Standard and value-added costech frame fans with a comprehensive range of accessories
|
|
- Lionel Chambers
- 6 years ago
- Views:
Transcription
1 Standard and value-added costech frame fans with a comprehensive range of accessories
2 Technical specifications and D frame fans drawings drawing 1 drawing 2 drawing 3 drawing 4 drawing 5 drawing 6 drawing 7 drawing 8 description numbering system H T W 00 description MOTOR TYPE SING SIZE OPTIONS DESIGN ERING TYPE D blowers drawings drawing 9 drawing 10 SING THIKNESS ONNETION SPEED RTED VOLTGE
3 Index 04 Standard versions wide range of a.c. and d.c. frame fan types, available in standard and custom design 13 Special versions Dedicated solutions for high performance operation in particularly hostile ambient conditions and with adjustable speed control 14 IP25/IP55 frame fans 18 HTR and ll metal frame fans 20 Temperatured controlled frame fans 21 D fans with signal lead 22 ccessories complete set of standard fan accessories including plastic and metal fan guards, filters, rivets and power leads 28 IP protection degree table IP protection degree for enclosures of electrical equipment according to EN
4 General description General specifications costech standard frame fans broad selection of standard and custom designed models of axial and centrifugal frame fans, driven by a.c. shaded pole or capacitor motor, or alternatively with a brushless d.c. motor. vailable in various sizes, rated voltages and fan speeds, these fans cover the different requirements of electronics ventilation and meet tough specifications as to compactness, efficiency and cost effectiveness. Depending on the application, the frame fans can be fitted with either extremely durable ball bearings or with profitable sleeve bearing system, assuring smooth running. frame fans asing in black die cast aluminium alloy, except 22S (natural) Impeller in fibreglass reinforced PT or P, self-extinguishing UL 94V-0 Shaded pole or capacitor run induction motor Motors thermally protected or by impedance Performance data for all models at rated frequency of 50/60 Hz Operating temperature range: - all earing Sleeve earing Life L10 at 65% R.H.: - all earing 40,000 hrs at 40 20,000 hrs at T max - Sleeve earing 30,000 hrs at 40 15,000 hrs at T max Fans made in EU, hina or Taiwan vailable options: - IP55 protected (option F) - high temperature resistant (option T) - bi-directional flow (only for fans without shaded pole motor) - fans with impeller in steel - special voltage Modification of standard fans available on request, subject to quantity UL (Underwriters Laboratories) approved, anada/u.s.., file no. E VDE (Verband Der Elektrotechnik) approved for Europe E, in compliance with EN standard 04 D frame fans asing in black fibreglass reinforced PT, self-extinguishing UL 94V-0 except models D17 and D22S, made of die cast aluminium alloy Impeller in fibreglass reinforced PT or P, self-extinguishing UL 94V-0 rushless external rotor motor with auto-restart Motors protected by impedance and polarity inversion except models D12, D17 and D22 which are protected by Integrated ircuit against locked rotor and polarity inversion Operating temperature range: - all earing Sleeve earing Life L10 at 65% R.H.: - all earing 70,000 hrs at 40 40,000 hrs at T max - Sleeve earing 50,000 hrs at 40 35,000 hrs at T max Fans made in EU, hina or Taiwan vailable options: - third wire alarm detecting failure or locked rotor by I (option ) - third wire speed signal detecting failure or abnormal rotation (option S) - internal thermistor detecting temperature of air for speed variation (option I) - third wire detecting temperature for speed variation by external thermistor (option V) - digital PWM speed control (option M) - humidity protected (option H) - IP55 protected (option F) Modification of standard fans available on request, subject to quantity UL (Underwriters Laboratories) approved, anada/u.s.., file no. E E, in compliance with EN standard 05
5 frame fans frame fans xx earings Options X Freq. ir Flow pprovals xx earings Options X Freq. ir Flow pprovals (mm) (mm) (mm) No. Sleeve all (V a.c.) (Hz) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur VDE (mm) (mm) (mm) No. Sleeve all (V a.c.) (Hz) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur VDE 06G12HWF00 60x60x o /60 5/4 14/17 18/ /28.0 2,400/3,000 06G23HWF00 60x60x o /60 5/4 14/17 18/ /28.0 2,400/3, HWXF00 80x80x o o /60 14/11 36/41 40/ /35.0 2,600/3, HWXF00 80x80x o o /60 16/14 36/41 40/ /35.0 2,600/3, HWXF00 80x80x o o /60 14/12 41/51 40/ /36.0 2,500/3, LWXF00 80x80x o o /60 12/9 33/42 25/ /32.0 1,900/2, HWXF00 80x80x o o /60 14/12 41/51 40/ /36.0 2,500/3, LWXF00 80x80x o o /60 14/12 33/42 25/ /32.0 1,900/2, HTF00 172x150x o /60 29/29 348/ / /58.0 2,850/3, HWF00 172x150x o /60 32/28 290/ / /55.0 2,750/3, HWF00 172x150x o /60 35/30 290/ / /55.0 2,750/3, HTF00 ø 172x o /60 30/30 348/ / /55.0 2,850/3, HTF00 ø 172x o /60 29/29 348/ / /55.0 2,850/3,400 22S12HKD00 218x218x o /60 65/76 802/ / /63.0 2,160/2,310 22S23HKD00 218x218x o /60 83/93 836/ / /68.0 2,070/2,480 22S40HKD00 218x218x o / , HTXF00 92x92x o o /60 14/11 56/68 45/ /36.0 2,500/3, HTXF00 92x92x o o /60 16/14 56/68 45/ /36.0 2,500/3,000 = ir intake over struts = Without casing = pproved X = S (Sleeve) or (all) ( ) data with uncertainty of ± 15% 1212HTXF00 120x120x o o /60 14/11 110/130 52/ /42.0 2,400/2, HTXF00 120x120x o o /60 16/14 110/130 52/ /42.0 2,400/2, HTXW00 119x119x o o 24 50/60 14/14 133/167 60/ /49.0 2,650/2, STXW00 119x119x o o /60 22/20 161/195 82/ /50.0 2,700/3, HTXW00 119x119x o o /60 20/18 136/168 57/ /49.0 2,750/3, MTXW00 119x119x o o /60 16/15 126/133 52/ /46.0 2,500/2, VTXW00 119x119x o o /60 10/10 98/105 28/ /35.0 1,850/1,900 12R12HTXW00 119x119x o o /60 19/18 140/155 62/ /45.0 2,600/2, HTXW00 119x119x o o /60 20/19 148/182 65/ /49.0 2,750/3, MTXW00 119x119x o o /60 16/15 133/143 35/ /45.0 2,400/2, LTXW00 119x119x o o /60 11/10 114/102 27/ /42.0 2,200/1, VTXW00 119x119x o o /60 10/10 98/105 28/ /35.0 1,800/1, ETXW00 119x119x o o /60 6.5/6.0 85/83 19/ /28.0 1,500/1,450 12R23HTXW00 119x119x o o /60 18/18 140/155 62/ /45.0 2,600/2,950 12W12HWXW00 ø 113x M4 3 o o /60 20/18 150/167 66/ /48.0 2,650/2,950 12Z12HWXW00 ø 113x M4 3 o o /60 19/18 150/167 66/ /48.0 2,650/2,950 12W23HWXW00 ø 113x M4 3 o o /60 20/19 148/182 65/ /49.0 2,550/2,900 12Z23HWXW00 ø 113x M4 3 o o /60 18/18 148/182 65/ /49.0 2,550/2, HTXF00 127x127x o o /60 17/15 174/204 72/ /50.0 2,700/3, HTXF00 127x127x o o /60 17/15 174/204 72/ /50.0 2,700/3, HTF00 172x150x o /60 29/28 300/ / /58.0 2,850/3, HTF00 172x150x o /60 27/26 300/ / /58.0 2,850/3, HTF00 172x150x o /60 31/31 348/ / /58.0 2,850/3,
