT (PMH) HIGH PRESS. SODIUM (HPS) VOLTGE IL W 400 W 250 W 250 W 120/208/240/277 V IL V 98 W 400 W 250 W 250 W 480 V IL W 1000 W 400 W 400 W 120/208/240/277 V IL V 150 W 1000 W 400 W 400 W 480 V ENG: WW REV: 11 REV. DTE: 09/01/2017

12 HID LMPS Sheet 1 of 2 1. High Pressure Sodium (HPS) Lamps CLER HPS lamps must be used only in luminaires with ballasts designed for HPS lamps. HPS lamps require at least 1 minute to restrike after a power interruption. Standard lamp sizes and types are as follows: vg. Rated Life pprox. Initial Stock No. Lamp Watts Lamp Type (HRS) Lumens Lamp ase HPS 24,000+ 6,300 Mogul HPS 24,000+ 9,500 Mogul HPS 24, ,000 Mogul HPS 24, ,000 Mogul HPS 24, ,000 Mogul HPS 24, ,000 Mogul 2. Probe Start Metal Halide (MH) Lamps (Replacement for the existing probe start metal halide (MH) luminaires) MH lamps must be used only in luminaires ballasts designed for MH lamps. MH lamps require approximately 7 to 12 minutes to restrike after a power interruption. Standard lamp sizes and types are as follows: vg. Rated Life pprox. Initial Stock No. Lamp Watts Lamp Type (HRS) Lumens Lamp ase MH 10,000 14,400 Mogul MH 7,500 20,000 Mogul MH 15,000 32,000 Mogul MH 12, ,800 Mogul 3. Pulse Start Metal Halide Lamps (PMH) (Use in Pulse start metal halide (PMH) luminaire) PMH lamps must be used only in luminaires ballasts designed for PMH lamps. PMH lamps require approximately 5 to 7 minutes to restrike after a power interruption. Standard lamp sizes and types are as follows: vg. Rated Life pprox. Initial Stock No. Lamp Watts Lamp Type (HRS) Lumens Lamp ase PMH 16,000 9,000 Medium PMH 12,000 12,900 Medium PMH 12,000 19,000 Mogul PMH 20,000 40,000 Mogul ENG:WYW REV. NO: NEW REV. DTE: 01/21/10

13 HID LMPS Sheet 2 of 2 4. Mercury Vapor (MV) Lamps (Replacement for existing mercury vapor luminaires only) MV lamps must be used only in luminaires with ballasts designed for MV lamps. MV lamps require at least 6 minutes to restrike after a power interruption. Standard lamp sizes and types are as follows: vg. Rated Life pprox Initial Stock No. Lamp Watts Lamp Type (HRS) Lumens Lamp ase MV 24,000+ 8,500 Mogul MV 24, ,000 Mogul MV 24, ,000 Mogul MV 24, ,000 Mogul IMPORTNT 1. PMH lamps are not interchangeable with MH lamps. 2. If a PMH lamp is placed inside of a MH luminaire, the lamp will not ignite or will not start. 3. If a MH lamp is placed inside of a PMH luminaire, the lamp will ignite or start very quickly. The MH lamp is not designed to run on the PMH ballast and will experience a very short lamp life. ecause of the high start up voltage that is delivered across the ballast by the ignitor to the lamp, the lamp is subject to a non passive end of life and could rupture the lamp arc tube. It is very important to always close the fixture optical before testing the lamp or starting the MH/PMH luminaire. 4. MV and MH/PMH lamps may continue to operate for some time even though the out glass envelope is missing. These lamps should be removed from service as soon as possible since they are a source of ultraviolet radiation when operating in this condition. 5. ll PMH lamps and HPS lamps (not LU/plus) cycle at end of life. ENG:WYW REV. NO: NEW REV. DTE: 01/21/10

