AXIAL FLOW CABINET FAN CGT Series
|
|
|
- Bertina Preston
- 5 years ago
- Views:
Transcription
1 Range of adjustable pitch aerofoil blade, axial flow cabinet fans. Fan casing manufactured from heavy gauge galvanised sheet steel internally lined with 25 mm thickness fireproof fibreglass acoustic insulation (M0). ll models incorporate separate high grade diecast aluminium blades locked within a pressed sheet steel hub. Constructive configuration models from 400 to 800 s vailable, depending upon the model: - with three phase motors in 4 or 6 poles. - with three phase two speed motors 4/8, 4/6 or 6/12 poles. ll the motors are IP55, Class F insulation. Electrical supplies: Three phase / /60* Hz up to 3 kw. (*Check Easyvent for 60Hz available models) Three phase V-50Hz, for higher motors and two speed motors. (See characteristics chart). dditional information Standard air direction: form configuration ( over Impeller). On request ir direction: form (B) configuration (Impeller over ). Single phase motors Hz up to 2,2kW. s with PTC. Constructive configuration models from 900 to 1250 TEX CGT TEX versions available for three phase models. For ambient working temperatures from -20ºC to +40ºC. TEX Flameproof-Gas II 2G Ex d IIB T4 II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor) TEX Increased safety- Gas II 2G Ex e II T3 TEX- Dust Suspended flammable particles and nonconductive dust: II 3D Ex tc IIIB T125ºC Conductive dust: II 3D Ex tc IIIC T125ºC (with IP65 motor) To select CGT TEX refer to performance curves for CHGT or Easyvent. Note electrical data may vary for TEX motors. Specific applications Versions 182
2 XIL FLOW CBINET FN Corrosion resistance Casings manufactured from galvanised sheet steel. Design enables the casing side panels to be removed and the motorimpeller assembly accessed. Easy to install Robust base supports facilitate the installation. (s from 900 to 1250). 1 Impeller dynamically balanced Impeller dynamically balanced, according to ISO 1940 standard, providing vibration free operation. 2 Wide blade design: higher pressure Wide blade design to ensure the highest efficient airflow performances. Configuration 1: models from 400 to Configuration 2: models from to REFERENCE C G 1 1-: 2-: 3-: 4-: 5-: 6-: 7-: T / / 8 5 / 6 1,5 kw 7 Product range. Number of poles. s. Number of blades. Blade pitch angle. irflow direction. Power. 183
3 TECHNICL CHRCTERISTICS - 2 poles rpm Before installation check that the product electrical characteristics listed on the data plate label (voltage,, frequency, etc.) match those of the intended electrical supply. current at 400V current at 400V CGT/ /-1, ,1 2,32 54 CGT/ /-1, ,5 3,07 57 CGT/ /-2, ,2 4,43 62 CGT/ /-1, ,5 3,07 61 CGT/ /-2, ,2 4,43 66 CGT/ / ,77 73 TECHNICL CHRCTERISTICS - 4 poles rpm current at 400V current at 400V CGT/ /-0, ,25 0,74 47 CGT/ /-0, ,25 0,74 51 CGT/ /-0, ,37 1,13 53 CGT/ /-0, ,55 1,38 56 CGT/ /-0, ,55 1,38 58 CGT/ /-0, ,75 1,62 60 CGT/ /-1, ,1 2,3 65 CGT/ /-0, ,55 1,38 57 CGT/ /-0, ,75 1,62 59 CGT/ /-1, ,1 2,3 64 CGT/ /-1, ,5 3,15 67 CGT/ /-2, ,2 4,56 74 CGT/ /-0, ,75 1,62 64 CGT/ /-1, ,1 2,3 69 CGT/ /-1, ,5 3,15 72 CGT/ /-2, ,2 4,56 79 CGT/ / ,15 85 CGT/ /-0, ,75 1,62 74 CGT/ /-1, ,1 2,3 79 CGT/ /-1, ,5 3,15 82 CGT/ /-2, ,2 4,56 89 CGT/ / ,15 95 CGT/ /-1, ,1 2,3 82 CGT/ /-1, ,5 3,15 85 CGT/ /-2, ,2 4,56 92 CGT/ / ,15 98 CGT/ / ,2 99 CGT/ /-1, ,1 2,3 84 CGT/ /-1, ,5 3,15 87 CGT/ /-2, ,2 4,56 94 CGT/ / , CGT/ / ,2 101 CGT/ /-5, ,5 10,3 130 CGT/ /-1, ,5 3,15 91 CGT/ /-2, ,2 4,56 98 CGT/ / , CGT/ / ,2 105 CGT/ /-5, ,5 10,3 134 CGT/ /-7, ,5 13,9 141 CGT/ / ,2 108 CGT/ /-5, ,5 10,3 137 CGT/ /-7, ,5 13,9 144 CGT/ /-2, ,2 4, CGT/ / , CGT/ / ,2 165 CGT/ /-5, ,5 10,3 194 CGT/ /-7, ,5 13,9 201 CGT/ / ,2 169 CGT/ /-5, ,5 10,3 198 CGT/ /-7, ,5 13,9 205 CGT/ / ,7 258 CGT/ / ,4 280 CGT/ /-5, ,5 10,3 202 CGT/ /-7, ,5 13,9 209 CGT/ / ,7 262 CGT/ / ,
