Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Size: px
Start display at page:

Download "Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK"

Transcription

1 2 ine Trees, Chertsey Lane, taines-upon-thames, TW18 3HR, UK Millbrook roving Ground Ltd Aston Way Leyland reston Lancashire R26 7TZ Contact: Ms tephanie Nixon Tel: +44 (0) Fax: +44 (0) Website: Laboratory locations: below s covered by the organisation and their relevant activities details Activity code Address Aston Way Leyland reston Lancashire R26 7TZ Local contact Mr Kevin Gough Tel: +44 (0) Fax: +44 (0) kevin.gough@millbrook.co.uk Environmental Testing Vehicle ystems tructural Testing eat erformance Noise, Vibration and Harshness (NVH) Materials Testing (ermanent Laboratory) ite activities performed away from the locations listed above: details Activity code Vehicle proving grounds, and customer test track facilities Vehicle ystems Noise, Vibration and Harshness (ite Facilities) Assessment Manager: A1 age 1 of 13

2 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd DETAIL OF ACCREDITATION Materials/roducts tested Type of test/roperties AEROACE COMONENT, EQUIMENT, MATERIAL AND TRUCTURE ENVIRONMENTAL TET (non-explosive items) CLIMATIC ingle arameters AGRICULTURAL EQUIMENT HIGH TEMERATURE B EN :2007 (Constant and cyclic) GM pecification GMW COMUTER & Clause 4.10 ERIHERAL Max temp: C GM pecification GMW Max chamber size: Clause CONTRUCTION LANT 3 m x 4 m x 6 m AND EQUIMENT LOW TEMERATURE B EN :2007 ELECTRICAL CABLE (Constant and cyclic) GM pecification GMW14109 Excluding ELECTRICAL/ELECTRONIC RODUCT AND COMONENT Min temp: - 40 C Max chamber size: 3 m x 4 m x 6 m ELECTRO-MECHANICAL TEMERATURE CHANGE B EN :2009 DEVICE (Thermal hock) (Manual HYDRAULIC EQUIMENT Transference Only) AND FITTING Max temp: C INTRUMENT: Min temp: - 40 C INDICATING/RECORDING Limiting chamber size: 1.0 m x 1.0 m x 1.0 m MARINE EQUIMENT MINING LANT AND HIGH HUMIDITY B EN :2002 EQUIMENT (teady tate) IEC :2001 MOTOR VEHICLE MOTOR: ELECTRICAL AND HYDRAULIC LATIC AND RODUCT Temp range: + 25 C to + 55 C Humidity range: 20 % to 98 % rh Max chamber size: 3 m x 4 m x 6 m RINTED CIRCUIT BOARD TRUCTURE, COMONENT AND FITTING Assessment Manager: A1 age 2 of 13

3 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties Continued from age 2 ENVIRONMENTAL TET (non-explosive items) (cont d) TELECOMMUNICATION EQUIMENT HIGH HUMIDITY B EN :2005 (Cyclic) GM pecification GMW Clause Temp range: + 25 C to + 55 C Humidity range: 20% to 98% rh Max chamber size: 3 m x 4 m x 6 m AMLE DEFORMATION GOM Tritop hotogrammetric evaluation INGRE ROTECTION rocedure EA018 DUT B EN 60529:1992+A2:2013 Max chamber size: 1.0 m x 1.0 m x 1.0 m I5X Dust protected I6X Dust protected WATER B EN 60529:1992 +A2:2013 IX3 rotected against spraying water IX4 rotected against splashing water IX5 rotected against water jets IX6 rotected against heavy seas IX7 rotected against the effects of immersion IX8 rotected against submersion Assessment Manager: A1 age 3 of 13

4 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties As listed on ages 2 & 3 MATERIAL TETING INTERNAL MATERIAL - AUTOMOTIVE, AEROACE, RAIL, MARINE, etc FLAMMABILITY olymeric Interior Materials Horizontal Test Method rocedure TC based on the following; AE J 369:May 2003 Rev IO 3795:1989 B AU 169a:1992 GM pecification GMW 3232 FMV 302:1991 NE M0094:2008 GO 98/1988 VW TL Chinese GB CROCKING TETING Greyscale evaluation against either IO105-A02 or AATCC scales rocedure TC based on IO 105 X12:2016 CRATCH REITANCE rocedure TC based on Ford FLTM BN Visual Examination Only TABER ABRAION rocedure TC based on Ford FLTM BN , ATM D and AE J948 CUFFING REITANCE rocedure TC based on Ford FLTM BN AE J365:2004 AINT ADHEION rocedure TC based on Ford FLTM BI Excluding Method A Assessment Manager: A1 age 4 of 13

