Information. DC axial fans. DC axial fans. DC axial fan overview 27 DC axial fan / DC diagonal fan

Transcription

1 Information DC axial fan overview 27 DC axial fan / DC diagonal fan Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

2 Technical information Product line ebm-papst offers you the widest full product line of DC axial and diagonal fans from 25 mm to 280 mm in size. Every single type of fan can be optimally integrated in the respective device concept. The highly economical brushless motor technology of these fans provides a unique variety of intelligent innovations at prices that would have been unthinkable a few years ago. Electronic protection against reverse polarity ebm-papst DC fans have electronically commutated drives with electronic protection against reverse polarity. The electronics are integrated in the fan s impeller hub to save space. Many of our DC fans can be operated on voltages that are up to 50% lower and 25% higher than their nominal voltage (see voltage range in the technical tables). This allows the air performance to be adapted to the cooling requirements and the noise to be reduced, even if the fan does not have a control input. Closed-loop speed control and monitoring Closed-loop speed control and function monitoring are becoming increasingly important in many applications. ebm-papst offers many fans in the standard design with a control input and open-collector speed signal. Product life expectancy A distinctive feature of DC fan technology is the amazing product life expectancy. The outstanding efficiency of the brushless drive results in lower heat stress for the bearings, which significantly increases the service life of the fan. Degree of protection DC fans with sleeve and ball bearings are powered by class E insulated motors. All ebm-papst fans conform to the requirements of degree of protection IP 20. Fans conforming to IP 54 / IP 68 and special degrees of protection are also available. S-Force The new S-Force fans with their extremely high blower capacity of up to 1100 m 3 /h and pressure increase of up to 1400 pascals are capable of dealing with the extreme heat load. If needed, these fans can produce up to 100% more output under full load, and they work with a much broader delivery bandwidth than current models. This makes them ideal for equipment and systems with a high density of components. Thanks to intelligent motor features, they can be adapted individually for any application. S-Force fans are available in standard dimensions. The air flow rate is amazing! S-Panther S-Panther power delivered quietly. Wherever there is need for power and reduced noise, fans from the S-Panther range are the right solution. A strong pressure saddle curve at optimum air flow provides the power of a real big cat, an S-Panther. 26

3 Axial fans for DC operation Overview of air performance Information Dimension Series Page mm m 3 /h c 25 x c 40 x F c 40 x c 40 x J c 50 x F c 60 x F c 60 x c 60 x c 60 x N c 60 x N VARIOFAN c 60 x J c 70 x F c 80 x c 80 x N c 80 x N VARIOFAN c 80 x c 80 x J c 92 x N c 92 x N VARIOFAN c 92 x N c 92 x J c 92 x J c 119 x F Ø F 91 NEW 54 c 119 x FN c 119 x c 119 x VARIOFAN m 3 /h Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

4 Axial fans for DC operation Overview of air performance Dimension Series Page mm m 3 /h c 119 x /59 c 119 x N c 119 x NHH..NH c 119 x NH7..NH c 119 x 38 DV c 127 x N c 127 x 38 DV c 135 x N c 140 x c 140 x TD Ø 150 x N Ø 150 x N x 150 x x 150 x TD x 160 x 51 DV x 160 x 51 DV 6400 TD x 160 x TD Ø 172 x N Ø 172 x NTD Ø 172 x Ø 172 x TD Ø 172 x 51 DV 6300 TD x200x FTD c 225 x 80 K1G c 225 x 89 K3G Ø 250 W1G Ø 300 *1G m 3 /h

5 Axial fans for DC operation Overview of technically feasible designs Information Axial fans Dimension mm Series OPTIONAL P. c 25 x yes 31 c 40 x F yes 32 c 40 x yes 33 c 40 x J yes 34 c 50 x F yes 35 c 60 x F yes 36 c 60 x yes 37 c 60 x yes 38 c 60 x N yes / 39 c 60 x N VARIOFAN yes / 40 c 60 x J yes 41 c 70 x F yes 42 c 80 x yes / 43 c 80 x N yes / 44 c 80 x N VARIOFAN yes 45 c 80 x yes 46 c 80 x J yes 47 c 92 x N yes / 48 c 92 x N VARIOFAN yes 49 c 92 x N yes 50 c 92 x J yes 51 c 92 x J yes 52 c 119 x F yes / 53 NEW Ø F yes 54 c 119 x FN yes 55 c 119 x yes / 56 c 119 x VARIOFAN yes 57 not yet available Available VDE, UL, CSA Speed signal Go / NoGo alarm Alarm with speed limit External temperature sensor Internal temperature sensor PWM control input Analog control input Multi-options control input SINTEC sleeve bearings / ball bearings Sleeve bearings Moisture protection IP >= 54 IP 68 Salt spray protection Reversible direction of rotation Page Please note that these special versions are not possible for all voltages and speeds, and not in all combinations. The special versions are designed for specific customers and projects. As a rule, they are not available off the shelf and are based on minimum quantities. Please consult your customer support representative about the feasibility of your special variant. 29 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