6 D frame fans D frame fans xx earings Options X Range ir Flow pprovals xx earings Options X Range ir Flow pprovals (mm) (mm) (mm) No. Sleeve all (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur (mm) (mm) (mm) No. Sleeve all (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur D20N01MWX00 20x20x o ,000 D20N01LWX00 20x20x o ,500 D20N04MWX00 20x20x o ,000 D20N04LWX00 20x20x o ,500 D20E01MWX00 20x20x o o ,500 D20E01LWX00 20x20x o o ,000 D20E04MWX00 20x20x o o ,500 D20E04LWX00 20x20x o o ,000 D02N01MWX00 25x25x o ,000 D02N01LWX00 25x25x o ,000 D02N04MWX00 25x25x o ,000 D02N04LWX00 25x25x o ,000 D02E01HWXZ00 25x25x o o ,000 D02E01MWXZ00 25x25x o o ,000 D02E04HWXZ00 25x25x o o ,000 D02E04MWXZ00 25x25x o o ,000 D03N01MWX00 30x30x o ,000 D03N01LWX00 30x30x o ,500 D03N04MWX00 30x30x o ,000 D03N04LWX00 30x30x o ,500 D03E01MWX00 30x30x o o ,000 D03E01LWX00 30x30x o o ,000 D03E04MWX00 30x30x o o ,000 D03E04LWX00 30x30x o o ,000 D35N01MWX00 35x35x o ,000 D35N01LWX00 35x35x o ,500 D35N04MWX00 35x35x o ,000 D35N04LWX00 35x35x o ,500 D04N01HWX00 40x40x o ,300 D04N01MWX00 40x40x o ,500 D04N04HWX00 40x40x o ,300 D04N04MWX00 40x40x o ,500 D04E01HWXT00 40x40x o o , D04E01MWXT00 40x40x o o ,800 D04E04HWXT00 40x40x o o ,000 D04E04MWXT00 40x40x o o ,800 D04E05HWXT00 40x40x o o ,000 D04E05MWXT00 40x40x o o ,800 D04F04HWX00 40x40x o o ,000 D04F04MWX00 40x40x o o ,000 D04F04LWX00 40x40x o o ,000 D04D04HWXZ00 40x40x o o ,800 D04D04MWXZ00 40x40x o o ,900 D04D05HWXZ00 40x40x o o ,800 D04D05MWXZ00 40x40x o o ,900 D45N01HWX00 45x45x o ,000 D45N01MWX00 45x45x o ,000 D45N04HWX00 45x45x o ,000 D45N04MWX00 45x45x o ,000 D45E01HWX00 45x45x o o ,500 D45E01MWX00 45x45x o o ,500 D45E04HWX00 45x45x o o ,500 D45E04MWX00 45x45x o o ,500 D50E04MWX00 50x50x o o ,300 D50E04LWX00 50x50x o o ,700 D50F04SWX00 50x50x o o ,500 D50F04HWX00 50x50x o o ,800 D50F04MWX00 50x50x o o ,300 D50F04LWX00 50x50x o o ,600 D06E01HWXT00 60x60x o o ,900 D06E01MWXT00 60x60x o o ,200 D06E04HWXT00 60x60x o o ,900 D06E04MWXT00 60x60x o o ,200 D06F01HWX00 60x60x o o ,500 D06F01MWX00 60x60x o o ,900 D06F04HWX00 60x60x o o ,500 ( ) data with uncertainty of ± 15% 09 13
7 D frame fans D frame fans xx earings Options X Range ir Flow pprovals xx earings Options X Range ir Flow pprovals (mm) (mm) (mm) No. Sleeve all (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur (mm) (mm) (mm) No. Sleeve all (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur D06F04MWX00 60x60x o o ,900 D06F05HWX00 60x60x o o ,500 D06F05MWX00 60x60x o o ,900 D06D04HWX00 60x60x o o ,500 D06D04MWX00 60x60x o o ,900 D06D04LWX00 60x60x o o ,500 D06D05HWX00 60x60x o o ,500 D06D05MWX00 60x60x o o ,900 D06D05LWX00 60x60x o o ,500 D0604SWX00 60x60x o o ,300 D0604HWX00 60x60x o o ,600 D0604MWX00 60x60x o o ,600 D0604LWX00 60x60x o o ,700 D0605SWX00 60x60x o o ,000 D0605HWX00 60x60x o o ,500 D0605MWX00 60x60x o o ,500 D0605LWX00 60x60x o o ,500 D0704HWX00 70x70x o o ,200 D0704MWX00 70x70x o o ,800 D0705HWX00 70x70x o o ,200 D0705MWX00 70x70x o o ,800 D08F01HWX00 80x80x o o ,200 D08F01MWX00 80x80x o o ,440 D08F04HWX00 80x80x o o ,200 D08F04MWX00 80x80x o o ,440 D08F05HWX00 80x80x o o ,400 D08F05MWX00 80x80x o o ,440 D08D04HWX00 80x80x o o ,100 D08D04MWX00 80x80x o o ,550 D08D05HWX00 80x80x o o ,100 D08D05MWX00 80x80x o o ,550 D0804SWX00 80x80x o o ,900 D0804HWX00 80x80x o o ,200 D0804MWX00 80x80x o o ,590 D0804LWX00 80x80x o o ,100 D0805SWX00 80x80x o o ,900 D0805HWX00 80x80x o o ,200 D0805MWX00 80x80x o o ,500 D0805LWX00 80x80x o o ,000 D09D04HWX00 92x92x o o ,700 D09D04MWX00 92x92x o o ,430 D09D05HWX00 92x92x o o ,700 D09D05MWX00 92x92x o o ,430 D0904SWXZ00 92x92x o o ,300 D0904HWXZ00 92x92x o o ,900 D0904MWXZ00 92x92x o o ,400 D0904LWXZ00 92x92x o o ,100 D0905SWXZ00 92x92x o o ,300 D0905HWXZ00 92x92x o o ,900 D0905MWXZ00 92x92x o o ,400 D0905LWXZ00 92x92x o o ,100 D1204SWXZ00 120x120x o o ,500 D1204HWXZ00 120x120x o o ,200 D1204MWXZ00 120x120x o o ,050 D1204LWXZ00 120x120x o o ,800 D1205SWXZ00 120x120x o o ,500 D1205HWXZ00 120x120x o o ,200 D1205MWXZ00 120x120x o o ,050 D1205LWXZ00 120x120x o o ,800 D12G04HWX00 120x120x o o ,750 D12G04MWX00 120x120x o o ,400 D12G04LWX00 120x120x o o ,000 D12G05HWX00 120x120x o o ,750 D12G05MWX00 120x120x o o ,400 D12G05LWX00 120x120x o o ,000 D12G07HWX00 120x120x o o , ( ) data with uncertainty of ± 15% 11
8 D frame fans General description earings pprovals xx Options X Range ir Flow (mm) (mm) (mm) No. Sleeve all (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur D1204SWXZ00 120x120x o o ,200 D1204HWXZ00 120x120x o o ,800 D1204MWXZ00 120x120x o o ,540 D1204LWXZ00 120x120x o o ,950 D1205SWXZ00 120x120x o o ,200 D1205HWXZ00 120x120x o o ,800 D1205MWXZ00 120x120x o o ,540 D1205LWXZ00 120x120x o o ,950 D1207SWXZ00 120x120x o o ,200 D1207HWXZ00 120x120x o o ,800 D1207MWXZ00 120x120x o o ,540 D1207LWXZ00 120x120x o o ,950 D1704HW00 172x150x o ,500 costech special frame fans The frame fans programme embraces special solutions with added value, designed specifically to withstand adverse external factors and to reduce energy consumption. The IP25 and IP55 fans give effective protection against hostile elements, such as dust, oil, humidity, water and salt fog spray. IP25 protection is achieved by coating the motor with a thin layer of varnish whilst the IP55 fans are more resistant to vibration and shock thanks to a special resin-bounded motor. Thanks to an all-metal construction and class F a.c. motor, the high temperature resistant (HTR) frame fans tolerate elevated heat conditions (up to +90 ), improving operational performance and reliability. This alternative design, with all-metal build instead of the plastic one also allows this type of fans, driven by an efficient a.c. external rotor motor, to better withstand particular environmental conditions by means of simple impeller modification. Equipped with a particular sensor, a special a.c. fan detects the changing ambient temperature and consequently auto-regulates its speed rotation, saving up energy and reducing acoustic noise during idle speed. D1705HW00 172x150x o ,500 D1707HW00 172x150x o ,300 D22S05HKD00 218X218X o , ,800 D22S07HKD00 218X218X o , ,800 D blowers xx earings Options X Range ir Flow pprovals (mm) (mm) (mm) No. Sleeve all (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur D6G04HWX00 75x75x o o ,000 D6G04MWX00 75x75x o o ,600 D6G05HWX00 75x75x o o ,000 D6G05MWX00 75x75x o o ,600 D1G04MWX01 120x120x o o ,300 D1G05MWX01 120x120x o o ,300 = Metal frame version available = Metal frame = pproved X = S (Sleeve) or (all) ( ) data with uncertainty of ± 15% 12 13