4 TECHNICL CHRCTERISTICS - 4 poles rpm (CONTINUTION) current at 400V current at 400V CGT/ / , CGT/ / ,2 162 CGT/ /-5, ,5 10,3 191 CGT/ /-7, ,5 13,9 198 CGT/ / ,7 251 CGT/ / ,2 167 CGT/ /-5, ,5 10,3 196 CGT/ /-7, ,5 13,9 203 CGT/ / ,7 256 CGT/ / ,4 278 CGT/ /-18, ,5 34,9 310 CGT/ / ,9 331 CGT/ /-7, ,5 13,9 355 CGT/ / ,7 408 CGT/ / ,4 430 CGT/ /-18, ,5 34,9 462 CGT/ / ,9 483 CGT/ / ,6 531 CGT/ / ,4 435 CGT/ /-18, ,5 34,9 467 CGT/ / ,9 488 CGT/ / ,6 536 CGT/ / ,6 682 CGT/ / ,4 710 CGT/ /-5, ,5 10,3 201 CGT/ /-7, ,5 13,9 208 CGT/ / ,7 261 CGT/ / ,4 283 CGT/ /-18, ,5 34,9 315 CGT/ / ,9 336 CGT/ / ,4 440 CGT/ /-18, ,5 34,9 472 CGT/ / ,9 493 CGT/ / ,6 541 CGT/ / ,6 687 CGT/ / ,4 715 TECHNICL CHRCTERISTICS - 6 poles rpm current at 400V current at 400V CGT/ /-0, ,37 1,04 56 CGT/ /-0, ,55 1,61 63 CGT/ /-0, ,37 1,04 61 CGT/ /-0, ,55 1,61 68 CGT/ /-0, ,75 1,93 74 CGT/ /-1, ,1 2,69 76 CGT/ /-0, ,55 1,61 78 CGT/ /-0, ,75 1,93 84 CGT/ /-0, ,55 1,61 87 CGT/ /-0, ,75 1,93 93 CGT/ /-1, ,1 2,69 95 CGT/ /-1, ,5 3,7 99 CGT/ /-2, ,2 5, CGT/ /-1, ,1 2,69 98 CGT/ /-1, ,5 3,7 102 CGT/ /-2, ,2 5, CGT/ / , CGT/ /-0, ,55 1,61 81 CGT/ /-0, ,75 1,93 87 CGT/ /-1, ,1 2,69 89 CGT/ /-0, ,55 1,61 83 CGT/ /-0, ,75 1,93 89 CGT/ /-1, ,1 2,69 91 CGT/ /-1, ,5 3,7 159 CGT/ /-2, ,2 5, CGT/ /-1, ,5 3,7 163 CGT/ /-2, ,2 5, CGT/ / , CGT/ /-1, ,5 3,7 167 CGT/ /-2, ,2 5, CGT/ / ,
5 TECHNICL CHRCTERISTICS - 6 poles rpm (CONTINUTION) current at 400V current at 400V CGT/ /-1, ,5 3,7 156 CGT/ /-2, ,2 5, CGT/ / , CGT/ / ,1 188 CGT/ /-1, ,5 3,7 161 CGT/ /-2, ,2 5, CGT/ / , CGT/ / ,1 193 CGT/ /-5, ,5 12,5 213 CGT/ /-7, ,5 14,7 255 CGT/ /-2, ,2 5, CGT/ / , CGT/ / ,1 198 CGT/ /-5, ,5 12,5 218 CGT/ /-7, ,5 14,7 260 CGT/ /-2, ,2 5, CGT/ / , CGT/ / ,1 345 CGT/ /-5, ,5 12,5 365 CGT/ /-7, ,5 14,7 407 CGT/ / ,5 428 CGT/ / ,1 350 CGT/ /-5, ,5 12,5 370 CGT/ /-7, ,5 14,7 412 CGT/ / ,5 433 CGT/ / ,4 465 CGT/ /-5, ,5 12,5 375 CGT/ /-7, ,5 14,7 417 CGT/ / ,5 438 CGT/ / ,4 470 CGT/ /-18, ,5 37,3 513 CGT/ / TECHNICL CHRCTERISTICS - 2/4 poles /1450 rpm CGT/2/ /-1,1/0, ,1 0,25 2,5 0,66 52 CGT/2/ /-1,5/0, ,5 0,35 3,8 0,9 56 CGT/2/ /-2,2/0, ,2 0,6 4,8 1,5 57 CGT/2/ /-1,1/0, ,1 0,25 2,5 0,66 56 CGT/2/ /-1,5/0, ,5 0,35 3,8 0,9 60 CGT/2/ /-2,2/0, ,2 0,6 4,8 1,5 61 CGT/2/ /-3/0, ,8 6,6 1,7 70 TECHNICL CHRCTERISTICS - 4/8 poles /730 rpm CGT/4/ /-0,37/0, ,37 0,09 1,1 1,2 48 CGT/4/ /-0,37/0, ,37 0,09 1,1 1,2 52 CGT/4/ /-0,55/0, ,55 0,13 1,8 0,65 55 CGT/4/ /-0,55/0, ,55 0,13 1,8 0,65 57 CGT/4/ /-0,75/0, ,75 0,12 2,3 0,9 59 CGT/4/ /-1,1/0, ,1 0,26 2,8 1,2 61 CGT/4/ /-0,55/0, ,55 0,13 1,8 0,65 56 CGT/4/ /-0,75/0, ,75 0,12 2,3 0,9 58 CGT/4/ /-1,1/0, ,1 0,26 2,8 1,2 60 CGT/4/ /-1,7/0, ,7 0,35 4 1,6 63 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 67 CGT/4/ /-0,55/0, ,55 0,13 1,8 0,65 61 CGT/4/ /-0,75/0, ,75 0,12 2,3 0,9 63 CGT/4/ /-1,1/0, ,1 0,26 2,8 1,2 65 CGT/4/ /-1,7/0, ,7 0,35 4 1,6 68 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 72 CGT/4/ /-3/0, ,65 6,8 2,
6 TECHNICL CHRCTERISTICS - 4/8 poles /730 rpm (CONTINUTION) CGT/4/ /-0,55/0, ,55 0,13 1,8 0,65 71 CGT/4/ /-0,75/0, ,75 0,12 2,3 0,9 73 CGT/4/ /-1,1/0, ,1 0,26 2,8 1,2 75 CGT/4/ /-1,7/0, ,7 0,35 4 1,6 78 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 82 CGT/4/ /-3/0, ,65 6,8 2,5 88 CGT/4/ /-1,1/0, ,1 0,26 2,8 1,2 78 CGT/4/ /-1,7/0, ,7 0,35 4 1,6 81 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 85 CGT/4/ /-3/0, ,65 6,8 2,5 91 CGT/4/ /-4/0, ,75 8,7 3,5 102 CGT/4/ /-1,1/0, ,1 0,26 2,8 1,2 80 CGT/4/ /-1,7/0, ,7 0,35 4 1,6 83 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 87 CGT/4/ /-3/0, ,65 