Contents. Fans. Page. Make Farnell-Newark InOne your first choice - search over 300,000 products at

Transcription

1 Farnell Page 709 Date: time:16:26 Contents Page Accessories 7 Axial Flow - Low Vltage dc 714 Axial Flow - Mains ac 710 Backward Curved 720 Blowers 721 Fan Speed Controllers 723 Flatpack 720 High Performance ac/dc 713 Mixed Flow 720 Thermal Speed Controlled 714 Make Farnell-Newark InOne your first choice - search over 300,000 products at

2 Farnell Page 710 Date: time:16: , 1mm Slimline 92mm Life expectancy Axial Flow - Mains ac 1mm >30000 hours 92mm 1mm 92mm 1mm 92mm 1mm Height 92 1 Depth Fix Centres 82.5 x x 105 Width 92 1 Cut-out Ø Fix Centres Ø Voltage Power Air Flow Noise Operating Order V ac Watts cu ft/min ltrs/sec dba@1m Temp C List No. Code 92mm, Super Low Noise to L to L mm, Low Noise to M to M mm, Standard to to mm, Super Low Noise to L to L mm, Standard to to mm Connecting Lead LZ Voltage Order Code mm, Super Low Noise 115V V mm, Low Noise 115V V V V mm, Standard 115V V V V mm Connecting Lead , 92mm, 1mm Slimline 92mm 1mm Ì Low cost slimline ac fans Ì Impedance protected Ì Aluminium frame with UL94V-O rated plastic impeller Ì Supplied with a 330mm 24AWG lead wire Ì ULrecognised and CSA approved (except , ) Ì Aerodynamically shaped slimline 25mm deep ac fans Ì Shaded pole motor driven with internal rotor Ì Aluminium alloy frame with glass reinforced polycarbonate impeller Ì Fitted with ball bearings and 2.8 x 0.5mm push-on blade terminals Ì Approved to VDE, CSA and UL recognised Blade connections can be used with connecting lead ( ) or hard wired and soldered. Operating temperature -10 C to +70 C Life expectancy > C Voltage Power Air Flow Noise Bearing Order Vac Watts cu ft/min ltrs/sec 1m Type Code BB BB mm BB BB mm BB BB , 92mm, 1mm Life expectancy 92mm 1mm Height Width Depth Cut-out Ø Fix Centres 71.5 x x x 105 Fix Centres Ø Voltage Order Code V V mm 115V V mm 115V V H=80, W=80, D=38. Cut-out Ø=77, Fix. Centres=71.5 x 71.5 x 4 Ì Powerful high pressure fans with an external rotor shaded pole motor >62500 hours 92mm H=92, W=92, D=38, Cut-Out Ø=98 (88 flats) Fix. Centres 81.5 x mm H=1, W=1, D=38 Cut-out Ø=115, Fix. Centres=105 x 105 x 4 Ì Approved to VDE, CSA and UL recognised Ì Fitted with sleeve (SB) or ball (BB) bearings Voltage Power Air Flow Noise Operating Connec. Bearing Order V ac Watts cu ft/min l/sec dba@1m Temp C Type* Type List No. Code, Ultra Low Noise to +80 Lead SB 8830N to +80 Lead SB 8880N , Super Low Noise to +70 Lead SB 8800N to +70 Lead SB 8850N , Low Noise to +75 Lead SB 8500N to +70 Lead SB 8550N , Standard to +95 Lead BB 8506N to +90 Lead BB 8556N , Dual Voltage 115/ to +80 Lead SB 8560N mm, Standard to +65 Lead SB to +55 Lead SB to +75 Lead BB to +75 Lead BB mm, Super Low Noise to +70 Pin SB 4840N to +60 Pin SB 4890N mm, Low Noise to +55 Pin SB 4800N to +45 Pin SB 4850N mm, Standard to +70 Pin SB 4600N to +45 Pin SB 4650N to +95 Pin SB 4606N to +95 Pin BB 4656N mm Connecting Lead LZ * with pin type connection should be used with a connecting lead ( ) or hard wired and soldered. Voltage Order Code , Ultra Low Noise 115V V , Super Low Noise 115V V , Low Noise 115V V , Standard 115V V , Dual Voltage 115/220V ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

3 Farnell Page 711 Date: time:16: Voltage Order Code mm, Standard 115V V V V mm, Super Low Noise 115V V mm, Low Noise 115V V mm, Standard 115V V V V mm Connecting Lead , 120mm Fan size 60mm 120mm 150mm Cut-out Ø Fix Centres Fix. hole Ø Dimensions Voltage Power Air Flow Noise H W D V ac Watts cu ft/min dba@1m List No. Order Code PS-12W-B30-A PS-23T-B30-A MS-23T-B5A-A PC-23T-B30-A Dimensions Voltage H W D ac Order Code , 1mm 120mm Ì UL94V-0 plastic impeller and diecast aluminium casing Ì Shielded ball bearings Ì Impedance protected Ì Connection via two 0.11" terminals Ì UL recognised, CSA approved Order Code Voltage , Standard 115V V mm, Low Noise 115V V mm, Standard 115V V mm Life expectancy >50000 hours Dia=150, D=55 Cut-out Ø=147 Fix. Centres=162 x 4.5 Voltage Power Air Flow Noise Operating Lead Order V ac Watts cu ft/min ltrs/sec dba@1m Temp C Length List No. Code to W2S130-AA to W2S130-AA / to W2S130-AA Voltage Order Code V V / mm Major XT Ì Efficient, low noise fans Ì Thermally protected shaded pole motor. Ì VDE approved, UL recognised, CSA certified Ì Fitted with ball bearings. Ì Aluminium motor base and polycarbonate impeller Ì Terminal connection Ì Stainless steel ball bearings Voltage Power Airflow Noise Speed Dimensions (V ac) (Watts) (CFM) (dba) (RPM) (WxHxD) List No. Order Code / / x172x38 ME2B /230 35/ / x172x38 ME77B Order Code Ì Low cost, low noise, high pressure fans Ì Impedance protected Ì Sleeve bearings 1mm Ì Diecast aluminium zinc housings Ì UL94V-O rated plastic impellers Ì Supplied with 300mm, 22 AWG lead wire Ì Approved to TUV, UL recognised and CSA Operating temperature -10 C to +70 C Life expectancy > C Voltage Power Air Flow Noise Bearing Order V ac Watts cu ft/min ltrs/sec dba@1m Type Code, Standard SB Ball mm, Low Noise SB SB mm, Standard SB SB mm Height 80 1 Width 80 1 Depth Cut-out Ø Fix Centres 71.5 x x 105 Fix Centres Ø mm Maltese AC Ì Die-cast venturi, with UL94-V0 flame retardant polypropylene impeller Ì Air intake over the fan struts Ì Stainless steel ball bearings Ì Termination via two pin terminal Ì 53,000 hours fan life at 40 C, L 10 Ì UL recognised, CSA and VDE approved Voltage Frequency Current Power Noise Speed Air Flow Order V ac Hz A Watts dba@1m RPM cu ft/min List No. Code /60 0.2/ / / /300 MA77B / / / / /300 MA2B Dimensions Voltage H W D V Order Code Voltage Frequency Current Power Noise Speed Air Flow Order V ac Hz A Watts dba@1m RPM cu ft/min List No. Code /60 0.2/ / / /300 MA77B / / / / /300 MA2B Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 711

