34.00 METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE
|
|
- Daniella Summers
- 6 years ago
- Views:
Transcription
1 4. METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE SELF-CONTAINED METERING, SINGE-PHASE INSTALLATION DETAILS /4 VOLT SINGLE-PHASE UNDERGROUND RESIDENTIAL SERVICE AND METER SOCKET CONNECTIONS SECONDARY SELF-CONTAINED METER WIRING DIAGRAM, SINGLE-PHASE, -WIRE SECONDARY SELF-CONTAINED METER WIRING DIAGRAM, SINGLE-PHASE, -WIRE SELF-CONTAINED METERING, THREE-PHASE SECONDARY SELF-CONTAINED 4-WIRE DELTA WIRING DIAGRAM 4.-6 HIGH PHASE LOCATION ON DELTA SERVICE AND STANDARD PHASE ROTATION FOR SELF-CONTAINED METER BASES ONLY 4.-8 SECONDARY SELF-CONTAINED 4-WIRE WYE METER WIRING DIAGRAMS SELF-CONTAINED METERING, NETWORK (OPEN WYE) /8 VOLT -WIRE NETWORK SELF-CONTAINED METERING WIRING DIAGRAM SECONDARY SELF-CONTAINED METER WIRING CONNECTIONS, /8 VOLT -WIRE - NETWORK TRANSFORMER-RATED METERING, SECONDARY, THREE-PHASE CT CABINET INSTALLATION ON SERVICE RISER, THREE-PHASE, 4-WIRE OR SINGLE-PHASE, -WIRE SERVICE CURRENT TRANSFORMER INSTALLATION FOR SECONDARY METERING 4.7- CT CABINET INSTALLATION ON THREE-PHASE, 4-WIRE WALL MOUNTED TRANSFORMER-RATED METERING, PRIMARY, SINGLE-PHASE SINGLE-PHASE PRIMARY METERING INSTALLATION - 5 KV OVERHEAD CLUSTER TRANSFORMER-RATED METERING, PRIMARY, THREE-PHASE POLYPHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD VERTICAL CLUSTER THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD VERTICAL CLUSTER THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD HORIZONTAL CLUSTER THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, 6 AMP, -/ ELEMENT, OVERHEAD HORIZONTAL CLUSTER THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, AMP, -/ ELEMENT, OVERHEAD HORIZONTAL CLUSTER THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD HORIZONTAL CLUSTER TRANSFORMER-RATED METERING, PRIMARY, THREE-PHASE - UG THREE-PHASE PRIMARY METERING ENCLOSURE FRONT VIEW AND FOOTPRINT THREE-PHASE PRIMARY METERING ENCLOSURE BUSHING AND CT/PT LAYOUT THREE-PHASE PRIMARY METERING ENCLOSURE FOR MAINTENANCE ONLY DRAWINGS THE FOR MAINTENANCE ONLY DRAWINGS LISTED BELOW ARE NOT CONTAINED IN THE PRINTED SPEC BOOK, BUT ARE AVAILABLE ONLINE THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, -/ ELEMENT, OVERHEAD HORIZONTAL CLUSTER (FMO) /8/4 KATIGBAK DANNA /5/ KATIGBAK GUINN SECTION 4 - METERING - OH TABLE OF CONTENTS DEC DEM DEP DEF X 4.-A
2 MINIMUM /6" THICK MINIMUM /4" HIGH LETTERS /4" MINIMUM -/" MINIMUM NOTES:. ON INSTALLATIONS, REPAIRS, REPLACEMENTS OR UPGRADES OF ENCLOSURES INVOLVING MORE THAN ONE METER ON A SINGLE PREMISE, THE CUSTOMER SHALL CORRECTLY IDENTIFY EACH METER ENCLOSURE ON THE OUTSIDE BY A NONFERROUS METAL OR PLASTIC PLATE ENGRAVED OR STAMPED WITH THE APARTMENT NUMBER, OFFICE SUITE, LOT NUMBER, ETC.. THE PLATE SHALL BE PERMANENTLY ATTACHED TO THE METER ENCLOSURE UTILIZING AN INDUSTRIAL-STRENGTH ADHESIVE SUITABLE FOR EXTERIOR USE. TWO-SIDED TAPE IS NOT ACCEPTABLE.. THE INSIDE OF EACH METER ENCLOSURE SHALL BE CORRECTLY IDENTIFIED WITH A PLATE DESCRIBED ABOVE OR WITH A PERMANENT MARKER. 4. CONDUCTOR LABELING FOR MULTI-TENANT METERING APPLICATIONS: WHERE ONE SERVICE IS C.T. METERED ON THE PAD-MOUNTED TRANSFORMER AND OTHER CUSTOMER OWNED SERVICES ARE RUN TO THE SAME TRANSFORMER BUT ARE METERED ELSEWHERE (BUILDING WALL OR METER ROOM), BOTH ENDS OF ALL CUSTOMER CABLES MUST BE CLEARLY AND SPECIFICALLY MARKED FOR PHASE AND LABELED WITH A TAG TO IDENTIFY THE LOCATION OF THE SOURCE AND LOAD ENDS OF THE CONDUCTOR. THE LOAD END OF EACH CABLE SHALL BE LABELED TO IDENTIFY THE SOURCE (TRANSFORMER LOCID NUMBER). EACH SOURCE END SHALL BE LABELED TO IDENTIFY THE LOCATION OF THE LOAD END OF THE CABLE (TROUGH NUMBER, SWITCH PANEL NUMBER, ETC.). 9//4 SIMPSON SIMPSON /9/ GUINN GUINN LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE DEC DEM DEP DEF X X 4.-4
3 INSTALLATION DETAILS /4 VOLT SINGLE-PHASE UNDERGROUND RESIDENTIAL SERVICE METER SOCKET INSTALLED BY CONTRACTOR NEUTRAL NEUTRAL BUSHING LOCKOUT WIRE BRUSH AND USE INHIBITOR ON ALL LUGS ATTACH CONDUIT THROUGH LEFT KNOCKOUT ON BOTTOM SIDE OF METER SOCKET MALE ADAPTER DETAIL A SEE DETAIL "A" INSTALLED BY COMPANY LINE LOAD THIS ILLUSTRATION IS FOR DE-ENERGIZED CONDITIONS. IF METER IS ENERGIZED USE PROPER SAFETY PROCEDURES AS OUTLINED IN THE ACCIDENT AND PREVENTION MANUAL. METER BASE MAY BE ENERGIZED FROM CUSTOMER LOAD SIDE. METER SOCKET CONNECTIONS METER GROUND INSTALLED BY CUSTOMER C L 4'-" MIN. 5'-6" MAX. " PRE-BENT PVC CONDUIT 6" MIN INSERT -/" CIC AT LEAST 6" INTO " PVC TO KEEP SAND OUT OF CONDUIT NOTE: CABLE SHOULD BE FED THROUGH CONDUIT BEFORE IT IS INSTALLED BELOW GRADE AND ATTACHED TO METER SOCKET. /5/ GUINN GUINN INSTALLATION DETAILS /4 VOLT SINGLE-PHASE UNDERGROUND RESIDENTIAL SERVICE AND METER SOCKET CONNECTIONS 4.-8
