AC and DC Axial Fans Part Numbering Guide

Transcription

1

2 and D xial Fans ing uide xample: for D Fan FD1 025BMW11 FD B M W SRIS FD: D Fans F: Fans up to mm FK: Fans mm and above FN TYP 1: xial 3: hip ooler 2: xial apacitor Motor 4: Blower Fan FN SIZ (mm) FRM THIKNSS (mm) VOLT : 3.3 VD F: VD B: 5 VD N: 115 V : 12 VD Q: 230 V D: VD R: 115/230 V : 48 VD BRIN : 1 Ball 1 Sleeve : eramic S: Sleeve B: 2 Ball H: Hydro Dynamic SPD : Ultra low H: High T: Top High L: Low J: Ultra High M: Medium K: Super High TRMINTION W: PV Wire T: Terminal FRM & IMPLLR MTRIL 1: Plastic/Plastic 3: Metal/Plastic 2: Plastic/Metal 4: Metal/Metal FUNTION 1: By Impedance 5: By I with Variable Speed Sensor (VS) 9: PWM ontrol D: IP55 2: By I : By Transistor with Speed Sensor (F) : VS+RD : IP7 3: By I with larm (RD) 7: Two Speed B: PWM+F F: By Thermal 4: By I with Speed Sensor (F) 8: VS+F : RD+F SPIL FTUR 1

3 and D xial Fans Qualtek lectronics offers a complete line of low cost & D axial fans produced in high tech facilities assuring high quality standards with large production capabilities. Qualtek s and D fans are offered in a large variety of bearing types: 2Ball, 1Ball 1Sleeve, Sleeve, and Hydro Dynamic with a wide range of speeds. fans are available from 115 to 230V and sizes from mm to 2mm, D fans are available from 3.3VD and sizes from 20mm to 254mm with a large array of functions and special features. Fan Specifications Series Dimensions (mm) Dimensions (in) ir Flow (FM) Voltage (V) Noise Level (db/) F1025 x x 25 3 x F1038 x x 38 3 x F1025 x x 25 x F125 x x x F138 x x x FK x x 51.7 x 5.9 x FK x x 51.7 x 5.9 x FK x 17 x x FK215 1 x 1 x x FK x 205 x x FK x 89 (round) x FK x 2 x x FK x 2 x x pprovals D Fan Specifications Series Dimensions (mm) Dimensions (in) ir Flow (FM) Voltage (VD) Noise Level (db/) FD x 25 x x , FD x 30 x 10 1 x , FD1010 x x 10 x , 12, FD1020 x x 20 x , 12, FD1010 x x x , 12, FD1020 x x 20 x , 12, FD1025 x x 25 x , 12, FD1015 x x 15 3 x , 12, FD1025 x x 25 3 x , FD1025 I x x 25 3 x , FD1032 x x 32 3 x ,, FD1038 x x 38 3 x , FD1025 x x 25 x , FD1025 I x x 25 x ,, FD125 x x x ,, FD132 x x x ,, FD138 x x x ,, FD x 127 x 38 0 x ,, pprovals 2

4 luminum Fan Filters 0 Series These tested and proven filters provide maximum airflow with effective filtering. Mill and stainless steel finishes are offered to enhance MI/RFI shielding as well as an anodized finish for aesthetic purposes. The tightly woven corrugated mesh screen is encased in a formed aluminum frame built for ruggedness and durability. The filters are designed to fit any standard mm, mm, mm and mm tubeaxial fan. The units are easily washed in a solvent or degreaser and can be mounted directly to the fan or to a panel. mm Use With Fan Size mm in. Finish Height (sq.) Size (in) Thickness Mounting Hole Diameter Mounting Hole enter mm mm 02B 02M 02SS nodized (Black) Mill (No Finish) Stainless Steel mm 0325B 0325M 0325SS nodized (Black) Mill (No Finish) Stainless Steel mm mm 02B 02M 02SS nodized (Black) Mill (No Finish) Stainless Steel mm mm 04B 04M 04SS nodized (Black) Mill (No Finish) Stainless Steel Fan Power ords 07 Series FanS offers four configurations of high quality fan power cords designed to be used with tubeaxial fans with a strain relief for added safety. UL and cul rated 10 mps/125 Volt with special configurations such as daisy chain, special length and color are available. ord Length mm in. Style Figure ordage B SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) 07100SP SP SP B B B SPT1(18/2) SPT1(18/2) SPT1(18/2) D SP SP SP D D D SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) F 07190SP SP SP F F F SPT1(18/2) SPT1(18/2) SPT1(18/2) TType TType TType TType TType TType TType SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) SPT1(18/2) H 07199SP SP SP TType TType TType H H H SPT1(18/2) SPT1(18/2) SPT1(18/2) 3