4 Farnell Page 712 Date: time:16: Dimensions Voltage H W D V Order Code Voltage Power Air Flow Noise Operating Order V ac Watts cu ft/min ltrs/sec dba@1m Temp C List No. Code C to +70 C MR2B C to +70 C MR77B C to +70 C PT2B C to +70 C PT77B mm Falcon Ì Feathered edge impeller for low noise Ì Stainless steel ball bearings Ì Die-cast aluminium alloy venturi with flame retardant polycarbonate propeller Ì CSA and VDE approved, UL recognised Dimensions H W D Voltage Order Code Major V V Patriot Dia V Dia V Finger Guards Dia Voltage Power Air Flow Noise Order V ac Watts cu ft/min ltrs/sec dba@1m List No. Code FA2B FA77B Dimensions Dia D Voltage Order Code V V Finger Guards Dia Voltage Power Air Flow Noise Order V ac Watts cu ft/min ltrs/sec dba@1m List No. Code FA2B FA77B Dimensions Dia D Voltage Order Code V V Finger Guards Dia mm 171mm Major and Patriot H=150, W=172, D=38 Dia=172, D=51 Ì Metal fan housing and impeller Ì Thermally protected external rotor capacitor motor Ì Fitted with ball bearings Ì VDE, and CSA approved, UL recognised Voltage Power Air Flow Noise Operating Order V ac Watts cu ft/min ltrs/sec dba@1m Temp C List No. Code C to +80 C 7006ES C to +65 C 7056ES C to +75 C 6028ES C to +75 C 6078ES Dimensions H W D Voltage Order Code V V Dia V Dia V Finger Guards 150mm mm mm Tarzan Ì Sealed Ball Bearing Ì Earthed through fan mounting hole Voltage Power Air Flow Noise Operating Order V ac Watts cu ft/min ltrs/sec dba@1m Temp C List No. Code / C to +66 C Voltage Connector Type Order Code V Lead Finger Guards mm Caravel H= W= D= Ì CSA and TUV approved, UL recognised Ì Supplied with 304mm lead Ì Sealed ball bearings Ì Earthed through tapped hole on fan case Ì Available with 304mm lead or 3.05mm solder terminals Ì CSA approved, UL recognised D=88.90, Dia= Voltage Power Air Flow Noise Operating Order V ac Watts cu ft/min ltrs/sec dba@1m Temp C List No. Code C to +60 C CLE2L C to +60 C CLE3L C to +60 C CLE2T C to +60 C CLE3T Connection Voltage Type Order Code V Lead V Lead V Solder Terminal V Solder Terminal Finger Guards Worried about the part number lottery? Count on us for traceability -visit Major Patriot H=171.50, W=150.40, D=50.80, Dia=171.50, D=50.80 Ì Feathered edge impeller for low noise Ì Stainless steel ball bearing Ì CSA and VDE approved, UL recognised Ì 3.05mm solder terminals 712 1,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