6 Axial fans for DC operation Overview of technically feasible designs Axial fans Dimension VDE, UL, CSA Speed signal Go / NoGo alarm Alarm with speed limit External temperature sensor Internal temperature sensor PWM control input Analog control input Multi-options control input SINTEC sleeve bearings / ball bearings Moisture protection IP >= 54 IP 68 Salt spray protection Reversible direction of rotation Page mm Series OPTIONAL P. c 119 x ja 58/59 c 119 x N ja / 60 c 119 x NH..NH6 ja 61 Please note that these special versions are not possible for all voltages and speeds, and not in all combinations. The special versions are designed for specific customers and projects. As a rule, they are not available off the shelf and are based on minimum quantities. c 119 x NH7..NH8 ja 62 c 119 x 38 DV 4100 ja 63 c 127 x N ja 64 c 127 x 38 DV 5200 ja 65 c 135 x N ja 66 c 140 x ja 67 c 140 x TD ja 68 Ø 150 x N ja 69 Ø 150 x N ja x 150 x ja x 150 x TD ja x 150 x 51 DV 6400 ja x 150 x 51 DV 6400 TD ja x 160 x TD ja 75 Ø 172 x N ja 76 Ø 172 x NTD ja 77 Ø 172 x ja 78 Ø 172 x TD ja 79 Ø 172 x 51 DV 6300 TD ja 80 Ø 200 x FTD ja 81 c 225 x 80 K1G 200 ja 82 c 225 x 89 K3G 200 ja 84 Subject to alterations Please consult your customer support representative about the feasibility of your special variant. not yet available Available Sleeve bearings 30

7 Max. 4.6 m 3 /h 25 x 8 mm Information Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 28, Weight: 5 g Series M < / N < / H / * N < / H / * Air performance measured as per: ISO Installation category A, without accidental contact. L p A measured at 1 m distance from fan axis. Service life L 10 (20 C) Service life L 10 (60 C) * at 55 C 31 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

8 Max. 9 m 3 /h 40 x 10 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 28, Highlights: Some models are suitable for use at high ambient temperatures Weight: 17 g Series 400 F Service life L 10 (20 C) Service life L 10 (60 C) 405 F / FH / FM / F / FH / F / FH / Model with temperature range up to +85 C. 412 FM / F / FH / L p A measured at 1 m distance from fan axis. 32

9 Max m 3 /h 40 x 20 mm Information Series 400 Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 28, Highlights: Some models are suitable for use at high ambient temperatures Weight: 27 g L p A measured at 1 m distance from fan axis / / H / / H / / Model with temperature range up to +85 C. Service life L 10 (20 C) Service life L 10 (60 C) 33 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

10 Max. 38 m 3 /h 40 x 28 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 28, UL 1061 Weight: 45 g - Salt spray protection Series 420 J 422 JM / JN / JH / JM / JN / JH / L p A measured at 1 m distance from fan axis. Ø 42,5 ± 0,3 34

11 Max. 20 m 3 /h 50 x 15 mm Information Series 500 F Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 28, Highlights: Some models are suitable for use at high ambient temperatures Weight: 27 g L p A measured at 1 m distance from fan axis. 512 F / F / FL / F / Model with temperature range up to +85 C. Service life L 10 (20 C) Service life L 10 (60 C) 35 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

12 Max. 33 m 3 /h 60 x 15 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 28, Highlights: Some models are suitable for use at high ambient temperatures Weight: 30 g Series 600 F Service life L 10 (20 C) Service life L 10 (60 C) 605 F / FL / F / FH / F / F/39 H / Model with temperature range up to +80 / 85 C. 612 FL / F / L p A measured at 1 m distance from fan axis. 36

13 Max. 67 m 3 /h 60 x 25 mm Information Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Highlights: Very low-noise motor Weight: 85 g Series 620 Type m 3 /hcfm VDC VDC db(a) Bel(A) / Watts rpm -1 C Hours Hours 622 L / M / N / H / HH / ƒ 622/2 H3P / L / M / N / H / HH / ƒ 624/2 H3P / HH / ƒ L p A measured at 1 m distance from fan axis. 37 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

14 Max. 58 m 3 /h 60 x 25 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Highlights: Developed for applications with demanding environmental requirements Weight: 70 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series NU / /2 HPU / NU / HHU / /2 HHPU / /2 HPU / L p A measured at 1 m distance from fan axis. 38

15 Max. 56 m 3 /h 60 x 25 mm Information Series 600 N Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Highlights: Some models are suitable for use at high ambient temperatures up to 85 C. Weight: 66 g L p A measured at 1 m distance from fan axis. - Degree of protection: IP 54 / IP NGLE / NLE / NGMLE / NMLE / NGME / NME / NN / NH / ƒ 612 NHH / NGL / NL / NGML / NML / NGM / NM / NN / NH / ƒ 614 NHH / NHH / NM / NN / Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