14 Photocontrols Sheet 1 of 1 FIGURE 1 FIGURE 2 FIGURE " WLL THICKNESS 2.55" CLER WINDOW 2.47" 1.12" 3.25" 3.16" 3.16" HEVY DUTY LONG LIFE STNDRD DUTY UPWRD LOOKING ILLINOIS ONLY SHORTING COVER STOCK NUMER STTE VOLTGE TLE 1. LIGHT CONTROL MTERIL DESCRIPTION (1,3,4) MO/IL V PHOTOCELL, 1000W; FIL ON (1,3,4) MO/IL 480V PHOTOCELL, 1000W; FIL ON (2,3,4) IL 120V PHOTOCELL, UPWRD LOOKING, 1000W; FIL ON MO/IL - PLUG, SHORTING, PHOTOELECTRIC CELL HOUSING HOUSING COLOR WINDOW TYPE STYLE FIG. NO. LCK NORTH HEVY DUTY ORIENTED (LONG LIFE, 20+ YERS) FIG. 1 YELLOW NORTH HEVY DUTY ORIENTED (LONG LIFE, 20+ YERS) FIG. 1 CLER UPWRD STNDRD DUTY (10+ YERS) FIG TWISTLOCK RECEPTCLE FIG. 3 NOTES: 1. Long life-heavy duty photocell must be used with Light Emitting Diode (LED) luminaire. 2. Upward looking photocontrol to be used ONLY when necessary to prevent mis-operation due to a point source of ambient light entering the photocontrol window. May be needed in area with a large number of lights where the light from one luminaire causes another to turn off. 3. Photocontrol must have instantaneous turn on and 3-5 second turn off delay. 4. See Material Specification for more information. ENG: ZSD REV. NO: 2 REV. DTE: 06/30/2017

15 Luminaire Components, NEM Head ** Sheet 1 of 1 C D Stnd. / Stk. No. Description Lamp HPS 70W Lamp HPS 100W Hood HPS 70W Hood HPS 100W 1 1 C Refl. W/O crylic (III) Refl. W/O crylic (V) 1 1 D Switch 100W PE Cell ENG:WYW REV. NO: 5 REV. DTE: 07/09/10

16 Luminaire Components Horizontal ** Sheet 1 of 3 NON CUTOFF CUTOFF HPS Standard 100W, 120V, Type III, Non Cutoff W, 120V, Type III, Cutoff W, 120V, Type III, Non Cutoff W, 120V, Type III, Cutoff W, 120V, Type III, Non Cutoff W, 120V, Type III, Cutoff Metal Halide Probe Start (MH) (1) (4) Standard 250W, 120V, Type III, Cutoff W, 120V, Type III, Non Cutoff W, 120V, Type III, Cutoff W, 120V, Type III, Non Cutoff Stnd. / Stk. No. Description ** Lamp HPS 100W Lamp, HPS, 250W Lamp, MH, 250W Lamp, HPS, 400W Lamp, MH, 400W Luminaire, 100W, 120V, HPS, NCO Luminaire, 100W, 120V, HPS, CO Luminaire, 250W, 120V, HPS, NCO Luminaire, 250W, 120V, HPS, CO 1 1, Luminaire, 250W, 120V, MH, CO 1 1, Luminaire, 250W, 120V, MH, NCO Luminaire, 400W, 120V, HPS, NCO Luminaire, 400W, 120V, HPS, CO 1 1, Luminaire, 400W, 120V, MH, CO 1 1, Luminaire, 400W, 120V, MH, NCO 1 C Switch, St. Lt., 1000W, 120/240/277V, P.E ENG:WYW REV. NO: 6 REV. DTE: 02/08/11

17 Luminaire Components Horizontal ** Sheet 2 of 3 NON CUTOFF CUTOFF HPS (4) Standard 250W, 480V, Type III, Cutoff W, 480V, Type III, Non Cutoff W, 120/208/240/277, Non Cutoff W, 480V, Type III, Non Cutoff W, 480V,Type III, Cutoff W, 120/208/240/277V, Type III, Type III, Non Cutoff Metal Halide Pulse Start (PMH) (2) (4) Standard 250W, 120V, Type III, Cutoff W, 120V, Type III, Non Cutoff W, 120V, Type III, Cutoff W, 120V, Type III, Non Cuotff Stnd. / Stk. No. Description ** Lamp HPS 250W Lamp, HPS, 400W Lamp PMH 250W Lamp PMH 400W Luminaire, 250W, 480V,HPS, CO Luminaire, 250W, 480V,HPS, NCO Luminaire, 250W, 120/208/240/277V, HPS, NCO Luminaire, 400W, HPS, SCO, 480V Luminaire, 400W, HPS, CO, 480V Luminaire, 400W, 120/208/240/277V, HPS, NCO 1 2, Luminaire, 250W, 120V, PMH, CO 1 2, Luminaire, 250W, 120V, PMH, NCO 1 2, Luminaire, 400W, 120V, PMH, CO 1 2, Luminaire, 400W, 120V, PMH, NCO 1 C Switch, St. Lt., 1000W, 120/240/277V, P.E Switch, St. Lt., 1000W, 480V, P.E ENG:WYW REV. NO: 6 REV. DTE: 02/08/11