4 V LINE -/4" (TYP.) " (TYP.) LOOP WIRE DO NOT CUT LOAD 8" (TYP.) /5/ GUINN GUINN SECONDARY SELF-CONTAINED METER WIRING DIAGRAM, SINGLE-PHASE, -WIRE 4.-
5 4V V V 4-/" (TYP.) 5" (TYP.) " (TYP.) /5/ GUINN GUINN SECONDARY SELF-CONTAINED METER WIRING DIAGRAM, SINGLE-PHASE, -WIRE 4.-4
6 HIGH PHASE N 4V 8V 4V V V 4V "S" BASE THREE-PHASE, FOUR WIRE, DELTA /5/ GUINN GUINN SECONDARY SELF-CONTAINED 4-WIRE DELTA WIRING DIAGRAM 4.-6
7 N LINE HIGH PHASE LOCATION ON DELTA SECONDARY SERVICE C B A KNOPP MODEL K- AND K-6 PHASE SEQUENCE INDICATOR LEADS METER BASE N LOAD NOTE: PGN GENERATORS TURN COUNTER CLOCKWISE TO PROVIDE ABC POSITIVE SEQUENCE ROTATION. THE KNOPP METER IS CONNECTED INTERNALLY SUCH THAT THE MECHANICAL ROTATION OF THE DISC WILL BE CLOCKWISE IF THE RED/WHITE/BLUE LEADS ARE CONNECTED TO A/B/C PHASE, RESPECTIVELY, WHICH INDICATES POSITIVE SEQUENCE ABC ROTATION. HIGH PHASE LOCATION ON DELTA SECONDARY SERVICE NOTE: CONNECT ON LINE SIDE OF METER BASE WITH LEADS A, B, C (LEFT TO RIGHT) TO IDENTIFY CLOCKWISE OR COUNTER-CLOCKWISE ROTATION TO THIS SERVICE. THIS WILL IDENTIFY PHASE ROTATION ONLY: IT IS NOT AN INDICATION OF SOURCE PHASE IDENTIFICATION. SEE DWGS..4-A,.4-B AND.4-C FOR STANDARD CABLE TAGGING. INSTALL APPROPRIATE PHASE ROTATION INDICATION STICKER ON THE FACE OF THE METER BASE BELOW METER GLASS AND ALSO INSIDE THE METER BASE: COUNTERCLOCKWISE: CN 44 CLOCKWISE: CN 44 WATT HOUR METER METER BASE STANDARD PHASE ROTATION IDENTIFICATION PROCEDURE FOR SELF-CONTAINED METER BASES ONLY /5/ GUINN GUINN HIGH PHASE LOCATION ON DELTA SERVICE AND STANDARD PHASE ROTATION FOR SELF-CONTAINED METER BASES ONLY 4.-8
8 8V N V V V N "S" BASE THREE-PHASE, FOUR WIRE, WYE /8 VOLTS 48V N 77V N 77V 77V "S" BASE THREE-PHASE, FOUR WIRE, WYE 77/48 VOLTS /5/ GUINN GUINN SECONDARY SELF-CONTAINED 4-WIRE WYE METER WIRING DIAGRAMS 4.-
9 V N 8V V V N "S" BASE THREE WIRE NETWORK /5/ GUINN GUINN /8 VOLT -WIRE NETWORK SELF-CONTAINED METERING WIRING DIAGRAM 4.4-
10 8V V V 4-/" (TYP.) FIFTH JAW LOCATION (9 O'CLOCK POSITION PREFERRED) FOR /8V. SERVICE INSTALLED BY THE CUSTOMER WHEN REQUIRED (BONDED TO NEUTRAL LUG) 5" (TYP.) " (TYP.) /5/ GUINN GUINN SECONDARY SELF-CONTAINED METER WIRING CONNECTIONS, /8 VOLT, -WIRE - NETWORK 4.4-
11 OUTSIDE WALL OF BUILDING SERVICE DROP BY THE COMPANY ONE CONNECTOR PER PHASE TO BE FURNISHED AND INSTALLED BY THE COMPANY MOUNT C.T. CABINET SO THAT -/" CONDUIT CAN BE SECURED TO OUTSIDE WALL OF BUILDING OUTSIDE WALL OF BUILDING SINGLE SET OF CONDUCTORS OR CONNECTION BLOCK BY CUSTOMER (REFER TO FIGURE 47 OF THE METER BOOK FOR DETAILS). ' MAX RISER ATTACHMENT BY THE COMPANY TOP VIEW PARALLEL SERVICE 6" MIN SEE FIGURE FOR CLEARANCE ABOVE ROOF HIGH PHASE TO BE MARKED ORANGE FOR /4V DELTA SERVICE. OMIT BOTTOM C.T. FOR SINGLE PHASE SERVICE. SMALL AERIAL C.T. BOX SUPPLIED BY THE COMPANY AND INSTALLED BY CUSTOMER SO THAT -/" CONDUIT MINIMUM CAN BE SECURED TO OUTSIDE BUILDING WALL. C.T. BOX MINIMUM DIMENSION 8" H X 8-/8" W X 6" D RIGID SCHEDULE 4 -/" CONDUIT MINIMUM SUPPLIED AND INSTALLED BY CUSTOMER. BEND CONDUIT INTO METER SOCKET. DO NOT USE CONDULETS. SECURE WITH CONDUIT STRAPS A MAXIMUM OF ' APART. FINISHED GRADE 4'-" MIN. 5'-6" MAX. NOTE: ALL METER CONTROL WIRE CONNECTIONS TO BE MADE INSIDE CURRENT TRANSFORMER ENCLOSURE. /5/ GUINN GUINN CT CABINET INSTALLATION ON SERVICE RISER, THREE-PHASE, 4-WIRE OR SINGLE-PHASE, -WIRE SERVICE 4.7-8
12 PLAN VIEW CUSTOMER OWNED POLE TO METER FRONT VIEW /5/ GUINN GUINN CURRENT TRANSFORMER INSTALLATION FOR SECONDARY METERING 4.7-