5 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties MATERIAL TETING (cont d) COATED ART, FATENER, BODY & WHITE ECTION ALT RAY TETING Max chamber size: 0.6m x 1.0m x 1.3m ATM B DIN :1988 IO 9227:2012 T JLR Issue 01 Temp Range : 25 C to 45 C TRIM ECTION TENILE TETING 180 eel Adhesion trength Test Tension loads up to 5kN rocedure TC based on Ford FLTM BN VEHICLE YTEM TET VEHICLE IN EEC & ECE CATEGORIE M1, M2, M3, N1, N2, N3 O1, O2, O3, O4 AUTOMOTIVE BRAKE DEVICE AND BRAKING YTEM (Type approval testing) Utilising test track circuit and AC dynamometer EC DIRECTIVE - 71/320/EEC as last amended by /78/EC, excepting Annex VII, Appendix I, art 3.2 Annex XII Annex XV Appendix 2, art 2.2 ECE REGULATION excepting Annex 11, Appendix 2, art 3.2 Annex 12 Annex 15 ECE REGULATION (to Draft upplement 3) Annex XIII (AB) Assessment Manager: A1 age 5 of 13

6 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties VEHICLE YTEM TET (cont d) VEHICLE IN EEC & ECE CATEGORIE M1, M2, M3, N1, N2, N3 O1, O2, O3, O4 (cont d) Automatic Braking ystem (AB) test only EEC Directives - 71/320/EEC Annex X (AB) /78/EEC (Consolidated Braking Directive, Annex X (AB) RELACEMENT BRAKE LINING AEMBLIE ECE REGULATION 90 Annex 3 (M1, M2, N1 vehicles) VEHICLE WITH AIRBRAKE YTEM FMV 121 (UA) (excluding FMV 121D) CMV 121 (Canada) LIGHT VEHICLE BRAKING YTEM FMV 135 (UA) TEERING EQUIMENT ERFORMANCE (Motor Vehicles & Trailers) EEC DIRECTIVE - 70/311/EEC as last amended by /7/EC EEC DIRECTIVE - 75/321/EEC as last amended by - 98/39/EC ECE REGULATION 79 MAE AND DIMENION EEC DIRECTIVE - 97/27/EC as last amended by /85/EC, Assessment Manager: A1 age 6 of 13

7 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties AEROACE TRUCTURAL TET COMONENT, EQUIMENT, MATERIAL TATIC TET AND TRUCTURE tatic/low Frequency AGRICULTURAL (urpose Built Reaction frames) rocedures (as agreed with EQUIMENT Ambient or high/low customers) temperatures using either COATED ART, standard or pre-fabricated FATENER chambers BODY IN WHITE ECTION Max specimen size: 20 m x 5 m x 5 m (L x W x H) CONTRUCTION LANT Max ingle Force: 250 kn AND EQUIMENT (Hydraulic actuators) Max Temp: 120 C ELECTRICAL/ELECTRONIC Min Temp: - 40 C RODUCT AND THEIR COMONENT roperties measured: Displacement, Mechanical INTRUMENT: INDICATING train, Acceleration, ressure, AND RECORDING Force MARINE EQUIMENT FATIGUE TET (MECHANICAL) MINING LANT & EQUIMENT inusoidal, Random, ynthesised and Road Load rocedures (as agreed with MOTOR VEHICLE Data customers) urpose Built Reaction Frame TRUCTURE, Max specimen size: COMONENT & FITTING 20 m x 5 m x 5 m (L x W x H) Max Force: 200 kn TRIM ECTION Max Freq: 50 Hz (force/stiffness dependent) VEHICLE IN EEC & ECE CATEGORIE M1, M2, M3 ENDURANCE TET N1, N2, N3 (MECHANICAL) O1, O2, O3, O4 urpose Built Rigs Utilising neumatic/hydraulic/electric rocedures (as agreed with Actuators customers) Measurement of: Force (tatic and Dynamic), Displacement, train, Frequency Cycles Completed, at Failure Assessment Manager: A1 age 7 of 13