18 Luminaire Components Horizontal ** Sheet 3 of 3 NON CUTOFF CUTOFF HPS (lack) (3) Standard 250W, 120V, Type III, Cutoff W, 120V, Type III, Non Cutoff Stnd. / Stk. No. Description ** Lamp HPS 250W Lamp, HPS, 400W Luminaire, 250, 120V,HPS, CO Luminaire, 250, 120V,HPS, NCO 1 C Switch, St. Lt., 1000W, 120/240/277V, P.E. 1 1 Notes: 1. Metal Halide Probe start (MH) Luminaires are no longer available from supplier. 2. Metal Halide Pulse start (PMH) Luminaires are to replace the obsolete MH Luminaires. 3. Stock items are available in MO only. 4. Stock item is available in IL only. ENG:WYW REV. NO: 6 REV. DTE: 02/08/11

19 ** Luminaire Components - LED racket Mount Luminaires Sheet 1 of 1 LED 100W, 250W ND 400W EQUIVLENT RCKET MOUNT LUMINIRE DESCRIPTION: MEREN MO, 4000K STNDRD LED 100W EQ., 120V-277V, TYPE II LED 100W EQ., 120V-277V, TYPE V LED 250W EQ., 120V-277V, TYPE III LED 250W EQ., 480V, TYPE III LED 400W EQ., 120V-277V, TYPE III LED 400W EQ., 480V, TYPE III DESCRIPTION: MEREN IL, 3000K STNDRD LED 100W EQ., 120V-277V, TYPE II LED 100W EQ., 120V-277V, TYPE V LED 250W EQ., 120V-277V, TYPE III LED 250W EQ., 480V, TYPE III LED 400W EQ., 120V-277V, TYPE III LED 400W EQ., 480V, TYPE III STOCK STTE DESCRIPTION NUMER LUMINIRE, LED 100W EQUIV., MO 1 120V-277V, TYPE II, 4000K LUMINIRE, LED 100W EQUIV., MO 1 120V-277V, TYPE V, 4000K LUMINIRE, LED 250W EQUIV., MO 1 120V-277V, TYPE III, 4000K LUMINIRE, LED 250W EQUIV., MO 1 480V, TYPE III, 4000K LUMINIRE, LED 400W EQUIV., MO 1 120V-277V, TYPE III, 4000K LUMINIRE, LED 400W EQUIV., MO 1 480V, TYPE III, 4000K LUMINIRE, LED 100W EQUIV., IL 1 120V-277V, TYPE II, 3000K LUMINIRE, LED 100W EQUIV., IL 1 120V-277V, TYPE V, 3000K LUMINIRE, LED 250W EQUIV., IL 1 120V-277V, TYPE III, 3000K LUMINIRE, LED 250W EQUIV., IL 1 480V, TYPE III, 3000K LUMINIRE, LED 400W EQUIV., IL 1 120V-277V, TYPE III, 3000K LUMINIRE, LED 400W EQUIV., IL 1 480V, TYPE III, 3000K SWITCH, LOD RTING 1000W, MO/IL V-277V, LCK, PE SWITCH, LOD RTING 1000W, MO/IL V, YELLOW, PE ENG: ZSD REV. NO: 1 REV. DTE: 06/30/2017

20 Luminaire Components Post Top Installation ** Sheet 1 of 2,C,C COLONIL ERLY MERICN C C SPEN CONTEMPORRY Notes: 1. Stk # is no longer available from supplier 2. Stk # is to replace Stk # Stock item is available in MO only. 4. Stock item is available in IL only. 5. Position luminaire to facilitate service from the street. 6. Type III, align refractor with street side. 7. Face eye of photo electric cell north. ENG:WYW REV. NO: 3 REV. DTE: 12/21/17

21 Luminaire Components Post Top Installation ** Sheet 2 of 2 Stnd. / Stk. No. Description ** Colonial, 100W, HPS, Type III (MO) Colonial, 100W, HPS, Type V (MO) Early merican, 100W, HPS, Type III Early merican, 100W, HPS, Type V 1, Early merican, 175W, MH, Type lll 2, Early merican, 150W, PMH, Type ll Contemporary, 100W, HPS, Type III Contemporary, 100W, HPS, Type V (LL) 1 (MO) 1 ( IL) 1 ( IL) 1 (MO) 1 (MO) spen, 100W, HPS, Type III (MO) spen, 100W, HPS, Type V (MO) Switch, Photo Electric Cell C Lamp, 100W, HPS Lamp, 175W, MH Lamp, 150W, PMH 1 ENG:WYW REV. NO: 3 REV. DTE: 12/21/17