16 Max. 41 m 3 /h 60 x 25 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Highlights: Automatic speed adjustment with temperature sensor Weight: 66 g Series 600 N VARIOFAN 30 C 55 C 30 C 55 C 30 C 55 C 30 C 55 C 30 C 55 C 612 NGMI 612 NMI 612 NGNI 612 NNI 612 NGNV / / ƒ / ƒ / ƒ / Air performance measured according to: ISO Installation category A, without contact protection. Noise: Total sound power level L W A ISO measured on half-sphere of 2 m; L p A measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see general conditions V types I types The temperature sensor for controlling the motor speed is not included in the scope of delivery. For the temperature sensor LZ 370, see accessories. The temperature sensor (NTC resistor) for controlling the motor speed is positioned in the fan hub directly in the air flow. 40

17 Max. 82 m 3 /h 60 x 32 mm Information Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 24, Weight: 100 g Series 600 J 612 JH / JH / JH / Fan types with streamer and integrated guard grille. 614 J/2 HHP / J/2 HHP / L p A measured at 1 m distance from fan axis. Rear view of types 614 J/2HHP and 618 J/2HHP 41 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

18 Max. 44 m 3 /h 70 x 15 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24 to AWG 28, Weight: 53 g Series 700 F 712 F/2L-005* / F/2M-006* / F / F / *Version with 3-pin Molex plug housing Molex Contacts L p A measured at 1 m distance from fan axis. 42

19 Max. 117 m 3 /h 80 x 25 mm Information Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Highlights: Very low-noise motor Weight: 105 g Series GL / GM / GN / Models with 25 khz PWM control and speed signal to 4-wire specification (see page 179). 8452/2 GHP / /2 GHHP / ƒ Models with 1-30 khz PWM control and speed signal. 8452/2 H4P / /2 H4P / L p A measured at 1 m distance from fan axis. 43 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

20 Max. 79 m 3 /h 80 x 25 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Highlights: Some models are suitable for use at high ambient temperatures up to 85 C. Weight: 95 g - Degree of protection: IP 54 / IP 68 Series 8400 N 8412 NGLE / NLE / NGMLE / NMLE / NGME / NME / NG / N / NH / ƒ 8412 NH / ƒ 8414 NGL / NL / NGML / NML / NGM / NM / NG / N / NH / ƒ 8414 NH / ƒ 8418 N / L p A measured at 1 m distance from fan axis. 44

21 Max. 58 m 3 /h 80 x 25 mm Information Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Highlights: Automatic speed adjustment with temperature sensor Weight: 95 g 30 C 50 C 30 C 50 C 30 C 50 C Series 8400 N VARIOFAN 8412 NGLV 8412 NGMLV 8412 NGMI < 10 < / < / < ƒ / measured on half-sphere of 2 m; L p A measured at 1 m distance from fan axis. In the event of deviation from the standard configuration, V types The temperature sensor for controlling the motor speed is not included in the scope of delivery. For the temperature sensor LZ 370, see accessories. I types The temperature sensor (NTC resistor) for controlling the motor speed is positioned in the fan hub directly in the air flow. 45 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

22 Max. 80 m 3 /h 80 x 32 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Weight: 170 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series L / M / / HL / H / ƒ 8314 L / M / / HL / H / ƒ / HL / H / ƒ Rotor protrusion max. 0.4 mm. L p A measured at 1 m distance from fan axis. 46

23 Max. 222 m 3 /h 80 x 38 mm Information Series 8200 J Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24 (H3 and H4: AWG 22), Weight: 160 g (H3 and H4: 200 g) L p A measured at 1 m distance from fan axis. - Degree of protection:ip JN / JH * / JH * / JN / JH * / JH * / JN / JH * / JH * / JH3 and JH4 also available as standard with PWM control input and speed signal. Speed control range from 2000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. 47 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

24 Max. 102 m 3 /h 92 x 25 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Weight: 100 g - Degree of protection: IP 54 / IP 68 Series 3400 N 3412 NGLE / NLE / NGME / NME / NG / N / NGH / NH / NGHH / ƒ 3412 NHH / ƒ 3412 NHH / ƒ 3414 NGL / NL / NGM / NM / NG / N / NGH / NH / NGHH / ƒ 3414 NGHH / ƒ 3414 NHH / ƒ 3414 NHH / ƒ 3418 N / Other 48 VDC models on request. L p A measured at 1 m distance from fan axis. 48