9 General specifications IP25/IP55 frame fans IP55 frame fans IP55 a.c. frame fans asing in black die cast aluminium alloy Impeller in fibreglass reinforced PT, self-extinguishing UL 94V-0 Shaded pole or capacitor run induction motor Motors thermally protected or by impedance Performance data for all models at rated frequency of 50/60 Hz Operating temperature range: - all earing Life L10 at 65% R.H.: - all earing 40,000 hrs at 40 20,000 hrs at T max Fans made in hina or Taiwan, some modified in Italy vailable options: - special voltage Modification of standard fans available on request, subject to quantity E, in compliance with EN standard IP25 and IP55 d.c. frame fans asing in black fibreglass reinforced PT, self-extinguishing UL 94V-0 Impeller in fibreglass reinforced PT, self-extinguishing UL 94V-0 rushless external rotor motor with auto-restart Motors protected by impedance and polarity inversion except model D12, which is protected by Integrated ircuit against locked rotor and polarity inversion Operating temperature range: - all earing (IP25 and IP55 versions) - Sleeve earing (IP25 only) Life L10 at 65% R.H.: - all earing 70,000 hrs at 40 40,000 hrs at T max - Sleeve earing 50,000 hrs at 40 35,000 hrs at T max Fans made in hina or Taiwan vailable options: - third wire alarm detecting failure or locked rotor by I (option ) - third wire speed signal detecting failure or abnormal rotation (option S) - internal thermistor detecting temperature of air for speed variation (option I) - third wire detecting temperature for speed variation by external thermistor (option V) - digital PWM speed control (option M) Modification of standard fans available on request, subject to quantity E, in compliance with EN standard = ir intake over struts = Without casing xx IP Rating Freq. ir Flow (mm) (mm) (mm) No. 55 (V a.c.) (Hz) (W) (m 3 /h) (Pa) [d()] (Rpm) 0812HWFF0 80x80x o /60 14/12 41/48 40/ /36.0 2,500/3, MWFF0 80x80x o /60 14/12 36/43 22/ /33.0 2,100/2, LWFF0 80x80x o /60 14/12 33/42 18/ /32.0 1,900/2, HWFF0 80x80x o /60 14/12 40/50 35/ /36.0 2,500/3, MWFF0 80x80x o /60 14/12 36/43 22/ /33.0 2,100/2, LWFF0 80x80x o /60 14/12 33/42 18/ /32.0 1,900/2, HWWF0 119x119x o 24 50/60 15/16 150/167 66/ /44.5 2,650/2, SWWF0 119x119x o /60 22/20 165/183 82/ /46.0 2,700/3, HWWF0 119x119x o /60 20/18 144/167 62/ /44.5 2,550/2, MWWF0 119x119x o /60 16/16 130/142 50/ /41.0 2,400/2, LWWF0 119x119x o /60 10/10 122/115 35/ /39.0 2,150/2,300 12R12HWWF0 119x119x o /60 19/18 140/155 62/ /45.0 2,600/2, SWWF0 119x119x o /60 22/21 165/183 82/ /46.0 2,700/3, HWWF0 119x119x o /60 20/19 144/167 62/ /44.5 2,550/2, MWWF0 119x119x o /60 16/15 130/142 55/ /41.0 2,400/2, VWWF0 119x119x o /60 10/10 98/105 28/ /39.0 2,150/2, LWWF0 119x119x o /60 10/10 122/115 35/ /39.0 2,150/2, EWWF0 119x119x o /60 6.5/6.0 83/81 19/ /27.5 1,500/1,450 12R23HWWF0 119x119x o /60 18/18 140/155 62/ /45.5 2,600/2,950 12W12HWWF0 Ø 113x M4 3 o /60 20/18 150/167 66/ /48.0 2,650/2,950 12Z12HWWF0 Ø 113x M4 3 o /60 19/18 150/167 66/ /48.0 2,650/2,950 12W23HWWF0 Ø 113x M4 3 o /60 20/19 148/182 65/ /49.0 2,550/2,900 12Z23HWWF0 Ø 113x M4 3 o /60 18/18 148/182 66/ /49.0 2,600/2,950 ( ) data with uncertainty of ± 15% 14 15
10 IP25 and IP55 D frame fans IP25 and IP55 D frame fans xx IP Rating Range ir Flow xx IP Rating Range ir Flow (mm) No (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) (mm) No (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) D04D04HWZX0 40x40x o ,800 D04D04MWZX0 40x40x o ,900 D04D05HWZX0 40x40x o ,800 D04D05MWZX0 40x40x o ,900 D0604SWX0 60x60x o o ,300 D0604HWX0 60x60x o o ,600 D0604MWX0 60x60x o o ,600 D0604LWX0 60x60x o o ,700 D0605SWX0 60x60x o o ,000 D0605HWX0 60x60x o o ,500 D0605MWX0 60x60x o o ,500 D0605LWX0 60x60x o o ,500 D0704HWX0 70x70x o o ,200 D0704MWX0 70x70x o o ,800 D0705HWX0 70x70x o o ,200 D0705MWX0 70x70x o o ,800 D0804SWX0 80x80x o o ,900 D0804HWX0 80x80x o o ,100 D0804MWX0 80x80x o o ,500 D0804LWX0 80x80x o o ,100 D1204SWZX0 120x120x o o ,500 D1204HWZX0 120x120x o o ,200 D1204MWZX0 120x120x o o ,050 D1204LWZX0 120x120x o o ,800 D1205SWZX0 120x120x o o ,500 D1205HWZX0 120x120x o o ,200 D1205MWZX0 120x120x o o ,050 D1205LWZX0 120x120x o o ,800 D1204SWZX0 120x120x o o ,200 D1204HWZX0 120x120x o o ,800 D1204MWZX0 120x120x o o ,540 D1204LWZX0 120x120x o o ,950 D1205SWZX0 120x120x o o ,200 D1205HWZX0 120x120x o o ,800 D1205MWZX0 120x120x o o ,540 D1205LWZX0 120x120x o o ,950 D1207SWZX0 120x120x o o ,200 D1207HWZX0 120x120x o o ,800 D1207MWZX0 120x120x o o ,540 D1207LWZX0 120x120x o o ,950 D0805SWX0 80x80x o o ,900 D0805HWX0 80x80x o o ,100 = Metal frame version available = only IP25 IP25 X = H IP55 X = F ( ) data with uncertainty of ± 15% D0805MWX0 80x80x o o ,500 D0805LWX0 80x80x o o ,100 D0904SWZX0 92x92x o o ,300 D0904HWZX0 92x92x o o ,900 D0904MWZX0 92x92x o o ,400 D0904LWZX0 92x92x o o ,100 D0905SWZX0 92x92x o o ,300 D0905HWZX0 92x92x o o ,900 D0905MWZX0 92x92x o o ,400 D0905LWZX0 92x92x o o ,