22 Luminaire Components LED Decorative (Post Top) Luminaires ** Sheet 1 of 1 MISSOURI ONLY ND NEW CONSTRUCTION ONLY 21 1/2 27 1/2 30 1/2 31 COLONIL ERLY MERICN CONTEMPORRY OR TRDITIONL SPEN LED 100W EQUIVLENT DECORTIVE (POST TOP) LUMINIRES DESCRIPTION STNDRD LED 100W EQUIVLENT ERLY MERICN, 120V 277V, TYPE III, 3000K LED 100W EQUIVLENT ERLY MERICN, 120V 277V, TYPE V, 3000K LED 100W EQUIVLENT COLONIL, 120V 277V, TYPE III, 3000K LED 100W EQUIVLENT COLONIL, 120V 277V, TYPE V, 3000K LED 100W EQUIVLENT CONTEMPO/TRDITIONL, V, TYPE III, 3000K LED 100W EQUIVLENT CONTEMPO/TRDITIONL, V, TYPE V, 3000K LED 100W EQUIVLENT SPEN, 120V 277V, TYPE III, 3000K LED 100W EQUIVLENT SPEN, 120V 277V, TYPE V, 3000K STOCK STTE DESCRIPTION NUMER (1) ERLY MERICN, LED 100W EQUIV., MO 1 120V-277V, TYPE III, 3000K ERLY MERICN, LED 100W EQUIV., MO 1 120V-277V, TYPE V, 3000K (1) COLONIL, LED 100W EQUIVLENT, MO 1 120V-277V, TYPE III, 3000K COLONIL, LED 100W EQUIVLENT, MO 1 120V-277V, TYPE V, 3000K (1) CONTEMPORRY OR TRDITIONL, LED MO 1 100W EQUIV.,120V-277V, TYPE III, 3000K CONTEMPORRY OR TRDITIONL, LED MO 1 100W EQUIV.,120V-277V, TYPE V, 3000K (1) SPEN, LED 100W EQUIVLENT, MO V, TYPE III, 3000K SPEN, LED 100W EQUIVLENT, MO V, TYPE V, 3000K (2) PHOTOCONTROL / SWITCH, LOD MO/IL RTING 1000W, 120V-277V, LCK, PE NOTES: 1. lign distribution light pattern TYPE III refractor with street side. 2. Face the eye of the photocell to the north. ENG:WYW REV. NO: 1 REV. DTE: 09/29/17

23 Luminaire Components Directional Flood ** Sheet 1 of 2 HPS Standard 250W, 120V, 6x6 Directional W, 120V, 7x6 Directional W, 480V, 6x6 Directional W, 480V, 7x6 Directional MH(1) 1000 WTT 250W, 120V, 6x6 Directional W, 120V, 6x5 Directional W, 480V, 6x5 Directional W, 120V, 7x6 Directional PMH(2) 250W, 120V, 6x6 Directional W, 120V, 6x5 Directional W, 480V, 6x5 Directional WTT IMING NGLE PROFILE ENG: WYW REV. NO: 3 REV. DTE: 01/21/10

24 Luminaire Components Directional Flood ** Sheet 2 of 2 Stnd. / Stk. No. Description ** Floodlight, HPS 250W, 120V ll Floodlight, HPS 400W, 120V ll 1 1, 4 C Floodlight, MH, 250W, 120V IL 1 1 D Floodlight, MH, 400W, 120V ll , 4 E Floodlight, PMH, 250W, multi IL 1 2 F Floodlight, PMH, 400W, 120V ll 1 3 G Floodlight,MH, 1000W, 120V (MO ONLY) H Lamp, HPS, 250W 1 I Lamp, HPS, 400W 1 1 J Lamp, MH, 250W 1 1 K Lamp, MH, 400W 1 1 L Lamp, PMH 250W 1 M Lamp, PMH 400W 1 1 N Lamp, MH, 1000W 1 O Switch, Photoeletric,120/240/277V P Floodlight, HPS 250W, 480V IL 1 1, 4 Q Floodlight, MH 400W, 480V IL 1 2, 4 R Floodlight, PMH, 400W, 480V IL 1 4 S Floodlight, HPS 400W, 480V IL 1 Notes: T Switch, Photoelectric, 480V Metal Halide Probe start (MH) Luminaires are no longer available from supplier. 2. Metal Halide Pulse start (PMH) Luminaires are to replace the obsolete MH Luminaires with equal wattage. 3. Stock No is available for new installation in MO only. 4. Stock item is available in IL only. ENG: WYW REV. NO: 3 REV. DTE: 01/21/10