5 Farnell Page 713 Date: time:16: mm Caravel XL AC & DC Axial Flow Voltage Power Airflow Noise Speed Dimensions (V ac) (Watts) (CFM) (dba) (RPM) (WxHxD) List No. Order Code x255x107 CLE2L x255x107 CLE3L Order Code AC Axial Fan Power Air Noise Dimensions Order Voltage Input Flow (dba) (WxHxD) Weight List No. Code 230V ac, 50/60Hz 47W 945m³/h x 370 x 49mm 3.4kg W4S250-DI02-06* V ac, 50/60Hz 120W 2441m³/h x 430 x 62mm 6.8kg W4E315-DP V ac, 50/60Hz 180W 3110m³/h x 485 x 68mm 6.8kg W4E350-DP V ac, 50/60Hz 300W 5000m³/h x 540 x 86mm 7.3kg W4E400-DS V ac, 50/60Hz 470W 6732m³/h x 576 x 86mm 9.6kg W4E450-DV Note: * Denotes Class B Motor List No. Order Code W4S250-DI W4E315-DP W4E350-DP W4E400-DS W4E450-DV mm, 225mm Ì Aluminium motor base and polycarbonate impeller Ì Termination via 24" lead wires Ì Stainless steel ball bearings High Performance ac/dc AC Compact Supply - 230V - Single Phase - 50Hz Air Flow Dimensions Impeller Ø Noise Level (I/s) H W D dba@1m List No. Order Code ES W2E200-HH Type List No. Order Code AC Compact 6058ES AC Compact W2E200-HH AC Compact AC Compact Ì Reliable and rugged plate fans suitable for industrial application Ì External rotor motor gives good speed control and energy efficiency Ì Sickle blades provide lower sound levels, higher pressure development and improved air flow Ì Insulation class F (unless otherwise stated) motor with maintenance free sealed for life bearings Ì Terminal box protected by IP 54 Ì Galvanised painted wall plate with full bell-mouth and inlet guard Ì Robust all-metal construction Ì Ball bearings Ì Reverse mounting for sucking or blowing Ì Locked rotor protection by built-in thermal cut-out Ì Mounting in any position Ì CSA, VDE approved, UL recognised Voltage Power Air Flow Noise V dc Watts cu. ft./min. ltrs./sec. dba@1m List No. Order Code AC - Slimline 220/240 14/ SF23080AT/2082HBL.GN /240 14/ SF23092A/2092HBL.GN /240 / DP201AT/2122HBL.GN AC - Low Cost 220/240 14/ SF23080A/2083HSL.GN / SP101A/1123HSL.GN /240 20/ DP201A/2123HSL.GN DC - Slimline GM0503PEV1-8.N.GN GM0504PEV2-8.GN DC - Ultra Slimline GM1203PFV2-8.GN GM1235PFV2-8.GN KDE1204PFV2.11.MS.A.GN DC - Standard KDE1204PKV2.MS.GN KDE2404PKV2.MS.A.GN KDE1206PTV2.13.MS.A.GN KDE2406PTV2.13.MS.A.GN KDE1208PTV2.13.MS.A.GN KDE2408PTV2.13.MS.A.GN KDE1209PTV2.13.MS.A.GN KDE2409PTV2.13.MS.A.GN KD1212PTB2-6A.GN KD2412PTB2-6A.GN KD1212PMB1-6A.GN KD2412PMB2-6A.GN DC - Green GM1204PFVX-AF.GN KDE1204PKVX.MS.AF.GN GM1205PHVX-AF.GN GM1206PHV1-AF.GN KDE1206PHV1.MS.AF.GN KDE1206PTVX.MS.AF.GN Dimensions Order (mm) List No. Code AC - Slimline 80 x 80 x 25 SF23080AT/2082HBL.GN x 92 x 25 SF23092A/2092HBL.GN x 120 x 25 DP201AT/2122HBL.GN AC - Low Cost 80 x 80 x 38 SF23080A/2083HSL.GN x 120 x 38 SP101A/1123HSL.GN x 120 x 38 DP201A/2123HSL.GN DC - Slimline 30 x 30 x 6 GM0503PEV1-8.N.GN x 40 x 6 GM0504PEV2-8.GN DC - Ultra Slimline 30 x 30 x 10 GM1203PFV2-8.GN x 35 x 10 GM1235PFV2-8.GN x 40 x 10 KDE1204PFV2.11.MS.A.GN DC - Standard 40 x 40 x 20 KDE1204PKV2.MS.GN x 40 x 20 KDE2404PKV2.MS.A.GN x 60 x 25 KDE1206PTV2.13.MS.A.GN x 60 x 25 KDE2406PTV2.13.MS.A.GN x 80 x 25 KDE1208PTV2.13.MS.A.GN x 80 x 25 KDE2408PTV2.13.MS.A.GN x 92 x 25 KDE1209PTV2.13.MS.A.GN x 92 x 25 KDE2409PTV2.13.MS.A.GN x 120 x 25 KD1212PTB2-6A.GN x 120 x 25 KD2412PTB2-6A.GN x 120 x 38 KD1212PMB1-6A.GN x 120 x 38 KD2412PMB2-6A.GN DC - Green 40 x 40 x 10 GM1204PFVX-AF.GN x 40 x 20 KDE1204PKVX.MS.AF.GN x 60 x 15 GM1206PHV1-AF.GN x 60 x 20 KDE1206PHV1.MS.AF.GN x 60 x 25 KDE1206PTVX.MS.AF.GN DC Axial (Panaflo) Hydro Wave Bearing Ì CE, CUR, TUV approved, UL recognised Ì Supplied with 300mm lead Ì Full range of fans, ac, dc, slimline and green Ì Long life Ì Stable operation Ì Operating temperature range -10 C to +90 C Ì Green range supplied with 3 wires / Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 713

6 Farnell Page 714 Date: time:16: Panaflo axial fans suit a wide range of applications. They force air out in a "funnel" type pattern, and are ideal when cooling a specific area such as a power supply that is surrounded by numerous components with minimum ventilation available. Panaflo s unique Hydro Wave Bearing (HWB) addresses the traditional weakness of sleeve bearings, axial friction. The HWB system utilizes a thrust plate that "floats" on a circulating film of oil greatly reducing axial friction and bearing deterioration. The HWB pattern on the bearing virtually eliminates thrust plate contact. Ì Locked rotor protection Ì Auto-start function Ì Lower circuit noise Ì Easy access to lead wires (2) via plug-in connector on housing Ì CSA Approved and UL Recognised Dimensions (mm) & & & & Dimensions (H x W x D) 60 x 60 x x 80 x x 92 x x 120 x 38 Fixing hole Ø Fixing centres 50 x x x x 105 Voltage Power Air Flow Noise Current Speed V dc W cu.ft/min m³/min db ma rpm List No FBA06A12H1A FBA06A24H1A FBA08A12H1A FBA08A24H1A FBA09A12H1A FBA09A24H1A FBA12G12L1A FBA12G24L1A List No. Order Code FBA06A12H1A FBA06A24H1A FBA08A12H1A FBA08A24H1A FBA09A12H1A FBA09A24H1A FBA12G12L1A FBA12G24L1A VARIOFAN Thermal Speed Controlled 4664 H=80, W=80, D=25 Cut-out Ø=77, Lead length=310 Fix. centres=71.5 x 71.5 x 4 Axial Flow - Low Voltage dc Micro Slim - 6mm Deep 5 V dc Ì 25, 30 and 40mm micro slim fans Ì Ideal for precision cooling or compact equipment Operating Voltage 5V dc Operating Life hrs Operating temperature -10 C to +70 C Dimensions Power Air Flow Noise H W D Type Watts cu ft/min ltrs/sec 1m List No. Order Code Low Noise, 25mm GM0502PEV2-8.N.GN Standard,25mm GM0502PEV1-8.N.GN Low Noise,30mm GM0503PEV2-8.N.GN Standard,30mm GM0503PEV1-8.N.GN Low Noise,40mm GM0504PEV2-8.GN Standard,40mm GM0504PEV1-8.GN Voltage V dc Order Code mm Low Noise Standard mm Low Noise Standard mm Low Noise Standard Miniature, Ultraslim Ì Patented single coil brushless 8 pole motor Ì Locked rotor protection Ì Precision ball bearings 92mm H=92, W=92, D=25 Cut-out Ø=89, Lead length=310 Fix. centres=82.5 x 82.5 x 4.3 1mm H=1, W=1, D=32 Cut-out Ø=115, Lead length=310 Fix. centres=105 x 105 x 4 Ì Variable speed Ì External NTC thermistor controls speed/airflow relative to temperature Ì Thermistor supplied but not fitted, for user flexibility Ì Fan speed automatically reduces by upto 50% as thermistor temperature decreases Ì Overload and reverse polarity protected Ì Glass reinforced plastic (POCAN) housing Ì version VDE approved Life expectancy >27500 hours (sleeve bearing (SB) -20 C to +65 C >37500 hours (ball bearing (BB) Temp. Voltage Range of of Power Air Flow Noise Bearing Order V dc V dc NTC C NTC kω Watts cu ft/min ltrs/sec dba@1m type. List No. Code, Slim 12 8 to SB 8412NGMLV mm, Slim 12 8 to SB 3412NGV mm, Standard 12 8 to BB 4312MV-R Order Code , Slim mm, Slim mm, Standard mm 30mm Ì 25, 30, 35 and 40mm ultra slim fans Ì Ideally suited for precision cooling Ì Patented Single - coil brushless 8 pole motor design Voltage Power Air Flow Noise Order V dc Watts cu ft/min ltrs/sec dba@1m List No. Code 12 ± 15% GM1202PFV2-8.GN ± 15% GM1203PFV2-8.GN ± 15% GM1235PFV2-8.GN ± 15% KDE1204PFV2.11.MS.A.GN Dimension Voltage Order H W D V dc Code Miniature, Tube 35mm 40mm Ì Locked rotor protection Ì Low power consumption Ì Fitted with precision ball bearings Ì TUV approved, UL recognised 24mm 36mm 48mm 60mm Ì Brushless, low noise Ì Black reinforced plastic housing and impeller Ì Supplied with 200mm flying leads Ì Sleeved bearings Voltage Power Air Flow Noise V dc Watts cu ft/min ltrs/sec dba@1m List No. Order Code 24mm Dia D241L-006GK D241L-012GK ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

