Amphenol AMPHENOL SOLAR PRODUCTS. Energy Amphenol Industrial

Transcription

1 AMPHENOL SOLAR PRODUCTS 1

2 HELIOS H4 FULL ACCORDING NEC 2008 Although the electrical connectors attached to the ends of the module cables are finger safe when new, if they are opened under load, the dc arc may damage the insulation and the connectors may then pose a shock hazard. Therefore, there are new requirements in for locking connectors in the 2008 NEC. A tool will be required to open these locking connectors. They will also soon be appearing on most, if not all, PV modules, although they are only required when the PV array wiring is operating above 30 volts and is readily accessible (690.33). Amphenol Helios H4 is designed to meet NEC 2008 standards without requiring additional locking mechanism. Benefits are: Lower overall cost design to comply with the new NEC codes Connector can be repeatedly mated and unmated without destroying the locking feature. Simple unlocking tool provided with every 10 connectors Intermateble with the industry standard connector Ratcheting cable seal caps to prevent inadvertent opening AMPHENOL, NO EXTRA ACCESSORIES TYCO EXTRA LOCKING COLAR MC4 EXTRA LOCKING SLEEVE 2

3 HELIOS H4 CONTACT TECHNOLOGY H4 uses a newly designed Radsok grid machined contact that has superior electrical performance as compared to the competition. Benefits: Self cleaning grid Extremely low temperature rise Simple unlocking tool provided with every 250 connectors Lowest voltage drop and les than 0,25mOhm contact resistance Rated to 52A and tested up to 90A Delivers the most power from the module 3

4 HELIOS H4 CURRENT RATING

5 HELIOS H4 CABLE CONNECTOR HELIOS H4 FEMALE HALF HELIOS H4 MALE HALF 5

6 HELIOS H4 PANEL CONNECTOR HELIOS H4 FEMALE HALF HELIOS H4 MALE HALF 6

7 HELIOS H4 CABLE CONNECTOR CO MOLDED

8 HELIOS H4 ASSEMBLY HELIOS H4 ASSEMBLY HELIOS H4 CO MOLDED ASSEMBLY 8

9 HELIOS H4 CABLE POWERLINK SOLAR CABLE STRANDED SOLAR CABLE TIN PLATED COPPER CROSS LINKED POLYMER JACKET UL 4703 APPROVED, TUV PENDING 2.5, 4.0, 6.0 AND 10MM² ARMORLINK ARMORED SOLAR CABLE STRANDED SOLAR CABLE TIN PLATED COPPER CROSS LINKED POLYMER JACKET 2.5, 4.0 AND 6.0MM² ARMORED RODENT PROOF DESIGNED TO UL PV WIRE CLASSIFICATION UL AND TUV PENDING NOTE: REELS OF 4,000 MT IN BLACK COLOR (OTHER COLORS ON REQUEST LIKE RED AND BLUE) 9

10 HELIOS H4 TOOLING CRIMP TOOL STRIP TOOL WRENCH TOOL RING TOOL UNIVERSAL TOOL

11 AMPHOTON JUCTION BOX Serviceable gasketed cover many variations of busbar termination type Non Serviceable potted version Multiple diode configurations Cable Gland or connector cable entry Solder of Clip Fit terminals 11

12 AMPHOTON PENCIL CLIP JUCTION BOX Low profile, stable performance and easy to install commonly applied in BIPV. Provide user with a practical and economical solution. Tin soldering connection 12

13 HELIOS THERMALINK OVERMOLDED JUCTION BOX Excellent heat dissipation Over molded design (IP67 or 68) Maintenance free Automatic assembly (see example Availability 3 nd quarter

14 HELIOS THERMALINK OVERMOLDED JUCTION BOX X1 Junction Box Technical data Electrical data Voltage rating Rated current 1000Vdc 15A Mechanical data Overall dimensions Insulation materials Terminals for ribbons Contact materials Contact principle for copper ribbons Bypass diodes Cable Connectors mm PPO 4 tabs Copper, tin plated Resistance welded or soldered 3, Schottky barrier type, low forward voltage 2 Powerlink solar cable, 4mm² PV WIRE rated, 1 meter length. H4 solar connector 4mm² with snap in locking. Environmental data Temperature range 40⁰C to +105⁰C Chemical resistance UV and ozone resistant Protection mode IP 67 Compliance IEC 61730, IEC 61215, UL 1703, RoHS Benefits Preassembled unit, ready to install Easy handling and quick assembly, manual or automatic Reduced installation time Maintenance free during the entire life cycle Excellent heat dissipation 14

15 HELIOS BLACK BOX

16 HELIOS OVERMOLDED THIN FILM JUCTION BOX Smaller, low profile junction box (credit card size) Geared towards thin film, but suitable for lower power glass panels too Totally overmolded with cooling features Limited to 2 position, with single diode configuration, common to TF Complete with cables, connectors, and ready for automated assembly Currently we have used and tested 30A surface mount style diodes (40% more efficient) Availability 2 nd quarter 2010 Spring clip options

17 HELIOS OVERMOLDED SINGLE POLE JUCTION BOX SERVICEBLE

18 HELIOS OVERMOLDED SINGLE POLE JUCTION BOX NON SERVICEBLE

19 OTHER OVERMOLDED SOLUTIONS

20 HELIOS NEXT GENERATION SPLIT TYPE JUCTION BOX Split type junction box with no diode Integrate H4 connector, so easy handling for module manufacturer during automatic assembly Reduce length of ribbon band from module, so less power loss Reduced wire length in installation Reduced cost for module manufacturer due to no cable presence Availability 3 rd quarter 2010

21 HELIOS NEXT GENERATION SPLIT TYPE JUCTION BOX TODAY TOMORROW

22 AMPHENOL INVERTER AC CONNECTORS

23 C16 M ECOMATE FOR UP TO 3KW PV INVERTERS cables from 0,75 to 2,5sqmm 16A per contact at 55C screw termination for field installation IP65/IP PE 400V rated UL94 V0 UL listed threaded coupling

24 C16 3 HIGH CURRENT FOR UP TO 6KW PV INVERTERS cables from 1,5 to 6,0sqmm 36A per contact at 55C screw termination for field installation IP PE 600V rated UL94 V0 UL listed reverse bayonet coupling

25 GTR SERIES FOR UP TO 15KW PV INVERTERS cables from 10 to 25sqmm 140A per contact at 55C screw termination for field installation IP65/IP PE or 3 +PE + GND 1000V rated UL94 V0 UL listed reverse bayonet coupling