F Series Terminators and Accesories

Transcription

1 F Series Terminators and ccesories Our "F" series terminators are passive electronic circuitry designed to block 60 cycle and terminate RF signals on unused equipment ports. They are necessary to prevent impedance mismatches and minimize RF reflections and echoes. Unused active ports on trunk or feeder equipment should have a terminator installed. We offer a wide variety of terminators and drop accessories for a range of applications. "F" Port Terminators Security Sleeves and Tools Theft Proof Terminators Female to Female Splice (F81) onding locks Right ngle dapters

2 75 Ω Terminators 75 Ω Terminator GTR [.7 mm] Dia. Pin 75 Ω Precision Terminator NS [.7 mm] Dia. Pin 75 Ω Power locking Terminator GTR-59-DC Incorporates a capacitor to block 60 Hz C Power.027 [.7 mm] Dia. Pin 40 Corning Gilbert roadband Products Tel: / Fax: /

3 Theft Proof Terminators.025 [.6 mm] Dia. Pin 75 Ω Theft Proof Swivel Terminator GTR-59-S Designed for use with Security Shields and Security Shield Tool DIMOND KNURL Security Shield Tool HNDLE 2.25 [57.2 mm] 7/16 [11.1 mm] HEX G-S [8.4 mm] Slot 2.75 [69.9 mm] C Security Shield Material () () (C) NS Steel For use with Terminator and Security Shield Tool Corning Gilbert roadband Products Tel: / Fax: /

4 Theft Proof Terminators Theft Proof Terminator 1.53 [38.73 mm] Description GTP-59 Resistor, Gasket GTP-59-LR No Resistor, Gasket NS Resistor, Gasket, Silicone Grease NS Resistor, Gasket, Ident. Groove NS No Resistor, Gasket, Silicone Grease Requires G-GTT-4 or G-GTT-7 tools for installation and removal Drop Connector Parking Port.31 [8.0 mm] Terminator Tool G-GTT G-GTT Theft Proof 1.42 [36.0 mm] Description GTR-59-TP Resistor, Gasket GTP-59-TP-SP No Resistor, Gasket Requires IT-59-TP-S or IT-59-TP-L tools for installation and removal Drop Connector Parking Port.30 [7.6 mm] 9/16 [14.3 mm] Hex Terminator Tool IT-59-TP-S 6.00 IT-59-TP-L Corning Gilbert roadband Products Tel: / Fax: /

5 Theft Proof Terminators Drop Connector Parking Port Theft Proof Terminator Description NS Resistor, No Gasket NS No Resistor, No Gasket NS Resistor, Gasket NS No Resistor, Gasket Requires NS or NS tools for installation and removal 7/8 [22.3 mm] Hex Terminator Tool NS [95 mm] NS Drop Connector Parking Port Theft Proof Description NS No Resistor, No Gasket NS Resistor, No Gasket Requires NS tool for installation and removal 15/16 [23.8 mm] Hex Terminator Tool NS [77 mm] Corning Gilbert roadband Products Tel: / Fax: /

6 Indoor onding locks onding lock bodies are made of high quality, extruded, corrosion resistant aluminum alloy. The F-81 connectors are machined brass with chromate conversion coating over cadmium plating and are installed in the extruded mounting bracket. ll models include grounding wire screw(s) and two (2) mounting screws. rticle of the National Electrical Code requires that: Where coaxial cable is exposed to lightning or to accidental contact with lightning arrester conductors or power conductors operating at a voltage of over 300 volts to ground, the outer conductive shield of the coaxial cable shall be grounded at the building premises as close to the point of cable entry as practicable. onding block numbers GG-4U, GG-4DU, GG-4TSU, and GG4D-TSU are designed to facilitate compliance with this requirement and are listed by Underwriters Laboratories, Inc. Indoor Single.15 [3.8 mm] 1.01 [25.7 mm].35 [8.9 mm] () ccepts GG GG-4U (UL Listed) [40.9 mm] 1.96 [49.8 mm].75 [19.1 mm] 1.01 [25.7 mm].35 [8.9 mm] Indoor Single () ccepts NS [50.8 mm] 2.37 [60.2 mm].86 [21.8 mm].15 [3.8 mm] 1.01 [25.7 mm].35 [8.9 mm] Indoor Double () ccepts GG-4D GG-4DU (UL Listed) [63.5 mm] 2.85 [72.4 mm].75 [19.1 mm] 44 Corning Gilbert roadband Products Tel: / Fax: /

