MW HYDRAULIC POWER UNIT
|
|
- Janice Clara West
- 6 years ago
- Views:
Transcription
1 MW HYDRAULIC POWER UNIT Technical Catalogue January 2018 web edition
2 2018 Dana Brevini S.p.A. All rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics, VPS Brevini, OT Oiltechnology, logos are trademarks or are registered trademarks of Dana Brevini S.p.A. or other companies of the Dana Group in Italy and other countries. The technical features supplied in this catalogue are non binding and no legal action can be taken against such material. Dana Brevini will not be held responsible for information and specifications which may lead to error or incorrect interpretations. Given the continuous technical research aimed at improved technical features of our products, Dana Brevini reserves the right to make change that are considered appropriate without any prior notice. This catalogue cannot be reproduced (in while or in part) without the prior written consent of Dana Brevini. This catalogue supersedes all previous ones. Use of the products in this catalogue must comply with the operating limits given in the technical specifications. The type of application and operating conditions must be assessed as normal or in malfunction in order to avoid endangering the safety of people and/or items.
3 MW HYDRAULIC POWER UNIT ORDERING CODE MW* - A * / A * - P * - M ** * - T ** - F * Hydraulic power unit type Page MW Standard 2 MW1 With cylinder differencial volume drain and manual 3 override MW2 With cylinder differencial volume drain 4 Mounting type 0 Verticale without tank 1 Horizontal 2 3 Vertical 4 5 Page A Pressure relief valve on (screw adjustment) F Mounting position tank Setting range A B C A Setting range A B C bar bar 5 30 bar Pressure relief valve on (screw adjustment) bar bar 5 30 bar Page 2 Page 2 Tank type K05 K1 H1 Q1 Q T 0.5 liters 1 liter 1 liter 1 liter 2 liters 1 liter 2 liters 3 liters 5 liters 6 liters 8 liters Tank Plastic Page Steel 14 P Reverse pump PHV 0.5 Nominal displacement A B C 0.25 cc/rev 0.45 cc/rev 0.56 cc/rev D J Z 0.75 cc/rev 0.92 cc/rev 1.26 cc/rev Page Mounting position motors Pages DC motors Page AC motors Page GA 12V CC kw 6 R Size GB 24V CC kw 6 L Size HF 12V CC kw 7 M Size HE 24V CC kw 7 GC 12V CC kw 8 GD 24V CC kw 8 GU 12V CC kw 9 GZ 24V CC kw 9 M DC/AC motors ORDERING CODE EXAMPLE STANDARD VERSION OVERALL DIMENSIONS MW- AA/AA- PB- MGB5- TK1-F1 Hydraulic power unit type MW reversible type, with pressure relief valve on, setting 25 to 80 bar with adjustable screw, pressure relief valve on setting 25 to 80 bar with adjustable screw, pump a 0.45 cc/rev, DC motor 24 Volt 0.4 kw in standard mounting position, standard 1-liter fuel tank mounted horizontally
4 MW HYDRAULIC POWER UNIT STANDARD VERSION M10 (t.u. 13.5) Ø O-Ring 88.62x G 1/4 G 1/4 2
5 MW1 HYDRAULIC POWER UNIT WITH CYLINDER DIFFERENCIAL VOLUME DRAIN AND MANUAL OVERRIDE M10 (t.u. 13.5) Ø O-Ring 88.62x G 1/4 G 1/4 3
6 MW2 HYDRAULIC POWER UNIT WITH CYLINDER DIFFERENCIAL VOLUME DRAIN M10 (t.u. 13.5) Ø O-Ring 88.62x G 1/4 G 1/4 4
7 PUMPS PUMP GR 05 OVERALL DIMENSIONS 32 G1/4 16 Aspirazione Suction G ¼ T.U. 12,5 mm ± ±0.1 C Ø 55. Ø Ø N.2 OR 90 Sh. 6.07x1.78 L 14 Tightening torque Nm Symbol Code Nominal displacement (cc/rev) C (mm) L (mm) Pump code Pump Kit code Max working pressure (bar) Peack pressure (bar) Max RPM (rpm) A B C D J Z