13 WALL MOUNTED SERVICE ATTACHMENT TO BE INSTALLED BY CUSTOMER 5" " 9" CUSTOMER SHALL CONNECT MULTIPLE RISERS BEHIND THE C.T.'S TO A SINGLE SET OF CONDUCTORS OR CONNECTION BLOCK FOR CONNECTION TO THE SERVICE DROP BY THE COMPANY. (REFER TO FIG. 47 OF THE METER BOOK FOR CONNECTION BLOCK DETAILS) 4-/" H X 9-/4" W X -/" D LARGE AERIAL C.T. BOX HIGH PHASE TO BE MARKED ORANGE FOR /4V DELTA SERVICE. COMPANY OWNED CT CUSTOMER OWNED AND INSTALLED CT C.T. METER SOCKET MINIMUM DIMENSION " H X " W X 4-/4" D CT 8" MIN ' MAX ' MAX ' MAX SERVICE DROP AND ONE CONNECTOR PER PHASE TO BE FURNISHED AND INSTALLED BY THE COMPANY 4'-" MIN. 5'-6" MAX. RIGID SCHED. 4 -/" CONDUIT MINIMUM WITH NO CONDULETS. SECURE WITH CONDUIT STRAPS MAXIMUM OF ' APART. FINISHED GRADE METERING EQUIPMENT EXCEPT -/" CONDUIT AND CONDUIT FITTINGS TO BE WIRED BY THE COMPANY AND MOUNTED BY THE CUSTOMER. NOTES:. CUSTOMER MUST PROVIDE ADEQUATE GROUNDING OF FACILITIES IN ACCORDANCE WITH THE N.E.C. AND AUTHORITY HAVING JURISDICTION, AND THE COMPANY.. ALL METER CONTROL WIRE CONNECTIONS TO BE MADE INSIDE CURRENT TRANSFORMER ENCLOSURE. /5/ GUINN GUINN CT CABINET INSTALLATION ON THREE-PHASE, 4-WIRE WALL MOUNTED 4.7-
14 PLAN VIEW LOAD SOURCE 5" 8" MP5F 7" 46" # SD BC # SD BC " FRONT VIEW SIDE VIEW NOTES:. SEE SECTION FOR ADDITIONAL GROUNDING DETAILS. /5/ GUINN GUINN SINGLE-PHASE PRIMARY METERING INSTALLATION - 5 KV OVERHEAD CLUSTER 4.8-4
15 NEUTRAL PLAN VIEW LOAD SOURCE " 8" MP5F 6" 9'-4" # SD BC 96" NEUTRAL METER BOX SYSTEM NEUTRAL TO BE CONNECTED ON COMMON BUS BRACKET FOR INSTALLING METER BOX FURNISHED BY METER DEPT. 4'-" MIN. 5'-6" MAX. FRONT VIEW SIDE VIEW NOTES:. SEE SECTION FOR ADDITIONAL GROUNDING DETAILS. /5/ GUINN GUINN POLYPHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD VERTICAL CLUSTER 4.9-6
16 NEUTRAL KHLC4N6F OR KHLC79F PLAN VIEW LOAD LIFTING EYE SOURCE " 8" 4" MP5F 6" 4" 9'-4" 6" 4" # SD BC 7" NEUTRAL METER BOX SYSTEM NEUTRAL TO BE CONNECTED ON COMMON BUS BRACKET FOR INSTALLING METER BOX FURNISHED BY METER DEPT. 4'-" MIN. 5'-6" MAX. NOTES: FRONT VIEW SIDE VIEW. SEE SECTION FOR ADDITIONAL GROUNDING DETAILS.. LINE FUSES MAY BE PLACED ON POLE UPSTREAM OF METER CLUSTER IF CIRCUIT CONFIGURATION PERMITS AND APPROVED BY PLANNER. /5/ GUINN GUINN THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD VERTICAL CLUSTER 4.9-
17 LOAD SOURCE PLAN VIEW MAKE PRIMARY CONNECTIONS TO C.T. TERMINALS SOURCE LOAD 4" 7" " MP5F " SYSTEM NEUTRAL TO BE CONNECTED ON ON COMMON BUS NEUTRAL FRONT VIEW SIDE VIEW NOTES:. METER DEPARTMENT TO SPECIFY LOCATION FOR USE OF THIRD POTENTIAL TRANSFORMER.. SEE SECTION FOR ADDITIONAL GROUNDING DETAILS. THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, /5/ GUINN GUINN OVERHEAD HORIZONTAL CLUSTER 4.9-
18 5" 4" " 6" GUY ATTACHMENT 4" " 6" 4" 6" 7'-4" 8" 4" " SYSTEM NEUTRAL TO BE CONNECTED TO COMMON BUS. 54" CT'S AND PT'S COMPLETE WITH MOUNTING FURNISHED BY METER DEPT. # SD BC 54" METER BOX AND BRACKET FURNISHED BY METER DEPT. 6" 4" METER BOX 4'-" MIN. 5'-" MAX. FRONT VIEW SIDE VIEW NOTES:. GUYS MUST BE BONDED TO POLE GROUND, NOT SHOWN HERE FOR CLARITY. REFER TO.4-4. THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, 6 AMP, -/ ELEMENT, /5/ GUINN GUINN OVERHEAD HORIZONTAL CLUSTER 4.9-6
19 KHLC4N6F OR KHLC79F 5" 4" A 6" 6" 78" FIBERGLASS LINK 4" " B 4" C 6" 5" " SYSTEM NEUTRAL TO BE CONNECTED TO COMMON BUS. " 54" CT'S AND PT'S COMPLETE WITH MOUNTING FURNISHED BY METER DEPT. METER BOX AND BRACKET FURNISHED BY METER DEPT. 6" METER BOX 4'-" MIN. 5'-6" MAX. FRONT VIEW SIDE VIEW NOTES:. GUYS MUST BE BONDED TO POLE GROUND, NOT SHOWN HERE FOR CLARITY. REFER TO.4-4. /5/ GUINN GUINN THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, AMP, -/ ELEMENT, OVERHEAD HORIZONTAL CLUSTER 4.9-8
20 LOAD SOURCE PLAN VIEW SOURCE LOAD MAKE PRIMARY CONNECTIONS TO C.T. TERMINALS 4" 7" " SYSTEM NEUTRAL TO BE CONNECTED ON ON COMMON BUS MP5F " FRONT VIEW SIDE VIEW NOTES:. METER DEPARTMENT TO SPECIFY LOCATION FOR USE OF THIRD POTENTIAL TRANSFORMER.. CUTOUTS MAY BE INSTALLED ON ADJACENT SERVICE POLE IF SPECIFIED BY ENGINEER.. SEE SECTION FOR ADDITIONAL GROUNDING DETAILS. /5/ GUINN GUINN THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, ELEMENT, OVERHEAD HORIZONTAL CLUSTER 4.9-
21 " 8" 5/8" ANCHOR BOLTS (6) PLACES METERING PT/CT SIDE 56" 4" PRIMARY CABLE SIDE 8-/" 4" " 86" 4" ENCLOSURE FOOTPRINT "ELBOWS" LABEL STAINLESS STEEL CARRIAGE BOLTS EQUIPMENT ID NUMBER WARNING LABEL CN 94 EXTERIOR DURHAM LABEL CATALOG NUMBER AND ELECTRICAL RATING (ON INSIDE OF DOOR) FRONT VIEW MACRO UNIT - CU ITEM NO. COMPATIBLE UNIT QTY REQ'D BILL OF MATERIALS CATALOG NUMBER QTY PER CU DESCRIPTION ENCMTRCTPTSF 466 PAD-MOUNTED METER ENCLOSURE PADP8X87CF 77 8" X 87" CONCRETE PAD - 94 WARNING LABEL DANGER LABEL (SEE NOTE ) NOTES:. ISSUE GROUNDS SEPARATELY.. INSTALL DANGER LABEL ON INSIDE OF EACH DOOR: TOTAL (4) LABELS.. INSTALL WARNING LABEL ON EACH SET OF DOORS (ONE PER SIDE). 7/5/4 DANNA DANNA /5/ GUINN GUINN THREE-PHASE PRIMARY METERING ENCLOSURE FRONT VIEW AND FOOTPRINT DEC DEM DEP DEF X 4.-