8 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties As listed on age 7 TRUCTURAL TET (cont d) DYNAMIC TET Vibration (Hydraulic) inusoidal, Random, ine on Random, Road Load Data with lip Table Facilities Using tandard and re-fabricated Temperature Chambers as necessary Frequency Range: 1 to 350 Hz rocedures (as agreed with customers) Maximum eak Thrust: 250 kn Maximum ayload: 3500 kg Maximum Displacement: 250 mm (pk/pk) Temperature Range: - 40 C to C Assessment Manager: A1 age 8 of 13

9 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties VIBRATION TET (non-explosive items) DYNAMIC BODYHELL CENTRE CONOLE COMUTER & ERIHERAL ELECTRICAL CABLE ELECTRICAL EQUIMENT GEAR AEMBLIE VIBRATION (electromagnetic) ine, random, broadband random, swept sine, fixed sine dwell, sine-on-random, random-on-random - with slip table facility (a) Ambient Temperature Freq range: 2.5 to 3150 Hz Max peak thrust: 27 kn Max payload (vertical): 454 kg DEF TAN 00-35, Chapter 2-01:1997 B EN :2008 B EN :2008 IEC :1993 IEC :1995 B 3G100:art 2: ubsection 3.1:1969(1983) RTCA DO 160E:8.0:2004 A EQUIMENT Max payload (horizontal): LATIC AND RODUCT Horizontal pay load (LD 824) = DEF TAN :2000 [16,600 / (75 + X)] kg Data heet 25 RINTED CIRCUIT BOARD (externally generated) REONATOR/EXANION TANK ROOF CONOLE ROOF LINER IGNALLING EQUIMENT TEERING AEMBLIE UB-EA CONNECTOR TELECOMMUNICATION EQUIMENT TURBOCHARGER Where X = mm distance from payload mounting face to CoG of Load Max displacement: 25.4 mm pk-pk (b) High/Low Temperature (tandard Enclosure) Ranges as above, Max temp: C Min temp: - 40 C Chamber size: 0.8 m x 0.8 m x 0.8 m DEF TAN 07-55:1983 Test A1 Test A2 MIL-TD 810F:2001 Method Method Assessment Manager: A1 age 9 of 13

10 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties VIBRATION TET (non-explosive items) (cont d) As listed on age 9 HOCK Classical shock with half sine, initial and terminal peak sawtooth, trapezoidal, and rectangular pulse shape - Horizontal & Vertical half sine, sawtooth Max item mass: 454 kg - ambient & with temperature (prefabricated enclosure) DEF TAN Chapters 2-03, 2-06 and 2-07:1997 RTCA DO 160E:7.0:2004 B EN :2009 IEC :1987 DEF TAN 07-55:1983 Test A3 MIL-TD 810F:2001 Method DEF TAN :2000 Data heet 28 everity: 1 g to 210 g Duration: 1 ms to 70 ms (severity dependent) Max temp: C Min temp: - 40 C BUM - ambient & with temperature (prefabricated enclosure) Max item mass: 454 kg Max temp: C Min temp: - 40 C DEF TAN 00-35, Chapter 2-12:1997 B EN :2007 IEC :1987 DEF TAN 07-55:1983 Test A5 EAT AND THEIR COMONENT EAT ERFORMANCE TET OCCUANT INGRE/EGRE Manual & Automated using purpose built robots Ford D T-0035 REURE MAING rocedure TC Assessment Manager: A1 age 10 of 13

11 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties EAT AND THEIR COMONENT (cont d) EAT ERFORMANCE TET (cont d) AIRBAG DELOYMENT Temperature range: - 40 C to C Ford AA-0001, 0002, 0013, 0015, and 0034 ERFORMANCE CHECK a) Manual eats - Force (Operating Efforts) - Displacement - Free lay - Co-ordinates (H-oint) using FARO arm Ford D pecs Nissan ND pecs Toyota TF pecs Land Rover LRE pecs GM pecification GMW14109 Excluding b) owered eats - Voltage - Current - Operating noise - Co-ordinates (H-oint) using FARO arm Ford D T-0010v6 DURABILITY Manual & owered eats - Track - Height - Recline - Lumbar - Head-rest - Tilt Ford D pecs Nissan ND pecs Toyota TF pecs Land Rover LRE pecs MECHANICAL FATIGUE Using purpose built reaction frames, with sinusoidal, random, synthesised, and road load data control inputs Ford D pecs Nissan ND pecs Toyota TF pecs Land Rover LRE pecs Max force: 200 kn Max frequency: 50 Hz (force/stiffness dependent) Assessment Manager: A1 age 11 of 13

