HUMIDITY / TEMPERATURE TRANSMITTER
|
|
- Bryce Shepherd
- 6 years ago
- Views:
Transcription
1 HUMIDITY / TEMPERATURE TRANSMITTER SEM161, SEM16 CONFIGURATION USING USB PORT POWERED CONFIGURATOR HUMIDITY, TEMPERATURE, DEW POINT MEASUREMENT INTERCHANGEABLE DIGITAL SENSOR HIGH ACCURACY AND STABILITY DISPLAY OPTION USER CALIBRATION FACILITY INTRODUCTION The SEM161 /16 are a cost effective smart humidity transmitter with a single two wire (4 to 0) ma ( SEM161) or dual two wire (4 to 0) ma (SEM16). The design uses a digital sensor which plugs into the sensor stem. A 4 digit display option is also available. The product will measure humidity, temperature, dew point and delta T (the difference between dewpoint and ambient temperature) values. Using our free software, available on our website, PC configuration allows you to measure any one of these 4 parameters on the SEM161, or any two on the SEM16. You can even programme the SEM16 to measure the same parameter on both loops. Configuration is performed quickly using our new USB port driven configurator by connecting the transmitterto the configurator and following the software instructions. The software allows you to tag the device, set installation date and set range. Either fixed ranges or your own custom ranges can be configured for all types in C or F. The 4 digit LED display option provides you with a visual indication of the process parameters, the display may be set to indicate either humidity, temperature, dew point or toggle between all three parameters. Using our popular SCH4 connection head, the SEM161/16 series can be ordered for duct, wall or remote sensor mounting. SEM161 / 16 DISPLAY OPTION R H TEMP D P RH CH 1 PT100 SENSORS MCU COMMS 3 CH SEM16 only 4 PC CONFIGURATION Running Windows XP or later with USB port MCONFIG SOFTWARE COMPUTER USB CONFIGURATOR GREY / BLACK GREY Disk or
2 HUMIDITY / TEMPERATURE TRANSMITTER 0 C INPUT Sensor Type Humidity/Temperature Humidity Range (0 to 100) % RH Temperature Range (30 to 100) C PROCESS ACCURACY (without Alignment) Humidity ± % Temperature ± 0.4 C CH1 OUTPUT (No Channel fitted) Humidity Range (0 to 100) % RH Temperature Range (30 to 100) C ( to 1) F Dew Point Range (30 to 100) C ( to 1) F (T amb T dew point) (0 to 50) C (3 to 1) F Output Type wire 4 to 0 ma current loop Output range (4.0 to 0.0) ma Output Connection Two Part Screw Terminal Maximum 0.5 ma (in high burnout condition) Minimum 3.9 ma (in low burnout condition) Accuracy (ma x ) or 5 ua (Whichever is the greater) Loop Voltage effect 0. ua / V Thermal drift 1 ua / C Maximum load [(Vsupply10)/0] K Ohms (Example: 700 4V) APPROVALS EMC BS EN 6136 :1998 Electrical equipment for measurement control and laboratory use. ANNEX A Immunity test requirements for equipment intended for use in industrial locations ANNEX F Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. IEC Electrostatic discharge IEC EM Field IEC Transient Burst () IEC Surge () MECHANICAL Output Connection M0 Wire Range: Solid Wire (AWG) 0 8 Stranded Wire 0 8 Wire Strip Length (6 to 7) mm DUCT WALL DISPLAY OPTION Type Ranges Resolution Update rate 4 digit (9 mm) Red LED Humidity, Temperature, Dewpoint 0.1 % 0.1 C / F 800mS GENERAL SPECIFICATION Update time 3 Seconds Start up time 10 seconds ( I out < 4 ma during start up) Power Supply (10 to 30) Volts dc (15 to 30) Volts dc with display *1 