22 BØ LINE LABEL BØ LOAD LABEL AØ LINE LABEL AØ LOAD LABEL CØ LINE LABEL CØ LOAD LABEL 5KV 6 AMP BUSHING (6) PLACES PARKING STAND (9) PLACES " 5" 54" /"- THREAD GROUND NUT 8" # SD BC GROUND LOOP 86" (4) 5' GROUND RODS FRONT VIEW (DOORS REMOVED) "CT/PT" LABEL ON EXTERIOR OF DOOR BACK VIEW (DOORS REMOVED) NOTES:. REAR SIDE ACCESS FOR METER DEPARTMENT ONLY.. CONTACT METERING WHEN THERE IS AN APPLICATION FOR THIS ENCLOSURE.. INSTALL ELBOW ARRESTERS ON BACK OF T-BODY. /5/ GUINN GUINN THREE-PHASE PRIMARY METERING ENCLOSURE BUSHING AND CT/PT LAYOUT 4.-
23 NOTES:. DEADFRONT CONSTRUCTION 6 AMP BOLTED ELBOW (T-BODY).. T-BODY IS NON-LOADBREAK (NO VOLTAGE AND CURRENT).. IT IS ACCEPTABLE TO CONNECT BOTH GROUND DRAIN LEADS TO THE GROUNDING BUSS USING SEPARATE CONNECTORS AS A METHOD OF CROSS BONDING. 4. CONNECT DRAIN WIRE FROM INSULATED CAP TO GROUND LOOP. 5. VERIFY LINE AND LOAD SIDE CABLES ARE CONNECTED PROPERLY (I.E. LINE TO LINE, LOAD TO LOAD, CORRECT PHASE). IMPROPER CONNECTION WILL RESULT IN INCORRECT METER READINGS! 6. SEE.6- FOR CABLE AND CONDUIT PLACEMENT. 7. MARK ALL CABLES USING WHITE PLASTIC CABLE IDENTIFICATION TAG. TAG MUST INCLUDE LINE OR LOAD DESIGNATION. SEE 7.- FOR ADDITIONAL DETAIL. /5/ GUINN GUINN THREE-PHASE PRIMARY METERING ENCLOSURE 4.-5
24 KHLC4N6F OR KHLC79F " 8" 6" 5" " SYSTEM NEUTRAL TO BE CONNECTED TO COMMON BUS. 54" CT'S AND PT'S COMPLETE WITH MOUNTING FURNISHED BY METER DEPT. METER BOX AND BRACKET FURNISHED BY METER DEPT. 6" METER BOX 4'-" MIN. 5'-6" MAX. FRONT VIEW SIDE VIEW NOTES:. SEE SECTION FOR ADDITIONAL GROUNDING DETAILS. /5/ GUINN GUINN THREE-PHASE PRIMARY METERING INSTALLATION - 5 KV, -/ ELEMENT, OVERHEAD HORIZONTAL CLUSTER (FMO) 4.9-4
AMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
More information10 Commercial, Industrial, Agricultural Services
10 Commercial, Industrial, Agricultural Services This section describes the Power Company requirements for commercial, industrial, and agricultural services. This section covers single phase and three
More informationAGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS
Prepared by: ABB1 AGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS 05619 Asset Type: Electric Metering Function: Design and Construction Issued by: Lisseth Villareal (LDV2) Date: 07-31-15 Rev. #10: This
More informationD9-3. No. WIRING DIAGRAM CONNECTIONS FOR UNDERGROUND SELF CONTAINED METERS JRH JED krich95 LINE LINE ABCN SOURCE SOURCE GROUND GROUND STUD STUD SOURCE
SOURCE 20V 240V STUD (PER NEC) A customer supplied and installed teaser wire is required from the neutral lug to a 5th terminal mounted on the left side of the meter block between the line and load terminals.
More information9. Non-Residential Services (Commercial, Industrial, and Agricultural)
Section 9 2016 Electric Service Requirements, 3rd Edition Section 9 Non-Residential Services Directory Page 9.1 General Requirements 68 9.2 Direct-Connect Metering, Single Installations 69 9.3 Direct-Connect
More informationEngineering Service Specifications. Commercial Single-Phase Current Transformer Metering Schemes
Engineering Service Specifications Commercial Single-Phase Current Transformer Metering Schemes Specifications for Commercial Underground Current Transformer Metering Requirements for a Single-Phase Customer
More informationENTRANCE EQUIPMENT ER D PAGE 1 OF 5
PAGE 1 OF 5 USE: Requirements for entrance equipment. PREVIOUS REVISION 07-01-98 ORIGINATED 03-94 PREVIOUS NUMBER ER 100 (12-01-81) LATEST REVISION: Updated meter socket labeling specification and instrument
More informationApproved Contractor Construction e-guide Residential Commercial
Approved Contractor Construction e-guide Residential Commercial Clark Public Utilities PO Box 8900 Vancouver, WA 98668 (PAGE 2) TABLE OF CONTENTS PAGE Trenching 3 Wire 8 Single-Phase Transformer Set 13
More informationPUBLIC UTILITY DISTRICT NO. 1 OF LEWIS COUNTY METERING SPECIFICATIONS
PUBLIC UTILITY DISTRICT NO. 1 OF LEWIS COUNTY METERING SPECIFICATIONS 1. General Metering Requirements a. Interpretation The District s metering requirements shall not be interpreted to conflict with the
More informationSECTION 500 METERING AND ASSOCIATED EQUIPMENT
SECTION 500 METERING AND ASSOCIATED EQUIPMENT 500.0 General Meter sockets shall be provided, installed and maintained by Customer. When the ratings of meter sockets are exceeded, transockets shall be used.