6,8 2,5 93 CGT/4/ /-4/0, ,75 8,7 3,5 104 CGT/4/ /-5/ ,9 3,3 115 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 126 CGT/4/ /-1,7/0, ,7 0,35 4 1,6 87 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 91 CGT/4/ /-3/0, ,65 6,8 2,5 97 CGT/4/ /-4/0, ,75 8,7 3,5 108 CGT/4/ /-5/ ,9 3,3 119 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 130 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 146 CGT/4/ /-3/0, ,65 6,8 2,5 100 CGT/4/ /-4/0, ,75 8,7 3,5 111 CGT/4/ /-5/ ,9 3,3 122 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 133 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 149 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 151 CGT/4/ /-3/0, ,65 6,8 2,5 157 CGT/4/ /-4/0, ,75 8,7 3,5 168 CGT/4/ /-5/ ,9 3,3 179 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 190 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 206 CGT/4/ /-3/0, ,65 6,8 2,5 161 CGT/4/ /-4/0, ,75 8,7 3,5 172 CGT/4/ /-5/ ,9 3,3 183 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 194 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 210 CGT/4/ /-10,5/2, ,5 2,2 21 7,4 229 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 252 CGT/4/ /-4/0, ,75 8,7 3,5 176 CGT/4/ /-5/ ,9 3,3 187 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 198 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 214 CGT/4/ /-10,5/2, ,5 2,2 21 7,4 233 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 256 CGT/4/ /-2,3/0, ,3 0,5 5,2 1,9 148 CGT/4/ /-3/0, ,65 6,8 2,5 154 CGT/4/ /-4/0, ,75 8,7 3,5 165 CGT/4/ /-5/ ,9 3,3 176 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 187 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 203 CGT/4/ /-10,5/2, ,5 2,2 21 7,4 222 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 245 CGT/4/ /-4/0, ,75 8,7 3,5 170 CGT/4/ /-5/ ,9 3,3 181 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 192 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 208 CGT/4/ /-10,5/2, ,5 2,2 21 7,4 227 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 250 CGT/4/ /-17/3, , CGT/4/ /-22/4, , CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 197 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 213 CGT/4/ /-10,5/2, ,5 2,2 21 7,4 232 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 255 CGT/4/ /-17/3, , CGT/4/ /-22/4, ,
7 TECHNICL CHRCTERISTICS - 4/8 poles /730 rpm (CONTINUTION) CGT/4/ /-5/ ,9 3,3 333 CGT/4/ /-6,8/1, ,8 1,4 13,7 5,1 344 CGT/4/ /-8,4/2, ,4 2,05 16,6 6,2 360 CGT/4/ /-10,5/2, ,5 2,2 21 7,4 379 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 402 CGT/4/ /-17/3, , CGT/4/ /-22/4, , CGT/4/ /-33/ CGT/4/ /-15,5/2, ,5 2,7 30 9,5 412 CGT/4/ /-17/3, , CGT/4/ /-22/4, , CGT/4/ /-33/ CGT/4/ /-42/ CGT/4/ /-50/ CGT/4/ /-10,5/2, ,5 2,2 21 7,4 384 CGT/4/ /-15,5/2, ,5 2,7 30 9,5 407 CGT/4/ /-17/3, , CGT/4/ /-22/4, , CGT/4/ /-33/ CGT/4/ /-42/ TECHNICL CHRCTERISTICS - 4/6 poles /950 rpm CGT/4/ /-0,5/0, ,5 0,19 1,4 0,7 55 CGT/4/ /-0,66/0, ,66 0,25 1,75 0,8 56 CGT/4/ /-0,5/0, ,5 0,19 1,4 0,7 57 CGT/4/ /-0,66/0, ,66 0,25 1,75 0,8 58 CGT/4/ /-1/0, ,3 2,5 1,2 61 CGT/4/ /-0,5/0, ,5 0,19 1,4 0,7 56 CGT/4/ /-0,66/0, ,66 0,25 1,75 0,8 57 CGT/4/ /-0,78/0, ,78 0, CGT/4/ /-1,5/0, ,5 0,45 3,5 1,6 63 CGT/4/ /-1/0, ,3 2,5 1,2 60 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 70 CGT/4/ /-0,66/0, ,66 0,25 1,75 0,8 62 CGT/4/ /-0,78/0, ,78 0, CGT/4/ /-1,5/0, ,5 0,45 3,5 1,6 68 CGT/4/ /-1/0, ,3 2,5 1,2 65 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 75 CGT/4/ /-0,66/0, ,66 0,25 1,75 0,8 72 CGT/4/ /-0,78/0, ,78 0, CGT/4/ /-1,5/0, ,5 0,45 3,5 1,6 78 CGT/4/ /-1/0, ,3 2,5 1,2 75 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 85 CGT/4/ /-0,78/0, ,78 0, CGT/4/ /-1,5/0, ,5 0,45 3,5 1,6 81 CGT/4/ /-1/0, ,3 2,5 1,2 78 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 88 CGT/4/ /-3/ ,85 3, CGT/4/ /-1,5/0, ,5 0,45 3,5 1,6 83 CGT/4/ /-1/0, ,3 2,5 1,2 80 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 90 CGT/4/ /-3/ ,85 3, CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 115 CGT/4/ /-6/ ,6 126 CGT/4/ /-1,5/0, ,5 0,45 3,5 1,6 87 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 94 CGT/4/ /-3/ ,85 3, CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 119 CGT/4/ /-6/ ,