8 ELECTRIC MOTORS 12VDC 0.35 KW / 24VDC 0.40 KW MOTORS Mounting position Ø80 Position 6 Position 7 Position 8 For more details, features and performances DC motors, see catalog Dana Brevini cod. DOC ORDERING CODE M ** * Code Description Motor M ** * GA 12VDC motor kw GB 24VDC motor kw DC motors permanent magnet Rotation CCW-CW Protection class IP54 Insulation class F Code Mounting position 5 Position 5 6 Position 6 7 Position 7 8 Position 8 6
9 ELECTRIC MOTORS 12VDC 0.50 KW / 24VDC 0.50 KW MOTORS Mounting position Ø 78 Position 6 Position 7 Position 8 For more details, features and performances DC motors, see catalog Dana Brevini cod. DOC ORDERING CODE M ** * Code Description Motor M ** * HF Motor 12VDC kw HE Motor 24VDC kw DC motors permanent magnet Rotation CCW-CW Protection class IP54 Insulation class F Code Mounting position 5 Position 5 6 Position 6 7 Position 7 8 Position 8 7
10 ELECTRIC MOTORS 12VDC 0,7 KW / 24VDC 0,8 KW MOTORS Mounting position Ø80 Position 6 Position 7 Position 8 For more details, features and performances DC motors, see catalog Dana Brevini cod. DOC ORDERING CODE M ** * Code Description Motor M ** * GC 12VDC motor kw GD 24VDC motor kw DC motors permanent magnet Rotation CCW-CW Protection class IP54 Insulation class F Code Mounting position 5 Position 5 6 Position 6 7 Position 7 8 Position 8 8
11 ELECTRIC MOTORS 12VDC 0.80 KW / 24VDC 0.80 KW MOTORS Mounting position Ø 78 Position 6 Position 7 Position 8 For more details, features and performances DC motors, see catalog Dana Brevini cod. DOC ORDERING CODE M ** * Code Description Motor M ** * GU Motor 12VDC kw GZ Motor 24VDC kw DC motors permanent magnet Rotation CCW-CW Protection class IP54 Insulation class F Code Mounting position 5 Position 5 6 Position 6 7 Position 7 8 Position 8 9
12 ELECTRIC MOTORS AC MOTOR - FRAME B14 Z A Position 5 X Position 8 Position 6 Position 7 ATTENTION Adjust the Z value and lock the coupling with the screw (A). - After the electrical connection, check the rotation direction for max 1 second (pump discharge), you will avoid irreparable damage to the pump. Code Size kw kw kw Z X (2 poles) (4 poles) (6 poles) (mm) (mm) R L M Frame B14 ORDERING CODE M * * Code Description Motor kit M ** * R Motore taglia 63 KIT L Motore taglia 71 KIT M Motore taglia 80 KIT Code Mounting position 0 Without motor 5 Position 5 6 Position 6 7 Position 7 8 Position 8 10
13 TANKS NYLON TANK TK ORDERING CODE T K05 * Code Capacity (nominal lt.) Tank type Tank kit F * K Nylon (visual oil level) Code Mounting position 02 Vertical 11
14 TANKS NYLON TANK TK1 - TH1 Tank TK1 (horizontal) Tank TH1 (horizontal) Tank TH1 (vertical) 92 Mounting position Position F3 Position F4 Position F2 View from A Position F5 Joint for vertical mounting ORDERING CODE T * * Capacity Code Tank type Tank kit F * (nominal lt.) K1 1 H1 1 Nylon (visual oil level) Nylon tank reinforced with fiberglass (visual oil level) Horizontal Vertical Code Type TK1 TH1 Mounting position 0 X Vertical without tank 1 X X Horizontal 2 X X 3 X Vertical 4 X (referred to the filling cap) 5 X 12
15 TANKS NYLON TANK Q1 - Q2 L ORDERING CODE T * * Code Capacity L Tank type (nominal lt.) (mm) Tank kit Q1 1 In nylon (livello Q2 2 olio visivo) F * Code Mounting position 0 Vertical without tank 1 Horizontal Vertical (referred to the filling cap) 13