25 Max. 84 m 3 /h 92 x 25 mm Information Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Highlights: Automatic speed adjustment with temperature sensor Weight: 100 g 30 C 50 C 30 C 50 C Series 3400 N VARIOFAN 3412 NGMV 3412 NGV / / L p A measured at 1 m distance from fan axis. The temperature sensor for controlling the motor speed is not included in the scope of delivery. For the temperature sensor LZ 370, see accessories. 49 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

26 Max. 133 m 3 /h 92 x 32 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 24 UL 1061, Weight: 190 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series 3300 N 3312 NL / NM / NN / NH / NHH / ƒ 3312 NH / NN / NH / NHH / ƒ 3314 NH / NN / NH / NH / L p A measured at 1 m distance from fan axis. Ø 100,1 ± 0,3 50

27 Max. 280 m 3 /h 92 x 38 mm Information Series 3200 J L p A measured at 1 m distance from fan axis. - Degree of protection: IP 54 / IP JN / JH / JH * / JH * / JN / JH / JH * / JH * / JN / JH / JH * / JH * / Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 24 (H3 and H4: AWG 22), Weight: 240 g (H3 and H4: 280 g) * 3200 JH3 and JH4 also available as standard with PWM control input and speed signal. Speed control range from 2000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. 51 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

28 Max. 270 m 3 /h 92 x 38 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Weight: 240 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series 3250 J * 3252 J/2 H3P / J/2 H3P / J/2 HP** / J/2 HHP / J/2 H3P / ** On request * at free air flow. These values can be significantly higher in the operating point cfm L p A measured at 1 m distance from fan axis. the parametersmust be checked after installation! 52

29 Max. 170 m 3 /h 119 x 25 mm Information Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Highlights: and sleeve bearings available Weight: 175 g Series 4400 F 4412 FGL / FGML / FML / FGM / FM / FG / F / FL / FM / FG / F / FG / F / L p A measured at 1 m distance from fan axis. Available as an option: Fan housing with molded-in spacers 53 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

30 Max. 170 m 3 /h Ø 127 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 24, Highlights: and sleeve bearings available Optional: - Reversible direction of rotation - Symmetrical impeller Weight: 170 g - Reversible direction of rotation - Symmetrical impeller Series 4400 F NEW NEW NEW NEW 4412 FGL / FGML* / FGM* / FG* / * On request Other voltage versions (24 VDC, 48 VDC), speed variations and ball bearing designs are available as additional variants. n P ed Lw A rpm -1 W db(a) n P ed Lw A rpm -1 W db(a) ,05 0,1 0,15 0, cfm L p A measured at 1 m distance from fan axis. the parametersmust be checked after installation! Ø127 ± 0,5 54

31 Max. 225 m 3 /h 119 x 25 mm Information Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 22, Weight: 240 g Series 4400 FN 4412 FNH / FNN / FNH / FNH / L p A measured at 1 m distance from fan axis. 55 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

32 Max. 204 m 3 /h 119 x 32 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Highlights: and sleeve bearings available Weight: 220 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series GL / L / GM / M / G / / / ƒ 4314 L / M / G / / / / ƒ 4318 M / / Rotor protrusion max. 0.4 mm. L p A measured at 1 m distance from fan axis. 56

33 Max. 170 m 3 /h 119 x 32 mm Information Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 22, Highlights: Speed automatically adjusted to cooling requirement Weight: 220 g 25 C 50 C 25 C 50 C 30 C 50 C Series 4300 VARIOFAN 4312 MT 4312 T 4314 T / / / L p A measured at 1 m distance from fan axis. The temperature sensor for controlling the motor speed is not included in the scope of delivery. For the temperature sensor LZ 370, see accessories. Rotor protrusion max. 0.4 mm. 57 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

34 Max. 205 m 3 /h 119 x 38 mm Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 24, Weight: 270 g - Degree of protection: IP 54 Series L / ML / M / ƒ 4412 N / L / LL / L / ML / M / ƒ 4414 N / L / ML / M / ƒ 4418 N / Further variants can be found on page 59. L p A measured at 1 m distance from fan axis. 58

35 Max. 285 m 3 /h 119 x 38 mm Information Series 4400 Material: Housing: GRP 1) (PBT) Direction of rotation: Clockwise, Connection: Via single wires AWG 24, Weight: 270 g L p A measured at 1 m distance from fan axis. - Degree of protection: IP H / /2 HHP / H / HH / /2 HHP / H / /2 HHP / Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

36 Max. 237 m 3 /h 119 x 38 mm Material: Housing: Die-cast aluminum Direction of air flow: Intake over struts Direction of rotation:clockwise, Connection: On flat connectors, 2.8 x 0.5 mm Also available with wires as an option Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 390 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series 4100 N 4182 NGX / NX / NXH / NGX / NXM / NX / NXH / NGX / NXM / L p A measured at 1 m distance from fan axis. 60 Cables P. 255