More informationSECTION 27 - PAD-MOUNTED TRANSFORMERS TABLE OF CONTENTS
CABLE AND CONDUIT ENTRANCE SINGLE-PHASE PAD-MOUNTED TRANSFORMER INSTALLATION 100 KVA AND LARGER (CONCRETE PADS ONLY) 27.05-01 CABLE AND CONDUIT ENTRANCE SINGLE-PHASE PAD-MOUNTED TRANSFORMER INSTALLATION
More informationSECTION 300 OVERHEAD SERVICE
SECTION 300 OVERHEAD SERVICE 300.01 General Company provides, installs, and maintains service drop to point of delivery approved by Company. Customer provides point of attachment which is acceptable to
More informationMetering and Service Installation:
Table of Contents 1. Metering Installation Requirements, General... 1 2. Type of Service... 2 3. Definitions... 2 4. Who Provides Metering Equipment?... 2 5. Establishment of Service... 2 6. Meter Access...
More informationCommercial Electric Policy
Commercial Electric Policy 7/19/16 1 Table of Contents General Information..3 Construction.3 Ownership.4 Multi-Unit/Multi-Service Buildings....4 Secondary Termination Enclosures.4 Meter Bases.5 Temporary
More informationELECTRIC SERVICE RULES DISTRIBUTED GENERATION Issued Jan 2016
DISTRIBUTED GENERATION CHAPTER 5 500. SCOPE This chapter includes distributed or customer-owned generation connected in parallel and operating with Alliant Energy s electric distribution system. For all
More informationRevised: April 2018 ¹ SERVICE TO WIRELESS DEVICE ANTENNA ATTACHMENTS ON CUSTOMER SERVICE POLES (SHEET 1) CUSTOMER: 1. An overcurrent protective device including a disconnect switch shall
More informationSTOUGHTON UTILITIES ELECTRIC SERVICE RULES AND INFORMATION
CHAPTER 1 - GENERAL INFORMATION 100. Purpose 101. Codes and rules 102. Continuity of service 103. Frequency, Voltage, and Amperage Limitations 104. High voltages 105. Unusual capacity requirements 106.
More informationApproved Meter Sockets and Cabinets
Single Unit Residential Guide 1 PHASE, 120/240 VOLT SERVICES SERVICE CAPACITY OWNED METERING (Metering sockets and cabinets are supplied by Customer). Outdoor meter mounting height is 1730 mm ( 5 8 ) to
More informationElectric Service Standards
VI - 1 of 17 VI. METERING EQUIPMENT A. Equipment Furnished and Installed by FPL FPL provides and installs, at its expense, adequate metering instruments to measure the electric service used by the Customer.
More informationCustomer Requirements Meter Socket Configurations
Application Information on meter socket configurations available from Tacoma Power. For enclosed meter pedestals, see standard C-MR-0020 Customer Requirements, Enclosed Meter Pedestal. General Requirements
More informationSOUTHWEST LOUISIANA ELECTRIC MEMBERSHIP COORPORATION COMMERCIAL SERVICE REQUIREMENTS
SOUTHWEST LOUISIANA ELECTRIC MEMBERSHIP COORPORATION COMMERCIAL SERVICE REQUIREMENTS November 17, 2016 Engineering Service Specifications Table of Contents Commercial Service Requirements SLEMCO Commercial
More informationClark Public Utilities Commercial Electric Service Handbook. This page left blank intentionally.
This page left blank intentionally. 38 Chapter 4: Commercial Metering / January 2011 APPENDIX Glossary Approval Acceptable to the authority having jurisdiction. Associated equipment As related to metering
More informationPentahead bolts See note 2. Conduit run as specified. Company facility. Refer to drawing SS8.6-2 or SS8.6-3 STANDARD SERVICE INSTALLATION
PULL BOX F SECONDARY SYSTEM Typical grade Pentahead bolts See note 2 Conduit run as specified Plastic or fiberglass for grass areas or Polymer concrete for light duty areas (see notes 2, 3, & 4) Company
More informationSECTION 8 - SWITCHES AND PROTECTIVE DEVICES TABLE OF CONTENTS
08.00 GENERAL DISTRIBUTION SURGE ARRESTERS 08.00-0 CUTOUTS AND ARRESTERS GENERAL 08.00-03 08.0 CUTOUTS AND ARRESTERS METAL OXIDE ARRESTERS WITH POLYMER HOUSINGS 08.0-0 APPLICATION OF DIRECT CONNECTED ARRESTERS
More information7. Residential Single-Family and Duplex Buildings (Dwellings)
Sin g le -F a mily a n d Du p le x Bu ild in g s 2016 Electric Service Requirements, 2 nd Edition Section 7 Section 7 Residential Single-Family and Duplex Buildings (Dwellings) Directory Page 7.1 General
More information7 Single Family Service
7 Single Family Service 7. General The location of the service entrance on the Customer s premises is an important consideration. For clearance and location information see section 5 (Clearances). Consult
More informationService Requirements
Service Requirements General Contact Idaho Power before beginning work on any new service. All meter installations must meet current electrical code requirements and display the proper electrical permit.
More informationMETERING REQUIREMENTS
METERING REQUIREMENTS KUA will not accept a non-securable service trough entrance. That is, all enclosed conductors prior to the meter (line side) will be securable by and accessible to KUA personnel only.
More informationFor Conduit Inspections
Underground Conduit Standards - Table of Content 5/8/2017 Section S22 Underground Conduit Standard Index: Description: 00 Table of Content 01 General Notes 02 Definition of Terms 03 Primary Riser Conduit
More informationSection 6 Electric Metering: Residential
Section 6 Electric Metering: Residential 6.1. Scope This section provides specific information for residential metering that is not covered by the basic requirements in Section 5, Electric Metering: General.