7 Farnell Page 715 Date: time:16: mm Dia D341T-012GK D341T-024GK mm Dia D481T-012KA D481T-024KA mm Dia D601T-012KA D601T-024KA Dimensions Voltage Order Dia x D VDC Code x x x x x x x x Ultra Slim 40mm Miniature, 40mm 62mm Ì Brushless, low noise ultra slim fans Ì Glass-fibre reinforced plastic housing Ì Reverse polarity protected Ì 12 and 24V fans are suitable for both AC and DC operators Life expectancy >30000 hours (sleeved bearings (SB)) >30,000 hours (ball bearings (BB)) Power Air Flow Noise Operating Lead Bearing Order Voltage Watts cu ft/min ltrs/sec dba@1m Temp C Length Type List No. Code 40mm 5V dc to BB F41MM-005XK V dc to BB F41MM-012XK V dc to BB F41MM-024XK mm 5V dc to SB F62MM-005GK V dc to SB F62MM-012GK V dc to SB F62MM-024GK V dc to SB F75EM05VDCP V ac/dc to SB F75EM12VDAP V ac/dc to SB F75EM24VDAP mm 62mm Height Width Depth Cut-out Ø Fixing Centres 32 x x x 71.5 Fixing Centres Ø Voltage Order Code mm 5V V V mm 5V V V V Vac/dc Vac/dc Ì High cooling performance, ideal for CPU s, small devices or heat-intensive areas on printed circuit boards Ì Overload and electronic reverse polarity protected Ì Fitted with sleeve bearings Voltage Power Air Flow Noise Order V dc Watts Cu. ft./min. ltrs/sec db(a)c/m List No. Code F F FH F Size Voltage H W D V dc Order Code Compact, 40mm Voltage Power Air Flow Current Signal Sensor Speed Order V dc Watts Cu. ft./min. Consumption (ma) Wire RPM List No. Code JH JHH J/2HH J JH J/2H JHH J/2HH Dimensions (HxWxD) 40 x 40 x 25 Fixing hole Ø 3.5 Fixing centres 32 x 32 List No. Order Code JH JHH J/2HH J JH J/2H JHH J/2HH List No. Order Code JH JHH J/2HH J JH J/2H JHH J/2HH Slimline 2043 Ì Compact 40x25mm mini fan for DC operation Ì Available with or without sensor signal to monitor fans performance Ì Manufactured from PBT/PA 6.6 Ì Excellent air flow values and minimum noise level Ì DC drive employs an electronically commutated external rotor motor with low power consumption Ì Fully integrated commutation electronics Ì Fitted with ball bearings Ì Life expectancy of over 55, C Ì Weight: 50g Voltage Power Air Flow Current Signal Sensor Speed Order V dc Watts Cu. ft./min. Consumption (ma) Wire RPM List No. Code JH JHH J/2HH J JH J/2H JHH J/2HH mm 92mm 1mm Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 715