37 Max. 440 m 3 /h 119 x 38 mm Information Series 4100 N High Performance Material: Housing: Die-cast aluminum Direction of air flow: Intake over struts Direction of rotation: Clockwise, Connection: Via single wires AWG 22 UL 1007, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 390 g L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection:ip 54 / IP NHH / NH / NH / NHH / NH / NH / NH * / NH * / ƒ 4118 NHH / NH / NH / NH * / NH * / ƒ * at free air flow. These values can be significantly higher in the operating point. * * in operation Fan type optimum operating range (W) 4114 NH NH NH NH Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

38 Max. 570 m 3 /h 119 x 38 mm Material: Housing: Die-cast aluminum Direction of air flow: Intake over struts Direction of rotation: Clockwise, looking towards rotor Connection: Via single wires AWG 18, 20 or AWG 22,, speed signal and control input AWG 22 Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lug for screw M4 x 8 (Torx) Weight: 425 g (standard) - Salt spray protection Series 4100 N High Performance ** 4114 N/2 H7P / N/2 H8P / N/2 H7P * / N/2 H8P * / * VDC on request. Speed control range from 500 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. To attain the specified service life, an external capacitor must be wired between the plus and minus strands. Please note the wiring suggestion on page 16. ** at free air flow, these values can be significantly higher in the operating point. ** - in operation Fan type optimum operating range (W) 4114 NH7P NH8P NH7P NH8P 160 L p A measured at 1 m distance from fan axis. 62

39 Max. 280 m 3 /h DC diagonal fan 119 x 38 mm Information Series DV 4100 Material: Housing: GRP 1) (PBT) Available in die-cast aluminum Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 375 g (with metal housing: 455 g) L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection: IP 54 / IP 68 DV 4112 N / DV 4114 N / DV 4118 N / * at free air flow. These values can be significantly higher in the operating point. * 63 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

40 Max. 340 m 3 /h 127 x 38 mm Material: Housing: GRP 1) (PBT) Connection: Via single wires AWG 22, Weight: 310 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series 5200 N ** 5212 NM / NN / NH / NHH* / NM / NN / NH / NHH* / NM / NN / NH / NHH* / ** at free air flow, these values can be significantly higher in the operating point. *NHH models: fan housing with molded-in spacers. L p A measured at 1 m distance from fan axi. the parametersmust be checked after installation! 64

41 Max. 320 m 3 /h DC diagonal fan 127 x 38 mm Information Series DV 5200 Material: Housing: GRP 1) (PBT) Available in Die-cast aluminum Metal flange Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 415 g (with metal housing: 490 g) L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection: IP 54 DV 5212 N / DV 5214 N / DV 5218 N / Standard model comes with speed signal and PWM control input. Other versions by request. DV 5214/2 HP / Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. * 65 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

42 Max. 260 m 3 /h 135 x 38 mm Material: Housing: Die-cast aluminum Impeller: painted sheet steel Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) 48 V design incl. screws. Weight: 650 g - Salt spray protection - Degree of protection: IP 54 Series 5100 N * 5112 N / N / N / * at free air flow. These values can be significantly higher in the operating point. L p A measured at 1 m distance from fan axis. 66

43 Max. 340 m 3 /h 140 x 51 mm Information Series 5300 Material: Housing: Die-cast aluminum Direction of air flow: Intake over struts Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 900 g L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection: IP /2 HP / /2 HP / Speed control range from 700 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. * 67 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

44 Max. 670 m 3 /h 140 x 51 mm Material: Housing: Die-cast aluminum Direction of air flow: Intake over struts Connection: Via single wires AWG 20 and AWG 22, Highlights: 3-phase fan drive with very smooth operation Housing with grounding lug for screw M4 x 8 (Torx) Weight: 900 g - Multi-option control input - Salt spray protection - Degree of protection: IP 54 Series 5300 TD * 5312/2 TDHP / /2 TDHP / /2 TDHHP / /2 TDHP / /2 TDHHP / /2 TDH4P / Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. L p A measured at 1 m distance from fan axis. 68

45 Max. 360 m 3 /h Ø 150 x 38 mm Information Series 7100 N Material: Housing: Die-cast aluminum Impeller: painted sheet steel Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 620 g L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection:ip 54 / IP N / N / NH / N / * at free air flow. These values can be significantly higher in the operating point. * Wire fastened with cable tie. Strand fastened using cable tie; cable tie protrudes 1 mm. 69 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

46 Max. 360 m 3 /h Ø 150 x 55 mm Material: Housing: Die-cast aluminum Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 725 g - Salt spray protection - Degree of protection: IP 54 / IP 68 Series 7200 N * 7212 N / N / N / * at free air flow. These values can be significantly higher in the operating point. L p A measured at 1 m distance from fan axis. 70

47 Max. 480 m 3 /h 172 x 150 x 51 mm Information Series 6400 L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection: IP M / M / / H ** / / H* ** / Material: Housing: Die-cast aluminum Connection: on flat plugs 3 x 0.5 mm Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 760 g * Strand 310 mm. ** 72 C versions on request *** at free air flow, these values can be significantly higher in the operating point. Cables P. 255 *** 7.5 deep 71 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