16 TANKS STEEL TANKS T01 - T02 - T03 - T05 - T06 - T08 48 T1 - T02 - T03 tank 62 T05 - T06 - T08 tank Ø 123 Ø L L Adapter flange kit Position F (T01 - T02 - T03) 129 (T05 - T06 - T08) Position F4 F2 position Joint for vertical mounting View from A Position F5 ORDERING CODE T * * Code Capacity Tank L Tank kit Flange (nominal lt.) type (mm) horizontal vertical kit F * 01 1 Steel Steel Steel Steel Steel Steel Code Mounting position 0 Vertical without tank 1 Horizontal Vertical (referred to the filling cap) 14
17 Note 15
18 Note 16
19
20 Code DOC Rev. 05 Dana Brevini S.p.A. Via Luciano Brevini 1/a Reggio Emilia Tel Fax info@brevinifl uidpower.com
DIRECT CURRENT MOTORS
DIRECT CURRENT MOTORS Technical Catalogue November 2 web edition Index DC motors Description Type Page Introducion 2 V DC -.35 kw - D. 2521 V DC -. kw - D. 252 6 V DC - kw - D. 252 V DC - kw - D. 253
More informationP.T.O. GEARBOXES Technical Catalogue October 2017
GEARBOXES Technical Catalogue October 7 web edition Gearboxes Table of contents Introduction... ML Speed increaser gearbox for pumps GR. with European unified flange... ML5 Speed increaser gearbox for
More informationSU-IM-IE SUPPORTS AND CLUTCHES. Technical Catalogue
SU-IM-IE SUPPORTS AND CLUTCHES Technical Catalogue May 6 The company Brevini Fluid Power, part of the Brevini group, was established in in Reggio Emilia where it has its head office. Brevini Fluid Power
More informationHPV310 PROPORTIONAL DIRECTIONAL VALVES
HV0 ROORIONL DIRECIONL VLVES echnical Catalogue January 08 web edition HV 0 General Optimised performances and integration of the greatest number of functions are the objectives planned and achieved through
More informationHPV310 PROPORTIONAL DIRECTIONAL VALVES. Technical Catalogue
HV0 ROORIONL DIRECIONL VLVES echnical Catalogue May 0 he company revini Fluid ower, part of the revini group, was established in 00 in Reggio Emilia where it has its head office. revini Fluid ower manufactures
More informationSERVICE MANUAL PUMP S5AV 32-45
SERVICE MANUAL PUMP S5AV 2-45 Page Intentionally left Blank Foreword Index Foreword... Layout and use of this manual... 4 Notice... 4 Safety instructions... 4 Product identification and serial number...
More informationHF C dc power packs for the use with external valves
HF C200 series Hydraulfunktion has more than 20 year successfully manufactured and constantly improved box type dc power packs. Based on our experience we have developed C200 series as new product line.
More informationHF C dc power packs for single acting function
HF C200-06 dc power packs for single acting function HF C200 series Hydraulfunktion has more than 20 year successfully manufactured and constantly improved box type dc power packs. Based on our experience
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationSolenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationOildyne. Miniature Piston Pumps 5 Piston Design. Pressures to 276 bar (4000 psi) Displacements from.156cc/rev to.865cc/rev (.01 to.
Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29 Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationMC HYDRAULIC POWER PACK
MC HYDRAUIC OWER ACK echnical Catalogue January 2018 web edition able of contents i Introduction... 2 Endhead configuration... 3 ower pack sections... 5 Selection code... 6 Endhead overall dimensions...