12 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties EAT AND THEIR COMONENT (cont d) EAT ERFORMANCE TET (cont d) TRIM eat system material wear Ford D pecs Nissan ND pecs Toyota TF pecs Land Rover LRE pecs TRENGTH tatic/low frequency (using purpose built reaction frames) Temperature range: - 40 C to C (using standard or prefabricated chambers) Max specimen size: 20 m x 5 m x 5 m (L x W x H) Max single force: 250 kn Ford D pecs Nissan ND pecs Toyota TF pecs Land Rover LRE pecs roperties measured: displacement, mechanical strain, acceleration, pressure, force HEATED EAT DURABILITY AND ERFORMANCE CHECK Temperature range: - 40 C to C (using standard chambers) Ford D T-0087 Assessment Manager: A1 age 12 of 13

13 2 ine Trees, Cher t s ey L an e, tai nes - u po n - T ham es, TW 18 3HR, UK Millbrook roving Ground Ltd Materials/roducts tested Type of test/roperties EAT AND THEIR COMONENT (cont d) EAT ERFORMANCE TET (cont d) VIBRATION DURABILITY Using 6-axis shaker table Max payload: 2500 kg Ford D T-0009 VIBRATION TRANMIIBILITY Using purpose built rig Ford D T-0784 END Assessment Manager: A1 age 13 of 13

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Unit 1 Quatro Park Paycocke Road Basildon Essex SS14 3GH Contact: Mr E Martin Tel: +44 (0)1268 290115 Fax: +44 (0)1268 290123 E-Mail: eamonn.martin@mira.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK High Post Contact: Enquiries +44 (0)1722 411611 Salisbury Tel: +44 (0)1722 428739 Wiltshire Fax: +44 (0)1722 428794 SP4 6AS E-Mail: ian.callender@chemringcm.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bldg 3, Rm RM6 Contact: Gareth Williams Environmental Test Centre Tel: +44 (0)1702 383589 MoD Shoeburyness Fax: +44 (0)1702 383037 Southend-on-Sea

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Environmental Engineering Department PB 500 PO Box 19 Six Hills Way Stevenage Hertfordshire SG1 2DA Contact: Mr V Patel/Mr S Warner Tel: +44 (0)1438 752857/752873 Fax: +44 (0)1438 753130 E-Mail: simon.warner@mbda-systems.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Stratford Road Solihull West Midlands B90 4GW Contact: Mr C Gregory Tel: +44 (0)121 627 3225 Fax: +44 (0)121 627 4353 E-Mail: colin.gregory@trw.com Website:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:

More information

President For the Accreditation Council Certificate Number Valid to August 31, 2008

President For the Accreditation Council Certificate Number Valid to August 31, 2008 A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey ane, Staines-upon-Thames, TW18 3HR, UK Kiwa td t/a Kiwa Gastec Kiwa House Malvern View Business Park Stella Way Bishops Cleeve Cheltenham Gloucestershire G52 7DQ Contact: Mrs Thomas

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HP PELZER MATERIALS TESTING LABORATORY 1175 Crooks Road Troy, MI 48084 Renata Machnik Phone: 248 280 2500 x176 MECHANICAL Valid To: November 30, 2018 Certificate

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GHESQUIERE PLASTIC TESTING, INC. 20450 Harper Avenue Harper Woods, MI 48225 Douglas Leggat Phone: 313 885 3535 Fax: 313 885 1771 E-mail: doug@gptesting.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2013 Certificate Number: 2563.02

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com

More information

j Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

j Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK j Schedule of Accreditation Laboratory locations: Ridley Street lyth Northumberland NE24 3AG United Kingdom ORE Catapult Development Services Limited a subsidiary of Contact: Geoff Richardson Tel: +44

More information

Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra

Faurecia Interior Systems India Pvt. Ltd., Test Laboratory, Plot No. T-187, Pimpri Industrial Area (B. G. Block), Bhosari, Pune, Maharashtra Last Amended on - Page 1 of 5 I. AUTOMOTIVE COMPONENTS 1. Component Testing (Rubber & Plastic Products) a. (Plastics/Fabric/ Soiling & Cleanability Ford FLTM BN 112-08: 2010 Daimler DBL 5399: 2007 General

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GUILFORD PERFORMANCE TEXTILES KENANSVILLE 1754 NC 903 / Highway 11 North Kenansville, NC 28349 Teresa Carter Phone: 910 296 5314 MECHANICAL Valid To: May 31,

