Data sheet C6 A RJ45 field plug pro

Transcription

1 Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable straight (180 ) cable feed easy assembly - connection without special tools wire connection: stranded wire AWG 27/7 to 22/7, wire diameter from 0.46 to 0.76 mm wire connection: solid wire AWG 26/1 to 22/1, wire diameter from 0.4 to 0.64 mm transmission characteristics Cat.6 A per ISO/IEC Ed.2.2: compliance with class E A to ISO/IEC Ed.2.2: , DIN EN : suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT degree of protection IP20 for cable jacket diameter from 5.5 to 10.5 mm zinc die-cast housing for industrial use consists of only 2 parts strain relief by latching clip directly on the stuffer cap protected locking hook reconnectable

2 Page 2/6 General Data Fields of application Design Shielding Transmission technology Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Field assembly ability Multi-port capability Labeling option Marking option Structured building cabling Plugs shielded Copper black x 13.8 x mm x x 0.65 in. on housing by latching clip Transmission characteristics Category (ISO) Class (ISO/IEC) Category (TIA) Remote Powering PoE PoE plus UPoE HDBaseT Transmission rate up to 10 GBit 6 A E A 6A IEEE 802.3af IEEE 802.3at IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 1 Number of ports interface 2 equipped 1 Number of positions/contacts interface 1 8 Number of positions/contacts interface 2 IDC-connection RJ45 plug 8P/8C

3 Page 3/6 Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1-22/1 Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) mm² mm in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 27/7-22/7 Conductor cross section, stranded wire Conductor diameter, stranded wire (bare copper) Conductor diameter, stranded wire (bare copper) Cable sheath diameter (min. - max.) Cable sheath diameter Cable sheath diameter Cable access/outlet 180 Reconnectibility Shield connection mm² mm in mm in., if cross section is greater or the same flexible contact spring Electrical characteristics Current carrying capacity Rated voltage Contact resistance Insulation resistance Dielectric strength conductor-conductor (secondary) Dielectric strength conductor-shield max. 1 A max. 50 V max. 20 mohm min. 500 MOhm 1000 V DC 1500 V DC Mechanical characteristics Mounting method Insertion and withdrawal force snap-in function max. 20 N Life - Number of mating cycles min. 750 Position/mounting of latch - standard installation position strain relief top latching clip

4 Page 4/6 Materials and material properties Material - Housing Material - Contact Material - Contact finish Material - Latch Material - Finish GD-Zn (zinc die-cast) CuSn (tin bronze) Ni + Au (nickel-gold) Plastics Ni (nickel) Environmental conditions Temperature (min. - max.) Temperature - Storage C C Temperature - Storage F F Temperature - Operating C C Temperature - Operating F F Particulate ingress Liquid ingress/immersion Electromagnetic measurement E 2 IP2X IPX0 Certifications GHMT Component GHMT component - Validity period Approvals CE RoHS UL listed (file no.) compliant compliant DUXR.E178484

5 Page 5/6 The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C Office buildings ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C Industrial area ISO/IEC DIN EN : TIA/EIA 1005 Living units ISO/IEC DIN EN : TIA/EIA 570-B Application-specific communications cabling systems Profinet Industrial communication networks - Installation of IEC communication networks in industrial premises Connectors for electronic equipment Free and fixed connectors IEC Interference proof Immunity for industrial environments DIN EN : Emission proof Electromagnetic emission for residential, DIN EN : commercial and light-industrial environments Railway applications Electronic equipment used on rolling stock DIN EN Fire protection on railway vehicles DIN EN Classifications ETIM 5.0 ETIM 6.0 EC EC Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 10 pc(s) / box g 0.91 lb x x mm x x in.

6 Powered by TCPDF ( Data sheet Illustrations Dimensional drawing Page 6/6