8 Farnell Page 716 Date: time:16: Ì Brushless, high airflow, low power fans Ì Stall and reverse polarity protected Ì Glass reinforced pocan (PTB) housings Ì Slimline design only 25mm (1") deep, 60mm 15mm (0.59") deep Ì Speed sensor options offer integrated speed monitoring using a square wave output which can be used for protection against overheating, component damage or intelligent cooling Ì VDE and CSA approved, UL recognised Ì 92mm versions UL recognised only 50mm 60mm 92mm 1mm Height Width Depth Cut-out Ø Fix Centres 42 x x x x x Fix Centres Ø *Speed sensor option: Square wave signal amplitude depends on pull up resistor used. 2 pulses per revolution, open collector without internal pull up resistor Voltage Range Power Air Flow Noise Bearing V dc V dc Watts cu ft/min ltrs/sec dba@1m type. List No. Order Code 50mm, Standard to SB 512F to SB 514F mm, Low Noise to SB 612F to SB 614F , Super Low Noise 12 8 to SB 8412NGL * 8 to SB 8412N/2GL to SB 8414NGL * 18 to SB 8414N/2GL , Low Noise 12 8 to SB 8412NGM * 8 to SB 8412N/2GM to SB 8414NGM * 18 to SB 8414/2GM , Standard 12 8 to SB 8412NG * 8 to SB 8412NG/ to SB 8414NG * 18 to SB 8414N/2G to SB 8412NGH * 7 to SB 8412N/2GH to SB 8414NGH * 18 to SB 8414N/2GH mm, Super Low Noise 12 8 to SB 3412NGL to SB 3414NGL mm, Low Noise 12 8 to SB 3412NGM to SB 3414NGM mm, Standard 12 8 to SB 3412NG to BB 3412N to SB 3414NG to BB 3414N to SB 3412NGH to SB 3414NGH mm, Low Noise 12 7 to SB 4412FGM * 7 to BB 4412F/ to BB 4414FM mm, Standard to BB 4414F * 12 to BB 4414F/ Voltage Order Code mm, Standard 12V V mm, Low Noise 12V V , Super Low Noise 12V V V/Speed Sensor , Low Noise 12V V/Speed Sensor V V/Speed Sensor , Standard 12V V/Speed Sensor V V/Speed Sensor V V/Speed Sensor V V/Speed Sensor mm, Super Low Noise 12V V Voltage Order Code mm, Low Noise 12V V mm, Standard 12V V V V V V mm, Low Noise 12V V/Speed Sensor V mm, Standard 24V V/Speed Sensor Standard Ì Brushless, high air flow, low power fans Ì Constructed to VDE0730 Ì Stall and reverse polarity protected Ì Fitted with sleeved (SB) or ball (BB) bearings Ì CSA approved, UL recognised Ì Glass reinforced plastic housings (127 and 135mm, metal) 60mm 92mm 1mm 127mm 135mm Height Width Depth Cut-out Ø Fix Centres 50 x x x x x x 113 Fix Centres Ø Voltage Range Power Air Flow Noise Operating Bearing V dc V dc Watts cu ft/min ltrs/sec dba@1m Temp C Type List No. Order Code 60mm, Super Low Noise 12 6 to to +65 BB 612L to to +65 SB 612NGL to to +65 SB 614NGL mm, Standard to to +65 SB 614NGN to to +65 SB 612NGH to to +65 SB 612NGHH to to +65 SB 614NGHH , Super Low Noise 12 6 to to +75 BB 8312L to to +75 BB 8314L , Standard 12 6 to to +75 BB to to +75 BB mm, Super Low Noise 12 6 to to +75 BB 3312L mm, Standard 12 6 to to +75 BB to to +75 BB mm, Super Low Noise 12 6 to to +75 BB 4312L to to +75 BB 4314L mm, Super Low Noise, 38mm Depth 12 7 to to +80 SB 4212NGL to to +80 SB 4214NGL mm, Low Noise 12 6 to to +75 BB 4312M to to +75 BB 4314M mm, Low Noise, 38mm Depth 12 7 to to +70 SB 4212NGM to to +70 SB 4214NGM mm, Standard 12 6 to to +75 BB to to +75 BB to to +75 BB mm, Standard, 38mm Depth 12 7 to to +70 BB 4212NH to to +70 BB 4214NH mm, Standard to to +72 BB mm, Standard 12 6 to to +72 BB 5112N to to +72 BB 5114N ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

9 Farnell Page 717 Date: time:16: Voltage Order Code mm, Super Low Noise 12V V mm, Standard 24V V V V , Super Low Noise 12V V , Standard 12V V mm, Super Low Noise 12V mm, Standard 12V V mm, Super Low Noise 12V V mm, Super Low Noise, 38mm Depth 12V V mm, Low Noise 12V V mm, Low Noise, 38mm Depth 12V V mm, Standard 12V V V mm, Standard, 38mm Depth 12V V mm, Standard 24V mm, Standard 12V V Standard 40mm 60mm 120mm Ì UL94V-0 plastic casing and impeller Ì Shielded ball bearings Ì Reverse polarity protected Fan size 40mm 60mm 120mm Cut-out Ø Fix Centres Fix. hole Ø Ì Auto-restart facility will shut-down the current if a blockage occurs Ì Connection by two 300mm lead wires + Red, - Black Ì CSA approved, UL recognised Dimensions Voltage Power Air Flow Noise H W D V dc Watts cu ft/min dba@1m List No. Order Code KL-01W-B30-L KL-01W-B50-L KL-04W-B30-L KL-04W-B50-L KL-05W-B30-L KL-05W-B50-L KL-01W-B30-M KL-01W-B50-M KL-04W-B30-M KL-04W-B50-M KL-04W-B40-L NL-04W-B10-P NL-04W-B50-P NL-05W-B10-P NL-05W-B50-P ML-04W-B30-E ML-04W-B80-E ML-05W-B30-E ML-05W-B80-E RL-04W-B10-C Dimensions Voltage Power Air Flow Noise RL-04W-B50-C RL-04W-B70-C RL-05W-B10-C RL-05W-B50-C RL-05W-B70-C KL-04W-B40-C KL-04W-B50-C KL-04W-B50-P KL-05W-B50-P RL-04W-B10-C RL-04W-B50-C RL-04W-B70-C RL-05W-B10-C RL-05W-B50-C RL-05W-B70-C KL-04W-B30-B KL-04W-B50-B KL-05W-B30-B KL-05W-B50-B KL-04W-B70-E KL-05W-B70-E KL-04W-B30-E KL-04W-B50-E KL-05W-B30-E KL-05W-B50-E KL-04W-B30-P KL-05W-B30-P KL-04W-B30-P KL-05W-B30-P PL-04W-B50-L PL-05W-B70-L Dimensions Voltage H W D Vdc Order Code Standard 40mm 60mm 92mm Ì Low cost, low noise, brushless dc fans Ì Housing and impeller made from UL94V-0 thermoplastic Ì Fitted with ball bearings and 300mm, 22 AWG lead wire Ì UL Recognised 1mm Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 717