More information

High Current Thermal Fuse

High Current Thermal Fuse High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 50 A Suitable for insert assembly systems Material categorization: For definitions of

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2018 Certificate

More information

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01

More information

ENVIRONMENTAL TESTING

ENVIRONMENTAL TESTING ENVIRONMENTAL TESTING Environmental Testing Foreword & Introduction Tests Heat - Cold - Climate Page 3 Thermal Shock Page 4 Low - High Pressure Page 4 Vibration Page 5 Mechanical Shock Page 6 Corrosive

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Stephen Laya (QA Manager) Phone: 630 495 9770 ext. 119 Email: sglaya@elitetest.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EQUIPO AUTOMOTRIZ AMERICANA S.A. DE C.V. Lib. Carlos Salinas de Gortari #198 Norte Cd. Frontera, Coahuila C.P., Mexico 25618 Abelardo Castilla Abelardo.Castilla@takata.com

More information

Our test laboratory - Apparatebau Kirchheim-Teck GmbH

Our test laboratory - Apparatebau Kirchheim-Teck GmbH 1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Larry Brooks (QA Manager) Phone: 630 495 9770 ext. 166 Email: lbrooks@elitetest.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MGA RESEARCH CORPORATION 4 446 Executive Drive Troy, MI 48083 Helen Kaleto Phone: 248 577 5001 Email: helen.kaleto@mgaresearch.com Website: www.mgaresearch.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 480 West 5 th Street Bloomsburg, PA 17815 Justine Danilowicz Phone: 570 316 6078 MECHANICAL Valid To: April 30, 2019 Certificate

More information

SPECIFICATION FOR BATTERY, NON-RECHARGEABLE, ALKALINE MANGANESE DIOXIDE, 1.5V, NATO STOCK NO XXX-XXXX (NATO TYPE DESIGNATION NBA 3058)

SPECIFICATION FOR BATTERY, NON-RECHARGEABLE, ALKALINE MANGANESE DIOXIDE, 1.5V, NATO STOCK NO XXX-XXXX (NATO TYPE DESIGNATION NBA 3058) 4 JUNE 1984 SPECIFICATION FOR BATTERY, NON-RECHARGEABLE, ALKALINE MANGANESE DIOXIDE, 1.5V, NATO STOCK NO 6135-99-XXX-XXXX (NATO TYPE DESIGNATION NBA 3058) 1 This Supplement is to be read in conjunction

More information

mm. Film dielectric trimmers QUICK REFERENCE DATA

mm. Film dielectric trimmers QUICK REFERENCE DATA 5 mm FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round or hexagonal head Vertical version. APPLICATIONS For consumer and industrial equipment. DESCRIPTION The vanes of the trimmer are

More information

Steering Module Test Simulator SMTS

Steering Module Test Simulator SMTS Steering Module Test Simulator Overview The Steering Module Test Simulator () from MB Dynamics is a non-hydraulic turnkey lab test system, offering accurate, reliable and repeatable in-laboratory simulations

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Cyclic Corrosion Chamber C.C.T AUTO Series

Cyclic Corrosion Chamber C.C.T AUTO Series Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE

Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE 4 Aerospace For any aircraft, helicopter, space vehicle or ballistic device, reliability is the number one priority. By using our vibration test

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431

More information

ROLEC Gehäuse-Systeme GmbH Mr. Volker Borcherding Kreuzbreite 2 D Rinteln

ROLEC Gehäuse-Systeme GmbH Mr. Volker Borcherding Kreuzbreite 2 D Rinteln Reg.-Nr. DAP PL 2812.00 Labor für Umwelterprobung und Werksffprüfung Telefon +49-3 41 / 4 84 32-25 Telefax +49-3 41 / 4 84 32-14 email umwelterprobung@tzoleipzig.de Technologie Zentrum Oberflächentechnik

More information

SEP 2016 Rev D2

SEP 2016 Rev D2 Product Specification 108-2112 28 SEP 2016 Rev D2 VAL-U-LOK* Connectors 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for VAL-U-LOK* Connectors. 1.2. Qualification

More information

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en

S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV

More information

Metal Oxide Varistor:TVR-M Series

Metal Oxide Varistor:TVR-M Series Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. Wide continuous voltage range: 30Vac ~ 465 Vac 4. Operating temperature range: -40 C ~ +25 C 5. Storage temperature range: -40 C ~

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APPLIED TECHNICAL SERVICES, INC. 1049 Triad Court Marietta, GA 30062 Cathy Mansfield Phone 770 423 1400 cmansfield@atslab.com MECHANICAL Valid To: June 30,