More informationStand alone 4/3, 4/2 solenoid operated directional valve
Stand alone 4/3, 4/2 solenoid operated directional valve (LF ) FAN DRIVE (LF ) RE 1835-4 Edition: 2.216 Replaces: 7.12 7.212 LF1 Size 6 LF2 Size 1 Series LF1 Maximum operating pressure 31 (45 ) LF2 Maximum
More informationSTANDARD ONDUFIL TM MULTI-TURN SPRING WASHER RANGE
per turn RD0223S320025IX 22.0 18.0 2.0 x 0.25 3.5 3 5.8 3.0 4.0 1.4 RD0223S420025IX 4 7.8 4.0 4.0 1.0 RD0223S520025IX 5 9.6 4.3 4.0 0.7 RD0223S620025IX 6 11.0 5.0 4.0 0.7 RD0223S720025IX 7 12.7 5.8 4.0
More information3/2 ways/positions flow diverters L (VS91-VS92-VS95)
3/2 ways/positions flow diverters L706... (VS91-VS92-VS95) RE 18302-03 Edition: 04.2016 Replaces: 02.2016 Size 12 Series 00 Maximum operating pressure 310 bar (4500 psi) Maximum flow 140 l/min (36.98 gpm)
More information4/3-4/2 Directional valve elements LF1_1 (LC1F-Z)
4/3-4/2 Directional valve elements LF1_1 LC1F-Z) RE 18305-01 Edition: 02.2016 Replaces: 07.12 07.2012 Size 6 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 35 l/min 9.25 gpm) Ports
More information4/3 and 4/2 Proportional directional valve elements L8580 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING
/ and / Proportional directional valve elements L88 with flow (EDC-P) sharing control (LUDV concept) PATENT PENDING L88 (EDC-P) RE 181-9 Edition:.16 Replaces: 7.1 7.1 Size 6 Series Maximum operating pressure
More informationDirectional valve elements L808103P (ED4-PT1) of Tank unloaded excess flow. RE Edition: Replaces:
Directional valve elements L80810P with proportional (ED4-PT1) control of Tank unloaded excess flow L80810P (ED4-PT1) RE 1801-1 Edition: 09.2016 Replaces: 07.12 01.2016 Size 6 Series 00 Maximum operating
More informationValve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
More informationStand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ)
Stand alone 4/3, 4/2 direct acting directional valve LF2_1 (LC2F-DZ) RE 18305-03 Edition: 02.2016 Replaces: 07.12 07.2012 Size 10 Series 00 Maximum operating pressure 250 bar (3600 psi) Maximum flow 90
More information6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
More informationBrochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
More informationHPV310 PROPORTIONAL DIRECTIONAL VALVES. Technical Catalogue
HV0 ROORIONL DIRECIONL VLVES echnical Catalogue December 0 he company revini Fluid ower was established in 00 in Reggio Emilia where it has its head office. revini Fluid ower manufactures hydraulic components
More information6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
More informationD SERIES HYDRAULIC PUMP
uk distributor for D SERIES HYDRAULIC PUMP quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk Introduction to Concentric D Series Hydraulic Pumps Concentric offers one
More informationNominal sizes 08 to 10, special cavities
Nominal sizes 08 to 10, special cavities RE 18301-91 Edition: 05.2016 Replaces: 07.2012 Contents Relief, direct acting guided poppet type Common cavity, Size 10 2 Relief, direct acting guided poppet type
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationM F OS 50- K1.2-2A- O10 F- B- PH ( ) Motor Fixed Displacement Options Reference Page 16 Reference Drawing Page
Orbital Motor, 8-985 cc/rev Series: MFO SAE 0-1900 N-m (1401 ft.-lbs.) 5-1950 rpm Features High torque at low speeds with smooth operation Orbital Rotor and Roller gear set providing low pressure start
More informationCompact power pack program RE 00163/ The Drive & Control Company
Compact power pack program RE 00163/08.06 he Drive & Control Company Bosch Rexroth Oil Control Compact power pack program Compact power pack modular system Compact power packs are available with standard
More information4/3 and 4/2 Proportional directional valve elements L8581 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING
4/3 and 4/2 Proportional directional valve elements L881 with flow (EDC-P1) sharing control (LUDV concept) PATENT PENDING L881 (EDC-P1) RE 1831-1 Edition: 6.218 Replaces: 7.12.217 Size 6 Series Maximum
More informationSolenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationPump SCP / SCPT 090,130 DIN, SAE
3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationHDP Series. Hydraulic Gear Pumps. high performance, custom design, low noise emission, high efficiency...