25 Luminaire Components - LED Directional (Flood) Luminaires ** Sheet 1 of /2" 26 1/2" IMING FROM -30 TO +60 OFF HORIZON LED 250W EQUIVLENT DIRECTIONL (FLOOD) LUMINIRE LED 400W ND 1000W EQUIVLENT DIRECTIONL (FLOOD) LUMINIRE DESCRIPTION: MEREN MO, 4000K STNDRD LED 250W EQUIV., 120V-277V LED 250W EQUIV., 480V LED 400W EQUIV., 120V-277V LED 400W EQUIV., 480V LED 1000W EQUIV., 120V-277V DESCRIPTION: MEREN IL, 3000K STNDRD LED 250W EQUIV., 120V-277V LED 250W EQUIV., 480V LED 400W EQUIV., 120V-277V LED 400W EQUIV., 480V STOCK STTE DESCRIPTION NUMER LUMINIRE, LED 250W EQUIVLENT, MO 1 120V-277V, 6X6, 4000K LUMINIRE, LED 250W EQUIVLENT, MO 1 480V, 6X6, 4000K LUMINIRE, LED 400W EQUIVLENT, MO 1 120V-277V, 6X6, 4000K LUMINIRE, LED 400W EQUIVLENT, MO 1 480V, 6X6, 4000K LUMINIRE, LED 1000W EQUIVLENT, MO 1 120V-277V, 6X6, 4000K LUMINIRE, LED 250W EQUIVLENT, IL 1 120V-277V, 6X6, 3000K LUMINIRE, LED 250W EQUIVLENT, IL 1 480V, 6X6, 3000K LUMINIRE, LED 400W EQUIVLENT, IL 1 120V-277V, 6X6, 3000K LUMINIRE, LED 400W EQUIVLENT, IL 1 480V, 6X6, 3000K PHOTOCONTROL / SWITCH, LOD MO/IL RTING 1000W, 120V-277V, LCK, PE PHOTOCONTROL / SWITCH, LOD MO/IL RTING 1000W, 480V, YELLOW, PE ENG: ZSD REV. NO: NEW REV. DTE: 06/30/2017

26 Multiple Installation On Wood Pole ** Sheet 1 of 1 ENG: REV. NO: REV. DTE:

27 Multiple Installation On Wood Line Pole bove Communications ** Sheet 1 of MIN. J G,H 6 R. MIN. 3 4 MIN. C,D F K 16 MIN 20 MIN. 20 MIN. 12 MIN. 1 1/4 X 30 RKT. 1 1/4 X 6 RKT. 1 1/4 X 15 RKT Notes: 1. See Dist. Std for correct bracket to use. 2. Face eye of photocell north. Stnd. / Stk. No. Description ** rkt., St. Lt., 1 1/4 x rkt., St. Lt., 1 1/4 x rkt., St. Lt., 1 1/4 x C olt, Mach., 5/8 x D Washer, Square 2 1/ E Screw, Lag 1/2 x F Cable, St. Lt., Twisted (ft.) G Moulding, 1/ H Staple, 5/8 x J Staple, 3/8 x 1 3/4 C.W K Guard Cable, 1/2, Poly 1 1 L ** ** St. Lt. ssembly ENG:WYW REV. NO: 5 REV. DTE: 01/21/10

28 Multiple Installation Ornamental Concrete Pole Overhead Circuit Deadend ** Sheet 1 of 2 2 J N 23 0, 28 0 TO GROUND LINE * 500 lbs 600 lbs 500 lbs MX LODING ON POLE RCKET 28 0 Pole 33 0 Pole 6 racket REINFORCED POLE ROCK, CRUSHED 1 LIMESTONE SCREENINGS NOTE: *Not standard for new installations and replace with a fiberglass pole for maintenance if applicable. ENG:WYW REV. NO: 9 REV. DTE: 07/29/14

29 Multiple Installation Ornamental Concrete Pole Overhead Circuit Deadend ** Sheet 2 of 2 NOTES: 1. Limestone screenings to be wetted and thoroughly tamped to provide solid compaction around pole. 2. Face eye of photo electric switch north. Stnd. / Stk. No. Description ** * Pole, St. Lt., Con., 28 0 O.H./23 M.H * Pole, St. Lt., Con., 33 0 O.H./28 M.H racket, St. Lt., 2 x C Cable, St. Lt., Twisted D Clevis, Secondary 1 1 E Clamp, D.E., Wedge Type 1 1 F and, Pole, Steel, Galv. 1 1 H Rock, Crushed Limestone Screnning Lbs 850 J ** ** St. Lt. ssembly 1 1 L Guard, Cable, 1/2, Poly 2 2 M Insulator, Spool 1 N Connector, PG #6 1/0 WG Main/Tap Connector, Split, #6 WG L Main/#14 WG Cu Tap 2 2 LIMITED USE STNDRD* ENG:WYW REV. NO: 9 REV. DTE: 07/29/14