Approximation Assuming constant air pressure ENVIRONMENTAL Probe Ambient operating range (30 to 100) C Ambient humidity range 0 to 100% RH 131., 70 or 550 Transmitter Ambient operating range (30 to 85) C Ambient storage temperature (50 to 90) C Ambient humidity range (10 to 90) % RH non condensing REMOTE SENSOR ACCESSORIES: USB CONFIGURATOR SUITE USBKIT 170 mm ( or 5) Metres Status Instruments Ltd Tel: 44 (0) Green Lane Business Park Fax: 44 (0) Green Lane, Tewkesbury sales@status.co.uk Gloucestershire, UK Website: GL0 8DE D SEM161_16 data sheet
3 RELATIVE HUMIDITY AND TEMPERATURE TRANSMITTERS SEM164 SERIES HUMIDITY & TEMPERATURE (4 TO 0) ma OUTPUTS WALL OR DUCT MOUNTING LOCAL DISPLAY OPTION IP65 ASSEMBLY ± 3 % RH STANDARD ± % RH OPTION 5 YEAR WARRANTY INTRODUCTION The SEM164 series transmitters provides two (4 to 0) ma s proportional to temperature and relative humidity and are suitable for either direct mounting in ducts or onto a flat surface, making them ideally suitable for building energy management applications. The sensor can be exposed to (5 to 80) C and (0 to 100) % RH, the head and electronics can be subjected to (0 to 55) C. It is supplied as either a basic (4 to 0) ma transmitter or optionally with a loop powered LCD display for RH or Temperature. A remote display can be used to indicate the second measured parameter. The terminal head housing is ABS impact resistant material with the sensor tip moulded in low moisture absorption polypropylene with a removable PTFE membrane filter in order to achieve fast thermal response whilst shielding the sensor from dust and grime. 0 C MECHANICAL DETAILS Measuring Range (5 to 80) C Sensor (tip) Humidity (10 to 95) % RH, capacitive type Ambient Range (0 to 55) C Electronics (head) Humidity (0 to 100) % RH Supply Voltage (13 to 3) VDC maximum Accuracy RH ± 3 % standard (± % option) Hysteresis RH Less than 3 % (± 1 % option) Accuracy Temp C. Pt100 sensor Response Time (10 to 90) % RH less than 10 s Linearity (5 to 95) % ± 1.5 % RH (All dimensions in mm) Output APPROVALS EMC (0 to 100) % RH = (4 to 0) ma linear (0 to 50) C =(4 to 0) ma linear BS EN
4 RELATIVE HUMIDITY AND TEMPERATURE TRANSMITTERS TYPICAL APPLICATION RH INDICATOR SEM DM700 TEMPERATURE INDICATOR 186 DM700 4 V 0 V 4 V 0 V ORDER CODE SEM164 / GRADE / SENSOR Wall mount Duct mount W D ± 3 % RH standard 3 ± % RH option RH/Temperature x (4 to 0) ma s RH only 1 x (4 to 0) ma HP H Status Instruments Ltd Tel: 44 (0) Green Lane Business Park Fax: 44 (0) Green Lane, Tewkesbury sales@status.co.uk Gloucestershire, UK Website: GL0 8DE Issue 01
5 HIGH TEMPERATURE RH AND TEMPERATURE TRANSMITTER SEM165 DUCT MOUNTING HIGH TEMPERATURE RAPID RESPONSE ROBUST CONSTRUCTION OUTPUT OPTIONS INDICATION OPTIONS 5 YEAR WARRANTY INTRODUCTION The SEM165 series are stainless steel bodied probes offering an excellent performance in harsh industrial process control environments and energy management applications. The SEM165 probe operates from (30 to 140) C. Single hole mounting via a ¼ BSP pressure gland allows for simple installation into ducts pipes or process chambers and facilitates adjustment of insertion depth. The Status Instruments SCH4 terminal head is sealed to IP65 with cable entry via a M0 cable gland. High temperature RH probe operation option from (30 to 140) C and presents a versatile solution for the majority of humidity and temperature control applications. 