More information

Test procedure/method identification

Test procedure/method identification Testing laboratory location: 1 NOV 2 UHE Úhelnice 41, 294 06 Úhelnice 3 BEZ Uno Technology Park, Hala H1a, Bezděčín č.p. 108, 293 01 Mladá Bolesla 4 VTP Přílepská 1920, 252 63 Roztoky u Prahy 5 KTG Bílý

More information

Modification Record of Product Specification

Modification Record of Product Specification Modification Record of Product Specification No, DSP-14 1303 Product Name SRV Connector Systems Rev. No, Note Reason Place Date Engineer R0 Initial Release DEC 2.19.14 A.M. Page 1/17 PRODUCT SPECIFICATION

More information

Approval Sheet for. Lithium and Iron Disulfide Battery. Model: LFB-AAA

Approval Sheet for. Lithium and Iron Disulfide Battery. Model: LFB-AAA Approval Sheet for Lithium and Iron Disulfide Battery Model: LFB-AAA AA Portable Power Corp (http://www.batteryspace.com) Address: 2700 Rydin Road, Unit C, Richmond, CA, 94804 Tel: 510-525-2328, Fax: 510-439-2808

More information

Huntsville- Aerospace Testing & Engineering Services Highway 20 West Huntsville, AL 35806

Huntsville- Aerospace Testing & Engineering Services Highway 20 West Huntsville, AL 35806 Huntsville- Aerospace Testing & Engineering Services 7800 Highway 20 West Huntsville, AL 35806 Facility Overview Huntsville Facility Overview Site: Total Square Footage: 92 Acres 160,000 sq. ft. of Laboratory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com

More information

Astm E83. Astm E83

Astm E83. Astm E83 We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with astm e83. To get started

More information

Ø 5 mm Film Dielectric Trimmers

Ø 5 mm Film Dielectric Trimmers Ø 5 mm Film Dielectric Trimmers FEATURES Housing diameter 5 mm Top and bottom or top adjustment Round head Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

LVD TEST REPORT EN : 2006+A12: MEASUREMENT AND TEST REPORT For. Ingtron Enterprise Co., Ltd.

LVD TEST REPORT EN : 2006+A12: MEASUREMENT AND TEST REPORT For. Ingtron Enterprise Co., Ltd. LVD TEST REORT EN 60950-1: 2006+A12: 2011 MEASUREMENT AND TEST REORT For Ingtron Enterprise Co., Ltd. No. 211-1, Qingfeng Road, Qingxi Town, Dongguan City, Guangdong, China Model: reference page 2 Feb.

More information

Quality Product and Package Testing

Quality Product and Package Testing TM WESTPAK, INC. Locations: 83 Great Oaks Boulevard San Jose California 95119 Phone: 408.224.1300 Fax: 408.224.5113 10326 Roselle Street Suite 101 San Diego California 92121 Phone: 858.623.8100 Fax: 858.623.8101

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Eastfield Peterborough Cambridgeshire PE1 5NA United Kingdom Contact: Mr Tom Simpson Tel: +44 (0)1733 583034 Fax: +44 (0)1733 582240 E-Mail: simpson_tom@perkins.com Website: www.perkins.com Testing performed

More information

Metal Oxide Varistor:TVR-M Series

Metal Oxide Varistor:TVR-M Series Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C

More information

3M CP2 Press-Fit Headers and Sockets, 2 mm

3M CP2 Press-Fit Headers and Sockets, 2 mm 1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February

More information

Film Dielectric Trimmers

Film Dielectric Trimmers Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 8 mm x 9 mm x 10 mm For a basic grid of 2.54 mm Versions available with 1 or 2 rotor contacts Top and bottom adjustment Mounting:

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech

More information

PDR circuit breaker - Ground fault Datasheet

PDR circuit breaker - Ground fault Datasheet - Ground fault Datasheet protection device Features Blue housing 1-3 poles plus neutral 7-100mA Preciese, temperature independent operation Choise of time delays, terminals and actuator colours Application

More information

Film Dielectric Trimmers

Film Dielectric Trimmers Film Dielectric Trimmers FEATURES High temperature type Housing dimensions: 11 mm x 14 mm x 9 mm For a basic grid of 2.54 mm Top adjustment Mounting: radial Material categorization: for definitions of