HDP Series Hydraulic Gear s high performance, custom design, low noise emission, high efficiency... www.hidrocel.com.tr 1 Contents Design of HDP s Range and characteristics HDP 3/61 ISO HDP 3/61 UNI HDP
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationCTR* /117 ED HYDRAULIC POWER UNITS. TANK CAPACITY from 8 lt to 150 lt. PUMP FLOW RATE from 1,6 lt to 41 lt HYDRAULIC SYMBOL
96 000/117 ED CTR* HYDRAULIC POWER UNITS TANK CAPACITY from 8 lt to 150 lt PUMP FLOW RATE from 1,6 lt to 41 lt DESCRIPTION The CTR* power units, are realised with a soaked gear pump and a vertically mounted
More informationREVERSIBLE HYDRAULIC POWER PACKS. 1 node/142/
REVERSIBLE HYDRAULIC POWER PACKS 1 node/142/ 2 Introduction Oil Sistem is a leader in power packs production and offers a wide range of solutions suitable for every type of application. Oil Sistem developed
More information6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
More information6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
More information4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ)
4/3 and 4/2 on-off directional valve elements L8511 with flow (EDC-DZ) sharing control (LUDV concept) L8511 (EDC-DZ) RE 1831-11 Edition: 6.218 Replaces: 7.12 2.216 Size 6 Series Maximum operating pressure
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 183-52/7.12 Replaces: 1.9 1/8 8_8 (EDZ) Size 4 Series Maximum operating pressure 31 bar
More informationSERVICE MANUAL PUMP S5AV 75-90
SERVICE MANUAL PUMP S5AV 75-90 Page Intentionally left Blank Foreword Index Foreword... 3 Layout and use of this manual... 4 Notice... 4 Safety instructions... 4 Product identification and serial number...
More information4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING
/ Proportional directional valve elements L8P with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING L8P (EDC-IP) RE 8- Edition:.6 Replaces: 7. Size 6 Series
More informationVoltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]
Open condensing units with air condenser and semi-hermetic compressor Galvanized and painted in RAL7035 base Semi-hermetic compressor Air condenser unit with 4 poles fans 230/1 Vibration absorber on discharge
More informationTECHNICAL CATALOGUE FD/FDM FDM
l. ORS TECHNICAL FLOW DIVIDERS DATA FD/FDM MODEL SERIES TECHNICAL CATALOGUE FD FD bar FDM bar FDM INDEX GENERAL INFORMATION rpm - - - 950 - - - - - 950 - - - - - 950 - - - - - 0 - - - - - 0 - - - - - 750
More informationBrushless servo motors as replacements for conventional disk armature motors
MC 17-Bl MC 23-Bl Brushless servo motors as replacements for conventional disk armature motors 1 MOTOR TECHNOLOGY LTD MOTEC HOUSE, CHADKIRK BUSINESS PARK, STOCKPORT, CHESHIRE SK6 3NE ENGLAND TEL: +44 (0)161
More informationS300 L series positive displacement metering pump
S300 SERIES www.signal-pumps.co.uk S300 L series positive displacement metering pump Operating capacities from 1.5 to 22,000 litres/hour from 400 to 5 bar A range of high temperature head materials includes
More informationSystem description for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines
for cylinder lubrication and valve seat lubrication on large 4-stroke diesel engines Valve seat lubrication Cylinder lubrication Version 04 Page 2 for cylinder lubrication and valve seat lubrication on
More informationGlobal Gear Products. Brochure. SAE A-Aluminum (Group 2)
Global Gear Products Brochure SAE A-Aluminum (Group 2) High Efficiency, Low Noise Applications for Eaton Gear Products Turf care Agriculture tractors and harvesters Lift trucks Skidsteer loaders Fan drive
More informationTAP Gear Pumps Technical Information Tap Gear Pumps Standard Flange. OpenCircuitGear. Installation dimensions. Specification Data
Tap 60-00 Gear Pumps Standard Flange Installation dimensions Tapered Shaft Parallel Shaft Splined shaft Type Capacity cc/rev Displacement at 1000 RPM litres/min. Max pressure bar Max speed rev/min. A B
More informationREVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) GENERAL MANAGER EQUIPMENT ENGINEERING & ASSET MANAGEMENT (HAMILTON NXUMALO)
REVISION 1 REFERENCE EEAM-Q-002 (ORIGINAL SPECIFICATION HE9.2.2 Ver6) DOCUMENT TYPE: SPECIFICATION TITLE: SPECIFICATION FOR HYDRAULIC EQUIPMENT PAGE 0 of 09 COMPILED BY REVIEWED BY REVIEWED BY PROJECT