10 Farnell Page 718 Date: time:16: Operating temperature -10 C to +70 C Life expectancy > C Air Flow Noise dba Dimensions Voltage Vdc Power Watts cu ft/min 1m Order Code 40mm 40 x 40 x 20 12V x 40 x 20 24V mm 60 x 60 x 25 12V x 60 x 25 24V x 80 x 25 12V x 80 x 25 24V mm 92 x 92 x 25 12V x 92 x 25 24V mm 1 x 1 x 25 12V x 1 x 25 24V x 1 x 38 12V x 1 x 38 24V mm 60mm 92mm 1mm Height Width Depth Cut-out Ø Fix Centres 32 x x x x x Fix Centres Ø Size Voltage H W D V dc Order Code Humidity Protected Ì Improved humidity protection 95% Ì Designed to meet humidity range according to group C of DIN40040 item 3.3 Limits of relative humidity are: Annual Mean Value 95% Maximum value a) On 30 days of the year (naturally distributed) 100 % b) On all other days ocassionally (under observance of the annual mean value 100%, dewing is allowed) Voltage Range Power Air Flow Noise Bearing Order V dc V dc Watts cu ft/min ltrs/sec dba@1m Type List No. Code 12 8 to SB 8412NGR to SB 8414NGR to BB 4312R to BB 4314R Dimensions Voltage H W D V dc Order Code IP54 Rated Long Life Ì Up to 20 years (200,000 hours) continuous operation, 5 times longer life than conventional fans Ì Diecast aluminium housing with UL94V-1 plastic impeller Ì Oversize ball bearings Ì Reverse polarity and locked rotor protection Ì Connection by two 300mm, 24Awg leads Ì Conforms to EN Life expectancy >200,000 hrs (120mm), >100,000 hrs (, 92mm and 140mm) Dimensions Voltage Power Air Flow Noise Order H W D V dc Watts cu ft/min ltrs/sec 1m List No. Code L0812H L0824H L0912H L0924H L1212H L1224H L1248H L1412H L1424H Fan size 92mm 120mm 140mm Cut-out Ø Fixing centres Fixing hole Ø Size Voltage Order H W D V dc Code Ì IP54 rating gives protection in extreme environmental conditions Ì Complete stator and PCB are totally encapsulated in polyurathane which is applied under high vacuum pressure forming a one piece moulding Ì High quality stainless steel bearing system Dimensions Voltage Power Air Flow Noise Order H W D V dc Watts cu ft/min ltrs/sec 1m List No. Code U U U U Dimensions Voltage H W D V dc Order Code In stock and ready to despatch, 300,000 products in our Asia, US and Europe warehouses ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

11 Farnell Page 7 Date: time:16:35 7 IP54 Rated Sprite DC and Muffin XL DC Ì Internal fan encapsulation to prevent damage from dust & water Ì Die-cast venturi, with UL94-V0 flame retardant polypropylene impeller Ì Stainless steel ball bearings Ì Two lead wires AWG22, UL 1061 Ì UL recognised, CSA and TUV approved Ì Order code supplied with tacometer Finger Guards and Filters Accessories Voltage Current Power Noise Speed Air Flow Order V dc A Watts dba@1m RPM cu ft/min List No. Code SD24B5-E MD24B5-E GL24B7E Dimensions Voltage Order H D V Code mm Galaxy Ì Feathered edge impeller for low noise Ì Stainless steel ball bearings Ì CSA and VDE approved, UL recognised Ì 3.05mm solder terminals Voltage Power Air Flow Noise V dc Watts cu ft/min ltrs/sec dba@1m List No. Order Code GL12B GL24B Dimensions Voltage H W D V dc Order Code Order Finger Guards Code mm, Metal /62mm, Metal , Metal , Plastic mm, Metal mm, Plastic mm, Metal mm, Plastic mm, Metal mm, Metal mm, Metal Filters 60/62mm mm mm Price Per Pack Replacement Filters (5 Per Pack) 60/62mm mm mm mm Ì Metal fan housing and impeller Ì Fitted with ball bearings Ì Electronic protection against reverse polarity and blocking Ì Electronic motor current limitation on start up and when rotor is blocked Ì VDE and CSA approved, UL recognised Metal Mesh Filter Voltage Power Air Flow Noise V dc Watts cu ft/min ltrs/sec dba@1m List No. Order Code NM N Dimensions Voltage Dia. Depth V dc Order Code Fan Mount Ì Designed for 120mm fans Ì Black fibre glass reinforced plastic bezel with inserted stainless steel wire mesh Order List No. Code LZ40N Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 7

12 Farnell Page 720 Date: time:16: Filter Assemblies Filter Assemblies Ì Mount directly onto existing fixing locations Ì Assemblies consist of 3 elements, outer grill cover, inner fixing plate and filter pad Ì The grill cover is moulded in polycarbonate with a matt finish, it incorporates quick release fasteners to assist filter changes Ì The inner fixing plate is constructed of steel sheet with a black epoxy powder finish. A plastic screen provides protection when the filter is changed and the fan is running Ì The filter pad is made of white synthetic bonded fibre to P15/150R Ì The filter will achieve 75% dust particle retention sown to 5-10 microns in size, can withstand temperatures up to 100 C and is flame resistant to BS2963 Ì Reduction in airflow of 20-30% /Per Pack Filter Assemblies List No. Order Code 1+ PMFA80T mm PMFA120T Replacement Filters x 5 filters FP80T x 5 filters FP120T Low Voltage DC, 172mm High Airflow Pressure Backward Curved Centrifugal Fan 230V ac Mixed Flow Ì Combines the structural features of axial and radial fans Ì Generates greater static pressure than a standard axial fan Ì Metal housing with glass reinforced plastic impeller Ì Fully integrated commutation electronics, electronic protection against reverse polarity and blocking Dimensions Power Air Flow Noise Voltage Dia D Watts cu ft/min ltrs/sec dba List No. Order Code 24V dc DV Dimensions Order Dia D Voltage Code V dc Backward Curved Ì Ideal for sucking applications against pressure systems, example: extraction from hoods and cabinets Ì Non-overloading characteristics Ì Utilises external rotor motors Ì Built-in thermal protection Ì Maintenance-free ball bearings Ì Operation possible without scroll Ì Assemblies consist of guard, polyurethane foam filter, and media retainer Ì Manufactured from UL94-V0 high impact plastic Impeller Ø Air Flow Noise level (mm) (l/s) (db) List No. Order Code Order Code /Per Pack Filter Assemblies mm mm Replacement Filters (5 Per Pack) mm mm EMC Screened Filters R2S133-AE R2S175-AB R2E0-A R2E220-AA R2E225-AT51-05+CAP Air Flow (ls) List No. Order Code R2S133-AE R2S175-AB R2E0-A R2E220-AA R2E225-AT51-05+CAP Ì High efficiency EMC screened axial fan filters/finger guards Ì One piece welded mesh construction Ì Excellent overall screening effectiveness over fan aperture Ì Only 1% airflow reduction, compared with 20% from a conventional woven mesh filter Average screening efectiveness (db) Size 40MHz 1GHz/1.1 GHz - 4GHz List No. Order Code 40mm PRF /62mm 14.05/15.40 PRF /25.80 PRF mm 24.74/25.14 PRF mm 31.79/22.95 PRF Size Order Code mm /62mm mm mm Flatpack High Static Pressure for Crowded Enclosures Operating temperature -20 C to +60 C Ì Durable construction - fibreglass blower wheel and housing mounted on galvanised steel plate Ì Electronic protection against reverse polarity and thermal overload Ì Air flows into axis of rotation and exhausts through port on one edge Ì Supplied with two connecting leads approx 300mm long with stripped and tinned ends Ì Advanced ball bearing design for very long operational life, 121mm ac fans have sleeved bearings Dimensions Power Air Flow Noise H W D Voltage Watts cu ft/min ltrs/sec dba List No. Order Code V ac RL90-18/ V ac RL90-18/ Dimensions Order H W D Voltage Code V ac V ac Dimensions Power Air Flow Noise H W D Voltage Watts cu ft/min ltrs/sec dba List No. Order Code V dc RL90-18/12N V dc RL90-18/14N V ac RL90-18/ V ac RL90-18/ V dc RG90-18/14N ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

