ELECTROMECHANICAL UNIVERSAL ROTARY TABLES FIBRO TOR

Transcription

1 ELECTROMECHANICAL UNIVERSAL ROTARY TABLES FIBRO TOR

2 NEW CONTROL CAM WITH INCREASED ENERGY EFFICIENCY SHORTEST DELIVERY TIMES... AND GREATEST RELIABILITY. They have it all formula. In the process, the service life please download all CAD data from TECHNICAL HIGHLIGHTS of the rotary tables amounts to 20,000 An extremely long life time and shortest hours MTTF (Mean Time To Failure). Our technical highlights - your competitive edge! cycle time with an excellent precision and no need for maintenance - these are Indeed, rotary tables may Highest transport loads with the shortest indexing times thanks to energy-efficient important aspects to any production line. be used as assembly tables; welding, design and large dimensioned axial needle bearing rotary tables combine all positioning or storing tables; in packa- Enormous rigidity and optimum crash behaviour thanks to cam rollers with friction bearings of them and offer as an additional highlight ging, printing, labelling or laser machines, Hardened and ground control cam provides best transfer of power up to five years warranty. as well as for chipping. and optimum motion sequence rotary tables work without the elastic Low subsequent costs thanks to lifetime lubrication for minimum maintenance The new generation with 20 % energy drive elements that tend to get worn Available with numerous additional options for different attachment and utilization options savings down and enable highly precise positio- ning and repeatability. Extremely short Thanks to its completely new developed positioning times ensure excellent UNIVERSAL POSITIONING FOR... control cam, energy consumption drops productivity. by 20 %. Alternatively, higher mass can General drive tasks, e.g. driving chain belts, as a control gear or as a storing table be moved, shorter indexing time can A large degree of standardisation and a Transporting and supplying tasks, e.g. for assembly, packaging, printing, labelling be realized or a smaller rotary table consistent modular design allow us and riveting applications can be used. This effect is possible due to deliver rotary tables Chipping, e.g. deburring, honing, drilling and light milling to an optimisation of the control cam with very short turnarounds. For an Non-machining processing, e.g. lasing, welding and bending according to the energy efficiency- optimal simulation of your system, 2 3

3 EM ER RT EM AND EM.NC PROPERTIES THREE STANDARD MODELS TO SUIT ANY JOB! Premium model of the universal rotary table with fixed division or for flexible positioning Custom manufacturing according to your individual application requirements Higher accuracies and shorter indexing times ER PROPERTIES A vast range of products FIBRO can offer you the suitable rotary table type for the application at hand, with the product range. FIBRO provides highly accurate solutions, specifically made to satisfy each customer's demands, from the EM line, or an attractively priced universal rotary table from the ER line, which serves as a great basic model and which can be supplied in short term thanks to a maximum degree of standardisation. The rotary indexing ring RT is perfect for any application which requires a centre hole. All rotary tables can be used horizontally and vertically. Cost-optimised, standardised model Sizes ER.10 to ER.13 with a delivery time of 2 weeks, as of ER.15, the delivery time is 4 to 6 weeks RT AND RT.NC PROPERTIES The rotary table with a large centre hole RT can also be supplied as a RT.NC model with flexible division 4 5

4 Frequency inverter with FIBRO-Software microprocessor control card FIBRODRIVE plus Additional table top and machine stand ADDITIONAL OPTIONS FOR ALL FREQUENCY INVERTER WITH FIBRO-SOFTWARE MICROPROCESSOR CONTROL CARD 5-year warranty! Pre-programmed sequences such as CW, CCW rotation or pendulum mode, soft start, specifically after emergency stop, rapid speed and creep speed Optimisation of the indexing times Less wiring effort Minimum brake wear Monitoring of the three-phase brake motor Microprocessor controlled and monitored functional sequence Autonomous functional sequence No time delay due to external cycles Fault monitoring Housing for mounting rail ADDITIONAL TABLE TOPS AND MACHINE STANDS FIBRODRIVE plus AC servomotor with integrated controller Autonomous operation - intelligent stand-alone solution including diagnosis function via LED Easy plug-in cable connection for logic and power supply No customer implementing required USB connection to the terminal block Teach-in function Simple handling, thanks to the intuitive program software FIBRO Servo-Link Balanced system with decentralised connection that requires no amplifier in the control cabinet Safety stop according to EN ISO Performance Level e Rotating additional table tops, fix plates at top and bottom manufactured specifically to customer requirements Standard machine stands and individual solutions In addition, we also supply centring rings as well as centring flanges for faster set up and more precise installation of your superstructures! 6 7

5 Media feedthrough, position detection and mechanical over-travel protection Smart position detection with electrical over-travel protection Strengthened table top bearing and hydraulic table top clamping ADDITIONAL OPTIONS FOR EM AND EM.NC POSITION DETECTION STRENGTHENED TABLE TOP BEARING Smart module for detection of the position of the table top Applicable as electrical over-travel protection Available for FIBROTOR EM and ER Protection class IP65 provides excellent protection against humidity and spray water Increases the process safety of your system For partial loading or for rotary machining to absorb the highest tilting moments Higher tilting moments on the positioned table top (+200 %) Higher tilting moments on the table top (+300 %) HYDRAULIC TABLE TOP CLAMPING MEDIA FEEDTHROUGH, POSITION DETECTION AND OVER-TRAVEL PROTECTION Media feedthrough for liquid or gaseous media and electrical signals Position detection at table top Over-travel protection to avoid cable breaks during pendulum mode When machining workpieces for the highest tangential loads Unload of drive elements Higher tangential moments (+250 %) 8 9