More informationSECTION VII METERING INSTALLATIONS
SECTION VII METERING INSTALLATIONS 1. GENERAL Outdoor metering is required for all new service installations to one, two, and three family detached, semi-detached and row houses. 2. COMPANY FURNISHES AND
More informationSECTION 3 - PRIMARY CONSTRUCTION OVERHEAD TABLE OF CONTENTS
03.00 GENERAL CONSTRUCTION NOTES PRIMARY CONSTRUCTION PRIMARY CONSTRUCTION PIN INSULATOR INSTALLATION 03.00-02 03.00-04 03.00-20 03.02 CONNECTORS AUTOMATIC SPLICE INSTALLATION 03.02-01 INSTALLATION GUIDE
More informationNEW SERVICE HANDBOOK COMMERCIAL & IRRIGATION SUPPLEMENT
NEW SERVICE HANDBOOK COMMERCIAL & IRRIGATION SUPPLEMENT Meter Installations There are three basic ways to measure electricity consumption: Small and medium services are metered directly using direct connect
More informationUNDERGROUND SERVICES - SECONDARY
UNDERGROUND SERVICES - SECONDARY Contents - Underground Services... U-1 General Requirements for Underground Service...U-2 Names of Parts for Underground Service... U-3 Service Termination in a Service
More informationCOMMERCIAL QUICK REFERENCE
COMMERCIAL QUICK REFERENCE PROVO CITY POWER STANDARDS ELECTRICAL ENGINEERING UPDATED: 2016 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION. 18" MIN. OF TAIL. (NEUTRAL CONDUCTOR MUST BE WHITE OR
More informationSPECIFICATIONS FOR RESIDENTIAL CONSTRUCTION
Roseville Electric SPECIFICATIONS FOR RESIDENTIAL CONSTRUCTION REVISED 04/25/18 Specifications for Residential Construction Revision List REVISION Date Page No. Description 03/20/00 6.1-6.2 Added Armorcast
More informationCONTENTS BY CHAPTER. Chapter 2: COMPANY EQUIPMENT ON CUSTOMER PREMISES
CONTENTS BY CHAPTER Chapter 1: GENERAL INFORMATION Chapter 2: COMPANY EQUIPMENT ON CUSTOMER PREMISES Chapter 3: SERVICE ENTRANCES Chapter 4: METERING INSTALLATION Chapter 5: CUSTOMER-INSTALLED SERVICE
More informationWPS SERVICE MANUAL. Section Amp and Smaller - Common
Revised 01/2017 Section 2 200 AMP AND SMALLER - COMMON Page 1 of 17 Section 2 200 Amp and Smaller - Common 2-0 General Metering Requirements... 2 2-1 Basic Calculations... 4 2-2 100-200 Amp Single-Phase
More informationSERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
More information10. METERING General Requirements
10. METERING 10.1 General Requirements A. The Company will not supply service to a Customer whose wiring is designed for resale of electricity through submetering except for recreational campgrounds, marinas,
More informationCONSTRUCTION STANDARD ELECTRIC OPERATIONS ORGANIZATION
Page 1 of 11 R1 ****This Standard Supercedes CE Macros MPR1S, MUR1S, MPR3S & MUR3S and portions of BECo Standards CS2.7-1.1, CS2.7-1.5 & CS2.7-1.7**** PRIMARY URD RISER CONSTRUCTION TABLE OF CONTENTS Page
More informationELECTRIC SERVICE RULES UTILITY/CATV SERVICES Issued Jan 2016
UTILITY/CATV SERVICES CHAPTER 9 900. GENERAL A. Alliant Energy receives many requests for electric service from other utilities; telephone, telecommunications companies, cable television, the Department
More informationCustomer Requirements Downtown Secondary Network Service
Application This standard describes the limitations and requirements for receiving service from the Tacoma Power secondary network system within the City of Tacoma downtown core area. In This Standard
More informationSPECIFICATIONS FOR RESIDENTIAL CONSTRUCTION
Roseville Electric SPECIFICATIONS FOR RESIDENTIAL CONSTRUCTION REVISED 10/03/17 Specifications for Residential Construction Revision List REVISION Date Page No. Description 8/18/09 T.O.C., 8.1-8.1.5 &
More information2. DEFINITIONS. 2.3 APPROVED Acceptable to the authority enforcing the National Electric Code
2. DEFINITIONS 2.1 ACCEPTABLE Acceptable to the Company. 2.2 ADVANCED METER A meter that is capable of remote reading, and is capable of storing electric consumption data at specified time intervals of
More informationService Requirements
Service Requirements General Contact Idaho Power before beginning work on any new service. All meter installations must meet current electrical code requirements and display the proper electrical permit.
More informationSAFETY SOCKET BOX. Note 8 3" MIN. 3" Max. (200 A)
.&. SAFETY SOCKET BOX USE: 1 12/24V 1A & 2A 4 Terminal EUSERC Dwg. No's 34 & 35 (With Factory Installed Test-Bypass Facilities) Refer to SR-452 for the complete Front View Lower-Panel Removed Note 3 3"
More informationPEU reserves the right to determine all meter locations. Only authorized PEU personnel will determine this location.
I N T R O D U C T I O N - M-1 RIGHTS: PEU reserves the right to determine all meter locations. Only authorized PEU personnel will determine this location. NOTIFICATION: Customers planning to install or
More informationELECTRIC DIVISION RULES AND PROCEDURES FOR ELECTRIC SERVICE
Public Works and Utilities 1250 N. Highland St. Mount Dora, FL 32757 352-735-7151 ext. 1805 Fax: 352-735-1539 E-mail: publicworks@cityofmountdora.com ELECTRIC DIVISION RULES AND PROCEDURES FOR ELECTRIC
More informationNew Service. From... BARRON. Spooner Office: P.O. Box 261 Spooner, WI Barron Office: P.O. Box 40 Barron, WI
New Service Guidelines and Diagrams From... BARRON www.barronelectric.com email: janderson@barronelectric.com Barron Office: P.O. Box 40 Barron, WI 54812-0040 Spooner Office: P.O. Box 261 Spooner, WI 54801-0261
More information320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
More informationSALEM CITY POWER ELECTRICAL REQUIREMENTS & STANDARDS MANUAL
SALEM CITY POWER DEPARTMENT TABLE OF CONTENTS Section 1 General Requirements Purpose...1.1 Codes and Ordinances...1.1 Changes or Conflicts in Requirements and Guidelines...1.1 Application for Service...1.2
More informationIndianapolis Power & Light Company
Indianapolis Power & Light Company Electric Service and Meter Manual The Electric Service & Meter Manual is not copyrighted and permission is hereby given to reproduce this document. However, the Indianapolis
More informationElectric Service and Meter Installa on Requirements
Electric Service and Meter Installa on Requirements OUC Electric Meter Voltage Class Service Wires OUC Meter/Badge Number Meter Serial Number For Your Information Please send revision suggestions to: OUC
More informationCommercial & Industrial
The Empire District Electric Company Requirements For Electric Service And Meter Installations Commercial & Industrial (800) 206 2300 The latest revision of this book can be found at www.empiredistrict.com
More informationGENERAL INFORMATION 1.01 PURPOSE
GENERAL INFORMATION 1.01 PURPOSE The purpose of this manual is to supply essential information to customers, employees, architects, engineers, contractors, and others concerned with electrical installations