30 Multiple Installation Ornamental Concrete Pole Overhead Circuit Tangent or ngle ** Sheet 1 of 2 2 K E,H,L F POLE 33 0 POLE 18 6 RCKET C D 23 0, 28 0, or lbs 600 lbs 500 lbs MX LODING ON POLE RCKET * 2 1/2 X 8 WIRING HNDHOLE GROUND LINE TMPED ERTH OR CONCRETE SIDEWLK G 1 20 NOTE: *Not standards for new installations and replace with a fiberglass pole for maintenance if applicable. ENG:WYW REV. NO: 10 REV. DTE: 01/21/10

31 Multiple Installation Ornamental Concrete Pole Overhead Circuit Tangent or ngle ** Sheet 2 of 2 NOTES: 1. Limestone screenings to be wetted and thoroughly tamped to provide solid compaction around pole. 2. Face eye of photocontrol switch north. 3. Connect twisted pair street light cable to supply line using connector, Stock No Stnd. / Stk. No. Description ** * Pole, St. Lt., Con., 28 0 O.H./23 M.H * Pole, St. Lt., Con., 33 0 O.H./28 M.H racket, St. Lt., 2 x C Cable, St. Lt., Twisted D Guard Cable, 1/2, Poly 1 1 E Clevis, Secondary 1 1 F and, Pole, Steel, Galv. 1 1 G Rock, Crushed Limestone Screening Lbs H Wire Tie, #4 l. Poly I Insulator, Spool 1 K ** ** St. Lt. ssembly 1 1 LIMITED USE STNDRD* ENG:WYW REV. NO: 10 REV. DTE: 01/21/10

32 Multiple Installation Ornamental Concrete Pole Underground Circuit ** Sheet 1 of 2 6 RCKET 28 0 POLE 33 0 POLE , 28 0, or 35 0 * 1 NOTE: *Not standard for new installations and Replace with a fiberglass pole for maintenance if applicable. ENG:WYW REV. NO: 7 REV. DTE: 12/11/09

33 Multiple Installation Ornamental Concrete Pole Underground Circuit ** Sheet 2 of 2 NOTES: 1. Limestone screenings shall be wetted and thoroughly tamped as installed. 2. Face eye of photoelectric switch north. Stnd. / Stk. No. Description ** * Pole, St. Lt., Con., 28 0 O.H./23 M.H * Pole, St. Lt., Con., 33 0 O.H./28 M.H racket, St. Lt., 2 x C Cable, St. Lt., Twisted (ft.) D Sealer, Red Pedigree (pint) 1 1 F Connector, olted/set Screw #14 2/0, 3 Pos. 2 2 J Limestone Screenings (lb.) 850 K ** ** St. Lt. ssembly 1 1 LIMITED USE STNDRD* ENG:WYW REV. NO: 7 REV. DTE: 12/11/09

34 Fiberglass Pole 30 and 35 U.G. Circuit ** Sheet 1 of or racket 30 0 Pole (Gray) 35 0 Pole (Gray) Pole (lack) 35 0 Pole (lack) x 12 WIRING HNDHOLE SIDEWLK ENG:WYW REV. NO: 4 REV. DTE: 01/21/10

35 Fiberglass Pole 30 and 35 U.G. Circuit ** Sheet 2 of 2 Notes: 1. Face photocontrol north. 2. Limestone screenings to be wetted and thoroughly tamped to provide solid compaction around pole 3. OK to install second bracket at 180 o if required. 4. * For MO only. Stnd. / Stk. No. Description ** Pole, St. Lt., Fiberglass, 30 O.H Pole, St. Lt., Fiberglass, 35 O.H * Pole, St. Lt., Fiberglass, lack, 30 O.H * Pole, St. Lt., Fiberglass, lack, 35 O.H racket, L * racket, L. lack, C Cable, St. Lt., #10 2 Conductor Ft E Connector, olted/set Screw #14 2/0. 3 Pos F Tape, Rubber 3/ G Rock, crushed, limestone screenings H ** ** Street light assembly ENG:WYW REV. NO: 4 REV. DTE: 01/21/10

36 Fiberglass Pole 30 and 35 O.H. Circuit Tangent, ngle, or Deadend ** Sheet 1 of 2 G E,M F 1 E,M,N J 1 N C L N F J C L DEDEND DEDEND TNGENT or NGLE TNGENT or NGLE 4 x 12 WIRING HNDHOLE 3 18 GROUND LINE TMPED ERTH OR CONCRETE SIDEWLK SIDEWLK /2 x 6 CONDUCTOR ENTRNCE W / GROMMET THRU OTH SIDES ENG: WYW REV. NO: 1 REV. DTE: 07/29/14