13 Farnell Page 721 Date: time:16:37 Dimensions Power Air Flow Noise dc RG90-18/ ac RG125-/14N V dc RG160-28/ V dc RG160-28/14N dc RG S Dimensions Order H W D Voltage Code V dc V dc V ac V ac V dc V ac V dc V dc V dc V ac Low Voltage DC, 120mm, 162mm Biscuit and Spinnaker Ì Air flows into axis of rotation and exhausts through port on one edge Ì Ideal for crowded enclosures or where space is a premium Ì Stainless steel ball bearings Ì Electronic locked rotor protection Ì CSA and VDE approved, UL recognised Voltage Power Air Flow Noise V dc Watts cu ft/min ltrs/sec dba@1m List No. Order Code BD12A BD24A SPD24B Dimensions Voltage H W D V dc Order Code Low Voltage DC Low Voltage Blowers Blowers Ì 12, 24VDC input electronically commutated blowers Ì Operating temperature 0-50 C Ì Choice of 76 and 145mm housings Ì Maximum pressure to 64 mbar Ì Maximum air flows to 18L/sec Ì Adjustable air performance Ì Compact size Ì Long life Ì ISO 9002 Outlet Max. Case Overall Tube Dia. Pressure Dia. Height (O.D. in (mbar Max Flow Order List No. (mm) (mm) mm) VDC Sealed) (L/sec) Code Order List No. Code , Low Voltage Blowers Ì 12, 24VDC input electronically commutated blowers Ì Operating temperature 0-50 C Ì 127mm housing Ì Maximum pressure to 60 mbar Ì Maximum air flows to 21L/sec Ì Electrical and mechanical control versions Ì Internal and external drive versions Ì Adjustable air performance Ì Thermal protection/locked rotor protection Ì Compact size & long life Outlet Max. Overall Tube Dia. Pressure Height (O.D. in (mbar Max. Flow Control Order List No. (mm) mm) VDC Sealed) L/Sec Type Code External External Mechanical External H =47, W =50 L =(203 = , 260 = , 365 = ) Ì Crossflow fans provide a long but narrow air discharge pattern Ì Ideal for cooling electronics in assembly carriers Ì Locked rotor and polarity protected Ì Very low noise level Voltage Power Air Flow Noise V dc Watts cu ft/min ltrs/sec dba@1m List No. Order Code Q2G030-EA Q2G030-GC Q2G030-FB Length Voltage V dc Order Code mm mm mm FREE to all account holders Notification of obsolete, end of line and end of stock items Replacement or upgrade recommendations List No. Order Code Centrifugal Power Air Dimensions Voltage Input Flow Noise (WxHxD) Weight List No. Order Code 230V ac, 50/60Hz 58/75W 570/620 52/64 0Ø x 62.8mm 1.2kg R2E0-AO V ac, 50/60Hz 85/90W 860/900 73/74 220Ø x 71mm 1.5kg R2E220-AA List No. Order Code Ì Backward curve centrifugal fan, which can be operated with or without a scroll Ì Impellor is completely made of plastic PA6.6, injection moulded round a sheet metal plate Ì Supplied with inlet ring and capacitor Ì Ideal for systems requiring high pressure development R2E0-AO R2E220-AA Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 721

14 Farnell Page 722 Date: time:16: DC Centrifugal Blowers Ì Brushless DC motor with plastic fan housing and impeller Ì High static pressure performance Ì Permanently lubricated dual ball bearing system Ì Long life and high reliability (L10 40,000 hours continuous operation at 60 C ambient) Ì Current limited system with reverse polarity protection Ì UL, CSA and TUV approved Voltage Power Air Flow Noise Operating V dc Watts cu. ft./min. dba@1m Temp C List No. Order Code to BD12HA to BD24HA to BF12HA to BF24HA to BJ12HA Dimensions (mm) List No. Order Code x 76 x BD12HA x 76 x BD24HA x 120 x BF12HA x 32 x BF24HA x 127 x BJ12HA Single Inlet Blowers - AC Ì High performance single inlet fans with an external rotor motor offering the advantage of matched motor and impeller in a compact space saving design Ì Motors are IP 44 rated, sealed for life, maintenance free, class B insulation and precision ball bearings Ì Impeller is forward curved multi-vane type force fitted for vibration free operation and efficient cooling Ì Scroll is made from die-cast aluminium with motor capacitor and terminal block Ì May be mounted in any position Power Air Dimensions Order Voltage Input Flow Noise (WxHxD) Weight List No. Code 230V ac, 50/60Hz 41/44W 155/155 54/ x 168 x 82mm 1.3kg G2E108-AA V ac, 50/60Hz 80/100W 255/265 61/ x 184 x 98mm 1.8kg G2E120-AR77-A V ac, 50/60Hz 240/280W 600/570 72/ x x 100mm 2.9kg G2E160-AD List No. Order Code G2E108-AA G2E120-AR77-A G2E160-AD Double Inlet Blowers - AC Power Air Dimensions Order Voltage Input Flow Noise (WxHxD) Weight List No. Code 230V ac, 50/60Hz 87/100W 435/410 58/57 162x165x146mm 1.5kg D2E097-BI V ac, 50/60Hz 87/0W 700/500 58/57 204x213x168mm 3.3kg D2E133-CI V ac, 50/60Hz 87/5W 810/600 56/57 204x213x232mm 4.4kg D2E133-DM27-D V ac, 50/60Hz 87/80W 540/510 54/ x180x215mm 2.6kg D4E133-AA V ac, 50/60Hz 87/270W 935/690 62/57 206x2x232mm 4.2kg D2E146-AP V ac, 50/60Hz 87/330W 970/690 68/57 206x2x232mm 4.2kg D2E146-AP V ac, 50/60Hz 87/245W 1250/ /57 225x241x232mm 4.5kg D4E160-EG V ac, 50/60Hz 87/460W 2400/00 66/57 295x333x255mm 11kg D4E180-BA V ac, 50/60Hz 87/420W 2260/ /57 327x371x287mm 11.9kgD4E200-BA V ac, 50/60Hz 87/700W 2600/ /57 327x370x287mm 12.1kgD4E225-BC V ac, 50/60Hz 87/1230W3730/ /57 387x392x298mm 16.3kgD4E250-BA List No. Order Code D2E097-BI D2E133-CI D2E133-DM27-D D4E133-AA D2E146-AP D2E146-AP Ì Dual inlet fans with an external rotor motor offering the advantage of matched motor and impeller in a compct space saving design Ì Motor are IP44 rated, sealed for life, maintenance free, class B insulation, precision ball bearings and side mounted capacitor and terminal block Ì Impeller is forward curved multi-vane type force fitted for vibration free operation and efficient cooling Ì Heavy duty body made from galvanised steel Ì May be mounted in any position List No. Order Code D4E160-EG D4E180-BA D4E200-BA , D4E225-BC , D4E250-BA , , DC Compact Blower Dimensions Voltage Power Air Flow Noise H W D V dc Watts cu ft/min dba@1m List No. Order Code BM W-B30-L BM W-B50-L BM W-B30-L BM W-B50-L BM W-B30-L BM W-B50-L BG0702-B BG0702-B BG0702-B BG0702-B BG0903-B BG0903-B BG0903-B BG0903-B BG1002-B BG1203-B BG1203-B Dimensions Voltage H W D Vdc Order Code mm Biscuit Ì High level of reliability Ì Precision ball bearing Ì Brushless DC Motor Ì Auto restart/reverse polarity protection Ì Housing - Plastic (Black) UL94V-0 (except 5910PL series Aluminium (Black)) Ì Impeller - Plastic (Black) UL94V-0 Ì UL/CSA/VDE/CE approved Ì RoHS Compliant Ì Single piece diecast aluminium venturi with plastic impeller Ì Termination via two 0.110" terminals Ì Sleeve bearings Ì Operating temperature: -10 C to 70 C Ì and complete with thermal speed control Voltage Power Airflow Noise Speed Dimensions (V dc) (Watts) (CFM) (dba) (RPM) (WxHxD) List No. Order Code x121x31 BD12S3H x121x31 BD24S3H x121x31 BD12B x121x31 BD24B Order Code ,000s more products available at Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