8 TECHNICL CHRCTERISTICS - 4/6 poles /950 rpm (CONTINUTION) CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 122 CGT/4/ /-6/ ,6 133 CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 154 CGT/4/ /-3/ ,85 3, CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 179 CGT/4/ /-6/ ,6 190 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 224 CGT/4/ /-3/ ,85 3, CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 183 CGT/4/ /-6/ ,6 194 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 228 CGT/4/ /-14/4, , CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 187 CGT/4/ /-6/ ,6 198 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 232 CGT/4/ /-14/4, , CGT/4/ /-2,5/0, ,5 0,8 5,5 2,5 151 CGT/4/ /-3/ ,85 3, CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 176 CGT/4/ /-6/ ,6 187 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 221 CGT/4/ /-14/4, , CGT/4/ /-4,5/1, ,5 1,5 9,2 5,1 181 CGT/4/ /-6/ ,6 192 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 226 CGT/4/ /-14/4, , CGT/4/ /-16/ ,5 264 CGT/4/ /-20/6, , CGT/4/ /-6/ ,6 197 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 231 CGT/4/ /-14/4, , CGT/4/ /-16/ ,5 269 CGT/4/ /-20/6, , CGT/4/ /-6/ ,6 344 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 378 CGT/4/ /-14/4, , CGT/4/ /-16/ ,5 416 CGT/4/ /-20/6, , CGT/4/ /-23/7, , CGT/4/ /-30/ ,2 485 CGT/4/ /-10,5/3, ,5 3,5 21 8,6 383 CGT/4/ /-14/4, , CGT/4/ /-16/ ,5 421 CGT/4/ /-20/6, , CGT/4/ /-23/7, , CGT/4/ /-30/ ,2 490 CGT/4/ /-34/ CGT/4/ /-42/ CGT/4/ /-14/4, , CGT/4/ /-16/ ,5 426 CGT/4/ /-20/6, , CGT/4/ /-23/7, , CGT/4/ /-30/ ,2 495 CGT/4/ /-34/ CGT/4/ /-42/ TECHNICL CHRCTERISTICS - 6/12 poles - 950/475 rpm CGT/6/ /-0,4/0, ,4 0,08 1,2 0,7 56 CGT/6/ /-0,75/0, ,75 0,12 2,4 0,9 63 CGT/6/ /-0,4/0, ,4 0,08 1,2 0,7 71 CGT/6/ /-0,75/0, ,75 0,12 2,4 0,9 78 CGT/6/ /-0,4/0, ,4 0,08 1,2 0,7 61 CGT/6/ /-0,75/0, ,75 0,12 2,4 0,9 68 CGT/6/ /-0,4/0, ,4 0,08 1,2 0,7 74 CGT/6/ /-0,75/0, ,75 0,12 2,4 0,9 81 CGT/6/ /-1,1/0, ,1 0,18 3,2 1,
9 TECHNICL CHRCTERISTICS - 6/12 poles - 950/475 rpm (CONTINUTION) CGT/6/ /-0,4/0, ,4 0,08 1,2 0,7 76 CGT/6/ /-0,75/0, ,75 0,12 2,4 0,9 83 CGT/6/ /-1,1/0, ,1 0,18 3,2 1,2 84 CGT/6/ /-0,75/0, ,75 0,12 2,4 0,9 87 CGT/6/ /-1,1/0, ,1 0,18 3,2 1,2 88 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 96 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 108 CGT/6/ /-3/0, ,55 8 3,8 126 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 99 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 111 CGT/6/ /-3/0, ,55 8 3,8 129 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 322 CGT/6/ /-3/0, ,55 8 3,8 340 CGT/6/ /-4/0, ,65 10,4 3,1 345 CGT/6/ /-5,5/ ,5 1 14,1 5,4 353 CGT/6/ /-7,5/1, ,5 1,3 17,5 5,5 371 CGT/6/ /-11/1, ,8 26, CGT/6/ /-3/0, ,55 8 3,8 345 CGT/6/ /-4/0, ,65 10,4 3,1 350 CGT/6/ /-5,5/ ,5 1 14,1 5,4 358 CGT/6/ /-7,5/1, ,5 1,3 17,5 5,5 376 CGT/6/ /-11/1, ,8 26, CGT/6/ /-15/2, ,5 33,4 10,4 436 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 156 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 168 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 160 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 172 CGT/6/ /-3/0, ,55 8 3,8 190 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 164 