5 Wire Form Fan uards 08 Series ll wire form fan guards are produced in our ISO 9001 certified facility to assure compliance to our rigid specifications. vailable for fan sizes 25mm to 254mm with a high quality nickel chrome finish as our standard. lso available in black finish & stainless steel. 085 (25mm) 0834 (30mm) (mm) (mm) (mm) (mm) (mm) (mm) 0815 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 0814 (mm) (mm) (mm) (127mm) 08 (127mm) (mm) 0812(mm) (mm) (mm) (17mm) (254mm) (254mm) 083SS (254mm) * ** ** SS For Use With Fan Size Rib Material Dia. Ring Material Dia. Mounting Hole enters * Note: dd to part number for: Black (02), Stainless Steel (SS) (example: Black mm Fan uard.) ** Does not meet 1/4 max. ring spacing. Outside Ring Dia. Thickness mm in. mm in. mm in. mm in. mm in. mm in / / /

6 Plastic Fan uards 09 Series The 09 Series low cost plastic fan guards produced with UL 94V0 material are designed for tubeaxial fans with design considerations given to maximize airflow with reduced noise levels. Space saving models (Thin) designed for & mm. 00 (mm) 0 (mm) 052 (mm) 090 (mm) Thin (mm) (mm) 092 (mm) 093 (mm) 09 (mm) (mm) (mm) Thin (mm) 094 (mm) 09 (mm) 0951 (mm) For Use With Fan Size Mounting Hole enters Mounting Hole Dia. 4 Places Width Thickness mm in. mm in. mm in. mm in. mm in. 1 1/ Fan Silencer and ccessories Noise is the number one problem for axial fans that are used for electronic cooling. It is generally caused by vibration between the housing and fan. To prevent this problem, we have developed a method that eliminates noise and makes mounting effortless. With the patented rubber elastic sleeves, you can fasten axial fans without screws quickly and safely with four mushroom formed pegs on a mounting plate or housing wall. QLM2010 QLM3010 QLM10 QLM10 QLM11910 QLM Fan Vibration Sleeve B Panel Thickness Inch mm Inch mm Inch mm Inch mm MI Filter Shield for QLM Sleeves QSB01 QSB01 QSB01 QSB01 QSB11901 Filter Media for QLM Sleeves QF01 QF01 QF01 QF01 QF11901 B F Inch mm Inch mm Inch mm B D Inch mm Inch mm Inch mm Plastic Fan uards for QLM Sleeves QS02 QS02 QS02 QS02 QS11902 QLN31100 B Inch mm Inch mm Inch mm Rivets With the specially designed rivets, metal fan guard grills can be attached into the holes of the mushroom formed pegs from the fan sleeves. 5

7 FanS offers a unique fan filter package consisting of a guard, foam filter media and media retainer for the removal of dust and contaminating particles with quick and simple installation. Fig. Plastic Fan Filter ssemblies 09 Series mm 1. Fig. Description Mounting Hole enters Mounting Hole Diameter 4 Places Width 4 Places Thickness mm in. mm in. mm in. mm in. Retainer Foam Media 00F/30 00F/45 00F/ 00F/100 00M/30* 00M/45* 00M/* 00M/100* 00 00R mm 2. Fig. uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only uard 0F/30 0F/45 0F/ 0F/100 0M/30* 0M/45* 0M/* 0M/100* 0 0R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only Fig. B uard mm 3.13 Fig. B 09325F/ F/ F/ 09325F/ M/30* 09325M/45* 09325M/* 09325M/100* R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only mm Fig. B Foam Media Retainer 092F/30 092F/45 092F/ 092F/ M/30* 092M/45* 092M/* 092M/100* R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only mm 4. Fig. B Fig. 094F/30 094F/45 094F/ 094F/ M/30* 094M/45* 094M/* 094M/100* R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only Retainer Foam Media uard mm.00 Fig. 09F/30 09F/45 09F/ 09F/100 09M/30* 09M/45* 09M/* 09M/100* 09 09R uard, Retainer, Media (30 PPI)** uard, Retainer, Media (45 PPI)** uard, Retainer, Media ( PPI)** uard, Retainer, Media (100 PPI)** Foam Media ( PPI)** uard Only (2) 0(2) 0(2) 0(2) 0(2) * ach package contains 5 pieces ** Pores per Inch (PPI)