0 C RELATIVE HUMIDITY Sensor Capacitive Measurement Range (0 to 100) % RH Accuracy RH ± % Operating Temperature (30 to 140) C OUTPUT Output Load (max.) (V supply 1) kω 0 TEMPERATURE Sensor Pt100 MECHANICAL DETAILS (All dimensions in mm) OUTPUT (4 to 0) ma, wire Output Load (max.) (V supply 1) kω 0 Spans (0 to 100) Standard Other options to order Accuracy Temperature ± 1 C GENERAL Pressure Rating Supply Voltage Connections APPROVALS EMC (0.04 to 30) Bar (1 to 3) VDC (Nominal 4 V) Screw terminals BS EN6136
6 HIGH TEMPERATURE RH AND TEMPERATURE TRANSMITTER TYPICAL APPLICATION RH INDICATOR SEM164 SEM DM700 TEMPERATURE INDICATOR 186 DM700 4 V 0 V 4 V 0 V ORDER CODE SEM165 (30 to 140) C RH/Temperature Status Instruments Ltd Tel: 44 (0) Green Lane Business Park Fax: 44 (0) Green Lane, Tewkesbury sales@status.co.uk Gloucestershire, UK Website: GL0 8DE Issue 01
7 HUMIDITY TRANSMITTER SEM167H1 (4 to 0) ma or (0 to 10)V OUTPUT HIGH ACCURACY EXCELLENT STABILITY WALL, DUCT or REMOTE SENSOR MOUNTING CHOICE OF PROTECTION FILTERS REPLACEABLE HUMICHIP MOISTURE RESISTANT DISPLAY OPTION INTRODUCTION The SEM167H1 transmitter operates by using the value made by a highly accurate capacitive sensor that is integrated in a silicon microchip. This new technology allows for accurate process measurements, is extremely reliable, and offers excellent longterm stability. The sensor is very durable and moisture resistant. The Humichip module that incorporates the sensor can be easily interchanged without the need for recalibration. For further operator ease of use, relative humidity values can be displayed on the optional integrated LCD display, or sent via analogue s to other display devices C ENVIRONMENTAL TEMPERATURE 1 st Output Humidity Range Output Accuracy (0 to 100) % RH (4 to 0) ma wire; 500 Ω max or (0 to 10) V; 500 Ω min 1.8 % between (10 to 90) % RH Nonlinearity, hysteresis and repeatability included Working limits See figure 1 Typical longterm drift < 0.5 RH % / Year nd Output Temperature (option) Available Ranges (30 to 70) C ( to 158) F (0 to 30) C (4 to 86) F (0 to 50) C (3 to 1) F (0 to 100) C (3 to 1) F Output (4 to 0) ma wire; 500 Ω max or (0 to 10) V; 500 Ω min Accuracy (4 to 0) ma <0.5 C between (0 to 80) C (4 to 176) F (0 to 10) V <0.5 C between (0 to 50) C (3 to 1) F RTD Output as alternative to ma or V Output (PT100 IEC 751) Tolerance: Class B (1/ Din) 3 wire connection LCD display (option) Digital display dimensions Display Range 10.5 mm 0.0 to % RH General Characteristics Housing material Protection Probe material Safety Electromagnetic Compatibilty Environmental temperature housing Electrical Housing %RH Epoxy painted aluminum (RAL7038) IP66 SS AISI316 for remote sensor version PVDF probe for duct mounting version Compliance to EN610101, double isolation, pollution class, installation class II Compliance to CE standards EN50081, EN5008 (5 to 70) C standard (0 to 60) C with nd temperature and / or display Spring terminal strip, AWG816 wire "Normal" condition "Limit" condition Figure 1 Power Supply (4 to 0) ma Output (10 to 30) Vdc (0 to 10) V Output (18 to 7) V ac or (0 to 30) V dc (Power consumption W Max) C The measured reading tolerance is guaranteed through the Normal working conditions A longtime period, at Limit conditions may generate a permanent drift up to RH %.