48 (7.5 deep) Max. 900 m 3 /h 172 x 150 x 51 mm Material: Housing: Die-cast aluminum Connection: Via single wires AWG 18, 20 or AWG 22,, speed signal and control input AWG 22 Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lug for screw M4 x 8 (Torx) Weight: 760 g - Salt spray protection - Degree of protection: IP 54 - Reversible direction of rotation Series 6400 TD ** Min Max Min Max Min Max 6424 TD TD TDHH / * / / * Variants with an extended voltage range available on request. Models 6424 TD..., 6448 TD... and 6448 TDHH... are available in customer-specific, custom-developed variants only. The figures indicated are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 165. ** at free air flow, these values can be significantly higher in the operating point. L p A measured at 1 m distance from fan axis. 72

49 Max. 530 m 3 /h DC diagonal fan 172 x 160 x 51 mm Information Series DV 6400 DV / DV / L p A measured at 1 m distance from fan axis. - Salt spray protection - Degree of protection: IP 54 Material: Housing: Die-cast aluminum Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 820 g (7.5 deep) 73 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

50 Max. 680 m 3 /h DC diagonal fan 172 x 160 x 51 mm Material: Housing: Die-cast aluminum Connection: Via single wires AWG 22, Highlights: 3-phase fan drive with very smooth operation and high efficiency. Housing with grounding lug for screw M4 x 8 (Torx) Weight: 820 g - Salt spray protection - Degree of protection: IP 54 - Reversible direction of rotation Series DV 6400 TD TURBOFAN * Min Max Min Max DV 6424 TD / DV 6424 TD... DV 6448 TD / / Models DV 6424 TD... and DV 6448 TD... are available in customer-specific, custom-developed variants only. The figures indicated are technically feasible benchmark values. The fans can be specially adapted to your application with signal outputs and control inputs. For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 165. * at free air flow. These values can be significantly higher in the operating point. L p A measured at 1 m distance from fan axis. (7.5 deep) 74

51 Max. 930 m 3 /h 172 x 160 x 51 mm Information Series 6300 TD 6314/2 TDHHP / /2 TDH4P / Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. Material: Housing: Die-cast aluminum Connection: Via single wires AWG 18, 20 or AWG 22,, speed signal and control input AWG 22 Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lug for screw M4 x 8 (Torx) Weight: 910 g * L p A measured at 1 m distance from fan axis. 7.6 deep (standard) - Multi-option control input - Salt spray protection - Degree of protection: IP Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

52 Max. 685 m 3 /h Ø 172 x 51 mm Material: Housing: Die-cast aluminum Connection: (+) and GND AWG 20, UL 1007, ; speed signal and alarm signal: AWG 22, UL 1007, Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lug for screw M4 x 8 (Torx) Weight: 850 g (standard) - Multi-option control input - Salt spray protection - Degree of protection: IP 54 / IP 68 Series 6300 N 6314 N/2 HHP / N/2 H3P / Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. L p A measured at 1 m distance from fan axis. Ø ,15-0,3 Ø

53 Max m 3 /h Ø 172 x 51 mm Information Series 6300 NTD 6314 N/2 TDHHP ,500 / 32, , N/2 TDH3P ,000 / 30, ,500 Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. Material: Housing: Die-cast aluminum Connection: AWG 18, 20 UL 1007,, speed and alarm signals: AWG 22, UL 1007, Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lugfor screw M4 x 8 (Torx) Weight: 850 g * L p A measured at 1 m distance from fan axis. (standard) - Multi-option control input - Salt spray protection - Degree of protection: IP 54 Ø ,15-0,3 Ø Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

54 Max. 545 m 3 /h Ø 172 x 51 mm Material: Housing: Die-cast aluminum Direction of rotation:counterclockwise, Connection: Via single wires AWG 22, Highlights: Housing with grounding lug for screw M4 x 8 (Torx) Weight: 825 g (standard) - Salt spray protection - Degree of protection: IP 54 Series 6300 * 6314/2 MP / /2 NP / /2 HP / /2 HP / Speed control range from 700 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. Noise: Total sound power level LwA ISO LpA measured at 1 m distance from fan axis. 7.6 deep 78

55 Max. 930 m 3 /h Ø 172 x 51 mm Information Series 6300 TD Material: Housing: Die-cast aluminum Connection: Via single wires AWG 18, 20 or AWG 22,, speed signal and control input AWG 22 Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lug for screw M4 x 8 (Torx) Weight: 910 g Noise: Total sound power level LwA ISO LpA measured at 1 m distance from fan axis. (standard) - Multi-option control input - Salt spray protection - Degree of protection: IP /2 TDHP / /2 TDHP / /2 TDHP / /2 TDHHP / /2 TDH4P / ƒ 6318/2 TDHP / /2 TDHP / /2 TDHHP / /2 TDH4P / Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. * at free air flow. These values can be significantly higher in the operating point. * * in operation Fan type optimum operating range (W) 6318/2 TDHHP /2 TDH4P deep 79 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