11 General specifications HTR and ll metal frame fans ll metal frame fans HTR frame fans asing in black die cast aluminium alloy Impeller in black painted steel Shaded pole motor with insulation system lass F Motors thermally protected or by impedance Performance data for all models at rated frequency of 50/60 Hz Operating temperature range: - all earing Life L10 at 65% R.H.: - all earing 40,000 hrs at 40 15,000 hrs at T max Fans made in Taiwan vailable Options: - special voltage Modification of standard fans available on request, subject to quantity UL (Underwriters Laboratories) approved, anada/u.s.., file no. E VDE (Verband Der Elektrotechnik) approved for Europe E, in compliance with EN standard ll metal and D frame fans asing in black die cast aluminium alloy Impeller in black painted steel Shaded pole or capacitor run induction motor Motors thermally protected or by impedance Performance data for all models at rated frequency of 50/60 Hz Operating temperature range: - all earing Life L10 at 65% R.H.: - all earing 40,000 hrs at 40 20,000 hrs at T max Fans made in EE and Taiwan vailable Options: - special voltage - Modification of standard fans available on request, subject to quantity UL (Underwriters Laboratories) approved, anada/u.s.., file no. E VDE (Verband Der Elektrotechnik) approved for Europe E, in compliance with EN standard xx Freq. ir Flow pprovals (mm) (mm) (mm) No. (V a.c.) (Hz) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur 0912HWM00 92x92x /60 12/11 75/87 59/ /42.0 2,700/3, HWM00 92x92x /60 12/11 75/87 59/ /42.0 2,700/3, HTM00 120x120x /60 17/15 151/175 64/ /46.0 2,700/3, LTM00 120x120x /60 17/15 107/114 25/ /35.0 2,000/2, HTM00 120x120x /60 17/15 151/175 64/ /46.0 2,700/3, LTM00 120x120x /60 17/15 107/114 25/ /35.0 2,000/2,050 17M12SWM00 172x150x /60 42/42 332/ / /53.0 2,800/3,250 17M23SWM00 172x150x /60 42/42 332/ / /53.0 2,800/3,250 17T12SWM00 172x150x /60 45/45 383/ / /61.0 2,750/3,150 17T23SWM00 172x150x /60 45/45 383/ / /61.0 2,750/3,150 25S12HKE00 280x280x /60 107/143 1,705/1, / /70.0 2,735/3,150 25S23HKE00 280x280x /60 114/158 1,705/1, / /70.0 2,735/3,150 25S40HKE00 280x280x /60 93/123 1,535/1, / /69.0 2,660/2,960 = ir intake over struts ( ) data with uncertainty of ± 15% xx HTR frame fans Freq. ir Flow pprovals (mm) (mm) (mm) No. (V a.c.) (Hz) (W) (m 3 /h) (Pa) [d()] (Rpm) UR cur 0912HWMT0 92x92x /60 12/11 75/87 59/ /42.0 2,700/3, HWMT0 92x92x /60 12/11 75/87 59/ /42.0 2,700/3,200 xx ll metal D frame fans Range ir Flow (mm) (mm) (mm) No. (V d.c.) (V d.c.) (W) (m 3 /h) (Pa) [d()] (Rpm) D25S05HKE00 280x280x , ,315 D25S07HKE00 280x280x , , HTMT0 120x120x /60 17/15 151/175 64/ /46.0 2,700/3, LTMT0 120x120x /60 17/15 107/114 25/ /35.0 2,000/2, HTMT0 120x120x /60 17/15 151/175 64/ /46.0 2,700/3, LTMT0 120x120x /60 17/15 107/114 25/ /35.0 2,000/2,050 17M12SWMT0 172x150x /60 42/42 332/ / /53.0 2,800/3,250 17M23SWMT0 172x150x /60 42/42 332/ / /53.0 2,800/3,250 17T12SWMT0 172x150x /60 45/45 383/ / /61.0 2,750/3,150 17T23SWMT0 172x150x /60 45/45 383/ / /61.0 2,750/3, = ir intake over struts ( ) data with uncertainty of ± 15% 19
12 General specifications Temperature controlled frame fans D fans with signal lead temperature controlled frame fans asing in black die cast aluminium alloy Impeller in fibreglass reinforced PT, self-extinguishing UL 94V-0 Shaded pole induction motor Motors impedance protected Operating temperature range: - all/sleeve earing Life L10 at 60% R.H.: - all/sleeve earing 50,000 hrs at 25 Fan speed control by thermal sensor Internal or external temperature sensor version D fans with speed sensor signal The integrated electronic sensor provides a square wave signal proportional to the fan speed. The signal is via a third lead wire (open collector type). D fans with alarm signal It is used to detect if the fan is still rotating or stopped. The output is via a third lead wire (open collector type) and it is a continuous high or low signal depending on the fan's type. Output Waveform ontrol Output Waveform larm Signal LOK LOK RELESE LOK LOK RELESE temperature controlled frame fans Supply voltage Fan rotation Fan current Locked signal T T T 10 SE T 10 SE IF LOKED MYE HIGH OR LOW VOH VOH VOL VOL The ouput waves may change depending on the fan type. For more information, contact our Sales Dept. Electrical diagram xx F ØD earings Options X Freq @2600rpm FN USTOMER S IRUIT V 1223HWXI0 1223HWXV0 X = S (Sleeve) or (all) case sensor ext. sensor (mm) (mm) (mm) No. Sleeve all (V a.c.) (Hz) (W) (m 3 /h) (Pa) [d()] (Rpm) 120x120x o o ,450 2, x120x o o ,450 2,600 Q1 Vo Ic Locked Signal GND 20 External signal function design is decided by customer. 21
13 ccessories ccessories Metal Fan Guards Purpose of the product: Moving parts protection, according to EN ISO and EN ISO standards. IP20 protection degree, according to EN Standards Size available: ll axial frame fan sizes. ring distance: 6.35 mm Material: Steel wire ISI 1010 Finishing: Nickel-hrome plated (standard) or black epoxy painted RL 9005, on request Ø Ø Ø Plastic Fan Guards Purpose of the product: Moving parts protection, according to EN ISO and EN ISO standards. IP20 protection degree, according to EN Standards Size available (in mm): For axial frame fan sizes 40x40, 60x60, 80x80, 92x92, 120x120, 172x150 and Ø 172. ring distance: From 3 mm to 6 mm Material: Self-extinguishing S/P alloy, according to UL 94V-0 Standard colour: lack RL Other colours are available on request, subject to quantity Ø D 2 PLES Ø D 2 PLES Ø D 2 PLES Ø Ø D 4 PLES 74.2 Drawing 1 Drawing 2 Drawing 3 Drawing Ø 4.5 Ø PLES 4 PLES Drawing 1 Drawing 2 Drawing Dimension Dimension Dimension Drawing Dimension Dimension Dimension Dimension D No. ø mm mm mm ø mm No. mm mm mm G G G G G G D Ø E S Metal fan guard Purpose of the product: Moving parts protection, according to EN ISO and EN ISO standards. Optionally it can be coupled with a metal filter. Size available (in mm): For axial fax sizes 120x38 mm ring distance: 5 mm Material: Steel plate Painting type: Epoxy powder coating Standard colour: RL 7035 Dimension Dimension Dimension Dimension D Dimension E ø mm mm mm mm mm GMP200NK GMP250NK Ø 4 4 PLES Dimension Dimension Drawing 2 Dimension Ø 23 mm mm mm 22 G120M