8 HUMIDITY TRANSMITTER X1 X1 T T H H Temperature (0 to 10) V Humidity (0 to 10) V T T H H (10 to 30) Vdc (10 to 30) Vdc Temperature (4 to 0) ma Humidity (4 to 0) ma L 6 (~) Power supply M (~) (0 to 30) V dc (18 to 7) V ac B b A Temperature PT B b A Temperature PT100 SEM 167H1 A B C D E F G H I 0 0 Mounting Wall Duct Remote Dimensions Ø13 x L5 Ø0 x L50 Ø0x L500 Ø0 x L100, cable m Ø0 x L100, cable 5 m Probe material C PVDF 0 Filter Stainless steel wire mesh Sintered Teflon 1st Output humidity E (4 to 0) ma ( wire) / (0 to 100) % RH 1 (0 to 10) V / (0 to 100) % RH Accessories / Spares HHUMICHIP Precalibrated HumiChip Module HFR15 Wire mesh filter PVDF plastic protection HFS105 Stainless steel sintered filter HFT10 Teflon Filter HFLA0 Adjustable flange Ø100 selflocking HSMP01 Wall mounting bracket for remote sensor HSFE Mounting brackets A P C C R R B D R S T LCD Display (option) I Not fitted 0 Internal LCD Display D Electrical connections Terminal, with M16 conduit Temperature range G (if F = 0 or F = P) 0 (30 to 70) C 1 (0 to 30) C (0 to 50) C 3 (0 to 100) C 4 H M nd Output Temperature (option) F not fitted 0 (4 to 0) ma ( wire) when 1st = (4 to 0) ma 1 (0 to 10) V when 1st = (0 to 10) V PT100 Complaince with IEC751 3 Status Instruments Ltd Tel: 44 (0) Green Lane Business Park Fax: 44 (0) Green Lane, Tewkesbury sales@status.co.uk Gloucestershire, UK Website: GL0 8DE D
TEMPERATURE - HUMIDITY VAISALA HMP155
TEMPERATURE - HUMIDITY VAISALA HMP155 SENSOR MEASURE SIGNAL OUTPUT ELECTRICAL SUPPLY MODEL IN EOL MANAGER Temperature 0...1 V 7 28 V VAISALA HMP45A Humidity 0...1 V 7 28 V VAISALA HMP45A APPLICATION The
More informationA and B Series Sensors for Humidity and Temperature for industrial applications from C and up to 25 bar
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH Sensors for Humidity and Temperature for industrial applications from -80...00 C and up to 5 bar AK... with SVKA.0E... duct version up to 150
More informationA and B Series Sensors for Humidity and Temperature for industrial applications from C and up to 25 bar
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-6704-0. Fax
More informationOptidew Vision Optical Dew-Point Meter
Optidew Vision Optical Dew-Point Meter Chilled Mirror Instruments A precision hygrometer, combining drift free measurement with the flexibility of a remote sensor. Ideal for laboratory and industrial measurements,
More informationA and B Series Sensors for Humidity and Temperature for industrial applications from C and up to 25 bar
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-6704-0. Fax
More informationPressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
More informationEB100 High Accuracy Miniature Pressure Transducer
Miniature design (body ø11 mm) High Accuracy EMI Protected per CE Compliance Wide Temperature Range Absolute DESCRIPTION The EB100 pressure transducer is the smallest design proposed by MEAS from the UltraStable
More informationDifferential Pressure Sensors
1 920 1920P01 Differential Pressure Sensors for neutral and mildly corrosive liquids and gases QBE63-DP Differential pressure sensor, suitable for gases and liquids, for the measurement of positive and
More informationBTE2000 / PTE2000 Series Precision stainless steel pressure transmitters
FEATURES...5 to...5 bar,...5 to...5 psi gage 1 For corrosive media in harsh environments 1...6 or... ma output Field interchangeable All welded stainless steel diaphragm construction MEDIA COMPATIBILITY
More informationDifferential Pressure Sensors
1 920 1920P01 Differential Pressure Sensors for neutral and mildly corrosive liquids and gases QBE63-DP Differential pressure sensor, suitable for gases and liquids, for the measurement of positive and
More informationPressure Transmitter
FCO318 Differential Pressure Transmitter Accuracy 0.25% of reading Ultra low pressure measurement Wide span adjustment 2-wire ma, 3-wire or 4-wire voltage output Two configurable relays and bi-colour LED
More informationDifferential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate Highly accurate measurements with calibration certificate Simple and quick
More informationPipe surface resistance thermometer, for clamping Model TR57-M, miniature design
Electrical temperature measurement Pipe surface resistance thermometer, for clamping Model TR57-M, miniature design WIKA data sheet TE 60.57 Applications Sanitary applications Food and beverage industry
