TECHNICAL CATALOGUE FD/FDM FDM
|
|
- Patrick Barber
- 5 years ago
- Views:
Transcription
1
2
3 l. ORS TECHNICAL FLOW DIVIDERS DATA FD/FDM MODEL SERIES TECHNICAL CATALOGUE FD FD bar FDM bar FDM INDEX GENERAL INFORMATION rpm Pag FLOW DIVIDERS HYDRAULIC FLUID RECOMMENDATIONS rpm INSTRUCTION AND ADVICES FORMULAS HP CONVERSIONS power FD D kw FD D21 VB FD D FD D21 VB FD 1 -- power D FD 1 -- D47 kwvb FD D FD N of pistons: D47 VB FD D case : 6 bar FD D47 VB FD back D47 : bar FD Dry weight: D47 26 VB kg FD Temperature range: D90-30 C C FD D90 VB Minimum : 23 rpm FD Flushing flow (*) D : 5 l/min FD D90 VB l/min 24 FDM 34 D (*)for further details regarding flushing go to page 10 of this catalogue. FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 1
4 ORS FDM 34 D21 VB FDM D FDM D21 VB VALVE DIMENSIONS AND HYDRAULIC CIRCUIT MODEL ORDERING INSTRUCTIONS (FD SERIES) ORDERING INSTRUCTIONS (FDM SERIES) Displacement FLOW DIVIDERS SELECTION cc/rev CHART CONTACT US bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 2 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
5 TECHNICAL GENERAL DATA INFORMATION INTERMOT has been manufacturing RADIAL PISTON HYDRAULIC MOTORS since 1985: our yearly production is more than ITALGROUP units which we sell all over the world MODEL through our agents and authorized sellers. Our motor range varies from 20cc to 8500cc displacement and it is completed by two- motors and special motors created in cooperation with our clients for different applications such as : underwater, high & low and wheel motors and with the possibility to assemble valves, brakes or gear reductions. You can directly contact our Technical Department which will give you all the necessary support to find the right solutions to your problems. ITALGROUP INTERMOT a flexible work reality and manages deliveries also within the same day of order; we produce motors exactly interchangeable with our competitors, always ready on stock which our customers particularly appreciate. bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 3
6 MODEL ORS N of pistons per section TECHNICAL Flow per DATA section Displacement per section MODEL FLOW DIVIDERS Cont. Int. FD FD FD FD 50 FD bar FD FD 90 bar FD FD 1 bar FD 1 FD FD 1 rpm FD FD 2 FD rpm FD FD HP FD 3 37 FD power FD kw FD FD 4 FD HP FD 5 power FD 5 0 FD 5 kw FD FD 6 N 0 of pistons: FD 6 0 case : bar FD 6 FD 6 3 back : bar FD 6 Dry 3500weight: 265 kg FDM Temperature 34 range: C +70 C per section FDM Minimum 50 : rpm per section FDM FDM Flushing 75 flow (*) 9 : per 5 l/min section 6 l/min FDM per section (*)for further details regarding flushing go to page 10 of this catalogue. Continuous Int. power per section cc/rev bar bar bar l/min l/min HP kw kg Dry Weight pag. 4 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
7 HYDRAULIC FLUIDS ORS FILTRATION Hydraulic systems oil must always be filtered. Nm/bar µm filtration 3.1 in closed 3.3 circuit applications OXIDATION bar bar OIL VISCOSITY RECOMMENDATION rpm WATER 900 CONTENT N of pistons: 5 back : 70 bar FIRE RESISTANT Dry weight: OIL 26 LIMITATIONS kg HYDRAULIC FLUIDS RECOMMENDATIONS We recommend the use of hydraulic oils with anti-wear additives (ISO HM or HV) and minimum viscosity MODEL index of 95. Once normal working temperature is reached, oil viscosity must be at least 44 cst, preferably in the range from 50 to cst. Hydraulic oils meeting Denison MF-O, Vickers M-2952-S I S performance requirements and DIN specifications, are preferred. Pay particular attention if you use HE type oils (ecological fluid) because them can influence the motor seals compatibility, the motor performance and life. Please ask us for advice in case of HE type oils usage. Mineral hydraulic oils are divided into four main types, designated by the International Standards Organisation (ISO) as HH, HL, HM and HV. We advise to use only products with HM or HV specifications. HM type These are the most widely employed hydraulic oils. They include small quantities of anti-wear additives to provide significant improvement in wear reduction. "Superior quality HM type oils can be used for all equipment, with the added assurance that they will be suitable for the highest temperature. HV type HV hydraulic oils show minimal change in viscosity with temperature variations. Room temperature HM type ISO-VG -20 C / 0 C BP ENERGOL HLP - HM C /+5 C BP ENERGOL HLP - HM 32-8 C /+15 C BP BNERGOL HLP - HM 46 0 C /+22 C BP ENERGOL HLP - HM C /+30 C BP ENERGOL HLP - HM -20 C /+5 C BP BARTRAN HV C /+22 C BP BARTRAN HV 46 0 C /+30 C BP BARTRAN HV 68 Our motors have been designed to work also with: oils type ATF (Automatic Transmission Fluid) oils with power viscosity SAE 10W multigrade motor oils SAE 10 W/40 or 15 W/40 universal oils During cold start-up, avoid high- operation until the system is warmed up to provide adequate lubrication. Continuous working temperature must not exceed 70 C. Every 5-8 C of increase from the optimum working temperature, the hydraulic fluid life decrease of about 40-50% (see OXIDATION). case Therefore : the 6 motor bar life will be affected by consequence. HP DEGREE OF CONTAMINATION kw immediately investigated 40 and remedied Temperature range: -30 C +70 C HFA, 5-95% oil-water % HFB, 60-40% oil-water % HFC, water-glycol % HFD, ester phosphate 293 % The choice of filtration grade derives from needs of service life and money spent. In order to obtain stated service life it is important to follow our recommendations concerning filtration grade. When choosing the filter it is important to consider the amount of dirt particles that filter can absorb and still operate satisfactorily. For that reason we recommend filters showing when you need to substitute filtering cartridge. 25 µm filtration required in most applications Hydraulic oil oxidizes with time of use and temperature. Oxidation causes changes in colour and smell, acidity increase or sludge formation in the tank. Oxidation rate increases rapidly at surface temperatures above 60 C, in these situations oil should be checked more often. Every 5-8 C of increase from the optimum working temperature, the hydraulic fluid life decrease of about 40-50%. The oxidation process increases the acidity of the fluid; the acidity is stated in terms of the "neutralization number". Oxidation is usually slow at the beginning and then it increases rapidly. A sharp increase (by a factor of 2 to 3) in neutralization number between inspections shows that oil has oxidized too much and should be replaced immediately. Oil contamination by water can be detected by sampling from the bottom of the tank. Most hydraulic oils repel the water, which then collects at the bottom of the tank. This water must be drained off at regular intervals. Certain types of transmission oils and engine oils emulsify the water; this can be detected by coatings on filter cartridges or a change in the colour of the oil. In such cases, obtain your oil supplier advice. Heavy contamination of the oil causes wear rising in hydraulic system components. Contamination causes must be ANALYSIS In optimum operating conditions, we recommend to perfor an oil analysis 6 months. The analysis should cover viscosity, oxidation, water content, additives and contamination. Most oil suppliers are equipped to analyze oil state and to recommend appropriate action. Oil must be immediately replaced if the analysis shows that it is exhausted. Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 5
8 INSTRUCTIONS AND ADVICES GENERAL INFORMATION ON FLOW DIVIDERS MODEL If several motors or cylinders are operate from a single pump without any means of controlling their individual flows only the motor or cylinder with the lowest requirement would start its work cycle. The motor or cylinder with the next lower requirement would only start when the first SYNCHRONIZATION Italgroup unit has completed its work cycle. This mode of operation is normally undesiderable, the total pump flow must therefore be divided into a series of partial flows. This can be obtained In addition, due to the low leakage rate located in every in the following ways: Nm/bar individual section, 3.1 the high 3.3 syncronisation 4.1 degree 4.9 is - Throttles or flow regulation valves in each motor or maintained with different load conditions. cylinder cont. connection; The flow dividers are not able to compensate the errors - Operating the units in a bar series circuit; caused by different oil compression deriving from different - By the flow dividers utilisation. cylinder loads: therefore it is recommended minimize the oil volumes between the flow divider and the hydraulic actuators INSTALLATION by the usage of short pipes (of the same diameter) of equal Hoses and piping must be clean bar and free from contamination. length foe each actuator. If this is not enough the No other special requirements are necessary. synchronization error can be reduced