7 Outdoor onding locks.15 [3.8 mm] 1.37 [34.8 mm].50 [12.7 mm] Nom. Outdoor Single 1.61 [40.9 mm] 1.96 [49.8 mm].75 [19.1 mm] () ccepts GG-4TS GG-4-TS-U (UL Listed) [3.8 mm] 1.37 [34.8 mm].50 [12.7 mm] Nom. Outdoor Double () ccepts GG-4D-TS [63.5 mm] 2.85 [72.4 mm].75 [19.1 mm] 1.37 [34.8 mm].15 [3.8 mm].50 [12.7 mm] Nom. Outdoor Low Profile 1.50 [38.1 mm] 1.96 [49.8 mm].34 [ 8.6 mm] () ccepts NS Outdoor pplications Push the seal ring (G-SR-1/2) onto outdoor port (see page 49 for seal ring info.) Install connector finger tight Using a wrench, tighten to system specifications Corning Gilbert roadband Products Tel: / Fax: /

8 Female F Splice Female Splice () () (C) ccepts GF GF GF-81-S ccepts C Spring Contact TYP C Female Splice ccepts () () (C) ccepts GF-81-TS GF-81-HP Spring Contact TYP 1 High Performance Spring Contact for Superior Return Loss Female Splice () () (C) ccepts ccepts C GF-81-HP GF-81-HP Spring Contact TYP High Performance Spring Contact for Superior Return Loss Female Splice ccepts GF-81--SP [10.2 mm] ccepts 1.14 [29.0 mm] Spring Contact TYP.56 [14.2 mm] 46 Corning Gilbert roadband Products Tel: / Fax: /

9 F Series.34 [8.6 mm] Double "D" Flat ccepts Female Chassis ccepts GF TYP.72 [18.3 mm] ccepts Double "D" Flats Female Chassis ccepts GF-61-S [7.2 mm].035 [.9 mm] Dia. Pin TYP Double D Flat Male Chassis GF-59-CH [27.4 mm].030 [.8 mm] Dia. Pin TYP F Male to F Male Splice GF-71-M Corning Gilbert roadband Products Tel: / Fax: /

10 F Series 90 F dapter ccepts GF-MF/ [.6 mm] Dia. Pin ccepts 1.17 [29.7 mm] F Push-On dapter ccepts Diameter Diameter C GPF NS ccepts ccepts.375 [9.5 mm] Dia. Right Handed Diameter Diameter C DIMOND KNURL HNDLE 2.25 [57.2 mm] Security Shield Tool 7/16 [11.1 mm] HEX.33 [8.4 mm] Slo G-S [69.9 mm] Security Shield C Material () () (C) NS Steel For use with Terminator and Security Shield Tool above 48 Corning Gilbert roadband Products Tel: / Fax: /

11 F Series ccesories When installed on a standard "F" female port, (NSI/SCTE-IPS-SP ), this product gives a weather resistant seal with any UltraSeal or Gilbert 360 series connector. Seal Ring G-SR-1/2 Contact our Technical Support Team for correct applications and for availability in other sizes 1.49 [37.9 mm].024 [.6 mm] NC Female to F Male Impedance G-NCF-FM 75 Ohms 1.25 [31.9 mm] Universal NC Connector Crimp Size Cable Type G-NC-59-HS/US-L.360 Hex 59 Series 40% - Quad G-NC-6-HS/US-L.360 Hex 6 Series 40% - Quad 75 Ohm NC Male Interface 1.46 [37.1 mm].36 [9.1 mm] NC Male to F Female ccepts Impedance ccepts G-NCF-MF 75 Ohms Corning Gilbert roadband Products Tel: / Fax: /