More informationPortable pressure calibrator, Wally Box III Model CPH7600
Calibration technology Portable pressure calibrator, Wally Box III Model CPH7600 WIKA data sheet CT 17.01 Applications Calibration service companies and service industry Measurement and control laboratories
More informationExcellence in Level Measurement
Technical Data Sheet No. EFT7 Compact Capacitance Level Indicator Excellence in Level Measurement Afriso Eurogauge Ltd Imberhorne Lane, East Grinstead West Sussex. RH19 1RF Tel: 01342 323641 Fax: 01342
More informationDifferential pressure sensor
s 1 916 QBM3x20-.. QBM3x20-..D Differential pressure sensor for air and non-aggressive gases QBM3020-.. QBM3120-.. High degree of measuring accuracy Adjustable characteristic curve (pressure-linear or
More informationINTERNATIONAL METAL ENGINEERING
INDICATING TEMPERATURE TRANSMITTER WITH HART 8080HT UNIVERSAL SETTINGS WITH HART PROTOCOL FOR VARIOUS INPUT SIGNALS 2 WIRE TECHNOLOGY, 4 TO 20mA ANALOG OUTPUT HIGH ACCURACY IN TOTAL AMBIENT TEMPERATURE
More informationINTECH Micro 2300-RTD6
INTECH Micro 2300-RTD6 6 Channel RTD Input Station Overview. The Intech Micro 2300 Series is a system of modular I/O Remote Stations, that add an even lower cost option to Intech s already extensive intelligent
More informationOEM Pressure transmitter for industrial applications Type MBS Technical brochure
OEM Pressure transmitter for industrial applications Type MBS 1200 Technical brochure Features Designed for use in severe industrial OEM applications For medium and ambient temperatures up to 125ºC All
More informationPresentation Soft starters 0 Altistart 48 soft start - soft stop units
Presentation Soft starters 5 6 7 65_Ver.-EN.fm/ Presentation (continued) Soft starters Applications The Altistart 8 soft start - soft stop unit is a controller with 6 thyristors which is used for the torque-controlled
More informationEE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features. Display
EE300ExHT Humidity/Temperature Transmitter for Intrinsically Safe Applications The EE300Ex humidity / temperature transmitter has been designed specifically for measurement in explosion hazard areas. It
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationPressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
More informationFigure 1: WPR2 Dimensions and Hardware
Installation and Operation Instructions WPR2 Series (Max. Line Pressure < 300 PSI) Wet to Wet Differential Pressure Ø0.200" 2.60" 4.47" 5.47" 5.28" 3.00" Precautions Figure 1: WPR2 Dimensions and Hardware
More informationMBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationOutput signal active humidity DC V 22DTH-51MB DC V, DC V DC V DC V DC V DC V
Duct Sensor Humidity / Temperature Duct mounted combined humidity (VDC) and temperature sensor. 2% accurate rh, available with dual active outputs or passive for temperature. Nema 4X / IP65 rated enclosure.
More informationTURCK Inc Campus Drive Minneapolis, MN Application Support: Fax: (763) M2
Process INSTRUMENTATION TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-553-0016 Fax: (763) 553-0708 www.turck.com M2 TURCK Process Instrumentation Pressure Selection Guide
More informationETP80. Electronic Transmitter for Pressure, Differential Pressure and Level
ETP80 Electronic Transmitter for Pressure, Differential Pressure and Level The ETP80 is a series of pressure transmitters with a wide range of s to suit most applications. The transmitters can measure
More informationULTRAFLO 2000 ULTRASONIC LIQUID FLOW AND HEAT/ENERGY METERS FOR PERMANENT INSTALLATION HIGH TEMPERATURE SENSORS AS STANDARD
ULTRASONIC LIQUID FLOW AND HEAT/ENERGY METERS HIGH TEMPERATURE SENSORS AS STANDARD FOR PERMANENT INSTALLATION ULTRASONIC LIQUID FLOW AND HEAT/ENERGY METERS The Ultraflo 2000 is a Transit Time ultrasonic
More informationJUMO MIDAS S07 MA. OEM Pressure Transmitter - Maritime Approved. Applications. Brief description. Special features.
Page /0 JUMO MIDAS S07 MA OEM Pressure Transmitter - Maritime Approved Applications In the shipping and offshore sector: HVAC (heating, ventilating, and air conditioning) Refrigeration engineering Compressors
More informationOEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More informationPressure transmitter for marine applications MBS 33M
Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,
More informationMicro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES
MODE 729 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions...
More informationPressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
More informationHumidity. Characteristics. Applications. Capacitive humidity measurement, temperature measurement via Pt100/Pt1000 Sensor
GHM Messtechnik GmbH Sales Center International Schloßstraße 6 88453 Erolzheim Germany Fon +49-7354-937233-0 Fax -88 www.ghm-messtechnik.de info@ghm-messtechnik.de Humidity Characteristics Applications
More informationDL 01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
DL 0 Battery Powered for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless
More informationUser's Manual: Series 270I Model 270I Process Current Loop-Powered Isolator
User's Manual: Series 270I Model 270I Process Current Loop-Powered Isolator Table of Contents Page Introduction... 1 Description... 1 Specifications... 2 Installation... 3 Calibration... 4 General Maintenance...
More informationType E-10, E-11 Hazardous Area Explosion-proof Transmitters
Electronic Pressure Catalog > Hazardous Area > E-10, E-11 Type E-10, E-11 Hazardous Area Explosion-proof Transmitters Meets ANSI / ISA 12.27.01-2003 single seal requirements - no dual seal required Applications
More informationSmart Pressure Transmitter
DOC. NO.: C3500L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3500L 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
More informationDST600 Series Digi-Stem Thermometers
DST600 Series Digi-Stem Thermometers User Manual 04/12/12 WD1032 Rev L (05/24/16) For use with models: DST600 DST610, DST611, DST620 & DST621 DST640 DST650, DST651, DST660, DST661 Including I, R and P
More informationXMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
More informationPressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general industrial purposes Type MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all
More informationPressure transmitters for industrial applications Type MBS 4510
Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel
More informationSmart Pressure Transmitter
DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
More informationMid-West Instrument. Series 700 "Wet/Wet" Installation and Operating Instructions. Differential Pressure Transmitter
Mid-West Instrument IM_700/A Series 700 "Wet/Wet" Installation and Operating Instructions Differential Pressure Transmitter 6500 Dobry Dr. Sterling Heights, MI USA Toll Free: 800-648-5778 Ph 586-254-6500
More informationSubmersible Averaging Duct Transmitters BA/T#SA Temperature Transmitter Installation & Operations
Overview The BA/#-SA is for duct mounting 4 to 20mA or Voltage temperature transmitter for measurement of moisture saturated, stratified air across a duct with a humidifier or outside air intake to give
More informationMetal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam
Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,
More informationCTE7000 / CTU7000 Series Miniature pressure transmitters
FEATURES 10 mbar to bar, 0.1 to 7 psi gage 1 pressure 0..., 0...10, 0...4., 1...6 or 4...20 ma output Field interchangeable Rugged stainless steel housing EMC according to EN 61326-1 9 MEDIA COMPATIBILITY
More informationDuct Averaging Transmitters BA/T#-A Temperature Transmitter Installation & Operations
Overview The BA/T#-A is a flexible averaging duct mounted 4-20mA or Voltage transmitter probe. It comes in a variety of probe lengths and optional mounting enclosures shown below. The 4-20mA transmitter
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationEGQ 212: Duct transducer, CO 2 and temperature
Product data sheet 7.0 EGQ : Duct transducer, CO and temperature How energy efficiency is improved Measuring the CO concentration and temperature for energy-efficient, demand-controlled regulation of the
More informationTemposonics. G-Series Analog Redundant. Magnetostrictive Position Sensors. Redundancy for enhanced safety
Temposonics Magnetostrictive Position Sensors m SENSORS G-Series Redundant Temposonics GT2 and GT3 Measuring length 25-1500 mm Redundancy for enhanced safety Up to 3 totally separated, independent measuring
More informationCTE9000 / CTU9000 Series OEM pressure transmitters for industrial media
FEATURES mbar to 35 bar, 15 to 500 psi gage 1 or absolute 10 pressure 05, 010, 0545, 16 or 420 ma output Field interchangeable All welded stainless steel diaphragm construction EMC according to EN 61326-1
More informationJUMO MIDAS S05 Pressure transmitter Type