or eliminated by an - Intermot always advices the application datasheet adequate use of relief valves. compilation to help the customer to perform the best Intermot flow divider type selection SYNCHRONIZATION RATIO - Flow divider can be mounted in any position In general, the synchronization ratio is 1:1. Other - In all the working conditions Intermot suggests the synchronization ratios are possible, to obtain more details valve block version selection please contact Intermot technical departement. - Consult factory for intermittent rpm applications INTERNAL PRESSURE DROP START UP The minimum recommended flow per section can be The flow divider case and pistons must be completely filled calculated as the 20% of the maximum flow (refer with oil before starting. Infact, the drain line rpm 1050 piping must 1050 be to the flow dividers technical data). To minimize the internal installed in a way that doesn t allow that the flow divider can be empty. Due to the low drain quantity it is absolutely necessary fill completely the flow divider before the start-up (this is fundamental for the first start-up especially). Do not load the flow divider immediately at the maximum and but increase the load gradually at start-up. Especially when the flow divider has a small displacement, do not start the flow divider when the outlet is already at the maximum value. CASE DRAIN CASE PRESSURE The flow dividers have many drain ports that are internally connected together. power At least one of these drain ports must be connected to the tank. For use flushing is required to maintain the operating fluid viscosity between the recommended values (see Hydraulics fluid recommendations). The case must not exceed 20 bar, in order to avoid the mechanical parts failure and flow divider leakage. N of pistons: 5 TEMPERATURE Refer to hydraulic fluid case recommendations. : 6 bar VISCOSITY Refer to hydraulic fluid back recommendations. : 70 bar HIGH PRESSURE Dry weight: APPLICATIONS 26 kg In case of high applications, a Nitemper treatment on motor body Temperature or in cylinders it range: is suggested -30 C to increase +70 C wear and tear resistance. MINIMUM Minimum FLOWS : 23 rpm The minimum Flushing recommended flow (*) flow : per section can be 5 l/min calculated as the 20% of the maximum flow (refer 6 l/min to the flow dividers technical data). Intermot flow dividers are of the radial piston design. Thanks to this characteristic, they can reach a very high accuracy. The synchronization error depends by different factors: - Oil viscosity and temperature; - System mean value and variability; - Total flow rate that must be divided. The approximate synchronization error is about ±0.5%. This synchronization degree is maintained over a wide flow range. drop, that is higher when the flow divider is working at high working s, basing on the fact that often the flow divider works in only one direction, the flow divider can be realized, for example, in the return line. Another possibility to reduce the drop, when the synchronization is required in the low s working phase only, the flow divider can be by-passed during the high working phase by using check valves. (*)for further details regarding flushing go to page 10 of this catalogue. pag. 6 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
9 VALVES Italgroup Intermot can provide balancing valves directly assembled on Intermot flow dividers. These valves are assembled together by the utilization of steel pipes supplied by Intermot to minimize the piping and fitting problems (see the next pages MODEL In some special conditions, for example when the load is not for more details). INSTALLATION CIRCUIT The use of flow dividers is not complicate if the hydraulic circuit has an appropriate design. Additional installation operations are not necessary. See even the internal drop paragraph for more details. sufficiently high to create the minimum difference that is needed to win the flow divider internal, the user can add a further section (with equal or biggier displacement than the other sections) with the return line of this section directly connected to the tank. With reference at the application example circuits, the check valves assure a minimum in each flow divider section (in other words them act as anticavitation valves). The M1, M2 and M3 ports can be used as manometer ports. Refer to page 29 to obtain more details about the valve data and circuit. bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min (*)for further details regarding flushing go to page 10 of this catalogue. FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 7