6 THE MOST IMPORTANT DATA AT A GLANCE. Rotary tables EM.10 EM.NC.10 ER.10 EM.11 EM.NC.11 ER.11 EM.12 EM.NC.12 ER.12 EM.13 EM.NC.13 ER.13 EM.15 EM.NC.15 ER.15 Transported load kg Main dimensions Table top diameter mm Overall height mm /125* Centre hole diameter mm 10 22* 35 35/70** 70 Weight approx. kg Load data Permitted add-on diameter mm Permitted axial load N Permitted radial load N Permitted tangential moment - standard EM + ER Permitted tangential moment EM.NC Standard divisions EM + ER EM Divisions up to EM.NC.divisions Accuracies EM + EM.NC EM indexing accuracy Division 2-12 above division 24 EM.NC indexing accuracy Direct measurement Indirect measurement Measurement on the motor ± 50 " ± 100 " ± 300 " ± 80 " ± 60 " ± 210 " any position ± 18 " ± 45 " ± 150 " ± 18 " ± 45 " Axial runout mm 0,02 0,01 0,01 0,01 0,015 Concentricity mm 0,02 0,01 0,01 0,01 0,015 Plane-parallelism mm 0,04 0,02 0,03 0,03 0,04 Accuracies ER ER indexing accuracy Division 2-12 Axial runout mm 0,02 0,015 0,02 0,02 0,03 Concentricity mm 0,02 0,015 0,02 0,02 0,03 Plane-parallelism mm 0,04 0,03 0,04 0,04 0,06 Additional options EM + EM.NC with strengthened table bearing Permitted tangential moment with table top clamping * for division 02, overall height 125 mm, eccentric centre hole ** division ø 35 mm, from division 06 and EM.NC ø 70 mm ± 60 " ± 70 " 200 ± 50 " ± 12 " ± 45 " ± 80 " Rotary tables EM.16 EM.NC.16 ER.16 EM.17 EM.NC.17 ER.17 EM.18 EM.NC.18 RT.12 RT.NC.12 RT.13 RT.NC.13 Transported load kg Main dimensions Table top diameter mm Overall height mm Centre hole diameter mm Weight approx. kg Load data Permitted add-on diameter mm Permitted axial load N Permitted radial load N Permitted tangential moment - standard EM + ER + RT Permitted tangential moment EM.NC + RT.NC Standard divisions EM + ER + RT *** EM + RT divisions up to EM.NC. and RT.NC divisions Accuracies EM + EM.NC bzw. RT. + RT.NC EM indexing accuracy Division 2-12 above division 24 EM.NC indexing accuracy Direct measurement Indirect measurement Measurement on the motor ± 12 " ± 18 " ± 60 " ± 15 " ± 50 " any position ± 15 " ± 12 "(T 4-20) ± 18 "(T 22-36) (über T36) ± 12 "(T 6-20) ± 18 "(T 22-36) (über T36) Axial runout mm 0,015 0,02 0,02 0,03 0,04 Concentricity mm 0,015 0,02 0,02 0,03 0,04 Plane-parallelism mm 0,04 0,04 0,04 0,06 0,08 Accuracies ER ER indexing accuracy Division 2-12 Axial runout mm 0,03 0,04 Concentricity mm 0,03 0,04 Plane-parallelism mm 0,06 0,08 Additional options EM + EM.NC with strengthened table bearing Permitted tangential moment with table top clamping *** RT.12 small division 04 not available, RT.13 small division 06 not available Subject to change without notice, status 11/

7 FIBRO GMBH A COMPANY IN THE =GROUP Business Area Rotary Tables Weidachstraße D Weinsberg T F info@fibro.de LÄPPLE AUTOMOTIVE.. FIBRO... FIBRO LÄPPLE TECHNOLOGY. LÄPPLE AUS- UND WEITERBILDUNG BRANCH OFFICE FIBRO France SARL Département Plateaux Diviseurs 26 Avenue de l Europe FR Schiltigheim T F info@fibro.fr FIBRO Inc. Business Area Rotary Tables 139 Harrison Avenue US-Rockford, IL T F info@fibroinc.com FIBRO ASIA PTE. Ltd. 9 Changi South Street 3, #07-04 Singapore T F info@fibro-asia.com FIBRO INDIA PRECISION PRODUCTS PVT. LTD. Regd. Office & Works Plot: A-55, Phase II, Chakan MIDC, Taluka Khed Pune T F info@fibro-india.com FIBRO (SHANGHAI) Precision Products Co., LTD. 1st Floor, Building 3, No. 253, Ai Du Road, Pilot Free Trade Zone Shanghai T F info@fibro.cn dated 11/2016