15 Farnell Page 723 Date: time:16: AC Blowers (Vacuum or Pressure) Ì In the ThruFlow configuration, the drive motor is in the working air system Ì Maximum pressure to 357mbar Ì Maximum air flow to 145 L/sec Ì Electrical and mechanical control versions Ì Adjustable air performance Ì Thermal protection/locked rotor protection Ì 120 or 240VAC electronically commutated blower with high flow fan system Ì Blower offers a fan system that can be used for either vacuum or pressure Ì Operating temperature 0-50 C Ì The drive system has a rectifier/filter network, a commutation controller and an electronically commutated DC motor Ì The drive system in the Bypass configuration has a cooling fan Ì Separation of cooling air and working air in bypass configuration Ì Working air is the cooling air in the Thru- Flow configuration Ì Compact size and long life Ì UL component recognised Ì CSA and TUV certified Height Outlet Type Stage VAC Max. Watts Max. Pressure Open Control Order List No. Tube Amps (mbar Sealed) Flow Type Code L/Sec Configuration: By Pass B Single Mechanical B Single Electrical B Single Mechanical B Two Mechanical B Two Electrical B Three Mechanical B Three Electrical E Single Mechanical E Single Electrical E Single Mechanical E Single Electrical E Two Mechanical E Two Electrical E Three Mechanical E Three Electrical E Three Mechanical E Three Electrical E Four Electrical H Single Mechanical H Single Electrical H Two Mechanical H Two Electrical H Three Mechanical H Three Electrical K Single Mechanical K Single Electrical K Two Mechanical K Two Electrical K Three Mechanical K Three Electrical Configuration: Thru Flow A Single Electrical A Two Electrical D Single Electrical List No. Order Code , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Fan Speed Controllers System 3000 Automatic Control for 12,24 and 48V dc The system 3000 is a comprehensive solution for the control and monitoring of PAPST DC fans, altogether providing a thermal management system for electronic equipment. It offers a modular approach enabling the monitor module to function as a seperate monitoring unit or as a complete system integrated with the Control Module Monitor Module Ì Monitoring for upto 6 DC fans or blowers with open collector alarm outputs Ì Alarm outputs for direct or remote fan status Ì Individual fan alarm output Ì Supports 12,24 or 48 Volt DC fans Ì Several fan fail threshold settings available Ì Easy to integrate and connect to equipment Ì Operates as a stand-alone monitor or can be combined with System 3000 Control Module H=38, W=63, L=175 Mounting 4 x 3.5mm holes, 50 x 165 cntrs Control Module Ì Temperature dependent speed control Ì Multiple point temperature sensing Ì Can support up to four thermistors Ì Can control any number of fans or blowers upto 65W total power consumption Ì Modules available for 12,24 or 48Vdc fans Ì Alarm outputs for over temperature and thermistor fail Ì Low temperature fan shutdown/standby mode Ì Fail safe operation for thermistor fail Ì Operates as a stand-alone controller or can be combined with System 3000 Monitor Module Monitor Module Input voltage 12 or 24 and 48Vdc ±10% Protection Reverse Polarity and power limiting on 5V supply Max power rating 50W direct module, connection and power leads can be connected externally if combined power ratings are greater than 50W Operating temperature 0 C to +70 C Humidity 40% to 80% Outputs Relay SPCO, 40Vdc/500mA for fan fail Monitor Module Open collector/20ma for fan status Control Module Input voltage 12, 24 or 48dc ±10% Protection Reverse polarity and power limiting on 5V supply Max power rating 65W Min power rating 5W Operating Temperature 0 C to +70 C Humidity 40% to 80% Outputs 40Vdc/500mA Relay SPCO for over temperature and thermistor fail open collector/20ma for over temperature, thermistor fail and standby mode Fan Order Price Per Pack Voltage List No. Code Monitor Module 24 & 48V dc S3000-M In stock and ready to despatch, 300,000 products in our Asia, US and Europe warehouses Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (65) ,000 products, stocked and ready to despatch 723