More information

Jun 20,2014 Rev A

Jun 20,2014 Rev A Product Specification 108-115067 Jun 20,2014 Rev A DDR4 DIMM Through-hole Memory Socket 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 RELIABLE ANALYSIS SHANGHAI, INC. No. 10, 12A, 24 Lane 1365 Kang Qiao Road East Shanghai, People s Republic of China, 201319 Mr. Victor Wen Phone: 86 21 6818

More information

PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch

PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch PRODUCT RELIABILITY TESTING: Environmental, Mechanical and Packaging Case study: 19 Rackmount Switch Herb Schueneman President & CEO Presenter Mike Brown Laboratory Manager Presenter June 2015 Overview

More information

Product Specification

Product Specification Product Name : AEM Part Number : ES0402V014CT Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028

More information

EMC and Durability Lab, HCL Technologies Ltd., #73-74, South Phase, Ambattur Industrial Estate, Chennai

EMC and Durability Lab, HCL Technologies Ltd., #73-74, South Phase, Ambattur Industrial Estate, Chennai Last Amended on - Page 1 of 10 I. EMI / EMC TESTS 1. IT Products / Household / Industrial / Medical / Network Telecommunications Equipment Radiated Emission Test (RE) CISPR11:2010 BSEN 55011:2010 CISPR22:2008

More information

Cyclic Corrosion Test CORR Series

Cyclic Corrosion Test CORR Series Cyclic Corrosion Test CORR Series CCT 1300 CORR image merely illustrative Specifications/Model CCT 1300 CORR CCT 3000 CORR CCT 5000 CORR - Mode: SALT SPRAY / SALT FOG - Mode: WATER CONDENSATION HUMIDITY

More information

42 mm sq inch sq.

42 mm sq inch sq. tepping Motors 42 mm sq. 1.65 inch sq. 1.8 /step lim form winding Lead wire type winding Lead wire type Model number Holding torque at Rated current Wiring Winding Mass Rotor inertia 2-phase energization

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 288 Ckt Vertical Press Fit DDR4 DIMM 2.4mm Seating Plane 1.0 SCOPE This Product Specification covers the 0.85 mm centerline gold plated DDR4 DIMM edge card connector for 1.40 +/- 0.10 thick memory modules.

More information

Electronic circuit breaker EBU10-T

Electronic circuit breaker EBU10-T Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EMCCONS DR. RASEK GMBH & CO. KG 1 Boelwiese 8 91320 Ebermannstadt, GERMANY Dr.-Ing. Andreas Abach (Primary Contact) Phone: + 49 9194 7262-0 Email: a.abach@emcc.de

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 100W Single Output Switching ower Supply MODEL:RS-100-48 OUTUT FUNCTION

More information

IEC , 1 Ed. ( ) TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING

IEC , 1 Ed. ( ) TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC YTEM FOR CONFIRMITY TETING AND COMMITTEE OF TETING LABORATORIE IEC 62368-1, 1 Ed. (2010-01) TETING AND MEAURING EQUIPMENT/ALLOWED UBCONTRACTING R = Required to be at Lab = May be subcontracted W =

More information

QSFP Copper Module Direct Attach Cable Assembly &Cage

QSFP Copper Module Direct Attach Cable Assembly &Cage Qualification Test Report 501-60067 12Mar. 2012 Rev. 1 QSFP Copper Module Direct Attach Cable Assembly& Qualification Test Report QSFP Copper Module Direct Attach Cable Assembly & Tyco Electronics. (Shanghai)

More information

AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00

AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00 AUTOMOTIVE TESTS BMW AUTOMOTIVE3.2.4.2 Pile Yarn Thickness $ 25.00 BMW 3.2.10 Imprint Behavior Without Foam Impression Depth @ 60 Minutes and 24 hours (DIN 54316/EN20 105 A02) $ 75.00 BMW 3.2.10.2 Tested

More information

--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T

--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T

More information

S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en

S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break

More information

HUMIDITY / TEMPERATURE TRANSMITTER

HUMIDITY / TEMPERATURE TRANSMITTER HUMIDITY / TEMPERATURE TRANSMITTER SEM161, SEM16 CONFIGURATION USING USB PORT POWERED CONFIGURATOR HUMIDITY, TEMPERATURE, DEW POINT MEASUREMENT INTERCHANGEABLE DIGITAL SENSOR HIGH ACCURACY AND STABILITY