10 FORMULAS TORQUE (1) = ( specific torque) ( ) TORQUE (2) MODEL displacement [cc/rev] [bar] [Nm] = 62.8 POWER (1) [Nm] [rpm] Power [kw] = 9549 POWER (2) [Nm] [rpm] Displacement cc/rev Power [CV] = SPEED flow rate [l / min] 0 [rpm] = Nm/bar displacement [cc/rev] REQUIRED MOTOR max required torque [Nm] 62.8 DISPLACEMENT displacement [cc/rev] = max [bar] bar REQUIRED PUMP FLOW displacement [cc / rev] max [rpm] RATE flow [l/min] = 0 bar LENGTH 1 m bar = in lbf 350 = kgf 350 = 3.28 ft = N = yd = rpm 0 mm PRESSURE bar 0 = psi CONVERSIONS rpm = yd = kpa 850 = HP 273 ft = 36 in FLOW 1 l/min = gpm 1 km = 0 m = 0 cc/min = yd 1 gpm = l/min power 1 in = ft = 0.99 atm = 25.4 mm = 1.02 ata 1 ft = m = 000 Pa = 12 in = 0.1 MPa 1 yd = m 1 psi = bar = mile = 3785 cc/min 1 mile = km 1 m 3 /s = l/min = 1760 yd = gpm MASS 1 kg = lb VOLUME 1 m 3 = 0 l 1 lb = kg 1 l = 61,023 in 3 kw = 40 0,2640 galus 40 SPEED 1 m/s = 3.6 km/h 1 in 3 = 0,01639 l = mph = 16,39 cm 3 = 3.28 ft/s = 0, galus N of pistons: 5 1 km/h = m/s 1 galus = 3,7879 l case : = bar mph = 231,15 in 3 = ft/s POWER 1 kw = HP back 1 mph : = bar km/h = CV = m/s 1 HP = Kw = ft/s = CV Temperature 1 ft/s range: = -30 C m/s +70 C = km/h TORQUE 1 Nm = kgm Minimum : = rpm mph = lbf ft FORCE Flushing 1 N flow (*) = : kgf 1 kgm = 9.65 l/min Nm = lbf = lbf ft 6 l/min 1 kgf = lbf 1 lbf ft = kgm = 9.6 N = Nm (*)for further details regarding flushing go to page 10 of this catalogue. pag. 8 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
11 R MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min (*)for further details regarding flushing go to page 10 of this catalogue. FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 9
12 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 10 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
13 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 11
14 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min pag. 12 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
15 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 13
16 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 14 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
17 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 15
18 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 16 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
19 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 17
20 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 18 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
21 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 19
22 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 20 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
23 l. ORS MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min (*)for further details regarding flushing go to page 10 of this catalogue. FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 21
24 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 22 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
25 R MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 23
26 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 24 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
27 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 25
28 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 26 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
29 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 27
30 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 28 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
31 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 29
32 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 30 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
33 MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min (*)for further details regarding flushing go to page 10 of this catalogue. FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 31
34 l. ORS MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min pag. 32 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
35 l. ORS MODEL bar bar rpm power N of pistons: 5 case : 6 bar back : 70 bar Temperature range: -30 C +70 C Minimum : 23 rpm Flushing flow (*) : 5 l/min 6 l/min (*)for further details regarding flushing go to page 10 of this catalogue. FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 33