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flow and an additional piggybacked gear pump for auxiliary service, open
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationServomotors and Drive Systems. Fastact H Series and Dx2020 Systems Guide
Fastact H Series and Dx2020 Systems Guide Fastact H Series Servomotors Matched With Dx2020 Drives The Moog Fastact H is a product line of DC permanent magnet servomotors that cover a broad range of torques
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together their technology, means they can be installed
More information4/3-4/2 Proportional directional valves L5080 solenoid (LC04P) operated (for open loop control) L5080 (LC04P)
/ - / Proportional directional valves L solenoid (LCP) operated (for open loop control) L (LCP) RE - Edition:. Replaces: 7. 7. Size Series Maximum operating pressure bar ( psi) Maximum flow l/min (.7 gpm)
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together with their technology, means they can be
More informationHigh-efficiency Drinking Water Pump. Rio-Eco Therm N. Type Series Booklet
High-efficiency Drinking Water Pump Rio-Eco Therm N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco Therm N All rights reserved. The contents provided herein must neither be
More informationBUSSMANN. LIMITRON FNQ-R Class CC 600Vac, A, time-delay fuses SERIES. Technical Data Carton quantity: Catalog symbol: Dimensions - in:
Supersedes January 204 BUSSMANN SERIES LIMITRON FNQ-R Class CC 600Vac, 4-30A, time-delay fuses Catalog numbers (amps) FNQ-R- 4 FNQ-R--3 FNQ-R-3-2 FNQ-R-8 FNQ-R-3 FNQ-R--4 FNQ-R-3-2 FNQ-R-9 FNQ-R-4 FNQ-R--
More informationlubrication systems PEGPEO 5N-10N-25N-210N pumps for progressive systems
lubrication systems PEGPEO 5N-10N-25N-210N pumps for progressive systems TABLE OF CONTENTS TABLE OF CONTENTS 2 Applications and operation 3 Technical data Operation 4 Tank 4 PEG-PEO 5N/10N/SM Electric
More informationMINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP
MINI POWER PACKS WITH SUBMERSED MOTOR AND PUMP CMI Summary table Essential characteristic of the control unit compact CMI is the arrangement of the motor pump unit completely immersed in the oil inside
More informationHydraulic Power Packs
Hydraulic Power Packs Hydraulic Pump / Hydraulic Valve / Hydraulic Accessory ISO 9001:2008/ISO 14001:2004 283 Danforth Avenue, Suite 348, Toronto, ON Canada M4K 1N2 www.lprglobal.com / www.uskoreahotlink.com
More informationHF Hydraulfunktion. dc hydraulic power packs and components
HF Hydraulfunktion dc hydraulic power packs and components HF Hydraulfunktion HF Hydraulfunktion is a Swedish manufacturer of hydraulic power packs and hydraulic components. We offer the most complete
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationEVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
More information7200/7300 Series Bottom Mount Drive Package for Standard Load Parallel Shaft Sanitary Gearmotors
7200/7300 Series Bottom Mount Drive Package for Standard Load Parallel Shaft Sanitary Gearmotors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
More information4/3-4/2 Directional valve with solenoid actuation
4/3-4/2 Directional valve with solenoid actuation RE 18305-08/12.13 1/10 L5110 LC1-Z ) Size NG6 ISO 4401-03 CETOP RP121 H-03 CETOP 3) Series 00 Maximum operating pressure 350 bar [5076 psi] Maximum flow
More informationProtection and Connection Motorized and automatic transfer switches IEC Technical guide
Protection and Connection Motorized and automatic transfer switches IEC 61439 Technical guide Motorized change-over switches Uninterrupted power supply with motorized functionality ABB offers a wide variety
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flows and an additional piggybacked gear pump for auxiliary service,
More informationCTR* /103 ED HYDRAULIC POWER PACKS TANK CAPACITY PUMP FLOW RATE SERIES 30. from 8 lt to 150 lt. from 1,6 lt to 77 lt ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➈
96 000/103 ED CTR HYDRAULIC POWER PACKS TANK CAPACITY from 8 lt to 150 lt PUMP FLOW RATE from 1,6 lt to 77 lt DESCRIPTION STANDARD COMPONENTS The CTR power packs, are realised with a soaked gear pump and
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
More informationDisplacement. (cc/rev) Tap Water Sea Water PC PV