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 176 CGT/6/ /-3/0, ,55 8 3,8 194 CGT/6/ /-4/0, ,65 10,4 3,1 355 CGT/6/ /-5,5/ ,5 1 14,1 5,4 363 CGT/6/ /-7,5/1, ,5 1,3 17,5 5,5 381 CGT/6/ /-11/1, ,8 26, CGT/6/ /-15/2, ,5 33,4 10,4 441 CGT/6/ /-18,5/ ,5 3 38,2 11,5 500 CGT/6/ /-25/4, ,5 52,2 16,6 530 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 153 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 165 CGT/6/ /-3/0, ,55 8 3,8 183 CGT/6/ /-4/0, ,65 10,4 3,1 188 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 158 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 170 CGT/6/ /-3/0, ,55 8 3,8 188 CGT/6/ /-4/0, ,65 10,4 3,1 193 CGT/6/ /-5,5/ ,5 1 14,1 5,4 201 CGT/6/ /-1,5/0, ,5 0,25 4 1,5 163 CGT/6/ /-2,2/0, ,2 0,37 5,6 2,1 175 CGT/6/ /-3/0, ,55 8 3,8 193 CGT/6/ /-4/0, ,65 10,4 3,1 198 CGT/6/ /-5,5/ ,5 1 14,1 5,4 206 CGT/6/ /-7,5/1, ,5 1,3 17,5 5,
10 DIMENSIONS s 400 to 800 B C D E F D E C F D B , , , , s 900 to 1250 B C D E F G H D E C F D B , , , , , ,5 80 G H MOUNTING CCESSORIES PER-CR CHGT/CGT Back pressure louvre with steel frame and resistant light-weight aluminium blades, with a device which allows a perfect and coordinate opening of the blades. RL 7012 color. These louvres include safety net. Louvres to be used jointly with CHGT and CGT fans to avoid air returns in parallel installations. Dimensions in mm. (Interior measurement) E PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT PER-CR CHGT/CGT
11 MOUNTING CCESSORIES CVD CGT/CHGT Protection guards Wire protection guards for mounting on the inlet or discharge sides of the cabinets. 70 B cabinet Inlet and discharge Protection guard model B CGT-400 CVD CHGT/CGT ,5 CGT-450 CVD CHGT/CGT ,5 CGT-500 CVD CHGT/CGT ,5 CGT-560 CVD CHGT/CGT ,5 CGT-630 CVD CHGT/CGT ,5 CGT-710 CVD CHGT/CGT ,8 CGT-800 CVD CHGT/CGT ,5 560,2 CGT-900 CVD CHGT/CGT ,5 616,2 CGT-1000 CVD CHGT/CGT ,5 675 CGT-1250 CVD CHGT/CGT ,5 798,3 Dimensions in mm. COP RECT CHGT/ CGT F400 Rectangular flexible connector. 130 cabinet B COP RECT CHGT/CGT 400 F COP RECT CHGT/CGT 450 F COP RECT CHGT/CGT 500 F COP RECT CHGT/CGT 560 F COP RECT CHGT/CGT 630 F B COP RECT CHGT/CGT 710 F COP RECT CHGT/CGT 800 F COP RECT CHGT/CGT 900 F Dimensions in mm. COP RECT CHGT/CGT 1000 F COP RECT CHGT/CGT 1250 F
CGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
CGT Series Adjustable Pitch Fans
AXIAL FLOW CABINET FAN CGT Series Adjustable Pitch Fans New Ø 400-450-500 Range of adjustable pitch aerofoil blade, axial flow cabinet fans.fan casing manufactured from heavy gauge galvanised sheet steel
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series - ADJUSTABLE PITCH FANS
- ADJUSTABLE PITCH FANS Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dip galvanised finish. All models incorporate
BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
CYLINDRICAL CASED AXIAL FLOW FANS
- Adjustable pitch fans Range of adjustable pitch aerofoil blade, cased axial flow fans. Casings formed from rolled sheet steel with a corrosion resistant hot dipped galvanised finish. All models incorporate
BELT DRIVEN CABINET FANS CVTT Series
Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal
TGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot
TGT Series Adjustable Pitch Fans
CYLINDRICAL CASED AXIAL FLOW FANS Series Adjustable Pitch Fans Range of adjustable pitch aerofoil blade, cased axial flow fans.casings formed from rolled sheet steel with a corrosion resistant hot dipped
Short casing. Long casing (L version) Highly versatile range due to different number of available blades and adjustable pitch angles
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Additional Information Standard air direction: form (B) configuration (Impeller over ). models description: incorporated an "L" after blade pitch angle. E.g.
ACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
ROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
Short casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
In-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
CVHT Series - F rated cabinet fans
N 50-55 1/1/08 19:26 Página 50 BLT DRIVN BINT NS Series - 00 120 rated cabinet fans NW pproved to N12101- standard Range of belt drive cabinet fans designed for smoke extraction in fire conditions and
CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
Plate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
ROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength
SERIES R - MD MOR & GOR
SERIES R - MD MOR & GOR CHARACTERISTICS OPTIONS Aluminium alloy construction Surface protection treatment (anodising, only for ATEX 2 versions) Available in monoblock execution (MOR) and with coupling
AXIAL FAN WITH EXTERNAL ROTOR MOTOR
XIL FN ITH EXTERNL ROTOR MOTOR 1. YF series axial fans are external rotor motors. These motors have characteristics of compact structure, convenient installation and high efficiency etc. 2. YF series external
COMPACT Series type HCFB / HCFT (Plastic impellers)
Plate mounted axial flow fans COMPACT HCFB/HCFT PLATE MOUNTED AXIAL FLOW FANS COMPACT Series type HCFB / HCFT (Plastic impellers) 0 017582 603079 Compact design Corrosion resistance Flame retardant terminal
ACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
MAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
For ATEX zone 1/1, 22/22 and 21/21. Work area: Max. pressure: 5,800Pa Max. air volume: 32,500m³/h
For ATEX zone 1/1, 22/22 and 21/21 Centrifugal fan with closed fan wheel that is used at source extraction from air pollulant or chip making work processes. The transported air may not contain adhestive
Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
Sabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
CMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
CONTINUO. Radial centrifugal impeller. Radial centrifugal impellers dynamically balanced, according to ISO 1940 standard,
RADIAL CENTRIFUGAL FANS CBT-N Series CONTINUO Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC(1). The casings are manufactured from
supplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
Series TDA DIRECT DRIVEN MODEL: TDA- 450/9AA/8-8/ / Construction. Airflow Direction
DIRECT DRIVEN Series TDA Construction Double flanged casing is produced in mild steel or galvanised steel, available in short and long cased. The impeller having manually adjustable pitch blades is made
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
Centrifugal medium-pressure fans fitted with multi-blade
CMP/ATEX CMP/ATEX impeller Centrifugal medium-pressure fans fitted with multi-blade with ATEX certification Centrifugal single-inlet, medium-pressure fans with casing and sheet steel impeller to work in
AC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
Uniclass L7534. Manufacture controlled to ISO9001
CABINET & TWIN FANS FOR INDUSTRIAL / COMMERCIAL USE "ACFS" - Quiet Duct Centrifugal - Single Fan "DMTSQ" - Quiet Duct Centrifugal - Twin Fan "RMS" - Roof Centrifugal - Single Fan "RMTS" - Roof Centrifugal
CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
CHMT Series, F Rated Fans
CNTRIFUGAL SINGL INLT FANS CT Series, F400 120 Rated Fans Officially approved to N12101-3 standard (certificate number 0370-CPD-0348) Range of single inlet direct drive centrifugal fans designed for smoke
Multifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
Axial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
ROOFMASTER STEF-ATEX ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...