14 ccessories ccessories Fast ssembly Plastic Fan Guards Purpose of the product: Moving parts protection, according to EN ISO and EN ISO Standards. IP20 protection degree, according to EN Standards Fast assembly Size available (in mm): For axial frame fan sizes 120x120. ring distance: 5 mm Material: Self-extinguishing S according to UL 94H Standard colour: lack RL Other colours are available on request, subject to quantity Metal Filters Purpose of the product: IP40 protection from the moving parts and dust intrusion plus EMI/RFI shielding Size available (in mm): For axial frame fan sizes 60x60, 80x80, 92x92, 120x120, 172x150 and Ø 172 Material: - Net: 30x30 stainless steel corrugated mesh with 4.8 mm pitch and 3.3 mm depth - Frame: aluminium olour: Natural E Ø Ø Plastic Filters Purpose of the product: IP30 protection from the moving parts and dust intrusion Size available (in mm): For axial frame fan sizes 40x40, 60x60, 80x80, 92x92,120x120, 172x150 and Ø 172 Material: - Plastic parts: black RL 9005 self-extinguishing S/P alloy, according to UL 94V-0. Other colours are available, subject to quantity - Filter media: white organic and synthetic fibres (polyester and polypropylene) heat bounded - Net: natural colour fibreglass wiring Ø 0.28 mm, 18x16 mesh Dimension Dimension Dimension Dimension D Dimension E mm mm mm ø mm mm G120/S Note: to know the plastic filters mounting cut-out, see the plastic fan guards drawings Dimension Dimension mm mm F40/MR F60/MR F80/MR F92/MR F120/MR F150/MR Ø PLES Ø150 ± 0.76 Drawing 1 Drawing 2 Drawing Dimension Dimension Dimension No. mm mm mm FM/ FM/ FM/ FM/ FM/ Elastic Rivets Purpose of the product: Fast assembly and disassembly of the fans plus vibration and noise reduction Size available: Suitable for fans with dimensions between 60 mm and 127 mm and fixing hole diameter from 4 mm to 4.6 mm Operating temperatures: Material: EPDM rubber, 63 shore hardness olour: lack : ER4401N Ø 8 Ø Ø 3 Ø
15 ccessories ccessories Plastic Rivets Purpose of the product: Fast assembly of the fans and fan guards Size available: Suitable for fans with fixing hole diameter from 4 mm to 4.8 mm Versions available: With round flat head or V-shaped head. Two different stem lengths, 17 mm and 22 mm Extraction force: (hole Ø stem 4 mm length) 16 N (hole Ø stem 10 mm length) 45 N Note: Drill holes (Ø 5.4 : 6.5 mm) on the panel and introduce the rivets Material: Self-extinguishing nylon 6, according to UL 94V-0 olour: lack RL 9005 or grey RL 7032 Ø D Ø D Fan Leads Purpose of the product: Quick connection or disconnection of fans with standard terminal male plugs Versions available: - Straight plug connection (drawing 1 ) - 45 plug connection (drawing 2 ) - Daisy hain plugs for multiple connections (drawing 3 ) able lengths available: For the first two versions, see the standard lengths in the boxes below. Other lengths are available on request, subject to quantity. For the Daisy hain version standard lengths do not exist able type: Flat flexible wire without sheath, H03VH-H according to EI or equivalent. Other types are available on request, subject to quantity Plug material: Self-extinguishing PV olour: lack Ø Ø 8 Ø Ø 8 Straight version Round flat head V-shaped head L (xx) Length of cable L mm Round flat head version Dimension Dimension Dimension Dimension D RL colour mm mm mm mm FR 175 TP N lack 7.9/8 STRIGHT VERSION drawing , , , ,000 FR 175 TP R Grey FR 225 TP N lack 45 version FR 225 TP R Grey 7.9/8 Length of cable L mm V-shaped head version Dimension Dimension Dimension Dimension D RL colour mm mm mm mm FR 175 TS N lack 45 VERSION drawing 2 L (xx) , , ,540 FR 175 TS R Grey FR 225 TS N lack FR 225 TS R Grey View from ϒ 7.9/ "DISY HIN" PLUGS FOR MULTIPLE ONNETIONS drawing 3 27
16 General information Note "IP" protection degree table Protection degree against solid foreign object and against access to hazardous parts (1 st numeral) Protection degree against water (2 nd numeral) IP Symbol IP Symbol Description Description 0 non-protected 0 non-protected 1 protected against solid foreign objects of 50 mm Ø or greater and against access to hazardous parts with the back of a hand 1 protected against erticall falling water drops 2 protected against solid foreign objects of 12.5 mm Ø or greater and against access to hazardous parts with a finger 2 15 protected against erticall falling water drops at an angle up to 15ϒ 3 protected against solid foreign objects of 2.5 mm Ø or greater and against access to hazardous parts with a tool 3 60 protected against spra ing water at an angle up to 0ϒ from the ertical 4 5 protected against solid foreign objects of 1.0 mm Ø or greater and against access to hazardous parts with a wire dust-protected and protected against access to hazardous parts with a wire protected against splashing 4 water from an direction protected against water jets from an direction dust-tight and protected against access to hazardous parts with a wire protected against powerful 6 water jets from an direction 360 Symbol and description according to rule EI EN LL SPEIFITIONS, DT ND DRWINGS RE SUJET TO HNGE WITHOUT NOTIE ND RE PPROXIMTE. 29
17 Printed July LIMITED LIILITY ND WRRNTY DISLIMER The Manufacturer hereby makes no representation or warranties expressed or implied, statutory or otherwise. ll implied warranties, including those of merchantability or fitness for use are hereby disclaimed. The product is made in conformity with the cogent standards provided for by European Health and Safety legislation. Where expressly indicated, the product conforms to the standard of Safety and Performance defined by recognised international bodies and subject to their periodic verification. ny loss or damage, both incidental and consequential, for any failure to perform or delay to perform due to wrong use or wrong installation of the product, as well as to the non-observance of technical specifications, are not covered by the Manufacturer s warranty. The buyer alone is responsible to determine the suitability of the product. The data indicated in the catalogue is purely indicative. The product is subject to wear. Electrical connections must be carried out in compliance with pertinent national, state or local health and safety laws. If the apparatus in which the product is incorporated should guarantee continuous use without variation or interruption in performance, the product must be utilised only in the presence of a device which immediately signals any functional anomaly or arrest, allowing immediate intervention or the activation of an auxiliary product. If installed and/or integrated in other apparatus, the use and maintenance manual of the apparatus must also indicate the correct use of our product and its working characteristics and must prescribe its estimated life, before the product actually reaches the maximum working hours shown in the data sheets, that is to say, taking account of all the specific conditions of use and of the technical specifications supplied and must supply exhaustive information allowing the user to substitute the product (removal & substitution). ny fan found to be defective within the limits of the warranty, will be replaced free of charge. osts of labour or other extra subsequent costs relative to the removal, restitution or new installation of the fan are not covered by the product warranty.