8 Receptacles Primary Power omponents Division complete line of inlets, outlets, multifunction modules, circuit breakers, voltage selector switches and switches have the major international approval marks thus assuring high safety standards. Our Power omponents help customers comply with international regulations. Modern production methods enable us to manufacture costeffective and reliable components. full range of products are maintained in inventory for quick ontime deliveries. ustom designs are available upon request. able ssemblies Wire, able & Interconnect Division Product Profile Offering a complete range of new designs and configurations to its extensive line of cable assembly products. Products include dapters, Flat Ribbon able, I ables, DVI, HDMI, USB, Monitor ables, OM ables and Networking ables. MI Power Line Filters Primary Power omponents Division MI/RFI power line filters are designed to meet most international safety agency requirements. These filters help customers meet F and VD emission standards. Our line consists of many standard configurations such as block type, filter with power line connector, and various filters with multifunctional modules. ustom designs are available upon request. & D Fans FanS Division Qualtek lectronics offers a complete line of low cost & D axial fans produced in high tech facilities assuring high quality standards with large production capabilities. Qualtek s and D fans are offered in a large variety of bearing types: 2Ball, 1Ball 1Sleeve, Sleeve, and Hydro Dynamic with a wide range of speeds. fans are available from 115 to 230V and sizes from mm to 2mm, D fans from are available from 3.3VD and sizes from 20mm to 254mm with a large array of functions and special features. Fan ccessories FanS Division complete line of accessories for tubeaxial fans consisting of wire form fan guards, plastic fan guards, plastic fan filter assemblies, aluminum fan filters and fan power cords with excellent quality and competitive prices. Our accessories are designed to comply with international safety agency regulations to insure a safe and durable product. ustom designs are available upon request. Heat Shrink Products Wire, able & Interconnect Division Heat shrinkable products include: Polyolefin, Silicon, Fiberglass, Teflon, Viton, Kynar, HalogenFree and high temp tubing. It is available in different sizes, colors and materials. Qualtek heat shrink tubing products are produced by crosslinking extruded polymer compounds which produces a shape memory effect and when heated, can be recovered into its original shape. Power ords & Wiring Devices Primary Power omponents Division large selection of 2 and 3 conductor power cords and cord sets for North merica, rgentina, ustralia, Brazil, hina, ontinental urope, Israel, Italy, Japan, Korea, South frica, Switzerland, Taiwan, and the United Kingdom. The power cords are designed to comply with international safety agency regulations to insure safe and durable products. We have one of the largest selections of male plugs and female connectors in the industry available in various insulations, voltage ratings, colors, lengths, plugs, connectors, and shielding plus a full line of hospital grade and internationally certified power cords. Special power cords and strain relief configurations are available upon request. We also offer a wide range of Nema straight blade and twistlocking wiring device configurations available in plugs, connectors and receptacles with amp ratings of 15, 20 & 30, Industrial grade devices for rugged applications are designed for easy installation and UL listed with the highest regards for safety. Power Supplies Primary Power omponents Division Qualtek offers a wide range of /D, D/D converters and LD power supplies. Qualtek power supplies are available in enclosed frame, open frame, L bracket, U bracket, external desktop, wall mounted, on board module and din rail. Our power supplies are offered in compact designs to comply with safety agency regulations and are available with power factor correction and multiple outputs. Thermal ircuit Breakers Primary Power omponents Division diverse range of thermal circuit breakers. Qualtek s QLB and QMB series are compact and cost effective. The single pole, push to reset circuit breakers are designed to protect equipment. With a wide range of amp ratings from 3 amps. International Procurement Services International Procurement Services Division The Qualtek roup is a global network with offices in hina, Hong Kong, Mexico, Philippines, Taiwan and the US with the resources and expertise to provide a complete range of offshore services from component sourcing to complete turnkey projects. We have locations in major manufacturing regions in the world; thus enabling us to have immediate access to the benefits of the newest technology, highest quality products and most cost effective production methods. 7 Jenther Dr. * Mentor, Ohio 4 * US Telephone: * Fax: mail: mailbox@qualtekusa.com * Web: FNS 0100