37 Fiberglass Pole 30 and 35 O.H. Circuit Tangent, ngle, or Deadend ** Sheet 2 of 2 Notes: 1. Face photocontrol north. 2. Limestone screenings to be wetted and thoroughly tamped to provide solid compaction around pole 3. OK to install second bracket at 180 degree if required. Stnd. / Stk. No. Description ** Pole, St. Lt., Fiberglass, Pole, St. Lt., Fiberglass, racket, L C Cable, St. Lt #10 2 Conductor ft E Clevis, Secondary F and, Pole, Steel, Galv G Clamp, DE Wedge Type 1 N Connector, PG, #6 #10WG Main/Tap Connector, Split, #2 #6WG L Main/#14 WG Cu Tap L Guard, Cable, 1/2, Poly M Insulator, Spool J ** ** St. Lt. ssembly H Rock, Crushed Limestone Screening lbs O Wire Tie, #4l. Poly ENG: WYW REV. NO: 1 REV. DTE: 07/29/14

38 DIRECTIONL OUTDOOR LIGHTING On Wood Pole Directional Flood ** Sheet 1 of 1 SECONDRY OR SERVICE, IF PRESENT 12 MIN. 3 D 1 F 2 FOR MINIMUM ND PREFERRED MOUNTING HEIGHT SEE H G J,K 22 9 TYP. C I 36 Long 20 MIN. 12 MIN. DOULE LUMINIRE MOUNTING GROUND LINE COMMUNICTION, IF PRESENT SINGLE LUMINIRE MOUNTING NOTES: 1. Face photocontrol north, but multiple luminaires at the same location, adjust photocell socket to face control away from nearby light sources. 2. Connect these luminaires to a proper source. 3. Increase this dimension by 4 if open service wires extend directly out over photocell. Stnd. / Stk. No. Description ** ** Luminaire, Directional Flood 1 2 C racket, Floodlight, 18 1 F Staple 3/8 x 1 3/4 C.W. 1 1 G Moulding 1/2 1 1 H Staple 5/8 x I racket, Double Flood Mounting 1 J olt, Mach. 5/8 x 10, Galv. 1 1 K Washer, Square 2 2 L Screw, Lag 1/2 x ENG: WYW REV. NO: 9 REV. DTE: 01/21/10

39 Multiple Cable Termination Riser For Direct uried Circuit Sheet 1 of 1 F 5 G Neutral F G E NOTES: 1. If the customer furnishes the cable, it must be approved by the National Electric Code for direct burial and exposure to sunlight. The customer cable should extend to the base of the pole or to a point designated by meren. (normally 2 0 inside the customer s property line). The customer must provide enough cable to allow the connections to be made on the pole. 2. It is recommended that direct buried cable be installed in conduit under driveways and parking areas. 3. Drive the lag screw into the pole so that the schedule 80 conduit will rest on the head; thus preventing the conduit from sliding down. 4. If triplex cable is used, two fuses are required. dditional fuse sizes are available: 15 MP Stock # MP Stock # MP Stock # Install the fuse parallel to the wire so that the spring loaded indicator can flip open to show that the fuse has blown. 6. Cut the poly strap into one foot lengths. Wrap each section of the strap around the cable and secure the ends to the pole. 24 D 3 2 Stnd. / Stk. No. Description Quantity Conduit Plastic, 2 15 Ft Iron Hanger 10 Ft. C Conduit Plastic, Sch 80, 2 10 Ft. 3 D Screw Lag, 1/2 x E Strap Poly, 2 x ,5 F Fuse Secondary, 30 mp G PG* See Std Operation Code ENG:WYW REV. NO: 4 REV. DTE: 03/12/07 REFFIRMED DTE: 06/28/11

40 Post Top Installation Fiberglass Pole 14 Foot Mounting Height Sheet 1 of 1 3 E NOTES: Limestone screenings to be wetted and thoroughly tamped to provide solid compaction around the pole. 2. Generally only one tag per street light shall be installed. If more than one street light installed on the same pole, one tag per street light is required, and each tag should be installed on the same quadrant of the light. The tag should be installed visibly from the ground level but not reachable from public. See Dist. Std for more details. 3. In Missouri residential developments, the contractor will install 1 1/2 inch conduit to the pole site. meren will install the pole and the cable. 4. For fuse underground streetlight cable at pad mount transformer or pedestal, See Dist. Std **. 2 1/2 X 5 WIRING HNDHOLE F E 1 D 18 TO CENTER OF HNDHOLE 2 0 MIN. 3 0 D C 6 Stnd. / Stk. No. Description Qty. 5 1/2 12 DI Pole FG, lack, w/hand hole 1 Rock, Crushed Limestone Screening 200 C Conduit Poly 1 D Cable Duplex #6 l. E Cable, St. Lt., #10 2 conductor Ft. 17 F Connector, olt/set Screw, #4 2/0,3Pos. 2 ENG:WYW REV. NO: 8 REV. DTE: 01/21/10