18 olors of engineering. Fandis is an international point of reference for consultation and technological engineering, activities applied to the two usiness Units: Screen Solutions, solutions and products for domestic and commercial screen systems; Thermal Solutions, solutions and products for temperature management and control in industrial, professional and domestic applications. Forever oriented to service excellence, Fandis quality is certified for the entire process of production and research into the design of advanced solutions. Fandis today, thanks to experience accumulated over more than 25 years of activity, provides a valued technological partnership for all its clients. MT-01/5_e_ventcompatti_0713_LTP Fandis S.p.. Via per astelletto 65/69, orgo Ticino (NO) - Italy Tel Fax info@fandis.it -
Standard and value-added costech frame fans with a comprehensive range of accessories
Standard and value-added costech frame fans with a comprehensive range of accessories Technical specifications A and D frame fans drawings D blowers drawings numbering system description A 12 B 23 H T
More informationStandard and value-added costech frame fans with a comprehensive range of accessories
Standard and value-added costech frame fans with a comprehensive range of accessories Technical specifications A and D frame fans drawings drawing 1 drawing 2 drawing 3 drawing 4 drawing 5 drawing 6 drawing
More informationAC Fans. AC Fans Overview 117. AC Axial Fans 118. AC Radial Fans 138. Technology. DC Axial Fans. DC Radial Fans. Specials. ACmaxx Axial Fans.
4 AC Fans AC Fans Overview 7 AC Axial Fans 8 AC Radial Fans 38 AC Radial Fans AC Axial Fans AC Fans ACmaxx Axial Fans Technology DC Axial Fans Specials DC Radial Fans 5 Accessories AC Fans Technical Informations
More informationCross-flow Fans. TFD/FFD Series
Cross-flow Fans TFD/FFD Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
More informationCross-Flow Fans. TF/FF Series
Cross-Flow Fans TF/FF Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
More informationProduct Data Sheet ACi 4420 HHR
ACi 4420 HHR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 4 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 5
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A - up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics
More informationDesign details Design. Installation types. Shaft seal. Impeller type. Drive. Bearings
ma-porter ode Description Starting aid 1) Without start capacitor With start capacitor 5 Size 5 DN 6 DN 65 01 Impeller size SE Motor version SE Single-phase motor with float switch NE Single-phase motor
More informationA6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
More informationProduct Data Sheet ACi 4420 MLR
ACi 4420 MLR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 4 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 5
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationProduct Data Sheet 632 NU-006
The engineer's choice 632 NU-006 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationProduct Data Sheet 4184 N/17X. The engineer's choice
Product Data Sheet 4184 N/17X The engineer's choice 4184 N/17X INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical
More informationProduct Data Sheet 3214 JH3-195
3214 JH3-195 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 6
More informationIn-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
More informationAC and DC Axial Fans Part Numbering Guide
and D xial Fans ing uide xample: for D Fan FD1 025BMW11 FD 1 0 25 B M W 1 1 99 SRIS FD: D Fans F: Fans up to mm FK: Fans mm and above FN TYP 1: xial 3: hip ooler 2: xial apacitor Motor 4: Blower Fan FN
More informationnext dx next dx rcgroupairconditioning NEXT DX: Direct expansion close control air conditioners equipped with scroll compressors and Plug-fans.
NEXT DX: Direct expansion close control air conditioners equipped with scroll compressors and Plug-fans. Cooling Capacity: 6,4 97,4 next dx C rcgroupairconditioning R410 E C UP FLOW DOWN FLOW MIN FETURES
More informationProduct Data Sheet 8412 NHU-519
The engineer's choice 8412 NHU-519 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationsupplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
More informationProduct Data Sheet DV5214 NU
The engineer's choice DV5214 NU INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationProduct Data Sheet 614 N/2HH-169 The engineer's choice
The engineer's choice 614 N/2HH-169 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
Load break switches SIRCO PV IEC 609473 new The solution for > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationProduct Data Sheet 4414/2H
The engineer's choice 4414/2H INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationProduct Data Sheet 8414 NGH
The engineer's choice 8414 NGH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationAC axial fans, AC diagonal fans
fans, C diagonal fans Technology ccessories EC-SYSTEMS ESM General information K series Q-motor EC axial EC axial fans series fans fans Ø 130 - Ø 250 14 C diagonal fans Ø 208 20 13 Contacts fans Ø 130
More informationProduct Data Sheet 4118 N/ The engineer's choice
The engineer's choice 4118 N/12-190 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical
More information4 submersible pumps powered by renewable energy sources
submersible pumps powered by renewable energy sources ENGLISH TCH technology applied to renewable energy The pumps, owered by renewable energy sources, is a new range coming from the TCH pumps with built-in
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationProduct Data Sheet 3214 J/2H3F-191
The engineer's choice 3214 J/2H3F-191 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationProduct Data Sheet 624 NR. The engineer's choice
Product Data Sheet 624 NR Product Data Sheet 624 NR The engineer's choice Product Data Sheet 624 NR 624 NR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data...