More information

MCF3 25CT Inrush-withstand

MCF3 25CT Inrush-withstand RoHS Pb Dimensions and construction: (mm) Case: End-cap substrate metal: End-cap primary plating: End-cap surface plating: Adhesive: Marking: Ceramic Copper t=0.25 mm Nickel plated, 0.5 μm or more Tin

More information

Systems. Dynamic Test. Electrodynamic Vibration Test Systems

Systems. Dynamic Test. Electrodynamic Vibration Test Systems Systems 100 - water 120 kn cooled Electrodynamic Vibration Test Systems SW3-10480APP (100KN) SW3-10LS3-550APP (100KN) SW3-10650APP (100KN) SW3-12480APP (120KN) SW3-12LS3-550APP (120KN) Dynamic Test Technical

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition

More information

Overview. Contents. Overview

Overview. Contents. Overview 1/0 Overview 1 Contents Overview 3-pole Block Contactors and Motor Protection... 1/ 4-pole Block Contactors... 1/3 Contactors for Specific Applications... 1/4 Mini Contactors and Motor Protection... 1/

More information

Steering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2

Steering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2 Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.

More information

ISO INTERNATIONAL STANDARD. Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 4: Climatic loads

ISO INTERNATIONAL STANDARD. Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 4: Climatic loads INTERNATIONAL STANDARD ISO 16750-4 First edition 2003-12-15 Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 4: Climatic loads Véhicules routiers Spécifications

More information

Auxiliary Relay (7PJ11) and Trip Relay (7PJ12)

Auxiliary Relay (7PJ11) and Trip Relay (7PJ12) s www.siemens.com/energy Auxiliary Relay (7PJ) and Trip Relay (7PJ2) Better protection and more efficiency for your power system Answers for infrastructure and cities. Auxiliary Relay and Trip Relay Catalogue

More information

4.28±0.05V 2.4±0.1V. W :29.0mm T :11.1mm

4.28±0.05V 2.4±0.1V. W :29.0mm T :11.1mm age 3 of 16 articulars: test item vs. test requirements Max. charge voltage...: 4.2V Max. Charge current...: Standard discharge current...: 1050mA 210mA Overcharge protection voltage...: Over discharge

More information

APS 113 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5

APS 113 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying dynamic

More information

HIGHEST SPEED smooth minimal ripple motion

HIGHEST SPEED smooth minimal ripple motion HIGHET EED smooth minimal ripple motion Highest force in compact size for point-to-point motion systems DX series ironless patented overlapping winding forcers provides excellent force density Vs coil

More information

P-Series 11 to to to to to to to 1100 >1000 <25

P-Series 11 to to to to to to to 1100 >1000 <25 Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics

More information

Film Dielectric Trimmers

Film Dielectric Trimmers TEST VOLTAGE (DC) FOR 1 MINUTE: 5 V MAXIMUM CONTACT RESISTANCE: 5 mω MINIMUM INSULATION RESISTANCE: 1 MΩ FEATURES High temperature type Housing dimensions: 1 mm x 11 mm x 11 mm For a basic grid of 2.54

More information

Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.

Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47. Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover

More information

Bosch Blue Line Your first choice in brake pads NEW

Bosch Blue Line Your first choice in brake pads NEW Bosch Blue Line Your first choice in brake pads NEW Bosch Blue Line brake pads: The perfect match for your vehicle OE design approach The brake system on every new vehicle has been tuned specifically to

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS CZESTOCHOWA ENGINEERING CENTER VALIDATION LABORATORY 1 Branch Laboratory ul. Pulaskiego 78 Czestochowa, Poland PL-42-200 Pawel Kantor,

More information

Actuator LA35. Data sheet LINAK.COM/TECHLINE

Actuator LA35. Data sheet LINAK.COM/TECHLINE Actuator LA35 Data sheet LINAK.COM/TECHLINE LA35 The LA35 is a very quiet and powerful actuator, and provides a practical and cost-effective solution with low power consumption. The actuator is designed

More information

CERTIFICATE OF COMPLIANCE

CERTIFICATE OF COMPLIANCE LG Chem, Ltd. 128, Yeoui-daero, Yeongdeungpo-gu, Seoul, Korea Certification & Evaluation Team Tel: 82-42-870-6195, Fax: 82-42-863-0182 If any of pages is not legible or has not been received, please notify

More information

Test report No.: VU

Test report No.: VU Department of Environmental / Vibration Engineering Test report No.: 2017-0277-VU Date of test: June - July 2017 Testers: No. of pages: 13 Applicant/ manufacturer: Test specimens: Test procedures / bases:

More information