Data Sheet 40.00 Page /8 JUMO MIDAS S05 Pressure transmitter Type 4000 Brief description The JUMO MIDAS S05 pressure transmitter is available with both relative pressure and absolute pressure measurement
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More informationElectronic pressure switch with integrated analogue output
Electronic pressure switch with integrated analogue output RE 30276/03.1 Replaces: 03.06 RE 30275 1/6 Type HEDE 10 /1/ Component series 2X tb0002 Table of contents Contents Page Features 1 Ordering code
More informationFIRST FOR PORTABLE PARTICLE COUNTING
FIRST FOR PORTABLE PARTICLE COUNTING FS9V2-RH & FS9V2-RH-HP - particulate and relative humidity monitoring The FS9V2-RH Particle Pal displays live cleanliness readings for particulate (ISO/NAS/SAE) and
More informationJUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see "Technical data")
Page 1/15 JUMO dtrans p20 Process pressure transmitter Brief description The device with the HART interface combines maximum precision with simple operation. It is used to measure the system pressure of
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationSmart Pressure Transmitter
DOC. O.: C3700-L-E16A Smart Pressure Transmitter with Diaphragm Seal MODEL APT3700-L 298-29, GODA-RO, GUPO-SI, GYEOGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200 E-mail: autrol@duon.co.kr,
More informationSATRON VTe pressure transmitter
SATRON VTe pressure transmitter belongs to the series V-transmitters which will have both analog and smart properties. SATRON VTe is used for 0-4 kpa...0-00 MPa ranges. The transmitter communicates in
More informationDSL-240 MkIII Single Pass Dust Monitor Measures mg/m 3 using DDP
Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions
More informationBAPI-Stat 3 Room Sensor
Overview and Identification The BAPI-Stat 3 is a multiple output transmitter for temperature and humidity with setpoint capability for both and occupied/unoccupied override switching. The large easy-to-read
More informationPressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The pressure
More informationJUMO MIDAS S06. OEM-Pressure Transmitter Low Pressure. Applications. Brief description. Customer benefits. Special features
Delivery address: Mackenrodtstraße 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +9 66 600-0 Fax: +9 66 600-607 Harlow, Essex CM 0 DY, UK Phone: + 79 6 55 Fax: + 79 6 50 9 67 Myers Road
More informationOEM Pressure Transmitters
OEM Pressure Transmitters Type ECO-1 Applications Hydraulics and pneumatics Mechanical engineering General industrial applications Special Features Pressure ranges from 0-15psi to 0...15,000psi 4-20 ma
More informationSATRON VDt Differential Pressure Transmitter
SATRON VDt differential pressure transmitter belongs to V-transmitter family. The series V transmitters have both analog and smart properties. SATRON VDt is used for -,1kPa...-15 MPa ranges. It is a 2-wire
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationPressure transmitters for heavy duty applications MBS 8200 and MBS 8250
Data sheet Pressure transmitters for heavy duty applications MBS 8200 and MBS 8250 MBS 8200 is a series of compact pressure transmitters developed to withstand the pressure pulsations and vibrations known
More informationGeneral Information... Temperature/Resistance Table... Part Numbering Examples for RTD s. High Temperature MgO Elements (RA)...
Page General Information... Temperature/Resistance Table... Part Numbering Examples for RTD s High Temperature MgO Elements (RA).... Leadwire Style RTD s (RB).. Leadwire Style RTD s (RD, RE, RF, or RG
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationTemposonics. M-Series Analogue / SIL2* Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm
Temposonics Absolute, Non-Contact Position Sensors M-Series / SIL2* Temposonics MH Measuring Length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders Non-Contact
More informationJUMO dtrans p20 DELTA
Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision
More informationMicro-differential Pressure High-precision Digital Pressure Sensor For Gas DP-M SERIES
MODE 751 Micro-differential Pressure High-precision Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1469 ~ Sensor selection guide...
More informationJUMO thermocor. Portable measuring system for AMS2750 and CQI-9. Brief description. Block diagram. Special features. JUMO thermocor.