More informationF-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
More informationTechnical Documentation Radial Pump with Canned Motor Y-1638-MM
Technical Documentation Radial Pump with Canned Motor Y-1638-MM Technical Documentation Radial Pump with Canned Motor Y-1638-MM 816 847 816 847 230 230 210 210 310 310 Sleeve Bearing: Iglidur Sleeve Bearing:
More informationSIRCOVER. Manual Transfer Switching Equipment from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for.
Transfer switches svr_151_a The solution for > Manufacturing > Power distribution SIRCOVER 250 Strong points svr_214_a > Complete range > Easy to connect > Stable positions > On-load switching Conformity
More informationProduct Data Sheet 8412 N/ The engineer's choice
The engineer's choice 8412 N/12-252 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical Interface - Output...
More informationTechnical Documentation Regenerative Turbine Pump with Canned Motor Y-2951-W-MM
Technical Documentation Regenerative Turbine Pump with Canned Motor Y-2951-W-MM Technical Documentation Regenerative Turbine Pump with Canned Motor Y-2951-W-MM Description Hermetically sealed centrifugal
More informationInformation. DC axial fans. DC axial fans. DC axial fan overview 27 DC axial fan / DC diagonal fan
Information DC axial fan overview 27 DC axial fan / DC diagonal fan 31 25 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans Technical
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationLowest Cost Louvered Filter Fan Kits. Highest Airflows In The Smallest Packages
Lowest Cost AC Fan Monitoring System At $37.50, the AFM Series is the lowest cost solution for indicating positive or negative airflow in AC or DC fan/blower applications in servers, telecom switches,
More informationGE Industrial Solutions. New. QuiXtra 4000ED.02. Low Voltage Distribution Boards up to 4000A. GE imagination at work
GE Industrial Solutions New Quitra 4000ED.02 Low Voltage Distribution oards up to 4000 GE imagination at work Quitra 4000 Quitra 4000 is a range of sheet steel system enclosures, delivered as a flat kit:
More informationProtection against mechanical impacts IK 08 according to IEC 68, EN Insulation class Class F (155 C), class H (180 C) on request.
MVSI The MVSI series represents the line of reference products for manufacturer s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market,
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationImmersion Pumps PRG sealless
Immersion Pumps PRG sealless 1-6007-US Centrifugal pumps of plastic for clear or turbid fluids Technical data Delivery rate Q max = 60 l/min Delivery head H max = 32 m Temperature range 20 C to +60 C Product
More informationMTF. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz
More information13.1. Range of Enclosures. KRONECTION Box A 2 for up to 2 pairs. Expert Knowledge. Short survey of the KRONECTION Box A 2 for up to 2 pairs
KRONECTION Box A 2 for up to 2 pairs Short survey of the KRONECTION Box A 2 for up to 2 pairs The KRONECTION Box A 2, which is equipped with connection contacts on the right and left, serves as a line
More informationOperation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping)
Safety-door Switch D4BS The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment CSM_D4BS_DS_E_6_1
More informationSIRCO PV UL98B Load break switches for photovoltaic applications from 100 to 2000 A, up to 1500 VDC
Load break switches sircopv_058_a cat SIRCO PV UL98 new sircopv_059_a cat The solution for > Combiner box > Recombiner box > Inverter Function SIRCO PV UL98 non fusible disconnect switches are heavy duty
More informationEnd Suction Range MARCH 2018
End Suction Range MARCH 2018 INDEX QB Peripheral Vane Pump... 4 Performance Data... 5 CPM Single Stage Pumps... 6 2CPM Twin Stage Pump... 10 Performance Data... 11 JSWM Self-Priming Jet Pump... 12 Performance
More informationProduct Data Sheet DV4118 N
The engineer's choice DV4118 N INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More informationSIRCO PV IEC Load break switches for photovoltaic applications from 100 to 3200 A, up to 1500 VDC
SIRCO PV IEC 609473 The solution for Load break switches > Combiner box > Recombiner box > Inverter sircopv_058_a_1_cat sircopv_059_a_1_cat Strong points Function SIRCO PV are manually operated multipolar
More informationCatalog Issued 3-03 (PDF Rev )
W6/W9 series Magnetic Hydraulic P& Circuit reakers Features Designed for the international market. UL Recognized (UL77 and UL5), CS ccepted and VDE approved. Ratings to 5 amps. Heavy duty #-32 stud connections.
More informationTechnical Documentation Radial Pump with Canned Motor MY-3-MM
Technical Documentation Radial Pump with Canned Motor MY-3-MM Technical Documentation Radial Pump with Canned Motor MY-3-MM Description Hermetically sealed centrifugal pump with canned motor. Impeller
More informationUnimotor. Control Techniques Dynamics. Brushless.. AC Servo. Motors...
Unimotor rochure ontrol Techniques ynamics rushless Servo Motors UNIMOTOR haracteristics Introducing Unimotor Unimotor is a range of brushless servo motors from T ynamics They are three phase, 6 or 8 pole,
More informationproduct specification
4414 ML Customer specification: No Version: 1.0 Created: 16.09.2011 INDEX 1 General... 2 2 Mechanics... 2 2.1 GENERAL... 2 2.2 MOTOR... 2 2.3 CONNECTIONS... 3 3 Operating Data... 4 3.1 OPERATING DATA -
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationApplicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC
Solid State Relays G3NB with 40-A output at a reasonable price. Switches 9 A without a heat sink. Zero cross function enables less noise operation. Built-in varistor effectively absorbs external surges.