56 Max m 3 /h DC diagonal fan Ø 172 x 51 mm Material: Housing: Die-cast aluminum Connection: (+) and GND: AWG 18, UL 1007, ; speed and alarm signal: AWG 22, UL 1007, Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lugfor screw M4 x 8 (Torx) Weight: 1050 g (standard) - Multi-option control input - Salt spray protection - Degree of protection: IP 54 Series DV 6300 TD DV 6318/2 TDHP* / DV 6318/2 TDHHP* / DV 6318/2 TDH4P / DV 6318/2 TDH5P** / * On request ** Rotor protrusion a = 3 mm Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted. The fan has an acceleration of up to 30% that produces a smoother curve. n P ed Lw A L 10 (40 C) L 10 (65 C) L 10IPC (40 C) rpm -1 W db(a) , , , n P ed Lw A L 10 (40 C) L 10 (65 C) L 10IPC (40 C) rpm -1 W db(a) , , L p A measured at 1 m distance from fan axis. 9.0 deep 80

57 Max m 3 /h 220 x 200 x 51 mm Information Series 2200 FTD L p A measured at 1 m distance from fan axis. - Multi-option control input - Salt spray protection - Degree of protection: IP F/2 TDHO / F/2 TDHHO / F/2 TDHO / F/2 TDHHO / F/2 TDH4P / Material: Housing: Die-cast aluminum Connection: Via single wires AWG 18, 20 or AWG 22,, speed signal and control input AWG 22 Highlights: Highly efficient and smoothly operating 3-phase fan drive Housing with grounding lug for screw M4 x 8 (Torx) Weight: 1000 g Speed control range from 1000 rpm -1 up to maximum nominal speed. Standstill at 0% PWM, Type O: standstill if control wire is interrupted; Type P: maximum speed if control wire is interrupted. * at free air flow. These values can be significantly higher in the operating point. * 7.6 deep 81 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

58 Max m 3 /h DC diagonal module 225 x 80 mm Material: Housing and support bracket: Fiberglass-reinforced plastic (PA6) Impeller: Fiberglass-reinforced plastic (PA6) Rotor: Painted black Number of blades: 7 Direction of air flow: "V" Direction of rotation: Clockwise, Degree of protection: A C IP 44, B D IP 20, depending on installation and position Insulation class: "B" Installation position: Any Condensation drainage holes: A C none, B D seen on rotor Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings range Input current Admissible amb. temp. Weight Technical features and connection diagram Type Motor VDC VDC m 3 /h rpm -1 W A db(a) C kg K1G 200-AD65-04 M1G 074-BF A p. 262 / J5) K1G 200-AD31-02 M1G 074-BF B K1G 200-AD49-04 M1G 074-BF C K1G 200-AD37-02 M1G 074-BF D p. 262 / J5) p. 262 / J5) p. 262 / J5) s: P fs Pa in wg B A C D cfm A A A A B B B B C C C C D D D D n rpm P ed W I A L W A db(a) q v m³/h Suction-side noise levels: LWA according to ISO 13347, LpA measured at 1 m distance from fan axis. 82

59 Information DC centrifugal fans DC fans - specials ACmaxx / EC fans Ø276 ± Ø4.6 (4x) 80 ±1 AC axial fans Ø x90 AC centrifugal fans Ø ±1 Accessories 85 6 "V" Cable assignment: Red = UN Yellow = 0-10 VDC White = tach output Blue = GND Connection diagrams P Representatives AWG 20 cable, 4x crimped splices See connection diagram p. 262 Immunity to interference according to EN (industrial environment) Interference emission according to EN (Class B) Cable exit: Lateral Protection class: I (with customer connection to grounding conductor) Conformity with standard(s): EN A C UL , CSA C22.2 no. 77 Approvals B D EAC, UL , CSA C22.2 no. 77 Technical features: EMC:

60 Max m 3 /h DC diagonal module 225 x 89 mm Material: Housing and support bracket: Plastic (PA) Impeller: Plastic (PA) Rotor: Painted black Number of blades: 7 Direction of air flow: "V" Direction of rotation: Clockwise, Degree of protection: A C IP 44, B D IP 20, depending on installation and position Insulation class: "B" Installation position: Any Condensation drainage holes: A C none, B D seen on rotor Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings range Input current Admissible amb. temp. Weight Technical features and connection diagram Type Motor VDC VDC m 3 /h rpm -1 W A db(a) C kg K3G 200-BD46-04 M3G 074-CF A p. 262 / J5) K3G 200-BD44-02 M3G 074-CF B K3G 200-BD64-04 M3G 074-CF C K3G 200-BDA8-02 M3G 074-CF D p. 262 / J5) p. 262 / J5) p. 262 / J5) s: P fs Pa in wg A B D C cfm A A A A B B B B C C C C D D D D n rpm P ed W I A 7.00* 7.52* 7.80* 7.78* 11.50* 12.24* 12.48* 12.30* 5.80* 6.27* 6.41* 6.35* 8.40* 8.89* 9.17* 9.01* L W A db(a) * Current measured at nominal voltage. q v m³/h Suction-side noise levels: LWA according to ISO 13347, LpA measured at 1 m distance from fan axis. 84