More informationMINIMUM DISTRIBUTION SYSTEM CONCEPTS AND APPLICATIONS. Larry Vogt. Manager, Rates
MINIMUM DISTRIBUTION SYSTEM CONCEPTS AND APPLICATIONS Larry Vogt Manager, Rates Minimum Distribution System What is MDS? MDS is an analysis module of the cost-of-service study in which distribution investment
More informationTABLE OF CONTENTS. Important Notices Underground Plant Protection Information. Commercial/Industrial Information Sheet
DRAWING NUMBER INTRODUCTORY INFORMATION Important Notices Underground Plant Protection Information Code Clearances Commercial/Industrial Information Sheet Work Management Customer Projects Engineering
More informationElectric Service Requirements & Guidelines
Electric Service Requirements & Guidelines Montana Service Area September 2011 NORTHWESTERN ENERGY Montana Service Area ELECTRIC SERVICE REQUIREMENTS AND GUIDELINES CONTENTS I. GENERAL INFORMATION 1.01
More informationSERVICE ENTRANCE - UNDERGROUND Single & Three Phase 200, & 320/400 Amp
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: Arrangement of service equipment to supply electric energy to an underground, outdoor self contained meter installation. LATEST REVISION: PREVIOUS REVISION
More informationWisconsin Public Utility Institute. June 28, Minimum Distribution Charges. Larry Vogt. Director, Rates Mississippi Power
Wisconsin Public Utility Institute June 28, 2017 Minimum Distribution Charges Larry Vogt Director, Rates Mississippi Power 1 Costs of Service vs. Cost Recovery Residential Service Example Assuming that
More informationELECTRIC SERVICE MANUAL
ELECTRIC SERVICE MANUAL Issued: November 2018 For the most current version of the Jo-Carroll Energy electric service manual please visit www.jocarroll.com TABLE OF CONTENTS Chapter 1. General Information...1
More informationMeter Standards COMMERCIAL. Metering Guidelines for Electric Service. March 28, 2014
Meter Standards COMMERCIAL Metering Guidelines for Electric Service March 28, 2014 13315 Goodnough Drive NW Gig Harbor WA 98332-8640 Phone (253) 857-1547 Fax (253) 857-1557 www.penlight.org Commercial
More information2016 METER SERVICES SPECIFICATION GUIDE
2016 METER SERVICES SPECIFICATION GUIDE 802.01.ST (10-16) CONTENTS Introduction 2 Disclaimers 2 LES contacts 3 Definitions 4 LES Meter Services department requirements for approval of connection to LES
More informationELECTRICAL METERING RESIDENTIAL
ELECTRICAL METERING RESIDENTIAL 1.0 INDEX 1.0 INDEX 2.0 SCOPE 3.0 GENERAL REQUIREMENTS 4.0 UNDERGROUND FED METER SOCKET (226-320 AMPS) 5.0 METER SOCKET (0-320 AMPS, 120/208V) 6.0 UNDERGROUND SERVICE W/CURRENT
More informationRESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS SECTION VI RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS
SECTION VI SERVICE REQUIREMENTS This section discusses the requirements for establishing electric service to new residential subdivisions in Palo Alto. Subdivisions are normally constructed on dedicated
More informationSINGLE PHASE WIRING SPECIFICATIONS
SINGLE PHASE WIRING SPECIFICATIONS 1-866-MEC-ELEC (1-866-632-3532) Office Locations: Hondo Office 237 Hwy 173 N Hondo, TX 78661-0370 Fax 830.426.3335 Dilley Office 1718 W. FM 117 Dilley, TX 78017 Fax 830.965.1425
More informationUNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
More informationTHREE PHASE WIRING SPECIFICATIONS
THREE PHASE WIRING SPECIFICATIONS 1-866-MEC-ELEC (1-866-632-3532) Office Locations: Hondo Office 237 Hwy 173 N Hondo, TX 78661-0370 Fax 830.426.3335 Dilley Office 1718 W. FM 117 Dilley, TX 78017 Fax 830.965.1425
More informationGenerator Fire Safety: Generator assemblies should be located outside the building.
SECTION 33 70 00 - ELECTRICAL DISTRIBUTION PACKAGED GENERATOR ASSEMBLIES Generator Fire Safety: Generator assemblies should be located outside the building. All fuel piping from the outside of the building
More informationSYSTEM PROTECTION SYSTEM PROTECTION. Underground Electric Distribution Standards I. FUSE COORDINATION
I. FUSE COORDINATION I.1. GENERAL I.1.1. The purpose of protective coordination is to provide isolation of a fault as close to the fault as possible so that a minimum of customers will be affected. The
More informationUNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
More informationOVERHEAD SERVICE. Items to consider
OVERHEAD SERVICE Items to consider The maximum length of the service wire from the ComEd pole to the point of attachment on your residence is 150 feet, if practical. Your service wire installation must
More information2018 Consultant s Handbook Division 26 Electrical 2413 Switchboards
1 General 1.1 Switchboards shall be U.L. listed and labeled. 1.2 Each switchboard shall have its own main disconnecting means unless it is located in the same room as its source of origin. In most cases
More informationTransmission & Distribution Glossary of Electrical Terms
Transmission & Distribution Glossary of Electrical s Breaker Panel Bushing Circuit Circuit Breaker Conductor Conduit Consumption Current Distribution Electricity (Static vs. Current) Electron Feeder The
More informationElectric Service Rules
2017 Electric Service Rules GENERAL INFORMATION TEMPORARY SERVICES OVERHEAD SERVICES UNDERGROUND SERVICES DISTRIBUTED GENERATION METERING HUD MANUFACTURED HOMES FARM SERVICES UTILITY/CATV SERVICES PRIMARY
More informationService Entrance Methods
Service Section Typical switchboards consist of a service section, also referred to as the main section, and one or more distribution sections. The service section can be fed directly from the utility
More information9/16/2010. Chapter , The McGraw-Hill Companies, Inc. TRANSMISSION SYSTEMS. 2010, The McGraw-Hill Companies, Inc.
Chapter 3 TRANSMISSION SYSTEMS 1 Transmitting large amounts of electric energy over long distances is accomplished most efficiently by using high-voltages. Without transformers the widespread distribution
More informationFlorham Park, NJ USA Call (ASCO) for sales or service
Operator s Manual 7000 Series ATS Automatic Transfer Switches D design, 30 through 230 A DANGER is used in this manual to warn of a hazard situation which, if not avoided, will result in death or serious
More informationTable of Contents. Electrical Service Requirements. 1. General Requirements
Table of Contents 1. General Requirements 1.1 General Definition.................................................... 1 1 1.2 Booklet Purpose and Organization....................................... 1-1
More informationUNDERGROUND SERVICE. Items to consider. There will be charges from ComEd if you convert from overhead to underground service.