Page 1/8 JUMO thermocor Portable measuring system for AMS2750 and CQI-9 Brief description The JUMO thermocor is a high-precision documenting test device with 12 analog inputs for thermocouples. The use
More informationDMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
More informationIntrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS Technical brochure
Intrinsically safe presure transmitters for hazardous environments Type MBS 4201, MBS 4251, MBS 4701 and MBS 4751 Technical brochure Features Ex ll 1G EEx ia llc T4 - T6 in compliance with ATEX 100a Applicable
More informationTS Temperature Sensor and Transducers. Product Bulletin. Wide range of mounting types and signal outputs
TS-63000 Temperature Sensor and Transducers Product Bulletin The TS-6300 series temperature sensors provide an active and passive signal that corresponds to the air or water temperature in heating, ventilating
More informationINTERPLANT STANDARD - STEEL INDUSTRY. Specification for Smart Pressure & Differential Pressure Transmitter
INTERPLANT STANDARD - STEEL INDUSTRY IPSS Specification for Smart Pressure & Differential Pressure Transmitter Corresponding IS does not exist IPSS: 2-07-104-15 1. Scope 1.1 This Interplant Standard covers
More informationLevel and Flow Measurement. Sludge Finder 2
Level and Flow Measurement Sludge Finder 2 Sludge Finder 2 Sludge Finder 2 Is a proven effective sludge blanket interface monitor in both waste water and industrial applications. Sludge Finder 2 provides
More informationDifferential Pressure Sensors
1 910 1910P01 Differential Pressure Sensors for air or nonaggressive gases QBM66... Pressure-linear characteristic with selectable pressure measuring range Operating voltage AC 24 V or DC 13.5...33 V Output
More informationTemposonics. M-Series Analog. Magnetostrictive Position Sensors. Temposonics MH Measuring length mm SENSORS
Temposonics Magnetostrictive Position Sensors m SENSORS M-Series Temposonics MH Measuring length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, Absolute Measurement in Hydraulic Cylinders Contactless
More informationSIGNET Temperature Transmitter
SIGNET 83501 Temperature *38350.0901* English 38350.0901 Rev. G 3/06 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury.
More informationJUMO thermocor. Portable measuring system for AMS2750 and CQI-9. Brief description. Block diagram. Special features. JUMO thermocor.
sales@jumo.co.uk info.us@jumo.net Page 1/8 JUMO thermocor Portable measuring system for AMS2750 and CQI-9 Brief description The JUMO thermocor is a high-precision documenting test device with 12 analog
More informationActuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage
Data Sheet Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use Compact
More informationOutput signal active note. Measuring range rel. pressure. Electrical Data Power supply DC V, ±10%, 1.1 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges and outputs 0 to 5/10 V or 4 to 20 ma. NEMA 4X / IP65 rated enclosure. For monitoring the differential pressure
More informationABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet
Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive
More informationShort Form Catalogue AJ Thermosensors
Thermocouples Short Form Catalogue AJ Thermosensors Resistance thermometers Head mounted Probe style Application specific Accessories See the individual datasheets for more detailed information on each
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationZMT & ZFG2 Zirconia Oxygen Analyzer Systems. Superior technology and quality from the world leader in oxygen measurement
Data sheet DS/ZMT/LO EN Rev. J ZMT & ZFG Superior technology and quality from the world leader in oxygen measurement Integral reference-air supply option avoids necessity for additional equipment Dual
More informationTemperature Sensor without thread
1 Product Information TFP-49, -169, -189, -06 Temperature Sensor without thread Application / Specified Usage Authorizations Installation in thin-walled pipes and vessels No product contacting of the sensor
More informationTemposonics. M-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm
Temposonics Absolute, Non-Contact Positions Sensors M-Series Document Part Number 551218 Revision D Temposonics MT Measuring length 50-1500 mm Redundant Sensor for Mobile Hydraulics Redundant Sensor System
More informationDSL-220 MkIII Single Pass Opacity Monitor Measures 0-100% Opacity
Ideal for monitoring opacity and smoke levels in the exhaust gas of industrial combustion or air filtration processes. In situ measurement directly in exhaust gas flow using the widely accepted light transmission
More informationPPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 40
More informationDPI 620 Genii. Advanced Modular Calibrator and HART / Foundation Fieldbus Communicator. GE Measurement & Control
GE Measurement & Control DPI 620 Genii Advanced Modular Calibrator and HART / Foundation Fieldbus Communicator Combines an advanced multi-function calibrator and HART /Foundation Fieldbus communicator
More information