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More information4 submersible pumps with integrated electronics powered by renewable energy sources ENGLISH
submersible pumps with integrated electronics powered by renewable energy sources ENGLISH HS technology applied to renewable energy HS MultiPower pumps (HS MP), powered by renewable energy sources, is
More informationTD-SILENT Series (160 to 1000 models)
IN-LINE MIXED LOW DUT ANS ultra-quiet Series (1 to models) Low profile Mixed-flow fans with sound-absorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD-3, TD-, TD-8 and
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More information4314/17T. Product Data Sheet INDEX
4314/17T INDEX 1 General... 2 2 Mechanics... 2 2.1 General... 2 2.2 Connections... 2 3 Operating Data... 2 3.1 Operating Data - Electrical Interface - Input... 3 3.2 Electrical Operating Data... 4 3.3
More informationEnergy Saving Three Phase Motors
e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality
More informationODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME
More informationVENTILATION. Filter Fans. Example: Waste heat to be removed 500W Temperature difference 20K Air flow required 78m3/hr
Filter Fans High performance and fast mounting Modern design A positive visual impact is given by the up-to-date design of the grills and the minimal external projection. All moulded parts are made of
More informationCENTRIFLOW 3D WITH EC MOTOR >> Technical catalogue
CENTRIFLOW 3D Plug Fan WITH EC MOTOR >> Technical catalogue air comfort CentriFlow 3D 2 GMEC CentriFlow 3D - Technical Catalogue Contents GENERL Description and survey chart pplication... 3 General Survey
More informationOperating voltage 120, 230 V AC Air volume 24 m³/h (14.1 CFM) Rated power 13 W Size 1
7F Series - Filter Fan (24 500) m³/h (14.1...294.3) CFM 7F Features 7F.50.8.xxx.1020 7F.50.8.xxx.2055 7F.50.8.xxx.3100 Filter Fan for electrical cabinets and enclosures 120 V or 230 V AC versions Very
More informationCORE VALUES TECHNOLOGIES ESS-ESD PRODUCT CATALOGUE Enjoy the peace of mind ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT
TECHNOLOGIES ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT Enjoy the peace of mind ESS-ESD PRODUCT CATALOGUE CORE VALUES PEACE OF MIND EFFICIENCY FAIRNESS RESPONSIBILITY CUSTOMER ORIENTATION GROWING DEVELOPED
More informationJM Aerofoil Multi-Stage 50 Hz
JM Aerofoil Multi-Stage 5 Hz JM AEROFOIL - MULTI-STAGE CONTENTS Page: JM Aerofoil Multi-Stage - Introduction -5 Multi-Staging Motor Frame Size Schedules - Three Phase 7-8 Performance Curves SK1- SK135
More informationElectric Immersion Pumps PRT and PRA, sealless
PRT and, sealless MQUALITY MANAGE ENT Centrifugal pumps of plastic for a wide variety of industrial fluids Technical data Delivery rate Q max = 20 l/min Delivery head H max = 32 m Temperature range -30
More informationProduct Data Sheet 4184 NGX
The engineer's choice 4184 NGX INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationProduct Data Sheet 8314 HR-197
The engineer's choice 8314 HR-197 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationMTF-E. Technical features
Technical features Power supply Threephase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with a PM inverter from 20Hz to the base frequency with constant torque load profile. Polarity 2 and
More informationIP66 GSW GEAR BOX MOTOR SERIES
IP66 GSW GEAR BOX MOTOR SERIES Three Phase Aluminium Gear Box Motors Australian Version October 2013 CONTENTS INTRODUCTION Pg 3 MATERIALS AND CONSTRUCTION Pg 3-4 SERIES OVERVIEW Pg 5 PERFORMANCE DATA Pg
More informationSINGLE PHASE TEFC CAGE MOTORS
SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current
More informationDuct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
More informationAir volume 24 m³/h (14.1 CFM) Rated power 13 W Size (14.1) 55 (32.4) 100 (58.9) Air volume (with exhaust filter installed)
Series - Filter Fan (24 500) m³/h (14.1...294.3) CFM 7F 7F.50.8.XXX.1020 7F.50.8.XXX.2055 7F.50.8.XXX.3100 Filter Fan for electrical cabinets and enclosures 230 V or 120V AC versions Very low acoustic
More informationTYPE 2 poles 4 poles 6 poles 8 poles 2 / 4 poles 4 / 8 poles 2 / 8 poles 4 / 16 poles
BAH-BAHS series Overwiew MGM Electric Motors was established in 1950 as a brake motors manufacturer. MGM is today a world leading manufacturer of this line of products. MGM brake motors are designed and
More informationROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch CSM DS_E_3_1 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The world's
More informationPLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationEMUJC Series. Electronic actuator. Technical Data Sheet. WattsIndustries.com
EMUJC Series Electronic actuator Technical Data Sheet WattsIndustries.com Description Watts Water Technologies, Inc. The actuator EMUJC Series is an electronic device with 3-point or proportional control
More informationAXIAL FAN WITH EXTERNAL ROTOR MOTOR
XIL FN ITH EXTERNL ROTOR MOTOR 1. YF series axial fans are external rotor motors. These motors have characteristics of compact structure, convenient installation and high efficiency etc. 2. YF series external
More informationMVSI-TS. Split covers. Technical features
MVSI-TS Split covers The MVSI-TS series, obtained directly from the MVSI series, is characterized by the split weight covers. The weight cover is divided into two halves that can be removed in a radial
More informationCPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm
95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide
More informationContents. Fans. Page. Make Farnell-Newark InOne your first choice - search over 300,000 products at
Farnell Page 709 Date: 18-08-06 time:16:26 Contents Page Accessories 7 Axial Flow - Low Vltage dc 714 Axial Flow - Mains ac 710 Backward Curved 720 Blowers 721 Fan Speed Controllers 723 Flatpack 720 High
More informationCentriflow Plus EC. Technical data
Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6
More informationMTD Silent Series MIXED FLOW IN-LINE DUCT FAN
MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General
More informationD4BS CSM_D4BS_DS_E_8_4
Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment
More informationHammond Electronic Rack Packaging
Hammond Electronic Rack Packaging 195 1 4-20 spring loaded nuts and 0.62 round head slotted bolts and washers for C channels. Description Net Price l 1421S Pkg. of 4 $14.82 CABLE ORGANIZING RING PANELS
More informationCONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
More informationLARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
More informationSIRCOVER. Manual transfer switches from 125 to 3200 A. Transfer switches. Function. Advantages. The solution for. Strong points
Transfer switches svr_151_a The solution for > Manufacturing industry > Power distribution SRCOVER 2 Strong points > complete range > Easy connections > Stable positions svr_125_a_1_cat Bypass TS 0 Conformity
More informationOpen continuous current (DC) motors MS 1 - MS 2. General information
MS 1 - MS 2 General information Open continuous current (dc) motors conforming to the IEC specifications. MS 1 : - frame size 80 to 132 mm, - power 0.44 to 8.85 kw. MS 2 : - frame size 112 and 132 mm,
More informationVORTICENT C E RANGE Centrifugal fans
NEW VORTICENT C E RANGE Centrifugal fans Suitable for domestic, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars,
More informationAXIAL FLOW CABINET FAN CGT Series
Range of adjustable pitch aerofoil blade, axial flow cabinet fans. Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25 mm thickness fireproof fibreglass acoustic insulation
More informationSabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
More informationTF037C MICRO BLOWERS FEATURES STANDARD SPECIFICATIONS
FEATURES Aerodynamic bearings Compact / Light weight High static pressures Low vibration Long life due to aerodynamic bearings without heat dependence Two type available with or without mounting bracket
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS CONTACT BLOCKS FR FX FK FW 5 6 7 11 1 14 NC NC
More informationD4GS-N CSM_D4GS-N_DS_E_7_2
Slim Safety Door Switch D4GS-N CSM_D4GS-N_DS_E_7_2 Slim Safety Door Switches with IP67 Rating Slim design with a width of only 17 mm (three-contact models). Reversible design allowing either front or rear
More information