UNDERGROUND SERVCE tems to consider f your trenching route has to be dug by hand, or if a cable must be installed under a paved surface, additional charges apply. f your service cable has to be moved later
More informationInstalling or Rebuilding Your Electric Service
Installing or Rebuilding Your Electric Service 2 3 Contents Policies for New and Rebuilt Electric Service 2-4 Paperwork and fees...2 Five-year policy...3 Proposed route location and conditions...3 Construction
More informationSPRINGVILLE CITY ELECTRICAL REQUIREMENTS & STANDARDS MANUAL
POWER DEPARTMENT EFFECTIVE AS OF FEBRUARY 1, 2008, REVISED JULY 1, 2013 STANDARDS ARE SUBJECT TO REVIEW TABLE OF CONTENTS Section 1 General Requirements Purpose...1.1 Codes and Ordinances...1.1 Changes
More informationSECTION 1: Field Inspection Guide for Rooftop Photovoltaic (PV) Systems
COUNTY OF SANTA CRUZ PLANNING DEPARTMENT 701 OCEAN STREET, 4 th FLOOR, SANTA CRUZ, CA 95060 (831) 454-2580 FAX: (831) 454-2131 TDD: (831) 454-2123 KATHLEEN MOLLOY PREVISICH, PLANNING DIRECTOR Photovoltaic
More informationElectric & Gas Service Requirements (Greenbook) Overview
INTRODUCTION The Greenbook contents and standard documents are updated regularly to provide users with the most current information possible. In conjunction with this effort, the 2016 Greenbook was reviewed
More informationBrantford Power Inc. METERING SPECIFICATION Page 1
Brantford Power Inc. METERING SPECIFICATION Page 1 BRANTFORD POWER INC. CONTACT NUMBERS... 1 SCOPE OF METERING SPECIFICATION... 2 GENERAL REQUIREMENTS FOR INSTALLATIONS... 2 METER SOCKET REQUIREMENTS LOAD
More informationBrantford Power Inc. METERING SPECIFICATION Page 1
Brantford Power Inc. METERING SPECIFICATION Page 1 BRANTFORD POWER INC. CONTACT NUMBERS... 1 SCOPE OF METERING SPECIFICATION... 2 METER SOCKET REQUIREMENTS LOAD METERS... 2 120/240V, single phase loads,
More informationMeter Installation. -and- Padmount Transformer Guide
Meter Installation -and- Padmount Transformer Guide Feb. 2016 METERING REQUIREMENTS The following information shall be used as a guide for installing metering equipment. A self-contained meter has all
More informationEngineering Rules and Regulations for Electric Service Platte-Clay Electric Cooperative, Inc.
Engineering Rules and Regulations for Electric Service Platte-Clay Electric Cooperative, Inc. December 2016 (Expires 9/30/18) Kearney Cooperate Headquarters 1000 W. 92 Highway Kearney, MO Platte City District
More informationElectric Service Requirements
Electric Service Requirements Section V Commercial Industrial July 2007 ENGINEERING SPECIFICATION 620 S Street, P.O. Box 5830, Sacramento, CA 95852-830 The Power To Do More ṢM SM A registered service mark
More informationRESIDENTIAL UNDERGROUND AND OVERHEAD SERVICE REQUIREMENTS SECTION II RESIDENTIAL UNDERGROUND AND OVERHEAD SERVICE REQUIREMENTS
SECTION II This section discusses the City of Palo Alto's requirements for establishing electric service to new or upgraded residential installations. The same requirements apply to both underground and
More informationTEMPORARY ELECTRIC WIRING FOR CARNIVALS, CONVENTIONS, EXHIBITIONS, FAIRS AND SIMILAR USES
INFORMATION BULLETIN / PUBLIC - ELECTRICAL CODE REFERENCE NO.: LAMC 93.0230 Effective: 3-24-69 DOCUMENT NO. P/EC 2002-006 Revised: 11-17-00 Previously Issued As: RGA #7-69 TEMPORARY ELECTRIC WIRING FOR
More informationDigitrip Retrofit System for ITE K-3000, K-3000 S, K-4000 and K-4000 S Breakers
Supersedes IL 33-858-4 Dated 05/02 Digitrip Retrofit System for ITE K-3000, K-3000 S, K-4000 and K-4000 S Breakers Digitrip Retrofit System for ITE K-3000, Digitrip Retrofit System for ITE K-3000, K-3000
More informationIndex Section 103 Joint Use. General Requirements for Installation of Attachments on Oncor Poles
103 09-17 103 Index Section 103 Joint Use Title Date Number General Requirements for Installation of Attachments on Oncor Poles... 103-100 Supply and Communication Space... 103-105 Communication Lines
More information35-kV Safefront 200 Amp SuperWell Primary Metering Station Pad-Mounted Outdoor
35-kV Safefront 2 Amp SuperWell 5-33 Page 1 216 EPM-PMS-35-311P-R2/ESW Three Phase Two Ways per Phase 2 Amp 35 kv Class Eaton's CPS LRTPs NEMA Standard Outdoor Instrument Transformer Provisions 21.1/36.6
More informationA. Submit manufacturer's literature and technical data before starting work.
SECTION 16425 SWITCHBOARD PART 1 GENERAL 1.01 SUMMARY A. Related Section: 1. 16450 - Grounding. 1.02 SUBMITTALS A. Submit manufacturer's literature and technical data before starting work. B. Submit Shop
More informationRequirements for Secondary Voltage Revenue Metering (750 V and less)
Requirements for Secondary Voltage Revenue Metering (750 V and less) To view the latest revision of this document go to: http://www.bchydro.com/ext/metering/ January 28, 2010 Copyright 2008 by BC Hydro.
More informationOREGON TRAIL ELECTRIC CO-OP ELECTRIC SERVICE REQUIREMENTS & GUIDELINES
10/12/2016 ARTICLE OREGON TRAIL ELECTRIC CO-OP ELECTRIC SERVICE REQUIREMENTS & GUIDELINES TABLE OF CONTENTS LOCATION OF OTEC OFFICES... IV OTEC SERVICE AREA... V SECTION I GENERAL INFORMATION 1.1 PURPOSE...
More informationMATERIAL STANDARD ELECTRIC OPERATIONS ORGANIZATION. ****Supercedes BECo Standard E and ComElectric Spec ****
Page 1 of 8 ****Supercedes BECo Standard E2.12-2.14 and ComElectric Spec 7-0895**** THREE-PHASE DEADFRONT PAD-MOUNTED DISTRIBUTION TRANSFORMERS, LOOP & RADIAL FEED DESIGNS 1.0 General Requirements 1.1
More informationFlorham Park, NJ USA Call (ASCO) for sales or service
Operator s Manual 4000 Series ATS Automatic Open-Transition Transfer Switches D design 30 230A, J design 260 600A, H-design 800 1200A, G-design 1600 4000A, F-design 4000A DANGER is used in this manual
More information