36 Note pag. 34 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
37 FD-FDM rev. 00 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. pag. 35
38 CONTACT US Italgroup Intermot S.r.l. Via Pacinotti 20/ Gaggio di Piano (Modena) Italy Tel Fax italgroup@italgroup.eu intermot@intermot.com internet: REACH US BRENNERO A22 MILANO PADOVA A1 Gaggio di Piano Castelfranco Emilia A13 Via Emilia ss 9 A1 A14 A1 ANCONA FIRENZE pag. 36 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristic in legal sense. Italgroup reserves the right to implement modifications without notice. FD-FDM rev. 00
39
40 ITALGROUP srl VIA PACINOTTI, 20/ GAGGIO DI PIANO CASTELFRANCO EMILIA - MODENA - Tel Fax italgroup@italgroup.eu Web Site: salvioli.it Cod. FD-FDM rev. 00
GENERAL INFORMATION HYDRAULIC MOTORS ITALY
GENERAL INFORMATION INTERMOT produces RADIAL PISTON since 1985: our yearly production is more than 13.000 units which we sell all over the world through our agents and authorized sellers. Our motor range
More informationIntermot Hydraulic Motors. Drum Brakes RC Series
Intermot Hydraulic Motors Drum Brakes RC Series TECHNICAL CATALOGUE INDEX General information Pag. 10 Technical data Pag. 14 Dimensional drawings Pag. 15 Ordering instructions Pag. 17 9 Hydraulic fluids
More informationIAC SERIES TECHNICAL CATALOGUE INDEX 8 DRAIN RECOMMENDATIONS 12 SHAFT SEAL FEATURES 13 FORMULAS CONVERSIONS 14
INTERMOT Italgroup DUAL dual DISPLACEMENT displacement MOTORS motors IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS
More informationW SERIES TECHNICAL CATALOGUE
WHEEL MOTOR W SERIES TECHNICAL CATALOGUE W 05 INDEX GENERAL INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pag. 2 W 05 G100 (Fixed displacement) (SIZE AND TECHNICAL DATA) -
More informationINTERMOT DUAL DISPLACEMENT MOTORS
INTERMOT DUAL DISPLACEMENT MOT IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3 4 7
More informationINTERMOT DUAL DISPLACEMENT MOTORS
INTERMOT DUAL DISPLACEMENT MOTORS IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3
More informationIntermot Hydraulic Motors. Brakes
Intermot Hydraulic Motors Brakes TECHNICAL CATALOGUE INDEX DISK BRAKES Pag. 2 DRUM BRAKES Pag. 9 1 Intermot Hydraulic Motors Disk Brakes F Series TECHNICAL CATALOGUE INDEX F21R F21DR Pag. 3 F80 F80S Pag.
More informationIAC. Dual displacement hydraulic motors
IAC Dual displacement hydraulic motors The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup
More informationDUAL DISPLACEMENT HYDRAULIC MOTOR
R8 C O 2DISPLACEMENT U PL E ITALY DUAL DISPLACEMENT HYDRAULIC MOTOR R8C SERIES TECHNICAL CATALOGUE The data specified into the catalogue are for product description purpose only and must not be interpreted
More informationIAC. Dual displacement hydraulic motors
IAC Dual displacement hydraulic motors All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden. 5 ITALGROUP S.R.L. - ALL RIGHTS RESERVED ITALGROUP
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80
More informationSingle displacement hydraulic motors High Cavitaton
HC Single displacement hydraulic motors High Cavitaton All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden. 201 ITALGROUP S.R.L. - ALL RIGHTS
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 HPM pag.3 TECHNICL FETURES ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 TECHNICL FETURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80 90 108 130
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationTPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationHYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationLow Speed High Torque Motors
Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps AR Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationAXIAL PISTON HYDRAULIC MOTOR HM
AXIAL PISTON HYDRAULIC MOTOR HM AXIAL PISTON HYDRAULICS MOTORS HM Function and description Hydraulic motors HM are axial piston units of bent axis type. They have fixed displacement and are designed for
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationFixed Displacement Bent Axis Axial Piston Pumps TPB 70 - TAP 70
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationIn line high pressure filters. HF 735 series
In line high pressure filters HF 735 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid.
More informationIn line high pressure filters. HF 725 series
In line high pressure filters HF 725 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the fluid.
More informationPVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationVariable displacement axial piston pumps
Variable displacement axial piston pumps SVP series GENERAL INFORMATIONS Variable displacement axial piston pump swash plate design for open circuit-flow sharing control valve. The pump has been designed
More informationHydraulic gear pumps S F P
Hydraulic gear pumps FR TRUCK APPLICATINS S F P DEX Section Description Page FEATURES 2 SFP 30 BASE PUMP 9 SFP 30 KIT 10 SFP 30 IS STANDARD VERSIN 0 11 SFP 30 IS STANDARD VERSIN 5 12 SGLE GEAR PUMPS SFP
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationThe radial piston power. COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT
The radial piston power www.italgroup.eu CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS Producers and worldwide distributors of radial piston hydraulic motors,
More information1.3 HIGH PRESSURE SERIES
1.3 HIGH PRESSURE SERIES content Ordering Code 1.3.1 High Pressure Series Technical Information 1.3.2 Specifications 1.3.3 Hydraulic Fluids 1.3.4 Viscosity Range 1.3.5 Temperature Range 1.3.6 Seals 1.3.7
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More informationE / Pump Specifications
Pump Specifications INTRODUCTION With over 7,500 employees worldwide, HYDAC is one of the leading suppliers of fluid technology, hydraulic and electronic equipment. HYDAC is your expert partner for the
More informationTHE IMPORTANCE OF AN EFFICIENT FILTRATION
In line high pressure filters HF 745 / HF 748 series THE IMPORTANCE OF AN EFFICIENT FILTRATION The main cause of anomalies in hydraulic systems has to be attributed to the presence of contaminants in the
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationThe product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.
Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS FEATURES Variable displacement axial piston pumps swash plate design ideally suited for medium and high pressure open circuit applications. The compact design allows
More informationISO Certificate N 12-E TIC. ISO 9001 Certificate N 12-Q TIC
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Certificate N 12-Q-0200545-TIC ISO 14001 Certificate N 12-E-0200545-TIC Via M. L. King,
More informationProduct Manual VIKING. EN397-3a 1999
Product Manual VIKING EN397-3a 1999 One partner all over the world Hägglunds Drives is one of the worlds leading manufacturer of heavy duty hydraulic drive systems. If what you need is low speed and high
More informationAxial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationOPERATING MANUAL. Black Bruin hydraulic motors S-series model D
S-series model D CONTENTS 1 GENERAL INSTRUCTIONS... 3 1.1 About the manual... 3 1.2 Revision comments... 3 1.3 Applicability... 3 1.4 Warranty... 3 1.5 Product identification... 3 2 INSTALLATION INSTRUCTIONS...
More informationRETURN FILTERS. MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass
COMPONENTS RC MATERIALS Head: Aluminium alloy Spin-on cartridge: Steel Bypass valve: Polyammide Seals: NBR Nitrile Indicator housing: Brass APPLICATION EXAMPLE PRESSURE (ISO 10771-1:2002) Max working:
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationRadial piston hydraulic motor Hägglunds CAb
Radial piston hydraulic motor Hägglunds CAb RE 15354 Edition: 12.2016 Replace: 01.2015 Frame Size: CAb 10, 20, 30, 40 Displacement: 503 2 513 cm 3 /rev [31-153 in 3 /rev] Specific torque: 8 40 Nm/bar [407
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationDIRECT CURRENT MOTORS
DIRECT CURRENT MOTORS Technical Catalogue November 2 web edition Index DC motors Description Type Page Introducion 2 V DC -.35 kw - D. 2521 V DC -. kw - D. 252 6 V DC - kw - D. 252 V DC - kw - D. 253
More informationHydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
More informationVSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000
Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve
More information3PE. Aluminium gear pumps. Technical Catalogue E IM03
3PE Aluminium gear pumps Technical Catalogue GEAR PUMPS E - B - C SERIES General Features GEAR PUMPS SALAMI gear pumps are available with displacements from 1.4 cm 3 /rev to 99 cm 3 /rev (from 0.09 cu.in/rev
More informationInstruction manual. Installation requirements. Power Take-Off. Pump mounting: Spline shaft DIN 5462 / ISO 14. Mounting flange ISO 7653-D.