Performance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572
FEATURES Computer designed, efficient performance, forward curved blower. Blower wheel hub is secured to the shaft with a locking keyway. Blower is secured to anti-vibration mounts within the cabinet.
CONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
ROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for
GigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
CENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
IN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
DIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
Centrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
Duct Fans - ESTOC EC Range. Estoc EC Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630. Product Code
Tubes and ox Fans Duct Fans - ESTOC EC Range Features Sizes from 55 to 6 mm diameter ir flow 19, m /h (4. m /s) Static pressures up to 84 Pa Maximum temperature up to 6 C Controllable external rotor motors
REVOLUTION SLCX Product Brochure
REVOLUTION SLCX Brochure Available for next day delivery with ELTA SELECT ATEX Long Cased Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
Dynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
HCH/ATEX: Robust wall-mounted axial fans with ATEX certification HCT/ATEX: Robust long-cased axial fans with ATEX certification
HCH/ATEX HCT/ATEX HCH/ATEX: Robust wall-mounted axial fans with ATEX certification HCT/ATEX: Robust long-cased axial fans with ATEX certification Circular axial fans (HCH) or Long-cased fans (HCT) with
ExpressBuild STANDARD FAN RANGE
AIR COMFORT FIRE SAFETY ExpressBuild STANDARD FAN RANGE OUR SHORT LEAD TIME FAN RANGE ExpressBuild CONCEPT & PRINCIPLES When a short lead time solution is important, choose an ExpressBuild Fan product
MTD Silent Series MIXED FLOW IN-LINE DUCT FAN
MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General
CYCLONE F 400 smoke extraction casing
Fire protection CYCLONE F smoke extraction casing Presentation of the CYCLONE F range (12) WHY CHOOSE A CYCLONE F? In order to fulfil the requirements of the CE markings (EN 1211-3 and the French governmental
CMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C
BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured
V.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes
Comfort ventilation Very wide flow rate range : 0.11 to 9.72 m 3 /s Standard version with lacquered finish casing APPLICATION ventilation are designed for the ventilation of tertiary or industrial buildings,
CJBX CJBX/AL. Options. Order code CJBX 15/15 4. Technical characteristics
CJBX CJBX/AL CJBX: Belt-driven acoustically-insulated ventilation units. CJBX/AL: Belt-driven ventilation units with aluminium profiles and prefinished sheet steel and acoustic insulation. CJBX Options
ErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR
13 POWERBOX EC FANS - ESTOC EC FEATURES Sizes from 3 to 3 mm diameter Air flow up to.1 m 3 /s Static pressures up to Pa Controllable EC motors Multiple outlet orientations ELECTRICAL SUPPLY 22-2V/Hz/1f
Multifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
Explanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
AAVC. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES:
AAVC HIGH PRESSURE WITH BACKWARD IMPELLER MANUFACTURING FEATURES: Accessories Fan made of Fe360 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average
MIXVENT-TH Series Mixed Flow Fans
ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured
IN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
Centriflow Plus EC. Technical data
Technical data Centriflow Plus CTLOGUE Contents General description...3 General survey chart...4 Design description Fan Impeller...5 Inlet cone and supporting frame...5 EC motor...5 ir flow sensor...6
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
Powerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
MTB /183 A-F-A-BQQV 400D-2 11kW
GRUNDFOS DATA BOOKLET MTB 65-2/13 A-F-A-BQQV D-2 11kW Grundfos Pump 965751 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/965751/mtb-65-2-13-a-f-a-bqqv.html
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
RADIAL ALUMINUM LOW PRESSURE
RADIAL ALUMINUM LOW PRESSURE Content LOW PRESSURE BLOWERS... 2 GENERAL... 3 D03M, E03... 4 D04M, E04... 5 D045M, E045... 6 D05M, E05... 7 D052M, E052... 8 D060, E060... 9 D064, E064... 10 D066, E066...
CSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
BIFLOW SB CON Product Brochure
BIFLOW SB CON Brochure Available for next day delivery with ELTA SELECT Bifurcated Conical Axial Flow Fan For full detailed information on the following: Sound Data, Accessories & Wiring Data and Optimum
MTB /158 A-F-A-BQQV 400D-2 5,5kW
GRUNDFOS DATA BOOKLET MTB 5-1/158 A-F-A-BQQV D- 5,5kW Grundfos pump 95879 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/mtb/95879/mtb-5-1-158-a-f-a-bqqv.html
VALIADIS S.A. HELLENIC MOTORS
Explosion proof motors MAK 56-250 (MAKe 63-250) series Groups IIB and IIC Ex db / Ex db e (EPL) executions Gb or Ex tb IIIC (EPL) Db II 2 G, II 2D, 2GD SAFETY INSTRUCTIONS Safety Instructions MAK and MAKe
Max. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
Bifurcated Case Axial Fans (BIFA)
Bifurcated Case Axial Fans (BIFA) Sizes 250 to 1000 dia Motors protected to IP55 Motor insulation Class F Maximum ambient temperature 200 C Speed controllable via transformer or inverter (when the ambient
ErP PLASTIC TUBE FANS - ESPADA FEATURES. ELECTRICAL SUPPLY V/50Hz/1f SIZES TEMPERATURE RANGE FEATURES AND CONSTRUCTION PRODUCT CODE
83 PLASTIC TUBE FANS - ESPADA FEATURES mm to 315 mm diameter Air flow up to.35 m 3 /s Static pressures up to 58 Pa Plastic cased centrifugal fan Low noise levels Corrosion resistant design Easy electrical
AATVP. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES:
AATVP HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES: Accessories Fan made of Fe36 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved
The Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
Square Mixed Flow Fans (MFQ)
Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are
Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.
HCH HCH Extremely robust wall-mounted, axial or tubular fans Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor. Fan: Airflow direction from
THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
NALSRF BELT DRIVE ACOUSTIC SINGLE EXTERNAL ROOF FANS
NALSRF BELT DRIVE ACOUSTIC SINGLE EXTERNAL ROOF FANS External roof mounted single fan unit manufactured from aluzinc. 7.111 +44 (0) 29 2085 8515 BENEFITS Hard wearing on site External single fan unit manufactured
Powerful centrifugal fans for universal use: The product ranges TEM and REM
Powerful centrifugal fans for universal use: The product ranges TEM and REM The fan ranges TEM and REM offered by Nicotra Gebhardt do present a large fan programme of single inlet centrifugal fans which
MAXFAN COMPAC » OFFERING HIGH PERFORMANCE, ROBUST DESIGN AND FLEXIBLE CONTROL AIR COMFORT FIRE SAFETY AIR MOVEMENT
AIR COMFORT FIRE SAFETY AIR MOVEMENT MAXFAN COMPAC» OFFERING HIGH PERFORMANCE, ROBUST DESIGN AND FLEXIBLE CONTROL INTRODUCING THE MAXFAN COMPAC THE NEW MAXFAN COMPAC DESIGNED FOR THE KITCHEN CANOPY MARKET
Motors and drives for applications in explosive atmospheres
Motors and drives for applications in explosive atmospheres Certification. Diligence. Reliability. Safety. Everything counts Operating processes in explosive (Ex) atmospheres requires the right mix of
ROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
Terminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.
EuroSeries (ESR) Cowl & base moulded from recyclable polymeric material All sizes resistant to UV light Sizes 250 to 1000 dia are protected to IP54 Optional backdraught shutters and bird guard (250-630mm)
Section 4. Axial Fans - Section 4
Axial Flow Fans Section 4 Fläkt Woods offers a wide range of axial flow fans for general air movement and special applications such as emergency high temperature smoke extract and pressurisation. ATEX
CMP-L/EW B T D. Industrial Brushless Motors E.C. Motor power (CV) Three-phase VSD 400 V50/60 Hz. electrical power Maximum.
CMP-L/EW BRUSHLESS INDUSTRIAL BRUSHLESS MOTOR E.C. VARIABLE SPEED DRIVE VSD: Variable Speed Drive.. VSD1/B. VSD3/B Supply included with fan CONTROL Supply optional accesory SUPPLY VSD1/B: 220-240 V 50/60