61 Technical features: See connection diagram p. 262 EMC (48 V): Immunity to interference according to EN (industrial environment) Interference emission according to EN (Class B, household environment) Cable exit: Lateral Conformity with standard(s): EN Approvals: (24 V) EAC (48 V) EAC, CCC Ø276 ±0.5 Cable assignment: Red = UN Yellow = 0-10 VDC White = tach output Blue = GND 225 ±0.5 Ø4.6 ±0.2 (4x) Connection diagrams P Information ± ±1 6 "V" Ø276 PVC AWG 16 cable 4x crimped ferrules ± ±0.5 Mounting dimensions Ø269 ± Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

62 Max m 3 /h Ø 250 mm Material: Fan housing: Die-cast aluminum Blades: Plastic (PP) Rotor: Thick-film passivated Number of blades: 7 Direction of air flow: "V" Insulation class: "B" Installation position: Any Condensation drainage holes: On rotor side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings range Input current Max. back-pressure Admissible amb. temp. Technical features and connection diagram Type Motor VDC VDC m 3 /h rpm -1 W A Pa C W1G250-HJ87-02 M1G 074-BF A p. 258 / E) W1G250-HJ63-02 M1G 074-BF B p. 258 / E) s: p fs Pa in H 2O B 160 A 0,6 0,1 0,2 0,3 0,4 0,5 q V cfm m 3 /h 3 2 A A A A B B B B n rpm P ed W I A L W A db(a) Suction-side noise levels: LWA according to ISO 13347, L p A measured at 1 m distance from fan axis. 86

63 Information Technical features: See connection diagram p. 258 EMC: Interference emission acc. to EN (Class B) Immunity to interference acc. to EN (industrial environment) Electrical hookup: Via terminal strip Protection class: I Conformity with standard(s): EN from p. 245 For self-tapping M6 screws Connection diagrams P. 258 For self-tapping M5 screws "V" (1) Control input (2) Speed monitoring 87 Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

64 Max m 3 /h HyBlade Ø 300 mm Material: Finger guard: Steel, phosphated and coated in black plastic Fan housing: Sheet steel, pre-galvanized and coated in black plastic Blades: Plastic (PP) Rotor: Painted black Number of blades: 5 Direction of air flow: "V" Degree of protection: IP 42 Insulation class: "B" Installation position: Any Condensation drainage holes: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings range Input current Max. back-pressure Admissible amb. temp. Technical features and connection diagram Type Motor VDC VDC m 3 /h rpm -1 W A Pa C *1G 300 M1G 074-CF A p. 262 / J5) *1G 300 M1G 074-CF B p. 262 / J5) s: p fs Pa ,1 0,2 0,3 0,4 in H 2O 0 q V A B cfm m 3 /h A A A A B B B B n rpm P ed W I A L W A db(a) Air performance measured according to: ISO 5801, installation category A, in ebm-papst full nozzle without contact protection. Suction-side noise levels: LWA according to ISO 13347, L p A measured at 1 m distance from fan axis. 88

65 Information Technical features: See connection diagram p. 262 EMC: Interference emission acc. to EN (Class B) Immunity to interference acc. to EN (industrial environment) Cable exit: Lateral Conformity with standard(s): EN , UL , CSA C22.2 no. 100 Approvals: GOST, UL Airflow direction "V" "V" "V" without attachments Ø326 Ø397 Weight without attachments kg With full round nozzle Ø380 Ø9 (6x) "V" "V" kg 15 Ø92 60 (6x) ±5 "V" 57.5 ±1 With finger guard for short nozzle A1G 300-AC W1G 300-DC S1G 300-AC19-54 A1G 300-AC W1G 300-DC S1G 300-AC33-54 ±3 Ø A1G M4 (4x) Ø58 ±0.15 ± kg Max. clearance for screw 6 mm PVC AWG 20 cable, 4x crimped splices Ø300 Ø329.6 Ø ±5 W1G 300 S1G 300 Connection diagrams P. 262 Weight with full round nozzle Weight with finger guard for short nozzle ±1 25 ± Representatives Accessories AC centrifugal fans AC axial fans ACmaxx / EC fans DC fans - specials DC centrifugal fans

66 90