GB PUMP SCPD 76/76 DIN Instruction manual Thank you for choosing Sunfab You have chosen SCPD 76/76, a dual flow pump with the highest displacement-to-size-ratio on the market. It can effectively be directly
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationDischarge rate* 2 L/min MPa (DE10-1) 37.8 MPa (DE10-7)
D VANE PUMPS D VANE PUMPS Operating pressure MPa {kgf/cm } Maximum Rated Discharge rate* L/min Permissible min Page DS DSP 7 {7} 7 {7} to D- MD Motor pumps incorporating a DSP D-4 DP DP DP DP 7. {7} 4
More informationHydraulic cylinders type CC - round heads with counterflanges to ISO nominal pressure 25 MPa (250 bar) - max 32 MPa (320 bar)
www.atos.com Table B-/E Hydraulic cylinders type CC - round heads with counterflanges to ISO 60 - nominal pressure MPa (0 bar) - max MPa (0 bar) SWC Cylinders Designer Software for assisted selection of
More informationTPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Single Pump Installation Drawing Tandem Pump Installation Drawing Mounting Flanges and Shaft Details Rear Pump Mounting Flanges
More informationMOTORS MV HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
OTORS V HYDRAULIC OTORS T E C H N I C A L C A T A L O G otors V - Hydraulic otors POCLAIN HYDRAULICS OVERVIEW Displacement Speed V2 V3 aximum cm³/rev [in³/rev.] From 3 [2.14] to 3 [3.23] From [3.3] to
More informationTHE PRODUCTION LINE OF PONAR WADOWICE
PONAR Wadowice S.A. ul. Wojska Polskiego 29 34-100 Wadowice Tel.: +48 33 488 21 00 Fax: +48 33 488 21 03 E-mail: ponar@ponar-wadowice.pl Web: www.ponar-wadowice.pl THE PRODUCTION LINE OF PONAR WADOWICE
More informationHydraulic Pump VP1-120
REECHSROY GROUP REECHNOLOGY Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 U/UK1 odernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management
More information3.5PC. Aluminium gear pumps. Technical Catalogue E IM04
3.5PC Aluminium gear pumps Technical Catalogue GEAR PUMPS E - B - C SERIES General Features GEAR PUMPS SALAMI gear pumps are available with displacements from 1.4 cm 3 /rev to 99 cm 3 /rev (from 0.09
More information5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
More informationHigh Torque Low Speed Motors MRT - MRTE - MRTF
High Torque Low Speed Motors MRT - MRTE - MRTF Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationDenison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed Circuits
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Denison GOLD CUP Product Catalog Piston Pumps & Motors For Open & Closed
More informationPM50 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G
PM50 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G PM50 - Variable displacement pump POCLAIN HYDRAULICS OVERVIEW PM50 is a variable displacement, axial piston pump, with
More informationRA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps. V Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationM7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company
Precision Machinery Company Swash Plate Type xial Piston Motor M7X / M7V Series QULITY HYDRULICS LTD WHINBNK PRK WHINBNK ROD YCLIFFE INDUSTRIL PRK NEWTON YCLIFFE CO. DURHM DL5 6Y TEL. 01325 317755 FX.
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
More informationHydraulic Pump Series VP1 Variable Displacement
Variable Displacement Catalog 9129 8222-02 February 1999, GB Content Page General information 3 Design 3 Specifications 4 Ordering information 4 VP1 cross section 4 Installation dimensions 5 Line dimensioning
More informationHPC. Dual Displacement Staffa Radial Piston Motors HT 18 / C / 150 / 1007 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationRS* /110 ED DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30. Q max (see table of performances) THREADED PORTS CARTRIDGE TYPE
31 200/110 ED RS* DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30 THREADED PORTS CARTRIDGE TYPE p max (see table of performances) Q max (see table of performances) OPERATING PRINCIPLE The RS* and RS*-I
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationGear Pumps - AP05. Reference: 200-P EN-05 1/26. Issue:
Gear Pumps - Reference: 200-P-991218-EN-05 Issue: 09.2015 1/26 Contents Page 1 General information... 3 1.1 Introduction to the product... 3 1.2 Non-standard symbols used in the text... 4 2 Technical information...
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationProduct Manual. VIKING EN397-4a 2009
Product Manual VIKING EN397-4a 29 One partner all over the world Hägglunds Drives is one of the worlds leading manufacturer of heavy duty hydraulic drive systems. If what you need is Worldwide distribution
More informationFormulated for better protection, longer oil life and better system efficiency. Extra protection Industrial applications
SHELL TELLUS INDUSTRIAL HYDRAULIC FLUIDS The Shell Tellus range of hydraulic fluids is designed to help make it easy for equipment operators to select the Shell lubricant that will best deliver value to
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flow and an additional piggybacked gear pump for auxiliary service, open
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 114 / 0814 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More information