41 Street Lighting Pole/Conduit Sheet 1 of 1 HND HOLE FINL GRDE C WIRE CCESS HOLE IN POLE ( REMOVE GROMMET & ENLRGE HOLE 3 0 for 17 Pole 5 0 for Pole MTERIL INSTLLED Y CONTRCTOR Stnd. / Stk. No. Description Qty Plug Conduit 1 1/ Marker uried Conduit 1 C Conduit Reducer 2 to 1 1/2 1 ENG: WYW REV. NO: 1 REV. DTE: 08/17/10

42 Street Lighting / Splice ox Installation Sheet 1 of 1 Customer cut top of conduit bend so 3 stub extends thru bottom of box. Final Grade 12 D Street Light Pole Installed by meren 24 Conduit Depth 3 C Minimum 10 1 Clean Gravel 24 Radius end NOTES: 1. Customer installs meren supplied box. Stnd. / Stk. No. Description Qty Plug Conduit, 1 1/ Marker uried Conduit 1 C Conduit Reducer 2 to 1 1/2 1 1 D Poly Splice ox 9 3/4 (W) x 14 (L) x 12 (D) 1 ENG:WYW REV. NO: NEW REV. DTE: 01/21/10

43 Installation of Underground Street Light Cable on a Wood Pole ** Sheet 1 of 2 NOTE 2 NOTE C 3 60 C 3 E 12 MIN. 24 MIN. 24 MIN. NOTE 1 D 1 1/2 Conduit Direct uried Direct uried (subject to physical damage) In Conduit In Conduit (subject to physical damage) ENG:WYW REV. NO: 6 REV. DTE: 01/21/10

44 Installation of Underground Street Light Cable on a Wood Pole ** Sheet 2 of 2 NOTES: 1. s an underground alternative, where multiple lights are being installed direct bury a T splice per Dist. Std to avoid running the cable up and down the pole. 2. Pole, bracket, and luminaire must be listed separately. 3. If pole is subject to physical damage, use schedule 80 conduit for the first 10 ft. section up to the pole. Stnd./Stk. No. Description ** Cable URD, St. Lt. #6 Duplex, l. s Req. s Req. s Req. s Conduit Plastic, 1 Sch. 40 s Req. s Req Conduit Plastic, 1 Sch. 80 s Req. s C Strap Conduit, 1 1/2 in. 2 Hole s Req. s Req. s Req. s Req. D end 1 1/2, 24 Rad. 1 1 E Reducer 1 1/2 to ENG:WYW REV. NO: 6 REV. DTE: 01/21/10

45 Multiple Installation 30 reakaway Pole Underground Circuit ** Sheet 1 of 2 MO ONLY MO ONLY MO ONLY R P D x 12 WIRING HNDHOLE REKWY JOINT 3 3 N M FIERGLSS POLE 6 RCKET RCKET GLVNIZED STEEL POLE 6 RCKET RCKET EMEDMENT DETIL CLE TERMINTION IN SE ENG: WYW REV. NO: 8 REV. DTE: 01/21/10

46 Multiple Installation 30 reakaway Pole Underground Circuit ** Sheet 2 of 2 NOTES: 1. For U.E. 120 Volt circuit use one fuse in energized line and one fuse slug (# ) in neutral. 2. Wrap plastic tie around wires where they enter bracket. 3. Screenings to be wetted and thoroughly tamped. MO ONLY MO ONLY MO ONLY Stnd. / Stk. No. Description ** Pole, Steel, Galv Pole, Fiberglass, reakaway, ase, Transf. l. 1 1 C Foundation, Steel Pile rkt., St. Lt. 2 x D rkt., St. Lt. 2 x rkt., St. Lt. Fbrgl. Mtg., rkt. St. Lt. Fbrgl. Mtg., 12 1 E Connector, Fusible F Fusetron Cart., 10 mp G Cable, St. Lt. #10 (ft.) J Rod, Ground 5/8 x K Clamp, Ground Rod 5/8, For #8 1/0 1 1 L Wire, S.D., #6.C. (ft.) M Conduit, Poly. 1 (ft.) N Rock, Crushed, Limestone,1/2, Clean (lb) P Tie, Cable 1/2 x 6 Poly. 2 2 Q Concrete Premix 90# 2 R ** ** St. Lt. ssembly ENG: WYW REV. NO: 8 REV. DTE: 01/21/10