J anus Pumps - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
More information6 to 12/2 ways/positions bankable flow diverters flangeable
6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/07.12 Replaces: 12.09 1/8 L711... (VS120F-VS125F) Size 4 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 20
More information6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
More information6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
More informationLenntech. Calio-Therm S. Type Series Booklet. High-efficiency Drinking Water Pump
Lenntech info@lenntech.com Tel. +--6-9 www.lenntech.com Fax. +--66-89 High-efficiency Drinking Water Pump Calio-Therm S Type Series Booklet Legal information/copyright Type Series Booklet Calio-Therm S
More information249.1 m3/h m3/h 7.23 MW m3/h 50.0 m3/h
No Filter 81.6 % Auto 9.1 m3/h 250.0 m3/h Auto 99.7 m3/h 100.0 m3/h Auto 91.3 m3/h 92.0 m3/h Auto 40.0 m3/h 7. MW Auto 50.7 m3/h 50.0 m3/h 7.2 % Auto.6 % 45.0 % ABB NF Contactor Relays Overview...3 Ordering
More informationVariable displacement axial piston pumps
Variable displacement axial piston pumps SVP series GENERAL INFORMATIONS Variable displacement axial piston pump swash plate design for open circuit-flow sharing control valve. The pump has been designed
More informationTechnical Documentation
Technical Documentation LOW VOLTAGE THREE PHASE TEFC CAGE MOTORS IE316EN Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
More information4/3, 4/2 proportional directional valves solenoid operated (for open loop control)
/, / proportional directional valves solenoid operated (for open loop control) RE -/7. Replaces: RE7/.7 / Type L (LCP) Size Series Maximum operating pressure bar [ psi] Nominal flow rated l/min [.7 gpm]
More informationSERIE 59S. Rear clamp. Frontal clamp INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS SIN/COS
INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 2.048 pulses per turn Shaft fixing through front or rear clamp External diameter 58 mm Hollow shaft Ø 10, 12 or 14 mm Protection
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationSOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
More informationMS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators
MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators FOR FIRE/SMOKE CONTROL APPLICATIONS FEATURES PRODUCT DATA APPLICATION The MS4104, MS4109, MS4604, MS4609, MS8104 and MS8109
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS 2012 2 The CALEFFI SOLAR product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More information2012 DC Electropumps Bull
1 DC Electropumps Bull sales@hydronit.com +39 3 1841 1 ELECTROPUMPS BULL series ordering codes ELECTROPUMP BULL 8 MODEL CODE EPB8 -,5 4DC /S15 - K1,1 V** Electro Pump Bull 8 series Dc electric motor power
More informationTechnical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
More informationABB Sace S.p.A. presents its new BSD servo system, a compact, high-performance and easy product.
BSD Series New BSD Series A complete range, ABB Sace S.p.A. presents its new BSD servo system, a compact, high-performance and easy product. The BSD servo drive meets the needs of engineers, looking for
More informationTQ series. Low-backlash gearboxes
TQ series Low-backlash gearboxes SUMMARY 1 General information... 1.1 Symbols, units and definitions... 1.2 Selecting the gear unit... 4 1. Service life of bearings... 6 2 Features of TQ series... 8 Ordering
More informationMonarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
More informationCTR* /108 ED HYDRAULIC POWER UNITS. TANK CAPACITY from 8 lt to 150 lt. PUMP FLOW RATE from 1,6 lt to 41lt
96 000/108 ED CTR* HYDRAULIC POWER UNITS TANK CAPACITY from 8 lt to 150 lt PUMP FLOW RATE from 1,6 lt to 41lt DESCRIPTION The CTR* power units, are realised with a soaked gear pump and a vertically mounted
More informationPAHT pump PAHT X
MAKING MODERN LIVING POSSIBLE Data sheet PAHT pump PAHT X 674 444 danfoss.high-pressurepumps.com Table of Contents 1. Introduction...3 2. Benefits...3 3. Application areas...3 4. Technical data...4 5.
More informationTechnical Documentation
Technical Documentation LOW VOLTAGE THREE PHASE TEFC CAGE MOTORS IE315EN Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
More information